Problem with wpa_supplicant unstable

Hello, I have some problems using wpa_supplicant. I didn't really noticed since when, because my router wasn't working for some time, but I suspect it was the upgrade to the kernel 2.6.32.
Anyway, my connection is too unstable, very slow most of times, but sometimes fast(between 0k/s to 1500k/s), and drop after a minute.
At the beginning, the connection is obtained slower than usual.
And after around a minute(sometimes more), I have in wpa_supplicant logs this message:
RTM_NEWLINK: operstate=1 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'ath0' added
Wireless event: cmd=0x8b19 len=16
Received 799 bytes of scan results (2 BSSes)
New scan results available
Selecting BSS from priority group 1
Try to find WPA-enabled AP
0: 00:18:39:32:c5:81 ssid='linksys' wpa_ie_len=26 rsn_ie_len=24 caps=0x11
selected based on RSN IE
selected WPA AP 00:18:39:32:c5:81 ssid='linksys'
Already associated with the selected AP.
In general, when I got this message after the connection(somtimes it's after the second time), the internet doesn't work anymore, even if the interface is still there, and iwconfig and iwlist scan shows the right information. There's no message in the logs, no error, no nothing. And I have to kill wpa_supplicant to reconnect.
I wonder if anyone have the same problem, or knows why I have this "wireless event".
My configuration is a Linux64, atheros card(DLink DWA547), using WPA2 security
In wpa_supplicant.conf:
network={
ssid="linksys"
proto=RSN
psk=xxxxxxx
priority=1
Here's the log of the connection
Initializing interface 'ath0' conf '/etc/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
eapol_version=1
ap_scan=1
fast_reauth=0
Line: 509 - start of a new network block
ssid - hexdump_ascii(len=7):
6c 69 6e 6b 73 79 73 linksys
proto: 0x2
PSK - hexdump(len=32): [REMOVED]
priority=1 (0x1)
Priority group 1
id=0 ssid='linksys'
Initializing interface (2) 'ath0'
Interface ath0 set UP - waiting a second for the driver to complete initialization
SIOCGIWRANGE: WE(compiled)=22 WE(source)=18 enc_capa=0xf
capabilities: key_mgmt 0xf enc 0xf flags 0x0
WEXT: Operstate: linkmode=1, operstate=5
Own MAC address: 00:1c:f0:5b:d8:0a
wpa_driver_wext_set_wpa
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_countermeasures
wpa_driver_wext_set_drop_unencrypted
RSN: flushing PMKID list in the driver
Setting scan request: 0 sec 100000 usec
WPS: UUID based on MAC address - hexdump(len=16): f7 e2 2f 2e e3 9d 51 47 9a e6 b8 17 a9 14 0e 90
WPS: Build Beacon and Probe Response IEs
WPS: * Version
WPS: * Wi-Fi Protected Setup State (0)
WPS: * Version
WPS: * Wi-Fi Protected Setup State (0)
WPS: * Response Type (2)
WPS: * UUID-E
WPS: * Manufacturer
WPS: * Model Name
WPS: * Model Number
WPS: * Serial Number
WPS: * Primary Device Type
WPS: * Device Name
WPS: * Config Methods (0)
WPS: * RF Bands (3)
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
Added interface ath0
RTM_NEWLINK: operstate=0 ifi_flags=0x1002 ()
RTM_NEWLINK, IFLA_IFNAME: Interface 'ath0' added
Ignore event for foreign ifindex 3
Ignore event for foreign ifindex 3
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'ath0' added
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'ath0' added
Wireless event: cmd=0x8b06 len=12
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Trying to get current scan results first without requesting a new scan to speed up initial association
Received 440 bytes of scan results (1 BSSes)
New scan results available
Selecting BSS from priority group 1
Try to find WPA-enabled AP
0: 00:18:39:32:c5:81 ssid='linksys' wpa_ie_len=26 rsn_ie_len=24 caps=0x11
selected based on RSN IE
selected WPA AP 00:18:39:32:c5:81 ssid='linksys'
Trying to associate with 00:18:39:32:c5:81 (SSID='linksys' freq=2462 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
RSN: using IEEE 802.11i/D9.0
WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2 proto 2
WPA: set AP WPA IE - hexdump(len=28): dd 1a 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 04 00 50 f2 02 01 00 00 50 f2 02
WPA: set AP RSN IE - hexdump(len=26): 30 18 01 00 00 0f ac 02 02 00 00 0f ac 04 00 0f ac 02 01 00 00 0f ac 02 00 00
WPA: using GTK TKIP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
No keys have been configured - skip key clearing
wpa_driver_wext_set_drop_unencrypted
State: SCANNING -> ASSOCIATING
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_wext_associate
wpa_driver_wext_set_psk
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
RSN: Ignored PMKID candidate without preauth flag
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'ath0' added
Wireless event: cmd=0x8b06 len=12
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'ath0' added
Wireless event: cmd=0x8b04 len=16
EAPOL: disable timer tick
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'ath0' added
Wireless event: cmd=0x8b19 len=16
Received 799 bytes of scan results (2 BSSes)
New scan results available
Selecting BSS from priority group 1
Try to find WPA-enabled AP
0: 00:18:39:32:c5:81 ssid='linksys' wpa_ie_len=26 rsn_ie_len=24 caps=0x11
selected based on RSN IE
selected WPA AP 00:18:39:32:c5:81 ssid='linksys'
Already associated with the selected AP.
RSN: Ignored PMKID candidate without preauth flag
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'ath0' added
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'ath0' added
Wireless event: cmd=0x8b15 len=24
Wireless event: new AP: 00:18:39:32:c5:81
State: ASSOCIATING -> ASSOCIATED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
Associated to a new BSS: BSSID=00:18:39:32:c5:81
No keys have been configured - skip key clearing
Associated with 00:18:39:32:c5:81
WPA: Association event - clear replay counter
WPA: Clear old PTK
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: enable timer tick
EAPOL: SUPP_BE entering state IDLE
Setting authentication timeout: 10 sec 0 usec
Cancelling scan request
RX EAPOL from 00:18:39:32:c5:81
RX EAPOL - hexdump(len=99): 02 03 00 5f 02 00 8a 00 10 00 00 00 00 00 00 00 01 86 e5 80 cf 87 fc 5f 82 84 78 23 70 57 61 ae 6b da 1d 82 cc 29 0d a0 1c ea 55 f2 7d 30 4e 5f 51 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Setting authentication timeout: 10 sec 0 usec
IEEE 802.1X RX: version=2 type=3 length=95
EAPOL-Key type=2
key_info 0x8a (ver=2 keyidx=0 rsvd=0 Pairwise Ack)
key_length=16 key_data_length=0
replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 01
key_nonce - hexdump(len=32): 86 e5 80 cf 87 fc 5f 82 84 78 23 70 57 61 ae 6b da 1d 82 cc 29 0d a0 1c ea 55 f2 7d 30 4e 5f 51
key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
WPA: RX EAPOL-Key - hexdump(len=99): 02 03 00 5f 02 00 8a 00 10 00 00 00 00 00 00 00 01 86 e5 80 cf 87 fc 5f 82 84 78 23 70 57 61 ae 6b da 1d 82 cc 29 0d a0 1c ea 55 f2 7d 30 4e 5f 51 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
State: ASSOCIATED -> 4WAY_HANDSHAKE
WPA: RX message 1 of 4-Way Handshake from 00:18:39:32:c5:81 (ver=2)
RSN: msg 1/4 key data - hexdump(len=0):
WPA: Renewed SNonce - hexdump(len=32): 69 01 18 59 3a c2 52 d7 26 3c db 92 51 7e 4b 97 d3 3e 0a a7 cf 32 9c 82 58 2f 8a eb 3d b6 6a af
WPA: PTK derivation - A1=00:1c:f0:5b:d8:0a A2=00:18:39:32:c5:81
WPA: PMK - hexdump(len=32): [REMOVED]
WPA: PTK - hexdump(len=48): [REMOVED]
WPA: WPA IE for msg 2/4 - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
WPA: Sending EAPOL-Key 2/4
WPA: TX EAPOL-Key - hexdump(len=121): 01 03 00 75 02 01 0a 00 00 00 00 00 00 00 00 00 01 69 01 18 59 3a c2 52 d7 26 3c db 92 51 7e 4b 97 d3 3e 0a a7 cf 32 9c 82 58 2f 8a eb 3d b6 6a af 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 05 a1 cc 03 76 20 64 f4 a5 77 2a b9 59 3d 52 d9 00 16 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
RX EAPOL from 00:18:39:32:c5:81
RX EAPOL - hexdump(len=203): 02 03 00 c7 02 13 ca 00 10 00 00 00 00 00 00 00 02 86 e5 80 cf 87 fc 5f 82 84 78 23 70 57 61 ae 6b da 1d 82 cc 29 0d a0 1c ea 55 f2 7d 30 4e 5f 51 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 41 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 14 30 dc 3f 93 b3 15 ac 51 70 cb 6c c6 19 1c 79 00 68 c0 46 a1 2c f7 e0 e6 9b b6 b0 25 b1 7f 9b ac cc de 1f a4 ab 28 29 22 82 16 bd 12 4e 0d 12 c1 54 d4 58 9c 2d cc f1 f2 c2 f3 81 b7 0b f4 92 c2 69 73 31 d5 5b d6 7f 35 d1 40 1a 71 4d dc 58 b9 43 e7 69 d7 25 25 48 da ad 5c 2f 70 96 32 f2 24 ba 2f b6 9c 97 dc 34 f6 e4 37 4a 3d 41 ad 00 7c 6d 46 07 9f b6 c3 3f 9c a9
IEEE 802.1X RX: version=2 type=3 length=199
EAPOL-Key type=2
key_info 0x13ca (ver=2 keyidx=0 rsvd=0 Pairwise Install Ack MIC Secure Encr)
key_length=16 key_data_length=104
replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 02
key_nonce - hexdump(len=32): 86 e5 80 cf 87 fc 5f 82 84 78 23 70 57 61 ae 6b da 1d 82 cc 29 0d a0 1c ea 55 f2 7d 30 4e 5f 51
key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
key_rsc - hexdump(len=8): 41 02 00 00 00 00 00 00
key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
key_mic - hexdump(len=16): 14 30 dc 3f 93 b3 15 ac 51 70 cb 6c c6 19 1c 79
WPA: RX EAPOL-Key - hexdump(len=203): 02 03 00 c7 02 13 ca 00 10 00 00 00 00 00 00 00 02 86 e5 80 cf 87 fc 5f 82 84 78 23 70 57 61 ae 6b da 1d 82 cc 29 0d a0 1c ea 55 f2 7d 30 4e 5f 51 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 41 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 14 30 dc 3f 93 b3 15 ac 51 70 cb 6c c6 19 1c 79 00 68 c0 46 a1 2c f7 e0 e6 9b b6 b0 25 b1 7f 9b ac cc de 1f a4 ab 28 29 22 82 16 bd 12 4e 0d 12 c1 54 d4 58 9c 2d cc f1 f2 c2 f3 81 b7 0b f4 92 c2 69 73 31 d5 5b d6 7f 35 d1 40 1a 71 4d dc 58 b9 43 e7 69 d7 25 25 48 da ad 5c 2f 70 96 32 f2 24 ba 2f b6 9c 97 dc 34 f6 e4 37 4a 3d 41 ad 00 7c 6d 46 07 9f b6 c3 3f 9c a9
RSN: encrypted key data - hexdump(len=104): c0 46 a1 2c f7 e0 e6 9b b6 b0 25 b1 7f 9b ac cc de 1f a4 ab 28 29 22 82 16 bd 12 4e 0d 12 c1 54 d4 58 9c 2d cc f1 f2 c2 f3 81 b7 0b f4 92 c2 69 73 31 d5 5b d6 7f 35 d1 40 1a 71 4d dc 58 b9 43 e7 69 d7 25 25 48 da ad 5c 2f 70 96 32 f2 24 ba 2f b6 9c 97 dc 34 f6 e4 37 4a 3d 41 ad 00 7c 6d 46 07 9f b6 c3 3f 9c a9
WPA: decrypted EAPOL-Key key data - hexdump(len=96): [REMOVED]
State: 4WAY_HANDSHAKE -> 4WAY_HANDSHAKE
WPA: RX message 3 of 4-Way Handshake from 00:18:39:32:c5:81 (ver=2)
WPA: IE KeyData - hexdump(len=96): 30 18 01 00 00 0f ac 02 02 00 00 0f ac 04 00 0f ac 02 01 00 00 0f ac 02 00 00 dd 1a 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 04 00 50 f2 02 01 00 00 50 f2 02 dd 26 00 0f ac 01 02 00 61 5d c5 e9 0c 67 2d ad 05 07 6d 9d 42 5a 0a 52 ff 0b 0f 1e 05 63 1a 6c 57 53 c0 54 2b 20 2e 44 dd 00
WPA: Sending EAPOL-Key 4/4
WPA: TX EAPOL-Key - hexdump(len=99): 01 03 00 5f 02 03 0a 00 00 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 77 12 f7 83 4a fc 6a 7d 57 b3 2d 50 cf e7 5f 9d 00 00
WPA: Installing PTK to the driver.
wpa_driver_wext_set_key: alg=3 key_idx=0 set_tx=1 seq_len=6 key_len=16
EAPOL: External notification - portValid=1
State: 4WAY_HANDSHAKE -> GROUP_HANDSHAKE
RSN: received GTK in pairwise handshake - hexdump(len=34): [REMOVED]
WPA: Group Key - hexdump(len=32): [REMOVED]
WPA: Installing GTK to the driver (keyidx=2 tx=0 len=32).
WPA: RSC - hexdump(len=6): 41 02 00 00 00 00
wpa_driver_wext_set_key: alg=2 key_idx=2 set_tx=0 seq_len=6 key_len=32
WPA: Key negotiation completed with 00:18:39:32:c5:81 [PTK=CCMP GTK=TKIP]
Cancelling authentication timeout
State: GROUP_HANDSHAKE -> COMPLETED
CTRL-EVENT-CONNECTED - Connection to 00:18:39:32:c5:81 completed (auth) [id=0 id_str=]
wpa_driver_wext_set_operstate: operstate 0->1 (UP)
WEXT: Operstate: linkmode=-1, operstate=6
EAPOL: External notification - portValid=1
EAPOL: External notification - EAP success=1
EAPOL: SUPP_PAE entering state AUTHENTICATING
EAPOL: SUPP_BE entering state SUCCESS
EAP: EAP entering state DISABLED
EAPOL: SUPP_PAE entering state AUTHENTICATED
EAPOL: SUP
Last edited by ondo (2010-03-16 22:09:08)

Not solved, but my workaround was to downgrade to kernel 2.6.31+madwifi0.9.4096. Apparently there was nothing special to the suspicious message from the logs, as it was already there and it still works.

Similar Messages

Having Problems with wpa_supplicant

So for some reason wpa_supplicant occassionally works for me, but for the great majority of the time does not. I feel as though I have tried everything. At the moment, I have a very simple configuration. My wpa_supplicant.conf is the standard home network config in the documentation:
# allow frontend (e.g., wpa_cli) to be used by all users in 'wheel' group
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=wheel
# home network; allow all valid ciphers
network={
ssid="home"
scan_ssid=1
key_mgmt=WPA-PSK
psk="very secret passphrase"
Here is what happens when I run wpa_supplicant:
http://pastebin.com/6W48wD2v
Needless to say, when I run dhclient, it isn't able to get an IP, and just times out.
EDIT: It is important to note that my ssid is "AFK - Fucking Bitches." It also seems that I cutoff the very last portion of the log, before wpa_supplicant goes into an indefinite loop. It goes on to blacklist the AP that I want to connect to, just fyi. That log should give you pretty much everything though.
EDIT: It is also important to note that I am using a AE1000 wireless adapter, with the RT3572sta module installed.
Last edited by jayd3e (2011-03-20 17:51:19)

So I fixed it. In the wiki when it says that all network managers (including other wpa_supplicant daemons) need to be killed before running wpa_supplicant, it really means it! I was having a number of issues, but the biggest one being, I was starting multiple instances of wpa_supplicant as daemons with the -B flag.

Wireless problems with AR5212, wpa_supplicant and dhcpcd. [solved]

Dear friends,
I am currently experiencing problems with getting my AR5212 wireless card to work with wpa_supplicant and the ath5k driver. Everything is set up according to the Arch Wireless Setup Wiki http://wiki.archlinux.org/index.php/Wireless_Setup. First, I do the following:
# ifconfig wlan0 up
# iwconfig wlan0 essid Prairiedog
# wpa_supplicant -B -Dwext -iwlan0 -c /etc/wpa_supplicant.conf
It goes well even up until the point where I wish to request a dhcp lease from my router.
# dhcpcd wlan0
wlan0: dhcpd 4.0.10 starting
wlan0: braodcasting for a lease
wlan0: offered 192.168.0.2 from 192.168.0.1 'm'
wlan0: checking 192.168.0.2 is available on attached networks
wlan0: leased 192.168.0.2 for 86400 seconds
Excerpt from ifconfig:
Link encap:Ethernet HWaddr 00:56:A4:44:DA:1A
inet addr:192.168.0.2 Bcast: 255.255.255.255 Mask 255.255.255.0
My wireless card should then be associated with 192.168.0.2...
What confuses me is that I cannot get the my wireless net card to ping any addresses. It seems that there is no connection to the outer world, despite the fact that an address has been assigned by my router. When I for example do a
# ping www.google.com
I get the response
ping: unknown host www.google.com
What is even more strange is that I cannot ping the router itself:
# ping 192.168.0.1
PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data
From 192.168.0.2 icmp_seq=1 Destination Host Unreachable
Anyone who has had the same problem and actually solved it? I would really like to get this distribution up and running on my IBM X32 laptop. The simpleness and the philosophy behind it is very appealing to me. But without a wireless connection it is pretty pointless. Any pointer or help will be highly appreciated
Last edited by kitabu (2009-12-20 10:37:29)

Hi Ekimino,
I did as you suggested. I requested a dhcp lease and the router gave me 192.168.0.2. But I seems that I am losing connection immediately afterwards. When I ping an external address like www.google.com I get "unknown host" and when I ping my router I get the message that the destination host is unreachable. Perhaps the issue lies with dhcpcd or maybe a combination of the ath5k and dhcpcd?

Problem with unstable and slow SWFs

Good evening,
Some of my users are reporting problems with the SWF output of my intensive Captive file which includes significant software simulation. I knew that these files were going to be resource intensive due to the nature of the project, but I felt comfortable with system requirements of at least 2 gb RAM and a mid-range processor.
Unfortunately, some of my users who meet this criteria are reporting problems including text animations not playing in full and slow slide transitions. I cannot replicate this problem on any of my machines.
I have been playing around trying to compress images as much as possible and otherwise reduce file size. What else can be done? What are the top five things I can do to remedy this problem?
My presentation is about 50 slides and the SWF output is about 4.5 mb.
Thanks

I've seen this type of thing many times, especially in corporate environments.
My top suggestions:
If you've taken all reasonable steps to make your project as web-friendly as possible by this time, don't make any more changes to your project until you've exhausted the possibilities below. It is most likely NOT your project that is at fault.
Find out more details from the users that are complaining. If at all possible, actually go and sit with them to watch the behaviour they're talking about. Don't believe everything you hear.
Check that users are on the correct version of Flash Player. For example, Flash Player 10 can play significantly better than Flash 9.
Ask the user to check defragmentation on their PC. Most users DON'T know how to do this and never defragment. As a result, I have seen PCs in corporate IT environments that had not been defragmented in years. Their hard drive showed up mostly red when the fragmentation analysis was done. This lack of PC housekeeping can contribute to many issues, especially with Flash or multimedia playback. Ask the user to defragment 2 or 3 times to be on the safe side.
Watch the CPU on Task Manager while the PC is playing the Captivate presentation. The performance monitor should tell you if the CPU is struggling and unable to decode the content fast enough.
Try to have another user log onto the same machine using a different profile and see if they experience the same issues. This can tell you whether the issue is due to a corrupted user profile. Conversely, have the same user log onto a different machine, creating a new profile for themselves on that PC to see if they experience the same issue. If it seems to be their profile at fault, they may need to get some IT dude to blow away their profile and set it up afresh.
Check whether or not the issue could be due to server latency. This is especially the case where LMSs are involved. Users will often experience latency issues such as slow transitions from one quiz slide to the next because the course module has to wait for the LMS to respond before it can move forward. If this is occurring for a significant number of users, you can try using the optional SCORM template that only sends tracking data at the end of the module instead of all the way through.
In my experience, if 95% of your user base is playing the content without issue, you don't need to change anything. Chances are that whatever is going wrong for the few that are complaining about poor playback wouldn't necessarily improve no matter what you did to your project. In the vast majority of cases, you need to isolate what exactly is causing the issue for these users and correct it ON THEIR END.
Rod Ward
www.infosemantics.com.au
UPDATE: I just realised that a lot of this information would probably help others, so I created a blog post documenting these steps: http://www.infosemantics.com.au/debug_slow_playback

Problems with OPMN process (very unstable) on Windows Vista

I am running SOA on Windows Vista(V10.1.3.1). I am having the following problems with the OPMN process
 
1) Shuts down when idle
 
2) After crashing I try to restart SOA Suite using the command line>opmnctl startall
 
I get the error message..."Unable to Open Service with error Access is denied."
 
If I use the command line>opmnctl start
 I get the error message but OPMN process starts????
 
3) but then...Crashes when trying to Deploy a webservice through Application Server Control.
 
Anyone else having these sort of issues and have come across a fix?
 
regards
 
Paul P

I'm also having the same problem (on XP) on 10.1.3.4 I'm guessing this is a security issue but can anyone tell me how this can be resolved.
It appears to work fine as Admin but regular users without Admin rights have the above issue.

