Problems Creating a CSV from command line
I have tried to create a csv file from the command line and get some unwanted lines of data in the output. Does anyone know how to create a csv without the extra lines from the command line.
I am using the following sequence of commands.
set wrap off
set termout off
set verify off
set heading off
set feedback off
set lines 900
set pages 9999
set newpage none
set embedded on
set colsep ','
set trimspool on
spool test6.lst
select * from rft;
spool off
When I run this from a script, I get exactly the data, which is what I want.
When I run this from the command prompt, I get an extra line at the start and one at the end of the csv file.
The data at the start is like this:
WMSP:wmsp:SQL*Plus> select * from rft;
The data at the end is like this:
WMSP:wmsp:SQL*Plus> spool off
Does anyone know how to keep these lines out of the data?
Thank you.
>
The data at the start is like this:
WMSP:wmsp:SQL*Plus> select * from rft;
The data at the end is like this:
WMSP:wmsp:SQL*Plus> spool off
Does anyone know how to keep these lines out of the
data?
Well, a workaround could be to use one of the gazillions of utilities in Unix/Linux to remove all lines having the sql prompt (SQL>), right after your "test6.lst" file has been created.
I am using the "perl pie" for the same in the code snippet that follows:
$
$ cat create_csv.sh
#!/bin/bash
sqlplus -s test/test << EOF
set wrap off
set termout off
set verify off
set heading off
set feedback off
set lines 900
set pages 9999
set newpage none
set embedded on
set colsep ','
set trimspool on
set echo off
spool test6.lst
select * from t;
spool off
EOF
# remove the lines that have the sql prompt: SQL>
perl -pi -e "s/SQL\>.*$|^$\n//g" test6.lst
$
$ # run the script, dump stdout to the null device
$ create_csv.sh 1>/dev/null
$
$ cat test6.lst
1,a
2,b
3,c
4,d
$
$Note that the "test6.lst" on my system had the prompt "SQL>". You will have to tweak that regular expression so that it works for the prompt in your "test6.lst" file.
pratz
Similar Messages
-
Problem with tokenized input from command line
I am trying to take an input from the command line, parse it to tokens and perform whatever operation is needed depending on the name of the token, on a binary tree of stacks for example, if i type 1 2 1 3 printLevelOrder, then the root of the tree should have 3, 2,1 in the stack, the left child should have 1 and the right child should be empty. and then a level order print of the tree should be performed.
however what is happening when i run this code is the numbers are being put into the right stacks of the tree, but any commands such as printLevelOrder or PrintPopRoot are entering the code that is for placing numbers onto the stack instead of executing that command and skipping past this piece of code.
so my question is, why is the if statement if (word =="printLevelOrder") not being executed when thats whats in the word ?
example input and output shown below code fragment.
try {
BufferedReader in = new BufferedReader(new InputStreamReader(System.in));
String line = "";
while (line != "***") {
System.out.print("> prompt ");
line = in.readLine();
StringTokenizer tokenizer = new StringTokenizer(line," ");
String word = new String();
while (tokenizer.hasMoreTokens()) {
word = tokenizer.nextToken();
boolean notCommand = true;
if (word =="printLevelOrder") {
theTree.printLevelOrder();
System.out.println("(word ==printLevelOrder)");
notCommand=false;
if (word == "printPopLevelOrder") {
theTree.printPopLevelOrder();
notCommand=false;
if (word == "printPopInorder") {
theTree.printPopInorder();
notCommand=false;
if (word == "printPopPreorder") {
theTree.printPopPreorder();
notCommand=false;
if (word == "printPopRoot") {
theTree.printPopRoot();
notCommand=false;
if (word == "***") {
notCommand=false;
if (notCommand == true) {
System.out.println("(notCommand == true)");
boolean notPlaced = true;
int v = 1;
while ((notPlaced==true) && (v < theTree.size())) {
if (theTree.element(v).isEmpty()) {
theTree.element(v).push(Integer.valueOf(word));
System.out.println("Inserting"+word);
System.out.println("in empty stack at location: "+v);
notPlaced=false;
if (notPlaced==true) {
if ( Integer.valueOf(word) >= Integer.valueOf( theTree.element(v).top().toString() ) ) {
theTree.element(v).push(Integer.valueOf(word));
System.out.println("Inserting"+word);
System.out.println("in stack at location: "+v);
notPlaced=false;
v++;
}valid inputs: int value, printLevelOrder, printPopLevelOrder, printPopInorder, p
rintPopPreorder, printPopRoot, *** to quit
prompt 1 3 2 4 2 printLevelOrder(notCommand == true)
Inserting1
in empty stack at location: 1
(notCommand == true)
Inserting3
in stack at location: 1
(notCommand == true)
Inserting2
in empty stack at location: 2
(notCommand == true)
Inserting4
in stack at location: 1
(notCommand == true)
Inserting2
in stack at location: 2
(notCommand == true)
Exception in thread "main" java.lang.NumberFormatException: For input string: "printLevelOrder"
at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
at java.lang.Integer.parseInt(Integer.java:447)
at java.lang.Integer.valueOf(Integer.java:553)
at TreeStack.main(TreeStack.java:73)
Press any key to continue . . .lol aww, shame that you forgot to do that. i had 10 / 10 for mine, and seing as the deadline is now well and trully over,
here is the entire source for anybody who was following the discussion or whatever and wanted to experiment.
