Problem with the "lenovo Rescue And Recovery" system. (lenovo 3000 N500).

hi!
yesterday i ran Kaspersky virus scan tool and it detect file named "tvtfilter.sys" as suspicious file and thefore delet it.
today when i was restart my laptop, i got error message on startup that say:
Microsoft Visual C++ Runtime Library Runtime Error! "C:\Program Files\Lenovo\Rescue and Recovery\rrservice.exe" abnormal program termination.
after some google search i've understand that "tvtfilter.sys" was critical file of "Rescue And Recovery" system.
so, any one with "Rescue And Recovery" running on his laptop can upload for me this file?
it's located in "C:\WINDOWS\SYSTEM32\DIRVERS\" and it's name is "tvtfilter.sys"
thank you!
BTW, ive tried to re-install it but it wont let me because of some error message

Hi eitrnel,
Just a thought: give a try to un-intsall the Rescue and Recovery from the Control Panel first before re-installing it.
Cleo
WW Social Media
T61, T410, x240, Z500, Flex 14
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Similar Messages

Ideas to improve the Rescue and Recovery System

Hi,
some weeks ago I ned to restore my system, while this process there was some difficulties with the Rescue and Recovery. But First my configuration:
I'm using a T61p with Windows Vista Ultimate installed.
On the System there are 5 Partitions
1. Rescue and Recovery
2. Windows Bootstrap
3. BitLocker Encrypted Windows Partition
4. Linux /boot
5. Encrypted Linux LVM
So, one morning I tried to start my ThinkPad and nothing worked anymore. After a Short time I found out that the boot sector of the windows bootstrap partition was corrupted. The Linux Partition worked fine and was startable with a GRUB CD-Rom.
Ich checked out the Rescue and Recovery system and was sad that I isn't possible to recover the boot sector of the bootstrap partition. The only way to rescue my system was to reinstall windows at all!
Thats a bad solution, because you can recover the boot sector with every OEM-DVD of Windows Vista, but this DVD is not available for a ThinkPad user.
So I backuped my files and reinstalled the system. While the reinstallation process rescue and recovery gives the option to install windows on C:. But on such a multiboot configuration it is not very clear what drive C: is. After some experiment I think he is taking the first parition after Rescue and Recovery or the first free space after it. At this place it would be much better if I can choose a parition for the installation.
So, if a Lenovo engineer is reading this, please think about to:
- Include some tools like boot sector recovering in the Rescue and Recovery system
- Adding a mode where you can choose the parition to install Windows.
Over and above that I'm really happy with my ThinkPad.
Thanks for reading.

