Problem with XML lib Conflicts and security policies

I am getting this error when trying to run (it deploys fine) a web application that uses hibernate. The same application deploys and runs fine in tomcat. However, I need to find a way to configure the sun application server so it will work. I have attached the stack trace below. Any help would be greatly appreciated....heck a starting point would be greatly appreciated.
exception
javax.servlet.ServletException: Provider org.apache.crimson.jaxp.DocumentBuilderFactoryImpl could not be instantiated: java.lang.SecurityException: unable to instantiate Subject-based policy
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:218)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:861)
     sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:324)
     org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:246)
     java.security.AccessController.doPrivileged(Native Method)
     javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
     org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:268)
     org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:162)
     java.security.AccessController.doPrivileged(Native Method)
     java.security.AccessController.doPrivileged(Native Method)
     com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:322)
     com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:147)
     com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87)
     com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
     com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
     javax.faces.webapp.FacesServlet.service(FacesServlet.java:198)
     sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:324)
     org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:246)
     java.security.AccessController.doPrivileged(Native Method)
     javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
     org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:268)
     org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:162)
root cause
javax.xml.parsers.FactoryConfigurationError: Provider org.apache.crimson.jaxp.DocumentBuilderFactoryImpl could not be instantiated: java.lang.SecurityException: unable to instantiate Subject-based policy
     javax.xml.parsers.DocumentBuilderFactory.newInstance(DocumentBuilderFactory.java:99)
     org.apache.jasper.xmlparser.ParserUtils.parseXMLDocument(ParserUtils.java:99)
     org.apache.jasper.compiler.JspConfig.processWebDotXml(JspConfig.java:72)
     org.apache.jasper.compiler.JspConfig.init(JspConfig.java:181)
     org.apache.jasper.compiler.JspConfig.findJspProperty(JspConfig.java:233)
     org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:164)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:419)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:402)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:512)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:262)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:263)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:210)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:861)
     sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:324)
     org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:246)
     java.security.AccessController.doPrivileged(Native Method)
     javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
     org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:268)
     org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:162)
     java.security.AccessController.doPrivileged(Native Method)
     java.security.AccessController.doPrivileged(Native Method)
     com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:322)
     com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:147)
     com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87)
     com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
     com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
     javax.faces.webapp.FacesServlet.service(FacesServlet.java:198)
     sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:324)
     org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:246)
     java.security.AccessController.doPrivileged(Native Method)
     javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
     org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:268)
     org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:162)

