Problem : "You cannot convert the character set"..Any suggestions?

Hi All,
I have this character inside my internal table, KOÇTAŞ YAPI MARK.TİC A.Ş. and it created a short dump on the program and it says "You cannot convert the character set". But this customer is already maintained inside the table KNA1..
The code is like this one:
REPLACE ALL OCCURRENCES OF '' IN linebuffer WITH 'EUR'.
TRANSFER linebuffer TO filename. "LENGTH bytes_to_transfer.
the LINEBUFFER here is an internal table.
I think conversion is the key here. Do anyone knows how to convert this thing? Or is it the Unicode system? Could someone please help me to my problem?
Thanks so much guys!
Regards,
Mackoy

Hi,
What i feel here is you are trying to pass totla internal table at once.Internal table may have more than one record.Filename may string which can contain one row.
So instead of that put the internal table into LOOP.
DATA : v_string(200).
LOOP AT LINEBUFFER.
Here your internal table may have non char data type.That is the
main problem.
Note : while concatenating all non char fields of LINEBUFFER
should move to first to temporary char field and conatenate it
CONCATENATE LINEBUFFER-field1 LINEBUFFER-field2
INTO v_string.
ENDLOOP.

Similar Messages

Big Permissions Problem: "You Cannot Change The Contents Of This Folder"

I installed Tiger some time ago (and need to upgrade now from 10.4.6 to 10.4.9).
I haven't used it much since some of my software will only run under Panther.
In any case, I'm using it now and have been having big permissions/user accounts problems.
I have two users on the computer "robert" and "ra", both with admin privileges (I set up two because I was trying to get around these problems -- I'd be very happy with just one).
I have 10.4.6 installed on an external HD and boot from that into Tiger (I have Tiger on another external HD as a backup, and my main HD in the iMac has 10.3.9 -- that's what I boot from when I need to run older programs).
In any case, both "robert" and "ra" have ADMIN privileges. But I get weird ownership problems. For instance, if I am logged in as "ra" and try to play a Realplayer file streaming from the web (in Firefox 1.x), I get the error
/Users/robert/Desktop/307e6wz7 could not be saved, because you cannot change the contents of that folder.
I check the ownership of the "Desktop" folder -- read/write for "ra".
If I right-click I can save the Realplayer file to the desktop.
Same with other links.
I've also noticed other ownership problems (blocked folders at finder level) but can't duplicate tonight. Is this an obscure error, or is there something amiss in ownership recognition? Is there some way I can sort all out? Login in as "root" and set all right?
Thanks
G4 iMac Mac OS X (10.4.6)

Yes they do. When you installed them you dragged these particular apps to the Applications folder. Doing so automatically attributes the program with the ownership attributes of the account owner who installed them - 'robert.'
Proper application installers install apps under the system/admin ownership. You can try to fix these apps by changing their permissions:
Select the app and CTRL-click to open the contextual menu. Choose Show Package Contents from the contextual menu. Select the Contents folder and press COMMAND-I to open the Get Info window. In the Ownership and Permissions section click on the tiny arrow icon to expose the panel. Click on the little lock icon to authenticate. Change permissions as follows:
Owner = system with Read/Write privileges
Group = admin with Read/Write privileges
Other with Read-Only privileges
Click on the Apply To Enclosed Items button. Close the lock by clicking again on the lock icon.

Changing the character set in RoboHelp 7 file converted from 5

The character set of the output files for WinHelp defaults to
utf-8. How can the default be set to windows-1252 per project or
for all projects in RoboHelp 7?

This is related to the posting - "RoboHelp 7 (with patch) IE6
does not display popup field definitions". Somewhere in our
environment the character set is getting changed to western
european (ISO) for the pages that do not load initially in IE6/XP
from the OAS even though the code generated by RoboHelp is utf-8.
The WebHelp generated in RoboHelp v5 has a characterset of
windows-1252. None of the pages with the character set of
windows-1252 have a problem loading (or changing the character
set). The problem may be on the OAS or the single signon
layer.

Firefox crashes whenever i want to install any addon or download any file. Some times i am receiving error while downloading any file like "could not be saved, because you cannot change the contents of that folder"

I am the user of latest firefox 3.6.6 browser. I am getting problems of frequent crashes whenever i tries to install any addon. The crashes also occures whenever i want to download any file.
I am also receiving errors while downloading any file like:
"C:\Users\****\AppData\Local\Temp\******.001.part could not be saved, because you cannot change the contents of that folder.
Change the folder properties and try again, or try saving in a different location. I already changed it many many times but still the same problem."
Adobe flash palyer is also giving problems of not responding. I am using updated version of it already. Java is also updated.
I already uninstalled firefox compeletly and re installed it many many times but still the same problem. I also scanned my computer with avira and malware bytes' Anti malware and got no dection. Please ractify this problem ASAP lest my profession will suffer.
== Crash ID(s) ==
b7f518f2-8d86-41ca-8bab-aee632100709; 1d790e10-d8eb-4904-98c9-94bc62100708; f042d319-b9f8-42ed-a8cb-57c7d2100708

Please help.
It is getting worse
Adobe flash player is crashing. I already uninstalled and re installed the latest ver. Also it is hanging randomly.
Please help.