Greetings,
This isn't so much a reply to Cobelius, or a solution, but a commiseration of sorts. Or at least an "I hear ya, buddy, I wish they'd improve some things about Rescue and Recovery, too."
I notice that no one else has replied to this thread. I hope at least that someone will read these posts, and pass 'em on to the appropriate developers.
Here's my story:
I am, overall, extremely happy with my brand, spanking new T500. So far, I'm only running a single OS, Vista Business 64.
However, I did make the following 'tweaks' to my setup, which brings out the flaws in the Rescue and Recovery software:
1) I used Truecrypt 6.1a to encrypt my system partition (leaving the original rescue partition intact)
(Side Note: Where my original drive C came with tons of empty space, I used DISKPART to shrink it a bit an created another primary partition as drive D. Hey, why the heck not? Originally, I wanted TrueCrypt to encrypt the entire drive, but this failed. Truecrypt said this was due to a hardware failure, but 20 hours of my life wasted scanning the drive with HDD Regenerator 1.51 revealed no bad sectors. So now Drive D is encrypted as an ordinary TrueCrypt container and mounted upon login. I'm okay with this solution, but if anyone wants to research why TrueCrypt couldn't do the whole disk, you have my thanks in advance.)
2) I bought a Maxtor BlackArmor(tm) hardware-encrypted USB external drive to use for my backups. I successfully used the Lenovo Rescue and Recovery tool to both create specific file backups as well as to image my entire drive C onto the BlackArmor device, once I mounted it (by running a built-in executable and supplying it with my secret password)
3) I set a Lenovo BIOS password for unlocking the boot hard drive.
So far, so good. I type the BIOS drive password, then theTrueCrypt password, and Vista takes over 12 minutes to become usable and, well, that's a Microsoft issue, isn't it?
But, here's the deal: WHAT IF I CAN'T BOOT FROM THE HARD DRIVE ANYMORE? Well, TrueCrypt made me create a bootable rescue CD which can restore my encrypted boot sector or permanently decrypt my hard drive. What it can also do is let me press the ESC key to boot without providing a password, which does a supposedly wonderful thing -- since it fails to boot my drive C, it takes me straight into the Lenovo Rescue And Recovery session.
The problem is, the Lenovo boot (version 4) takes me AUTOMATICALLY into a self-repair utility which wastes another 10 minutes of my time to finally tell me --d'uh-- that my boot sector is 'corrupted' (it isn't; it's merely ENCRYPTED by TrueCrypt. As it should be).
FLAW NUMBER 1: Rescue and Recovery should provide a default menu where automatic diagnosis is a CHOICE the user can elect not to make, or abort if it has begun.
FLAW NUMBER 2: You guys should enhance what appears to be a Vista PE environment (or BartPE, or whatever) with a few utilities, including an Explorer-like browser to examine the disk (which would snow nothing in my case, as my drives are encrypted), and a command prompt, and the ability to launch executables. The environment should also recognize USB drives.
As it happens, I used a third-party Vista PE rescue CD, Active@ Partition Recovery, to boot an environment having the utilities I needed. Using this tool, I was able to recognize a USB key that had TrueCrypt installed in 'traveller' mode (no windows registry keys needed). Running this app and providing my truecrypt password enabled me to unlock my Drive C, albeit by mounting it as another drive letter. This made it possible to read and write to my disk.
The encrypted Maxtor drive is visible, too, from this boot environment, but it appears as a CD-ROM drive, and yields no secrets until you run an executable file on it and enter the drive's password. And that worked, too. So I could find files to copy over to my hard drive, if I needed to.
However, in order to RESTORE files to my drive, I'd still need to be able to run Rescue and Recovery, or at least the Recovery portion. Which brings me to:
FUNDAMENTAL FLAW NUMBER 3: You need to create a Recovery tool that can run from within an external USB drive, without requiring shared .DLLs in various subfolders or windows registry entries. Lord knows, I certainly tried to copy RestoreNow.exe from C:\Program Files (x86)\Lenovo\Rescue and Recovery onto my Maxtor drive, along with whatever DLLs it called for, but it was hopeless. The damned thing just wouldn't run from the USB drive on the PE environment.
The way I see it, then, is that there really is no way to restore my hard drive should I suffer a catastrophic failure. Major bummer.
FUNDAMENTAL FLAW NUMBER 4: When I got my laptop, I created a series of recovery disks using the Lenovo supplied software. Booting with the first CD, however, only proved depressing, as I had to agree that the ONLY purpose for this CD was to recover my PC to factory-shipped condition. Which meant erasing my drive and restoring it with the contents of the other DVDs. But I want to restore what I backed up with Rescue and Recovery! My life SINCE the laptop shipped from the factory! Geez, Louise, why not let me choose to do THAT, too?
(Of course, the boot CD would need to allow me to execute the Maxtor program that unlocks my encrypted USB drive, and also let me execute TrueCrypt to unlock my hard drive.)
I sure hope someone forwards this to a developer who'll take it seriously, after s/he stops chuckling. You guys should just ship a usable Vista PE rescue CD with every laptop, I think. And a recovery-only tool that doesn't need DLLs or Registry Entries to run. It would help in so many ways.
In the meantime, I guess I'd better do all I can to ensure my laptop's hard drive doesn't die on me.
Again, other than for this teeny problem that "don't amount to a hill o' beans in this crazy world," I'm really happy with my T500.
Thanks for reading this, too. And happy holidays.

