Problem with underlining text in CS3

I'm trying to underline a few bits of text, but I'm having
trouble, as there doesn't seem to be an underline tool in Flash.
The file I'm trying to do this in is here:
http://alpan.secure-mall.com/test.html
The glow effect on the text is triggered by an invisible box
in front of it, so to get the underline I'm looking for, I tried
creating a line of the appropriate color, making it a movie clip
with only two frames, one where the line is visible and one where
it isn't, and then having the trigger play the movie clip. The
problem is, it turns on and off each time I roll over the trigger.
Does anyone have any ideas on how to fix this? Thanks!

That could be a video card problem, so run a check on it.
If changing drives be sure to deactivate CS3 before doing this (in Help menu). Then activate once installed on new HD. Best to do this with disks rather than just file transfer.

Similar Messages

CS3 - Problem with dynamic text -

Hello,
I have a problems with my text, when i write a few ligne inside a dynamic text box, if i selec the text and by the way drag it down the first line goes up and disapear. Is there any way to solve this?

This is the Flash Player forum; please post your question in the appropriate product forum.

Anyone else having a Problem with Leopard and Photoshop CS3?

I'm using CS3 with Leopard 10.5.4 at work and there are some very aggravating anomalies, that I'd like to nail down to a cause. Most frequently, when switching from apps to P'Shop, the menu bar stays for the previous app, i.e. when going from Finder to P'shop, the menu bar still says Finder and has Finder options. Changing from Lightwave to P'Shop, the menu bar remains Lightwave.
Occasionally, an Adobe app - P'Shop or InDesign - will simply disappear and not come back. The icon in the dock shows it as active, but no amount of clicking, Command-Tabbing will reveal the app and I have to Force Quit, losing unsaved changes.
I have a feeling it's Leopard, since, I've used CS3 on Tiger and CS4 on Tiger and never had a problem.
I'm wondering if upgrading to the latest Leopard would make much of a difference.
Has anyone come across this and found any kind of answers?
Thanks for any suggestions.
-Vincent

> Just because it doesn't happen to Phil (who may not use all of the same features of the Suite that others do anyway) does NOT mean that these problems are not real and are not mere PEBCAK.
Right. If someone is having a problem associated with Tiger, it's PEBAK. If Leopard is involved, it's automatically because of Leopard. Apparently, with Apple's latest OS, trouble shooting problems are no longer necessary - just blame it on Leopard and call it a day.
b FUD
I find the dynamics here really interesting. This thread would have been very different if Vincent had posted with problems involving Tiger. Would have gone something like this:
After admonishing him for not providing more information about his setup by posting the obnoxious big blue link on how to ask questions (ahem - we know NOTHING about his machine or configuration, such as which machine, how much RAM, scratch disk or attached peripherals), there'd be all kinds of trouble shooting advice given - "try a new user", "repair permissions", "run DiskWarrior, and on and on ...
But no, since he mentions Leopard, none of that is apparently necessary and the completely, utterly
b irresponsible
advice is given ... "that's just the way Leopard is".
Those are some serious problems he's reporting that have nothing to do with Leopard. Something is obviously hosed!
As for discounting my experience because I don't use every app in the suite as extensively as I do Photoshop, I'm FAR more qualified to discuss Leopard and CS issues than Ann or Neil who do not use Leopard at all (and have never used it as far as I know.)
"Others have problems with it", is their battle cry but it's extremely weak. Do I really need to remind you all that these forum are ALWAYS filled with people who have problems, regardless of version or OS? You act as if this forum was a ghost town when Tiger and CS3 were current!
Gee, Ann ... people are STILL reporting problems with 10.5 and CS3? How shocking! Guess what - people are STILL reporting problems with 10.4 and CS3 too! Let me make a prediction - people will have problems with 10.8 and CS9!
Vincent-
> I don't really deal with fonts anyway ...
Yes. You do. Even if you never type a single line of text, every application uses fonts to create menus and other GUI items. If one of those fonts are bad, it can create all kinds of problems, including the very problems you mention.
The fact that you don't seem aware of this and you're still using 10.5.4 leads me to believe you're not familiar with the basic practices of maintaining a healthy system. Again, how did you install Leopard on that machine?
Look, if you're simply trying to justify using CS4, go right ahead. It's a worthwhile upgrade in it's own right. However, if you install it on that machine in it's current state, CS4 will NOT fix your problems because you do NOT have a healthy system.
You asked for experiences with Leopard - I can launch every application in both CS3 and CS4 suites
i simultaneously,
and STILL not have your issues. I haven't experienced anything like your CS3 problems in Leopard - on both a 2006 Mac Pro and a 2008 Macbook.
If you'd like help to try and figure out the real problem, I'm more than happy to help. If not, Adobe will gladly take your money ...
-phil

Problems with importing text messages from PC Suit...