[Solved] Problem with upgrading polkit or filesystem

Ok so first off they do "upgrade" but the problem has me worried that something is wrong.
A week or so ago after converting to systemd I tried getting rid of ConsoleKit and installing polkit 0.107 from the [testing] repo but it caused pacman to get stuck at "(1/1) upgrading polkit" So I tried that a couple of times but I could never get pacman to finish and get past that. I had to control + c to get out of that then type exit in the console (no text was visible that I typed however but typing exit + enter worked for closing it). So I then opened a new terminal and downgraded polkit back to 0.105 and waited for polkit to get pushed from testing to see if it would fix my issue. Fast forward to today and I go to upgrade my system. Among the 83 updates or so was polkit and filesystem. What do you know it gets stuck at "(15/83) upgrading polkit". Fuck so I control + c, open new terminal and then do the upgrade again and it continues to update but this time it gets stuck doing the same thing for filesystem. I control + c, open new terminal and continue the upgrade until it finishes, which it does this time, and I reboot.
I tried re-installing polkit again and filesystem again but they continue to get stuck. I cannot "complete" the upgrade even though they show the appropriate version when I check.
Terminal
[507] shauder@arch-desktop [~] $ sudo pacman -S polkit
warning: polkit-0.107-4 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): polkit-0.107-4
Total Installed Size: 1.77 MiB
Net Upgrade Size: 0.00 MiB
Proceed with installation? [Y/n]
(1/1) checking package integrity [########################################################] 100%
(1/1) loading package files [########################################################] 100%
(1/1) checking for file conflicts [########################################################] 100%
(1/1) checking available disk space [########################################################] 100%
(1/1) upgrading polkit
/var/log/pacman.log
[2012-07-18 18:27] installed filesystem (2012.6-4)
[2012-07-18 18:27] installed findutils (4.4.2-4)
[2012-07-18 18:27] installed gawk (4.0.1-1)
[2012-07-18 18:27] installed gettext (0.18.1.1-4)
[2012-07-18 18:27] installed grep (2.13-2)
[2012-07-18 18:27] installed sed (4.2.1-4)
[2012-07-18 18:27] installed grub (0.97-21)
[2012-07-18 18:27] installed gzip (1.5-1)
[2012-07-18 18:27] installed gdbm (1.10-1)
[2012-07-18 18:27] installed perl (5.16.0-2)
[2012-07-18 18:27] installed openssl (1.0.1.c-1)
[2012-07-18 18:27] installed libsasl (2.1.23-9)
[2012-07-18 18:27] installed libldap (2.4.31-4)
[2012-07-18 18:27] installed keyutils (1.5.5-3)
[2012-07-18 18:27] installed krb5 (1.10.2-2)
[2012-07-18 18:27] installed heirloom-mailx (12.5-3)
[2012-07-18 18:27] installed inetutils (1.9.1-2)
[2012-07-18 18:27] installed iproute2 (3.4.0-2)
[2012-07-18 18:27] installed sysvinit (2.88-6)
[2012-07-18 18:27] installed initscripts (2012.06.3-2)
[2012-07-18 18:27] installed sysfsutils (2.1.0-8)
[2012-07-18 18:27] >> Traceroute is now provided by core/traceroute
[2012-07-18 18:27] installed iputils (20101006-4)
[2012-07-18 18:27] installed jfsutils (1.1.15-3)
[2012-07-18 18:27] installed less (444-3)
[2012-07-18 18:27] installed licenses (2.9-1)
[2012-07-18 18:27] installed linux-firmware (20120625-1)
[2012-07-18 18:27] installed mkinitcpio-busybox (1.20.1-1)
[2012-07-18 18:27] installed expat (2.1.0-1)
[2012-07-18 18:27] installed libarchive (3.0.4-1)
[2012-07-18 18:27] installed mkinitcpio (0.9.2-2)
[2012-07-18 18:27] >>> Updating module dependencies. Please wait ...
[2012-07-18 18:27] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2012-07-18 18:27] ==> Building image from preset: 'default'
[2012-07-18 18:27] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2012-07-18 18:27] ==> Starting build: 3.4.5-1-ARCH
[2012-07-18 18:27] -> Running build hook: [base]
[2012-07-18 18:27] -> Running build hook: [udev]
[2012-07-18 18:27] -> Running build hook: [autodetect]
[2012-07-18 18:27] -> Running build hook: [pata]
[2012-07-18 18:27] -> Running build hook: [scsi]
[2012-07-18 18:27] -> Running build hook: [sata]
[2012-07-18 18:27] -> Running build hook: [filesystems]
[2012-07-18 18:27] -> Running build hook: [usbinput]
[2012-07-18 18:27] -> Running build hook: [fsck]
[2012-07-18 18:27] ==> Generating module dependencies
[2012-07-18 18:27] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2012-07-18 18:27] bsdcpio: Failed to set default locale
[2012-07-18 18:27] ==> Image generation successful
[2012-07-18 18:27] ==> Building image from preset: 'fallback'
[2012-07-18 18:27] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2012-07-18 18:27] ==> Starting build: 3.4.5-1-ARCH
[2012-07-18 18:27] -> Running build hook: [base]
[2012-07-18 18:27] -> Running build hook: [udev]
[2012-07-18 18:27] -> Running build hook: [pata]
[2012-07-18 18:27] -> Running build hook: [scsi]
[2012-07-18 18:27] -> Running build hook: [sata]
[2012-07-18 18:27] -> Running build hook: [filesystems]
[2012-07-18 18:27] -> Running build hook: [usbinput]
[2012-07-18 18:27] -> Running build hook: [fsck]
[2012-07-18 18:27] ==> Generating module dependencies
[2012-07-18 18:27] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2012-07-18 18:27] bsdcpio: Failed to set default locale
[2012-07-18 18:27] ==> Image generation successful
[2012-07-18 18:27] installed linux (3.4.5-1)
[2012-07-18 18:27] installed logrotate (3.8.1-2)
[2012-07-18 18:27] installed lvm2 (2.02.96-3)
[2012-07-18 18:27] installed texinfo (4.13a-7)
[2012-07-18 18:27] installed groff (1.21-2)
[2012-07-18 18:27] installed libpipeline (1.2.1-1)
[2012-07-18 18:27] it's recommended to create an initial
[2012-07-18 18:27] database running as root:
[2012-07-18 18:27] "/usr/bin/mandb --quiet"
[2012-07-18 18:27] installed man-db (2.6.2-1)
[2012-07-18 18:27] installed man-pages (3.41-1)
[2012-07-18 18:27] installed mdadm (3.2.5-2)
[2012-07-18 18:27] installed nano (2.2.6-2)
[2012-07-18 18:27] installed ca-certificates (20120623-1)
[2012-07-18 18:27] installed libssh2 (1.4.2-1)
[2012-07-18 18:27] installed curl (7.26.0-1)
[2012-07-18 18:27] installed pth (2.0.7-4)
[2012-07-18 18:27] installed libksba (1.2.0-2)
[2012-07-18 18:27] installed libassuan (2.0.3-1)
[2012-07-18 18:27] installed pinentry (0.8.1-4)
[2012-07-18 18:27] installed dirmngr (1.1.0-4)
[2012-07-18 18:27] installed gnupg (2.0.19-2)
[2012-07-18 18:27] installed gpgme (1.3.1-4)
[2012-07-18 18:27] installed pacman-mirrorlist (20120626-1)
[2012-07-18 18:27] installed archlinux-keyring (20120622-1)
[2012-07-18 18:27] >>> Run `pacman-key --init; pacman-key --populate archlinux`
[2012-07-18 18:27] >>> to import the data required by pacman for package verification.
[2012-07-18 18:27] >>> See: https://www.archlinux.org/news/having-pacman-verify-packages
[2012-07-18 18:27] installed pacman (4.0.3-3)
[2012-07-18 18:27] installed pciutils (3.1.10-1)
[2012-07-18 18:27] installed pcmciautils (018-4)
[2012-07-18 18:27] installed libnl (3.2.11-1)
[2012-07-18 18:27] installed libusbx (1.0.12-2)
[2012-07-18 18:27] installed libpcap (1.3.0-1)
[2012-07-18 18:27] installed ppp (2.4.5-3)
[2012-07-18 18:27] installed procps-ng (3.3.3-3)
[2012-07-18 18:27] installed psmisc (22.19-1)
[2012-07-18 18:27] installed reiserfsprogs (3.6.21-4)
[2012-07-18 18:27] installed shadow (4.1.5.1-1)
[2012-07-18 18:27] installed eventlog (0.2.12-3)
[2012-07-18 18:27] installed syslog-ng (3.3.5-2)
[2012-07-18 18:27] installed tar (1.26-2)
[2012-07-18 18:27] installed usbutils (006-1)
[2012-07-18 18:27] installed vi (1:050325-2)
[2012-07-18 18:27] installed wget (1.13.4-1)
[2012-07-18 18:27] installed which (2.20-5)
[2012-07-18 18:27] installed dbus-core (1.6.2-2)
[2012-07-18 18:27] installed wpa_supplicant (1.0-1)
[2012-07-18 18:27] installed xfsprogs (3.1.8-2)
[2012-07-18 18:27] installed m4 (1.4.16-2)
[2012-07-18 18:27] installed autoconf (2.69-1)
[2012-07-18 18:27] installed automake (1.12.2-1)
[2012-07-18 18:27] installed binutils (2.22-9)
[2012-07-18 18:27] installed bison (2.5.1-1)
[2012-07-18 18:27] installed fakeroot (1.18.4-1)
[2012-07-18 18:27] installed flex (2.5.35-5)
[2012-07-18 18:27] installed mpfr (3.1.1-1)
[2012-07-18 18:27] installed libmpc (0.9-2)
[2012-07-18 18:27] installed isl (0.10-1)
[2012-07-18 18:27] installed cloog (0.17.0-2)
[2012-07-18 18:27] installed ppl (1.0-1)
[2012-07-18 18:27] installed gcc (4.7.1-4)
[2012-07-18 18:27] installed libltdl (2.4.2-6)
[2012-07-18 18:27] installed libtool (2.4.2-6)
[2012-07-18 18:27] installed make (3.82-4)
[2012-07-18 18:27] installed patch (2.6.1-3)
[2012-07-18 18:27] installed pkg-config (0.27-1)
[2012-07-18 18:37] Running 'pacman -Syy'
[2012-07-18 18:37] synchronizing package lists
[2012-07-18 18:38] Running 'pacman -Syy'
[2012-07-18 18:38] synchronizing package lists
[2012-07-18 18:39] Running 'pacman -S sudo'
[2012-07-18 18:43] Running 'pacman -S sudo'
[2012-07-18 18:44] Running 'pacman -S sudo'
[2012-07-18 18:44] installed sudo (1.8.5.p2-1)
[2012-07-18 18:45] Running 'pacman -S alsa-utils'
[2012-07-18 18:46] installed alsa-lib (1.0.25-1)
[2012-07-18 18:46] installed dialog (1.1_20120706-1)
[2012-07-18 18:46] installed libogg (1.3.0-1)
[2012-07-18 18:46] installed flac (1.2.1-3)
[2012-07-18 18:46] installed libvorbis (1.3.3-1)
[2012-07-18 18:46] installed libsndfile (1.0.25-2)
[2012-07-18 18:46] installed libsamplerate (0.1.8-1)
[2012-07-18 18:46] installed alsa-utils (1.0.25-3)
[2012-07-18 18:46] Running 'pacman -S alsa-plugins'
[2012-07-18 18:46] installed alsa-plugins (1.0.25-2)
[2012-07-18 18:48] Running 'pacman -S xorg-server xorg-xinit xorg-server-utils'
[2012-07-18 18:48] installed xproto (7.0.23-1)
[2012-07-18 18:48] installed libxdmcp (1.1.1-1)
[2012-07-18 18:48] installed freetype2 (2.4.10-1)
[2012-07-18 18:48] installed libfontenc (1.1.1-1)
[2012-07-18 18:48] installed fontsproto (2.1.2-1)
[2012-07-18 18:48] installed libxfont (1.4.5-1)
[2012-07-18 18:48] installed libpciaccess (0.13.1-1)
[2012-07-18 18:48] installed libdrm (2.4.37-1)
[2012-07-18 18:48] installed pixman (0.26.2-1)
[2012-07-18 18:48] installed libxau (1.0.7-1)
[2012-07-18 18:48] installed xcb-proto (1.7.1-1)
[2012-07-18 18:48] installed libxcb (1.8.1-1)
[2012-07-18 18:48] installed kbproto (1.0.6-1)
[2012-07-18 18:48] installed libx11 (1.5.0-1)
[2012-07-18 18:48] installed libxkbfile (1.0.8-1)
[2012-07-18 18:48] installed xorg-xkbcomp (1.2.4-1)
[2012-07-18 18:48] installed xkeyboard-config (2.6-1)
[2012-07-18 18:48] installed xorg-setxkbmap (1.3.0-1)
[2012-07-18 18:48] installed xorg-fonts-encodings (1.0.4-3)
[2012-07-18 18:48] installed xorg-fonts-alias (1.0.2-2)
[2012-07-18 18:48] installed xorg-bdftopcf (1.0.3-2)
[2012-07-18 18:48] installed xorg-mkfontscale (1.1.0-1)
[2012-07-18 18:48] installed xorg-mkfontdir (1.0.7-1)
[2012-07-18 18:48] installed xorg-font-util (1.3.0-1)
[2012-07-18 18:48] installed xorg-font-utils (7.6-3)
[2012-07-18 18:48] updating font cache... done.
[2012-07-18 18:48] installed fontconfig (2.8.0-2)
[2012-07-18 18:49] Updating font cache... done.
[2012-07-18 18:49] installed xorg-fonts-misc (1.0.1-2)
[2012-07-18 18:49] installed xorg-server-common (1.12.3-1)
[2012-07-18 18:49] installed xf86-input-evdev (2.7.0-2)
[2012-07-18 18:49] installed xorg-server (1.12.3-1)
[2012-07-18 18:49] installed xextproto (7.2.1-1)
[2012-07-18 18:49] installed libxext (1.3.1-1)
[2012-07-18 18:49] installed libice (1.0.8-1)
[2012-07-18 18:49] installed libsm (1.2.1-1)
[2012-07-18 18:49] installed libxt (1.1.3-1)
[2012-07-18 18:49] installed libxmu (1.1.1-1)
[2012-07-18 18:49] installed xorg-xauth (1.0.7-1)
[2012-07-18 18:49] installed xorg-xinit (1.3.2-1)
[2012-07-18 18:49] installed xorg-iceauth (1.0.5-1)
[2012-07-18 18:49] installed xorg-sessreg (1.0.7-1)
[2012-07-18 18:49] installed xorg-xcmsdb (1.0.4-1)
[2012-07-18 18:49] installed renderproto (0.11.1-2)
[2012-07-18 18:49] installed libxrender (0.9.7-1)
[2012-07-18 18:49] installed randrproto (1.3.2-2)
[2012-07-18 18:49] installed libxrandr (1.3.2-2)
[2012-07-18 18:49] installed xorg-xbacklight (1.1.2-3)
[2012-07-18 18:49] installed xf86vidmodeproto (2.3.1-2)
[2012-07-18 18:49] installed libxxf86vm (1.1.2-1)
[2012-07-18 18:49] installed xorg-xgamma (1.0.5-1)
[2012-07-18 18:49] installed xorg-xhost (1.0.5-1)
[2012-07-18 18:49] installed xorg-xrandr (1.3.5-1)
[2012-07-18 18:49] installed inputproto (2.2-1)
[2012-07-18 18:49] installed libxi (1.6.1-1)
[2012-07-18 18:49] installed xineramaproto (1.2.1-2)
[2012-07-18 18:49] installed libxinerama (1.1.2-1)
[2012-07-18 18:49] installed xorg-xinput (1.6.0-1)
[2012-07-18 18:49] installed xorg-xmodmap (1.0.7-1)
[2012-07-18 18:49] installed mcpp (2.7.2-4)
[2012-07-18 18:49] installed xorg-xrdb (1.0.9-2)
[2012-07-18 18:49] installed xorg-xrefresh (1.0.4-3)
[2012-07-18 18:49] installed xorg-xset (1.2.2-1)
[2012-07-18 18:49] installed fixesproto (5.0-2)
[2012-07-18 18:49] installed libxfixes (5.0-2)
[2012-07-18 18:49] installed libxcursor (1.1.13-1)
[2012-07-18 18:49] installed xorg-xsetroot (1.1.0-3)
[2012-07-18 18:49] installed xorg-server-utils (7.6-3)
[2012-07-18 18:50] Running 'pacman -S nvidia nvidia-utils'
[2012-07-18 18:50] Running 'pacman -S nvidia nvidia-utils lib32-nvidia-utils'
[2012-07-18 18:51] installed videoproto (2.3.1-2)
[2012-07-18 18:51] installed libxv (1.0.7-1)
[2012-07-18 18:51] installed libxvmc (1.0.7-1)
[2012-07-18 18:51] installed nvidia-utils (302.17-1)
[2012-07-18 18:51] In order to use nvidia module, reboot the system.
[2012-07-18 18:51] installed nvidia (302.17-3)
[2012-07-18 18:51] installed lib32-glibc (2.16.0-2)
[2012-07-18 18:51] installed lib32-libxdmcp (1.1.1-1)
[2012-07-18 18:51] installed lib32-libxau (1.0.7-1)
[2012-07-18 18:51] installed lib32-libxcb (1.8.1-2)
[2012-07-18 18:51] installed lib32-libx11 (1.5.0-1)
[2012-07-18 18:51] installed lib32-libxext (1.3.1-1)
[2012-07-18 18:51] installed lib32-libxv (1.0.7-1)
[2012-07-18 18:51] installed lib32-libxvmc (1.0.7-1)
[2012-07-18 18:51] installed lib32-zlib (1.2.7-1)
[2012-07-18 18:51] installed lib32-gcc-libs (4.7.1-4.1)
[2012-07-18 18:51] installed lib32-nvidia-utils (302.17-1)
[2012-07-18 18:55] Running 'pacman -S xorg-twm xorg-xclock xterm'
[2012-07-18 18:55] installed xorg-twm (1.0.7-1)
[2012-07-18 18:55] installed libxpm (3.5.10-1)
[2012-07-18 18:55] installed libxaw (1.0.11-1)
[2012-07-18 18:55] installed libxft (2.3.1-1)
[2012-07-18 18:55] installed xorg-xclock (1.0.6-1)
[2012-07-18 18:55] installed xorg-luit (1.1.1-1)
[2012-07-18 18:55] installed xbitmaps (1.1.1-2)
[2012-07-18 18:55] installed xterm (281-1)
[2012-07-18 18:55] Running 'pacman -S dbus'
[2012-07-18 18:55] installed dbus (1.6.2-1)
[2012-07-18 18:56] Running 'pacman -S ttf-dejavu'
[2012-07-18 18:56] installed ttf-dejavu (2.33-3)
[2012-07-18 18:57] Running 'pacman -S awesome'
[2012-07-18 18:57] installed libpng (1.5.11-1)
[2012-07-18 18:57] installed cairo (1.12.2-2)
[2012-07-18 18:57] installed libjpeg-turbo (1.2.1-1)
[2012-07-18 18:57] installed libtiff (4.0.2-1)
[2012-07-18 18:57] installed giflib (4.1.6-5)
[2012-07-18 18:57] installed libid3tag (0.15.1b-7)
[2012-07-18 18:57] installed imlib2 (1.4.5-2)
[2012-07-18 18:57] installed libev (4.11-1)
[2012-07-18 18:57] installed libxdg-basedir (1.2.0-1)
[2012-07-18 18:57] installed lua (5.1.5-2)
[2012-07-18 18:57] installed libdatrie (0.2.5-1)
[2012-07-18 18:57] installed libthai (0.1.17-1)
[2012-07-18 18:57] installed pango (1.30.1-1)
[2012-07-18 18:57] installed xcb-util (0.3.9-1)
[2012-07-18 18:57] installed startup-notification (0.12-3)
[2012-07-18 18:57] installed xcb-util-image (0.3.9-1)
[2012-07-18 18:57] installed xcb-util-keysyms (0.3.9-1)
[2012-07-18 18:57] installed xcb-util-wm (0.3.9-1)
[2012-07-18 18:57] installed xorg-xmessage (1.0.3-2)
[2012-07-18 18:57] installed awesome (3.4.13-1)
[2012-07-18 18:58] Running 'pacman -S rlwrap feh'
[2012-07-18 18:58] installed rlwrap (0.37-2)
[2012-07-18 18:58] installed giblib (1.2.4-5)
[2012-07-18 18:58] installed libexif (0.6.20-2)
[2012-07-18 18:58] installed feh (2.5-1)
[2012-07-18 18:59] Running 'pacman -S packer'
[2012-07-18 18:59] Running 'pacman -S lightdm'
[2012-07-18 19:01] Running 'pacman -S fakeroot'
[2012-07-18 19:01] upgraded fakeroot (1.18.4-1 -> 1.18.4-1)
[2012-07-18 19:08] Running 'pacman -S git'
[2012-07-18 19:08] installed perl-error (0.17018-1)
[2012-07-18 19:08] installed git (1.7.11.2-1)
[2012-07-18 19:08] Running 'pacman -S jshon'
[2012-07-18 19:08] installed jansson (2.3-1)
[2012-07-18 19:08] installed jshon (20111222-1)
[2012-07-18 19:08] Running 'pacman -U packer-20120718-1-any.pkg.tar.xz'
[2012-07-18 19:08] installed packer (20120718-1)
[2012-07-18 19:10] Running 'pacman --noconfirm --asdeps -S -- accountsservice dbus-glib gobject-introspection intltool itstool libxklavier'
[2012-07-18 19:10] installed polkit (0.105-1)
[2012-07-18 19:10] installed accountsservice (0.6.22-1)
[2012-07-18 19:10] installed dbus-glib (0.100-1)
[2012-07-18 19:10] installed sqlite (3.7.13-1)
[2012-07-18 19:10] installed python2 (2.7.3-2)
[2012-07-18 19:10] installed gobject-introspection (1.32.1-2)
[2012-07-18 19:10] installed perl-xml-parser (2.41-3)
[2012-07-18 19:10] installed intltool (0.50.2-1)
[2012-07-18 19:10] installed libxml2 (2.7.8-2)
[2012-07-18 19:10] installed itstool (1.1.2-1)
[2012-07-18 19:10] installed iso-codes (3.34-1)
[2012-07-18 19:10] installed libxklavier (5.2.1-2)
[2012-07-18 19:13] Running 'pacman -U lightdm-1.3.1-4-x86_64.pkg.tar.xz'
[2012-07-18 19:14] You need to install lightdm-gtk-greeter to run the default and most stable greeter
[2012-07-18 19:14] installed lightdm (1.3.1-4)
[2012-07-18 19:14] Running 'pacman --noconfirm --asdeps -S -- archlinux-wallpaper bzr gnome-common gnome-doc-utils gtk-doc gtk-engines libwebkit vala'
[2012-07-18 19:15] ==> Wallpapers have been installed to /usr/share/archlinux/wallpaper
[2012-07-18 19:15] installed archlinux-wallpaper (1.4-1)
[2012-07-18 19:15] installed bzr (2.5.1-1)
[2012-07-18 19:15] installed gnome-common (3.4.0.1-2)
[2012-07-18 19:15] installed libxslt (1.1.26-3)
[2012-07-18 19:15] installed docbook-xml (4.5-5)
[2012-07-18 19:15] installed rarian (0.8.1-2)
[2012-07-18 19:15] installed gnome-doc-utils (0.20.10-1)
[2012-07-18 19:15] installed docbook-xsl (1.77.1-2)
[2012-07-18 19:15] installed gtk-doc (1.18-1)
[2012-07-18 19:15] installed atk (2.4.0-1)
[2012-07-18 19:15] installed compositeproto (0.4.2-2)
[2012-07-18 19:15] installed libxcomposite (0.4.3-2)
[2012-07-18 19:15] installed damageproto (1.2.1-2)
[2012-07-18 19:15] installed libxdamage (1.1.3-2)
[2012-07-18 19:15] installed shared-mime-info (1.0-1)
[2012-07-18 19:15] installed libtasn1 (2.13-1)
[2012-07-18 19:15] installed nettle (2.5-1)
[2012-07-18 19:15] installed p11-kit (0.12-1)
[2012-07-18 19:15] installed gnutls (3.0.21-1)
[2012-07-18 19:15] installed libdaemon (0.14-2)
[2012-07-18 19:15] ==> The following daemons may be added to DAEMONS in /etc/rc.conf:
[2012-07-18 19:15] ==> avahi-daemon: the mdns responder, you probably want this.
[2012-07-18 19:15] ==> dbus needs to be running when you start it.
[2012-07-18 19:15] ==> avahi-dnsconfd: daemon used for peer-to-peer automatic dns
[2012-07-18 19:15] ==> configuration on dhcp-less networks.
[2012-07-18 19:15]
[2012-07-18 19:15] ==> To use some of the client applications you will have to install python.
[2012-07-18 19:15] ==> In addition, pygtk is required for the graphical ones and
[2012-07-18 19:15] ==> twisted for avahi-bookmarks.
[2012-07-18 19:15] installed avahi (0.6.31-3)
[2012-07-18 19:15] installed libcups (1.5.3-5)
[2012-07-18 19:15] installed gdk-pixbuf2 (2.26.1-1)
[2012-07-18 19:15] installed gtk-update-icon-cache (2.24.10-3)
[2012-07-18 19:15] installed gtk2 (2.24.10-3)
[2012-07-18 19:15] installed gtk-engines (2.21.0-1)
[2012-07-18 19:15] installed icu (49.1.2-1)
[2012-07-18 19:15] installed gstreamer0.10 (0.10.36-1)
[2012-07-18 19:15] installed orc (0.4.16-1)
[2012-07-18 19:15] installed gstreamer0.10-base (0.10.36-1)
[2012-07-18 19:15] installed libproxy (0.4.7-2)
[2012-07-18 19:15] installed gsettings-desktop-schemas (3.4.2-1)
[2012-07-18 19:15] installed glib-networking (2.32.3-1)
[2012-07-18 19:15] installed libsoup (2.38.1-1)
[2012-07-18 19:15] ==> aspell comes with no default dictionary
[2012-07-18 19:15] installed aspell (0.60.6.1-1)
[2012-07-18 19:15] installed hunspell (1.3.2-1)
[2012-07-18 19:15] installed hspell (1.1-2)
[2012-07-18 19:15] installed enchant (1.6.0-4)
[2012-07-18 19:15] installed geoclue (0.12.0-5)
[2012-07-18 19:15] installed libwebkit (1.8.1-1)
[2012-07-18 19:15] installed vala (0.16.1-1)
[2012-07-18 19:16] Running 'pacman -U lightdm-webkit-greeter-bzr-13-3-x86_64.pkg.tar.xz'
[2012-07-18 19:16] Running 'pacman -U lightdm-webkit-greeter-0.1.2-3-x86_64.pkg.tar.xz'
[2012-07-18 19:16] installed lightdm-webkit-greeter (0.1.2-3)
[2012-07-18 19:47] Running 'pacman -R lightdm'
[2012-07-18 19:48] Running 'pacman -R lightdm-webkit-greeter lightdm accountsservice dbus-glib libxklavier'
[2012-07-18 19:48] Running 'pacman -R lightdm-webkit-greeter lightdm accountsservice enchant geoclue dbus-glib libxklavier'
[2012-07-18 19:48] Running 'pacman -R lightdm-webkit-greeter lightdm accountsservice libwebkite enchant geoclue dbus-glib libxklavier'
