Problem with the streams....

Dear All,
I am trying to zip a file in the client side and sending it to the server side machine......there, i am trying to unzip it and writting it over there...for this, i am using a seperate program in the client side and in the server side.................................
In the client program, after opening all the necessary streams and all formalities, i am using the code...
"InputStream in = urlconnection.getInputStream();
while (in.read()!=-1);"
only if i use the above code, the zipped file is transfered to my server machine...but in this case, the link with the server is not getting disconnected...i mean the command prompt remains alive, without stopping...what i inferred is, my control is got into the above said "InputStream in = urlconnection.getInputStream();"...indefinitely...
so i tried of removing the above said statement.....in this case, the zipped file is NOT getting written in my server machine....
what to do???
any suggestions please...waiting for the reply very anxiously, refreshing this site for every 2 minutes....
sakthivel s.
snippet code for ur reference...
Client side
try
ZipOutputStream zipoutputstream = new ZipOutputStream(urlconnection.getOutputStream());
ZipEntry zipentry = new ZipEntry(filename);
zipentry.setMethod(ZipEntry.DEFLATED);
zipoutputstream.putNextEntry(zipentry);
byte bytearray[] = new byte[1024];
File file = new File(filenamedir);
FileInputStream fileinputstream = new FileInputStream(file);
BufferedInputStream bufferedinputstream = new BufferedInputStream(fileinputstream);
int length = 0;
while((length=bufferedinputstream.read(bytearray)) != -1)
zipoutputstream.write(bytearray,0,length);
fileinputstream.close();
bufferedinputstream.close();
zipoutputstream.flush();
zipoutputstream.finish();
zipoutputstream.closeEntry();
zipoutputstream.close();
InputStream in = urlconnection.getInputStream();
while (in.read()!=-1); // the said while loop....................
System.runFinalization();
urlconnection.getInputStream().close();
urlconnection.disconnect();
the way of connecting witht the server : (just a snippet of the code)
URL serverURL = new URL("http://192.168.10.55:8001/servlet/uploadservlet");
HttpURLConnection.setFollowRedirects(true);
urlconnection= (HttpURLConnection)serverURL.openConnection();
urlconnection.setDoOutput(true);
urlconnection.setRequestMethod("POST");
urlconnection.setDoOutput(true);
urlconnection.setDoInput(true);
urlconnection.setUseCaches(false);
urlconnection.setAllowUserInteraction(true);
urlconnection.setRequestProperty("Cookie",cookie);
urlconnection.connect();
Server Side:
javax.servlet.ServletInputStream servletinputstream = httpservletrequest.getInputStream();
ZipInputStream zipinputstream = new ZipInputStream(servletinputstream);
ZipEntry zipentry = null;
String directory="c:\\test"; // the unzipped file should be written to this directory...
try
File file = new File(directory);
if(!file.exists())
file.mkdirs();
catch(Exception exp)
{System.out.println("I am from Server: " + exp);}
try
zipentry = zipinputstream.getNextEntry();
if(zipentry != null)
int slash = zipentry.getName().lastIndexOf(File.separator) + 1;
String filename = zipentry.getName().substring(slash);
File file1 = new File(directory + File.separator + filename);
FileOutputStream fostream = new FileOutputStream(file1);
BufferedOutputStream bufferedoutputstream = new BufferedOutputStream(fostream);
byte abyte0[] = new byte[1024];
for(int index = 0; (index = zipinputstream.read(abyte0)) > 0;)
bufferedoutputstream.write(abyte0, 0, index);
servletinputstream.close();
bufferedoutputstream.flush();
bufferedoutputstream.close();
zipinputstream.closeEntry();
zipinputstream.close();
fostream.flush();
fostream.close();
catch(IOException ioexception)
{System.out.println("IOException occured in the Server: " + ioexception);ioexception.printStackTrace();}
P.S: I am not getting any error in the server side or cleint side...the only problem is, the command prompt(where i am running my cleint program) is getting standing indefinitely...i have to use control-c to come to the command prompt again...this is because of the while looop said in the client machine....if i remove it...the file is not gettting transfered...what to do????

Some thoughts:
1) please quote your code so it's readable (see http://forum.java.sun.com/faq.jsp#messageformat ).
2) why are you calling "System.runFinalization();"?
3) Offhand I don't see where the read would ever stop. It's waiting for an end of input from the server, but the server doesn't even begin to write output to it. What happens when you connect to your server with a browser or some other client?
4) is it really wise to read and write one byte at a time?

Similar Messages

  • HT4628 Intermittent reception when streaming music via Airport Extreme and Airport Express to powered speakers. Is this a problem with the Extreme?

    i get intermittent reception when I stream music from I Tunes via Airport Extreme and Airport Express to powered speakers. I Tunes continues to play uninterupted on the Mac.  The problem does not lie with the Express as it occurs on both of my 2 Express at the same time. is this a problem with the Extreme?

    Well, repying to my own post... Might have found the solution: I tried to do the same with a Macbook Pro 2010 using the very same setup. And it worked perfectly! No freeze, no nothing.
    One explanation I see:
    my iMac is dating back to May 2007, a Core 2 Duo 2,16Ghz with 2 Go of RAM.
    So the computer's characteristics (or the Wifi component or the combination of all of this) might be not robust enough to allow streaming to those 2 devices...
    Anyone's got anything to add?