Problems with importing text messages from PC Suit 7.1.18.0 to my Nokia 5800
I am trying to import a csv file that contains text messages (Note that this file was created using PC Suit 7.1.18.0) to a subfolder that I have created to My Folders but PC Suits only imports the text messages to the Draft folder. Note that initially it shows that the messages are import in the correct folder but after a refresh it shows them in the Draft Folder. Is their any setting that I should change in the PC Suit or the phone? My computer runs on Windows XP Service Pack 3 and the Nokia 5800 was upgraded to the latest firmware v20.0.012
Thanks for your help

Most phones only allows importing of draft and archived box for SMS.
To do a restoring, you need to backup the SMS as a .nbu file using PC Suite and restore later.
If you got an SD card, you can also do a backup on the SD Card (backup.arc) then restore later (reset and restore: backup.arc and mmc).
What's the law of the jungle?

A problem with copying text from english pdf to a word file

i have a problem with copying text from english pdf to a word file. the english text of pdf turns to be unknown signs when i copy them to word file .
i illustrated what i mean in the picture i attached . note that i have adobe acrobat reader 9 . so please help cause i need to copy text to translate it .

Is this an e-book? Does it allow for copying? It is possible that the pdf file is a scan of a book?

Problem with selecting text in Adobe Reader XI

Hi all, I am encountering a problem with Adobe Reader XI and it is very strange I could not find an alike issue on the internet so I guess I have to submit a question with it.
So here it is, I am using Adobe Reader XI Version 11.0.2, operating system: Windows 7. I do not know it starts from when but it has the problem with selecting text - to be copied in pdf documents. I ensure that the documents are not scanned documents but word-based documents (or whatever you call it, sorry I cannot think of a proper name for it).
Normally, you will select the text/paragraph you want to copy and the text/paragraph will be highlighted, but the problem in this case that I cannot select the text/paragraph, the blinking pointer (| <-- blinking pointer) will just stays at the same location so I cannot select/highlight anything to be copied. It happens oftenly, not all the time but 90%.
This is very annoying as my work involves very much with copying text from pdf documents, I have to close the pdf file and then open it again so I can select the text but then after the first copying or second (if I am lucky), the problem happens again. For a few text I have to type it myself, for a paragraph I have to close all opening pdf documents and open again so I could select the paragraph to copy. I ran out of my patience for this, it causes trouble and extra time for me just to copying those texts from pdf documents. Does this problem happen to anyone and do you have a solution for this? I would much appreciate if you could help me out, thank you!

Yeah, I totally agree, this is very strange. I have always been using Adobe Reader but this problem only occurred ~three months ago. It must be that some software newly installed I think. But I have no idea.
About your additional question, after selecting the texts and Ctrl + C, the texts are copied and nothing strange happens. It's just that right after I managed to copy the texts, it takes me a while to be able to select the texts again. For your information, I just tested to select the texts and then pressed Ctrl, the problem happened. And then I tried pressing C and then others letters, it all led to the problem.
I guess I have to stick with left-clicked + Copy until I/someone figure the source of this problem. Thanks a lot for your help!

Problem with append += text in Text Field

Hi guys
i have a problem with append text.
I have one array which contain some city names, like CityArea=["NAME 1", "NAME2" ...etc];
Then i have one String and one Text Field.
Using for loop im getting right results. But when im running script again then im getting same text again.
F.ex.
First time:
City name: Name 1
City name: Name 2
Second time:
City name: Name 1
City name: Name 2
City name: Name 1
City name: Name 2
I have tried to make TextField to and String to Null and delete it, but it's appearing again.. :/
How to avoid this?
Here is script:
for (var i1:int = 0; i1 < CityArea.length; i1++)
_CityAreaString1 += " "+CityArea[i1]+"";
_CityAreaString1 += " ";
_CityAreaTF1 = new TextField();
_CityAreaTF1.border = true;
_CityAreaTF1.wordWrap = true;
_CityAreaTF1.multiline = true;
_CityAreaTF1.selectable = false;
_CityAreaTF1.antiAliasType = AntiAliasType.ADVANCED;
_CityAreaTF1.name = "CityAreaTF1";
_CityAreaTF1.embedFonts = true;
_CityAreaTF1.htmlText = _CityAreaString1.toUpperCase();