If I comment out the calls to Hibernate from my code, the error changes a little. So, it must be one of the libraries in the web-inf/lib dir. I have appended the new stack trace and a list of jars i that directory....got any ideas about the culprit??? I'll start the trial and error process....but if anyone knows i would appreciate it.
LES
exception
javax.servlet.ServletException: com.sun.security.auth.PolicyFile
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:218)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:861)
     sun.reflect.GeneratedMethodAccessor75.invoke(Unknown Source)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:324)
     org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:246)
     java.security.AccessController.doPrivileged(Native Method)
     javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
     org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:268)
     org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:162)
     java.security.AccessController.doPrivileged(Native Method)
     java.security.AccessController.doPrivileged(Native Method)
     com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:322)
     com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:147)
     com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87)
     com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
     com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
     javax.faces.webapp.FacesServlet.service(FacesServlet.java:198)
     sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:324)
     org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:246)
     java.security.AccessController.doPrivileged(Native Method)
     javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
     org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:268)
     org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:162)
root cause
java.lang.IncompatibleClassChangeError: com.sun.security.auth.PolicyFile
     org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1273)
     org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1233)
     java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
     java.lang.Class.forName0(Native Method)
     java.lang.Class.forName(Class.java:219)
     javax.security.auth.Policy$3.run(Policy.java:215)
     java.security.AccessController.doPrivileged(Native Method)
     javax.security.auth.Policy.getPolicyNoCheck(Policy.java:209)
     javax.security.auth.Policy.getPolicy(Policy.java:179)
     javax.security.auth.SubjectDomainCombiner$2.run(SubjectDomainCombiner.java:178)
     java.security.AccessController.doPrivileged(Native Method)
     javax.security.auth.SubjectDomainCombiner.combine(SubjectDomainCombiner.java:174)
     java.security.AccessControlContext.goCombiner(AccessControlContext.java:386)
     java.security.AccessControlContext.optimize(AccessControlContext.java:310)
     java.security.AccessController.checkPermission(AccessController.java:400)
     java.lang.SecurityManager.checkPermission(SecurityManager.java:524)
     java.lang.SecurityManager.checkRead(SecurityManager.java:863)
     java.io.File.lastModified(File.java:771)
     org.apache.naming.resources.FileDirContext$FileResourceAttributes.getLastModifiedDate(FileDirContext.java:1123)
     org.apache.naming.resources.ResourceAttributes.get(ResourceAttributes.java:706)
     org.apache.naming.resources.DirContextURLConnection.getLastModified(DirContextURLConnection.java:211)
     org.apache.jasper.compiler.Compiler.isOutDated(Compiler.java:474)
     org.apache.jasper.compiler.Compiler.isOutDated(Compiler.java:450)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:510)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:262)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:263)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:210)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:861)
     sun.reflect.GeneratedMethodAccessor75.invoke(Unknown Source)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:324)
     org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:246)
     java.security.AccessController.doPrivileged(Native Method)
     javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
     org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:268)
     org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:162)
     java.security.AccessController.doPrivileged(Native Method)
     java.security.AccessController.doPrivileged(Native Method)
     com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:322)
     com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:147)
     com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87)
     com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
     com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
     javax.faces.webapp.FacesServlet.service(FacesServlet.java:198)
     sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:324)
     org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:246)
     java.security.AccessController.doPrivileged(Native Method)
     javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
     org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:268)
     org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:162)
List of Jars in WEB-INF/lib
ant-1.5.3.jar           jaas.jar            junit-3.8.1.jar
ant-optional-1.5.3.jar jboss-cache.jar     les-util.jar
c3p0-0.8.4.5.jar        jboss-common.jar    log4j-1.2.8.jar
cglib-full-2.0.2.jar    jboss-jmx.jar       odmg-3.0.jar
concurrent-1.3.3.jar    jboss-system.jar    oscache-2.0.jar
connector.jar           jcs-1.0-dev.jar     proxool-0.8.3.jar
dom4j-1.4.jar           jdbc2_0-stdext.jar swarmcache-1.0rc2.jar
ehcache-0.9.jar         jgroups-2.2.7.jar
hibernate2.jar          jta.jar

Similar Messages

Problem with whitespace then loading and saving xml

i do not know how to handle this problem. i modifed a texteditor to send XML to a server and load XML back to the container.
but then i do changes to the Textlayout it shows up like this --->
Text in Container not modifed
Text in Container modifed ---> with space beween the colorchanged string
Text inContainersend and loaded ---> i think this has something to to with the
TextFilter.export(_textFlow,TextFilter.TEXT_LAYOUT_FORMAT,ConversionType.XML_TYPE)
can someone give me a hint...

Hi,
the link is --->
http://www.horstmann-architekten.de/contentmanagment/SimpleEditor.html
its a modified example of the texteditor provided by Adobe. You can send a xml to the server. and also read it from the server. You just use the xml identifer to give the xml a name.
Try it out:
1. change the text and
2. give a XML-Identifer
   and then send it to the server. --> send to server
3. type in the XML-Identifer you have used and
4.   load it from the server ---> Load from Server Button
evering works ok exept the columns formating.
I Think the colums Formating is not embeded in the XML as it should be. I attached the Files. (Newbie programmer)
With best regards
Michael Sprinzl
--- robin.briggs <[email protected]> schrieb am Do, 17.9.2009:
Von: robin.briggs <[email protected]>
Betreff: Problem with whitespace then loading and saving xml
An: "Michael sprinzl" <[email protected]>
Datum: Donnerstag, 17. September 2009, 2:12
Sounds like you have two different issues going on: (1) inline graphics aren't coming out correctly when you use the TextLineFactory, and (2) columns aren't working correctly. It's difficult for me to tell by looking at the application you link what is going wrong. One of the examples does seem to have columns working -- can you be more specific about what you're doing, and what results you are seeing? As for the inline graphics, there is a timing issue involved with using URLs, due to the asynchronous loading. See this comment in the docs for TextFlowTextLineFactory:
Note: When using inline graphics, the source property of the InlineGraphicElement object   must either be an instance of a DisplayObject or a Class object representing an embedded asset.   URLRequest objects cannot be used. The width and height of the inline graphic at the time the line   is created is used to compose the flow.
- robin