  • Deleting photos in photo stream.....i,m always following the instructions on my pc to delete photos in the icloud, but there is coming always a message-there is problem with the server....this result i saw some few days!!

    I want to delete photos in the icloud from my pc and i,m following and understand the instructiones from your system, but in every time i must read a message - there is a problem with the server connection.
    What is the solution or when will be solved the problem?
    Best regards
    Tunk2412

    Dear Carolyn,
    thx xo much for your support, but the problem is not solved.
    Thx so much to sent me the instruction comments for the customer support, but there is always coming a message......
    "You cannot reset the photostream, because there is a problem with the server connection. Please try again later."
    This message is coming since 4 days.
    It will be very helpful, to get a message, when Apple will be solved the problem.
    Thx so much.
    Best regards
    Tunk2412

  • Problems with the Proxy Programme--Please help

    Hi All,
    I have written a simple proxy server in the form of a servlet. I changed the proxy config of my browser to connect to this servlet hosted on the default context(http://localhost:8080) of the Tomcat 5.0.25 . Well , this servlet internally connects to the proxy of the corporate LAN . The logic that I have applied is as follows. The servlet gets the request from the client (ie the browser in this case) , extracts the headers and contents from the request, sets them to a new request that it forms and finally send this new request to the proxy. When the proxy responds, the servlet collects the response headers and contents adn writes them in its response. To sum up , this servlet transparently carries the requests and responses between the client(browser) and the corporate LAN proxy. Now the problem is this. Let's say , now I am accessing http://www.google.com.The browser sends a request to my servlet with the following headers as they are extracted by my servlet.
    ProxyServer:::>posting request
    ProxyServer:::>headerValue::> headerName = accept : headerValue=*/*
    ProxyServer:::>headerValue::> headerName = referer : headerValue=http://www.google.com/
    ProxyServer:::>headerValue::> headerName = accept-language : headerValue=en-us
    ProxyServer:::>headerValue::> headerName = proxy-connection : headerValue=Keep-Alive
    ProxyServer:::>headerValue::> headerName = user-agent : headerValue=Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0; UB1.4_IE6.0_SP1; .NET CLR 1.0.3705; .NET CLR 1.1.4322)
    ProxyServer:::>headerValue::> headerName = host : headerValue=www.google.com
    ProxyServer:::>headerValue::> headerName = cookie : headerValue=PREF=ID=1be27c0a74f198ca:TM=1082058853:LM=1082058853:S=bu6ORrygzm8AUkm8
    ProxyServer:::>postRequest
    I set these headers into a new connection opened to the proxy and post a fresh request to the proxy,which, in turn responds with the following headers.
    ProxyServer:::>posted request successfully
    ProxyServer:::>writing response
    ProxyServer:::>writeResponse-->headerName = Proxy-Connection : headerValue = [close]
    ProxyServer:::>writeResponse-->headerName = Content-Length : headerValue = [257]
    ProxyServer:::>writeResponse-->headerName = Date : headerValue = [Tue, 13 Jul 2004 14:01:40 GMT]
    ProxyServer:::>writeResponse-->headerName = Content-Type : headerValue = [text/html]
    ProxyServer:::>writeResponse-->headerName = Server : headerValue = [NetCache appliance (NetApp/5.5R2)]
    ProxyServer:::>writeResponse-->headerName = Proxy-Authenticate : headerValue = [Basic realm="Charlotte - napxyclt2"]
    ProxyServer:::>writeResponse-->headerName = null : headerValue = [HTTP/1.1 407 Proxy Authentication Required]
    ProxyServer:::>writeResponse exiting
    ProxyServer:::>wrote response successfully
    I write these headers back to the client. According to what I was thinking, the client ie the browser would open a new dialog box asking for username/password owing to the presence of the "Proxy-Authenticate " header. But it does not happen that way. Rather the browser stops responsding and displays a blank page. Does anyone know why it happens this way? I am pasting the server prog below for everybody's reference.
    package server.proxy;
    //import all servlet related classes
    import javax.servlet.*;
    import javax.servlet.http.*;
    import java.util.*;
    import java.io.*;
    import java.net.*;
    import server.resources.*;
    //My Proxy server --->Currently it is very simplea and relies on
    //other proxy servers of an already connected network.
    public class ProxyServer extends HttpServlet
    //stores the resource bundle
    private ServerResBundle resBundle = null;
    //checks for the mode of operation
    private boolean proxySet = false;
    private String proxy = null;
    //storing the original System out/err etc
    private PrintStream sysOutOrig = null;
    private PrintStream sysErrOrig = null;
    private InputStream sysInOrig = null;
    //initialise certain features that are required later
    public void init() throws ServletException
    try
    //initialise the resource bundle
    this.initResBundle();
    System.out.println("ProxyServer:::>res bundle init");
    //set the mode of operation
    this.setMode();
