Problems about create guest vm using office template in vm manager 3

in vm manager 2.2, we may pass "ip address, os root's password, vnc console password"\
But we can't pass them in vm manager 3.0.
after creating guest vm ,how login to guest os via console or vncviewer without password?

liyongz wrote:
But we can't pass them in vm manager 3.0.This is coming in a future version when we release the updated template configuration engine.
after creating guest vm ,how login to guest os via console or vncviewer without password?So is this.

Similar Messages

Problems about creating an application client using Netbeans 5.0

Dear all,
I have created an "enterprise application" project in Netbeans 5.0 and I want to create an AppClient to access the EJBs in the project. Since Netbeans 5.0 did not contain automatic support for AppClients. I need to do some configurations to make it act like an AppClient. (I am forced to use version 5.0 but not 5.5)
After searching in google, I found the following article about creating an AppClient in Netbeans:
http://www.netbeans.org/kb/41/app-clients.html
I read through the steps in this web page and carefully apply it to my own enterprise application. Everything was fine but when I cleaned and built it, Netbeans told me there's something wrong in the build.xml of my AppClient project:
init:
deps-jar:
init:
deps-jar:
compile:
library-inclusion-in-archive:
dist:
compile:
C:\MyAppClient\build.xml:108: C:\MyAppClient\${file.reference.build-jar} not found.
BUILD FAILED (total time: 1 second)
This is the build.xml file of MyAppClient project:
<?xml version="1.0" encoding="UTF-8"?>
<project name="MyAppClient" default="default" basedir=".">
    <description>Builds, tests, and runs the project MyAppClient.</description>
    <import file="nbproject/build-impl.xml"/>
   
    <target name="-pre-init">
      <fail unless="com.sun.aas.installRoot">
        J2EE home property - neither j2ee.home nor com.sun.aas.installRoot(NetBeans) is set.
      </fail>
      <property name="j2ee.home" value="${com.sun.aas.installRoot}" />
      <condition property="appclient.name" value="appclient">
        <and>
          <os family="unix"/>
          <os family="Linux"/>
        </and>
      </condition>
      <condition property="appclient.name" value="appclient.bat">
         <and>
           <os family="Windows"/>
         </and>
      </condition>
      <condition property="package-appclient.name" value="package-appclient">
        <and>
          <os family="unix"/>
          <os family="Linux"/>
        </and>
      </condition>
      <condition property="package-appclient.name" value="package-appclient.bat">
        <and>
          <os family="Windows"/>
        </and>
      </condition>
    </target>
    
    <target name="-pre-jar">
      
       <copy todir="${build.classes.dir}">
         <fileset dir="${file.reference.build-jar}">
           <include name="**/*.class"/>
         </fileset>
       </copy>
       
       <mkdir dir="${build.classes.dir}/META-INF" />
       <copy todir="${build.classes.dir}/META-INF">
         <fileset dir="${src.dir}/conf">
           <include name="*.xml"/>
         </fileset>
       </copy>
    </target>
    <target name="run" depends="init,compile">
       <exec executable="${j2ee.home}/bin/${appclient.name}">
         <arg line="-client ${dist.jar}"/>
       </exec>
    </target>
    <target name="package-appclient" depends="init">
        <exec executable="${j2ee.home}/bin/${package-appclient.name}" dir="${dist.dir}"/>
    </target>
    </project>It seems like the $file.reference.build-jar couldn't be resolved to a correct path portion string. After referring back to the web page, I still could not understand what is causing this error.
So I started googling again using the keyword: file.reference.build-jar. I still could not come up with any relevant results.
Could somebody tell me how this error can be fixed or at least give me some clues what is the possible cause of this error?
Thanks in advance.

I have forwarded this to another team member. Stay tuned for the response.

