Problem with wirless network connection to server.

I'm experiencing a rather strange problem that has occurred since replacing a rather old adsl modem/router.
I have a Windows 7 notebook that will not connect to a server (win 2008 r2) via wirless but will do so over ethernet. It
can access the internet as normal, I'm using it for this post in fact. Other devices on the network - including the server- are visible in the network and sharing panel.
When attempting to connect I get an error message saying 'Windows cannot access servername' and an error code 0x80070035 network path not found.
I'm inclined to think that it is a setting on the Windows 7 notebook itself as another laptop - my MacBook (running Mountain Lion) is able to access the server wirlessly.
Obviously, I could, if necessary use a wired connection, but that is a workround rather than a fix. I'm rather puzzled by it all.
Any input would be very much appreciated.
Adam

Hi,
Do you mean you cannot access the shared folder on server when you connect internet via wireless?
How about accessing via IP address?
Try to flush DNS to check the result.
Alex Zhao
TechNet Community Support

Similar Messages

Problems with WiFi network connectivity post 2.1 upgrade

Have been having problems with WiFi connectivity since installing the 2.1 upgrade. When attempting to view some websites I get a "Safari cannot open the page because it is not connected to the internet" message. The same addresses can be resolved from my iMac at the the same time. Other websites don't have problems. Funnily enough www.apple.com is one of the effected sites.
I can also only sporadically gain access to the App store & the iTunes store from the device. I mostly get a message stating - "Cannot connect to iTunes store".
I am connecting through a WPA encrypted access point. I have tried restoring the device, resetting network settings, etc.
Has anyone else experienced this? After work tonight I will temporarily set my access point to WEP, just to see if the problem may be related to WPA. I have read that the iPod touch is effected by this.
Thanks,
Matt

No problem. The iPhone uses lower power on the WiFi transceiver to save the battery. It won't have the 50 meter range that one might see for other devices. As long as it works reliably when it is closer to the access point it is working normally.

T520 problem with Wireless Network Connection Adaptors

I was in Windows 7 Device Manager's Network Connections trying to fix a minor WIFI problem by uninstalling the drivers and then scanning for hardware changes to reinstall them. I uninstalled a driver that the scan didn't pick up to reinstall, and I didn't write down its name. Now the WIFI does not work at all. I've updated the two drivers left in Network Adapters:
Intel 82579LM Gigabit Network Connection for my ethernet
Intel Centrino Ultimate-N 6300 AGN for my WIFI
Does anyone know the name of the wireless driver I uninstalled? Does the 520 require two wireless network adaptor drivers? Can't seem to find info on it anywhere!
What I've done:
I ran Intel's PROSet/Wireless WiFi Connection Utility diagnostic tools. The hardware test fails saying "Wireles Hardware is not boudn to transport driver". The Driver Test passed saying "Driver is loaded. Netwsw00 Version: 15.4.1.1. The Radio Test failed saying "Failure geting network radio status!". After that the Scant Test, Asociation Test, Authentificaiton Test, Siganl Test and Ping Test all failed.
Installed every 64 bit LAN wireless network adaptor driver I could find in the T520 section of Lenovo's site
Any assistance appreciated. I'm a bit of a noob.
Thanks
T520 4239 CTO
Windows 7 Home Premium 64 bit

Here is the list.
Try scan for new devices in Device manager otherwise you likely have to reinstall the package again.
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3
Attachments:
NA.jpg ‏29 KB

HP 175nw Problems with Wireless Network Connection - Mac OS X 10.8.3

Please help!
I have an HP 175nw, from one day to the next it decided it was no longer going to connect to the wirless connection.
I run a Mac on 0S X 10.8.3.
I can't find the installation software (the whole software not just the driver) on the web and the CD is worthless b/c this is a Mac.
I installed the printer on my windows laptop and it works fine, it connected to the wireless network using the setting sets on my laptop, it now prints wireless no problem, but not with the Mac.
I have plugged the printer directly into the Mac but the Mac doesn't even seem to recognize it. The printer shows up on my printer list but when I try to print or scan from it the Mac says the printer is offline.
I need this printer/scanner for work desperately, Any ideas would be greatly appreciated.