[2012-07-18 19:48] Running 'pacman -R lightdm-webkit-greeter lightdm accountsservice libwebkit enchant geoclue dbus-glib libxklavier'
[2012-07-18 19:49] removed lightdm-webkit-greeter (0.1.2-3)
[2012-07-18 19:49] removed libwebkit (1.8.1-1)
[2012-07-18 19:49] removed geoclue (0.12.0-5)
[2012-07-18 19:49] removed enchant (1.6.0-4)
[2012-07-18 19:49] userdel: user lightdm is currently used by process 657
[2012-07-18 19:49] groupdel: cannot remove the primary group of user 'lightdm'
[2012-07-18 19:49] removed lightdm (1.3.1-4)
[2012-07-18 19:49] removed libxklavier (5.2.1-2)
[2012-07-18 19:49] removed dbus-glib (0.100-1)
[2012-07-18 19:49] removed accountsservice (0.6.22-1)
[2012-07-18 19:50] Running 'pacman -S chromium'
[2012-07-18 19:50] installed dbus-glib (0.100-1)
[2012-07-18 19:50] installed nspr (4.9.1-1)
[2012-07-18 19:50] installed nss (3.13.5-1)
[2012-07-18 19:50] installed xdg-utils (1.1.0-2.20120520)
[2012-07-18 19:50] installed libevent (2.0.19-1)
[2012-07-18 19:50] installed scrnsaverproto (1.2.2-1)
[2012-07-18 19:50] installed libxss (1.2.2-1)
[2012-07-18 19:50] installed desktop-file-utils (0.20-1)
[2012-07-18 19:50] installed hicolor-icon-theme (0.12-2)
[2012-07-18 19:50] installed chromium (20.0.1132.57-1)
[2012-07-18 19:50] Running 'pacman -Sy abs'
[2012-07-18 19:50] synchronizing package lists
[2012-07-18 19:51] installed rsync (3.0.9-3)
[2012-07-18 19:51] installed abs (2.4.3-2)
[2012-07-18 19:52] Running 'pacman -S openjdk6 perl git gnupg flex bison gperf zip unzip wxgtk squashfs-tools ncurses libpng zlib libusb libusb-compat readline'
[2012-07-18 19:53] installed ca-certificates-java (20120608-1)
[2012-07-18 19:53] installed recordproto (1.14.2-1)
[2012-07-18 19:53] installed libxtst (1.2.1-1)
[2012-07-18 19:53] upgraded zlib (1.2.7-1 -> 1.2.7-1)
[2012-07-18 19:53] upgraded libpng (1.5.11-1 -> 1.5.11-1)
[2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/NetLock_Arany_=Class_Gold=_F?tan?s?tv?ny.pem. Message:
[2012-07-18 19:53] /etc/ssl/certs/NetLock_Arany_=Class_Gold=_F?tan?s?tv?ny.pem (No such file or directory)
[2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/AC_Ra?z_Certic?mara_S.A..pem. Message:
[2012-07-18 19:53] /etc/ssl/certs/AC_Ra?z_Certic?mara_S.A..pem (No such file or directory)
[2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/Certinomis_-_Autorit?_Racine.pem. Message:
[2012-07-18 19:53] /etc/ssl/certs/Certinomis_-_Autorit?_Racine.pem (No such file or directory)
[2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/T?B?TAK_UEKAE_K?k_Sertifika_Hizmet_Sa?lay?c?s?_-_S?r?m_3.pem. Message:
[2012-07-18 19:53] /etc/ssl/certs/T?B?TAK_UEKAE_K?k_Sertifika_Hizmet_Sa?lay?c?s?_-_S?r?m_3.pem (No such file or directory)
[2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/EBG_Elektronik_Sertifika_Hizmet_Sa?lay?c?s?.pem. Message:
[2012-07-18 19:53] /etc/ssl/certs/EBG_Elektronik_Sertifika_Hizmet_Sa?lay?c?s?.pem (No such file or directory)
[2012-07-18 19:53] done.
[2012-07-18 19:53] when you use a non-reparenting window manager
[2012-07-18 19:53] set _JAVA_AWT_WM_NONREPARENTING=1 in
[2012-07-18 19:53] /etc/profile.d/openjdk6.sh
[2012-07-18 19:53] installed openjdk6 (6.b24_1.11.3-1)
[2012-07-18 19:53] upgraded perl (5.16.0-2 -> 5.16.0-2)
[2012-07-18 19:53] upgraded git (1.7.11.2-1 -> 1.7.11.2-1)
[2012-07-18 19:53] upgraded ncurses (5.9-3 -> 5.9-3)
[2012-07-18 19:53] upgraded readline (6.2.003-2 -> 6.2.003-2)
[2012-07-18 19:53] upgraded gnupg (2.0.19-2 -> 2.0.19-2)
[2012-07-18 19:53] upgraded flex (2.5.35-5 -> 2.5.35-5)
[2012-07-18 19:53] upgraded bison (2.5.1-1 -> 2.5.1-1)
[2012-07-18 19:53] installed gperf (3.0.4-4)
[2012-07-18 19:53] installed zip (3.0-3)
[2012-07-18 19:53] installed unzip (6.0-6)
[2012-07-18 19:53] installed wxgtk (2.8.12.1-3)
[2012-07-18 19:53] installed lzo2 (2.06-1)
[2012-07-18 19:53] installed squashfs-tools (4.2-2)
[2012-07-18 19:53] upgraded libusbx (1.0.12-2 -> 1.0.12-2)
[2012-07-18 19:53] installed libusb-compat (0.1.4-2)
[2012-07-18 19:53] Running 'pacman -S -- esdl schedtool'
[2012-07-18 19:54] installed erlang (R15B01-1)
[2012-07-18 19:54] installed sdl (1.2.15-1)
[2012-07-18 19:54] installed dri2proto (2.6-1)
[2012-07-18 19:54] installed glproto (1.4.15-1)
[2012-07-18 19:54] installed mesa (8.0.4-1)
[2012-07-18 19:54] installed esdl (2:1.2-1)
[2012-07-18 19:54] installed schedtool (1.3.0-2)
[2012-07-18 19:55] Running 'pacman -U pngcrush-1.7.31-1-x86_64.pkg.tar.xz'
[2012-07-18 19:55] installed pngcrush (1.7.31-1)
[2012-07-18 19:55] Running 'pacman -U repo-1.17-1-x86_64.pkg.tar.xz'
[2012-07-18 19:55] installed repo (1.17-1)
[2012-07-18 19:59] Running 'pacman -S terminator'
[2012-07-18 19:59] installed vte-common (0.32.2-1)
[2012-07-18 19:59] installed vte (0.28.2-3)
[2012-07-18 19:59] installed libglade (2.6.4-3)
[2012-07-18 19:59] installed python2-cairo (1.10.0-1)
[2012-07-18 19:59] installed pygobject2-devel (2.28.6-6)
[2012-07-18 19:59] installed python2-gobject2 (2.28.6-6)
[2012-07-18 19:59] installed pygtk (2.24.0-3)
[2012-07-18 19:59] installed terminator (0.96-1)
[2012-07-18 20:00] Running 'pacman -Sy gcc-multilib gcc-libs-multilib binutils-multilib libtool-multilib lib32-libusb lib32-libusb-compat lib32-readline lib32-glibc lib32-zlib'
[2012-07-18 20:00] synchronizing package lists
[2012-07-18 20:00] Running 'pacman -Sy gcc-multilib gcc-libs-multilib binutils-multilib libtool-multilib lib32-libusb-compat lib32-readline lib32-glibc lib32-zlib'
[2012-07-18 20:00] synchronizing package lists
[2012-07-18 20:00] Running 'pacman -Sy gcc-multilib gcc-libs-multilib binutils-multilib libtool-multilib lib32-readline lib32-glibc lib32-zlib'
[2012-07-18 20:00] synchronizing package lists
[2012-07-18 20:01] removed gcc-libs (4.7.1-4)
[2012-07-18 20:01] removed binutils (2.22-9)
[2012-07-18 20:01] removed gcc (4.7.1-4)
[2012-07-18 20:01] removed libtool (2.4.2-6)
[2012-07-18 20:01] installed gcc-libs-multilib (4.7.1-4.1)
[2012-07-18 20:01] installed binutils-multilib (2.22-8)
[2012-07-18 20:01] installed gcc-multilib (4.7.1-4.1)
[2012-07-18 20:01] upgraded lib32-glibc (2.16.0-2 -> 2.16.0-2)
[2012-07-18 20:01] installed lib32-libltdl (2.4.2-6)
[2012-07-18 20:01] installed libtool-multilib (2.4.2-6)
[2012-07-18 20:01] installed lib32-ncurses (5.9-1)
[2012-07-18 20:01] installed lib32-readline (6.2.003-1)
[2012-07-18 20:01] upgraded lib32-zlib (1.2.7-1 -> 1.2.7-1)
[2012-07-18 20:07] Running 'pacman -S ssh'
[2012-07-18 20:10] Running 'pacman -S ssh-keygen'
[2012-07-18 20:10] Running 'pacman -S openssh'
[2012-07-18 20:10] installed libedit (20120311_3.0-1)
[2012-07-18 20:10] installed dnssec-anchors (20120422-1)
[2012-07-18 20:10] installed ldns (1.6.13-1)
[2012-07-18 20:10] installed openssh (6.0p1-3)
[2012-07-18 20:11] Running 'pacman -S pbcopy'
[2012-07-18 20:11] Running 'pacman -S copy'
[2012-07-18 20:13] Running 'pacman -S gedit'
[2012-07-18 20:13] installed lcms2 (2.3-2)
[2012-07-18 20:13] installed libgusb (0.1.3-1)
[2012-07-18 20:13] installed gd (2.0.36RC1-5)
[2012-07-18 20:13] installed libgphoto2 (2.4.14-1)
[2012-07-18 20:13] installed libieee1284 (0.2.11-4)
[2012-07-18 20:13] installed v4l-utils (0.8.8-1)
[2012-07-18 20:13] installed net-snmp (5.7.1-3)
[2012-07-18 20:13] NOTE
[2012-07-18 20:13] ----
[2012-07-18 20:13] Add your user to group 'scanner' to use scanner devices.
[2012-07-18 20:13] installed sane (1.0.22-9)
[2012-07-18 20:13] installed shared-color-profiles (0.1.5-1)
[2012-07-18 20:13] installed colord (0.1.21-2)
[2012-07-18 20:13] installed gtk3 (3.4.3-1)
[2012-07-18 20:13] installed gtksourceview3 (3.4.2-1)
[2012-07-18 20:13] installed libpeas (1.4.0-2)
[2012-07-18 20:13] installed enchant (1.6.0-4)
[2012-07-18 20:13] installed pygobject-devel (3.2.2-1)
[2012-07-18 20:13] installed python2-gobject (3.2.2-1)
[2012-07-18 20:13] installed dconf (0.12.1-2)
[2012-07-18 20:13] installed gedit (3.4.2-1)
[2012-07-18 20:15] Running 'pacman -S python'
[2012-07-18 20:16] installed python (3.2.3-3)
[2012-07-18 20:26] Running 'pacman -S xclip'
[2012-07-18 20:26] installed xclip (0.12-3)
[2012-07-18 20:37] Running 'pacman --noconfirm --asdeps -S -- lib32-alsa-lib lib32-libstdc++5 lib32-openal lib32-sdl swt'
[2012-07-18 20:37] installed lib32-alsa-lib (1.0.25-1)
[2012-07-18 20:37] installed lib32-libstdc++5 (3.3.6-6)
[2012-07-18 20:37] installed openal (1.14-1)
[2012-07-18 20:37] installed lib32-openal (1.14-1)
[2012-07-18 20:37] installed lib32-libxrender (0.9.7-1)
[2012-07-18 20:37] installed lib32-sdl (1.2.15-2)
[2012-07-18 20:37] installed swt (3.7.2-1)
[2012-07-18 20:45] Running 'pacman --asdeps -U android-sdk-r20-2-x86_64.pkg.tar.xz'
[2012-07-18 20:50] You need to source /etc/profile or relogin to add the Android SDK tools to your path.
[2012-07-18 20:50] The android group has been removed, install android packages as root.
[2012-07-18 20:50] installed android-sdk (r20-2)
[2012-07-18 20:51] Running 'pacman -U android-sdk-r20-2-x86_64.pkg.tar.xz'
[2012-07-18 20:54] You need to source /etc/profile or relogin to add the Android SDK tools to your path.
[2012-07-18 20:54] The android group has been removed, install android packages as root.
[2012-07-18 20:54] upgraded android-sdk (r20-2 -> r20-2)
[2012-07-18 20:59] Running 'pacman -U android-sdk-platform-tools-r12-1-any.pkg.tar.xz'
[2012-07-18 20:59] installed android-sdk-platform-tools (r12-1)
[2012-07-18 21:10] Running 'pacman -S perl-switch'
[2012-07-18 21:10] installed perl-switch (2.16-1)
[2012-07-21 03:29] Running 'pacman -S flashplugin'
[2012-07-21 03:29] relogin or source /etc/profile.d/mozilla-common.sh
[2012-07-21 03:29] installed mozilla-common (1.4-3)
[2012-07-21 03:29] >>
[2012-07-21 03:29] >> If you have an NVIDIA card that supports libvdpau or Broadcom Crystal HD chips,
[2012-07-21 03:29] >> uncomment EnableLinuxHWVideoDecode=1 from /etc/adobe/mms.cfg.
[2012-07-21 03:29] >> If you run into problems, please contact nVidia or Broadcom along with your system config info / driver version.
[2012-07-21 03:29] >>
[2012-07-21 03:29] installed flashplugin (11.2.202.236-1)
[2012-07-21 03:32] Running 'pacman -S libvdpau'
[2012-07-21 03:32] installed libvdpau (0.4.1-2)
[2012-07-21 14:53] Running 'pacman -S gedit-common'
[2012-07-21 14:55] Running 'pacman -S gtk-theme-switch2'
[2012-07-21 14:56] installed gtk-theme-switch2 (2.1.0-2)
[2012-07-21 15:00] Running 'pacman -S gtk-icons'
[2012-07-21 15:04] Running 'pacman -R gtk-theme-switch2 gedit dconf desktop-file-utils enchant gsettings-desktop-schemas gtksourceview3 iso-codes libpeas libsm python2-gobject'
[2012-07-21 15:06] Running 'pacman -R gtk-theme-switch2 gedit dconf enchant gtksourceview3 iso-codes libpeas python2-gobject'
[2012-07-21 15:06] removed gedit (3.4.2-1)
[2012-07-21 15:06] removed python2-gobject (3.2.2-1)
[2012-07-21 15:06] removed libpeas (1.4.0-2)
[2012-07-21 15:06] removed iso-codes (3.34-1)
[2012-07-21 15:06] removed gtksourceview3 (3.4.2-1)
[2012-07-21 15:06] removed enchant (1.6.0-4)
[2012-07-21 15:06] removed dconf (0.12.1-2)
[2012-07-21 15:06] removed gtk-theme-switch2 (2.1.0-2)
[2012-07-21 15:06] Running 'pacman -R glib-networking gsettings-desktop-schemas'
[2012-07-21 15:06] Running 'pacman -R libsoup glib-networking gsettings-desktop-schemas'
[2012-07-21 15:06] removed libsoup (2.38.1-1)
[2012-07-21 15:06] removed glib-networking (2.32.3-1)
[2012-07-21 15:06] removed gsettings-desktop-schemas (3.4.2-1)
[2012-07-21 15:07] Running 'pacman -R wxgtk'
[2012-07-21 15:07] removed wxgtk (2.8.12.1-3)
[2012-07-21 15:07] Running 'pacman -R libxt libsm'
[2012-07-21 15:11] Running 'pacman -S ranger'
[2012-07-21 15:11] installed ranger (1.5.4-1)
[2012-07-21 15:32] Running 'pacman -S irssi'
[2012-07-21 15:32] installed irssi (0.8.15-6)
[2012-07-24 20:20] Running 'pacman -U sublime-text-2.0.1-1-x86_64.pkg.tar.xz'
[2012-07-24 20:20] installed sublime-text (2.0.1-1)
[2012-07-24 23:41] Running 'pacman -U dropbox-1.4.11-1-x86_64.pkg.tar.xz'
[2012-07-24 23:41] installed dropbox (1.4.11-1)
[2012-07-24 23:41] Running 'pacman -U dropbox-daemon-0.8-8-any.pkg.tar.xz'
[2012-07-24 23:41] >> Configure the Dropbox daemon script by editing /etc/conf.d/dropboxd.conf
[2012-07-24 23:41] installed dropbox-daemon (0.8-8)
[2012-07-24 23:48] Running 'pacman -U dropbox-cli-1-12-x86_64.pkg.tar.xz'
[2012-07-24 23:48] installed dropbox-cli (1-12)
[2012-07-24 23:49] Running 'pacman -S nautilus'
[2012-07-24 23:56] Running 'pacman -S ranger'
[2012-07-24 23:57] upgraded ranger (1.5.4-1 -> 1.5.4-1)
[2012-07-25 00:23] Running 'pacman --noconfirm --asdeps -S -- gconf qt qtwebkit'
[2012-07-25 00:23] Running 'pacman --noconfirm --asdeps -S -- gconf qt qtwebkit'
[2012-07-25 00:23] Running 'pacman -Sy'
[2012-07-25 00:23] synchronizing package lists
[2012-07-25 00:24] Running 'pacman --noconfirm --asdeps -S -- gconf qt qtwebkit'
[2012-07-25 00:25] installed gconf (3.2.5-2)
[2012-07-25 00:25] installed libmng (1.0.10-4)
[2012-07-25 00:25] installed qt (4.8.2-3)
[2012-07-25 00:25] installed qtwebkit (2.2.2-1)
[2012-07-25 00:27] Running 'pacman --asdeps -U openssl098-0.9.8.x-1-x86_64.pkg.tar.xz'
[2012-07-25 00:27] installed openssl098 (0.9.8.x-1)
[2012-07-25 00:28] Running 'pacman --asdeps -U libpng12-1.2.49-1-x86_64.pkg.tar.xz'
[2012-07-25 00:28] installed libpng12 (1.2.49-1)
[2012-07-25 00:30] Running 'pacman -U spotify-0.8.4.103-1-x86_64.pkg.tar.xz'
[2012-07-25 00:31] installed spotify (0.8.4.103-1)
[2012-07-29 16:57] Running 'pacman --noconfirm --asdeps -S -- ffmpeg libmediainfo mencoder mplayer'
[2012-07-29 16:58] Running 'pacman --noconfirm --asdeps -S -- ffmpeg libmediainfo mencoder mplayer'
[2012-07-29 16:58] Running 'pacman -Syy'
[2012-07-29 16:58] synchronizing package lists
[2012-07-29 17:00] Running 'pacman --noconfirm --asdeps -S -- ffmpeg libmediainfo mencoder mplayer'
[2012-07-29 17:00] installed gsm (1.0.13-7)
[2012-07-29 17:00] installed lame (3.99.5-1)
[2012-07-29 17:00] installed libasyncns (0.8-4)
[2012-07-29 17:00] installed json-c (0.9-1)
[2012-07-29 17:00] installed libpulse (2.1-1)
[2012-07-29 17:00] installed libtheora (1.1.1-2)
[2012-07-29 17:00] installed libglapi (8.0.4-2)
[2012-07-29 17:00] installed khrplatform-devel (8.0.4-2)
[2012-07-29 17:00] installed libegl (8.0.4-2)
[2012-07-29 17:00] installed libva (1.1.0-1)
[2012-07-29 17:00] installed libvpx (1.1.0-1)
[2012-07-29 17:00] installed opencore-amr (0.1.3-1)
[2012-07-29 17:00] installed openjpeg (1.5.0-1)
[2012-07-29 17:00] installed rtmpdump (2.4-1)
[2012-07-29 17:00] installed schroedinger (1.0.11-1)
[2012-07-29 17:00] installed speex (1.2rc1-2)
[2012-07-29 17:00] installed x264 (20120705-1)
[2012-07-29 17:00] installed xvidcore (1.3.2-1)
[2012-07-29 17:00] installed ffmpeg (1:0.11.1-1)
[2012-07-29 17:00] installed libmms (0.6.2-1)
[2012-07-29 17:00] installed libzen (0.4.26-1)
[2012-07-29 17:00] installed libmediainfo (0.7.58-1)
[2012-07-29 17:00] installed recode (3.6-7)
[2012-07-29 17:00] installed enca (1.13-2)
[2012-07-29 17:00] installed a52dec (0.7.4-6)
[2012-07-29 17:00] installed libdca (0.0.5-3)
[2012-07-29 17:00] installed talloc (2.0.7-1)
[2012-07-29 17:00] installed libwbclient (3.6.6-1)
[2012-07-29 17:00] installed libcap-ng (0.6.6-1)
[2012-07-29 17:00] installed cifs-utils (5.5-1)
[2012-07-29 17:00] installed tdb (1.2.9-2)
[2012-07-29 17:00] installed smbclient (3.6.6-1)
[2012-07-29 17:00] installed libmad (0.15.1b-6)
[2012-07-29 17:00] installed fribidi (0.19.2-2)
[2012-07-29 17:00] installed libmp4v2 (2.0.0-2)
[2012-07-29 17:00] installed faac (1.28-4)
[2012-07-29 17:00] installed faad2 (2.7-3)
[2012-07-29 17:00] installed mpg123 (1.14.4-1)
[2012-07-29 17:00] installed libass (0.10.0-3)
[2012-07-29 17:00] installed libbluray (0.2.2-1)
[2012-07-29 17:00] installed libcddb (1.3.2-3)
[2012-07-29 17:00] installed libcdio (0.83-1)
[2012-07-29 17:00] installed mencoder (35014-1)
[2012-07-29 17:00] installed libftdi (0.20-1)
[2012-07-29 17:00] installed libirman (0.4.5-3)
[2012-07-29 17:00] installed lirc-utils (1:0.9.0-22)
[2012-07-29 17:00] installed gpm (1.20.6-10)
[2012-07-29 17:00] installed aalib (1.4rc5-9)
[2012-07-29 17:00] installed jack (0.121.3-6)
[2012-07-29 17:00] installed libcaca (0.99.beta18-1)
[2012-07-29 17:00] installed xf86dgaproto (2.1-2)
[2012-07-29 17:00] installed libxxf86dga (1.1.3-1)
[2012-07-29 17:00] installed mplayer (35014-1)
[2012-07-29 17:00] Running 'pacman -U pms-1.60.0-1-x86_64.pkg.tar.xz'
[2012-07-29 17:00] installed pms (1.60.0-1)
[2012-07-29 17:20] Running 'pacman -S netstat'
[2012-07-29 17:31] Running 'pacman -S ntfs-3g'
[2012-07-29 17:31] installed fuse (2.9.0-1)
[2012-07-29 17:31] installed ntfs-3g (2012.1.15-3)
[2012-07-29 17:45] Running 'pacman -S tsmuxer'
[2012-07-29 17:45] Running 'pacman -S tsMuxeR'
[2012-07-29 17:45] Running 'pacman --noconfirm --asdeps -S -- lib32-freetype2'
[2012-07-29 17:45] installed lib32-bzip2 (1.0.6-1)
[2012-07-29 17:45] installed lib32-freetype2 (2.4.10-1)
[2012-07-29 17:48] Running 'pacman -U tsmuxer-1.10.6-12-x86_64.pkg.tar.xz'
[2012-07-29 17:48] The tsmuxer package is licensed software.
[2012-07-29 17:48] You MUST read and agree to the license stored in
[2012-07-29 17:48] /opt/tsmuxer/LICENSE before using it.
[2012-07-29 17:48] installed tsmuxer (1.10.6-12)
[2012-07-29 18:23] Running 'pacman -S icedtea-web-java7'
[2012-07-29 18:23] Running 'pacman -S icedtea-web-java6'
[2012-07-29 18:24] Running 'pacman -S openjre'
[2012-07-29 18:25] Running 'pacman -S jre'
[2012-07-29 18:25] Running 'pacman -S icetea-plugin'
[2012-07-29 18:27] Running 'pacman -S icedtea-web'
[2012-07-29 18:27] installed icedtea-web (1.2-1)
[2012-07-29 18:35] Running 'pacman -S ccache'
[2012-07-29 18:35] installed ccache (3.1.7-1)
[2012-07-29 18:50] Running 'pacman -S rtorrent'
[2012-07-29 18:50] installed libsigc++ (2.2.10-2)
[2012-07-29 18:50] installed libtorrent (0.13.2-2)
[2012-07-29 18:50] installed xmlrpc-c (1:1.31.02-2)
[2012-07-29 18:50] installed rtorrent (0.9.2-2)
[2012-07-29 18:52] Running 'pacman -S rutorrent'
[2012-07-29 18:52] Running 'pacman --noconfirm --asdeps -S -- php'
[2012-07-29 18:52] installed php (5.4.5-1)
[2012-07-29 18:52] Running 'pacman -U rutorrent-3.4-2-any.pkg.tar.xz'
[2012-07-29 18:53] installed rutorrent (3.4-2)
[2012-07-29 18:53] Running 'pacman -R rtorrent'
[2012-07-29 18:53] removed rtorrent (0.9.2-2)
[2012-07-29 18:53] Running 'pacman -S rtorrent-svn'
[2012-07-29 18:54] Running 'pacman -S rtorrent'
[2012-07-29 18:54] installed rtorrent (0.9.2-2)
[2012-07-29 18:54] Running 'pacman -S apache php-apache php-cgi mod-scgi php-xsl rutorrent-plugins php-geoip screen'
[2012-07-29 18:55] Running 'pacman -S apache php-apache php-cgi php-xsl rutorrent-plugins php-geoip screen'
[2012-07-29 18:55] Running 'pacman -S apache php-apache php-cgi php-xsl php-geoip screen'
[2012-07-29 18:55] installed apr (1.4.6-1)
[2012-07-29 18:55] installed unixodbc (2.3.1-1)
[2012-07-29 18:55] installed apr-util (1.4.1-1)
[2012-07-29 18:55] installed apache (2.2.22-4)
[2012-07-29 18:55] installed php-apache (5.4.5-1)
[2012-07-29 18:55] installed php-cgi (5.4.5-1)
[2012-07-29 18:55] installed php-xsl (5.4.5-1)
[2012-07-29 18:55] installed geoip-database (20120706-1)
[2012-07-29 18:55] installed geoip (1.4.8-2)
[2012-07-29 18:55] installed php-geoip (1.0.8-2)
[2012-07-29 18:55] installed screen (4.0.3-13)
[2012-07-29 19:03] Running 'pacman -U mod_scgi-1.14-1-x86_64.pkg.tar.xz'
[2012-07-29 19:03] installed mod_scgi (1.14-1)
[2012-07-29 19:03] Running 'pacman -U rutorrent-plugins-3.4-2-any.pkg.tar.xz'
[2012-07-29 19:03] installed rutorrent-plugins (3.4-2)
[2012-07-29 19:04] Running 'pacman -U rutorrent-3.4-2-any.pkg.tar.xz'
[2012-07-29 19:04] upgraded rutorrent (3.4-2 -> 3.4-2)
[2012-07-29 19:46] Running 'pacman -S unrar unzip'
[2012-07-29 19:46] installed unrar (4.2.4-1)
[2012-07-29 19:46] upgraded unzip (6.0-6 -> 6.0-6)
[2012-07-29 20:00] Running 'pacman -S php-apache mysql'
[2012-07-29 20:02] upgraded php-apache (5.4.5-1 -> 5.4.5-1)
[2012-07-29 20:02] installed libmysqlclient (5.5.25.a-1)
[2012-07-29 20:02] installed mysql-clients (5.5.25.a-1)
[2012-07-29 20:02] Installing MySQL system tables...
[2012-07-29 20:02] OK
[2012-07-29 20:02] Filling help tables...
[2012-07-29 20:02] OK
[2012-07-29 20:02]
[2012-07-29 20:02] To start mysqld at boot time you have to copy
[2012-07-29 20:02] support-files/mysql.server to the right place for your system
[2012-07-29 20:02]
[2012-07-29 20:02] PLEASE REMEMBER TO SET A PASSWORD FOR THE MySQL root USER !
[2012-07-29 20:02] To do so, start the server, then issue the following commands:
[2012-07-29 20:02]
[2012-07-29 20:02] /usr/bin/mysqladmin -u root password 'new-password'
[2012-07-29 20:02] /usr/bin/mysqladmin -u root -h arch-shauder password 'new-password'
[2012-07-29 20:02]
[2012-07-29 20:02] Alternatively you can run:
[2012-07-29 20:02] /usr/bin/mysql_secure_installation
[2012-07-29 20:02]
[2012-07-29 20:02] which will also give you the option of removing the test
[2012-07-29 20:02] databases and anonymous user created by default. This is
[2012-07-29 20:02] strongly recommended for production servers.
[2012-07-29 20:02]
[2012-07-29 20:02] See the manual for more instructions.
[2012-07-29 20:02]
[2012-07-29 20:02] You can start the MySQL daemon with:
[2012-07-29 20:02] cd /usr ; /usr/bin/mysqld_safe &
[2012-07-29 20:02]
[2012-07-29 20:02] You can test the MySQL daemon with mysql-test-run.pl