Problem to create animated gif using transparent frames

Hi, everyone:
My name is Edison, I am playing with Gif89Encoder utility classes to make an animated gif which is a requirement for my course work.
I got some problem about the transparent frames. I used the png image as the frame to create the animated gif,
those pngs have transparent colors and the background is totally transparent, when i create the animated the gif with those
frames, the animated gif display the colors but without transparency for those colors, but the background is transparent as expected.
I am not sure if I should IndexGif89Frame or DirectGif89Frame for the colors from the Gif89encoder package.
Is there anyone got the same problem and knows how to fix it?
The following is how i setup the colors in my png file, the alpha channel is 80.
Color[] colours = new Color[7];
          colours[0] = new Color(255, 255, 255, 0);
          colours[1] = new Color(128, 128, 255, 80);
          colours[2] = new Color(128, 0, 128, 80);
          colours[3] = new Color(0, 128, 128, 80);
          colours[4] = new Color(128, 128, 0, 80);
          colours[5] = new Color(204,102,255,80);
          colours[6] = new Color(255, 0, 0, 80);The code i did to generate gif:
public void run89Gif()
        Image[] images = new Image[4];
        try{
            images[0] = ImageIO.read(new File("D:/temp/0.png"));
            images[1] = ImageIO.read(new File("D:/temp/1.png"));
            images[2] = ImageIO.read(new File("D:/temp/2.png"));
            images[3] = ImageIO.read(new File("D:/temp/3.png"));
            OutputStream out = new FileOutputStream("D:/temp/output.gif");
            writeAnimatedGIF(images,"Empty annotation", true, 1, out);
            images = null;
        }catch(IOException er){ }
static void writeAnimatedGIF(
        Image[] still_images,
            String annotation,
            boolean looped,
            double frames_per_second,
            OutputStream out) throws IOException
        Gif89Encoder gifenc = new Gif89Encoder();
        for (int i = 0; i < still_images.length; ++i){
           gifenc.addFrame(still_images);
gifenc.setComments(annotation);
gifenc.setLoopCount(looped ? 0 : 1);
gifenc.setUniformDelay((int) Math.round(100 / frames_per_second));
gifenc.encode(out);
Thanks in advance.

Hi, everyone:
My name is Edison, I am playing with Gif89Encoder utility classes to make an animated gif which is a requirement for my course work.
I got some problem about the transparent frames. I used the png image as the frame to create the animated gif,
those pngs have transparent colors and the background is totally transparent, when i create the animated the gif with those
frames, the animated gif display the colors but without transparency for those colors, but the background is transparent as expected.
I am not sure if I should IndexGif89Frame or DirectGif89Frame for the colors from the Gif89encoder package.
Is there anyone got the same problem and knows how to fix it?
The following is how i setup the colors in my png file, the alpha channel is 80.
Color[] colours = new Color[7];
          colours[0] = new Color(255, 255, 255, 0);
          colours[1] = new Color(128, 128, 255, 80);
          colours[2] = new Color(128, 0, 128, 80);
          colours[3] = new Color(0, 128, 128, 80);
          colours[4] = new Color(128, 128, 0, 80);
          colours[5] = new Color(204,102,255,80);
          colours[6] = new Color(255, 0, 0, 80);The code i did to generate gif:
public void run89Gif()
        Image[] images = new Image[4];
        try{
            images[0] = ImageIO.read(new File("D:/temp/0.png"));
            images[1] = ImageIO.read(new File("D:/temp/1.png"));
            images[2] = ImageIO.read(new File("D:/temp/2.png"));
            images[3] = ImageIO.read(new File("D:/temp/3.png"));
            OutputStream out = new FileOutputStream("D:/temp/output.gif");
            writeAnimatedGIF(images,"Empty annotation", true, 1, out);
            images = null;
        }catch(IOException er){ }
static void writeAnimatedGIF(
        Image[] still_images,
            String annotation,
            boolean looped,
            double frames_per_second,
            OutputStream out) throws IOException
        Gif89Encoder gifenc = new Gif89Encoder();
        for (int i = 0; i < still_images.length; ++i){
           gifenc.addFrame(still_images);
gifenc.setComments(annotation);
gifenc.setLoopCount(looped ? 0 : 1);
gifenc.setUniformDelay((int) Math.round(100 / frames_per_second));
gifenc.encode(out);
Thanks in advance.

A problem about create sales order with reference to contract.

Hello,everyone,
when I create sales order va01,there is user exit in MV45AFZB to check the vbkd-bstkd,unique and fixed length.
but there is no such in contract creation va41.
when I create a contract and copy the data to sales order ,the check code is prevent me from copying
message error:the vbkd-bstkd check is wrong.
how to solve the problem, if I have to use the check in sales order.