    System.out.println("ProxyServer:::>mode set");
    //set the system out and err --System.setOut etc
    this.setSystemOutErr();
    System.out.println("ProxyServer:::>in/out/err set");
    }//End try
    catch(Exception e)
    System.out.println("Exception in init..."+(e.getMessage()));
    throw new ServletException(e);
    }//Edn
    catch(Throwable e)
    System.out.println("Irrecoverable Error...");
    throw new ServletException(e);
    }//End
    }//End init
    //method to init the resource bundle;
    private void initResBundle()
    this.resBundle = ServerResBundle.getBundle();
    }//End
    //method to set the mode of the server--proxy or direct
    private void setMode()
    //read the target proxy property from the bundle and
    //if it is set,take that URL
    String temp = (String)(this.resBundle.getResource(ResKeys.PROXY_SERVER));
    if ( (temp != null) && (temp.length() > 0) )
    this.proxySet = true;
    this.proxy = temp;
    temp = null;
    }//End
    }//End
    //method to set the system out and err etc
    private void setSystemOutErr() throws Exception
    //keep a copy of the original system out and error
    this.sysOutOrig = System.out;
    this.sysErrOrig = System.err;
    try
    //read the options adn if they are set, take the values directly
    String newOutStr = (String)(this.resBundle.getResource(ResKeys.SYSTEM_OUT));
    String newErrStr = (String)(this.resBundle.getResource(ResKeys.SYSTEM_ERR));
    if ((newOutStr != null) && (newOutStr.length() > 0))
    System.setOut(new PrintStream(new FileOutputStream(new File(newOutStr),true),true));
    }//End if
    if ((newErrStr != null) && (newErrStr.length() > 0))
    System.setErr(new PrintStream(new FileOutputStream(new File(newErrStr),true),true));
    }//End if
    }//End
    catch(Exception e)
    //restore the stuff
    System.setOut(this.sysOutOrig);
    System.setErr(this.sysErrOrig);
    }//End
    }//End
    //this is where the proxy functionalities will be embedded
    public void service(HttpServletRequest req,HttpServletResponse resp)
    throws ServletException,java.io.IOException
    //conenction URL
    URL target = null;
    //conenction to the remote object
    URLConnection targetConn = null;
    //stores the OOS and the OIS
    ObjectOutputStream oos = null;
    ObjectInputStream ois = null;
    try
    //check for the mode of operation
    if (proxySet)
    URLConnection objects go through two phases: first they are created, then they are connected.
    After being created, and before being connected, various options can be specified
    (e.g., doInput and UseCaches). After connecting, it is an error to try to set them.
    Operations that depend on being connected, like getContentLength, will implicitly perform the connection,
    if necessary.
    //for the URL to the proxy
    target=new URL(this.proxy);
    //conenct to the proxy
    targetConn = target.openConnection();
    //set the details of the connectuon
    targetConn.setDoInput(true);
    targetConn.setDoOutput(true);
    targetConn.setUseCaches(false);
    // If true, this URL is being examined in a context in which it makes sense to allow user interactions such as popping up an authentication dialog. If false, then no user interaction is allowed
    targetConn.setAllowUserInteraction(true);
    //connect to the remote object
    // targetConn.connect();//call this only when all the request properties are set
    System.out.println("ProxyServer:::>posting request");
    //post the received request to the URL
    this.postRequest(targetConn,req);
    System.out.println("ProxyServer:::>posted request successfully");
    System.out.println("ProxyServer:::>writing response");
    //receive the response
    //write the received response to the client
    this.writeResponse(targetConn,resp);
    System.out.println("ProxyServer:::>wrote response successfully");
    }//End if
    else
    //currently this functionality is not supported
    throw new ServletException(
    (String)(this.resBundle.getResource(ResKeys.ERR_FUNC_NOTSUPPORTED)));
    }//End
    }//End try
    catch(Exception e)
    if(e instanceof ServletException)
    throw (ServletException)e;
    }//End
    if (e instanceof IOException)
    throw (IOException)e;
    }//End
    //wrap it up in ServletException
    throw new ServletException(e);
    }//End
    }//End
    //method to write the response back to the client
    private void writeResponse(URLConnection targetConn,HttpServletResponse resp)
    throws ServletException
    //get all the header fields from the response connection and set them to the
    //response of the servlet
    Map headerFields = null;
    Iterator headerFieldEntries = null;
    Map.Entry header = null;
    //stores the input stream to the conn
    BufferedReader brConn = null;
    //stores the writer to the response
    PrintWriter prResp = null;
    //checks if the proxy authentication needed or not
    boolean proxyAuthReqd = false;
    try
    //juste ensuring that the proxy authentication is reset
    proxyAuthReqd = false;
    if( (targetConn != null) && (resp != null) )
    //Returns an unmodifiable Map of the header fields.
    //The Map keys are Strings that represent the response-header field names.
    //Each Map value is an unmodifiable List of Strings that represents the corresponding
    //field values
    headerFields = targetConn.getHeaderFields();