[2012-07-29 20:02] cd /usr/mysql-test ; perl mysql-test-run.pl
[2012-07-29 20:02]
[2012-07-29 20:02] Please report any problems with the /usr/scripts/mysqlbug script!
[2012-07-29 20:02]
[2012-07-29 20:02] installed mysql (5.5.25.a-1)
[2012-07-29 20:49] Running 'pacman -Syyu'
[2012-07-29 20:49] synchronizing package lists
[2012-07-29 20:50] starting full system upgrade
[2012-07-29 20:52] upgraded readline (6.2.003-2 -> 6.2.004-1)
[2012-07-29 20:52] upgraded bash (4.2.036-1 -> 4.2.037-1)
[2012-07-29 20:52] upgraded bison (2.5.1-1 -> 2.6-1)
[2012-07-29 20:52] upgraded lib32-gcc-libs (4.7.1-4.1 -> 4.7.1-5)
[2012-07-29 20:52] upgraded gcc-libs-multilib (4.7.1-4.1 -> 4.7.1-5)
[2012-07-29 20:52] upgraded gnutls (3.0.21-1 -> 3.0.21-2)
[2012-07-29 20:52] upgraded libpng (1.5.11-1 -> 1.5.12-1)
[2012-07-29 20:52] upgraded libcups (1.5.3-5 -> 1.5.4-1)
[2012-07-29 20:52] upgraded gtk-update-icon-cache (2.24.10-3 -> 2.24.11-2)
[2012-07-29 20:52] upgraded gtk2 (2.24.10-3 -> 2.24.11-2)
[2012-07-29 20:52] upgraded chromium (20.0.1132.57-1 -> 20.0.1132.57-2)
[2012-07-29 20:52] warning: /etc/protocols installed as /etc/protocols.pacnew
[2012-07-29 20:52] warning: /etc/services installed as /etc/services.pacnew
[2012-07-29 20:52] upgraded iana-etc (2.30-2 -> 2.30-3)
[2012-07-29 20:52] upgraded filesystem (2012.6-4 -> 2012.7-1)
[2012-07-29 20:52] upgraded libsystemd (186-2 -> 187-2)
[2012-07-29 20:52] upgraded glib2 (2.32.3-1 -> 2.32.4-1)
[2012-07-29 20:52] upgraded systemd-tools (186-2 -> 187-2)
[2012-07-29 20:52] upgraded dbus-core (1.6.2-2 -> 1.6.4-1)
[2012-07-29 20:52] upgraded dbus (1.6.2-1 -> 1.6.4-1)
[2012-07-29 20:52] upgraded flex (2.5.35-5 -> 2.5.36-1)
[2012-07-29 20:52] upgraded gcc-multilib (4.7.1-4.1 -> 4.7.1-5)
[2012-07-29 20:52] upgraded git (1.7.11.2-1 -> 1.7.11.3-1)
[2012-07-29 20:52] upgraded glproto (1.4.15-1 -> 1.4.16-1)
[2012-07-29 20:52] upgraded gtk3 (3.4.3-1 -> 3.4.4-1)
[2012-07-29 20:52] upgraded icu (49.1.2-1 -> 49.1.2-2)
[2012-07-29 20:52] warning: /etc/rc.conf installed as /etc/rc.conf.pacnew
[2012-07-29 20:52] upgraded initscripts (2012.06.3-2 -> 2012.07.5-1)
[2012-07-29 20:52] upgraded lib32-readline (6.2.003-1 -> 6.2.004-1)
[2012-07-29 20:52] >>> Updating module dependencies. Please wait ...
[2012-07-29 20:52] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2012-07-29 20:52] ==> Building image from preset: 'default'
[2012-07-29 20:52] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2012-07-29 20:52] ==> Starting build: 3.4.6-1-ARCH
[2012-07-29 20:52] -> Running build hook: [base]
[2012-07-29 20:52] -> Running build hook: [udev]
[2012-07-29 20:52] -> Running build hook: [autodetect]
[2012-07-29 20:52] -> Running build hook: [pata]
[2012-07-29 20:52] -> Running build hook: [scsi]
[2012-07-29 20:52] -> Running build hook: [sata]
[2012-07-29 20:52] -> Running build hook: [filesystems]
[2012-07-29 20:52] -> Running build hook: [usbinput]
[2012-07-29 20:52] -> Running build hook: [fsck]
[2012-07-29 20:52] ==> Generating module dependencies
[2012-07-29 20:52] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2012-07-29 20:52] ==> Image generation successful
[2012-07-29 20:52] ==> Building image from preset: 'fallback'
[2012-07-29 20:52] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2012-07-29 20:52] ==> Starting build: 3.4.6-1-ARCH
[2012-07-29 20:52] -> Running build hook: [base]
[2012-07-29 20:52] -> Running build hook: [udev]
[2012-07-29 20:52] -> Running build hook: [pata]
[2012-07-29 20:52] -> Running build hook: [scsi]
[2012-07-29 20:52] -> Running build hook: [sata]
[2012-07-29 20:52] -> Running build hook: [filesystems]
[2012-07-29 20:52] -> Running build hook: [usbinput]
[2012-07-29 20:52] -> Running build hook: [fsck]
[2012-07-29 20:52] ==> Generating module dependencies
[2012-07-29 20:52] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2012-07-29 20:52] ==> Image generation successful
[2012-07-29 20:52] upgraded linux (3.4.5-1 -> 3.4.6-1)
[2012-07-29 20:52] upgraded linux-api-headers (3.4.4-1 -> 3.4.6-1)
[2012-07-29 20:52] upgraded mesa (8.0.4-1 -> 8.0.4-2)
[2012-07-29 20:52] upgraded nvidia (302.17-3 -> 302.17-4)
[2012-07-29 20:52] upgraded tzdata (2012c-1 -> 2012d-1)
[2012-07-29 20:52] upgraded xf86-input-evdev (2.7.0-2 -> 2.7.1-1)
[2012-08-03 12:40] Running 'pacman -S filezilla'
[2012-08-03 12:40] installed wxgtk (2.8.12.1-3)
[2012-08-03 12:40] installed libidn (1.25-1)
[2012-08-03 12:40] installed filezilla (3.5.3-1)
[2012-08-06 13:55] Running 'pacman -R openjdk'
[2012-08-06 13:55] Running 'pacman -R openjdk6'
[2012-08-06 13:55] Running 'pacman -R icedtea-web'
[2012-08-06 13:55] removed icedtea-web (1.2-1)
[2012-08-06 13:56] Running 'pacman -S jdk'
[2012-08-06 13:57] Running 'pacman --asdeps -U jre-7.5-2-x86_64.pkg.tar.xz'
[2012-08-06 13:58] removed openjdk6 (6.b24_1.11.3-1)
[2012-08-06 13:58]
[2012-08-06 13:58] The jre package is licensed software.
[2012-08-06 13:58] You MUST read and agree to the license stored in
[2012-08-06 13:58] /usr/share/licenses/jre/LICENSE before using it.
[2012-08-06 13:58] Please relogin to include jre in your PATH.
[2012-08-06 13:58]
[2012-08-06 13:58] installed jre (7.5-2)
[2012-08-06 14:01] Running 'pacman -U jdk-7.5-2-x86_64.pkg.tar.xz'
[2012-08-06 14:01]
[2012-08-06 14:01] The jdk package is licensed software.
[2012-08-06 14:01] You MUST read and agree to the license stored in
[2012-08-06 14:01] /usr/share/licenses/jdk/LICENSE before using it.
[2012-08-06 14:01] Please relogin to include jdk in your PATH.
[2012-08-06 14:01]
[2012-08-06 14:01] installed jdk (7.5-2)
[2012-08-06 14:14] Running 'pacman --asdeps -U jre6-6u33-b04-x86_64.pkg.tar.xz'
[2012-08-06 14:15] Running 'pacman -R jdk jre'
[2012-08-06 14:16] Running 'pacman -U jre6-6u33-b04-x86_64.pkg.tar.xz'
[2012-08-06 14:17] Running 'pacman -Rdd jdk jre'
[2012-08-06 14:17] removed jdk (7.5-2)
[2012-08-06 14:17] removed jre (7.5-2)
[2012-08-06 14:19] Running 'pacman --asdeps -U jre6-6u33-b04-x86_64.pkg.tar.xz'
[2012-08-06 14:19] The jre package is licensed software.
[2012-08-06 14:19] You MUST read and agree to the license stored in
[2012-08-06 14:19] /opt/java/jre/LICENSE before using it.
[2012-08-06 14:19] Please relogin to include jre in your PATH.
[2012-08-06 14:19] installed jre6 (6u33-b04)
[2012-08-06 14:21] Running 'pacman -U jdk6-6u33-b04-x86_64.pkg.tar.xz'
[2012-08-06 14:21] The jdk package is licensed software.
[2012-08-06 14:21] You MUST read and agree to the license stored in
[2012-08-06 14:21] /opt/java/LICENSE before using it.
[2012-08-06 14:21] Please relogin to include jdk in your PATH
[2012-08-06 14:21] installed jdk6 (6u33-b04)
[2012-08-06 14:23] Running 'pacman -U jre6-6u33-b04-x86_64.pkg.tar.xz'
[2012-08-06 14:54] upgraded jre6 (6u33-b04 -> 6u33-b04)
[2012-08-06 17:23] Running 'pacman -S gimp'
[2012-08-06 17:23] installed lcms (1.19-2)
[2012-08-06 17:23] Updating font cache... done.
[2012-08-06 17:23] installed gsfonts (1.0.7pre44-3)
[2012-08-06 17:23] installed libwmf (0.2.8.4-9)
[2012-08-06 17:23] installed libcroco (0.6.5-1)
[2012-08-06 17:23] installed librsvg (2.36.1-1)
[2012-08-06 17:23] installed babl (0.1.10-1)
[2012-08-06 17:23] installed gegl (0.2.0-2)
[2012-08-06 17:23] installed freeglut (2.8.0-1)
[2012-08-06 17:23] installed jasper (1.900.1-7)
[2012-08-06 17:23] installed gimp (2.8.0-2)
[2012-08-06 18:25] Running 'pacman -Sy'
[2012-08-06 18:25] synchronizing package lists
[2012-08-06 18:25] Running 'pacman -S yaourt'
[2012-08-06 18:28] Running 'pacman -Sy'
[2012-08-06 18:28] synchronizing package lists
[2012-08-06 18:28] Running 'pacman -S lib32-gcc-libs lib32-glibc lib32-libx11 lib32-libxau lib32-libxcb lib32-libxdmcp lib32-libxext lib32-libxrender lib32-alsa-lib lib32-libstdc++5 lib32-libxv lib32-ncurses lib32-openal lib32-sdl lib32-zlib swt'
[2012-08-06 18:29] Running 'pacman -Sy'
[2012-08-06 18:29] synchronizing package lists
[2012-08-06 18:29] Running 'pacman -S lib32-gcc-libs lib32-glibc lib32-libx11 lib32-libxau lib32-libxcb lib32-libxdmcp lib32-libxext lib32-libxrender lib32-alsa-lib lib32-libstdc++5 lib32-libxv lib32-ncurses lib32-openal lib32-sdl lib32-zlib swt'
[2012-08-06 18:32] Running 'pacman --noconfirm --asdeps -S -- yajl'
[2012-08-06 21:50] Running 'pacman -U jdk6-6u33-b04-x86_64.pkg.tar.xz'
[2012-08-06 21:51] Running 'pacman -Rdd jdk6 jre6'
[2012-08-06 21:51] removed jdk6 (6u33-b04)
[2012-08-06 21:51] removed jre6 (6u33-b04)
[2012-08-06 21:54] Running 'pacman -U sun-java6-6u32-1-x86_64.pkg.tar.xz'
[2012-08-06 21:54] The sun-java6 package is licensed software.
[2012-08-06 21:54] You MUST read and agree to the license stored in
[2012-08-06 21:54] /opt/sun-java6/LICENSE before using it.
[2012-08-06 21:54]
[2012-08-06 21:54] Use '. /opt/sun-java6/envsetup.sh' to setup environment.
[2012-08-06 21:54] installed sun-java6 (6u32-1)
[2012-08-06 21:59] Running 'pacman -Syu'
[2012-08-06 21:59] synchronizing package lists
[2012-08-06 21:59] starting full system upgrade
[2012-08-06 22:00] Running 'pacman -Sy'
[2012-08-06 22:00] synchronizing package lists
[2012-08-06 22:00] Running 'pacman -S yaourt'
[2012-08-06 22:00] installed yajl (2.0.4-1)
[2012-08-06 22:00] installed package-query (1.0.1-1)
[2012-08-06 22:00] installed yaourt (1.1-1)
[2012-08-06 22:00] Running 'pacman -S extra/schedtool community/esdl'
[2012-08-06 22:00] upgraded schedtool (1.3.0-2 -> 1.3.0-2)
[2012-08-06 22:00] upgraded esdl (2:1.2-1 -> 2:1.2-1)
[2012-08-06 22:00] Running 'pacman -S extra/schedtool community/esdl'
[2012-08-06 22:00] upgraded schedtool (1.3.0-2 -> 1.3.0-2)
[2012-08-06 22:00] upgraded esdl (2:1.2-1 -> 2:1.2-1)
[2012-08-06 22:00] Running 'pacman -S --asdeps --needed extra/jdk7-openjdk'
[2012-08-06 22:01] installed java-rhino (1.7R3-3)
[2012-08-06 22:01] installed jre7-openjdk-headless (7.u5_2.2.1-1)
[2012-08-06 22:01] when you use a non-reparenting window manager
[2012-08-06 22:01] set _JAVA_AWT_WM_NONREPARENTING=1 in
[2012-08-06 22:01] /etc/profile.d/jre.sh
[2012-08-06 22:01] installed jre7-openjdk (7.u5_2.2.1-1)
[2012-08-06 22:01] installed jdk7-openjdk (7.u5_2.2.1-1)
[2012-08-06 22:02] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.kJz/android-apktool-1.4.9-1-x86_64.pkg.tar.xz'
[2012-08-06 22:02] installed android-apktool (1.4.9-1)
[2012-08-06 22:04] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.ubB/android-sdk-r20.0.1-1-x86_64.pkg.tar.xz'
[2012-08-06 22:05] You need to source /etc/profile or relogin to add the Android SDK tools to your path.
[2012-08-06 22:05] The android group has been removed, install android packages as root.
[2012-08-06 22:05] upgraded android-sdk (r20-2 -> r20.0.1-1)
[2012-08-06 22:08] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.g9s/android-sdk-platform-tools-r14-1-any.pkg.tar.xz'
[2012-08-06 22:08] upgraded android-sdk-platform-tools (r12-1 -> r14-1)
[2012-08-06 22:08] Running 'pacman -S --asdeps --needed extra/libmtp'
[2012-08-06 22:08] installed libmtp (1.1.3-1)
[2012-08-06 22:08] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.0Uc/android-udev-1.3-4-any.pkg.tar.xz'
[2012-08-06 22:08] ===> In order to use adb, you have to be in the 'adbusers' group
[2012-08-06 22:08] ===> For that, use: gpasswd -a USERNAME adbusers
[2012-08-06 22:08] installed android-udev (1.3-4)
[2012-08-06 22:08] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.n8w/fastboot-20110628-2-any.pkg.tar.xz'
[2012-08-06 22:08] installed fastboot (20110628-2)
[2012-08-06 22:09] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.aCT/pngcrush-1.7.35-1-x86_64.pkg.tar.xz'
[2012-08-06 22:09] upgraded pngcrush (1.7.31-1 -> 1.7.35-1)
[2012-08-06 22:09] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.ZNg/repo-git-20120806-1-x86_64.pkg.tar.xz'
[2012-08-06 22:10] Running 'pacman -S abs base-devel perl git gnupg flex bison gperf zip unzip sdl wxgtk squashfs-tools ncurses libpng zlib libusb libusb-compat readline alsa-lib openal'
[2012-08-06 22:11] Running 'pacman -S lib32-gcc-libs lib32-glibc lib32-libx11 lib32-libxau lib32-libxcb lib32-libxdmcp lib32-libxext lib32-libxrender lib32-alsa-lib lib32-libstdc++5 lib32-libxv lib32-ncurses lib32-openal lib32-sdl lib32-zlib swt'
[2012-08-06 22:11] upgraded lib32-glibc (2.16.0-2 -> 2.16.0-2)
[2012-08-06 22:11] upgraded lib32-gcc-libs (4.7.1-5 -> 4.7.1-5)
[2012-08-06 22:11] upgraded lib32-libxdmcp (1.1.1-1 -> 1.1.1-1)
[2012-08-06 22:11] upgraded lib32-libxau (1.0.7-1 -> 1.0.7-1)
[2012-08-06 22:11] upgraded lib32-libxcb (1.8.1-2 -> 1.8.1-2)
[2012-08-06 22:11] upgraded lib32-libx11 (1.5.0-1 -> 1.5.0-1)
[2012-08-06 22:11] upgraded lib32-libxext (1.3.1-1 -> 1.3.1-1)
[2012-08-06 22:11] upgraded lib32-libxrender (0.9.7-1 -> 0.9.7-1)
[2012-08-06 22:11] upgraded lib32-alsa-lib (1.0.25-1 -> 1.0.25-1)
[2012-08-06 22:11] upgraded lib32-libstdc++5 (3.3.6-6 -> 3.3.6-6)
[2012-08-06 22:11] upgraded lib32-libxv (1.0.7-1 -> 1.0.7-1)
[2012-08-06 22:11] upgraded lib32-ncurses (5.9-1 -> 5.9-1)
[2012-08-06 22:11] upgraded lib32-openal (1.14-1 -> 1.14-1)
[2012-08-06 22:11] upgraded lib32-sdl (1.2.15-2 -> 1.2.15-2)
[2012-08-06 22:11] upgraded lib32-zlib (1.2.7-1 -> 1.2.7-1)
[2012-08-06 22:11] upgraded swt (3.7.2-1 -> 3.7.2-1)
[2012-08-06 22:11] Running 'pacman -S gcc-multilib gcc-libs-multilib binutils-multilib libtool-multilib lib32-readline lib32-glibc lib32-zlib'
[2012-08-06 22:12] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.u2K/lib32-libusb-1.0.9-1-x86_64.pkg.tar.xz'
[2012-08-06 22:12] installed lib32-libusb (1.0.9-1)
[2012-08-06 22:12] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.ENc/lib32-libusb-compat-0.1.4-2-x86_64.pkg.tar.xz'
[2012-08-06 22:12] installed lib32-libusb-compat (0.1.4-2)
[2012-08-06 22:16] Running 'pacman -S ps3mediaserver'
[2012-08-06 22:17] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.WIi/pms-1.60.0-2-x86_64.pkg.tar.xz'
[2012-08-06 22:17] upgraded pms (1.60.0-1 -> 1.60.0-2)
[2012-08-06 22:18] Running 'pacman -Syu'
[2012-08-06 22:18] synchronizing package lists
[2012-08-06 22:18] starting full system upgrade
[2012-08-06 22:18] Running 'pacman -Syu'
[2012-08-06 22:18] synchronizing package lists
[2012-08-06 22:18] starting full system upgrade
[2012-08-06 22:20] upgraded bison (2.6-1 -> 2.6.2-1)
[2012-08-06 22:20] upgraded chromium (20.0.1132.57-2 -> 21.0.1180.57-1)
[2012-08-06 22:20] upgraded libldap (2.4.31-4 -> 2.4.32-1)
[2012-08-06 22:20] upgraded krb5 (1.10.2-2 -> 1.10.2-3)
[2012-08-06 22:20] upgraded cifs-utils (5.5-1 -> 5.6-2)
[2012-08-06 22:20] upgraded cryptsetup (1.4.3-1 -> 1.5.0-1)
[2012-08-06 22:20] upgraded curl (7.26.0-1 -> 7.27.0-1)
[2012-08-06 22:20] upgraded flex (2.5.36-1 -> 2.5.37-1)
[2012-08-06 22:20] upgraded fuse (2.9.0-1 -> 2.9.1-1)
[2012-08-06 22:20] upgraded git (1.7.11.3-1 -> 1.7.11.4-1)
[2012-08-06 22:20] upgraded gnutls (3.0.21-2 -> 3.0.22-1)
[2012-08-06 22:20] upgraded hwids (20120711-1 -> 20120730-1)
[2012-08-06 22:20] upgraded nvidia-utils (302.17-1 -> 304.32-1)
[2012-08-06 22:20] upgraded lib32-nvidia-utils (302.17-1 -> 304.32-1)
[2012-08-06 22:20] upgraded libcups (1.5.4-1 -> 1.6.1-2)
[2012-08-06 22:20] upgraded libmysqlclient (5.5.25.a-1 -> 5.5.27-1)
[2012-08-06 22:20] upgraded libsystemd (187-2 -> 187-4)
[2012-08-06 22:20] upgraded libthai (0.1.17-1 -> 0.1.18-1)
[2012-08-06 22:20] upgraded systemd-tools (187-2 -> 187-4)
[2012-08-06 22:20] upgraded mkinitcpio (0.9.2-2 -> 0.10-1)
[2012-08-06 22:20] >>> Updating module dependencies. Please wait ...
[2012-08-06 22:20] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2012-08-06 22:20] ==> Building image from preset: 'default'
[2012-08-06 22:20] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2012-08-06 22:20] ==> Starting build: 3.4.7-1-ARCH
[2012-08-06 22:20] -> Running build hook: [base]
[2012-08-06 22:20] -> Running build hook: [udev]
[2012-08-06 22:20] -> Running build hook: [autodetect]
[2012-08-06 22:20] -> Running build hook: [pata]
[2012-08-06 22:20] -> Running build hook: [scsi]
[2012-08-06 22:20] -> Running build hook: [sata]
[2012-08-06 22:20] -> Running build hook: [filesystems]
[2012-08-06 22:20] -> Running build hook: [usbinput]
[2012-08-06 22:20] -> Running build hook: [fsck]
[2012-08-06 22:20] ==> Generating module dependencies
[2012-08-06 22:20] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2012-08-06 22:20] ==> Image generation successful
[2012-08-06 22:20] ==> Building image from preset: 'fallback'
[2012-08-06 22:20] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2012-08-06 22:20] ==> Starting build: 3.4.7-1-ARCH
[2012-08-06 22:20] -> Running build hook: [base]
[2012-08-06 22:20] -> Running build hook: [udev]
[2012-08-06 22:20] -> Running build hook: [pata]
[2012-08-06 22:20] -> Running build hook: [scsi]
[2012-08-06 22:20] -> Running build hook: [sata]
[2012-08-06 22:20] -> Running build hook: [filesystems]
[2012-08-06 22:20] -> Running build hook: [usbinput]
[2012-08-06 22:20] -> Running build hook: [fsck]
[2012-08-06 22:20] ==> Generating module dependencies
[2012-08-06 22:20] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2012-08-06 22:20] ==> Image generation successful
[2012-08-06 22:20] upgraded linux (3.4.6-1 -> 3.4.7-1)
[2012-08-06 22:20] upgraded mysql-clients (5.5.25.a-1 -> 5.5.27-1)
[2012-08-06 22:20] upgraded mysql (5.5.25.a-1 -> 5.5.27-1)
[2012-08-06 22:20] upgraded nspr (4.9.1-1 -> 4.9.2-1)
[2012-08-06 22:20] upgraded nvidia (302.17-4 -> 304.32-1)
[2012-08-06 22:20] upgraded tzdata (2012d-1 -> 2012e-1)
[2012-08-06 22:20] upgraded xf86-input-evdev (2.7.1-1 -> 2.7.2-1)
[2012-08-06 22:23] Running 'pacman -S openjdk'
[2012-08-06 22:23] Running 'pacman -S jdk7-openjdk'
[2012-08-06 22:24] upgraded jdk7-openjdk (7.u5_2.2.1-1 -> 7.u5_2.2.1-1)
[2012-08-06 22:24] Running 'pacman -S jre7-openjdk'
[2012-08-06 22:24] upgraded jre7-openjdk (7.u5_2.2.1-1 -> 7.u5_2.2.1-1)
[2012-08-06 22:25] Running 'pacman -R pms'
[2012-08-06 22:25] warning: /opt/pms/PMS.conf saved as /opt/pms/PMS.conf.pacsave
[2012-08-06 22:25] removed pms (1.60.0-2)
[2012-08-06 22:26] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.QTF/pms-1.60.0-2-x86_64.pkg.tar.xz'
[2012-08-06 22:26] installed pms (1.60.0-2)
[2012-08-06 22:26] Running 'pacman -S vlc'
[2012-08-06 22:26] installed libdvbpsi (0.2.2-1)
[2012-08-06 22:26] installed sdl_image (1.2.12-2)
[2012-08-06 22:26] installed libdvdread (4.2.0-1)
[2012-08-06 22:26] installed libdvdnav (4.2.0-2)
[2012-08-06 22:26] installed libkate (0.4.1-3)
[2012-08-06 22:26] installed libtiger (0.3.4-3)
[2012-08-06 22:26] installed libebml (1.2.2-2)
[2012-08-06 22:26] installed libmatroska (1.3.0-2)
[2012-08-06 22:26] installed zvbi (0.2.33-4)
[2012-08-06 22:26] installed taglib (1.7.2-2)
[2012-08-06 22:26] installed libmpcdec (1.2.6-3)
[2012-08-06 22:26] installed libupnp (1.6.17-1)
[2012-08-06 22:26] installed libshout (1:2.3.0-1)
[2012-08-06 22:26] installed libmpeg2 (0.5.1-3)
[2012-08-06 22:26] installed libmodplug (0.8.8.4-1)
[2012-08-06 22:26] installed ttf-freefont (20120503-1)
[2012-08-06 22:26] installed vlc (2.0.3-2)
[2012-08-06 22:26] Running 'pacman -S lib32-gcc-libs lib32-glibc'
[2012-08-06 22:26] upgraded lib32-glibc (2.16.0-2 -> 2.16.0-2)
[2012-08-06 22:26] upgraded lib32-gcc-libs (4.7.1-5 -> 4.7.1-5)
[2012-08-07 11:44] Running 'pacman --noconfirm --asdeps -S -- pacman-color'
[2012-08-07 11:44] installed pacman-color (4.0.3-1)
[2012-08-07 11:44] Running 'pacman -U packer-color-20120807-1-any.pkg.tar.xz'
[2012-08-07 11:44] installed packer-color (20120807-1)
[2012-08-07 11:50] Running 'pacman-color -S packer'
[2012-08-07 15:50] Running 'pacman -Syyu'
[2012-08-07 15:50] synchronizing package lists
[2012-08-07 15:50] starting full system upgrade
[2012-08-07 15:50] upgraded libwbclient (3.6.6-1 -> 3.6.7-1)
[2012-08-07 15:51] upgraded smbclient (3.6.6-1 -> 3.6.7-1)
[2012-08-07 15:51] Running 'pacman -Sy'
[2012-08-07 15:51] synchronizing package lists
[2012-08-07 15:51] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.77j/rutorrent-plugins-3.4-3-any.pkg.tar.xz'
[2012-08-07 15:51] upgraded rutorrent-plugins (3.4-2 -> 3.4-3)
[2012-08-07 15:51] Running 'pacman -Sy'
[2012-08-07 15:51] synchronizing package lists
[2012-08-07 16:02] Running 'pacman-color -S crontab'
[2012-08-07 16:02] Running 'pacman-color -S cronjob'
[2012-08-07 16:02] Running 'pacman-color -S cron'
[2012-08-07 16:02] upgraded cronie (1.4.8-2 -> 1.4.8-2)
[2012-08-07 16:04] Running 'pacman-color -S cronie'
[2012-08-07 16:05] Running 'pacman-color -S esmtp procmail'
[2012-08-07 16:05] installed libesmtp (1.0.6-2)
[2012-08-07 16:05] installed esmtp (1.2-4)
[2012-08-07 16:05] installed procmail (3.22-5)
[2012-08-08 12:10] Running 'pacman -Sy'
[2012-08-08 12:10] synchronizing package lists
[2012-08-08 12:12] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.82R/pms-1.60.0-2-x86_64.pkg.tar.xz'
[2012-08-08 12:12] upgraded pms (1.60.0-2 -> 1.60.0-2)
[2012-08-08 18:02] Running 'pacman -R pms'
[2012-08-08 18:02] removed pms (1.60.0-2)
[2012-08-08 18:02] Running 'pacman -Sy'
[2012-08-08 18:02] synchronizing package lists
[2012-08-08 18:03] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.BkP/pms-1.60.0-2-x86_64.pkg.tar.xz'
[2012-08-08 18:03] installed pms (1.60.0-2)
[2012-08-08 18:17] Running 'pacman -S extra/icedtea-web'
[2012-08-08 18:17] Running 'pacman -S extra/icedtea-web-java7'
[2012-08-08 18:18] installed icedtea-web-java7 (1.2.1-2)
[2012-08-08 18:36] Running 'pacman -R pms'
[2012-08-08 1