Problems with Cocoon 2.03 and Weblogic 6.1 SP3

I am having problems with Cocoon 2.03 and Weblogic 6.1 SP3, when I try to deploy
the cocoon.war.
Cocoon works fine when I unpack the cocoon.war into ...\mydomain\applications
(after I changed cocoon.xconf to use the following transformer factory: org.apache.xalan.processor.TransformerFactoryImpl).
However, when I deploy the cocoon.war through the weblogic console and try to
invoke cocoon (http://localhost:7001/cocoon/) I get the following error:
ERROR (2002-09-26) 11:28.40:859 [sitemap] (/cocoon/) ExecuteThread: '7' for
queue: 'default'/Handler: Error compiling sitemap
java.util.zip.ZipException: The system cannot find the file specified
     at java.util.zip.ZipFile.open(Native Method)
     at java.util.zip.ZipFile.<init>(ZipFile.java:110)
     at java.util.zip.ZipFile.<init>(ZipFile.java:125)
     at weblogic.utils.zip.ZipURLConnection.getInputStream(Handler.java:49)
     at org.apache.cocoon.components.source.URLSource.getInputStream(URLSource.java:151)
     at org.apache.cocoon.components.source.URLSource.getInputSource(URLSource.java:223)
     at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.generateResource(ProgramGeneratorImpl.java:318)
     at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.createResource(ProgramGeneratorImpl.java:282)
     at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.load(ProgramGeneratorImpl.java:196)
     at org.apache.cocoon.sitemap.Handler.run(Handler.java:228)
     at java.lang.Thread.run(Thread.java:484)
I understood that there were problems when the cocoon.war file that did occur
when you unpacked the war, but I believed that these problems did not occur with
WLS6.1 SP3.
Has anyone else encountered this problem and solved it? Any help would be greatly
appreciated.
Thanks in advance.
Paul

This how I got Cocoon 2.04 up and running on WLS 6.1.4
Download the Cocoon source from http://xml.apache.org/cocoon/dist/
Remove all but the following JARs from lib/optional:
commons-jxpath-1.0.jar
jing-20020724.jar
resolver-20020130.jar
servlet_2_2.jar
commons-logging-1.0.jar
jtidy-04aug2000r7-dev.jar
rhino-1.5r3.jar
xt-19991105.jar
Update lib/jars.xml to reflect these changes
Issue build commands:
./build.sh clean (Note: Always clean first!)
./build.sh -Dinclude.webapp.libs=yes -Dexclude.webapp.samples=yes -Dexclude.webapp.documenation=yes
-Dexclude.webapp.javadocs=yes webapp
Copy the following JARs to your WLS instance’s lib directory:
xercesImpl-2.0.0.jar
xml-apis.jar
xalan-2.3.1.jar
xt-19991105.jar
java/lib/tools.jar
Sample of config/SERVER_NAME.setenv
LIB=/path/to/lib
JARS=$LIB/xercesImpl-2.0.0.jar:$LIB/xml-apis.jar:$LIB/xalan-2.3.1.jar:$LIB/xt-19991105.jar:/opt/java1.3/lib/tools.jar
JAVACLASSPATH=$JARS:.:$JAVACLASSPATH
JAVA_HOME=/opt/java1.3
Deploy the resluting cocoon.war and you should have a Cocoon up and running that
can do the XML->HTML Hello World sample. The status page works fine too.
My advice is to launch this stripped configuration first and if needed add more
features later by adding the JARs of your choice to the class path (or add the
to your webapp-build if you are confident that WLS are capable of handling their
manifests).
Good luck
/Peter
"Paul Petley" <[email protected]> wrote:
>
>
I am having problems with Cocoon 2.03 and Weblogic 6.1 SP3, when I try
to deploy
the cocoon.war.
Cocoon works fine when I unpack the cocoon.war into ...\mydomain\applications
(after I changed cocoon.xconf to use the following transformer factory:
org.apache.xalan.processor.TransformerFactoryImpl).
However, when I deploy the cocoon.war through the weblogic console and
try to
invoke cocoon (http://localhost:7001/cocoon/) I get the following error:
ERROR (2002-09-26) 11:28.40:859 [sitemap] (/cocoon/) ExecuteThread:
'7' for
queue: 'default'/Handler: Error compiling sitemap
java.util.zip.ZipException: The system cannot find the file specified
     at java.util.zip.ZipFile.open(Native Method)
     at java.util.zip.ZipFile.<init>(ZipFile.java:110)
     at java.util.zip.ZipFile.<init>(ZipFile.java:125)
     at weblogic.utils.zip.ZipURLConnection.getInputStream(Handler.java:49)
     at org.apache.cocoon.components.source.URLSource.getInputStream(URLSource.java:151)
     at org.apache.cocoon.components.source.URLSource.getInputSource(URLSource.java:223)
     at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.generateResource(ProgramGeneratorImpl.java:318)
     at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.createResource(ProgramGeneratorImpl.java:282)
     at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.load(ProgramGeneratorImpl.java:196)
     at org.apache.cocoon.sitemap.Handler.run(Handler.java:228)
     at java.lang.Thread.run(Thread.java:484)
I understood that there were problems when the cocoon.war file that did
occur
when you unpacked the war, but I believed that these problems did not
occur with
WLS6.1 SP3.
Has anyone else encountered this problem and solved it? Any help would
be greatly
appreciated.
Thanks in advance.
Paul