The Simple thing may be put a check at contract stage it self, then whatever data is in contract will copy in sales order. So you wont face this problem.
Thanks,
Raja

Problem in Creating the Product Using COM_PRODUCT_MAINTAIN_MULT_API

Dear CRMExperts,
I am working in SAP CRM 5.0 version.I want to create the Product Using the Function Module "COM_PRODUCT_MAINTAIN_MULT_API".For this i have gone through the SAP Note 810153.I copied the Report Program from that note and i developed the Report Program.but i am facing some problem.
The structures zinstall_info2_maint_t and zinstall_info2_maintain does not exist in SAP CRM 5.0 Version.So i am getting Short Dump.
If anyone come across the same problem.Please help me to solve this issue.Please help me it is very Urgent.
Thanks & Regards,
Ashok.

Hi,
Note 1074357 - Implementing rollback in FM COM_PROD_MATERIAL_MAINTAIN_API
Does this help you?
regards,
Murali

Problem in creating new field using AET

Hi ,
We are facing a problem while creating a new field using AET.
[http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414900)ID0190611650DB01471683520393954021End?blog=/pub/wlg/12716]
Im following this blog while creating the new field using AET.
After filling all the field details and trying to create a Transport request its going for a runtime error.
The error is happening in class CL_CRM_GENIL_AXT_API
method get_editable_properties.
data lr_field_ext type ref to cl_genil_field_extension.
field-symbols <axt_field_extension> type gtype_field_extension.
data lr_fieldext_ref type ref to if_axt_field_ext_access.
read table axt_field_extension_tab assigning <axt_field_extension> with key ext_bo       = is_key-ext_bo
                                                                          ext_bo_part = is_key-ext_bo_part
                                                                          extension_id = is_key-extension_id.
lr_field_ext = <axt_field_extension>-axt_extension.
if sy-subrc = 0.
While Debugging we can see that the table axt_field_extension_tab is having zero values during the last execution.
But the Zfield is getting generated and the status is in green.
Any suggestions will be highly appreciated.
Regards,
Sijo.
Edited by: sijokjohn85 on Sep 9, 2009 1:00 PM
Edited by: sijokjohn85 on Sep 10, 2009 12:49 PM

Hi,
you posted the same question again in a later post.
Here is my answer:
Hi,
the reason that AET does not work is because there is/are missing entries in one of DB table.
Namely the enhance BO assignment to the UI Object Type.
Could you please tell me, what is the UI Object Type in you current IC application.
In order to figure this out, you can put mouse cursor in one of the field in the UI and then press F2.
Then you can go to SM30 in SAP GUI open the View BSPDLCV_OBJ_TYPE and search for the UI object type.
Select the UI object type and see whether any enhanced BO is defined.
In your case it should be empty, otherwise you can use AET in IC.
And if it is empty we need to figure out which enhanced BO is relevant for the given UI Object Type.
Regards,
Steve
P.S. But still you can raise a CSN message.
The "Create New Field" should be in active mode.

Problem while creating service PO using bapi_po_create1

hi all,
i am getting error :
In case of account assignment, please enter acc. assignment data for item
what does this mean?
please help,,
thanks,
Siddhartha Prakash

Hi Sid.
I'm having this same problems on creating PO Service. Did you solve it? How did you do that?
I'm using a PR and the Category is 'Y', and I cant find where is the problem.
The tables that I'm passing to the BAPI_PO_CREATE1 are:
POITEM/ POITEMX
POACCOUNT/ POACCOUNTX
POSERVICES
POSRVACCESSVALUES
Please, if you have any idea, let me know!
Tks a lot!
Renata

Problem in Creating the Transport using Export option on Portal

Hi All,
We have problem in creating the Transport Packaage using the Portal EXPORT option. Here are the details:
When I tried to create a New Transport package on the Portal, It opens first page asking for the Package name, ID and suffix. After completing the form, when NEXT or Finish button is clicked, the system goes on forever and does not show the next page at all.
This is kind of Urgent as we were not able to transport the objects to QA system
Your help in this reagrd will be well appriciated.
Thanks and regards,
Babu

Hi All,
We have problem in creating the Transport Packaage using the Portal EXPORT option. Here are the details:
When I tried to create a New Transport package on the Portal, It opens first page asking for the Package name, ID and suffix. After completing the form, when NEXT or Finish button is clicked, the system goes on forever and does not show the next page at all.
This is kind of Urgent as we were not able to transport the objects to QA system
Your help in this reagrd will be well appriciated.
Thanks and regards,
Babu

Problem while creating WBS elements using LSMW

Hello experts,
I am able to create Project Definitions using LSMW. (using recording)
But there is a problem while creating WBS elements.
Tcode CJ20 has table control and that will become problem for multiple rows (levels).
Can anyone suggest a solution to mass upload WBS elements?
Thanks for your valuable advice.