My Imac is ejecting every disk inserted in it, I cannot access the disks, can any body help me troubleshoot the problem. I am using snow leopard.

My Imac is ejecting every disk inserted in it, I cannot access the disks, can any body help me troubleshoot the problem. I am using snow leopard.

Try resetting the SMC Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
and PRAM How to Reset NVRAM on your Mac - Apple Support
If those don't help you can try a cleaning disc or a quick shot of compressed air. Chances are that your drive has failed, join the club it's not all that uncommon. You can either have it replaced or purchase an inexpensive external drive. Don't buy the cute little Apple USB Superdrive, it won't work on macs with internal drives working or not.

Applications problem: "You cannot update this software since you have not owned the major version of this software."

Hi all,
RE: Applications problem: "You cannot update this software since you have not owned the major version of this software."
Until recently, I have not encountered this problem. And I am facing this problem for both my iPad and iPhone.
I only have 1 iTunes account and the most recent change was that I switched the location from Singapore to UK (I'm currently in the UK). I also updated my applications a couple of times before since the change in location, so I doubt it's due to the location change. I've tried signing out of the account in the iTunes accounts on the devices, then signing back in. I've also tried restarting the devices (and for the iPad, I even updated the iOS).
Any idea what else I can do to try to rectify this?
Thanks and regards,
Tammy

Hi there!
Thanks for replying!
1. Yup, my iOS is the latest (6.0.1), and I have 7 apps on my iPhone that apparently have updates. But it's been 6.0.1 for quite some time and I've also been able to update the apps till just this week.
2. I don't have a credit card associated with my account anymore. Ever since I changed the location, I removed the credit card details. But I didn't have problems with any of my apps (updating or downloading new ones) until this week. Also, all the apps I've downloaded since I came to the UK are free apps.
I still don't know what's wrong.

I have a US Mac living in the UK. I tried to download both the British and American version. Both state "You cannot use the application Firefox with this version of MAC OSX". Any suggestions how to proceed?

I have a US Mac living in the UK. I tried to download both the British and American version. Both state "You cannot use the application Firefox with this version of MAC OSX". Any suggestions how to proceed?

Firefox 4 requires at least OS X 10.5 and an Intel Mac. You can get the latest version of Firefox 3.6 which works on OS X 10.4 from http://www.mozilla.com/en-US/firefox/all-older.html

My Imac is ejecting every disk inserted in it, I cannot access the disks, can any body help me troubleshoot the problem.

My Imac is ejecting every disk inserted in it, I cannot access the disks, can any body help me troubleshoot the problem

The frist thing to try is a drive-n disk. They are cheap (US$5-15) and easy to use. Many unresponsive drives, even ones declared "dead" by an Apple tech, have returned to service after a cleaning.
Check with home entertainment specialty shops, electronic superstores and office supply outlets that sell computer accessories.

Approach to converting database character set from Western European to Unicode

Hi All,
EBS:12.2.4 upgraded
O/S: Red Hat Linux
I am looking for the below information. If anyone could help provide would be great!
INFORMATION NEEDED: Approach to converting database character set from Western European to Unicode for source systems with large data exceptions
DETAIL: We are looking to convert Oracle EBS database character set from Western European to Unicode to support Kanji characters. Our scan results show
both “lossy (110K approx.)” and “truncation (26K approx.)” exceptions in the database which needs to be fixed before the database is converted to Unicode.
Oracle Support has suggested to fix all open and closed transactions in the source Production instance using forms and scripts.
We’re looking for information/creative approaches who have performed similar exercises without having to manipulate data in the source instance.
Any help in this regard would be greatly appreciated!
Thanks for yourn time!
Regards,

There are two aspects here:
1. Why do you have such large number of lossy characters? Is this data coming from some very old eBS release, i.e. from before the times of the Java applet interface to Oracle Forms? Have you analyzed the nature of this lossy data?
2. There is no easy way around truncation issues as you cannot modify eBS metadata (make columns wider). You must shorten or remove the data manually through the documented eBS interfaces. eBS does not support direct manipulation of data in the database due to complex consistency rules enforced by the application itself (e.g. forms).
Thanks,
Sergiusz

How to change the character set?

Platform is win2000 and oracle 8.17. I need to write data in Bulragian. Automatic character converter in oracle didn't work! Database is created already!
Is there any function in pl/sql or Java that can convert character set in cl8mswin1251? When I read the data from database there are only ?????
Thank you in advance!

