Problema con exportacion a adobe media encore

Hola amigos,
Tengo este pequeno problema cuando tengo ya finalizado mi trabajo en Premiere y quiero exportar por adobe media encore mi proyecto para poder quemarlo en un DVD por el adobe Encore, algunas veces exporta solo el audio lo cual esta mal y otras veces si exporta todo ok (video y audio) lo cual esta ok... alguien sabe porque es???
yo exporto en mpeg-dvd y lo hago en la mas alta calidad con VBR-2 (para que haga dos pases en el renderizado)
Esto del audio solo sucede cuando mando a exportar con esas caracteristicas pero el VBR-2 solo hace una pasada, porque hace eso?
Cuando hace las dos pasadas todo esta ok.
Porque puede suceder eso???

Hola! No se si llego muuy tarde, pero tal vez pueda ayudar a otros con el mismo problema.
Si queremos que el widget quede superpuesto a todos los elementos de la pagina damos clic en la flechita azul del widget y seleccionamos "superponer elementos" y si queremos lo contrario entonces lo des-seleccionamos.
Por otro lado si el que nos está dando problemas es footer (o pie de página) que aunque la página adapte adecuadamente su tamaño a las necesidades del widget él queda perdido en algún lugar del espacio donde no se supone que debe estar (superpuesto o por debajo) entonces vamos a "propiedades de la página" y en la pestaña maquetación des-seleccionamos la opción "pie de página adhesivo" de esta manera el pie de pagina se mantendrá constante con los cambios de largura de la página

Similar Messages

Problems to Export to Adobe Media Encoder!

Hi, I´ve a problem to export to Adobe Media Encoder!
When in Premiere Pro CS4, I click in Files - Export - Media.. it shows a display saying: "An Adobe Media Encoder update s available for this version of Premiere Pro.."
But I´ve updated Premiere Pro CS4 to 4.21 and Media Encoder to 420! Both are installed!
And the display message s showed yet! So I cant send the project into Media Encoder by click, just if i open Media Encoder..
How do I solve this?
Because before I´ve updated Premiere Pro CS4, I´didnt have this boring message..
Thanks for your help!
Gustavo

Gustavo,
Though you have updated, it appears that the updater still thinks that you have not.
The first thing that I would do is follow the suggestion in the message. An alternative would be to close PrPro, and open Bridge, then choose Help>Update from there. Not sure why updating from Bridge seems to do things better, but it does for many.
This should do one of two things: actually do the update (maybe it only was applied partially? and clear the updater notification. I have had similar with Acrobat Pro, where it took three attempts to get the update to both complete and then to clear the notification messages.
Now, when I go to update from Adobe, I first shut off my AV, pop-up blockers and spysweeper programs. I trust Adobe.com, so do not want anything getting in the way. One more thing to do, prior to updating is to make sure that you have the very latest Adobe Flash Player installed. More and more, Adobe's installers rely on Flash Player.
That is all that I can think of now, other than Good Luck!
Hunt

PRemiere Pro CS3 Freezes when I choose Adobe Media Encore

Hi,
For the first time, When I choose File - Export - Adobe Media Encoder the application freezes and nothing happens. Bt hitting the ESC key "wakes" it back up again.
The Sequence is only 12 minutes long, but this has never happened before.
Exporting to any other option seems to work.
any ideas?
cheers

Pressing the ESC key is the clue here. It sounds like the AME window is opening but is not visible. Use the ALT+TAB key combination to cycle through your open windows and see if it brings AME to the front. If you have more than one monitor then try disabling all but one for testing purposes.
Cheers
Eddie
Forum FAQ
Premiere Pro Wiki
- Over 250 frequently answered questions
- Over 100 free tutorials
- Maintained by editors like
you

CS4 Adobe Media Encore crashes when exporting HD footage

Hey guys,
Here's my PC's specs:
Windows Vista Home Premium
Service Pack 1
Processor: AMD Phenom 9550 Quad-Core Processor 2.20GHz
Memory (Ram): 4.00GB
System Type: 32-bit operating system
I've got adobe premiere pro CS4 and everything has been going well when working on Mini DV imported footage - exporting AVI's etc, it's all good. But now I've started shooting on a Sony EX3 so I've been importing that footage as MP4s. While not amazing, the editing has been going well, it just goes horribly wrong when I try to export any footage.
For example, I've got a 3 minute video which I've tried to export as an mp4, AVI, mov or H.264 - Adobe Encore will open up quickly enough and then I'll press "Start" and nothing will happen, it will sit and eventually crash.
Any thoughts or suggestions?
Thanks.