I think i found why.
There was no problem with TextField.
There was a problem with Array. "CityArea"
So each time I executed script it added new string in Array. And that is because i got like:
TextField
City 1
City 2
City 1
City 2
Running this script is Ok:
for (var i1:int = 0; i1 < CityArea.length; i1++)
_CityAreaString1 += " "+CityArea[i1]+"";
_CityAreaString1 += " ";
But outside of this for loop there is another for loop for adding Cities in CityArray.
I fixed it by adding empty array at the start of function
function myFunc():void
CityArea = [ ]; // Empty array fixed this issue
// LOOP FOR ADDING SHOPS IN CITY AREA
for (var j:int = 0; j < _Shops; j++)
CityArea.push(_Shop);
// FOR LOOP TO ADDING SHOPS IN STRING
for (var i1:int = 0; i1 < CityArea.length; i1++)
_CityAreaString1 += " "+CityArea[i1]+"";
_CityAreaString1 += " ";
Thank you for your help kglad

Problem with the text from previous year in current year appraisal (PPR)

Hi Gurus,
I have some problem with the text from the PPR of the previous year in the PPR current year.
The text from the previous year have not the same displaying in the tab "previous year" of the current year PPR.
EXAMPLE :
this is write in the PPR of year 2009 in Individual Targets without Incentives (tab My S-imple) :
-Aufrechterhaltung der MA motivation, in dieser Zeit der Neuorientierung.
-G1 Unterstüzung
-Fachübergreifende Teamarbeit ausbauen
Gefährdungsbeurteilung weiter führen
-tragen von PSA einfordern
-VI Opt.(Intervalle)
-Azubi und Praktikanten AUsbildung unterstüzen
and this is what I have in the PPR of 2010 in Individual Targets without Incentives (tab Previous Year's Targets):
-Aufrechterhaltung der MA motivation, in dieser Zeit der-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
there is the error, all the end of the text isn't displayed and the begin of the text is repeated.
I think that this issue is created at the creation of the PPR.
If someone have a idea he is welcom.
thanks and regards

Hi,
Please follow the note:425601,
Go to Tcode: OBA5 change the error messge into warning message. carry out the settlement and roll abck the warning message into the error message after sucessfull settlement.
Reward points if found useful.
Thanks!

Problem with sending text messages replies

After update to OS 3.0 I have problem with sending text messages:
- I CAN send new text message to someone but
- When someone REPLY me, then I CANNOT send next message in conversation
- If I DELETE someone's reply from that conversation text message sends fine.
Anyone have this problem? I have iPhone 3g with OS 3.0 update, previously on 2.x the problem didn't appear. Carrier Orange in Poland

no my girlfriend, was useing my old N75, now she is useing her old phone last night and today. we have been texting with no problems at all. ..so i'm back in the iphone, and we're going to get her a new phone tonight,or she's going to use one of my other back-up phones till we get one for her. called at&t today to see if she could get an early upgrade before oct. just to make me happy with all the BS i've been through (10 hours or more on the phone trying to fix the problem). but at&t came through with their great customer satisfaction!!! NOT!!! so, gonna try and get her a good phone out of contract and see after hers and mine are up might just jump from at&t. very unhappy with them as how they handled this whole thing.

Premiere Elements 13 , Problems with new text/titles

Premiere Elements 13, bisher keine Probleme. Nachdem die Filmlänge etwa 15 Minuten beträgt immer größere Probleme Titel/texte einzugeben. Wartezeiten sind extrem lange oder Programm stürzt ganz ab.