Problem with XML on Linux

hi everybody,
I've a big problem with XML on Linux, in details I see my program stopping on Linux at the instruction
XMLReader xr = XMLReaderFactory.createXMLReader("org.apache.crimson.parser.XMLReaderImpl");
and it's strange because on Windows it runs and there aren't problems about permissions on files, does anyone knows what to do?
thanks in advance!
Stefano

What happens on that line? I'm assuming you get some kind of error or exception.
Make sure the JAR file for Crimson is in your classpath.

Problem with XML in APEX ORA-06502

i, I have a problem with XML generation, I developed an application in APEX, and in a html page I have this process:
declare
l_XML varchar2(32767);
begin
select xmlElement
"iva",
xmlElement("numeroRuc",J.RUC),
xmlElement("razonSocial", J.RAZON_SOCIAL),
xmlElement("idRepre", J.ID_REPRE),
xmlElement("rucContador", J.RUC_CONTADOR),
xmlElement("anio", J.ANIO),
xmlElement("mes", J.MES),
xmlElement
"compras",
select xmlAgg
xmlElement
"detalleCompra",
--xmlAttributes(K.ID_COMPRA as "COMPRA"),
xmlForest
K.COD_SUSTENTO as "codSustento",
K.TPLD_PROV as "tpldProv",
K.ID_PROV as "idProv",
K.TIPO_COMPROBANTE as "tipoComprobante",
to_char(K.FECHA_REGISTRO, 'DD/MM/YYYY') as "fechaRegistro",
K.ESTABLECIMIENTO as "establecimiento",
K.PUNTO_EMISION as "puntoEmision",
K.SECUENCIAL as "secuencial",
to_char(K.FECHA_EMISION, 'DD/MM/YYYY') as "fechaEmision",
K.AUTORIZACION as "autorizacion",
to_char(K.BASE_NO_GRA_IVA, 9999999999.99) as "baseNoGraIva",
to_char(K.BASE_IMPONIBLE, 9999999999.99) as "baseImponible",
to_char(K.BASE_IMP_GRAV, 9999999999.99) as "baseImpGrav",
to_char(K.MONTO_ICE, 9999999999.99) as "montoIce",
to_char(K.MONTO_IVA, 9999999999.99) as "montoIva",
to_char(K.VALOR_RET_BIENES, 9999999999.99) as "valorRetBienes",
to_char(K.VALOR_RET_SERVICIOS, 9999999999.99) as "valorRetServicios",
to_char(K.VALOR_RET_SERV_100, 9999999999.99) as "valorRetServ100"
xmlElement
"air",
select xmlAgg
xmlElement
"detalleAir",
xmlForest
P.COD_RET_AIR as "codRetAir",
to_char(P.BASE_IMP_AIR, 9999999999.99) as "baseImpAir",
to_char(P.PORCENTAJE_AIR, 999.99) as "porcentajeAir",
to_char(P.VAL_RET_AIR, 9999999999.99) as "valRetAir"
from ANEXO_COMPRAS P
where P.ID_COMPRA = K.ID_COMPRA
AND P.ID_INFORMANTE_XML = K.ID_INFORMANTE_XML
xmlElement("estabRetencion1", K.ESTAB_RETENCION_1),
xmlElement("ptoEmiRetencion1", K.PTO_EMI_RETENCION_1),
xmlElement("secRetencion1", K.SEC_RETENCION_1),
xmlElement("autRetencion1", K.AUT_RETENCION_1),
xmlElement("fechaEmiRet1", to_char(K.FECHA_EMI_RET_1,'DD/MM/YYYY')),
xmlElement("docModificado", K.DOC_MODIFICADO),
xmlElement("estabModificado", K.ESTAB_MODIFICADO),
xmlElement("ptoEmiModificado", K.PTO_EMI_MODIFICADO),
xmlElement("secModificado", K.SEC_MODIFICADO),
xmlElement("autModificado", K.AUT_MODIFICADO)
from SRI_COMPRAS K
WHERE K.ID IS NOT NULL
AND K.ID_INFORMANTE_XML = J.ID_INFORMANTE
AND K.ID BETWEEN 1 AND 25
).getClobVal()
into l_XML
from ANEXO_INFORMANTE J
where J.ID_INFORMANTE =:P3_MES
and J.RUC =:P3_ID_RUC
and J.ANIO =:P3_ANIO
and J.MES =:P3_MES;
--HTML
sys.owa_util.mime_header('text/xml',FALSE);
sys.htp.p('Content-Length: ' || length(l_XML));
sys.owa_util.http_header_close;
sys.htp.print(l_XML);