First, download and install this: http://support.apple.com/kb/DL907
Restart your Mac.
Next, download and install this: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=kj-107394-1&cc=us&dlc=en&lc=en...
What router are you using?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Strange problem with the internet connection

Hello,
I've a strange problem with the network connection , I have bought a Iphone 3g in Italy in date 31st
October 2010. Now in Italy I have just subscribed a telephone rental with Wind company, where there is an unlimited internet service. The problem is that in my Iphone there is not the line.
All this is strange because I receive the messages from social networks (like facebook and msn) but I cannot open tha page for the internet connection. I have gone to Apple store and I have tried to put my SIM in an other phone (iphone 3g or 3gs): my SIM is perfectly working.
The problem is only for the internet connection on my phone because wifi connection is good.
Thanks!!

Please help everyone who has the same problem by posting yr solution, thx!

Problems with n97 apps connecting to network (Voda...

Problems with n97 apps connecting to network (Vodafone UK – 3G)
Recently a number of my apps which used to connect automatically to the internet (which ever was available – known wi-fi or 3g) have stopped doing this. They now only connect to one known wi-fi.
I’ve tried uninstalling and reinstalling each app, but this hasn’t solved the problem. I’ve checked for software updates and do not believe any have been applied or are available. All apps have been downloaded via Ovi on the phone. I still am able to access the internet by the web browser which was installed on the phone and via google maps (which also still manages GPS position, search, etc).
The apps which I notice causing a problem are:
Sainsbury’s/nectar
Tesco
Map my tracks
Snaptu
Opera Mini
Any one got any ideas???

I have the same problem since i updated my mac to 10.5.6.
Each time I have to do a diagnostic and retype the WEP password to have the internet connection.

I cant connect with my imessage and facetime in my iphone; i already upload de i os 7.02 but the message still have it; it said that they have problem with the network; i reset the network and doesnt work

I cant connect with my imessage and facetime in my iphone; i already upload de i os 7.02 but the message still have it; it said that they have problem with the network; i reset the network and doesnt work

Hello, Toro Silva.
Thank you for visiting Apple Support Communities.
The steps in the section labeled Unable to activate FaceTime or iMessage with phone number and Apple ID after waiting 24 hours (iPhone only) of the article below, should help resolve the issue. Make sure to create a current backup prior to processing these steps.
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Cheers,
Jason H

Time Machine - Problem with establishing a connection to the server

Using LionMac OS X Version 10.7 and when attempting to setup Time Machine to make backupto my ReadyNas Duo, the setup fails and I receive the following message(translated from Danish):
“There wasa problem with establishing a connection to the server ”SERVERNAME”.
The versionof the server that you attempt to establish connection to, is not supported.Contact the system administrator to solve the problem.”
Any ideasfor a solution?

Please follow these instructions:
Lion: Connecting to legacy (pre-Lion) AFP services - and Mac OS X (server):
https://discussions.apple.com/thread/3258472

Problem with shares on Windows 2003R2 server from a Windows 8.1 PC

I'm having problem with shares on Windows 2003R2 server from a Windows 8.1 PC. It times out when I try to copy a file from my PC to the server and I get an error message saying "There is a problem accessing network drive W:\. Make sure you are
connected to the network and try again."
I have no problem copying files from the server to the PC.
Any ideas?

Hi,
How about your problem now? Have you test other machine also installed Windows 8.1? Did they have this problem?
To diagnose this problem, firstly, please check Windows 2003R2 firewall settings, also can disable firewall temporarilly for test.
Secondly, try to use Network Monitor to capture network communication package for test.
Network Monitor:
http://www.microsoft.com/en-us/download/details.aspx?id=4865
Roger Lu
TechNet Community Support