additional files needed >
http://users.cs.cf.ac.uk/Paul.Rosin/CM0212/Stack.java
http://users.cs.cf.ac.uk/Paul.Rosin/CM0212/ArrayStack.java
http://users.cs.cf.ac.uk/Paul.Rosin/CM0212/StackEmptyException.java
http://users.cs.cf.ac.uk/Paul.Rosin/CM0212/StackFullException.java
/*TreeStack.java - reads command line input of values and assigns them to stacks in a binary tree and performs
operations on the ADT. valid inputs: <int>, printLevelOrder, printPopLevelOrder,
printPopInorder, printPopPreOrder, printPopRoot. Terminates on invalid input.
Written by George St. Clair.
S/N:0208456 22/11/2005
import java.util.Vector;
import java.io.*;
import java.util.StringTokenizer;
public class TreeStack {
private final int TREE_CAPACITY = 7 + 1;
private final int STACK_CAPACITY = 10;
Vector tree = new Vector(TREE_CAPACITY) ;
//collect input from command line, add values to stacks at nodes of the teee
//and perform required operations on the treestack
public static void main (String [] args) {
//create a tree of stacks
TreeStack theTree = new TreeStack ();
try {
//collect standard input
BufferedReader in = new BufferedReader(new InputStreamReader(System.in));
String line = "";
while (line != null) {
System.out.print("");
line = in.readLine();
//tokenise input
StringTokenizer tokenizer = new StringTokenizer(line," ");
String word = new String();
while (tokenizer.hasMoreTokens()) {
//assign word to the token
word = tokenizer.nextToken();
boolean notCommand = true;
//perform operation on treestack depending on what word is
if (word.equals("printLevelOrder")) {
System.out.println("printLevelOrder");
theTree.printLevelOrder();
notCommand=false;
if (word.equals("printPopLevelOrder")) {
System.out.println("printPopLevelOrder");
theTree.printPopLevelOrder();
notCommand=false;
if (word.equals("printPopInorder")) {
System.out.println("printPopInorder");
theTree.printPopInorder();
notCommand=false;
if (word.equals("printPopPreorder")) {
System.out.println("printPopPreorder");
theTree.printPopPreorder();
notCommand=false;
if (word.equals("printPopRoot")) {
System.out.println("printPopRoot");
theTree.printPopRoot();
notCommand=false;
//if word was not a command it must be a number
if (notCommand == true) {
boolean notPlaced = true;
int v = 1;
//starting at the root, find suitable place for number
while ((notPlaced==true) && (v < theTree.size())) {
//if the stack at v is empty, number goes here
if (theTree.element(v).isEmpty()) {
theTree.element(v).push(Integer.valueOf(word));
System.out.println("inserting: "+word);
System.out.println("in empty stack at location: "+(v-1));
notPlaced=false;
//if the stack is not empty
if (notPlaced==true) {
//if the value on the top of the stack is smaller than number, number goes onto the stack
if ( Integer.valueOf(word) > Integer.valueOf( theTree.element(v).top().toString() ) ) {
theTree.element(v).push(Integer.valueOf(word));
System.out.println("inserting: "+word);
System.out.println("in stack at location: "+(v-1));
notPlaced=false;
//if that node was no good, check the next one for suitability
v++;
catch (Exception e) {
//occurs when user inputs something that is neither a command, or a number, or upon EOF, or stack is full
public TreeStack () {
//create the TreeStack ADT by adding stacks in the vector, note vector 0 is instantiated but not used.
