Problem with timeout exception on a block step
Hi there, i have a BPM with a block step that has a 1 minute duration timeout, when i see the steps on the sxmb_moni_bpe the block deadline is being reached after 2:50 more or less, on the block i have an infinite loop with a receive step, does anybody knows why is taking more than expected?, how can i fix it?, thanks for all the help on the matter,
Regards,
Robert.
Hi ,
This may be due to some missed runtime environment parameters.
Go to trans - SWU3
In Maintain Runtime Environment
Execute the following activities :-
1. Schedule background job for missed deadline
2. Schedule background job for deadline Monitoring
Also have a look at sap note 1117735, if you are not able to execute the above activities.
Regards,
Sunil Chandra
Edited by: sunil chandra on Sep 29, 2009 8:18 PM
Similar Messages
-
Problem with passing exception with declarative security
I am having a problem with passing exceptions with message security bunding enables. I have a JAXWS EJB 3.0 web service, The service defines methods which throw exceptions. The exceptions are passed correclty when there is no message security enabled. once the security is enabled and an exception is thrown, I get the stack trace below. Furthermore, the service with security enabled works fine as long as methods do not throw an exception. I am thinking that the JAXWS generated wrapped exception is not correctly handled by the message security provider in the server. Just a thought. Any help would be greatly appreciated.
Stack trace:
[#|2007-03-23T00:49:06.333-0600|WARNING|sun-appserver-pe9.0|javax.enterprise.sys
tem.stream.err|_ThreadID=11;_ThreadName=httpWorkerThread-8080-0;_RequestID=64417
ac0-ded8-474d-9066-5a97c8559b67;|
ERROR: 'NAMESPACE_ERR: An attempt is made to create or change an object in a wa
y which is incorrect with regard to namespaces.'|#]
[#|2007-03-23T00:49:06.334-0600|SEVERE|sun-appserver-pe9.0|javax.xml.messaging.s
aaj.soap|_ThreadID=11;_ThreadName=httpWorkerThread-8080-0;_RequestID=64417ac0-de
d8-474d-9066-5a97c8559b67;|SAAJ0511: Unable to create envelope from given source
|#]
[#|2007-03-23T00:49:06.334-0600|INFO|sun-appserver-pe9.0|javax.enterprise.system
.core.security|_ThreadID=11;_ThreadName=httpWorkerThread-8080-0;|SEC2003: Contai
ner-auth: wss: Error securing response
com.sun.enterprise.security.jauth.AuthException: Unable to create envelope from
given source:
at com.sun.xml.wss.provider.ServerSecurityAuthModule.secureResponse(Serv
erSecurityAuthModule.java:129)
at sun.reflect.GeneratedMethodAccessor237.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.enterprise.security.jauth.AuthContext.invokePriv(AuthContext.
java:128)
at com.sun.enterprise.security.jauth.AuthContext$1.run(AuthContext.java:
78)
at java.security.AccessController.doPrivileged(Native Method)
at com.sun.enterprise.security.jauth.AuthContext.invoke(AuthContext.java
:75)
at com.sun.enterprise.security.jauth.ConfigFile$ConfigServer.secureRespo
nse(ConfigFile.java:662)
at com.sun.enterprise.security.wss.WebServiceSecurity.secureResponse(Web
ServiceSecurity.java:220)
at com.sun.enterprise.security.wss.WebServiceSecurity.secureResponse(Web
ServiceSecurity.java:197)
at com.sun.enterprise.webservice.JAXWSSystemHandlerDelegateFactory$Servl
etDelegate.processResponse(JAXWSSystemHandlerDelegateFactory.java:540)
at com.sun.enterprise.webservice.monitoring.JAXWSEndpointImpl.processRes
ponse(JAXWSEndpointImpl.java:121)
at com.sun.xml.ws.protocol.soap.server.SOAPMessageDispatcher.receive(SOA
PMessageDispatcher.java:148)
at com.sun.xml.ws.server.Tie.handle(Tie.java:88)
at com.sun.enterprise.webservice.Ejb3MessageDispatcher.handlePost(Ejb3Me
ssageDispatcher.java:160)
at com.sun.enterprise.webservice.Ejb3MessageDispatcher.invoke(Ejb3Messag
eDispatcher.java:89)
at com.sun.enterprise.webservice.EjbWebServiceServlet.dispatchToEjbEndpo
int(EjbWebServiceServlet.java:178)
at com.sun.enterprise.webservice.EjbWebServiceServlet.service(EjbWebServ
iceServlet.java:109)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sun.enterprise.web.AdHocContextValve.invoke(AdHocContextValve.jav
a:100)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.j
ava:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:536)
at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:71)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.j
ava:182)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.j
ava:566)
at com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipe
line.java:120)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineVal
ve.java:137)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.j
ava:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:536)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:23
1)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(
ProcessorTask.java:667)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBloc
ked(ProcessorTask.java:574)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(Proces
sorTask.java:844)
at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTas
k(ReadTask.java:287)
at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.jav
a:212)
at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:2
52)
at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThrea
d.java:75)
|#]
[#|2007-03-23T00:49:06.335-0600|WARNING|sun-appserver-pe9.0|javax.enterprise.sys
tem.core|_ThreadID=11;_ThreadName=httpWorkerThread-8080-0;_RequestID=64417ac0-de
d8-474d-9066-5a97c8559b67;|Exception while tracing response : Unable to create e
nvelope from given source: |#]
[#|2007-03-23T00:49:06.336-0600|WARNING|sun-appserver-pe9.0|javax.enterprise.sys
tem.stream.err|_ThreadID=11;_ThreadName=httpWorkerThread-8080-0;_RequestID=64417
ac0-ded8-474d-9066-5a97c8559b67;|
com.sun.enterprise.security.jauth.AuthException: Unable to create envelope from
given source:
at com.sun.xml.wss.provider.ServerSecurityAuthModule.secureResponse(Serv
erSecurityAuthModule.java:129)
at sun.reflect.GeneratedMethodAccessor237.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.enterprise.security.jauth.AuthContext.invokePriv(AuthContext.