    //Returns a set view of the mappings contained in this map
    Set temp = headerFields.entrySet();
    //Returns an iterator over the elements in this set
    headerFieldEntries = temp.iterator();
    if (headerFieldEntries != null)
    while (headerFieldEntries.hasNext())
    Object tempHeader = headerFieldEntries.next();
    if (tempHeader instanceof Map.Entry)
    header = (Map.Entry)tempHeader;
    Object headerName = header.getKey();
    Object headerValue=header.getValue();
    System.out.println("ProxyServer:::>writeResponse-->headerName = "+headerName+" : headerValue = "+headerValue);
    //do not select the key-value pair if both the key adn the value are null
    if ( ( headerName == null) && (headerValue == null) )
    continue;
    }//Enmd
    if (headerValue != null)
    List headerValList = null;
    if (headerValue instanceof List)
    headerValList = (List)headerValue;
    }//End
    if(headerValList != null)
    for (int i=0;i<headerValList.size();i++)
    Object headerValueStr = headerValList.get(i);
    if (headerValueStr instanceof String)
    //note that the header-key can not be null for addHeader
    //I have made this temporary provision to make the programme work.
    resp.addHeader(( (headerName==null)? ("null_header"+i) :(String)headerName),
    (String)headerValueStr);
    //check if the proxy authentication required or not
    if (((String)headerValueStr).
    indexOf(resp.SC_PROXY_AUTHENTICATION_REQUIRED+"") != -1)
    System.out.println("ProxyServer:::>writeResponse-->proxy auth needed");
    //proxy authentication is needed
    proxyAuthReqd = true;
    }//End
    }//Ednd of
    else if (headerValueStr == null)
    resp.addHeader(( (headerName==null)? null :(String)headerName),
    null);
    }//End
    }//End for
    }//End if
    }//End if
    }//End
    }//End while
    }//End if
    //get the writer to the client
    prResp = resp.getWriter();
    System.out.println("ProxyServer:::>writeResponse-->proxyAuthReqd="+proxyAuthReqd);
    //juste test a simple header
    System.out.println("Proxy-Authenticate = "+(resp.containsHeader("Proxy-Authenticate")));
    //if the proxy asks you for authentication,pass on the same to the client
    //from whom you have received the request.When this flag is true,the connection
    //is closed by the remotehost adn hence any attempt to open in input steram
    //results in an error ie IOException
    if (!proxyAuthReqd)
    //now get the content adn write it to the response too
    brConn = new BufferedReader(new InputStreamReader(
    targetConn.getInputStream()));
    String tempStr = null;
    while ((tempStr = brConn.readLine())!=null)
    prResp.println(tempStr);
    }//End while
    //close the connections
    brConn.close();
    }//End if
    else
    prResp.println("Proxy Authentication needed...");
    }//End
    //close the streams
    prResp.flush();
    prResp.close();
    }//End if
    System.out.println("ProxyServer:::>writeResponse exiting\n");
    }//End try
    catch(Exception e)
    throw new ServletException(e);
    }//End
    }//End
    //method to post request to the internet
    private void postRequest(URLConnection targetConn,HttpServletRequest req)
    throws ServletException
    //extract the header parameters and the body content from the incoming request
    //and set them to the new connection
    Enumeration reqHeaders = null;
    //reads the incoming request's content
    BufferedReader brReqRd = null;
    PrintWriter prResWt = null;
    //stores temp header names and values
    String headerName = null;
    String headerValue = null;
    try
    if( (targetConn != null) && (req != null) )
    reqHeaders = req.getHeaderNames();
    //extract a header adn set it to the new connection
    while (reqHeaders.hasMoreElements())
    headerName = (String)(reqHeaders.nextElement());
    headerValue = req.getHeader(headerName);
    targetConn.setRequestProperty(headerName,headerValue);
    System.out.println("ProxyServer:::>headerValue::> headerName = "+headerName+" : headerValue="+headerValue);
    }//End
    System.out.println("ProxyServer:::>postRequest\n");
    //establis the actual connection
    //calling this method bfore the above loop results in IllegalStateException
    targetConn.connect();
    //NOTE : try reading from and writing into OIS and OOS respectively
    //now read the contents and write them to the connection
    // brReqRd = req.getReader(); //this hangs for some reason
    brReqRd = new BufferedReader(new InputStreamReader(req.getInputStream()));
    System.out.println("Got the reader..brReqRd = "+brReqRd);
    if (brReqRd != null)
    String temp = null;
    //establish the printwriter
    // prResWt = new PrintWriter(targetConn.getOutputStream(),true);
    prResWt = new PrintWriter(targetConn.getOutputStream());
    System.out.println("trying to read in a loop from brReqRd.. ready="+(brReqRd.ready()));
    while( (brReqRd.ready()) && ((temp=brReqRd.readLine()) != null) )
    System.out.println("In while::>temp = "+temp);
    prResWt.println(temp);
    }//Emd while
    //close the streams adn go back
    brReqRd.close();
    prResWt.flush();
    prResWt.close();
    }//End
    }//End outer if
    System.out.println("ProxyServer:::>postRequest exiting\n");
    }//End try
    catch(Exception e)
    throw new ServletException(e);
    }//End
    }//End
    }//End