High ATR,
Computer running on Widows 7 ,64 Bit System, Service Pack 1, Processor AMD Phenom(tm) X4 945 3.00 Ghz;RAM 8 GB
Grafikkarte: NVIDIA GeForce 8800 GT
If the video on the timeline is longer than 10 minutes the problem will be remarkable. The response times adding a title is getting longer(2-15 seconds).
As the video is now 18 minutes the response time is after each action(resizing of letters or any changes of the text) up to 30 seconds or the program crashes completely.
Project settings are the following:
General HD 1080i; 29,97frames/second; Video:1920v 1080 H, 30 fps
Video: maximale Bittiefe, Dateiformat i-frame only mpeg, Kompressor MPRG i-Frame, Standbilder optimieren
The video is a mixture of full HD videos 1920x 1080 .mov and pictures up to 4608x3456 pixels.
When the program crashes I remarked that the main memory RAM(8Gb) was fully used by the premiere program. Might there be a problem?
Thank you for your service.
thomasd
Von: A.T. Romano
Gesendet: Sonntag, 1. Februar 2015 23:55
An: Thomas Deschler
Betreff: Premiere Elements 13 , Problems with new text/titles
Premiere Elements 13 , Problems with new text/titles
created by A.T. Romano <https://forums.adobe.com/people/A.T.+Romano> in Premiere Elements - View the full discussion <https://forums.adobe.com/message/7151822#7151822>

Problems with recieving texts?

I am having problems with recieving text messsages, today I only had 2 hours that I recieved text messages. This has happened a few times, and when I take my phone to the verizon store they say there is no problem. Has anyone else had this problem?

hoovie,
I'm sorry to learn you are having issues with your text messaging. Just so I know I am up to speed, are you getting messages delivered to your phone on a 2 hour delay or do you have only a 2 hour window where you can receive any messages? Does this happen with only specific persons? Are you having any trouble sending text messages throughout the day?
Please advise more information so I can help further.
Thanks
AdamE_VZW
Follow us on Twitter @VZWSupport

Problem with jpg & text box links???? HELP!!!!!!!

Hi All,
I have a perplexing problem with creating some links. I created a button using the shapes tools, I use the command/shift/4 to capture the image I created, I go to photoshop, edit it, then save it as a jpeg, put it into my site, make it a link, publish the site .... then nothing. The link won't work. Any other jpeg image i put in easily converts to a link if I desire, why won't this?
Also, I have read on here that you can use a transparent text box over text to create a link without having to convert the actual text and get the annoying underline, etc. that come with it. Any idea how to do this?
Appreciate your help.
Todd
MacBook Pro Mac OS X (10.4.8)

I have a perplexing problem with creating some links. I created a button using the shapes tools, I use the command/shift/4 to capture the image I created, I go to photoshop, edit it, then save it as a jpeg, put it into my site, make it a link, publish the site .... then nothing. The link won't work. Any other jpeg image i put in easily converts to a link if I desire, why won't this?
The process that you describe should work exactly like that. I'm not sure what the issue is with those buttons. Do you have a URL where we can take a look at one of these buttons? It may be that they are getting obscured by something else maybe?
Also, I have read on here that you can use a transparent text box over text to create a link without having to convert the actual text and get the annoying underline, etc. that come with it. Any idea how to do this?
This is true. You can always overlay a SHAPE and change its opacity in the Inspector Graphics tab to 1% in order to make it transparent. It has to be 1% or more, though...zero doesn't work. Also, if the text that you want hyperlinked or hotspotted is in a textbox all by itself, then you can also attach the hyperlink to the textbox itself instead of selecting the text in the textbox. That will also avoid the underline....but it works only if the text is in a textbox all by itself.

Problems with saving in Illustrator CS3 - Windows

I'm using Illustrator CS3, Windows XP. Even the smallest files take a very long time to save. I try to save and it initally appears as if nothing is happening. If I click again, a portion of my screen goes white and the hour glass sits for what feels like forever while "Not responding" appears next to Illustrator in the bar. Eventually it finishes. Have run into the same problem with PhotoShop a couple times as well. Seems to have started after my upgrade to CS3. Can anyone help?

"it initally appears as if nothing is happening" - no-no, disk indicator should be bright and nearly no-blinking!
Solutions are (depending on the problem severity):
1. Make more layers (even for the same kind of objects, especially for texts)
2. Use RAID 5 disks for scratch files (VelocyRaptor is the best choice)
3. Use i-RAM for scratch files (if the project not too big)
4. Use RIndMA disk (http://hardwareforall.com/ww/serverRAMdisk.html) for scratch files