Problems with Oracle 11g on Win2008 server

Hi all,
we changed our database 10g on W2K3 to 11g with Win 2008 server on weekend
Since yesterday we have problems with the database. On monday we had no problems.
The problems begun on tuesday. The assemly lines are connecting to the server with a tnsnames.ora, who placed on a networkshare.
here the tnsnames.ora:
# TNSNAMES.ORA Network Configuration File: C:\Oracle\product\10.2.0\client_1\NETWORK\ADMIN\tnsnames.ora
# Generated by Oracle configuration tools.
IFILE=M:\TNSNAMES\tnsnames.ora
ORACLE.MEKRA.NET =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = caq01)(PORT = 1521))
(CONNECT_DATA =
(SID = qsys)
Every PC on the assembly lines has this tnsnames.ora and a connection to the mapping M:
Today we had already the same problem. Some PCs got a connection to the DB and some got suddenly no connection.
After 15 minutes diagnostics we stopped and started the db.
The PCs got after the restart a connection.
On the clients is the oracle client 10g installed, but I think thats not the problem.
I don't know whats the problem can be.
I hope you can help me or have some idea's?
The TNSnames.ora on the server:
# tnsnames.ora Network Configuration File: D:\Oracle\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORALB1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.2.188)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = oralb1.mekra.net)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
The first problem we solved yesterday, we had two oralb1 entrences in the dns as static.
One of them we deleted.
The dns should be not a problem now.
an idea? I hope so....
thanks for reading.
bye

852138 wrote:
Hi all,
we changed our database 10g on W2K3 to 11g with Win 2008 server on weekend
Since yesterday we have problems with the database. On monday we had no problems.
The problems begun on tuesday. The assemly lines are connecting to the server with a tnsnames.ora, who placed on a networkshare.
here the tnsnames.ora:
# TNSNAMES.ORA Network Configuration File: C:\Oracle\product\10.2.0\client_1\NETWORK\ADMIN\tnsnames.ora
# Generated by Oracle configuration tools.
IFILE=M:\TNSNAMES\tnsnames.ora
ORACLE.MEKRA.NET =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = caq01)(PORT = 1521))
(CONNECT_DATA =
(SID = qsys)
Every PC on the assembly lines has this tnsnames.ora and a connection to the mapping M:
Today we had already the same problem. Some PCs got a connection to the DB and some got suddenly no connection.There must be some clue .. a tns error message ...
>
After 15 minutes diagnostics we stopped and started the db.
The PCs got after the restart a connection.
On the clients is the oracle client 10g installed, but I think thats not the problem.
I don't know whats the problem can be.
I hope you can help me or have some idea's?
The TNSnames.ora on the server:tnsnames is used only by client processes. When you say "on the server" are you talking about the one pointed to by the IFILE in the local tnsnames shown above? If not, if this just happens to be the tnsnames on the database server, then it has no bearing on your problem.
# tnsnames.ora Network Configuration File: D:\Oracle\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORALB1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.2.188)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = oralb1.mekra.net)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
The first problem we solved yesterday, we had two oralb1 entrences in the dns as static.
One of them we deleted.
The dns should be not a problem now.
an idea? I hope so....
At a previous employer we used a shared tnsnames file. It was not on the db server but on a file server, specifically for shareing. Occasionally there would be an issue with the network connection to that file server, or our dimwit SA would change the sharing permissions. Of course he claimed there was no issue on his end and I had to take my own network traces to prove it was.
thanks for reading.
bye

Time Machine and "might be a problem with your network"

Hi! My Power Mac is from 2008, and I'm in the middle of replacing my hard drive. Here's a summary of what I've gone through, including various trouble shooting...
OK, the hard drive dies (all of which I wrote about in an earlier thread and, I think, not very relevant for this thread). While waiting to buy my replacement, I created an external bootable drive, hooked up via FW800. I created a new User Account, and then I used the Migration Assistant to bring in all the user settings, files, etc, from my Time Machine. It took many hours and and during the stage when it was transferring files, it gave me the prompt: "There might be a problem with your network. The other Mac is not responding. Make sure that all of your network devices are connected and turned on. Also, make sure that your Ethernet cables are still connected properly to your computer and to the network, or if using AirPort, that the base station is in range and turned on." After clicking "Continue" got me nowhere, I clicked Cancel, and it was a very incomplete migration [no apps, no files]. I didn't sweat this since this external drive is a temporary solution anyway.
Tonight I came home with the new internal drive, installed it, installed Leopard, and began the Setup Assistant. I got the same prompt as last night. NOTE: This time with Setup Assistant; last night was with Migration Assistant.
I notice from reviewing the boards that this Time Machine glitch seemed to happen a few years ago, in Leopard, and maybe hasn't happened since. But I haven't read a thread with a solution. (Maybe I missed it?)
A few things come to mind:
1. Could there be an issue with the fact that the computer is only 10.5 and many of the files/apps may have been installed when I was running 10.5.8? I'm just tossing that out there. For instance, what if I set up an initial User account, then updated the software to 10.5 and THEN used Migration Assistant to bring in the older account?
2. Soon, since I'm reinstalling Leopard, I'll get the prompt to use Setup Assistant, and this time I'll just select account settings and apps. I'll bring in the files manually, later. Since the progress window seems to get hung up during the file-transferring stage, maybe I'll have better luck if I skip that.
If anyone has any suggestions, man, I'd be way grateful!
Thanks!