java:128)
at com.sun.enterprise.security.jauth.AuthContext$1.run(AuthContext.java:
78)
at java.security.AccessController.doPrivileged(Native Method)
at com.sun.enterprise.security.jauth.AuthContext.invoke(AuthContext.java
:75)
at com.sun.enterprise.security.jauth.ConfigFile$ConfigServer.secureRespo
nse(ConfigFile.java:662)
at com.sun.enterprise.security.wss.WebServiceSecurity.secureResponse(Web
ServiceSecurity.java:220)
at com.sun.enterprise.security.wss.WebServiceSecurity.secureResponse(Web
ServiceSecurity.java:197)
at com.sun.enterprise.webservice.JAXWSSystemHandlerDelegateFactory$Servl
etDelegate.processResponse(JAXWSSystemHandlerDelegateFactory.java:540)
at com.sun.enterprise.webservice.monitoring.JAXWSEndpointImpl.processRes
ponse(JAXWSEndpointImpl.java:121)
at com.sun.xml.ws.protocol.soap.server.SOAPMessageDispatcher.receive(SOA
PMessageDispatcher.java:148)
at com.sun.xml.ws.server.Tie.handle(Tie.java:88)
at com.sun.enterprise.webservice.Ejb3MessageDispatcher.handlePost(Ejb3Me
ssageDispatcher.java:160)
at com.sun.enterprise.webservice.Ejb3MessageDispatcher.invoke(Ejb3Messag
eDispatcher.java:89)
at com.sun.enterprise.webservice.EjbWebServiceServlet.dispatchToEjbEndpo
int(EjbWebServiceServlet.java:178)
at com.sun.enterprise.webservice.EjbWebServiceServlet.service(EjbWebServ
iceServlet.java:109)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sun.enterprise.web.AdHocContextValve.invoke(AdHocContextValve.jav
a:100)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.j
ava:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:536)
at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:71)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.j
ava:182)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.j
ava:566)
at com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipe
line.java:120)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineVal
ve.java:137)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.j
ava:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:536)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:23
1)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(
ProcessorTask.java:667)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBloc
ked(ProcessorTask.java:574)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(Proces
sorTask.java:844)
at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTas
k(ReadTask.java:287)
at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.jav
a:212)
at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:2
52)
at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThrea
d.java:75)
|#]
[#|2007-03-23T00:49:06.336-0600|SEVERE|sun-appserver-pe9.0|javax.enterprise.reso
urce.webservices.jaxws.server.soapmd|_ThreadID=11;_ThreadName=httpWorkerThread-8
080-0;_RequestID=64417ac0-ded8-474d-9066-5a97c8559b67;|Unable to create envelope
from given source:
com.sun.enterprise.security.jauth.AuthException: Unable to create envelope from
given source:
at com.sun.xml.wss.provider.ServerSecurityAuthModule.secureResponse(Serv
erSecurityAuthModule.java:129)
at sun.reflect.GeneratedMethodAccessor237.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.enterprise.security.jauth.AuthContext.invokePriv(AuthContext.
java:128)
at com.sun.enterprise.security.jauth.AuthContext$1.run(AuthContext.java:
78)
at java.security.AccessController.doPrivileged(Native Method)
at com.sun.enterprise.security.jauth.AuthContext.invoke(AuthContext.java
:75)
at com.sun.enterprise.security.jauth.ConfigFile$ConfigServer.secureRespo
nse(ConfigFile.java:662)
at com.sun.enterprise.security.wss.WebServiceSecurity.secureResponse(Web
ServiceSecurity.java:220)
at com.sun.enterprise.security.wss.WebServiceSecurity.secureResponse(Web
ServiceSecurity.java:197)
at com.sun.enterprise.webservice.JAXWSSystemHandlerDelegateFactory$Servl
etDelegate.processResponse(JAXWSSystemHandlerDelegateFactory.java:540)
at com.sun.enterprise.webservice.monitoring.JAXWSEndpointImpl.processRes
ponse(JAXWSEndpointImpl.java:121)
at com.sun.xml.ws.protocol.soap.server.SOAPMessageDispatcher.receive(SOA
PMessageDispatcher.java:148)
at com.sun.xml.ws.server.Tie.handle(Tie.java:88)
at com.sun.enterprise.webservice.Ejb3MessageDispatcher.handlePost(Ejb3Me
ssageDispatcher.java:160)
at com.sun.enterprise.webservice.Ejb3MessageDispatcher.invoke(Ejb3Messag
eDispatcher.java:89)
at com.sun.enterprise.webservice.EjbWebServiceServlet.dispatchToEjbEndpo
int(EjbWebServiceServlet.java:178)
at com.sun.enterprise.webservice.EjbWebServiceServlet.service(EjbWebServ
iceServlet.java:109)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sun.enterprise.web.AdHocContextValve.invoke(AdHocContextValve.jav
a:100)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.j
ava:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:536)
at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:71)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.j
ava:182)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.j
ava:566)
at com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipe
line.java:120)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineVal
ve.java:137)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.j
ava:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:536)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:23
1)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(
ProcessorTask.java:667)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBloc
ked(ProcessorTask.java:574)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(Proces
sorTask.java:844)
at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTas
k(ReadTask.java:287)
at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.jav
a:212)
at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:2
52)
at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThrea
d.java:75)
|#]
[#|2007-03-23T00:49:06.338-0600|WARNING|sun-appserver-pe9.0|javax.enterprise.sys
tem.stream.err|_ThreadID=11;_ThreadName=httpWorkerThread-8080-0;_RequestID=64417
ac0-ded8-474d-9066-5a97c8559b67;|
com.sun.enterprise.security.jauth.AuthException: Unable to create envelope from
given source:
at com.sun.xml.wss.provider.ServerSecurityAuthModule.secureResponse(Serv
erSecurityAuthModule.java:129)
at sun.reflect.GeneratedMethodAccessor237.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.enterprise.security.jauth.AuthContext.invokePriv(AuthContext.