    Hi serlank ,
    Thanks for your reply. Well , I initially I thought of not pasting the code,as it was too long. But I could not help it,as I thought I must show in code what I exactly meant. That's why I followed a description of my problem with the code. You could probably have copied the code and pasted it in one of your favourite editors to take a look at it. Did you,by any chance, try to read it on the browser? And as regards reposting the same message, I can say that I did it as I felt the subject was not quite appropriate in the first posting and I was not sure as to how I could delete/alter the posting. I am not asking for a code-fix,but some suggestions from some one who might ever have come across such a thing.Anyway, lemme know if you have any idea on it. Thanks...

  • Two new problems with the Quicktime Plug-in

    I recently discovered two new problems with the current Quicktime Plug-in for Mac OS X.
    First, the Quicktime Plug-in is unable to stream Quicktime media in any internet browsers other than Safari.
    There is just nothing on the spot where the embedded Quicktime player should be.
    Second, the Quicktime Plug-in only shows the message "The operation couldn't be completed. This file is not a movie file (-2048)"
    everytime it should work together with the Flip4Mac Plug-in. The thing is, when facing a webpage where a wmv or wma file is
    embedded, there only shows that error message on the spot where the player should exist. I first thought that it would be a
    problem with Flip4Mac. So I uploaded about this problem on telestream.net, only to hear that the error message above belongs
    to the Quicktime Plug-in.
    Both of these problems did not happen at all only three weeks ago. The embedded Quicktime player showed up without any problem
    in my Firefox and Opera, and wmv or wma files were streamed successfully through the Flip4Mac and Quicktime Plug-ins.
    Then, suddenly, after some point, these two problems began to occur, and there is no information on how to solve them on the web.
    I obviously tried uninstalling and reinstalling Quicktime. I even completely erased the hard disk of my Macbook, and reinstalled the
    whole Mac OS X. But the problems still remained. I borrowed another Macbook from my friend to check whether these problems
    occur in other computers, and they did occur in my friend's Macbook as well. So they are definitely not the matter of my own Macbook only.
    I think these might be the problems with the new Quicktime Plug-in 7.7.1.
    Please check about these problems and solve them on the next version of the Quicktime Plug-in.
    I will give you a couple of hyperlinks so that you can check about the problems directly.
    http://blog.naver.com/dbswhddlf1?Redirect=Log&logNo=130025903581
    ↑ This link is for the first problem (the embedded Quicktime player not showing up in any browsers other than Safari)
    http://blog.daum.net/wellabc/15434322
    ↑ This link is for the second problem (the error message showing up on the spot where a wmv or wma file should be streamed)
    p.s: I am sorry that I am Korean.

    I recommend that you repeat all this via
    http://www.apple.com/feedback/quicktime.html
    to make sure that Apple will see it.

  • Remote Resources: "A problem with the system proxy caused the connection to fail: End of file"

    Hi, I am trying to use "Remote Resources" on the current version of the Microsoft Remote Desktop for Android app, I can input the webfeed and it even shows the apps that I have configured on the server for "Remote App", sadly whenever
    I try to load any of the RemoteApps, I receive an error stating " A problem with the system proxy caused the connection to fail. End of File".
    I don't know what I can do to fix this, I've tried many things to no avail, also, normal Remote Desktop connections from the Microsoft Android app work flawlessly to the server.
    The relevant log is the following:
    [2014-Jan-09 04:40:54] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
    [2014-Jan-09 04:40:54] RDP (0): Final rdp configuration used: memory bookmark [
    label 
    hostname DIAZSERVER
    port 3389
    loadbalanceinfo 
    ui.swapmousebutton false
    remote.program ||ZWaveUtil
    remote.workingdirectory 
    remote.name ZWave Adapter Utility
    remote.args 
    rail true
    soundmode 0
    connect_to_console false
    redirectsdcard true
    performance_flags 134
    arc.sessionid 0
    anonymous_username 
    authentication_level 2
    use_redirection_server_name false
    username administrator
    gateway [
      host = DIAZSERVER
      port = 443
      bypass = false
    connect info[
      hostnames = [localhost]
      gatewayHost = DIAZSERVER
      gatewayPort = 443
      routingToken = Cookie: mstshash=administrator
      redirectionGUID = 
      proxyHost = 200.5.68.10
      proxyPort = 8080
      sessionId = -1
    [2014-Jan-09 04:40:54] RDP (0): Using HttpConnect proxy at 200.5.68.10:8080
    [2014-Jan-09 04:40:54] RDP (0): Using Basic Authentication with username ''
    [2014-Jan-09 04:40:54] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    AsioEndpointContext (0): startup(): starting up down context
    [2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
    [2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
    ASIOSocketAdapter (9): readSomething error. message: End of file. instance: 0x5d39d5c0
    RpcOverHttp (9): Stream error in endpoint 0x5abbc170 : A problem with the system proxy caused the connection to fail: End of file
    [2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
    [2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
    [2014-Jan-09 04:40:55] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    ASIOSocketAdapter (9): handleRead(): exception: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
        User Message : Failed to read from channel: -1. instance: 0x5d39d5c0
    [2014-Jan-09 04:40:55] RDP (0): Disconnect initiated by client
    RpcOverHttp (9): Exception in endpoint 0x5abbc170 : Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
        User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
    [2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
        User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
    [2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
        User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
    AsioEndpointContext (0): shutdown(): shutting down context
    AsioEndpointContext (0): shutdown(): context shut down
    AsioEndpointContext (0): shutdown(): shutting down context
    AsioEndpointContext (0): shutdown(): context shut down
    [2014-Jan-09 04:40:57] RDP (0): ------ END ACTIVE CONNECTION ------