end;
Now my table has more than 900 rows and only when I specifically selected 25 rows of the table "ANEXO_COMPRAS" in the where ( AND K.ID BETWEEN 1 AND 25) the XML is generated.+
I think that the problem may be the data type declared "varchar2", but I was trying with the data type "CLOB" and the error is the same.+
declare
l_XML CLOB;
begin
--Oculta XML
sys.htp.init;
wwv_flow.g_page_text_generated := true;
wwv_flow.g_unrecoverable_error := true;
--select XML
select xmlElement
from SRI_COMPRAS K
WHERE K.ID IS NOT NULL
AND K.ID_INFORMANTE_XML = J.ID_INFORMANTE
).getClobVal()
into l_XML
from ANEXO_INFORMANTE J
where J.ID_INFORMANTE =:P3_MES
and J.RUC =:P3_ID_RUC
and J.ANIO =:P3_ANIO
and J.MES =:P3_MES;
--HTML
sys.owa_util.mime_header('text/xml',FALSE);
sys.htp.p('Content-Length: ' || length(l_XML));
sys.owa_util.http_header_close;
sys.htp.print(l_XML);
end;
The error generated is ORA-06502: PL/SQL: numeric or value error+_
Please I need your help. I don`t know how to resolve this problem, how to use the data type "CLOB" for the XML can be generate+

JohannaCevallos07 wrote:
Now my table has more than 900 rows and only when I specifically selected 25 rows of the table "ANEXO_COMPRAS" in the where ( AND K.ID BETWEEN 1 AND 25) the XML is generated.+
I think that the problem may be the data type declared "varchar2", but I was trying with the data type "CLOB" and the error is the same.+
The error generated is ORA-06502: PL/SQL: numeric or value error+_
Please I need your help. I don`t know how to resolve this problem, how to use the data type "CLOB" for the XML can be generate+The likeliest explanation for this is that length of the XML exceeds 32K, which is the maximum size that <tt>htp.p</tt> can output. A CLOB can store much more than this, so it's necessary to buffer the output as shown in +{message:id=4497571}+
Help us to help you. When you have a problem include as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
And always post code wrapped in <tt>\...\</tt> tags, as described in the FAQ.
Thanks

Intermittent proxy error "There is a problem with the proxy server's security certificate. Outlook is unable to connect to the proxy server "

Hi all,
From time to time (at least once a day), the following message pops up on the user's screen:
"There is a problem with the proxy server's security certificate. Outlook is unable to connect to the proxy server . Error Code 80000000)."
If we click "OK" it goes away and everything continues to work although sometimes Outlook disconnects. It is quite annoying...
Any ideas?
Thank you in advance

Hi,
For the security alert issue, I'd like to recommend you check the name in the alert windows, and confirm if the name is in your certificate.
Additionally, to narrow down the cause, when the Outlook client cannot connect again, I recommand you firstly check the connectivity by using Test E-mail AutoConfiguration. For more information, you can refe to the following article:
http://social.technet.microsoft.com/Forums/en-US/54bc6b17-9b60-46a4-9dad-584836d15a02/troubleshooting-and-introduction-for-exchange-20072010-autodiscover-details-about-test-email?forum=exchangesvrgeneral
Thanks,
Angela Shi
TechNet Community Support