Help with Lenovo Rescue and Recovery 4.31

Hello,
I work for a company that uses Ghost images for deploying laptops. We have recently decided to try the Lenovo Rescue and Recovery software built in with the new T520s when doing our local backup before sending the laptop out to the user.
What we decided to try is building the base image, creating the backup locally on the computer using R&R, dumping the image to our server using Ghost and then imaging other laptops with that image.
Our reasoning for creating the local backup first, is that time is not that big of an issue when creating the initial image, and neither is imaging other laptops because we create spares that we have built and ready to go out. What we would then do is apply any updates since the laptop was imaged, and have R&R create an incremental backup again, which would only take a few minutes and the laptop would be ready to ship.
Upon using this method, we have found that you cannot view the original first backup created in R&R on a laptop that it was not created with. The backup content is there, as the drive space is used and booting into a DOS prompt and browsing the C:\RRbackups\SZ\<UID>\ folder shows the data.
What I'm looking to know is how the R&R software generates that UID, and if anything can be done to allow the other laptops to recognize, whether it's rename the folder with a UID that the new laptop is going to use, or if it's something within the software files that's changable. Or even the registry.
Any ideas or suggestions would be great.
Thanks!

kylejg, welcome to the forum,
R&R is a little system specific. How many systems are you expecting to deploy using the method you describe?
It might be worth taking a look at the "Big Brother" of R&R namely Image Ultra Builder as it should be able to, with ease, realise exactly that which you are aiming for.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

T61 Lenovo Rescue and Recovery BSOD

Hi,
I've got a problem booting into the Lenovo Rescue and Recovery partition.
System is a T61 (64665DG) with Rescue and Recovery 4.21.1016.00
I receive the following BSOD message:
A problem has been detected and windows has been shut down to prevent damage.
If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:
Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
Technical information:
***STOP: 0x0000007B (0xF78D6528,0xC0000034,0x00000000,0x00000000)
It seems to be a problem with the AHCI controller not being supported. When I switch the SATA Controller Mode from AHCI to Compatibility in the BIOS it then successfully boots into the Rescue and Recovery environment.
Why is it missing the correct AHCI driver? It used to work fine with the older version of Rescue and Recovery in AHCI mode. Is there a fix available for the Rescue and Recovery software to allow you to run it without having to put the SATA controller in AHCI mode?
-Indie
Solved!
Go to Solution.

Thanks both for your replies. The inability for it to boot the Rescue and Recovery partition in AHCI mode persuaded me to examine the contents of the partition for anything obvious amiss. Using Linux I was able to mount the FAT partition and have a nose around. In the /minint/system32 directory it's got a number of sub-directories for the Intel Iastor driver - that used to access the HD in AHCI mode. I couldn't find any reference to that in txtsetup.sif and the winpeoem.sif file was empty. After some Googling I found out that you can easily load additional mass storage drivers using winpeoem.sif.
IBM have a program called rrutil.exe that allows you to access the RnR partition from within Windows, it's part of the Rescue and Recovery Administrator Tools.
To modify winpeoem.sif first install the RnR admin tools and open a command prompt window in the install location - C:\SWTOOLS\TOOLS\Z652_Admin016. Make sure the C:\Temp directory exists and is EMPTY - this is very important. You then need to create a "getlist.txt" file:
echo \minint\system32\winpeoem.sif > getlist.txt
retrieve the file from the RnR partition
rrutil.exe -g getlist.txt C:\Temp
type
notepad C:\Temp\minint\system32\winpeoem.sif
and paste in
[Version]
signature="$Windows NT$"
[OemDriverParams]
OemDriverRoot=""
OemDriverDirs=IASTOR
upload the changes with (this will write everything from Temp to the RnR partition!)
rrutil.exe -p C:\Temp
Or you could just modify /minint/system32/winpeoem.sif directly in Linux without messing about with the rrutil.exe.
With this small modification to winpeoem.sif I was able to successfully boot into the Lenovo Rescue and Recovery partition with AHCI mode enabled. I haven't tried reinstalling windows xp with this fix.
-Indie