    My problem is that the "proxy" is the proxy set up by my 3G configuration so, I tried connecting to the remote resources through my work wifi and I get the following:
    [2014-Jan-14 16:58:13] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
    [2014-Jan-14 16:58:13] RDP (0): Final rdp configuration used: memory bookmark [
    label 
    hostname DIAZSERVER
    port 3389
    loadbalanceinfo 
    ui.swapmousebutton false
    remote.program ||chrome
    remote.workingdirectory 
    remote.name Google Chrome
    remote.args 
    rail true
    soundmode 0
    connect_to_console false
    redirectsdcard true
    performance_flags 134
    arc.sessionid 0
    anonymous_username 
    authentication_level 2
    use_redirection_server_name false
    username Administrator
    gateway [
      host = DIAZSERVER
      port = 443
      bypass = false
    connect info[
      hostnames = [localhost]
      gatewayHost = DIAZSERVER
      gatewayPort = 443
      routingToken = Cookie: mstshash=Administrator
      redirectionGUID = 
      proxyHost = 
      proxyPort = 0
      sessionId = -1
    [2014-Jan-14 16:58:13] RDP (0): Not using any proxy
    [2014-Jan-14 16:58:13] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    AsioEndpointContext (0): startup(): starting up down context
    ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d474090
    RpcOverHttp (9): Stream error in endpoint 0x5d46b678 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    [2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    [2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    [2014-Jan-14 16:58:17] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d445158
    RpcOverHttp (9): Stream error in endpoint 0x5d49fa30 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    [2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    [2014-Jan-14 16:58:17] RDP (0): Disconnect initiated by client
    [2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    AsioEndpointContext (0): shutdown(): shutting down context
    AsioEndpointContext (0): shutdown(): context shut down
    AsioEndpointContext (0): shutdown(): shutting down context
    AsioEndpointContext (0): shutdown(): context shut down
    [2014-Jan-14 16:58:17] RDP (0): ------ END ACTIVE CONNECTION ------
    Now, I know the host can be resolved because: if I connect to the same host but on a full remote desktop (as opposed to just RemoteApp on it) I have no trouble either through 3G OR through my work connection.
    Moreover, I also tried directly inputting the IP as opposed to the web address of my server, I get the same error, that is the Remote Resources tab is able to access the feed (because it shows the available RemoteApps) but when I click an app it says it can't
    find the Host, here's the log for the connection directly to the IP address/rdweb/feed/webfeed.aspx :
    [2014-Jan-14 17:09:27] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
    [2014-Jan-14 17:09:27] RDP (0): Final rdp configuration used: memory bookmark [
    label 
    hostname DIAZSERVER
    port 3389
    loadbalanceinfo 
    ui.swapmousebutton false
    remote.program ||chrome
    remote.workingdirectory 
    remote.name Google Chrome
    remote.args 
    rail true
    soundmode 0
    connect_to_console false
    redirectsdcard true
    performance_flags 134
    arc.sessionid 0
    anonymous_username 
    authentication_level 2
    use_redirection_server_name false
    username administrator
    gateway [
      host = DIAZSERVER
      port = 443
      bypass = false
    connect info[
      hostnames = [localhost]
      gatewayHost = DIAZSERVER
      gatewayPort = 443
      routingToken = Cookie: mstshash=administrator
      redirectionGUID = 
      proxyHost = 
      proxyPort = 0
      sessionId = -1
    [2014-Jan-14 17:09:27] RDP (0): Not using any proxy
    [2014-Jan-14 17:09:27] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    AsioEndpointContext (0): startup(): starting up down context
    ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d372f28
    RpcOverHttp (9): Stream error in endpoint 0x5dd6b168 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    [2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    [2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    [2014-Jan-14 17:09:31] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d378de0
    RpcOverHttp (9): Stream error in endpoint 0x5e9cc1f0 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    [2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    [2014-Jan-14 17:09:31] RDP (0): Disconnect initiated by client
    [2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    AsioEndpointContext (0): shutdown(): shutting down context
    AsioEndpointContext (0): shutdown(): context shut down
    AsioEndpointContext (0): shutdown(): shutting down context
    AsioEndpointContext (0): shutdown(): context shut down
    [2014-Jan-14 17:09:31] RDP (0): ------ END ACTIVE CONNECTION ------
    I'm really puzzled here, I've tried checking if ports where open, and ports 443 and 3389 are wide open, I don't know what else it could be.

  • Here's My Problem With the Podcasts App

    So, here's my problem with the Podcasts app on my iPhone 5 - it relies too heavily on streaming and not enough on downloading and syncing. For most of my 8 hrs at work each day I am out of contact with my wireless carrier. And the hospitals IT dept has chosen to block whatever port the Podcasts app uses to stream content. So nothing over Wi-Fi either.
    As a result, all podcasts must being fully downloaded and ready to listen to prior to leaving for work. Unfortunately, even after fiddling with various settings in the app, I can't seem to get content to stick in the app. There are plenty of Unplayed episodes, but when I'm ready to listen, they're not really there and must be re-downloaded or streamed.
    Here's what I am going to try:
    • iTunes will continue do all of the downloading and syncing of podcasts to my iPhone
    • In each Podcast on the iPhone I have Subscribe "ON" and Auto-Download "OFF"
    I'm going to try this setup for a few days and see if it resolves my issue. Would appreciate any other observations and suggestions you might have. Cheers!

    Simple really:
    Delete the Podcasts app from your iPhone.
    Restart your iPhone.
    Continue managing your podcasts from iTunes, like you did under iOS 5.
    After restarting your phone, Podcasts will play via the Music app on your phone again.

  • What's the problem with the .f4m file?

    f4m file content(not work):
    http://localhost:10009/UploadFiles/Video/Video/20128/201208141534459942.f4m
    <?xml version="1.0" encoding="UTF-8"?>
    <manifest xmlns="http://ns.adobe.com/f4m/1.0">
      <id>Dynamic Streaming</id>
      <duration>59</duration>
      <mimeType>video/x-flv</mimeType>
      <mediaType>recorded</mediaType>
      <baseURL>rtmp://testserver/vod</baseURL>
      <media url="Video/Video/20128/201208141534459942_480x320_15fps_360kbps_flv" bitrate="360" width="480" height="320"  />
      <media url="Video/Video/20128/201208141534459942_640x480_15fps_768kbps_flv" bitrate="768" width="640" height="480"  />
      <media url="Video/Video/20128/201208141534459942_1280x720_15fps_1500kbps_flv" bitrate="1500" width="1280" height="720" />
    </manifest>
    The invidual file(work):
    rtmp://testserver/vod/Video/Video/20128/201208141534459942_480x320_15fps_360kbps_flv
    The invidual file's extension is ".flv",  what need i to modify to make the f4m file worked?