Read Harm on drive setup http://forums.adobe.com/thread/662972?tstart=0
What brand/model graphics card (ATI, nVidia, etc) and driver version
Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used... see Question 1

[OT] Problema con exportacion desde Illustrator CS2 a versiones anteriores.

Hola,
Me han solicitado en la empresa que va a imprimir el trabajo
que les pase el
archivo en illustrator 9 o 10.
No consigo averiguar como hacerlo desde CS2, ni en exportar
ni guardar como.
He buscado por internet pero no consigo nada, en freehand
estaba bastante
claro este tema, como es posible que este tan rebuscado esto.
O soy muy
torpe...
Un saludo y muchas gracias.
¡ Feliz Navidad !

Hazlo como illustrator 88
"tomaii" <[email protected]> escribió en el
mensaje
news:em0mi8$42n$[email protected]..
> Hola,
>
> Me han solicitado en la empresa que va a imprimir el
trabajo que les pase
> el archivo en illustrator 9 o 10.
>
> No consigo averiguar como hacerlo desde CS2, ni en
exportar ni guardar
> como.
>
> He buscado por internet pero no consigo nada, en
freehand estaba bastante
> claro este tema, como es posible que este tan rebuscado
esto. O soy muy
> torpe...
>
> Un saludo y muchas gracias.
>
> ¡ Feliz Navidad !
>
>
>

How to open Adobe Media Encoder CS5 in Windows

Please excuse my ignorance but how do you open Adobe Media Encoder? I've searched everywhere and cannot find a solution. In Adobe help,it says it's in the start menu under all programs but all I have been able to find is a folder with a bunch of dll files. If I try to export a clip from Premiere Pro, It doesn't open, no error message or anything, simply nothing happens. I found an update but that still didn't do anything, still no luck in finding it. Thanks in advance for any feedback.

On my computer folder structure is...
Program Files... Adobe... Adobe Media Encoder CS5
Includes (along with a lot of dll files)
Adobe Media Encorer.exe dated 8/6/2010 size 1,848 kb

Adobe Media Encoder CC Crashing on Startup (W8)

Can somebody help with this issue as it's causing me a heap of problems. On startup, adobe media encoder crashes, it has been working fine for me for the past few weeks. I've updated all software via the creative cloud but I still get the issue.
If this is not a known fault, what should be the next step for diagnosis?
Thanks in advance.

Please try holding Shift key while launching AME. This resets the AME preferences.
If this doesn't solve the crash, directly delete the preferences folder <OS drive>:\\Users\<user name>\AppData\Roaming\Adobe\Adobe Media Encoder. Delete a folder "7.0".
If none of above helps, please delete the media cache at <OS drive>:\\Users\<user name>\AppData\Roaming\Adobe.
Delete "Media Cache" and "Media Cache Files".

Adobe Media Encoder CS5 - 5.0.1 update

When I try to update AME CS5 using Adobe Updater, I get this error message:
The following updates were unable to install. If you wish to install these updates, please fix the problems below and retry:
Adobe Media Encoder CS5 5.0.1
Adobe Media Encoder CS5 has been moved or deleted improperly. Please launch or reinstall the application to update the location and try again. To remove the product from the system, please uninstall product using the aliases under "/Applications/Utilities/Adobe Installers"
A few problems with this - there isn’t an AME uninstaller alias. Also there isn't an installer on the retail DVD, so I wouldn't be able to reinstall anyway. This is further complicated by the fact that the 5.0.1 update is not available online for download. Maybe I'm missing something here, and this is just a stupid mistake on my part.
I have launched and used AME as well as checking that it is installed correctly (correct location) in my current configuration – still no luck with the auto update.
Is there a way to tell Adobe (or Adobe Updater) the location of AME, so this install will complete successfully?
Has anybody else seen this issue?
Has anybody else resolved this issue?
Any help is appreciated -
Jeremiah
System Config:
MacBook Pro 5,1 (15-in, late 2008)
OS 10.6.4
2.53 GHz Core 2 Duo
4GB 1067 MHz DDR3 RAM
NVIDIA GeForce 9600M GT 512 MB (and GeForce 9400M 256 MB)
Adobe CS5 Master Collection (all current release except AME)
AME 5.0.0.402 (64bit)