for (int i = 1;i<=TREE_CAPACITY;i++)
tree.add(new ArrayStack(STACK_CAPACITY));
public int size() {
//return the size of the tree +1 (as 0 is not used)
return tree.size();
public ArrayStack element (int v) {
//return the ArrayStack at v
return (ArrayStack)tree.get(v);
public int leftChild (int v ) {
//return left child of v
return v*2;
public int rightChild (int v ) {
//return the right child of v
return v*2+1;
public boolean children (int v ) {
//search for children of v and return true if one exists
for (int i =v;i<size();i++) {
if (i/2==v ) {
//left child found at i
return true;
if ((i-1)/2==v ) {
//right child found at i
return true;
//no children found
return false;
public boolean isInternal (int v ) {
//test whether node v is internal (has children)
if (children (v)== true) {
//has children
return true;
return false;
//print the top value in each stack encountered on a level-order traversal of tree
public void printLevelOrder() {
//for every node of tree v
for (int v = 1;v<size();v++) {
if (!element(v).isEmpty() ) {
//print the top value in stack v
System.out.println(" "+element(v).top());
else {
//stack at v is empty
System.out.println(" -");
//pop off and print the top value in each stack encountered on a level-order traversal of tree
public void printPopLevelOrder () {
//pop off and print the top value in stack v
for (int v = 1;v<size();v++) {
//for each node of tree v
if (!element(v).isEmpty() ) {
//if v isnt empty print the top value in stack v
System.out.println(" "+element(v).top());
//pop the top value in the stack at v
element(v).pop();
else {
//stack at v is empty
System.out.println(" -");
//pop off and print the top value in each stack encountered on an in-order traversal of tree
public void printPopInorder () {
printPopInorder (1);
public void printPopInorder (int v) {
boolean isInternal = false;
if (isInternal (v)) {
//use a boolean for isInternal to save on running the method twice
isInternal = true;
//recursively search left subtree
printPopInorder (leftChild(v));
//pop off and print the top value at v
if (element(v).isEmpty() ) {
//stack at v is empty
System.out.println(" -");
else {
//if v isnt empty print the top value in stack v then pop
System.out.println(" "+element(v).top());
element(v).pop();
if (isInternal ) {
//recursively search right subtree
printPopInorder (rightChild(v));
//pop off and print the top value in each stack encountered on an pre-order traversal of tree
public void printPopPreorder() {
printPopPreorder(1);
public void printPopPreorder(int v) {
//pop off and print the top value at v
if (!element(v).isEmpty() ) {
//if v isnt empty print the top value in stack v then pop
System.out.println(" "+element(v).top());
element(v).pop();
else {
//stack at v is empty
System.out.println(" -");
if (isInternal (v)) {
//recursively search left and right subtrees
printPopPreorder (leftChild(v));
printPopPreorder (rightChild(v));
//pop off and print all values from the stack at the root
public void printPopRoot (){
//while the root stack has values left
while (!element(1).isEmpty()) {
//print, then pop
System.out.println(" "+element(1).top());
element(1).pop();
} -
How to run adt.bat created installer silently from command line?
All,
I totally get how to create an installer like so:
adt -package -target native c:\AirExe\myApp.exe c:\AirExe\myAirApp.air
Is it possible to run the installer silently from the command line? Part of our smoke test process is to do nightly builds which would include the adt command above. What we're missing right now is automatically copying the installer to a QA machine and silently install from the command line. Currently, we have a QA engineer manually running the GUI installer.
We want to automate as much of our process as possible and without installing silently from the command line, we're kind of dead in the water for automating this process. Thanks...
MattSpent an hour last Friday on hold with Adobe support, bounced around to 4 different CSR's and no love getting my question answered.