There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site "Mailserver"

Good day Guys
First of all I am not an Exchange Expert, and I might be asking a very stupid question, but please bare with me. :)
While I was on leave our Mail server fell over and The company got a Specialist to help out for the time being.
We where\are on Microsoft Exchange 2007 , which Fell over, and the specialist was able to recover as much data as he could.
They then installed Exchange 2013 and tried to migrate everything from 2007 to 2013 and not everything migrated over.
But the problem is, Outlook Anywhere was enable on 2007 and worked a 100% (before the disaster)
With Exchange 2013 I get the following error message when trying to connect With Outlook 2013, using an external connection:
"There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site "Mailserver"
Outlook is unable to connect to the Proxy server. (Error Code 0)"
Has anyone had the Similar when migrating over from 2007 to 2013 or is this an Issue on IIS and nothing to do with Exchange migration?
Your assistance will be greatly appreciated.

Hi,
Firstly, I would suggest we use Exchange 2013 FE as the Outlook Anywhere proxy server.
For the certificate issue, it mostly occurs because the host name that Outlook are trying to access does not match the certificate SAN. Please check with this point. If they do not match, you
can change the host name by referring to the following article:
https://support.microsoft.com/kb/940726/en-us?wa=wsignin1.0
Thanks,
Simon Wu
TechNet Community Support

I have a problem with nokia c700 (forget the secur...

I have a problem with nokia c700 (forget the security code). I can't open my phone and can't check my imei... bored. Please help me restore my security code. Thank you so much.
Life is fun!

There is no other way than to get it reset thru' Nokia Care . A proof of ownership (Bill / Invoice) may be asked ...

I am facing a new problem with xml schema, plz help me

Hi @,
I am facing a problem with xml schema validation. Below is my code.
public void initialize(String cfgFileName) {
try {
try {
DOMParserWrapper parser = (DOMParserWrapper)Class.forName("dom.wrappers.DOMParser").newInstance();
parser.setFeature( "http://apache.org/xml/features/dom/defer-node-expansion",true );
parser.setFeature( "http://xml.org/sax/features/validation",true);
parser.setFeature( "http://xml.org/sax/features/namespaces",true );
parser.setFeature( "http://apache.org/xml/features/validation/schema",true );
parser.setFeature( "http://apache.org/xml/features/validation/schema-full-checking",true );
Document document = parser.parse(cfgFileName);
System.out.println("Vijay .. code .. damar\n");
}catch (org.xml.sax.SAXParseException spe) {
} catch (org.xml.sax.SAXNotRecognizedException ex ){
} catch (org.xml.sax.SAXNotSupportedException ex ){
} catch (org.xml.sax.SAXException se) {
if (se.getException() != null)
se.getException().printStackTrace(System.err);
else
se.printStackTrace(System.err);
}catch (Exception e) {
System.out.println("Caught unknown exception : \n");
e.printStackTrace(System.err);
System.out.println("Vijay .. code .. success\n");
DocumentBuilderFactory docBuilderFactory = DocumentBuilderFactory.newInstance();
DocumentBuilder docBuilder = docBuilderFactory.newDocumentBuilder();
//docBuilder.setErrorHandler(myErrorHandler);
cfg = docBuilder.parse(new File(cfgFileName));
cfg .getDocumentElement ().normalize ();
} catch (Exception e) {
e.printStackTrace();
In the above code I am parsing the xml file and i am doing schema validation. Schema validation is proper and it is validating correctly. Only problem is that, It is validating and showing error correctly correctly but it is not catching that error.
For clear understanding I am printing one statement before parsing and after parsing.
SYSTEM.OUT.PRINTLN("Vijay .. code .. damar\n") this is before parsing
SYSTEM.OUT.PRINTLN("Vijay .. code .. success\n") this is after parsing
Here what is happening means, It is validating correctly and showing error :
[Error] nw_layout-new.xml:800:97: Datatype error: Value 'y' does not match regular expression facet 'yes|no'..
Vijay .. code .. damar
Vijay .. code .. success
Here it is showing error and still continueing not catching.
Plz give solution for this.
Thanks
vijay K

Hello dipthebe,
Check out the articles below go through troubleshooting steps for your iPhone when the screen is unresponsive. You may want to try and restore your iPhone as a new device and then test out what happens when you miss a call to see if the issue is still present afterwards.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Regards,
-Norm G.