java:128)
at com.sun.enterprise.security.jauth.AuthContext$1.run(AuthContext.java:
78)
at java.security.AccessController.doPrivileged(Native Method)
at com.sun.enterprise.security.jauth.AuthContext.invoke(AuthContext.java
:75)
at com.sun.enterprise.security.jauth.ConfigFile$ConfigServer.secureRespo
nse(ConfigFile.java:662)
at com.sun.enterprise.security.wss.WebServiceSecurity.secureResponse(Web
ServiceSecurity.java:220)
at com.sun.enterprise.security.wss.WebServiceSecurity.secureResponse(Web
ServiceSecurity.java:197)
at com.sun.enterprise.webservice.JAXWSSystemHandlerDelegateFactory$Servl
etDelegate.processResponse(JAXWSSystemHandlerDelegateFactory.java:540)
at com.sun.enterprise.webservice.monitoring.JAXWSEndpointImpl.processRes
ponse(JAXWSEndpointImpl.java:121)
at com.sun.xml.ws.protocol.soap.server.SOAPMessageDispatcher.receive(SOA
PMessageDispatcher.java:148)
at com.sun.xml.ws.server.Tie.handle(Tie.java:88)
at com.sun.enterprise.webservice.Ejb3MessageDispatcher.handlePost(Ejb3Me
ssageDispatcher.java:160)
at com.sun.enterprise.webservice.Ejb3MessageDispatcher.invoke(Ejb3Messag
eDispatcher.java:89)
at com.sun.enterprise.webservice.EjbWebServiceServlet.dispatchToEjbEndpo
int(EjbWebServiceServlet.java:178)
at com.sun.enterprise.webservice.EjbWebServiceServlet.service(EjbWebServ
iceServlet.java:109)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sun.enterprise.web.AdHocContextValve.invoke(AdHocContextValve.jav
a:100)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.j
ava:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:536)
at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:71)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.j
ava:182)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.j
ava:566)
at com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipe
line.java:120)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineVal
ve.java:137)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.j
ava:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:536)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:23
1)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(
ProcessorTask.java:667)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBloc
ked(ProcessorTask.java:574)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(Proces
sorTask.java:844)
at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTas
k(ReadTask.java:287)
at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.jav
a:212)
at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:2
52)
at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThrea
d.java:75)
|#]Hi,
Thanks for the reply. I read the weblog and posted a reply to it already.
History:
I actually have a web service where I have message level security enabled and it works great. I had some issues early on with descriptor but those are worked out. As I was testing, I created a test case that throws an exception. That is when I get the NAMESPACE_ERROR, jauth exceptions , etc.
Attempt to find issue:
Glassfish: V1 (glassfish-installer-9.0-b48.jar), jdk1.5.0_11
Code: EJB tech tip EJB30 web service
Security: message security, specified almost verbatim to how it is done in the link you mention.
Sample works fine until I modify the web service to throw an exception. Once I do that, I get the NAMESPACE_ERROR stack trace I posted in original message. The sample in the tech tip uses the embedded app-client.
Thanks for helping with this. -
Problem with print output - gradient fade blocking
Hi, I am new to InDesign, working on first brochure using CS4.
Problem occurs with 2 photos and a fade - one photo on left, one photo on right, blank white space in between, I've laid a box over the edge of each pic (jpgs) and used a fade so the photos fade into the white, rather than having a flat straight line.
Problem is when I print a proof (PDF export, which is perfect on-screen) some of the boxes appear perfect, but some print as a solid box!
First time I exported as very lo-res, so re-tried at much higher resolution - this fixed the first page, but others still have the problem.
Tried it even higher res, but still some pages are perfect, and some are not. It seems to be very random.
I'm also getting this blocking problem with a drop shadow I've placed on basic white text - in the main area of page, and in the footnote.
Weird thing is that on several pages one box will be perfect, but 2 drop shadows won't be, but another drop shadow is fine!
I'm printing out a colour proof on a large format solvent-ink (Roland SolJet) printer, (which obviously isn't necessarily compatible, but it's the only colour printer we have with which to proof the brochure).
I'm hoping that it is simply an issue between the printer software (Roland Colour-Rip) and the file - is this likely?
Any help/advice is very much appreciated!Thanks Peter, I have tried this effect, but it appears very blocky, and leaves a noticeable hardline between the edge of the white space and the edge of the photo.
I've stuck with the overlaying box with gradient because it seems to be the only way to have a very smooth fade-out, with no hard edge. -
J2SE 1.3 client - Weblogic 8.14 Problem with unmarshal exception
Hi
I have problem with using RMI IIOP with J2SE 1.3.1_01 - Weblogic 8.1 SP4. Client is runing good, methods are working perfectly, but when EJB throws my exception, it is not serialized and thrown on client but MarshalException is thrown.
I did everything as it is in weblogic documentation and I really do not know what to do.
Also I read in weblogic documentation this note:
Limitations Using RMI-IIOP on the Client
Use WebLogic Server with JDK 1.3.1_01 or higher. Earlier versions are not RMI-IIOP compliant. Note the following about these earlier JDKs:
Do not correctly unmarshal unchecked exceptions.But I am using 1.3.1_01 ...