I did install the Adobe Support Advisor before posting. ASA was a little quirky on the Mac as well, but I finally got it to work; however, it reported no issues. Thanks for the suggestion though.
What I ended up doing was moving the AME directory to the root level on the system - and then back to it's original location in the Applications folder (same location it has been in). This must have updated something on the OS side because once I ran the updater again - all updates installed successfully.
I'm not sure how the issue came about, but it appears that the OS or Adobe had some incorrect information in a config or installer log file somewhere and by moving the folder out and then back it was resolved/updated.
thanks -
j

Help me! Adobe Media Encoder: configuration error

Hello! I have a problem when initializing the Adobe Media Encoder, whenever I try to start it, I get the following error message:
                                                                                                                    Configuration Error
                                              Please uninstall and reinstall the product again.
                                              If the problem still occurs, contact Technical Support Adobe and mention the error code that appears at the bottom of the screen.
                                              Error: 16
                                              http://www.adobe.com/br/support
* already uninstalled and reinstalled several times product and the problem continues! *
Processor: Intel Pentium dual core 2.7Ghz
RAM: 3Gb DDR2 667Mhz
Video Card: Asus 210 Silent 1Gb GDDR3 64Bits
Motheboard: Asus P5KPL-AM SE
OS: Windows 8

Which version of Media Encoder are you using?
Please try clearing the app preferences as described below. This may help in some cases.
If this is CC or CC 2014 version, launch the app while holding a shift key.
If this is CS6 or older, launch the app while holding Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac OS)

Adobe Media Encoder CS5 5.0.1 Update is not applicable

while running the update manager, i got the message:
the following updates were unable to install. If you wish to install this updates, please fix the problems below and retry:
Adobe Media Encoder CS5 5.0.1
Update is not applicable
anybody else received this?
Any idea what or how to fix?
tnx

I am also having the same issue.
Everytime this update is coming and im unable to update it...

How to enable Adobe Media Encoder in Nvidia Contol Panel

Hi everyone,
I am having a serious issue.
Adobe Media Encoder is showing enabled gpu acceleration (Cuda). However,
Project: small test file. 35 seconds in length.
Composition: After Effects with Camera Rig, expressions = 4
Lights = 2 . "Camera Rig " 3D text.
Length 35 seconds
Dell Precision M6800 Workstations X 2
System Build: Windows 7 pro , OS SSD, 32gb Ram.
Graphics Card: Nvidia Quadro K4100M .
As the project is imported to Adobe Media Encoder
Set to 1080p h.264.
Ame indicates for a 35 second file will take 25 hours to render. !
Also and a big one is AME is running the system CPU at 100 %.
Lastly the Nvidia Quadro is set and enabled for running on Open CL.
Somehow Adobe Media Encoder is not running or being pushed by the graphics card.
Any help would be appreciated. I have been in touch with Adobe support and they are checking into this as well as Nvidia level 2 support.
Thank-you very much for any input on this.
Things are pretty much at a stand still until a resolve is found
Best regards,
Bob.

On my computer folder structure is...
Program Files... Adobe... Adobe Media Encoder CS5
Includes (along with a lot of dll files)
Adobe Media Encorer.exe dated 8/6/2010 size 1,848 kb

Is there some way one can change the port used by Adobe Media Player?

After I installed Adobe Media Player I am unable to access my IIS web site. Is there a way to hook-up Adobe Media Player to another port? I guess the problem started after installing Adobe Media Player.
http://hodentek.blogspot.com/2009/04/adobe-media-player-and-iis-part-2.html
http://hodentek.blogspot.com/2009/04/adobe-media-player-internet-information.html

Because I've my original response I've been getting email updates about this topic and decided to install Adobe Media Player and test myself.
On my main system (Windows XP SP3) IIS is not blocked when installing and running Adobe Media Player. I suspect your problem may be related to something else entirely. (Flash Media Server or frankly any other httpd could cause the issue you're experiencing). (I can watch videos with the player and concurrently debug websites using http://localhost, http://localdomain:80 as well as http://localhost:80
I'd try to pin down exactly when the problem started happening and see what was installed. It's also worth noting that there are a lot of malware programs that monitor / intercept and direct traffic on port 80, this can cause all sorts of havoc on XP with IIS.
If you happen to find that it is indeed Flash Media Server, their forums are here: http://forums.adobe.com/community/flash/flash_media_server
Just my 2 cents