I spent part of my weekend solving this. I'm sure there are other solutions, but here goes:
1) Downloaded the 7-Zip utility from here: http://www.7-zip.org/
2) Added c:/Program Files/7-Zip to my path (this helped with interactive testing from the command line)
3) Made the following edit to my ant build.properties file:
a) 7_ZIP_HOME=C:/Program Files/7-Zip
4) Made the following edit to my ant build.xml file:
a) <exec executable="${7_ZIP_HOME}/7z.exe">
<arg line="x build/INSTALLER_CREATED_WITH_ADT.exe -obuild -y"/>
</exec>
Hope this saves someone else a little time...
-M -
Problem running DNG Converter from command line in Windows XP
I'm a frustrated user trying to run Adobe DNG converter from the Windows command line - more specifically from a batch file.
- Am reasonably conversant with writing batch files
- Have read the PDF file provided by Adobe
I just can't figure the correct syntax for adding the command line parameters and, unfortunately, the Adobe PDF file doesn't have verbose examples for idiots like me. Nor can I find any such examples on the Net, or any discussion of this problem in the forums.
The Adobe PDF instructions state...
"The parameter list includes the conversion options you want to use, followed by the names of the files to convert."
As there is no switch to prefix 'the names of the files to convert' I assume I just leave a space and include the path to the source files at the end of the parameter list?
Here is the batch file line I am trying to use...
"C:\Program Files\Adobe\Adobe DNG Converter.exe [parameter list]"
Where I want to specify in the [parameter list] that...
(a) The destination directory (-d <directory> parameter) is c:\DNG_files
(b) And the source files are in directory c:\RAW_files
Here is the batch line with the parameters entered...
"C:\Program Files\Adobe\Adobe DNG Converter.exe -dC:\RAW_files c:\DNG_files"
I've tried variations of this with space between -d and C:\RAW_files and C:\DNG_files\*.* for the source files parameter.
I just keep getting DOS erros like "The filename, directory name or volume label syntax is incorrect"
Can anybody help me. I'm clueless how to solve the problem. :-(
I'm running DNG COnverter version 4.2
Thanks in anticipation.
RobThanks for responding G Sch.
LOL. Well this lemming doesn't habitually rename .exe files (e.g. Adobe DNG Converter.exe) to a non-spaced alternative either! (Adobe_DNG_Converter.exe)
Still no luck...
*** Here is my batch file...
REM Copy and DNG-convert files from CF
CD c:\RAW_files
dir c:\RAW_files
"C:\Program Files\Adobe\Adobe DNG Converter.exe" -d C:\DNG_files
dir c:\DNG_files
pause
***Here's the DOS shell output...
<<BEGINS>>
C:\RAW_files>dir c:\RAW_files
Volume in drive C is Local Disk
Volume Serial Number is D084-58ED
Directory of c:\RAW_files
12/03/2008 10:29 AM <DIR> .
12/03/2008 10:29 AM <DIR> ..
11/03/2008 07:00 AM 10,661,632 _3110455.ORF
11/03/2008 07:01 AM 10,661,632 _3110457.ORF
11/03/2008 07:01 AM 10,661,632 _3110458.ORF
11/03/2008 07:02 AM 10,661,632 _3110460.ORF
11/03/2008 07:02 AM 10,661,632 _3110461.ORF
11/03/2008 07:03 AM 10,661,632 _3110462.ORF
11/03/2008 07:03 AM 10,661,632 _3110463.ORF
11/03/2008 07:04 AM 10,661,632 _3110464.ORF
11/03/2008 07:04 AM 10,661,632 _3110465.ORF
9 File(s) 95,954,688 bytes
2 Dir(s) 2,619,731,968 bytes free
C:\RAW_files>"C:\Program Files\Adobe\Adobe DNG Converter.exe" -d C:\DNG_files
C:\RAW_files>dir c:\DNG_files
Volume in drive C is Local Disk
Volume Serial Number is D084-58ED
Directory of c:\DNG_files
12/03/2008 02:46 PM <DIR> .
12/03/2008 02:46 PM <DIR> ..
0 File(s) 0 bytes
2 Dir(s) 2,619,731,968 bytes free
C:\RAW_files>pause
Press any key to continue . . .
<<ENDS>>
As you can see (a) Source files exist(b) DNG command line runs without generating an error (c) no output files in destination.