    In addition to the previous answers, the problem with the Seagate HD's involved in the recall is that they have a very high failure rate, to the extent that Apple expanded the recall to cover more computers than it initially did. For example, a user on Macintouch (another online Mac support community that is well worth checking out) reported that his company bought 40 iMacs and 25 of them needed their 1TB Seagate drives replaced.
    So if you can, get somebody with access to your computer to backup its HD as soon as possible if you don't already have a full backup.

  • IPhoto 11 Upgrade-"There is a problem with the subscription"

    I am running iPhoto 09 right now & I'm trying to update to 11 so that I can use 'Photo Stream", plus the benefits of iPhoto 11 of course. When I go to update I get to the subscribe button & I get the above messege: "There is a problem with the subscription" followed by "Request to the server macappstore://itunes.apple.com failed." Now I'm stuck on how to upgrade from iPhoto 09 to 11 ?? Any suggestions? Should I call Apple??
      Thanks...  

    Follow the procedure on the page linked below to repair the database, and if that doesn't work, to rebuild it:
    Rebuilding the iPhoto library
    If you still have the problem after doing that, use the procedure on the page linked below to find and remove the invalid items:
    Connection Failed, Server Does Not Exist

  • Hello. I have a problem with the iphone. I had the misfortune of Smader it for a half years ago. but now all my pictures away. and I think it is a security various measures. what should I do?

    hello. I have a problem with the iphone. I had the misfortune of Smader it for a half years ago. but now all my pictures away. and I think it is a security various measures. what should I do?

    ckuan wrote:
    iCloud pushes all your photos to the My Photo Stream album on your devices and computers, and manages them efficiently, so you don’t run out of storage space.
    Your iOS devices keep a rolling collection of your last 1000 photos in the My Photo Stream album. From there, you can browse your recent photos or move the ones you like to your Camera Roll or another album to keep them on your device forever.
    (Here's that part I'm bolding for you to reference): Because your Mac and PC have more storage than your iOS devices, you can choose to have all of your My Photo Stream photos automatically downloaded. In iPhoto or Aperture preferences on your Mac, select Photos (or Photo Stream) > My Photo Stream > Automatic Import. All of your photo stream photos will be imported into your Events, Projects, Photos, Faces, and Places folders in iPhoto or Aperture. On your PC with My Photo Stream enabled in the Control Panel, all of your photos will be imported into C:\\Users\<user name>\Pictures\iCloud Photos\My Photo Stream. For iCloud Control Panel 2.0 to 2.1.2 users, the path isC:\\Users\<user name>\Pictures\Photo Stream\My Photo Stream .
    Exactly.  It keeps a collection of the most recent 1000 photos in your Photostream Album on your iOS device.  That's the limit of the displayed images on an iOS device.  Not the upper limit of storage.  It's like the call history.  You can have more than 100 calls, but only the most recent 100 calls show on the device. You can still get your entire call history from your wireless carrier.  And you can still download all of your Photostream photos from Photostream using iCloud Control panel on a PC, or the iCloud option in System Preferences on a Mac.
    iCloud: My Photo Stream and iCloud Photo Sharing limits
    http://support.apple.com/kb/HT4858
    http://help.apple.com/icloud/#/mmc0cd7e99
    My Photo Stream upload limits
    The My Photo Stream limits below are established based on anticipated upload patterns. Currently, My Photo Stream upload limits are as follows:
    Uploads to My Photo Stream per hour: 1000 photos
    Uploads to My Photo Stream per day: 10,000 photos
    Uploads to My Photo Stream per month: 25,000 photos
    If you exceed one of these limits, your uploads to My Photo Stream will be paused temporarily and you may see a notification message on your device. Your uploads will resume automatically after you no longer exceed one of the limits, such as in the following hour or on the following day.
    You can upload 10,000 photos in a single DAY.

  • I just order 8 calendars from iPhoto and they came to me fine. Now I need to order two more but when I go thru the process I get a message  saying:unable to assemble calendar. There is a probleme with the photo with the file name"(Null)"   more........ .

    Would someone be able to explain to me the following issue with Iphoto?
    I ordered 8 same calendars for my soccer team and received them fine. Although a couple of pictures on it are a little off (out of focus). I need to order two more of the same calendars but when I go thru the process ireceive an error message saying:
    "Unable to to assemble  calendar" There is a problem with the photo with the file name "(Null)" The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your calendar.
    How can  I fine this "corrupt" photo? How did it go thru with the first batch of calendars but won't go thru now?
    Thank you for your help.   

    Apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Since only one option can be run at a time start
    with Option #4 and then #1 as needed.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • I can not upgrade to quicktime 7.7.3 for windows vista.  Error message says there is a problem with the program installer.  Any clue as to how to get around this.

    I can not download quicktime 7.7.3 for windows vista.  The error message says that there is a problem with the windows installer.  Any clues?

    The error message says that there is a problem with the windows installer.
    What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.)