I'm Having problems with the video freezing and the sound carrying on since I up graded my iPad to ios8 BBC IPLAYER

I Am having problems with the video freezing and the sound carrying on whilst watching BBC IPLAYER ITV PLAYER until I reboot video and the problem acures again

Your Mac runs maintenance in the background for you.
Command + R gives you access to restore, repair, or reformat the drive using OS X Recovery
No idea why that was suggested.
You may have a third party video player installed that's causing an incompatibility issue.
Check these folders:
/Library/Internet Plug-Ins/
/Library/Input Methods/
/Library/InputManagers/
/Library/ScriptingAdditions
~/Library/Internet Plug-Ins/
~/Library/Input Methods/
~/Library/InputManagers/
~/Library/ScriptingAdditions
The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
To access the Home folder in OS X Lion or Mountain Lion, open the Finder, hold the Option key, and chooseGo > Library.

I have a problem with the effect gallery and the saving libraries in Illustrator CS6

Hi everybody
I have a problem with the effect gallery and the saving libraries in Illustrator
1. When you go to to effects > effect Gallery the the sketch filter always is black and white. Is this normal? In Photoshop you can set your background and foreground and the sketch effects takes those colors. Is there any way to do this in Illustrator? I have tried changing the colour of the fill and stroke but nothing...
2. In the same area as before effects > effect Gallery .... In Photoshop you can add multiple filters with the create new button. Always is off is there anyway to make it available? or the only way is to by creating several individual ones and manage then in the appearance panel ...
3. I saved a brush library and now it appears in the user defined area so I can get it in any document, that is good but any one knows how to delete a user undefined library?
Many thanks in advance for the help .... I look forward for the reply =)

I see that it is six months ago that I first posted this. Nothing has changed. When I use affixa to create a message with an attachment from my gmail account in firefox, the message is created in drafts, but the gmail window is closed and I have to re-open it. Not critical, but annoying.
Now there is a plug-in on the affixa site that is supposed to be designed for Firefox, and which affixa support claims should take care of this. And I've downloaded it twice. When you download it and open it, it says that it will be installed when Firefox restarts, and gives you a button to restart Firefox. But after you click that button and firefox disappears and re-appears, the affixa plug-in is NOT in the plugin list.
Please, somebody, HELP.

Apple new macbook pro dosent have a disk drive. Does the older model have a problem with the disc drive and so is removed in the new model?

apple new macbook pro dosent have a disk drive. Does the older model have a problem with the disc drive and so is removed in the new model?

No. Apple replaced the disk drive with a solid state drive (SSD) instead. The SSD is faster the old disk drive.
Allan

I'm having a problem with the application Dropbox and I want to uninstall it. In finder it does not allow me to move it to trash telling me the dopbox application is open. How do I close it? when it shows up nowhere as an open application?

I'm having a problem with the application Dropbox and I want to uninstall it. In finder it does not allow me to move it to trash telling me the dopbox application is open. How do I close it? when it shows up nowhere as an open application?

Is there a DropBox icon up in the menubar you can click on & see quit DropBox?
https://www.dropbox.com/help/41

I fixed the problem with the whole 'waiting' and not loading but now some of my apps won't open, what can I do?

I fixed the problem with the whole 'waiting' and not loading but now some of my apps won't open, what can I do?

- Try a reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Purchase/install any new app
- Try the remaining items of:
iOS: Troubleshooting applications purchased from the App Store

I have problem with the security questions and i dont know the answer. How i change the questions ?

I have problem with the security questions and i dont know the answer. How i change the questions ?