Hi,
Instead of using "BAPI_PROJECT_MAINTAIN", use following solution. We are using this solution and it is working pretty good.
If the WBS element is already created and you want to create one more with same data, first get the WBS related information using BAPI_PROJECT_GETINFO as you are doing currently.
I am using different sets of BAPIs to create project, create / change WBS element.
I use function module from Function group CJ2001 ( Project related BAPIs ), CJ2054 ( WBS related BAPIs ) and PS_BAPI ( pre/post processing BAPIs ). There are specific order in which you need to execute these BAPIs.
For example if you want to create / change the WBS element, the BAPIs sequence is:
<b>1. BAPI_PS_INITIALIZATION
2. BAPI_BUS2054_CREATE_MULTI ( to create WBS )
or
2. BAPI_BUS2054_CHANGE_MULTI ( to change WBS )
3. BAPI_PS_PRECOMMIT
4. BAPI_TRANSACTION_COMMIT</b>
Check the documentation of BAPI "BAPI_BUS2054_CREATE_MULTI " to see how these function modules work.
Let me know if you need further information.
Regards,
RS

Problem in Creating a view using infotypes PA0001,PA0002,...

Hi,
Can anybody please help me how to create a Maintainence view using PA0001,PA0002,PA0003,PA0006,PA0032.
I tried to create it using se54.
when i use PA0003 as check table, i am not able to create relations with PA0001,PA0002,PA0032,PA0006.
Thanks in Advance.
Vinay.BR

You can create a view using SE11 as mentioned in the previous answer. Once you created, you can use SE16 to display the content of the view table. However, this does not serve much because you can also see the original table using SE16. Unless you want to generate screen dialog so that the view table can be used in SM30. This method can be done while editing the table in SE11. Click on Utilities->Table maintenance generator. However, this will be considered as a repair (modification to SAP standard) and you need repair key.

Problem in creating program dynamically using FM 'rss_template_instantiate'

hi everyone,
i need to create the program dynamically using FM 'RSS_TEMPLATE_INSTANTIATE'.
if we create the program using this function module can we see the generated code.
very urgent!!!!!
thanks in advance.
regards,
bharat.

hi everyone,
i need to create the program dynamically using FM 'RSS_TEMPLATE_INSTANTIATE'.
if we create the program using this function module can we see the generated code.
very urgent!!!!!
thanks in advance.
regards,
bharat.

Problem while creating partner link using https URL

Hi,
To create the partnerlink using https URL, I had done the following:
-Imported the self signed certificate into the OraBPELPM_\jdk\jre\lib\security\cacert
-Added following entries in OraBPELPM_1\integration\jdev\jdev\bin\jdev.conf
AddVMOption -Djavax.net.ssl.keyStore=E:\OraBPELPM_1\jdk\jre\lib\security\cacert
AddVMOption -Djavax.net.ssl.keyStorePassword=esbtest123
I am not able to create partner link using URL https://localhost/orabpel/default/ErrorHandlerBPEL/1.0/ErrorHandlerBPEL?wsdl .
Able to create partnerlink using same URL if I replace https with http.
Did I miss any other configuration that needs to done to create partnerlink using https in JDeveloper BPEL Designer.
Thanks,
-Vidya

Hi,
I too have the same issue. Appriciate if you share some knowledge on this issue.
Thanks
Aravinda

Problem with creating customer account using TCA Java API

Hi,
I am trying to create customer account using TCA java API. i am getting exception saying PL/SQL numeric error: character to number conversion. but this error raises when calling API method
HzCustAccountV2Pub.createCustAccount.
can any body help me in solving this issue, any clue why this exception raises. i have tested even the code given in TCA API user guide. that code also gets same error.