DNG Converter did not run.
If I remove everything after the command (i.e. the parameter list stuff) it fires up DNG Converter in interactive mode. Not what I'm after.
Any other thoughts on what the problem is?
Thank you.
Rob -
How to create OID attributes from command line in unix system
Hi,
I have to create OID attributes through ldif files in unix system. I dont know how to run it in unix system under which folder. I already have ldif files for creating OID attributes. Please help.Hi,
unser the /your_ODI_HOME/agent/bin folder.
Excute this
sh startscen.sh REFRESH_ID 001 GLOBAL 5 -NAME=agent_ODI
REFRESH_ID=Your Scenario name
001:Version
GLOBAL:Context name
5=Log Level
agent_ODI=Your agent name
Regards -
Create domain from command line failed in wls91
Hi,
I am trying to create a simple domain from command line for wls91. It even didn't ask me the password. How can I do it? Thanks
C:\testdomain>java weblogic.Server
<Feb 23, 2006 9:11:50 AM PST> <Info> <WebLogicServer> <BEA-000377> <Starting Web
Logic Server with BEA JRockit(R) Version R26.0.0-189-53463-1.5.0_04-20051122-204
1-win-ia32 from BEA Systems, Inc.>
C:\testdomain\config\config.xml not found
No config.xml was found.
Would you like the server to create a default configuration and boot? (y/n): y
<Feb 23, 2006 9:11:56 AM PST> <Info> <Management> <BEA-140013> <C:\testdomain\.\
config\config.xml not found>
<Feb 23, 2006 9:11:56 AM PST> <Info> <Security> <BEA-090065> <Getting boot ident
ity from user.>
Enter username to boot WebLogic server:weblogic
<Feb 23, 2006 9:12:00 AM PST> <Error> <Security> <BEA-090782> <Server is Running
in Production Mode and Native Library(terminalio) to read the password securely
from commandline is not found.>
<Feb 23, 2006 9:12:00 AM PST> <Notice> <WebLogicServer> <BEA-000388> <JVM called
WLS shutdown hook. The server will force shutdown now>
<Feb 23, 2006 9:12:00 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server sta
te changed to FORCE_SHUTTING_DOWN>
C:\testdomain>Hi,
If you are still having problems creating a domain from the command line, the official solution would be to use
{proper_path}/bea/weblogic{proper_version}/common/bin/config.sh -mode=console
This will guide you to the same steps as the visual version of the wizard, but using the command prompt.
If you are using windows, the same works but with the command config.cmd, and mutatis mutandis.
Regards,
LG -
Error while running a Discoverer Workbook with parameter from command line
I am trying to run a discoverer report from command line and export the results in xls on to my local machine. I could do it fine for a simple workbook, but if I add a parameter(madatory) to the workbook and run it from command line specifying the parameter value I wanted to run the report for, I do not get any results. Here is the command line I am using.
dis51usr.exe /connect user/password@database /apps_user /apps_responsibility "System Administrator" /eul EUL_US /open C:\Disco\Test.DIS /sheet Testsheet /parameter Period Jan-07 /export xls C:\Disco\X.xls /batch
Parameter value is entered in correct format(Jan-07).
When I removed /batch from this to see if I get any error, Discoverer Desktop opened up, logged in and gets terminated saying 'Oracle Discoverer Desktop has encountered a problem and need to close. We are sorry for the inconvenience.'
Did anybody come across this issue before?Hello,
If you have a few minutes, Windows is also aborting for me:
the differences are, my situation is:
a) am running the command line from a .bat file
b) am NOT running with parms, want the discoverer query to come up for the user
c) am running a query from the database
i am signing in as myself BUT running a query that was created by a generic user called SREG
c) if i run the .bat file from Windows Explorer, the query opens fine
d) if i execute the .bat file from within Microsoft Access using the shell command,
the query opens and then aborts RIGHT BEFORE the parm screen would display
e) btw, if i modify the .bat file, to run a query from MY database signon, then (d) - running .bat file
from vb using SHELL command works
Do you have a ideas as to why (d) does not work? I would be very grateful for your time, tx, sandra
this is what i posted yesterday, tx: Re: Running Discoverer command line
tx, sandra -
Unable to build and run Javapetstore using Sun SDK from Command Line
Hi,
Here is a problem I?ve come across building and running JavaPetstore from Command Line using Ant.