See Here... ask to speak with the Account Security Team...
Apple ID: Contacting Apple for help with Apple ID account security
Or Here > Apple Support iTunes Store Contact

Why I had no problems with the VZW employees and other people have?

I think that most people who cannot resolve problems with the VZW have an attitude problem.
Wise saying: you can get more with honey than with vinegar.
Since I “upgraded” my old Samsung Sway to a new Samsung Intensity III, in the past three weeks I spent many hours dealing with the VZW store employees, customer service reps, and tech support people. The phone was replaced two times, and I had no problem getting the replacements.
The third phone did not working how I expected.
Today I called VZW customer service and said I don’t need anymore trouble shooting and I wanted find a resolution, which will be satisfactory to both of us. After a short conversation with a customer service rep, I was connected with a tech support. I told him that I don’t need any more trouble shooting on the Samsung Intensity III because I already spent HOURS doing that on three devices.
We spoke about what the VZW could offer me, about replacements with different phones, etc. Our conversation ended with me offering the resolution that could satisfy me, which was to keep this phone and my account will be credited for the $30.00 “upgrade” fee and I will buy Samsung Sway on eBay. NO PROBLEM.
My account was credited and I was advise about the ESN number and activation.
Why I had no problems with the VZW employees and other people have? The answer is simple. I did not have attitude when I was spoke to them.
So if you want the problem to be resolved, put your anger in you pocket before you start the conversation. You can say that you are angry, frustrated, etc like I did, but add that you understand that this is not their fault that the manufactures makes a crap phones.

Yes, you are right. I lost my upgrade. Also, it’s true that I could buy the phone on eBay… if I knew then what I know now. In the past, I never had problem with any of my phones. Doing an upgrade with the VZW was a normal thing for me. I didn’t expect that Samsung Intensity III would be a junk phone. My last upgrade was 4 years ago. I had $50.00 ‘new every two’ credit on my account, which was used for an upgrade. I lost the $50.00 credit paying for Samsung Intensity III. Sometimes we learn from our mistakes or from a bad experience. Three weeks ago I did not know that I could buy a phone on eBay and activate with VZW without paying $30.00.
Samsung Sway is coming from …eBay – keep your fingers crossed for me.

Lenovo rescue and recovery will not run a new backup

Tried several times to make a new backup using "rescue and recovery" (i've done this regularly over the years) .. But "rescue and recovery" freezes and then shuts the computer down. This has happened at least 4 times so far.
x201....3249-CTO....i7....4GB RAM....64-bit OS....Windows 7

1. What are the current and previous versions of R&R? When it was upgraded?
2. Did you have the such issue with previous R&R version?
3. Did you try to uninstall previous version and install the new one? Or reinstall the current version? How current vesrsion is upgraded from the previous one - manually or using System Update?
4. Was your OS version upgraded from previous one? I mean as an example XP -> W7
x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
Do it well, worse becomes itself
Русскоязычное Сообщество English Community Deutsche Community Comunidad en Español

Problems with the home button and generally freezing and shutting down often.

I have had this iPad 2 for around 3 months. After about a month I noticed that I was having to press the home button multiple times in order to get it to respond. It is now at a stage where I have to press it as many as 12-13 times. It's won't do this every time but all day for maybe 3 out of 5 days the other times it works fine.
As well as this I have also had issues with the Internet shutting down, Skype going crazy, picture albums popping up and then vanishing and so on. I'm not a computer wiz but I would describe it as going crazy two or three times a day.
While I was in a shopping centre about a week ago I asked about the problems in an apple store. The man was very helpful and asked if I had it on me so he could look at it. Unfortunately I didn't be he said I could bring it back whenever I like and it would take around 30 mins for someone to check it out. He said most Likley they would just give me a new one and that would be that. So of course happy that it could be sorted I went home. Today I decided to drive the nearly two hours down to Brisbane after having a nightmare time trying to Skype my friend this morrning. I hot to the store and asked if it could be looked at only to be told I need an appointment. I showed the card that I had been given and explained what I had being told. To cut a long story short he agreed that I had been told that but said the assistant clearly didn't know what he was on about and that I should come back. I offered to wait but dispute the shop being more full of staff watching movies and downloading songs then actual customers I was basically denied any sort of help and told to call the office to arrange an appointment.
Sorry to rant! I just thought that apple were renowned for good service? 5 hours later I'm home with the same issues.
If anyone has had similar problem with the device or even customer service I would be intrested.
Regards,