shadowlurker wrote:
It's problem in pam configuration files. You need to create files useradd, userdel, groupadd and groupdel in /etc/pam.d/ directory with following content:
auth sufficient pam_rootok.so
auth required pam_unix.so
account required pam_unix.so
session required pam_unix.so
password required pam_permit.so
You da man! I also had to add grpconv and chage to get filesystem working but all seems well now thanks!
Doug piston had me try something that I think will help anyone else who has this problem. Try re-installing pambase and shadow. It generated back most of any I was missing.
Last edited by shauder (2012-11-03 00:55:19)

[SOLVED?] Problem with nVidia card

This is my first post, so; hello to everyone!! Thx in advance to this great community!!
My problem is pretty strange and anoying. I have an nVidia 8600GT in a Abit AX78 MB running Arch with KDE. Anything is going right until logon process. I write the user and password in KDM screen and then, after de animation of init proces of KDE, all graphics displayed are corrupted (a rectangle in the upper left corner is showed) and that's it. Only work the mouse pointer.
This malfunction its showed by the nouveau driver AND the proprietary driver... So i think the problem is it in other place than the driver of the card.
The Xorg.0.log and dmesg.log files are atached at the end of this thread.
I hope that annyone can help me.
Thx in advance again.
The Xorg.0.log file contains this:
[ 15.809]
X.Org X Server 1.10.3
Release Date: 2011-07-08
[ 15.814] X Protocol Version 11, Revision 0
[ 15.814] Build Operating System: Linux 2.6.39-ARCH i686
[ 15.814] Current Operating System: Linux hidramedia_host 2.6.39-ARCH #1 SMP PREEMPT Sat Jul 9 15:31:04 CEST 2011 i686
[ 15.815] Kernel command line: root=/dev/sda5 ro
[ 15.815] Build Date: 09 July 2011 07:57:07AM
[ 15.815]
[ 15.815] Current version of pixman: 0.22.2
[ 15.815] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 15.815] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 15.815] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 1 14:13:23 2011
[ 15.829] (==) Using config file: "/etc/X11/xorg.conf"
[ 15.829] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 15.835] (==) ServerLayout "Layout0"
[ 15.835] (**) |-->Screen "Screen0" (0)
[ 15.835] (**) | |-->Monitor "Monitor0"
[ 15.836] (**) | |-->Device "Device0"
[ 15.836] (**) |-->Input Device "Keyboard0"
[ 15.836] (**) |-->Input Device "Mouse0"
[ 15.836] (==) Automatically adding devices
[ 15.836] (==) Automatically enabling devices
[ 15.859] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 15.859] Entry deleted from font path.
[ 15.859] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 15.859] Entry deleted from font path.
[ 15.859] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 15.859] Entry deleted from font path.
[ 15.859] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 15.859] Entry deleted from font path.
[ 15.859] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 15.859] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 15.859] Entry deleted from font path.
[ 15.859] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 15.859] (==) FontPath set to:
/usr/share/fonts/misc/
[ 15.859] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 15.859] (**) Extension "Composite" is disabled
[ 15.859] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 15.859] (WW) Disabling Keyboard0
[ 15.859] (WW) Disabling Mouse0
[ 15.859] (II) Loader magic: 0x822e1a0
[ 15.859] (II) Module ABI versions:
[ 15.859] X.Org ANSI C Emulation: 0.4
[ 15.859] X.Org Video Driver: 10.0
[ 15.859] X.Org XInput driver : 12.2
[ 15.859] X.Org Server Extension : 5.0
[ 15.860] (--) PCI:*(0:1:0:0) 10de:0402:0000:0000 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000df00/128, BIOS @ 0x????????/131072
[ 15.860] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 15.860] (II) LoadModule: "extmod"
[ 15.871] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 15.880] (II) Module extmod: vendor="X.Org Foundation"
[ 15.880] compiled for 1.10.3, module version = 1.0.0
[ 15.880] Module class: X.Org Server Extension
[ 15.880] ABI class: X.Org Server Extension, version 5.0
[ 15.880] (II) Loading extension MIT-SCREEN-SAVER
[ 15.880] (II) Loading extension XFree86-VidModeExtension
[ 15.880] (II) Loading extension XFree86-DGA
[ 15.880] (II) Loading extension DPMS
[ 15.880] (II) Loading extension XVideo
[ 15.880] (II) Loading extension XVideo-MotionCompensation
[ 15.880] (II) Loading extension X-Resource
[ 15.880] (II) LoadModule: "dbe"
[ 15.880] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 15.881] (II) Module dbe: vendor="X.Org Foundation"
[ 15.881] compiled for 1.10.3, module version = 1.0.0
[ 15.881] Module class: X.Org Server Extension
[ 15.881] ABI class: X.Org Server Extension, version 5.0
[ 15.881] (II) Loading extension DOUBLE-BUFFER
[ 15.881] (II) LoadModule: "glx"
[ 15.881] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 16.640] (II) Module glx: vendor="NVIDIA Corporation"
[ 16.640] compiled for 4.0.2, module version = 1.0.0
[ 16.640] Module class: X.Org Server Extension
[ 16.640] (II) NVIDIA GLX Module 275.21 Mon Jul 18 14:55:52 PDT 2011
[ 16.640] (II) Loading extension GLX
[ 16.640] (II) LoadModule: "record"
[ 16.641] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 16.645] (II) Module record: vendor="X.Org Foundation"
[ 16.645] compiled for 1.10.3, module version = 1.13.0
[ 16.645] Module class: X.Org Server Extension
[ 16.645] ABI class: X.Org Server Extension, version 5.0
[ 16.645] (II) Loading extension RECORD
[ 16.645] (II) LoadModule: "dri"
[ 16.645] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 16.661] (II) Module dri: vendor="X.Org Foundation"
[ 16.661] compiled for 1.10.3, module version = 1.0.0
[ 16.661] ABI class: X.Org Server Extension, version 5.0
[ 16.661] (II) Loading extension XFree86-DRI
[ 16.661] (II) LoadModule: "dri2"
[ 16.661] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 16.662] (II) Module dri2: vendor="X.Org Foundation"
[ 16.662] compiled for 1.10.3, module version = 1.2.0
[ 16.662] ABI class: X.Org Server Extension, version 5.0
[ 16.662] (II) Loading extension DRI2
[ 16.662] (II) LoadModule: "nvidia"
[ 16.662] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 16.709] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 16.709] compiled for 4.0.2, module version = 1.0.0
[ 16.709] Module class: X.Org Video Driver
[ 16.732] (II) NVIDIA dlloader X Driver 275.21 Mon Jul 18 14:38:30 PDT 2011
[ 16.737] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 16.740] (++) using VT number 7
[ 16.751] (II) Loading sub module "fb"
[ 16.751] (II) LoadModule: "fb"
[ 16.751] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 16.762] (II) Module fb: vendor="X.Org Foundation"
[ 16.762] compiled for 1.10.3, module version = 1.0.0
[ 16.762] ABI class: X.Org ANSI C Emulation, version 0.4
[ 16.762] (II) Loading sub module "wfb"
[ 16.762] (II) LoadModule: "wfb"
[ 16.763] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 16.769] (II) Module wfb: vendor="X.Org Foundation"
[ 16.769] compiled for 1.10.3, module version = 1.0.0
[ 16.769] ABI class: X.Org ANSI C Emulation, version 0.4
[ 16.769] (II) Loading sub module "ramdac"
[ 16.769] (II) LoadModule: "ramdac"
[ 16.769] (II) Module "ramdac" already built-in
[ 16.771] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 16.771] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 16.771] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 16.780] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 16.780] (==) NVIDIA(0): RGB weight 888
[ 16.780] (==) NVIDIA(0): Default visual is TrueColor
[ 16.780] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 17.785] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 17.785] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 17.789] (II) NVIDIA(0): NVIDIA GPU GeForce 8600 GT (G84) at PCI:1:0:0 (GPU-0)
[ 17.789] (--) NVIDIA(0): Memory: 262144 kBytes
[ 17.789] (--) NVIDIA(0): VideoBIOS: 60.84.35.00.00
[ 17.789] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 17.789] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 17.789] (--) NVIDIA(0): Connected display device(s) on GeForce 8600 GT at PCI:1:0:0
[ 17.789] (--) NVIDIA(0): Samsung SyncMaster (CRT-0)
[ 17.789] (--) NVIDIA(0): Samsung SyncMaster (CRT-0): 400.0 MHz maximum pixel clock
[ 17.859] (II) NVIDIA(0): Assigned Display Device: CRT-0
[ 17.859] (==) NVIDIA(0):
[ 17.859] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 17.859] (==) NVIDIA(0): will be used as the requested mode.
[ 17.859] (==) NVIDIA(0):
[ 17.859] (II) NVIDIA(0): Validated modes:
[ 17.859] (II) NVIDIA(0): "nvidia-auto-select"
[ 17.859] (II) NVIDIA(0): Virtual screen size determined to be 800 x 600
[ 17.900] (--) NVIDIA(0): DPI set to (72, 72); computed from "UseEdidDpi" X config
[ 17.900] (--) NVIDIA(0): option
[ 17.900] (--) Depth 24 pixmap format is 32 bpp
[ 17.901] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 17.905] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 17.905] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 17.905] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 17.905] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 17.905] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 17.905] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 17.905] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 17.905] (II) NVIDIA(0): Config Options in the README.
[ 17.908] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 17.946] (II) Loading extension NV-GLX
[ 18.001] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 18.002] (==) NVIDIA(0): Backing store disabled
[ 18.002] (==) NVIDIA(0): Silken mouse enabled
[ 18.002] (**) NVIDIA(0): DPMS enabled
[ 18.002] (II) Loading extension NV-CONTROL
[ 18.003] (II) Loading extension XINERAMA
[ 18.003] (II) Loading sub module "dri2"
[ 18.003] (II) LoadModule: "dri2"
[ 18.003] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 18.003] (II) Module dri2: vendor="X.Org Foundation"
[ 18.003] compiled for 1.10.3, module version = 1.2.0
[ 18.003] ABI class: X.Org Server Extension, version 5.0
[ 18.003] (II) NVIDIA(0): [DRI2] Setup complete
[ 18.003] (==) RandR enabled
[ 18.003] (II) Initializing built-in extension Generic Event Extension
[ 18.003] (II) Initializing built-in extension SHAPE
[ 18.003] (II) Initializing built-in extension MIT-SHM
[ 18.003] (II) Initializing built-in extension XInputExtension
[ 18.003] (II) Initializing built-in extension XTEST
[ 18.003] (II) Initializing built-in extension BIG-REQUESTS
[ 18.003] (II) Initializing built-in extension SYNC
[ 18.003] (II) Initializing built-in extension XKEYBOARD
[ 18.003] (II) Initializing built-in extension XC-MISC
[ 18.003] (II) Initializing built-in extension SECURITY
[ 18.003] (II) Initializing built-in extension XINERAMA
[ 18.003] (II) Initializing built-in extension XFIXES
[ 18.003] (II) Initializing built-in extension RENDER
[ 18.003] (II) Initializing built-in extension RANDR
[ 18.003] (II) Initializing built-in extension COMPOSITE
[ 18.003] (II) Initializing built-in extension DAMAGE
[ 18.005] (II) Initializing extension GLX
[ 18.213] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 18.213] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 18.213] (II) LoadModule: "evdev"
[ 18.213] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.214] (II) Module evdev: vendor="X.Org Foundation"
[ 18.214] compiled for 1.10.0, module version = 2.6.0
[ 18.214] Module class: X.Org XInput Driver
[ 18.214] ABI class: X.Org XInput driver, version 12.2
[ 18.214] (II) Using input driver 'evdev' for 'Power Button'
[ 18.214] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.214] (**) Power Button: always reports core events
[ 18.214] (**) Power Button: Device: "/dev/input/event3"
[ 18.226] (--) Power Button: Found keys
[ 18.226] (II) Power Button: Configuring as keyboard
[ 18.226] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 18.226] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 18.226] (**) Option "xkb_rules" "evdev"
[ 18.226] (**) Option "xkb_model" "evdev"
[ 18.226] (**) Option "xkb_layout" "us"
[ 18.252] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 18.252] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 18.252] (II) Using input driver 'evdev' for 'Power Button'
[ 18.252] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.252] (**) Power Button: always reports core events
[ 18.252] (**) Power Button: Device: "/dev/input/event2"
[ 18.266] (--) Power Button: Found keys
[ 18.266] (II) Power Button: Configuring as keyboard
[ 18.266] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 18.266] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 18.266] (**) Option "xkb_rules" "evdev"
[ 18.266] (**) Option "xkb_model" "evdev"
[ 18.266] (**) Option "xkb_layout" "us"
[ 18.271] (II) config/udev: Adding input device Primax Electronics Wireless Mouse (/dev/input/event1)
[ 18.271] (**) Primax Electronics Wireless Mouse: Applying InputClass "evdev pointer catchall"
[ 18.271] (II) Using input driver 'evdev' for 'Primax Electronics Wireless Mouse'
[ 18.271] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.271] (**) Primax Electronics Wireless Mouse: always reports core events
[ 18.271] (**) Primax Electronics Wireless Mouse: Device: "/dev/input/event1"
[ 18.283] (--) Primax Electronics Wireless Mouse: Found 3 mouse buttons
[ 18.283] (--) Primax Electronics Wireless Mouse: Found scroll wheel(s)
[ 18.283] (--) Primax Electronics Wireless Mouse: Found relative axes
[ 18.283] (--) Primax Electronics Wireless Mouse: Found x and y relative axes
[ 18.283] (II) Primax Electronics Wireless Mouse: Configuring as mouse
[ 18.283] (II) Primax Electronics Wireless Mouse: Adding scrollwheel support
[ 18.283] (**) Primax Electronics Wireless Mouse: YAxisMapping: buttons 4 and 5
[ 18.283] (**) Primax Electronics Wireless Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 18.283] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.4/usb6/6-2/6-2:1.0/input/input1/event1"
[ 18.283] (II) XINPUT: Adding extended input device "Primax Electronics Wireless Mouse" (type: MOUSE)
[ 18.283] (II) Primax Electronics Wireless Mouse: initialized for relative axes.
[ 18.283] (**) Primax Electronics Wireless Mouse: (accel) keeping acceleration scheme 1
[ 18.283] (**) Primax Electronics Wireless Mouse: (accel) acceleration profile 0
[ 18.283] (**) Primax Electronics Wireless Mouse: (accel) acceleration factor: 2.000
[ 18.283] (**) Primax Electronics Wireless Mouse: (accel) acceleration threshold: 4
[ 18.283] (II) config/udev: Adding input device Primax Electronics Wireless Mouse (/dev/input/mouse0)
[ 18.283] (II) No input driver/identifier specified (ignoring)
[ 18.285] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[ 18.285] (II) No input driver/identifier specified (ignoring)
[ 18.285] (II) config/udev: Adding input device HDA ATI SB Headphone (/dev/input/event6)
[ 18.285] (II) No input driver/identifier specified (ignoring)
[ 18.286] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 18.286] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 18.286] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 18.286] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.286] (**) AT Translated Set 2 keyboard: always reports core events
[ 18.286] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 18.300] (--) AT Translated Set 2 keyboard: Found keys
[ 18.300] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 18.300] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 18.300] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 18.300] (**) Option "xkb_rules" "evdev"
[ 18.300] (**) Option "xkb_model" "evdev"
[ 18.300] (**) Option "xkb_layout" "us"
[ 18.300] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 18.300] (II) No input driver/identifier specified (ignoring)
[ 1563.531] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 1563.587] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 1563.587] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 1563.587] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 1563.587] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 1563.587] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 1563.587] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 1563.587] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 1563.587] (II) NVIDIA(0): Config Options in the README.
And the dmesg.log file contains this:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.39-ARCH (thomas@evey) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Sat Jul 9 15:31:04 CEST 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
[ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.5 present.
[ 0.000000] DMI: . ./AX78(AMD770+SB600), BIOS 6.00 PG 01/17/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7fff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-CFFFF uncachable
[ 0.000000] D0000-D3FFF write-back
[ 0.000000] D4000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00f41f0] f41f0
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 7fdc9000 - 7ffe0000
[ 0.000000] Allocated new RAMDISK: 375e7000 - 377fd792
[ 0.000000] Move RAMDISK from 000000007fdc9000 - 000000007ffdf791 to 375e7000 - 377fd791
[ 0.000000] ACPI: RSDP 000f81d0 00024 (v02 AMD770)
[ 0.000000] ACPI: RSDT 7fff3000 00038 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 7fff3080 00074 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 7fff3100 051E2 (v01 AMD770 AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 7fff0000 00040
[ 0.000000] ACPI: SSDT 7fff83c0 002CC (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 7fff86c0 00038 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000098)
[ 0.000000] ACPI: MCFG 7fff8700 0003C (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 7fff8300 00084 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1159MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fff0
[ 0.000000] On node 0 totalpages: 524159
[ 0.000000] free_area_init_node: node 0, pgdat c14a1980, node_mem_map f65e6200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2320 pages used for memmap
[ 0.000000] HighMem zone: 294626 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f6000000 s27648 r0 d21504 u1048576
[ 0.000000] pcpu-alloc: s27648 r0 d21504 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520063
[ 0.000000] Kernel command line: root=/dev/sda5 ro
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 8388096 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007fff0)
[ 0.000000] Memory: 2062632k/2097088k available (3376k kernel code, 34004k reserved, 1390k data, 512k init, 1187784k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc14a8000 - 0xc1528000 ( 512 kB)
[ 0.000000] .data : 0xc134c3bf - 0xc14a7c00 (1390 kB)
[ 0.000000] .text : 0xc1000000 - 0xc134c3bf (3376 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:512
[ 0.000000] CPU 0 irqstacks, hard=f540c000 soft=f540e000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: Unable to calibrate against PIT
[ 0.000000] TSC: using HPET reference calibration
[ 0.000000] Detected 2700.236 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.016736] Calibrating delay loop (skipped), value calculated using timer frequency.. 5402.49 BogoMIPS (lpj=9000786)
[ 0.016870] pid_max: default: 32768 minimum: 301
[ 0.016983] Security Framework initialized
[ 0.017051] AppArmor: AppArmor disabled by boot time parameter
[ 0.017144] Mount-cache hash table entries: 512
[ 0.017404] Initializing cgroup subsys ns
[ 0.017471] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.017549] Initializing cgroup subsys cpuacct
[ 0.017625] Initializing cgroup subsys memory
[ 0.017701] Initializing cgroup subsys devices
[ 0.017767] Initializing cgroup subsys freezer
[ 0.017833] Initializing cgroup subsys net_cls
[ 0.017899] Initializing cgroup subsys blkio
[ 0.017995] CPU: Physical Processor ID: 0
[ 0.018060] CPU: Processor Core ID: 0
[ 0.018126] mce: CPU supports 5 MCE banks
[ 0.018199] using C1E aware idle routine
[ 0.019127] ACPI: Core revision 20110316
[ 0.023362] ftrace: allocating 15225 entries in 30 pages
[ 0.026734] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.027332] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061631] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02
[ 0.063329] Performance Events: AMD PMU driver.
[ 0.063329] ... version: 0
[ 0.063329] ... bit width: 48
[ 0.063329] ... generic registers: 4
[ 0.063329] ... value mask: 0000ffffffffffff
[ 0.063329] ... max period: 00007fffffffffff
[ 0.063329] ... fixed-purpose events: 0
[ 0.063329] ... event mask: 000000000000000f
[ 0.080086] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.106674] CPU 1 irqstacks, hard=f54b4000 soft=f54b6000
[ 0.106676] Booting Node 0, Processors #1
[ 0.106783] smpboot cpu 1: start_ip = 9b000
[ 0.019998] Initializing CPU#1
[ 0.200085] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.206657] Brought up 2 CPUs
[ 0.206721] Total of 2 processors activated (10805.88 BogoMIPS).
[ 0.207206] devtmpfs: initialized
[ 0.207206] PM: Registering ACPI NVS region at 7fff0000 (12288 bytes)
[ 0.207649] print_constraints: dummy:
[ 0.207764] NET: Registered protocol family 16
[ 0.207919] node 0 link 0: io port [c000, ffff]
[ 0.207922] TOM: 0000000080000000 aka 2048M
[ 0.207987] node 0 link 0: mmio [a0000, bffff]
[ 0.207990] node 0 link 0: mmio [80000000, dfffffff]
[ 0.207992] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.207995] node 0 link 0: mmio [e0000000, e03fffff]
[ 0.207997] bus: [00, 03] on node 0 link 0
[ 0.208000] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.208002] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.208003] bus: 00 index 2 [mem 0x80000000-0xefffffff]
[ 0.208005] bus: 00 index 3 [mem 0xf0000000-0xffffffff]
[ 0.208011] ACPI: bus type pci registered
[ 0.208149] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.208227] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.208292] PCI: Using MMCONFIG for extended config space
[ 0.208357] PCI: Using configuration type 1 for base access
[ 0.208842] bio: create slab <bio-0> at 0
[ 0.210574] ACPI: EC: Look up EC in DSDT
[ 0.211181] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.214150] ACPI: Interpreter enabled
[ 0.214220] ACPI: (supports S0 S3 S4 S5)
[ 0.214501] ACPI: Using IOAPIC for interrupt routing
[ 0.225790] ACPI: No dock devices found.
[ 0.225854] HEST: Table not found.
[ 0.225919] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.226037] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.226190] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.226257] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.226324] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.226399] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.226474] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xffffffff]
[ 0.226562] pci 0000:00:00.0: [1002:5957] type 0 class 0x000600
[ 0.226576] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.226609] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
[ 0.226636] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.226639] pci 0000:00:02.0: PME# disabled
[ 0.226667] pci 0000:00:0a.0: [1002:597f] type 1 class 0x000604
[ 0.226693] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.226696] pci 0000:00:0a.0: PME# disabled
[ 0.226723] pci 0000:00:12.0: [1002:4380] type 0 class 0x000106
[ 0.226742] pci 0000:00:12.0: reg 10: [io 0xff00-0xff07]
[ 0.226752] pci 0000:00:12.0: reg 14: [io 0xfe00-0xfe03]
[ 0.226763] pci 0000:00:12.0: reg 18: [io 0xfd00-0xfd07]
[ 0.226773] pci 0000:00:12.0: reg 1c: [io 0xfc00-0xfc03]
[ 0.226784] pci 0000:00:12.0: reg 20: [io 0xfb00-0xfb0f]
[ 0.226794] pci 0000:00:12.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.226836] pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03
[ 0.226851] pci 0000:00:13.0: reg 10: [mem 0xfe02e000-0xfe02efff]
[ 0.226919] pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03
[ 0.226933] pci 0000:00:13.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