Adobe Media Server DVR only 5 second recording

I have a strange problem. I have an application built in Flash Builder.
When I record to Flash Media Server I don't have any issues, it'll do DVR for as long as I want. But when I record to Adobe Media Server, the recording is only 5 seconds long.
ns = new NetStream(nc);
ns.client = new Object();
userUID = UIDUtil.createUID();
ns.attachAudio (mic);
ns.attachCamera (camera);
ns.publish( "demo" + userUID, "record" );
Later I can play the recording, timestamp says that it's a 5 second archive, but it'll really keep playing the recorded video.
Same code, just different server.
Has anyone had this problem when migrating to Adobe Media Server from Flash Media Server? Using Amazon.

I'm having this issue as well. Did you ever find a solution to it?

Adobe Media Encoder CS4 problem

I having a ***** at Adobe
I do have a lienced copoy CS4 Design Premium. I down loaded premier pro CS4 to demo it about 8 months ago and had not used it up to about 1 weeks ago. All that time Adobe Media Encoder CS4 did not work. I came back to the problem last week when I wanted to convert a video to a FLV file, did not work, I went through uninstalling and reinstalling Design Premium: reloaded parts of the the suite still did not work: went to the forums and tried every which way to get resolution nothing worked. This morning I opened up Premier and it world not open without serial key I was only a week into the 30 trial period. So I uninstalled premier. Reloaded the Media Encoder and guess what it worked. I am know looking at buying another product. Another thing while using the trial version I could not demo encore CS4.
****** off
PS I have now uploaded the FLV to my website. I never had any problem with AME CS4 until I loaded Premier CS4
Ian Cleland

These directions are specifically for windows 7 x64
It may be hidden since it's a system folder. You can get to it one of two ways.
Either: Hit start button + r to get run, then insert (C:\Users\Administrator\AppData\Roaming\Adobe\Adobe Media Encoder\4.0\) without the () and press enter. *This is assuming that your username is Administrator. If the folder exists it will take you there, even if it is hidden.
Other way: hit start button on keyboard and type in "folder options". Press enter when it shows up in the start menu search. Click on the View tab then select "Show hidden files, folders, or drives" and uncheck "Hide protected operating system files". This should enable you to see both the AppData and Roaming folder. You may want to undo these selections otherwise you'll see files you usually don't want to see. (thumbnail caches...)
If neither of these methods work, let me know which folders you see in this directory "C:\Users", Administrator may not the account you're currently running on.

Problemas con adobe premiere pro cs4

Hola amigos: Instale el programa de prueba adobe premiere pro cs4 y he querido usarlo pero le doy al icono de Pr y me sale en la pantalla la ventana morada que indica la iniciaciòn del adobe premiere pro pero despues de 5 minutos aparece ota ventana en la pantalla de mi pc que dice lo siguiente: PREMIERE PRO DEBUG EVENT Premiere Pro has encountered an error. [..\.. \Src\ImporterProcessClient. Cpp-127] Continued le doy al comando Continuid y no sale nada y desaparece la ventada de inicio de adobe premire, no he podido usarlo. De igual forma cuando inicio el adobe media encoder, aparece una ventana que dice: Adobe Media Encoder. Exe - No se puede encontrar el componente Error al iniciar la aplicacion porque no se encontrò processcooditanionclient. Dll. La reinstalacion de la aplicacion puede solucionar el problema. Aceptar. Ahora bien antes de instalar el adobe premiere de prueba ya yo tenia instalado after effects cs4 de prueba y el adobe media encoder funsionaba muy bien... Realmente no se que ha pasado quisiera su asistentencia para que me ayuden al respecto ya he desinstalado en instaldo ambos programas tanto adobe premiere com adobe after effects en 2 oportunidades y solo el after effect funsiona pero el premiere y el encoder no.... Tambien lo incicie como administrador y nada sigue igual... Gracias por la ayuda que me puedan prestar al respecto

Nsasy,
Al igual que en el foro de Premiere en inglés, deberías facilitar detalles como:
Version de sistema operativo.
Algun detalle de hardware como tarjeta grafica, memoria, etc. o confirmar que has comprobado que todo tu hardware es compatible con la aplicación
Parece ser que a veces los programas antivirus dificultan o impiden instalaciones, prueba a deasactivarlos mientras instalas el programa.

Problema con exportacion a adobe media encore

Similar Messages

Maybe you are looking for