It shows that Build is successful but there is an error message in very beginning:
?Unable to locate tools. jar. Expected to find it in C:\Program Files\Java\jre 1.5.0_11\lib\tools.jar?
But there is no such a file in jre-1.5.0_11 or previous versions.
The only place where the file with such name can be found is jdk\lib.
All attempts to run end up with:
? BUILD FAILED.
C:\<PETSTORE_HOME>\bp-project\command-line-ant-task.xml:77;unable to find javac compiler;com.sun.tools.javac.Main is not on the class path.
Perhaps JAVA_HOME does not point to JDK."
Directories C:\Sun\SDK\bin and C:\Sun\SDK\jdk are in the PATH.
JAVA_HOME as a System variable is set up to C:\Sun\SDK\jdk.
Building and running other applications like a BluePrints or Samples bring to same result.
I will post more information if needed.
Thank you in advance for help.If you are using Windows XP:
1. Right click on my computer
2. Select Properties from the popup dialog
3. Click on the "Advanced" tab
4. Click the button towards the bottom that says "Environment Variables"
5. In the dialog that pops up, look in both the User variables and the System variables for a variable named CLASSPATH
6. If its not there, you need to create it. If you want to make it available to all users of your computer, create it as a System variable. If you only want it to be available to the current user, add it as a User variable.
7. If it is there, or if you just created it, it needs to contain the following values: the current directory (symbolically abbreviated as a period: "."), any class libraries you want to be available to the java compiler (javac) or the java interpreter (java). By default, jre/lib and jre/lib/ext are searched for classes, so you don't need to include anything located in one of these folders on the classpath. -
CMake behaves differently from within PKGBUILD and from command line
Hi,
I am currently struggling with an issue which I cannot find a solution. The problem is, I am trying to create a PKGBUILD for the CasADi code. The following is the PKGBUILD file written. My problem is the cmake configuration part. When the code is configured from the command line, without PKGBUILD, camke detects the -fopenmp flag for C and C++ compilers. For exactly the same compilers, cmake detects openmp for C compiler but fails to do so for the C++ compiler, when configuration is done from within the PKGBUILD file using makepkg.
My question is, why different behaviors? Any suggestions on what is wrong?
pkgname=casadi-git
pkgver=0
pkgrel=1
pkgdesc="A symbolic framework for automatic differentiation and numeric optimization"
arch=('i686' 'x86_64')
url=""
license=('GPL')
groups=()
depends=('sundials' 'ipopt' 'blas' 'lapack' 'python2')
makedepends=('cmake' 'swig')
checkdepends=()
optdepends=()
provides=('casadi')
conflicts=()
replaces=()
backup=()
options=()
install=
changelog=
source=('casadi::git+https://github.com/casadi/casadi.git')
md5sums='SKIP'
build() {
cd "$srcdir/casadi"
sed -i 's/PythonLibs/PythonLibs 2.7/g' ./cmake_modules/FindNUMPY.cmake ./swig/CMakeLists.txt
cmake . -DCMAKE_INSTALL_PREFIX=/usr \
-DPYTHON_EXECUTABLE=/usr/bin/python2 \
-DWITH_DL:BOOL=ON \
-DWITH_LLVM:BOOL=OFF \
-DWITH_PYTHON_INTERRUPTS:BOOL=ON \
-DWITH_OPENMP:BOOL=ON \
-DWITH_OOQP:BOOL=ON \
-DWITH_DOC:BOOL=ON \
-DWITH_OPENCL:BOOL=OFF
make
package() {
cd "$srcdir/casadi"
make DESTDIR="$pkgdir/" install
Output when cmake is run from command line
-- The C compiler identification is GNU 4.8.1
-- The CXX compiler identification is GNU 4.8.1
-- Check for working C compiler: /usr/bin/colorgcc
-- Check for working C compiler: /usr/bin/colorgcc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/c++
-- Check for working CXX compiler: /usr/bin/c++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- The Fortran compiler identification is GNU
-- Check for working Fortran compiler: /usr/bin/gfortran
-- Check for working Fortran compiler: /usr/bin/gfortran -- works
-- Detecting Fortran compiler ABI info
-- Detecting Fortran compiler ABI info - done
-- Checking whether /usr/bin/gfortran supports Fortran 90
-- Checking whether /usr/bin/gfortran supports Fortran 90 -- yes
-- Flag needed for enabling C++11 features: -std=gnu++11
-- x86_64 architecture detected - setting flag -fPIC
-- Try OpenMP C flag = [-fopenmp]
-- Performing Test OpenMP_FLAG_DETECTED
-- Performing Test OpenMP_FLAG_DETECTED - Success
-- Try OpenMP CXX flag = [-fopenmp]
-- Performing Test OpenMP_FLAG_DETECTED
-- Performing Test OpenMP_FLAG_DETECTED - Success
-- Found OpenMP: -fopenmp
-- Looking for Fortran sgemm
-- Looking for Fortran sgemm - found
-- Looking for include file pthread.h
-- Looking for include file pthread.h - found
-- Looking for pthread_create
-- Looking for pthread_create - found
-- Found Threads: TRUE
-- Found LibXml2: /usr/lib64/libxml2.so (found version "2.9.1")
-- A library with BLAS API found.