[ 0.227002] pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03
[ 0.227016] pci 0000:00:13.2: reg 10: [mem 0xfe02c000-0xfe02cfff]
[ 0.227084] pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03
[ 0.227099] pci 0000:00:13.3: reg 10: [mem 0xfe02b000-0xfe02bfff]
[ 0.227166] pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03
[ 0.227181] pci 0000:00:13.4: reg 10: [mem 0xfe02a000-0xfe02afff]
[ 0.227255] pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03
[ 0.227275] pci 0000:00:13.5: reg 10: [mem 0xfe029000-0xfe0290ff]
[ 0.227351] pci 0000:00:13.5: supports D1 D2
[ 0.227352] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.227357] pci 0000:00:13.5: PME# disabled
[ 0.227379] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.227402] pci 0000:00:14.0: reg 10: [io 0x0b00-0x0b0f]
[ 0.227483] pci 0000:00:14.1: [1002:438c] type 0 class 0x000101
[ 0.227497] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.227507] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.227518] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.227528] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.227538] pci 0000:00:14.1: reg 20: [io 0xf900-0xf90f]
[ 0.227577] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.227600] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
[ 0.227663] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.227667] pci 0000:00:14.2: PME# disabled
[ 0.227681] pci 0000:00:14.3: [1002:438d] type 0 class 0x000601
[ 0.227759] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.227808] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.227823] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.227835] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.227848] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.227903] pci 0000:01:00.0: [10de:0402] type 0 class 0x000300
[ 0.227914] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[ 0.227926] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.227937] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
[ 0.227945] pci 0000:01:00.0: reg 24: [io 0xdf00-0xdf7f]
[ 0.227953] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.233329] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.233396] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.233399] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.233404] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.233444] pci 0000:02:00.0: [11ab:4364] type 0 class 0x000200
[ 0.233462] pci 0000:02:00.0: reg 10: [mem 0xfdffc000-0xfdffffff 64bit]
[ 0.233472] pci 0000:02:00.0: reg 18: [io 0xee00-0xeeff]
[ 0.233505] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.233535] pci 0000:02:00.0: supports D1 D2
[ 0.233537] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.233541] pci 0000:02:00.0: PME# disabled
[ 0.239995] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.240062] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.240065] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.240069] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.240134] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.240203] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.240207] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.240212] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
[ 0.240214] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.240217] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.240219] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.240221] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.240224] pci 0000:00:14.4: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
[ 0.240236] pci_bus 0000:00: on NUMA node 0
[ 0.240239] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.240363] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.240408] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.240440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.240465] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.240531] Unable to assume _OSC PCIe control. Disabling ASPM
[ 0.251996] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.252665] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.253351] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.254017] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.254684] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.255350] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.257059] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.257725] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.258446] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.258522] vgaarb: loaded
[ 0.258678] PCI: Using ACPI for IRQ routing
[ 0.258742] PCI: pci_cache_line_size set to 64 bytes
[ 0.258749] pci 0000:00:00.0: address space collision: [mem 0xe0000000-0xffffffff 64bit] conflicts with PCI Bus 0000:01 [mem 0xf8000000-0xfbffffff]
[ 0.258890] reserve RAM buffer: 000000000009f400 - 000000000009ffff
[ 0.258893] reserve RAM buffer: 000000007fff0000 - 000000007fffffff
[ 0.259004] NetLabel: Initializing
[ 0.259067] NetLabel: domain hash size = 128
[ 0.259131] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.259205] NetLabel: unlabeled traffic allowed by default
[ 0.259287] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.259608] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.261015] Switching to clocksource hpet
[ 0.261499] Switched to NOHz mode on CPU #0
[ 0.261582] Switched to NOHz mode on CPU #1
[ 0.266362] pnp: PnP ACPI init
[ 0.266443] ACPI: bus type pnp registered
[ 0.266593] pnp 00:00: [bus 00-ff]
[ 0.266598] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.266600] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.266602] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.266604] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.266606] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.266609] pnp 00:00: [mem 0x80000000-0xffffffff window]
[ 0.266662] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.266792] pnp 00:01: [io 0x4100-0x411f]
[ 0.266794] pnp 00:01: [io 0x0228-0x022f]
[ 0.266796] pnp 00:01: [io 0x040b]
[ 0.266798] pnp 00:01: [io 0x04d6]
[ 0.266799] pnp 00:01: [io 0x0c00-0x0c01]
[ 0.266801] pnp 00:01: [io 0x0c14]
[ 0.266803] pnp 00:01: [io 0x0c50-0x0c52]
[ 0.266805] pnp 00:01: [io 0x0c6c-0x0c6d]
[ 0.266807] pnp 00:01: [io 0x0c6f]
[ 0.266808] pnp 00:01: [io 0x0cd0-0x0cd1]
[ 0.266810] pnp 00:01: [io 0x0cd2-0x0cd3]
[ 0.266812] pnp 00:01: [io 0x0cd4-0x0cdf]
[ 0.266814] pnp 00:01: [io 0x4000-0x40fe]
[ 0.266815] pnp 00:01: [io 0x4210-0x4217]
[ 0.266817] pnp 00:01: [io 0x0b10-0x0b1f]
[ 0.266819] pnp 00:01: [mem 0x00000000-0x00000fff window]
[ 0.266822] pnp 00:01: [mem 0xfee00400-0xfee00fff window]
[ 0.266828] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.266939] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.267023] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.267131] system 00:01: [io 0x4100-0x411f] has been reserved
[ 0.267198] system 00:01: [io 0x0228-0x022f] has been reserved
[ 0.267264] system 00:01: [io 0x040b] has been reserved
[ 0.267330] system 00:01: [io 0x04d6] has been reserved
[ 0.267395] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.267461] system 00:01: [io 0x0c14] has been reserved
[ 0.267530] system 00:01: [io 0x0c50-0x0c52] has been reserved
[ 0.267596] system 00:01: [io 0x0c6c-0x0c6d] has been reserved
[ 0.267662] system 00:01: [io 0x0c6f] has been reserved
[ 0.267727] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.267793] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.267859] system 00:01: [io 0x0cd4-0x0cdf] has been reserved
[ 0.267926] system 00:01: [io 0x4000-0x40fe] has been reserved
[ 0.267992] system 00:01: [io 0x4210-0x4217] has been reserved
[ 0.268058] system 00:01: [io 0x0b10-0x0b1f] has been reserved
[ 0.268125] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 0.268201] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.268290] pnp 00:02: [dma 4]
[ 0.268291] pnp 00:02: [io 0x0000-0x000f]
[ 0.268293] pnp 00:02: [io 0x0080-0x0090]
[ 0.268295] pnp 00:02: [io 0x0094-0x009f]
[ 0.268297] pnp 00:02: [io 0x00c0-0x00df]
[ 0.268326] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.268366] pnp 00:03: [irq 0 disabled]
[ 0.268380] pnp 00:03: [irq 8]
[ 0.268382] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.268408] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.268430] pnp 00:04: [io 0x0070-0x0073]
[ 0.268456] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.268463] pnp 00:05: [io 0x0061]
[ 0.268488] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.268495] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.268504] pnp 00:06: [irq 13]
[ 0.268535] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.268566] pnp 00:07: [io 0x0010-0x001f]
[ 0.268567] pnp 00:07: [io 0x0022-0x003f]
[ 0.268569] pnp 00:07: [io 0x0044-0x005f]
[ 0.268571] pnp 00:07: [io 0x0062-0x0063]
[ 0.268573] pnp 00:07: [io 0x0065-0x006f]
[ 0.268575] pnp 00:07: [io 0x0074-0x007f]
[ 0.268576] pnp 00:07: [io 0x0091-0x0093]
[ 0.268578] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.268580] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.268582] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.268632] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.268699] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.269033] pnp 00:08: [io 0x0060]
[ 0.269034] pnp 00:08: [io 0x0064]
[ 0.269043] pnp 00:08: [irq 1]
[ 0.269080] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.269127] pnp 00:09: [mem 0x000f0000-0x000fffff]
[ 0.269129] pnp 00:09: [mem 0x00000000-0x001fffff]
[ 0.269131] pnp 00:09: [mem 0xfed00000-0xfed000ff]
[ 0.269132] pnp 00:09: [mem 0x7fff0000-0x7fffffff]
[ 0.269134] pnp 00:09: [mem 0xffff0000-0xffffffff]
[ 0.269136] pnp 00:09: [mem 0x00000000-0x0009ffff]
[ 0.269138] pnp 00:09: [mem 0x00100000-0x7ffeffff]
[ 0.269140] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[ 0.269142] pnp 00:09: [mem 0xfee00000-0xfee00fff]
[ 0.269144] pnp 00:09: [mem 0xfff80000-0xfffeffff]
[ 0.269148] pnp 00:09: disabling [mem 0x000f0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.269229] pnp 00:09: disabling [mem 0x00000000-0x001fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.269309] pnp 00:09: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.269390] pnp 00:09: disabling [mem 0x00100000-0x7ffeffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.269519] system 00:09: [mem 0xfed00000-0xfed000ff] has been reserved
[ 0.269587] system 00:09: [mem 0x7fff0000-0x7fffffff] could not be reserved
[ 0.269654] system 00:09: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.269721] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.269788] system 00:09: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.269855] system 00:09: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.269922] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.269930] pnp: PnP ACPI: found 10 devices
[ 0.269994] ACPI: ACPI bus type pnp unregistered
[ 0.306168] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref]
[ 0.306245] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.306311] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.306378] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.306445] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.306523] pci 0000:02:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
[ 0.306598] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.306664] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.306741] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.306809] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.306886] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 0.306952] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.307022] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.307090] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
[ 0.307175] pci 0000:00:02.0: setting latency timer to 64
[ 0.307180] pci 0000:00:0a.0: setting latency timer to 64
[ 0.307188] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.307190] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.307192] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.307194] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.307197] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff]
[ 0.307199] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.307201] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.307203] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.307206] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.307208] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff]
[ 0.307210] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.307213] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.307215] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.307217] pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
[ 0.307219] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.307222] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.307224] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.307226] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.307228] pci_bus 0000:03: resource 8 [mem 0x80000000-0xffffffff]
[ 0.307274] NET: Registered protocol family 2
[ 0.307398] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.307694] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.308325] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.308652] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.308719] TCP reno registered
[ 0.308783] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.308856] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.309050] NET: Registered protocol family 1
[ 0.426742] pci 0000:01:00.0: Boot video device
[ 0.426749] PCI: CLS 64 bytes, default 64
[ 0.426800] Unpacking initramfs...
[ 0.460291] Freeing initrd memory: 2140k freed
[ 0.461639] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 0.461707] apm: disabled - APM is not SMP safe.
[ 0.461884] audit: initializing netlink socket (disabled)
[ 0.461957] type=2000 audit(1312207987.459:1): initialized
[ 0.462290] highmem bounce pool size: 64 pages
[ 0.462357] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.464180] VFS: Disk quotas dquot_6.5.2
[ 0.464312] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.464469] msgmni has been set to 1712
[ 0.464730] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.464841] io scheduler noop registered
[ 0.464907] io scheduler deadline registered
[ 0.464983] io scheduler cfq registered (default)
[ 0.465152] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.465180] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.465225] pcieport 0000:00:0a.0: setting latency timer to 64
[ 0.465246] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
[ 0.465393] ERST: Table is not found!
[ 0.465467] isapnp: Scanning for PnP cards...
[ 0.822554] isapnp: No Plug & Play device found
[ 0.822675] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.050031] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.050099] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.050669] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.050792] mousedev: PS/2 mouse device common for all mice
[ 1.050892] rtc_cmos 00:04: RTC can wake from S4
[ 1.074526] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.076767] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.076869] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.076954] cpuidle: using governor ladder
[ 1.077018] cpuidle: using governor menu
[ 1.077281] TCP cubic registered
[ 1.077345] NET: Registered protocol family 17
[ 1.077415] Registering the dns_resolver key type
[ 1.077492] Using IPI No-Shortcut mode
[ 1.077626] PM: Hibernation image not present or could not be loaded.
[ 1.077633] registered taskstats version 1
[ 1.077987] rtc_cmos 00:04: setting system clock to 2011-08-01 14:13:08 UTC (1312207988)
[ 1.078086] Initializing network drop monitor service
[ 1.078222] Freeing unused kernel memory: 512k freed
[ 1.078587] Write protecting the kernel text: 3380k
[ 1.078672] Write protecting the kernel read-only data: 1028k
[ 1.088713] udevd[47]: starting version 171
[ 1.180160] SCSI subsystem initialized
[ 1.197209] usbcore: registered new interface driver usbfs
[ 1.197412] usbcore: registered new interface driver hub
[ 1.197625] usbcore: registered new device driver usb
[ 1.215729] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.215840] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.215930] ehci_hcd 0000:00:13.5: EHCI Host Controller
[ 1.216028] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
[ 1.226748] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 1.226842] ehci_hcd 0000:00:13.5: debug port 1
[ 1.226937] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
[ 1.237087] libata version 3.00 loaded.
[ 1.240040] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
[ 1.240292] hub 1-0:1.0: USB hub found
[ 1.240359] hub 1-0:1.0: 10 ports detected
[ 1.240733] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.241613] scsi0 : pata_atiixp
[ 1.241804] scsi1 : pata_atiixp
[ 1.242405] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
[ 1.242472] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
[ 1.244130] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.244228] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.244315] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.244390] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 1.250091] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
[ 1.307508] hub 2-0:1.0: USB hub found
[ 1.307579] hub 2-0:1.0: 2 ports detected
[ 1.307730] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.307813] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.307889] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 1.326729] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
[ 1.384201] hub 3-0:1.0: USB hub found
[ 1.384274] hub 3-0:1.0: 2 ports detected
[ 1.384428] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.384511] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 1.384583] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 1.405209] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
[ 1.460849] hub 4-0:1.0: USB hub found
[ 1.460923] hub 4-0:1.0: 2 ports detected
[ 1.461068] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.461149] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 1.461220] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[ 1.480027] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
[ 1.537463] hub 5-0:1.0: USB hub found
[ 1.537533] hub 5-0:1.0: 2 ports detected
[ 1.537661] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.537735] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 1.537805] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[ 1.553363] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
[ 1.610820] hub 6-0:1.0: USB hub found
[ 1.610890] hub 6-0:1.0: 2 ports detected
[ 1.611025] ahci 0000:00:12.0: version 3.0
[ 1.611043] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.611127] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 1.611295] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.611377] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc
[ 1.612922] scsi2 : ahci
[ 1.613831] scsi3 : ahci
[ 1.614815] scsi4 : ahci
[ 1.614997] scsi5 : ahci
[ 1.615170] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[ 1.615247] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[ 1.615324] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[ 1.615400] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[ 1.933384] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.933527] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.063354] usb 6-2: new low speed USB device number 2 using ohci_hcd
[ 2.106684] ata3: softreset failed (device not ready)
[ 2.106751] ata3: applying SB600 PMP SRST workaround and retrying
[ 2.106831] ata4: softreset failed (device not ready)
[ 2.106897] ata4: applying SB600 PMP SRST workaround and retrying
[ 2.273373] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.273477] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.275971] ata4.00: ATAPI: HL-DT-ST DVDRAM GH20NS10, EL00, max UDMA/100
[ 2.276040] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.278897] ata3.00: ATA-7: SAMSUNG HD161HJ, JF100-19, max UDMA7
[ 2.278963] ata3.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.279030] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.279635] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.279701] ata4.00: configured for UDMA/100
[ 2.284467] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.284533] ata3.00: configured for UDMA/133
[ 2.284747] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD161HJ JF10 PQ: 0 ANSI: 5
[ 2.397145] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS10 EL00 PQ: 0 ANSI: 5
[ 2.407639] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.407755] sd 2:0:0:0: [sda] Write Protect is off
[ 2.407821] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.407838] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.411375] input: Primax Electronics Wireless Mouse as /devices/pci0000:00/0000:00:13.4/usb6/6-2/6-2:1.0/input/input1
[ 2.411568] generic-usb 0003:0461:4D25.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [Primax Electronics Wireless Mouse] on usb-0000:00:13.4-2/input0
[ 2.411669] usbcore: registered new interface driver usbhid
[ 2.411745] usbhid: USB HID core driver
[ 2.437927] sda: sda1 sda2 sda3 < sda5 >
[ 2.438378] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.518436] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.518516] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.518787] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.959493] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 4.003984] udevd[255]: starting version 171
[ 4.140765] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 4.140858] ACPI: Power Button [PWRB]
[ 4.140981] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 4.141058] ACPI: Power Button [PWRF]
[ 4.154881] Linux agpgart interface v0.103
[ 4.157785] ACPI: Fan [FAN] (on)
[ 4.158635] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 4.161972] ACPI: acpi_idle registered with cpuidle
[ 4.162457] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 4.228336] sky2: driver version 1.28
[ 4.228452] sky2 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.228527] sky2 0000:02:00.0: setting latency timer to 64
[ 4.228555] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 5
[ 4.228709] sky2 0000:02:00.0: irq 42 for MSI/MSI-X
[ 4.228991] sky2 0000:02:00.0: eth0: addr 00:50:8d:ba:48:da
[ 4.232113] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 4.250935] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 4.302867] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 4.356767] ACPI Warning: For \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference (20110316/nspredef-1059)
[ 4.356967] ACPI: Expecting a [Reference] package element, found type 0
[ 4.357033] ACPI: Invalid passive threshold
[ 4.363965] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 4.364111] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 4.476288] nvidia: module license 'NVIDIA' taints kernel.
[ 4.476360] Disabling lock debugging due to kernel taint
[ 4.556743] thermal LNXTHERM:00: registered as thermal_zone0
[ 4.556813] ACPI: Thermal Zone [THRM] (44 C)
[ 4.691172] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.775620] hda_codec: ALC888: BIOS auto-probing.
[ 4.777062] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input5
[ 4.781547] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 5.638691] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.638769] nvidia 0000:01:00.0: setting latency timer to 64
[ 5.638774] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 5.639105] NVRM: loading NVIDIA UNIX x86 Kernel Module 275.21 Mon Jul 18 14:37:03 PDT 2011
[ 5.886530] EXT4-fs (sda5): re-mounted. Opts: (null)
[ 5.965890] Adding 996024k swap on /dev/sda2. Priority:-1 extents:1 across:996024k
Last edited by Fuentes (2011-08-16 22:44:13)