Problem with long text

Hi folks,
iam uploading longtext in transaction KP06 in bdc programing using create_text.
now my problem is if i pass selection criteria
case 1:
Vertion : N0
fiscal year : 2007
planner profile: CCPLAN4
then the budeget plan data uploading successfully along with long text.
case2: Vertion : N1
in this case also everthing wrking fine
case3: Vertion : 001
in this case budgetplan data uploading sucessfully but longtext is not uploading,
i debbug the proragm , create_text also returning sy-subrc = 0. but if i check in KP06 the long text is not there.
data declaration
vertion : VERSN type C(3)
can u tell me the problem is in logic or with FM ?
note : i checked with save_text also.
regards
neeru

HI Naimesh,
the FM Create_text internally contains both FMs save_text and commit_text,
even i debug the FM in case of vertion N1, N0 and 001,
all the cases sy-subrc = 0.
code:
CLEAR G_OBJNR.
LOOP AT RECORD.
COST = RECORD-BDC01.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
 EXPORTING
 input = COST
 IMPORTING
 output = COST.
 CONCATENATE 'KS' p_kokrs record-bdc00 INTO g_objnr.
 SELECT SINGLE * FROM COSP WHERE OBJNR = g_objnr
 AND GJAHR = P_GJAHR
 AND VERSN = p_ver
 AND KSTAR = COST.
IF SY-SUBRC = 0.
 LEDNR = COSP-LEDNR.
 OBJNR = COSP-OBJNR.
 GJAHR = COSP-GJAHR.
 WRTTP = COSP-WRTTP.
 VERSN = COSP-VERSN.
 KSTAR = COSP-KSTAR.
 HRKFT = COSP-HRKFT.
 VRGNG = COSP-VRGNG.
 VBUND = COSP-VBUND.
 PARGB = COSP-PARGB.
 BEKNZ = COSP-BEKNZ.
 TWAER = COSP-TWAER.
CONCATENATE LEDNR OBJNR INTO OBJNR.
CONCATENATE OBJNR GJAHR INTO TNAME1 separated BY SPACE10.
CONCATENATE TNAME1 WRTTP VERSN INTO TNAME2.
CONCATENATE TNAME2 KSTAR INTO TNAME3 separated BY SPACE.
CONCATENATE TNAME3 VRGNG INTO TNAME4 separated BY SPACE4.
CONCATENATE TNAME4 BEKNZ INTO TNAME5 separated BY SPACE10.
CONCATENATE TNAME5 TWAER INTO TNAME.
I_THEAD-TDOBJECT = 'CCSS'.
I_THEAD-TDID = 'COSP'.
I_THEAD-TDNAME = TNAME.
I_THEAD-TDSPRAS = 'E'.
APPEND I_THEAD.
i_tline-tdformat = '*'.
I_TLINE-TDLINE = RECORD-LONGTEXT.
APPEND I_TLINE.
loop at i_thead.
CALL FUNCTION 'CREATE_TEXT'
EXPORTING
 FID = I_THEAD-TDID
 FLANGUAGE = I_THEAD-TDSPRAS
 FNAME = I_THEAD-TDNAME
 FOBJECT = I_THEAD-TDOBJECT
SAVE_DIRECT = 'X'
FFORMAT = '*'
TABLES
 FLINES = i_tline
EXCEPTIONS
NO_INIT = 1
NO_SAVE = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDLOOP.
CLEAR I_TLINE.
REFRESH I_TLINE.
CLEAR I_THEAD.
REFRESH I_THEAD.
SELECT SINGLE * from cokp into itab WHERE OBJNR = g_objnr
 AND GJAHR = P_GJAHR
 AND VERSN = p_ver
 AND KSTAR = COST.
if sy-subrc = 0.
 itab-TXFLG = 'X'.
 append itab.
 write:/ 'Text saved for', record-bdc00 , record-bdc01.
 else.
 write:/ 'Text saved for', record-bdc00 , record-bdc01.
 ENDIF.
ENDIF.
my program wrking fine but the long text is not visible for vertion 001.
regards
niru

Problem with selecting text in a PDF document

I'm having a problem with Acrobat 9 and Reader 9. PDF document that has copying and selecting permissions granted, when I highlight text for copying, some of it gets highlighted and some doesn't. Put the same document on several computers in the office, same issue. It's the document, but I can't figure out what the deal is.
We need to copy large portions of this into a new tech manual.
Can someone help

Without further information, my first reaction is to think that the texts that you cannot copy are included as images.

Problem with underlining text in CS3

Similar Messages

Maybe you are looking for