When I run it with 1.4 it is of course running without problem.
Martin
My Exception :
java.io.IOException:
at com.sun.corba.se.internal.io.IIOPInputStream.throwExceptionType(Native Method)
at com.sun.corba.se.internal.io.IIOPInputStream.simpleReadObject(IIOPInputStream.java:272)
at com.sun.corba.se.internal.io.ValueHandlerImpl.readValueInternal(ValueHandlerImpl.java:245)
at com.sun.corba.se.internal.io.ValueHandlerImpl.readValue(ValueHandlerImpl.java:207)
at com.sun.corba.se.internal.iiop.CDRInputStream.read_value(CDRInputStream.java:1059)
at com.upsscs.europe.cdmv.spl.ejb.service._SBTelnetKitting_Stub.getPickList(Unknown Source)
at Pokus.main(Pokus.java:59)
java.rmi.MarshalException: CORBA MARSHAL 0 No; nested exception is:
org.omg.CORBA.MARSHAL: Unable to read value from underlying bridge : minor code: 0 completed: No
org.omg.CORBA.MARSHAL: Unable to read value from underlying bridge : minor code: 0 completed: No
at com.sun.corba.se.internal.iiop.CDRInputStream.read_value(CDRInputStream.java:1065)
at com.upsscs.europe.cdmv.spl.ejb.service._SBTelnetKitting_Stub.getPickList(Unknown Source)
at Pokus.main(Pokus.java:59)
Exception in thread "main"Hi,
I am sending the supported configuration link
please go through it.
http://e-docs.bea.com/platform/suppconfigs/configs81/81_over/overview.html#1146550
Regards
Prasanna Yalam -
Problems with NO_DATA_FOUND Exception
Hi, I have experienced some problems with the NO_DATA_FOUND Exception. I have defined a cursor c. Then I have started a loop and a NO_DATA_FOUND Exception has rised. I handle this exception with un update clause but when the exception rises the loop does not continue anymore. What can I do in order to continue looping after the Exception rises???... I handle the NO-DATA_FOUND Exception in the Exception part of my code...
Thanks in advance.-
Alberto.-Thanks a lot Robert... I solved my problem by handling the exception within the loop as you told me. I attach the code if somebody has or had the same problem...
Best regards.-
Albert.-
procedure GenerarSolicitudCompra (id_proveedor IN c_rfqresponse.c_bpartner_id%TYPE) is
es_winner char(1);
id_rfq number(10);
cursor rfqs is select sqd.c_rfq_id from sqd_cotizaciones sqd;
begin
for r in rfqs loop
id_rfq := r.c_rfq_id;
begin
select cr.isselectedwinner into es_winner from c_rfqresponse cr
where cr.c_rfq_id = r.c_rfq_id
and cr.c_bpartner_id = id_proveedor;
exception
when NO_DATA_FOUND then
update sqd_cotizaciones sqd set sqd.win_rfqresponse = 'N'
where sqd.c_rfq_id = id_rfq and sqd.c_bpartner_id = id_proveedor;
commit;
end;
if es_winner = 'Y' then
-- actualizar sqd_cotizaciones.win_rfqresponse con 'Y'
update sqd_cotizaciones cot
set cot.win_rfqresponse = 'Y'
where cot.c_rfq_id = r.c_rfq_id
and cot.c_bpartner_id = id_proveedor;
commit;
else
-- actualizar sqd_cotizaciones.win_rfqresponse con 'N'
update sqd_cotizaciones cot
set cot.win_rfqresponse = 'N'
where cot.c_rfq_id = r.c_rfq_id
and cot.c_bpartner_id = id_proveedor;
commit;
end if;
end loop;
end GenerarSolicitudCompra; -
Problems with filter exception using Network IP range
We are using a spam filtering service for out incoming email. As such, all
our email is directed to our SMTP server from their IP address range. We
employ a dual firewal set up. We have a Netscreen firewall connected to the
Internet and the Border Manager 3.8 server sits between the Netscreen and
our internal network. On the BM server I have set up a generic proxy with a
proxy port of 1025 to proxy the incoming email to our internal mail server.
The Netscreen is set up to forward all SMTP (port 25) traffic to the
BorderManager server on port 1025. Using FiltCfg I also set up a packet
filter exception to allow traffice from the service providers network
(Network = 104.56.144.0, Mask = 255.255.248.0) to port 1025. With this
setup most email is received just fine. However I was getting reports of
bounced and delayed email. Working with our service provider it was
detemined that randomly some connections were failing. I used PktScan to
collect packet trace infomation from our BM server. On a regular basis
there are groups of SYN packets from the service providers email servers
which are not receiving a response from the BM server. In some cases the BM
server does eventuall respond with a SYN/ACK. There are also times when the
BM server responds immediately after the first SYN. All the incoming
connections from the service provider are currently comming in from two IP
addresses, 104.56.144.247 and 104.56.145.247. The BM server is showing the
same problem for both IP addresses, sometimes it responds immediatley to the
SYN, sometimes it takes a few SYN packets before it responds, and sometimes
the BM server never responds to the connection attempt. On a whim I added
filter exceptions which specifed the two host IP addresses specifically
(other than that the rules are identical to the one using the Network
specification). After doing this the BM server is now responing immediately
to all the incoming SMTP connection attempts from the service provider. Why
would I be seeing this problem with the filter exception defined with a
Network specification but not with Host specifications? Is there anything I
can do to fix this?
Thank you for any help provided,
Brad JohnsonYes. I created 8 separate 255.255.255.0 exceptions. In viewing the packet
trace data for the last couple of days it appears this resoloved the
problem.
Thanks
Brad Johnson
"Craig Johnson" <[email protected]> wrote in message
news:[email protected]..