the contents of /home/user/.xsession-errors
startkde: Starting up...
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
kbuildsycoca4 running...
kded(920) LayoutMemoryPersister::restoreFromFile: Failed to open layout memory xml file for reading "/home/alvaro/.kde4/share/apps/kded/session/keyboard/layout_memory.xml" error: 5
kded(920)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
No outputs have backlight property
QDBusConnection: name 'org.kde.kglobalaccel' had owner '' but we thought it was ':1.5'
kded(920) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed
Object::connect: No such signal QDBusAbstractInterface::Changed()
Invalid D-BUS member name 'idle-hint' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'is-local' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'x11-display-device' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'x11-display' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'display-device' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'remote-host-name' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'session-type' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'unix-user' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
QDBusObjectPath: invalid path ""
QDBusObjectPath: invalid path ""
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e00141
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0x8bf31cc
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e00141
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e00143
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e00143
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e00145
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e00145
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e00147
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e00147
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e00149
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e00149
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e0014b
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e0014b
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e0014d
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e0014d
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e0014f
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e0014f
Object::connect: No such signal QDBusAbstractInterface::Changed()
Object::connect: No such signal KWindowSystem::windowChanged(WId,unsigned long*)
kwin(977): Compositing is not possible
kwin(977): Compositing is not possible
kwin(977): Compositing is not possible
kded(920) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed
kded(920) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed
kded(920) PowerDevilUPowerBackend::setBrightness: org.kde.powerdevil.backlighthelper.setbrightness failed
kded(920) PowerDevilUPowerBackend::setBrightness: org.kde.powerdevil.backlighthelper.setbrightness failed
QProcess: Destroyed while process is still running.
plasma-desktop(1001): Communication problem with "plasma-desktop" , it probably crashed.
Error message was: "org.freedesktop.DBus.Error.Disconnected" : " "Connection was disconnected before a reply was received" "
kdeinit4: Fatal IO error: client killed
kdeinit4: sending SIGHUP to children.
klauncher: Exiting on signal 1
kglobalaccel: Fatal IO error: client killed
kdeinit4: Fatal IO error: client killed
kdeinit4: sending SIGHUP to children.
ksmserver: Fatal IO error: client killed
kdeinit4: sending SIGTERM to children.
kdeinit4: Exit.
kded4: Fatal IO error: client killed
kdeinit4: sending SIGTERM to children.
kdeinit4: Exit.

I had already update mi new factory unlocked iPhone 4S to iOS 5.1.1 and I still having problems with "invalid sim". I'm from Argentina and here we don't have official service. PLEASE HELP ME, WHAT CAN I DO??? In Argentina is too expensive an iPhone 4S.

I had already update mi new factory unlocked iPhone 4S to iOS 5.1.1 and I still having problems with "invalid sim". I'm from Argentina and here we don't have official service. PLEASE HELP ME, WHAT CAN I DO??? In Argentina is too expensive an iPhone 4S. Please I need help to continue believing in Apple. Thanks a lot. If anybody speak spanish better.

Was it purchased from an official Apple Store, not a reseller? Only Apple Stores sell official factory unlocked phones. The others sell hacked to unlock phones, and the unlocking is unstable.
Try these steps, as needed:
1. Reset phone - press both home and on/off buttons for at least 10 seconds until the Apple logo appears.
2. Settings > General > Reset > Reset Network Settings.
3. Replace SIM card (and reset network settings again)
4. Restore Phone in iTunes using a backup
5. Restore in iTunes as new, without using a backup