I'm not sure what you're asking here. "Will it be ok" for what?
Assuming
- you read the chapter I linked to,
- ran the character set scanner,
- the character set scanner indicated that all your existing data is properly encoded ISO 8859-1
- the character set scanner indicated that all the ISO 8859-1 data could be converted to Windows-1252
- all the national character set data was properly encoded in whatever national character set the database had
- you did the export properly
- you did the import properly
- your client NLS_LANG settings are all correct
then sure, everything should be OK.
If you skipped one of these steps, I would again strongly encourage you to read the chapter I linked to originally as well as the Metalink article others have pointed you to.
Justin

USING THE CHARACTER SET SCANNER

How can I find and download the Character Set Scanner utility mentioned in MetaLink document # 66320.1.
Thanks
Pratap

I would like to know if there exists a database character set
scanner for ORACLE816. If not, can I use the ORACLE817 scanner
to scan my ORACLE816 database?Check out the Globalization Support Home page
http://technet.oracle.com/tech/globalization/content.html and go
to the scanner download page for more info.
Is it important to use a scanner if I am converting my database
from, say, WE8ISO8859P1 character set to UTF8? Yes definitely. The scanner will identify
1. If you have any invalid WE8ISO8859P1 data in your database ,
these will be lost during the character set conversion process.
2. If there are any data cell expansions, so that column widths
can be expanded to cater for the new sizing.
3. Area of possible character set conversion and truncation of
data.
Can I assume that a database UTF8 will automatically store all
my original characters correctly?UTF8 can store all the characters from WE8ISO8859P1 ,and it can
be stored correctly if your NLS configuration is correct . The
key is your client NLS_LANG character set setting .
I have a client with NLS_LANG set to UFT8. When I exported my
database (in WE8ISO8859P1) from my client, the export was done
in the client's setting i.e. UTF8. Can I assume that the
conversion was done at the time of export itself?Yes, your assumption is correct.

GB won't open- This is what I get... Path does not exist: /Library/Audio/Apple Loops Index st: /Library/Audio/Apple Loops Index w/out this directory you cannot use the Loop Browser

Path does not exist: /Library/Audio/Apple Loops Index st: /Library/Audio/Apple Loops Index w/out this directory you cannot use the Loop Browser. Then I get this message...
Instrument Library Invalid
GarageBand Ecpects a valid instrument foledr in /Libraty/Application Support/GarageBand
Please choose a valid instrument Library folder or quit and re-install GB
Any solutions?

Is this a new installation of GarageBand or has it worked before on the same computer?
Or have you transferrred your GarageBand from a different computer?
The error message is saying, that your GarageBand installation is incomplete. There are essential foldrs missing in your system library.
Check, if indeed both folders are missing or if only the permissions are set incorrectly.
Your system library (the folder "System" directly on your system drive) should have the following folders inside the folder "Audio", and they need to be readable by the system and by administrators.
And in the folder /Library/Application Support there should be the Instrument Library.
If these folders do not exist (or no longer exist), restore them from your backup- If your GarageBand version is a new installation, the application may not hve been downloaded or installed completely, then reinstall GarageBand.
What is your GarageBAnd version, and how did you install it originally?
Regards
Léonie

After upgrading to Maverick, when I double click on the attchment I get this message "...could not be saved, because you cannot change the contents of that fold

After upgrading to Maverick, when I double click on the attachment I get this message "...could not be saved, because you cannot change the contents of that folder. Change the folder properties and try again, or try saving in a different location." It happens for all types of files.
Any suggestions as how to fix this?
I'm on a Mac OS X 10.9.3 with Thunderbird 24.5.0

Thunderbird > preferences (I think on a mac) and under attachments set the folder

When I download photos from a flash drive,everything is fine and they show in Events and Pictures, but when I click on the individual pic I get an error message saying that it cannot locate the JPG. Any thoughts?

When I download photos from a flash drive,everything is fine and they show in Events and Pictures, but when I click on the individual pic I get an error message saying that it cannot locate the JPG. Any thoughts?

It sounds like your iPhoto Advanced preferences are set to not copy photos during import, i.e. a Referenced library:
Check your Advanced preferences to see if that's the case. If it is the best solution would be to select the checkbox to copy the photos and reimport the photos from the flash drive. Then check the new import. It it was OK you can delete the previous event with the "missing" photos.
OT

When I try to print an jpeg or png from Photoshop all it does is convert the image to a PDF & plop it on my desktop- it won't print the image. Any suggestions as to how to fix this?

When I try to print an jpeg or png from Photoshop all it does is convert the image to a PDF & plop it on my desktop- it won't print the image. Any suggestions as to how to fix this?

Yes, the printer is on, it’s selected in Printer Set-Up & I’ve never had this problem before. It’s definitely a Photoshop issue as every other type of file prints fine. I’ve uninstalled Pshop & am now reinstalling. Hope that will do the trick.

Problem : "You cannot convert the character set"..Any suggestions?

Similar Messages

Maybe you are looking for