"try trashing the timemachine.plist in your original user's Library>Preferences."
I didn't even get to that step. Here's what happened.
I went back to my original Admin account (the one I restored via Setup Assistant, from my Time Machine backup), and ran Migration Assistant again. I selected Applications only and when it gave me a prompt about the account name already existing. So, I created a new account name (TEMP 1, I called it).
All of my applications were restored.
Next, I tried it with all the files and folders. It didn't give me the duplicate name prompt this time. It copied all my flles and folders over.
Was it perfect? Well, a lot of the apps need some fresh registration and some upgrading, but I suppose that's to be expected. Or is it?
While I feel like this problem is in my rear-view mirror, I'm still interested in your suggestons for a Time Machine altenative.
Thanks again for your advice!

Both xp and windows 7 have video problems with my VGA connection using TV

both xp and windows 7 have video problems with my VGA connection using TV as my monitor when it gets to starting up windows no matter what version it will not I have let my mac on all night and still says starting windows or the windows 7 logo and nothing else will happen also when I use a 3rd patty software like peraills or other it works like a charm how to fix it?

To map the drive on your computer click on Start - RUN - type "\\192.168.1.1" and click ok... When prompted for Username and Password type "admin" and click ok... Now you will be able to see the folder which you have shared on your router, right click on it and select "Map network drive" and click on finish.
Now it will map the drive on your computer and you should be able to transfer the file from your computer to the USB drive.

Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

Some progess I see. To be honest, i would not waste your time with trying to connect using wireless.
You are likely to get poor connections and dropping out.
If its working using a cable, then there is no need to bother with giving me the network settings, bu see how it goes, because sometimes giving the TV a static IP address can give better results.
There is an example of a couple of powerline adapters on the diagram below. Just ignore the network switch unless you want to connect other devices which are near to the TV.
http://forumhelp.dyndns.info/networking/powerline3.jpg
I will monitor the subject line of this thread, should you want to post any more information.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Has Apple fixed the problem with 4G cellular connection?

Has Apple fixed the problem with 4G cellular connection on the iPad 3?

Cellular connection problem was for US connection in Houston, Texas. Have an iPad 2 which functions perfectely on Wi-Fi or 3G. Bought an iPad 3 strictly to get the increased speed from the 4G LTE connection. Purchased on with the AT &T cellular. Wi-Fi functions fine, but 4G LTE connection is terrible when it connects at all. Went to AT&T and they said no problems with service in my area, but never get over 2 bars and most times, Web pages load very slow or will hang and not load at all. Went to the Apple store and they said it was AT&T network problem and went to AT&T and they said no problems with their service. Went to the Apple communities forum here and discovered that many people were having the same problems with the 4G LTE cellular connection on their iPad 3's. Didn't seem to matter if it was AT&T or Verizon. So I decided that I would just return the unit and wait for Apple to fix the problem. Hence my question.
Appreciate very much your time in responding to my question.

Organizer elements 11. Problem with your internet connection

I am trying to access facebook and Flickr via the Organizer with elements 11. I went to preferences and cleared the oline services, when I try to refresh the partner services I am greeted with the error " there is a problem with your internet connection, check your firewall settings" .
Windows 8, updated. I tried disabling the firewall. I have also tried making sure permissions are set up to allow all adobe products access through the frewall when it is enabled. No other network managment services or virus scanners installed. just default 64bit windows 8.
I am currently left with no partner services; facebook, flicker, picasa, etc.... I could reinstall organizer i guess to get the default services back...
I found discussions on the web but none with a solution. http://forums.adobe.com/message/4035670
Any help would be great

I apologize for the delay. An update was released shortly after I posted the question that resolved the issue. Thank you for your assistance though. As soon as I read your advice I went to my laptop to follow your instructions. Upon opening photoshop I was prompted with an adobe update message. After the update the issue was resolved. Again, sorry for not updating the situation.

Problem with wirless network connection to server.

Similar Messages

Maybe you are looking for