Problem with usb devices

hi guys,
i have a problem with my usb devices.
the dmesg:
Linux version 2.6.30-ARCH (root@T-POWA-LX) (gcc version 4.4.1 (GCC) ) #1 SMP PREEMPT Fri Jul 31 07:30:28 CEST 2009
Command line: root=/dev/sda5 vga=0x0361 ro
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fed0000 (usable)
BIOS-e820: 000000007fed0000 - 000000007fee3000 (ACPI NVS)
BIOS-e820: 000000007fee3000 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
DMI present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x7fed0 max_arch_pfn = 0x100000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 07FF00000 mask FFFF00000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009f800 (usable)
modified: 000000000009f800 - 00000000000a0000 (reserved)
modified: 00000000000ce000 - 00000000000d0000 (reserved)
modified: 00000000000dc000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000007fed0000 (usable)
modified: 000000007fed0000 - 000000007fee3000 (ACPI NVS)
modified: 000000007fee3000 - 0000000080000000 (reserved)
modified: 00000000e0000000 - 00000000f0000000 (reserved)
modified: 00000000fec00000 - 00000000fec10000 (reserved)
modified: 00000000fed00000 - 00000000fed00400 (reserved)
modified: 00000000fed14000 - 00000000fed1a000 (reserved)
modified: 00000000fed1c000 - 00000000fed90000 (reserved)
modified: 00000000fee00000 - 00000000fee01000 (reserved)
modified: 00000000ff000000 - 0000000100000000 (reserved)
init_memory_mapping: 0000000000000000-000000007fed0000
0000000000 - 007fe00000 page 2M
007fe00000 - 007fed0000 page 4k
kernel direct mapping tables up to 7fed0000 @ 10000-14000
RAMDISK: 37d42000 - 37fefc39
ACPI: RSDP 00000000000f7fe0 00024 (v02 PTLTD )
ACPI: XSDT 000000007fedab41 0008C (v01 Sony VAIO 20070418 PTL 00000000)
ACPI: FACP 000000007fee1bd2 000F4 (v03 Sony VAIO 20070418 PTL 00000001)
ACPI: DSDT 000000007fedbeeb 05C73 (v02 Sony VAIO 20070418 PTL 20050624)
ACPI: FACS 000000007fee2fc0 00040
ACPI: APIC 000000007fee1cc6 00068 (v01 Sony VAIO 20070418 PTL 0000005A)
ACPI: HPET 000000007fee1d2e 00038 (v01 Sony VAIO 20070418 PTL 0000005A)
ACPI: MCFG 000000007fee1d66 0003C (v01 Sony VAIO 20070418 PTL 0000005A)
ACPI: TCPA 000000007fee1da2 00032 (v01 Sony VAIO 20070418 PTL 00005A52)
ACPI: SLIC 000000007fee1dd4 00176 (v01 Sony VAIO 20070418 PTL 01000000)
ACPI: TMOR 000000007fee1f4a 00026 (v01 Sony VAIO 20070418 PTL 00000003)
ACPI: APIC 000000007fee1f70 00068 (v01 Sony VAIO 20070418 PTL 00000000)
ACPI: BOOT 000000007fee1fd8 00028 (v01 Sony VAIO 20070418 PTL 00000001)
ACPI: SSDT 000000007fedbc29 002C2 (v01 Sony VAIO 20070418 PTL 20050624)
ACPI: SSDT 000000007fedb159 0025F (v01 Sony VAIO 20070418 PTL 20050624)
ACPI: SSDT 000000007fedb0b3 000A6 (v01 Sony VAIO 20070418 PTL 20050624)
ACPI: SSDT 000000007fedabcd 004E6 (v01 Sony VAIO 20070418 PTL 20050624)
ACPI: BIOS bug: multiple APIC/MADT found, using 0
ACPI: If "acpi_apic_instance=2" works better, notify [email protected]
ACPI: Local APIC address 0xfee00000
(7 early reservations) ==> bootmem [0000000000 - 007fed0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0000200000 - 000082d0d0] TEXT DATA BSS ==> [0000200000 - 000082d0d0]
#3 [0037d42000 - 0037fefc39] RAMDISK ==> [0037d42000 - 0037fefc39]
#4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
#5 [000082e000 - 000082e204] BRK ==> [000082e000 - 000082e204]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
found SMP MP-table at [ffff8800000f8010] f8010
[ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0007fed0
On node 0 totalpages: 523871
DMA zone: 56 pages used for memmap
DMA zone: 1682 pages reserved
DMA zone: 2245 pages, LIFO batch:0
DMA32 zone: 7108 pages used for memmap
DMA32 zone: 512780 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
PM: Registered nosave memory: 00000000000d0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 25 pages at ffff880001010000, static data 72352 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515025
Kernel command line: root=/dev/sda5 vga=0x0361 ro
Initializing CPU#0
NR_IRQS:768
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 1994.610 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2053736k/2095936k available (3409k kernel code, 452k absent, 41160k reserved, 1239k data, 464k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.43 BogoMIPS (lpj=6648700)
Security Framework initialized
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20090320
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3991.23 BogoMIPS (lpj=6649976)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (7982.67 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
net_namespace: 1888 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE storm detected, transactions will use polling mode
ACPI: EC: missing confirmations, switch off interrupt mode.
[Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0x1800-0x181f]
pci 0000:00:1a.1: reg 20 io port: [0x1820-0x183f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xfc404800-0xfc404bff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc400000-0xfc403fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x1840-0x185f]
pci 0000:00:1d.1: reg 20 io port: [0x1860-0x187f]
pci 0000:00:1d.2: reg 20 io port: [0x1880-0x189f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc404c00-0xfc404fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.1: reg 20 io port: [0x18a0-0x18af]
pci 0000:00:1f.2: reg 10 io port: [0x18d8-0x18df]
pci 0000:00:1f.2: reg 14 io port: [0x18cc-0x18cf]
pci 0000:00:1f.2: reg 18 io port: [0x18d0-0x18d7]
pci 0000:00:1f.2: reg 1c io port: [0x18c8-0x18cb]
pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xfc404000-0xfc4047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff]
pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xce000000-0xceffffff]
pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xcc000000-0xcdffffff]
pci 0000:01:00.0: reg 24 io port: [0x2000-0x207f]
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xcc000000-0xceffffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xf6000000-0xf7ffffff]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff]
pci 0000:00:1c.1: bridge io port: [0x4000-0x4fff]
pci 0000:00:1c.1: bridge 32bit mmio: [0xf8000000-0xf9ffffff]
pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf2000000-0xf3ffffff]
pci 0000:06:00.0: reg 10 32bit mmio: [0xfa000000-0xfa000fff]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:00:1c.2: bridge io port: [0x5000-0x5fff]
pci 0000:00:1c.2: bridge 32bit mmio: [0xfa000000-0xfbffffff]
pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf4000000-0xf5ffffff]
pci 0000:08:00.0: reg 10 64bit mmio: [0xfc000000-0xfc003fff]
pci 0000:08:00.0: reg 18 io port: [0x6000-0x60ff]
pci 0000:08:00.0: supports D1 D2
pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:00.0: PME# disabled
pci 0000:00:1c.4: bridge io port: [0x6000-0x6fff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xfc000000-0xfc0fffff]
pci 0000:09:03.0: reg 10 32bit mmio: [0xfc100000-0xfc100fff]
pci 0000:09:03.0: supports D1 D2
pci 0000:09:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:03.0: PME# disabled
pci 0000:09:03.1: reg 10 32bit mmio: [0xfc102000-0xfc1027ff]
pci 0000:09:03.1: reg 14 32bit mmio: [0xfc104000-0xfc107fff]
pci 0000:09:03.1: supports D1 D2
pci 0000:09:03.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:03.1: PME# disabled
pci 0000:09:03.2: reg 10 32bit mmio: [0xfc101000-0xfc101fff]
pci 0000:09:03.2: supports D1 D2
pci 0000:09:03.2: PME# supported from D0 D1 D2 D3hot
pci 0000:09:03.2: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xfc100000-0xfc1fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
system 00:06: ioport range 0x680-0x69f has been reserved
system 00:06: ioport range 0x800-0x80f has been reserved
system 00:06: ioport range 0x1000-0x107f has been reserved
system 00:06: ioport range 0x1180-0x11bf has been reserved
system 00:06: ioport range 0x1640-0x164f has been reserved
system 00:06: ioport range 0xfe00-0xfe7f has been reserved
system 00:06: ioport range 0xfe80-0xfeff has been reserved
pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0x2000-0x2fff
pci 0000:00:01.0: MEM window: 0xcc000000-0xceffffff
pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: IO window: 0x3000-0x3fff
pci 0000:00:1c.0: MEM window: 0xf6000000-0xf7ffffff
pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.1: IO window: 0x4000-0x4fff
pci 0000:00:1c.1: MEM window: 0xf8000000-0xf9ffffff
pci 0000:00:1c.1: PREFETCH window: 0x000000f2000000-0x000000f3ffffff
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06
pci 0000:00:1c.2: IO window: 0x5000-0x5fff
pci 0000:00:1c.2: MEM window: 0xfa000000-0xfbffffff
pci 0000:00:1c.2: PREFETCH window: 0x000000f4000000-0x000000f5ffffff
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:08
pci 0000:00:1c.4: IO window: 0x6000-0x6fff
pci 0000:00:1c.4: MEM window: 0xfc000000-0xfc0fffff
pci 0000:00:1c.4: PREFETCH window: disabled
pci 0000:09:03.0: CardBus bridge, secondary bus 0000:0a
pci 0000:09:03.0: IO window: 0x007000-0x0070ff
pci 0000:09:03.0: IO window: 0x007400-0x0074ff
pci 0000:09:03.0: PREFETCH window: 0x88000000-0x8bffffff
pci 0000:09:03.0: MEM window: 0x90000000-0x93ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09
pci 0000:00:1e.0: IO window: 0x7000-0x7fff
pci 0000:00:1e.0: MEM window: 0xfc100000-0xfc1fffff
pci 0000:00:1e.0: PREFETCH window: 0x00000088000000-0x0000008bffffff
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:09:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:01: resource 1 mem: [0xcc000000-0xceffffff]
pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
pci_bus 0000:02: resource 0 io: [0x3000-0x3fff]
pci_bus 0000:02: resource 1 mem: [0xf6000000-0xf7ffffff]
pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf1ffffff]
pci_bus 0000:04: resource 0 io: [0x4000-0x4fff]
pci_bus 0000:04: resource 1 mem: [0xf8000000-0xf9ffffff]
pci_bus 0000:04: resource 2 pref mem [0xf2000000-0xf3ffffff]
pci_bus 0000:06: resource 0 io: [0x5000-0x5fff]
pci_bus 0000:06: resource 1 mem: [0xfa000000-0xfbffffff]
pci_bus 0000:06: resource 2 pref mem [0xf4000000-0xf5ffffff]
pci_bus 0000:08: resource 0 io: [0x6000-0x6fff]
pci_bus 0000:08: resource 1 mem: [0xfc000000-0xfc0fffff]
pci_bus 0000:09: resource 0 io: [0x7000-0x7fff]
pci_bus 0000:09: resource 1 mem: [0xfc100000-0xfc1fffff]
pci_bus 0000:09: resource 2 pref mem [0x88000000-0x8bffffff]
pci_bus 0000:09: resource 3 io: [0x00-0xffff]
pci_bus 0000:09: resource 4 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:0a: resource 0 io: [0x7000-0x70ff]
pci_bus 0000:0a: resource 1 io: [0x7400-0x74ff]
pci_bus 0000:0a: resource 2 pref mem [0x88000000-0x8bffffff]
pci_bus 0000:0a: resource 3 mem: [0x90000000-0x93ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs...
Freeing initrd memory: 2743k freed
Simple Boot Flag at 0x36 set to 0x1
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1249997463.944:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 4017
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.2: irq 27 for MSI/MSI-X
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pcieport-driver 0000:00:1c.4: irq 28 for MSI/MSI-X
pcieport-driver 0000:00:1c.4: setting latency timer to 64
vesafb: framebuffer at 0xcd000000, mapped to 0xffffc20010100000, using 8000k, total 14336k
vesafb: mode is 1280x800x32, linelength=5120, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 160x50
fb0: VESA VGA frame buffer device
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 464k freed
SCSI subsystem initialized
libata version 3.00 loaded.
pata_acpi 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pata_acpi 0000:00:1f.1: setting latency timer to 64
pata_acpi 0000:00:1f.1: PCI INT A disabled
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404100 irq 29
ata2: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404180 irq 29
ata3: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404200 irq 29
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: ATA-7: FUJITSU MHV2200BT, 0000004F, max UDMA/100
ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2200B 0000 PQ: 0 ANSI: 5
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
ata4.00: ATAPI: MATSHITABD-MLT UJ-220V, 1.00, max UDMA/33
ata4.00: configured for UDMA/33
scsi 3:0:0:0: CD-ROM MATSHITA BD-MLT UJ-220V 1.00 PQ: 0 ANSI: 5
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [email protected]
Intel AES-NI instructions are not detected.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
udev: starting version 141
sky2 driver version 1.22
sky2 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sky2 0000:08:00.0: setting latency timer to 64
sky2 0000:08:00.0: Yukon-2 FE chip revision 1
sky2 0000:08:00.0: irq 30 for MSI/MSI-X
sky2 eth0: addr 00:13:a9:c1:09:33
cfg80211: Calling CRDA to update world regulatory domain
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 3:0:0:0: Attached scsi generic sg1 type 5
ACPI: AC Adapter [ADP1] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
ACPI: SSDT 000000007fedb8e7 0027A (v01 Sony VAIO 20070418 PTL 20050624)
ACPI: SSDT 000000007fedb3b8 004AA (v01 Sony VAIO 20070418 PTL 20050624)
ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 000000007fedbb61 000C8 (v01 Sony VAIO 20070418 PTL 20050624)
ACPI: SSDT 000000007fedb862 00085 (v01 Sony VAIO 20070418 PTL 20050624)
ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320]
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (58 C)
input: PC Speaker as /devices/platform/pcspkr/input/input4
sony-laptop: Sony Notebook Control Driver v0.6.
input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:29/SNY5001:00/input/input5
input: Sony Vaio Jogdial as /devices/virtual/input/input6
ACPI: Invalid active0 threshold
iTCO_vendor_support: vendor-support=0
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (58 C)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: Battery Slot [BAT0] (battery present)
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc404800
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc404c00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input7
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input8
usb 1-2: new high speed USB device using ehci_hcd and address 2
usb 1-2: configuration #1 chosen from 1 choice
usb 2-3: new high speed USB device using ehci_hcd and address 3
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
yenta_cardbus 0000:09:03.0: CardBus bridge found [104d:9005]
yenta_cardbus 0000:09:03.0: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:09:03.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:09:03.0: TI: mfunc 0x01121b22, devctl 0x64
usb 2-3: configuration #1 chosen from 1 choice
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.31 Tue Jul 28 17:52:27 PDT 2009
yenta_cardbus 0000:09:03.0: ISA IRQ mask 0x0cf8, PCI irq 16
yenta_cardbus 0000:09:03.0: Socket status: 30000006
pci_bus 0000:09: Raising subordinate bus# of parent bus (#09) from #0a to #0d
yenta_cardbus 0000:09:03.0: pcmcia: parent PCI bridge I/O window: 0x7000 - 0x7fff
yenta_cardbus 0000:09:03.0: pcmcia: parent PCI bridge Memory window: 0xfc100000 - 0xfc1fffff
yenta_cardbus 0000:09:03.0: pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
iwl3945: Copyright(c) 2003-2009 Intel Corporation
iwl3945 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
iwl3945 0000:06:00.0: setting latency timer to 64
ohci1394 0000:09:03.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fc102000-fc1027ff] Max Packet=[2048] IR/IT contexts=[4/8]
tifm_7xx1 0000:09:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
hub 2-0:1.0: unable to enumerate USB device on port 5
iwl3945 0000:06:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
iwl3945 0000:06:00.0: Detected Intel Wireless WiFi Link 3945ABG
iwl3945 0000:06:00.0: irq 31 for MSI/MSI-X
Initializing USB Mass Storage driver...
scsi5 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/input/input9
input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/input/input10
usb 5-1: new low speed USB device using uhci_hcd and address 2
usbcore: registered new interface driver hiddev
Linux video capture interface: v2.00
input: Western Digital My Book as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.1/input/input11
generic-usb 0003:1058:1102.0001: input,hidraw0: USB HID v1.11 Device [Western Digital My Book] on usb-0000:00:1d.7-3/input1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
uvcvideo: Found UVC 1.00 device <unnamed> (05ca:1837)
uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
uvcvideo: Failed to initialize the device (-5).
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
phy0: Selected rate control algorithm 'iwl-3945-rs'
usb 5-1: configuration #1 chosen from 1 choice
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input12
generic-usb 0003:046D:C518.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.1/input/input13
generic-usb 0003:046D:C518.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1/input1
fuse init (API version 7.11)
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
vboxdrv: Found 2 processor cores.
VBoxDrv: dbg - g_abExecMemory=ffffffffa0f05760
vboxdrv: fAsync=0 offMin=0x1ae offMax=0x125c
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 3.0.4 (interface 0x000e0000).
VBoxNetFlt: dbg - g_abExecMemory=ffffffffa10a9f00
hub 2-0:1.0: unable to enumerate USB device on port 5
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800460302564f69]
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
Clocksource tsc unstable (delta = -435934901 ns)
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
EXT3 FS on dm-0, internal journal
scsi 5:0:0:0: Direct-Access WD My Book 1028 PQ: 0 ANSI: 4
sd 5:0:0:0: Attached scsi generic sg2 type 0
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
sd 5:0:0:0: [sdb] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 10 00 00 00
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb-storage: device scan complete
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 5:0:0:0: [sdb] Attached SCSI disk
EXT4-fs: barriers enabled
kjournald2 starting: pid 1929, dev dm-1:8, commit interval 5 seconds
EXT4 FS on dm-1, internal journal on dm-1:8
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem dm-1 with ordered data mode
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
Adding 2449872k swap on /dev/sda6. Priority:-1 extents:1 across:2449872k
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
iwl3945 0000:06:00.0: firmware: requesting iwlwifi-3945-2.ucode
hub 2-0:1.0: unable to enumerate USB device on port 5
iwl3945 0000:06:00.0: loaded firmware version 15.32.2.9
Registered led device: iwl-phy0::radio
Registered led device: iwl-phy0::assoc
Registered led device: iwl-phy0::RX
Registered led device: iwl-phy0::TX
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
wlan0: authenticate with AP 00:11:6b:10:2f:bc
wlan0: authenticated
wlan0: associate with AP 00:11:6b:10:2f:bc
wlan0: RX AssocResp from 00:11:6b:10:2f:bc (capab=0x471 status=0 aid=1)
wlan0: associated
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
i think the result is, that my bluetooth and webcam isn't working...
can you help me pls.
regards nigg
Last edited by nigg (2009-08-11 14:14:57)

I'm also having this problem. It's happening with my USB flash disk. I was almost buying another one when I tried it with Windows Vista on the same machine and it worked ok, then I tried Arch Linux (with kernel 2.6.30.5) on another machine and got the same error. After that I tried Ubuntu and it worked ok. Seems that Arch's kernel doesn't like my USB flash disk.
Last edited by esdrasbeleza (2009-09-02 01:16:09)

Cd rom boot problems with MEGA 180

I recently recieved my MEGA 180 and have been unable to successfully install an OS because when I boot from CD, the computer freezes at various stages of installation. The point at which it freezes varies between the point at which the CD is initialized to anywhere in the windows xp setup process up untill the drive format. Occassionally the lockup coincides with an error copying a file, but this is not consistent. I have tried two different cd-rom drives as well as three different xp installation cds. Further I have run with 5 different sticks of ram (kingston and corsair). None of these changes have had any obvious effect.
Having read the warning labes regarding non MSI optical devices, I am tempted to think that may be the problem as I am not running on an MSI drive. However, the warning souned like it was about mechanical parts and thus I assume the ability of a drive to fit in the MEGA 180 case while opening and closing correctly.
I would appreciate any input you might have on this matter as I am finding this experience rather frustrating.

I had the exact same problem when upgrading from a 2100+ Palamino processor to a 2800+ Thoroghbred one. The screen had already dissappeared due to powering up with no monitor plugged in, so I tried a reinstall of Windows XP. It kept falling over randomly during the install process. I then swapper the CPU back and had no problems at all. I have since lapped the heatsink and reduced the FSB to 157MHz in the BIOS, and have not had a problem with the 2800+ CPU. I have not tried installing windows again, but feel this will be OK too.
My test is to run FujiFilm Snapshot Slideshow, which sends the CPU temp rocketting. I have found that when it goes above 70 C it starts getting unstable. I throttled the FSB back to 157MHz and it does not get to 70 C any more. In normal operation it never gets above 60 C, so I don't know why the slideshow takes so much CPU power

Problems with mac book pro (os x 10.5.8)

g'day
recently i have, for me serious, problems with my mac book pro (os x 10.5.8).
discovered that it runs slower and somewhat unstable, i attempted housekeeping and burned large files on cd. furthermore i deleted some files i do not use to trash from 'application'
now once i turn on straight i get a garbled screen with tool bar on top.
if i start with installation disk 1, i get to the complete start-up and is operational.
upon opening the 'dock' to open safari for example - comuter freezes for a few minutes with spinning rainbow wheel.
what might be the problem?
did run
- safe start-up - no change
- disk utility - all ok
- hardware test - all ok
- extended hadrware test - did not work
- activity monitor - cpu - user 16%, sstem 4%, indle 87%
- system memory (2 gb) - free 850 mb, wired 172 mb, active 970 mb, inactive 51 mb
- disk usage (185 gb) - 135 gb used - 50 gb free
what else can i do? anone encountered similar?
would truly appreciate our kind assistance
thanks a lot
ursfsta

"did try to repair disk but it allowed me only to 'verify'"
You did not follow my post.
Insert your OS installer disk and reboot while holding down the c key. Select Utilities>Disk Utilities. Then run Repair Disk on your ard drive.

Problem with Time Capsule after upgrading to firmware 7.6.1

I am currently using Time Capsule Firmware 7.6 and just upgraded to 7.6.1. After the upgrade, my IPad 2 cannot access iTune, App Store and Safari cannot access any web-site. Email and other Apps which require Internet access have no problem with connection. My other Apple devices like iPhone and Mac Pro have no problem with Internet access and can access App Store, and Safari can access web site as normal.
I tried to downgrade the Firmware back to 7.6. After the downgrade, iPad 2 can now access iTune and App Store. However, Internet access via Ipad 2 is very slow, at only 1M download and 0.2M upload Internet speed. The same issue occur with my other iPad 1 too. When I check Internet speed on iPhone 4 and Mac Pro, the result is normal, at 25M download internet speed.
Please let me know how I can resolve this problem.

I just read other discussion treads on Time Capsule Firmware upgrade to 7.6.1. It seems the whole community is having the same issue ie slow Internet connection speed and even some users are reporting unstable connection. If Apple is reading these treads, Apple should do something to either stop allowing the Firmware upgrade to 7.6.1 or rectify the issue with another Firmware upgrade without this problem.
If Apple has read and is not taking any action, then, we all should question what exactly is the management hired for?

Problem with CPU Voltage

Hello
I build new PC with:
i5-760
Noctua NH-D14
MSI P55-GD65
G.Skill 2x2GB CL7 ECO
Antec TruePower New 750W TP-750
TwinTech GF 9600GT
I have problem with CPU voltage as even when I set it for example to 1.201v in bios, under load it overshot to 1.256-1268. The best is when I oc`ed cpu to 4GHZ and set voltage in bios for 1.30v it overshot for 1.45v+! Not to mention that temps are skyhigh from that. It doesn`t matter if I try to put BIOS Vcore on 1.1v on stock because under load it still rise to 1.16. I turned off all eist, c-state, turbo boost, phase led and switch phase, set vdrop to low and still something is wrong here. I updated the bios under dos from USB stick to newest 1.9 version in order to update CPU micro code without error and it not helped. I want to know is that even possible to fix or should I RMA MB or CPU.
Minor problem is with sysfans as they power on for a second and turn off instantly to start working again when I see list on devices in post. After rebot when my monitor is switched off it takes something like 5 sec to power monitor on and another 5 to show bios, is that normal?

I have similar issues, it's hard to tell which measurement is the most accurate, there are 2 different measurements in the control center that don't match up with the figures set in the bios. The only way to be sure would be to get an expensive accurate multimeter but If you're only interested in running a stable overclocked computer without knowing the exact figures then get the computer running stable and lower the voltages until it starts to become unstable with prime95,
Or you could work the other way round, set the voltages so it boots but doesn't run prime95 for long, then raise the vcore and vtt one at a time until your happy with the length of time prime95 runs without errors. I'd be happy with 24 hours, I seem to remember errors creeping in at around the 9 hour mark on the setting below what I have it set to now.

Problem with madwifi

I've change recently my system form Gentoo to ArchLinux. I can't revert it because backups are few tousends km from me. I have problems with connecting to my campus WiFi(open; no WPA; no WEP) network:
- scanning ath0 sometimes discover 4 hotspots of this network and 2 others sometimes nothing
- dhcpcd just timeout. If I connect from computer's room by cable(now) it's ok.
What's wrong? I've tried standard connecting, wpa_supplicant and networkmanager.

Yes but it's rather temporary solution as far as I understend (I'll check it carefully - now I'm attached to cable and have to use it as long as possible ). After august weeks I'll have to manage suspend + 2 WiFi networks - in such case the only solution would be change distro(for example back to Gentoo).
Unfortunatly putting essid's in config is not a solution - I'd have to change it twice a day.

Mixing in Logic, problems with levels!

Mixing problem here: I can’t figure out how to get all my equipment/ software levels correct to get an accurate level/ sound. I use Logic Pro 7 on a Mac dual G5, my sound card is MOTU and my monitors (2) are Event 20/20 BAS. Here’s the problem I believe that something is too low and I am compensating in the somewhere else and I am getting distortion in my mix downs- but I can barely hear the song. Here are my levels/ gains:
Logic Main Mixdown track: 0.0 dB
MOTU Main out: -34 db
Event Monitors input level: 7 (max is 10)
My plug-ins and such are at the level that I load them at, I don’t mess with the gains on these too much.
Should I turn something down and turn something else up so that I can actually mix correctly? Thank you for your help!
Cappy

Hi.
I have the same problem as you. I have a dual 2.7 G5 mac using a PCI MOTU 424 with a 2408 mk3 interface. Before I updated my Logic software to 7.2, The audio seemed to work fairly deccently as far as levels. I even utilize a Presonus Digimax LT via adat pipeline into the MOTU which in the past has worked great to attenuate levels digitally and Logic and MOTU worked seemlessly BUT ever since the new intel revolution, I have noticed tons of problems with the universal version of Logic. So far I would say maybe at least 30 features doesn't work properly anymore with Logic 7.2 and 7.2.1. Seems like with each new updates, the version gets worse and worse with more problems for my G5 mac. Example, Bouncing audio. Several of my settings such as plugins, levels, crossfades getting skipped or ignored and at times even crashes. I also have other issues like cracks and pops in my audio recordings lately which really is beginning to **** me off to no end. My adat transfered audio has weird pops added to the audio when transfered digitally which it didn't do before. I also noticed several playback functions that are very unstable. Some of my song files wont even play back!! My levels are no longer accurate anymore when recording in Logic. I have to crank my presonus levels just to barely hear my guitar tracks being recorded which I didn't have to do in previous versions, which also means more hisses and noises added. Apple seriously needs to correct these issues with Logic especially when we have to pay for bad updates.
Scary thing is Logic 7.2.1 seems to run much smoother using the built in audio on my 2.0 intel macbook than my dual 2.7 G5 with my MOTU gear.

Problem with wpa_supplicant unstable

Similar Messages

Maybe you are looking for