> In article <XCo8l.13813$[email protected]>, Brad Johnson
> wrote:
>> Both servers are running NW 6.5 sp 6. After this problem started I
>> applied
>> BM38sp5_IR1, TCP681K, and wsock6o. This had no affect on the issue.
>>
>> If I create individual exceptions for the IP addresses I am currently
>> receiving mail from, rather than using the range of potential addresses,
>> the
>> problem goes away.
>>
> Well, it sounds definitive enough, but I think if it were a generic issue
> to
> the patch level I would have heard about it from my clients who use
> Postini
> mail filtering service. All of the Postini-related servers have a network
> address as a source in the filter exceptions for smtp.
>
> Instead of using a 255.255.248.0 mask, does it work if you set up 8
> different
> 255.255.255.0 exceptions?
>
>
> Craig Johnson
> Novell Support Connection SysOp
> *** For a current patch list, tips, handy files and books on
> BorderManager, go to http://www.craigjconsulting.com ***
>
> -
[solved] problems with timeouts and tcp retransmission
I've recently upgraded my archlinux and am having real problems with the network.
I have checked the configuation and all seems ok.
Everything like DNS/Gateways/IPs all seem to be setup (not changed anything from when it was working before)
I read about setting the MTU manually
ifconfig eth0 mtu 1492
I tried this but it doesn't seem to make any difference
Looking at the packetflow on wireshark it seems that there are a huge amount of TCP Dup ACK and TCP Retransmission when trying to POST
If I boot into windows everything is fine so unfortunately it seems that it might be something with linux
Everything in linux seemed to be working ok before I upgraded
Last edited by equilibrium (2009-12-05 15:13:14)seems that I am still unable to post from my arch system
$ dmesg | grep sky2
sky2 driver version 1.23
sky2 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
sky2 0000:02:00.0: setting latency timer to 64
sky2 0000:02:00.0: Yukon-2 EC chip revision 2
sky2 0000:02:00.0: irq 29 for MSI/MSI-X
sky2 eth0: addr xx:xx:xx:xx:xx:xx
sky2 eth0: enabling interface
sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:17:31:F4:ED:A2
inet addr:192.168.1.20 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1170 errors:0 dropped:0 overruns:0 frame:0
TX packets:1362 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1101154 (1.0 Mb) TX bytes:197742 (193.1 Kb)
Interrupt:19
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:4595 errors:0 dropped:0 overruns:0 frame:0
TX packets:4595 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:541498 (528.8 Kb) TX bytes:541498 (528.8 Kb)
/etc/rc.conf
eth0="eth0 192.168.1.20 netmask 255.255.255.0 broadcast 192.168.1.255"
INTERFACES=(eth0)
gateway="default gw 192.168.1.1"
ROUTES=(gateway) -
A problem with 3 exceptions from 1 method!!!
I don't like it and I need advice on how to avoid it. I have been given an interface and am required to use ech of its methods. Here is what happened...
The interface declares that when a record is searched for in the database and cant be found then a database exception must be thrown.
When a operation is performed on a record it gets locked with a lock cookie and this cookie must be the same when the lock is released at the end of the operation or a Security Exception gets thrown.
The file accessing itself throws IO exception which ofcourse has to be handled too.
So far I have done the following(data level). I have a general databaseException which is a parent to all database exceptions. This means my Security and RecNotFound exceptions can be caught by one exception as they bubble up the stack. My IOException gets converted to a runtime exception and will be converted back to a checked exception in the GUI layer where I cater for all exceptions (The user does not see them).
Moving on....
In my service layer layer I have a business Exception to all business logic errors. Here is why it gets tricky...
A record can not be booked if it is already booked. So I have a bookedRecException and the booking process involves locking the record(throws databaseException as mentioned). I also catch my RuntimeIOExceptions and throw them in my service layer up the stack as an IOException which gets handled in the GUI.
As you can see this does not look good and I want to fix it. I thaught of making my databaseException into a IOE my service interface methods are all throwing DatabaseException AND IOExceptions.
Edited by: Yucca on Apr 2, 2009 8:37 PMYucca wrote:
morgalr wrote:
So what you are saying is: you don't want to deal with all the different exceptions?
No what I am saying Is it's the SCJD and I am trying to avoid messy code with 3 exceptions. I am very much for custom exceptions where having a strongly typed exception tells you enough just by the fact that AlreadyBookedRecordException in your stack explains it all.That is not apparent from you post, what you seem to be saying is that you don't want them. In any case I've never found it messy to handle all exceptions individually, nor have I found it messy to use the method I mentioned. -
Strange problem with In-line If-Else block
Hi!
I've discovered a very strange problem with the following code:
enum Enum {
A, B, C
public static void main(String[] args) {
Enum e = Enum.C;
Object o = e == Enum.A ? 1 : e == Enum.B ? 2 : null; // Throws NullPointerException because of the null. Why???
}I'm using Java 6
Thanks in advance!Instead of guessing what the problem is, how about we go to [the source|http://java.sun.com/docs/books/jls/third_edition/html/expressions.html#15.25] and see what's actually happening.
Our line is
expr ? <int> : (expr ? <int> : <null>)Let's look at the inner conditional first. By JLS 5.1.8, we have two different types, neither of which is a reference type. The null is convertible to int, so we have two types convertible to numerics and we apply unboxing to the null, which is where your error is coming from.
Your fix works because Object is not convertible to int, so we fall through to the last case and use boxing on the ints instead of unboxing on the null.
Another way to fix this is to use Integers instead of ints. Since Integer is a reference type, we hit the third case and never try to unbox.