Anyone else having problems with popups since the new security upgrade? can't get rid of them

anyone else having problems with popups since the new security upgrade? can't get rid of them

You may have inadvertently installed adware. You do not need to download or install anything to fix it. It ought not to be related to any Apple security update.
For a description of how this may have occurred, how to avoid it in the future, and for Apple's recommended actions read How to install adware. Apple's instructions are linked in the Recovery Procedure near the end of that document. Read and follow them carefully. Pay particular attention to the easily overlooked passages directing you to restart your Mac when required.

I downloaded a new version of firefox. It said it had problems with my norton toolbar and now it doesn't feature it in the window. I'm not that comp savvy. How do I either get the Norton toolbar up or go back to the old firefox? Thank you.

I downloaded a new version of firefox. It said it had problems with my norton toolbar and now it doesn't feature it in the window. I'm not that comp savvy. How do I either get the Norton toolbar up or go back to the old firefox? Thank you.

Please authorize ADE 3 with same credentials that you used with older version of ADE

After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!

After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!
iTunes is a mess! It couldn't find it's own libraries and I was forced to create a new one. Now I don't know where my music is or if any's missing.

columbus new boy wrote:
How crap is that?
It's not crap at all.
It's not that simple. For example, I've 3500 songs on my MacBook but don't want them all on my phone, so I have to manually select each song again???
There has to be a solution.
Why not simply make a playlist with the songs you want on the iPhone?
and maintain a current backup of your computer.

Custom action with XML type input and output parameter.

Hi,
I want to develop custom action with xml type input and/or output parameter.
Is there sample code for java side. How is the definition of input and/or output parameter and set/get methods?
does it need special .jar file to develop custom action like this?
Thanks.

Cemil - yes, you can use XML data types. Use the class
com.sap.lhcommon.xml.XMLDataType
for your parameter type. Here is a snippet from a custom action we use to log XML (instead of just returning the #text node like the default logger does):
public class XMLLogger extends ActionReflectionBase
    private String source;
    private String eventType;
    private String textMessage;
    private XMLDataType xmlMessage;
    public XMLLogger()
        log = new Logger("UserLog");
        source = DEFAULT_SOURCE;
        eventType = TYPE_INFO;
        textMessage = "";
        xmlMessage = new XMLDataType();
    public XMLDataType getXmlMessage()
        return xmlMessage;
    public void setXmlMessage(XMLDataType xmlMessage)
        this.xmlMessage = xmlMessage;
    public void Invoke(Transaction transaction, ILog ilog)
        StringBuffer sb = new StringBuffer();
        sb.append('[');
        sb.append(source);
        sb.append("] ");
        sb.append(textMessage);
        sb.append(XMLUtils.convertXmlToString(xmlMessage));
XMLUtils is a helper class we wrote - it's just a bunch of standard Java XML boilerplate code. The important part you need to know is XMLDataType.getDocument() will return an org.w3c.dom.Document.
I hope that was enough information to help.
-tim

I tried downloading a free app and it asked for my billing information and when i entered it, it says that there was a billing problem with a previoud purchase and i have to update it. I keep updating it and it wont let me verify it and i cant get apps

I tried downloading a free app and it asked for my billing information and when I entered it, it said that there was a billing problem with a previous purchase and I have to update it. I keep updating it and it wont let me verify it and I cant get any apps even if they are free, and I just Deleted some apps to make room for my new upate!

The message says: "The payment method has been denied, try another method"
I'm living in the same country and city since I was born, so I don't think the location is the problem.
And yes, I paid with the card a meal in Burguer King today. And nothing more.

HT3552 I have been trying to download apps from the app store and every time it tells me there is a problem with my previous billing and direct me to put in new billing information and every time i do that it still will not let me download any apps.

I have been trying to download apps from the app store and every time it tells me there is a problem with my previous billing and direct me to put in new billing information and every time i do that it still will not let me download any apps.

Have a look here > http://support.apple.com/kb/TS1646

Problem with XML lib Conflicts and security policies

Similar Messages

Maybe you are looking for