Me too! I had many bugs and returned my phone for a brand new one that did this the first time it was turned on at the Apple store. I was told it is a "software issue" and to "reboot the phone" if it continued to happen. It happens almost every time I try to use my phone. I've rebooted three times in a row some days. Nothing really seems to help. I keep waiting for an update.

Is anyone having problems with the Health App and Withings?

After upgrading to ios 8.1 I am still having a problem getting my Withings Health Mate data to correctly update my Healt Dashboard. The information that does show up on the different Dashboard widgets is way off. For example, I today walked 2400 steps according to Withings, but the Health Dashboard shows 10,700 steps (720,000 in smaller print on another line). It further shows my daily average at 313,000 steps! Ridiculous.
Walking/Running distance for the days shows 22.5 miles with a daily average of 108 miles.....I'm not Barry Allen/The Flash.

My problems with the Healt App are all over the map. The information on Withings Health Mate is totally accurate, and updates immediately. I have their scale (since 2011) and wireless blood pressure monitor. Also, I find the heart rate senson on the iPhone 6 to work well, every time.
This issue for me is with Apple's Health app. I get ridiculous readings on the Dashboards. For example, it shows my daily average in steps as 170,688, and miles walked at 80. Hardly! Additionally, the Dashbord widgets will disappear/reappear for no reason. I have tried switching the priority of data sources for the steps dashboard between Withings and my iPhone 6 (because it is indicated that the top source governs the dashboard info), to no avail.
Lastly, I don't know how to interpret the infomration on the individual dashboards. On the same line as the word "Steps" there is a number, i.e. 14,272 steps, and just under it the word "Today." However, when I switch from "Day," "Week,," "Month," and "Year," those number don't change. Below the word Today is a number (which changes all the time), and at the bottom of the widget, just above the month (October now) is the number 1,149,749. Nice.
I would like to get the Apple Watch next year, but if the Health App cannot be fixed I may not.

Help In keithley 2400 VI!!(Problem with the data logging and graph plotting)

Hi,need help badly=(.
My program works fine when i run it,and tested it out with a simple diode.The expected start current steps up nicely to the stop current.The only problem is when it ends,i cannot get the data log and the graph,though i already have write code for it.Can someone help me see what's wrong with the code?I've attached the necessary file below,and i'm working with Labview 7.1.
Thanks in advance!!!
Attachments:
24xx Swp-I Meas-V gpib.llb ‏687 KB

Good morning,
Without the instrument it might be hard for others to help
troubleshoot the problem. Was there a
specific LabVIEW programming question you had, are you having problems with the
instrument communication, are there errors?
I’d like to help, but could you provide some more specific information
on what problems you are encountering, and maybe accompany that with a simple
example which demonstrates the behavior?
In general we don’t we will be unable to open specific code and debug,
but I’d be happy to help with specific questions.
I did notice, though, that in your logging VI you have at
least one section of code which appears to not do anything. It could be that a small section of code, or
a wire was removed and the data is not being updated correctly (see pic below). Is your file being opened properly? Is the data being passed to the file
properly? What are some of the things
you have examined so far?
Sorry I could not provide the ‘fix’, but I’m confident that
we can help. Thanks for posting, and
have a great day-
Message Edited by Travis M. on 07-11-2006 08:51 AM
Travis M
LabVIEW R&D
National Instruments
Attachments:
untitled.JPG ‏88 KB

Problem with the "lenovo Rescue And Recovery" system. (lenovo 3000 N500).

Similar Messages

Maybe you are looking for