Object o = (e == A ? Integer.valueOf(1) : (e == B ? Integer.valueOf(2) : null)) -
Problem with RFC exception in BPM
Hi,'
I have created control step for RFC exception. Assigned the alert catagory and given alert message.
i have below steps:
Transformation-control-send RFC-cancel process.
while trying to test i changed ip address of rfc channel and tested but i am not receiving any alert but messages are getting stucked in BPM with error -
permanent error in message proccessing
could you please suggest how to trigger rfc execptionSuggestions..
refer BPMPatternReqRespTimeout for triggering exception.
Basically you might change the sequence of steps as follow
Create Block with deadline branch where you use control step to trigger exception and have another branch exception handler and in that branch you have transformation and senderror. This will help. -
Problem with copying and pasting text blocks in Fireworks CS5
Until recently when I copied and pasted a text block in Fireworks CS5, the block would retain all formatting applied to the copied text block, font, size, color, etc. Now, the pasted block reverts to some default setting. Oddly, if I copy multiple text blocks, the formatting is retained as expected, but not if I copy a single text block. I cannot find a preference that affects this, and I cannot figure out what might have changed. The current behaviour is definitely not desired, and is dramatically affecting my efficiency. Anyone experienced something similar or have any ideas how to correct this? Thanks.
Sure, thanks for replying so quickly. My workflow is simple. My problem is limited to copying and pasting within Fireworks. I typically select an entire block with the main selection arrow but I sometimes use this one too depending on the context. I usually just use the keyboard CTRL-C then CTRL-V to paste. Previously (and I have been using FW for years, it's always been the same) it would paste an identical text block directly over the top of the copied one, and it looked exactly the same, same font, same color, etc. Now, it pastes a new block in the center of the document and all the formatting has reverted to what I guess is the default, in this case Myriad Pro 12pt. The behavior is the same no matter which arrow I use to select the text block. I tried Edit>Copy and Edit>Paste, the effect was the same. The Duplicate function seems to work as desired, but I had never noticed or tried that command before reading your post. Using the keyboard to copy/paste is such an ingrained habit I'd much prefer to continue using it as I always have instead of trying to retrain myself. (I'm old, retraining is hard!)
(Selected block)
(pasted block)
Most often I copy and paste directly on the canvas, but occasionally will do it within the layers panel. Both now have the same undesired effect. I also tried creating a new document to see if it was a corruption in my current file, but the issue persisted to the new document as well.
Thanks. -
SOAP - XI - RFC / Problem with timeout-handle
hi gurus
B I G U R G E N T problem. how can it be:
- i've got an custom-bapi
- in receiver-rfc-adapter 'commit-controller' is on
when i force an time-out in sap ecc the soap-caller receives an system-error 'time-out...'.
but: the custom-bapi becomes an commit and in ecc the document is booked!
how can it be?
thanks
thi Rajesh
in sxmb_moni the message has the status 'log-version'.
soap-adapter-log:
2010-06-24 17:04:42 Erfolgreich calling the module processor for channel CC_SD01_WS_OUT
2010-06-24 17:04:42 Erfolgreich MP: Tritt in den Modulprozessor ein
2010-06-24 17:04:42 Erfolgreich MP: Lokales Modul localejbs/sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean wird verarbeitet
2010-06-24 17:04:42 Erfolgreich SOAP: request message entering the adapter with user KOMM
2010-06-24 17:04:42 Erfolgreich SOAP: request message leaving the adapter (call)
2010-06-24 17:04:42 Erfolgreich Die Anwendung versucht eine XI Message synchron zu senden über SOAP_http://sap.com/xi/XI/System
2010-06-24 17:04:42 Erfolgreich Versuch die Message in die Call-Queue zu stellen
2010-06-24 17:04:42 Erfolgreich Message erfolgreich in Queue gestellt
2010-06-24 17:04:42 Erfolgreich Die Message wurde erfolgreich aus der Call-Queue abgerufen
2010-06-24 17:04:42 Erfolgreich Der Status der Message wurde auf DLNG gesetzt
2010-06-24 17:05:47 Fehler Rückgabe synchroner Fehlerbenachrichtigung an rufende Anwendung: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 500 : Timeout.
2010-06-24 17:05:47 Fehler Die Übertragung der Message über http://szhm2179:8001/sap/xi/engine?type=entry ist fehlgeschlagen, weil: com.sap.aii.af.ra.ms.api.DeliveryException: Received HTTP response code 500 : Timeout
2010-06-24 17:05:47 Fehler Der Status der Message wurde auf FAIL gesetzt
2010-06-24 17:05:47 Fehler Zurück zur Anwendung. Ausnahme: com.sap.aii.af.ra.ms.api.DeliveryException: Received HTTP response code 500 : Timeout
2010-06-24 17:05:47 Fehler SOAP: call failed: com.sap.aii.af.ra.ms.api.DeliveryException: Received HTTP response code 500 : Timeout
2010-06-24 17:05:47 Fehler SOAP: call failed: com.sap.aii.af.ra.ms.api.DeliveryException: Received HTTP response code 500 : Timeout