-- Looking for Fortran cheev
-- Looking for Fortran cheev - found
-- A library with LAPACK API found.
-- Found PkgConfig: /usr/bin/pkg-config (found version "0.28")
-- checking for one of the modules 'ipopt'
-- Detected an IPOPT configuration without development headers. Build will proceed, but without callback functionality. To enable it, see https://github.com/casadi/casadi/wiki/enableIpoptCallback
-- Detected an IPOPT configuration without sIPOPT headers. Build will proceed, but without sIPOPT functionality.
-- Found IPOPT: ipopt;lapack;blas;m;dl;coinmumps;pthread;blas;gfortran;m;gcc_s;quadmath;coinmetis
-- Could not find KNITRO include dir
-- Could not find KNITRO library
-- Could not find CPLEX include dir
-- Could not find CPLEX libraries
-- Could not find MA57
-- MA57 libraries not found. Falling back to MA27
-- Could not find MA27
-- Could not find OOQP include dir
-- Could not find SNOPT include dir
-- Found Snopt libs: /usr/lib64/libf2c.a;/usr/lib64/liblapack.so;/usr/lib64/libblas.so;dl
-- Could not find MATLAB include dir
-- Could not find Matlab libs
-- Could not find SNOPT include dir
-- Found Snopt libs: /usr/lib64/libf2c.a;/usr/lib64/liblapack.so;/usr/lib64/libblas.so;dl
-- Could not find MATLAB include dir
-- Could not find Matlab libs
-- Found SWIG: /usr/bin/swig (found version "2.0.10")
-- Found PythonLibs: /usr/lib64/libpython2.7.so (found suitable version "2.7.5", minimum required is "2.7")
-- Python executable is /home/hamid/bin/python
-- numpy.get_include() is /usr/lib/python2.7/site-packages/numpy/core/include
-- Numpy path found: /usr/include/python2.7/numpy
-- Python libs: /usr/lib64/libpython2.7.so
-- Numpy includes: /usr/include/python2.7/numpy;/usr/include
-- Numpy libs: /usr/lib64/python2.7/site-packages/numpy/core/multiarray.so
-- Found PythonInterp: /home/hamid/bin/python (found version "2.7.5")
-- Found Doxygen: /usr/bin/doxygen (found version "1.8.4")
-- Found DOXYFILE_IN: /usr/src/AUR/build/casadi/src/casadi/documentation/api-doc/Doxyfile.in
-- pyreport not found -- try 'easy_install pyreport'
-- The following features have been enabled:
* dynamic-loading , Compile with support for dynamic loading of generated functions (needed for ExternalFunction)
* using-c++11 , Using C++11 features (improves efficiency and is required for some examples).
* sundials-interface , Interface to the ODE/DAE integrator suite SUNDIALS.
* csparse-interface , Interface to the sparse direct linear solver CSparse.
* lapack-interface , Interface to LAPACK.
* ipopt-interface , Interface to the NLP solver Ipopt.
* qpoases-interface , Interface to the active-set QP solver qpOASES.
* dsdp-interface , Interface to the interior point SDP solver DSDP (requires BLAS and LAPACK).