  • I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

    I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

    Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

  • Is anyone having a problem with the new iPad (Gen. 3) not staying connected to the charger? It seems to ALWAYS get jiggled loose and no longer be charging. My iPad 1 has no issue but I can't browse Internet w/o new iPad unplugging. Horrible!

    I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
    I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged. 
    I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
    The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
    If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!

    Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
    Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
    Thanks again!

  • Having Problems With The Neo2 ? Read This!!!!

    Hi,
    i just bought a neo2 motherboard, with a p4 2,6 HT and 512 mb Kingston hyper ram ( 2 peaces of 256, else it won't use the dual bandwith :D)
    In the beginning everything seemed fine, until i got some sudden reboots and other vague stuff. I read it could be the SB audigy messing things up. I removed the card and windows Xp pro runs fine now. no more sudden reboots or explorer not resonding crashes.
    But, i still had problems with games crashing. I got reboots. After i set the "automatic reboot after crash" to false, i got blue screens or lock-ups in my games.
    I wondered what it could be. Then i started to put my videocard ( a radeon 9700 pro 128 mb) in agp 4x mode instead of agp 8x! Now my games run without crashes, but benchmarks are not that high. 4780 marks with 3dmark 2003.
    I think i will send msi and Ati a mail concerning this problem. I don't know if it is PSU related. Maybe the videocard demands a little more power in agp 8x mode.
    Well, having probs with you're NEO2 ??
    remove the sb Audigy and turn the agp back to 4 using smartgart ( it's located in you're display settings screen ).
    First i tought it was a PSU related problem, because i swapped my 350 Watt enermax with a Q-tec 400 watt psu. The 400 watt PSU died while i was gaming. Maybe the enermax is the better PSU :D So, it could still be a PSU related problem. Maybe the agp 8x settings demands a lot more from you're psu. Anyway, i'll receive a 550 watt Antec PSU soon, so i can check this out....
    Btw. I cant run the motherboard in anything better than "slow" mode. In all other modes Xp won't boot. I haven't tryed it since the AGP is at 4X, but i don't think it will matter.
    Regards,
    Welcome to the real world NEO :D

    Ok.....
    i raised the memory voltage setting in the bios from 2.65 to 2.8 and the agp voltage from 1.5 to 1.7
    Everything seems fine, but games crash back to the desktop now without an error message or the either lockup.
    Whatever i do, i can't make the mobo crash in anything but games!
    Btw. the following message caught my attention, when i ran f1 2002 with directx 8.1. Since i have directx 9, i haven't seen it anymore. Maybe because the ati-drivers are made for directx 9....
    // Watchdog Event Log File
    LogType: Watchdog
    Created: 2003-10-04 02:02:53
    TimeZone: -60 - West-Europa (standaardtijd)
    WindowsVersion: XP
    EventType: 0xEA - Thread Stuck in Device Driver
    // The driver for the display device got stuck in an infinite loop. This
    // usually indicates a problem with the device itself or with the device
    // driver programming the hardware incorrectly. Please check with your
    // display device vendor for any driver updates.
    ShutdownCount: 9
    Shutdown: 0
    EaRecovery: 1
    EventCount: 2
    BreakCount: 2
    BugcheckTriggered: 1
    DebuggerNotPresent: 1
    DriverName: ati2dvag
    EventFlag: 1
    DeviceClass: Display
    DeviceDescription: RADEON 9700 PRO
    HardwareID: PCI\VEN_1002&DEV_4E44&SUBSYS_00021002&REV_00
    Manufacturer: ATI Technologies Inc.
    DriverFixedFileInfo: FEEF04BD 00010000 0006000E 000A18EA 0006000E 000A18EA 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
    DriverCompanyName: ATI Technologies Inc.
    DriverFileDescription: ATI Radeon WindowsNT Display Driver
    DriverFileVersion: 6.14.10.6378
    DriverInternalName: ati2dvag.dll
    DriverLegalCopyright: Copyright (C) 1998-2002 ATI Technologies Inc.
    DriverOriginalFilename: ati2dvag.dll
    DriverProductName: ATI Radeon Family
    DriverProductVersion: 5.2.3790.2
    I wish i had another videocard to test. My radeon 9700 pro is getting suspicious...
    Regards,
    The real world

Maybe you are looking for

  • Problems with migration to FB 4.5

    I had been working with FB4 premium and just purchased FB4.5 premium with Flash cs5.5. I am having a BIG problem importing my old projects from FB4.  AKA: "VerifyError: Error #1053: Illegal override of createGeometry in flashx.textLayout.elements.Flo

  • ComboBox XML Data Provider

    Hello all, I'm having trouble creating an XML data provider to use for a ComboBox. Below is what I've done: XML data I get from Rails server: <states> <state name="Arizona" id="1" /> </states> CDATA: import mx.rpc.events.ResultEvent; import mx.collec

  • Will this hurt my HDD ?

    Greetings, Long time follower, 1st time poster here. So, I'm working from home and part of that work is to continuously download large files to my HDD, process the data, upload the processed files, then deleting files from my HDD. My question is: wil

  • My imovie will not install

    I recently had to erase all of the data off my hard drive and re-download osx mountain lion. I tried to re-download imovie but it won't let me! it keeps saying an error has occured, please help!

  • Struts ? - (Urgent)

    The code in Action boolean war= false;         if ( CD.after(AD) ){           war= true;           msgAgreement="val";         req.setAttribute("war",""+war);Code in Struts Config file <action path="/tell/Act"             type="com.user.action.Sample