2010-06-24 17:05:47 Fehler MP: Ausnahme aufgetreten mit Grund com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 500 : Timeout: com.sap.aii.af.ra.ms.api.DeliveryException: Received HTTP response code 500 : Timeout
rfc-adapter-log:
2010-06-24 17:04:43 Erfolgreich Message wurde erfolgreich vom Messaging-System empfangen. Profil: XI URL: http://szhm2179.stzh.ch:50100/MessagingSystem/receive/AFW/XI Credential (User): PIISUSER
2010-06-24 17:04:43 Erfolgreich Mit der Verbindung RFC_http://sap.com/xi/XI/System. Versuch die Message in die Request-Queue zu stellen
2010-06-24 17:04:43 Erfolgreich Message erfolgreich in Queue gestellt
2010-06-24 17:04:43 Erfolgreich Die Message wurde erfolgreich von der Request-Queue abgerufen
2010-06-24 17:04:43 Erfolgreich Der Status der Message wurde auf DLNG gesetzt
2010-06-24 17:04:43 Erfolgreich Liefert an Kanal: CC_SD01_RFC_IN
2010-06-24 17:04:43 Erfolgreich MP: Tritt in den Modulprozessor ein
2010-06-24 17:04:43 Erfolgreich MP: Lokales Modul localejbs/RfcAFBean wird verarbeitet
2010-06-24 17:04:43 Erfolgreich RFC-Adapter hat synchrone Message erhalten. Versucht, sRFC für /STZH/SOZ_CD_F2_BELEG_CREATE zu senden
2010-06-24 17:04:43 Erfolgreich RFC-Adapter hat synchrone Message erhalten. Versucht, sRFC für J2EE_GUEST zu senden
2010-06-24 17:05:47 Fehler SOAP: error occured: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 500 : Timeout: com.sap.aii.af.ra.ms.api.DeliveryException: Received HTTP response code 500 : Timeout
2010-06-24 17:08:43 Erfolgreich BAPI-Response war eine Struktur des Typs BAPIRET2
2010-06-24 17:08:43 Erfolgreich TYPE='S', Message (ID:/stzh/messages, NUMBER:000): "I:/stzh/messages:000 Beleg wurde erfolgreich gebucht", LOG_NO:, LOG_MSG_NO:000000 (PARAMETER:, ROW:0, FIELD:, SYSTEM:D70450)
2010-06-24 17:08:43 Erfolgreich BAPI erfolgreich ausgeführt
2010-06-24 17:08:43 Erfolgreich Commit-Transaktion mit BAPI_TRANSACTION_COMMIT
2010-06-24 17:08:43 Erfolgreich MP: Verlässt den Modulprozessor
2010-06-24 17:08:43 Fehler Zustellung der Message an die Anwendung über RFC_http://sap.com/xi/XI/System ist fehlgeschlagen weil: com.sap.aii.af.ra.ms.api.MessageExpiredException: Sync application request expired.. Message wird auf 'fehlgeschlagen' gesetzt
2010-06-24 17:08:43 Fehler Der Status der Message wurde auf FAIL gesetzt
2010-06-24 17:08:43 Fehler Rückgabe der synchronen Fehler-Message an rufende Anwendung: com.sap.aii.af.ra.ms.api.MessageExpiredException: Sync application request expired..
why does the rfc-adapter sends the bapi_transaktion_commit after an soap-error?
thank you for your help.
regards
t. -
Problems with timeout - Jersey Client
Hi, my names is Alexandre,
I'm building a client to a restful webservice using jersey as client engine. The problem is that one of the services exposed has more then 20 seconds to bring the response. And jersey doesn´t set any timeout grater then 20 seconds..... I need a timeout of, at least, 300000 miliseconds. Does anyone know how to configure a timeout in jersey, not using the method setTimeoutConnection from the com.sun.jersey.api.client.Client? This method doesn´t work for timeouts superior to 20 seconds.
Thanks in advance.Hi Alexandre,
we have the same problem. Have you resolved it ?
By the way we use Jersey-client 1.3 and setting a timeout greater than 20 seconds seems to work (I successfully tried with 60 seconds).
But is there a way (as you wondered) to set the timeout on something else than the Client object ?
We need to set short timeouts for usual requests, but for lengthy requests (like video upload) we need a much larger timeout.
If the Client class is the only place where we can set the timeout, then we'll have to use 2 Client instances, that is less than ideal...
I was more looking for a setTimeout() on WebResource or AsyncWebResource, or on their get() or post() methods...
I did RTFM, but I didn't find anything in the Jersey doc.
Hum... Just searched the source code... I confirm currently it's not possible to have a request-specific timeout...
Thierry -
Problems with RelationalDataSample exceptions thrown from VS2005
I am not sure which version of the Oracle.DataAccess .Net assy to use. But both of them throw an exception at run time.
With version 10.2.0.100 I get the following run time error.
This is the file location of this version - C:\XEClient\bin\Oracle.DataAccess.dll
As you can see this is the XE client version.
Error occurred: The type initializer for 'Oracle.DataAccess.Client.OracleConnection' threw an exception.
System.TypeInitializationException was unhandled
Message="The type initializer for 'Oracle.DataAccess.Client.OracleConnection' threw an exception."
Source="Oracle.DataAccess"
TypeName="Oracle.DataAccess.Client.OracleConnection"
StackTrace:
at Oracle.DataAccess.Client.OracleConnection.Dispose(Boolean disposing)
at System.ComponentModel.Component.Finalize()
With version 2.111.6.20 I get the following run time error.
This is the file location of this version - C:\app\john\product\11.1.0\client_1\ODP.NET\bin\2.x\Oracle.DataAccess.dll
As you can see this is the 11g install.
System.BadImageFormatException was unhandled
Message="Could not load file or assembly 'Oracle.DataAccess, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. An attempt was made to load a program with an incorrect format."