package client;
import java.math.BigDecimal;
import java.sql.Timestamp;
import java.sql.DriverManager;
import java.sql.SQLException;
import oracle.jdbc.driver.OracleConnection;
import oracle.jdbc.driver.OracleCallableStatement;
import oracle.jdbc.driver.OracleTypes;
import oracle.apps.ar.hz.v2api.HzCustAccountV2Pub;
import oracle.apps.ar.hz.v2api.HzPartyV2Pub;
import oracle.apps.ar.hz.v2api.HzCustomerProfileV2Pub;
class CreateCustAccount {
     public static void main(String[] args) throws Exception {
     HzCustAccountV2Pub.CustAccountRec p_cust_account_rec = new HzCustAccountV2Pub.CustAccountRec();
     HzPartyV2Pub.PersonRec p_person_rec = new HzPartyV2Pub.PersonRec();
     HzCustomerProfileV2Pub.CustomerProfileRec p_customer_profile_rec = new      HzCustomerProfileV2Pub.CustomerProfileRec();
     BigDecimal[] x_cust_account_id = new BigDecimal[1];
     String[] x_account_number = new String[1];
     BigDecimal[] x_party_id = new BigDecimal[1];
     String[] x_party_number = new String[1];
     BigDecimal[] x_profile_id = new BigDecimal[1];
     String[] x_return_status = new String[1];
     BigDecimal[] x_msg_count = new BigDecimal[1];
     String[] x_msg_data = new String[1];
     try
     Class.forName ("oracle.jdbc.driver.OracleDriver");
     OracleConnection conn = (OracleConnection) DriverManager.getConnection ("jdbc:oracle:thin:@ebiztst.trianz.int:1526:PATCH","apps","apps");
     HzCustAccountV2Pub custaccountV2Pub = new HzCustAccountV2Pub();
     p_cust_account_rec.account_name = "John Ac";
     p_person_rec.person_first_name = "John";
     p_person_rec.person_last_name = "Smith";
     p_cust_account_rec.created_by_module = "TCA_EXAMPLE";
     HzCustAccountV2Pub.createCustAccount(
     conn
     , "T"
     , p_cust_account_rec
     , p_person_rec
     , p_customer_profile_rec
     , "F"
     , x_cust_account_id
     , x_account_number
     , x_party_id
     , x_party_number
     , x_profile_id
     , x_return_status
     , x_msg_count
     , x_msg_data
     System.out.println( "x_return_status = " + x_return_status[0] );
     System.out.println( "x_msg_count = " + x_msg_count[0] );
     System.out.println( "x_msg_data = " + x_msg_data[0]);
     if (x_msg_count[0].intValue() > 1) {
          OracleCallableStatement ocs = null;
          for (int i=0; i<x_msg_count[0].intValue(); i++) {
          ocs = (OracleCallableStatement)conn.prepareCall(
          "begin ? := fnd_msg_pub.get( p_encoded => ’F’ ); end;");
          ocs.registerOutParameter(1, OracleTypes.VARCHAR);
          ocs.execute();
          System.out.println((i + 1) + ". " + ocs.getString(1));
          conn.close();
          } catch (ClassNotFoundException e) {
          System.out.println("Driver Not Found: " + e);
          } catch (SQLException e) {
          System.out.println("SQL Error." + e);
}

Problem in creating work center using bapi

hai all,
i am creating work center using " CRAP_WORKCENTER_CREATE ", it is also getting created successfully when I try to check CAPACITY for capacities and scheduling it is giving a error called.
" in table T006 entry is missing " . why it is comming like that.

Hi Goutam/Ram,
    I am trying to create capicity . I am useing CRAP_CAPACITY_CREATE .
   But I am getting so many errors. Is it the right Bapi or do know any other BAPI.
   We are trying to copy Capacities and work center from one plant to other.
Plz send if you any documentation or code. Also send work order creating code.
Thanks in Advance.

An annoying problem about creating an Apple ID !!!

Hi, i want to create an Apple ID for the US iTunes for my cousin who lives in Macedonia (i'm currently there and typing this from Macedonia). The account i want to create is an account with no credit card on file (i just click to dl a free app and then make apple id, i know because i have the same type of account myself), and i enter everything and blabla, but when i click the ,,Create Apple ID '' button, it says ,,Please contact iTunes support to complete the transaction''. Can i know the root of this problem and can something be done about it ?

You can't use an iTunes store from outside of its country. To be able to create a US based iTunes account you need a valid billing address in the US and be in the US - if you are in Macedonia then you can only create a Macedonian account and you will only be able to buy and download content from the Macedonian store.

Problems about create guest vm using office template in vm manager 3

Similar Messages

Maybe you are looking for