Source="RelationalDataSample"
FileName="Oracle.DataAccess, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342"
FusionLog="=== Pre-bind state information ===\r\nLOG: User = PureVirtual-1\\john\r\nLOG: DisplayName = Oracle.DataAccess, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342\n (Fully-specified)\r\nLOG: Appbase = file:///C:/Users/john/Documents/Visual Studio 2005/Projects/RelationalDataSample/RelationalDataSample/bin/Debug/\r\nLOG: Initial PrivatePath = NULL\r\nCalling assembly : RelationalDataSample, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null.\r\n===\r\nLOG: This bind starts in default load context.\r\nLOG: No application configuration file found.\r\nLOG: Using machine configuration file from C:\\Windows\\Microsoft.NET\\Framework64\\v2.0.50727\\config\\machine.config.\r\nLOG: Post-policy reference: Oracle.DataAccess, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342\r\nLOG: Attempting download of new URL file:///C:/Users/john/Documents/Visual Studio 2005/Projects/RelationalDataSample/RelationalDataSample/bin/Debug/Oracle.DataAccess.DLL.\r\nERR: Failed to complete setup of assembly (hr = 0x8007000b). Probing terminated.\r\n"
StackTrace:
at RelationalDataSample.ConnectionMgr.getDBConnection(String username, String password, String connectString)
at RelationalDataSample.EmpForm.btnConnect_Click(Object sender, EventArgs e) in C:\Users\john\Documents\Visual Studio 2005\Projects\RelationalDataSample\RelationalDataSample\EmpForm.cs:line 528
at System.Windows.Forms.Control.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at RelationalDataSample.EmpForm.Main() in C:\Users\john\Documents\Visual Studio 2005\Projects\RelationalDataSample\RelationalDataSample\EmpForm.cs:line 509
at System.AppDomain._nExecuteAssembly(Assembly assembly, String[] args)
at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly()
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()
Any help with this is greatly appreciated.
Thank you,
JohnHi John,
Are you still chasing this issue down?
I have found that one of the causes of the "System.BadImageFormatException" exception results from the following set of circumstances:
o 32-bit ODP.NET installed on 64-bit o/s
o .NET application compiled with either "Any CPU" or "x64" set for the "Platform target"
o The application is then deployed to the 64-bit host with the 32-bit ODP.NET installed
o The application executes as a 64-bit application but tries to load the 32-bit ODP.NET, thus the exception
Not sure if this might apply to your situation, but I see "C:\\Windows\\Microsoft.NET\\Framework64" in the text you provided. Since there is not yet a 64-bit release of ODP.NET 11g I wonder if this might be the case.
For what it's worth, I have not experienced any of the problems you've described in your other threads, but I am using 10.2.0.4 on Intel 64-bit with Win 2003...
- Mark -
Problem with job_close Exception INVALID_STARTDATE = 2
Following is the test program.
My requirement is to split the program execution in to multiple jobs which should run sequentially - one by one, I have populated prev job name and jobcount. As of now for the below code .. i am getting invalid_startdate exception.
Can any one please let me know, where i am wrong.
I am working on ECC 6.0.
To test the below program, copy the below program as it is in to one test program and create a ZTESTV7 program with simple write statement, that can create a spool.
Thanks,
Shilpa.
data : v_jobcount TYPE TBTCJOB-JOBCOUNT,
v_jobname TYPE TBTCJOB-JOBNAME,
v_pjobcount TYPE TBTCJOB-JOBCOUNT,
v_start type char1,
v_PCHECK type char1,
v_pjobname TYPE TBTCJOB-JOBNAME.
START-OF-SELECTION.
v_jobname = 'TEST'.
do 5 times.
if sy-index = 1.
v_start = 'X'.
V_pcheck = '' .
else.
v_start = SPACE.
v_PCHECK = 'X'.
endif.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = v_jobname
IMPORTING
JOBCOUNT = v_jobcount
SUBMIT ZTESTV7 VIA JOB V_JOBNAME NUMBER V_JOBCOUNT AND RETURN.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobcount = v_jobcount
jobname = v_jobname
PREDJOB_CHECKSTAT = v_PCHECK
PRED_JOBCOUNT = v_pjobcount
PRED_JOBNAME = v_pjobname
STRTIMMED = V_START
EXCEPTIONS
CANT_START_IMMEDIATE = 1
INVALID_STARTDATE = 2
JOBNAME_MISSING = 3
JOB_CLOSE_FAILED = 4
JOB_NOSTEPS = 5
JOB_NOTEX = 6
LOCK_FAILED = 7
INVALID_TARGET = 8
OTHERS = 9
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE 'I' NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
leave list-processing.
ENDIF.
v_pjobcount = v_jobcount.
v_pjobname = v_jobname.
enddo.This reply is already late to this question however just for future reference. I actually have the same requirement and the same error when executing FM JOB_CLOSE. Fortunately I solved the issue. You don't need to pass the job count for PRED_JOBCOUNT parameter of the FM as this causing the error. You only need the PRED_JOBNAME, which should be unique and STRTIMMED which should be marked with u2018Xu2019 always.
Itu2019s kind a weird because when I executed my program via debugging mode, it shows that this job name has this job number after calling JOB_OPEN however this job number is already assigned to the job of the previous execution of the loop. So, when JOB_CLOSE is called, it throws EXCEPTION 2. I also check SM36/37 there were jobs I created with the same job number. It seemed to me, SAP change the job number during actual execution of the job.
Maybe you are looking for
-
Problem with Java and Windows (Mainly Vista and UAC)
Hi all, I am having a problem with a program that I've devoloped. The program itself is packaged as a jar and I plan to deploy it across multiple platforms eventually however right now i am only concerned about windows based systems. I have made an i
-
Bursting with multiple attachments?
hi all, we have created a custom PO report. the report produces an xml data grouped by a vendor then by their POs. we want to use bursting but need to create separate report outputs per PO then will attach all POs to an email then send it to its corr
-
Nokia 928 GDR2 volume keeps resetting
The volume will reset from 19 down to 13 which is enough to get me to miss phone calls on occasion. Is there a way to get the default level to stay at 19? Solved! Go to Solution.
-
How can I display the contents of the array at once rather than one by one. Below programs asks user to enter 4 number then displays the numbers one by one which I do not want to. I want numbers to be displayed all in once. Many thanks. package inita
-
Ask for confirmation does not prompt - automator help
Hello everybody, I wrote a simple application to mount the Media folder of my NAS. The first step is asking for confirmation as I want to make sure I am at home when my NAS is available and I do not want to continue the script when I am at work for e