-- The following OPTIONAL packages have been found:
* OpenMP
* LibXml2
* BLAS
* Threads
* LAPACK
* PkgConfig
* IPOPT
* SWIG
* NUMPY
* PythonInterp
* Doxygen
-- The following features have been disabled:
* just-in-time , Just-in-time compiliation via the LLVM compiler framework.
* opencl-support , Enable just-in-time compiliation to CPUs and GPUs with OpenCL.
* get-ipopt , Download and build Ipopt.
* knitro-interface , Interface to the NLP solver KNITRO.
* cplex-interface , Interface to the QP solver CPLEX.
* ooqp-interface , Interface to the QP solver OOQP (requires BLAS).
* worhp-inteface , Interface to the NLP solver Worhp (requires LibXml2 headers).
-- The following OPTIONAL packages have not been found:
* KNITRO
* CPLEX
* MA57
* MA27
* OOQP
* MATLAB
* OCTAVE
* LATEX
* PYREPORT
-- Configuring done
-- Generating done
Output when running makepkg
-- The C compiler identification is GNU 4.8.1
-- The CXX compiler identification is GNU 4.8.1
-- Check for working C compiler: /usr/bin/colorgcc
-- Check for working C compiler: /usr/bin/colorgcc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/c++
-- Check for working CXX compiler: /usr/bin/c++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- The Fortran compiler identification is GNU
-- Check for working Fortran compiler: /usr/bin/gfortran
-- Check for working Fortran compiler: /usr/bin/gfortran -- works
-- Detecting Fortran compiler ABI info
-- Detecting Fortran compiler ABI info - done
-- Checking whether /usr/bin/gfortran supports Fortran 90
-- Checking whether /usr/bin/gfortran supports Fortran 90 -- yes
-- Flag needed for enabling C++11 features: -std=gnu++11
-- x86_64 architecture detected - setting flag -fPIC
-- Try OpenMP C flag = [-fopenmp]
-- Performing Test OpenMP_FLAG_DETECTED
-- Performing Test OpenMP_FLAG_DETECTED - Success
-- Try OpenMP CXX flag = [-fopenmp]
-- Performing Test OpenMP_FLAG_DETECTED
-- Performing Test OpenMP_FLAG_DETECTED - Failed
-- Try OpenMP CXX flag = [/openmp]
-- Performing Test OpenMP_FLAG_DETECTED
-- Performing Test OpenMP_FLAG_DETECTED - Failed
-- Try OpenMP CXX flag = [-Qopenmp]
-- Performing Test OpenMP_FLAG_DETECTED
-- Performing Test OpenMP_FLAG_DETECTED - Failed
-- Try OpenMP CXX flag = [-openmp]
-- Performing Test OpenMP_FLAG_DETECTED
-- Performing Test OpenMP_FLAG_DETECTED - Failed
-- Try OpenMP CXX flag = [ ]
-- Performing Test OpenMP_FLAG_DETECTED
-- Performing Test OpenMP_FLAG_DETECTED - Failed
-- Try OpenMP CXX flag = [-xopenmp]
-- Performing Test OpenMP_FLAG_DETECTED
-- Performing Test OpenMP_FLAG_DETECTED - Failed
-- Try OpenMP CXX flag = [+Oopenmp]
-- Performing Test OpenMP_FLAG_DETECTED
-- Performing Test OpenMP_FLAG_DETECTED - Failed
-- Try OpenMP CXX flag = [-qsmp]
-- Performing Test OpenMP_FLAG_DETECTED
-- Performing Test OpenMP_FLAG_DETECTED - Failed
-- Try OpenMP CXX flag = [-mp]
-- Performing Test OpenMP_FLAG_DETECTED
-- Performing Test OpenMP_FLAG_DETECTED - Failed
-- Could NOT find OpenMP (missing: OpenMP_CXX_FLAGS)
-- Looking for Fortran sgemm
-- Looking for Fortran sgemm - found
-- Looking for include file pthread.h
-- Looking for include file pthread.h - found
-- Looking for pthread_create
-- Looking for pthread_create - not found
-- Looking for pthread_create in pthreads
-- Looking for pthread_create in pthreads - not found
-- Looking for pthread_create in pthread
-- Looking for pthread_create in pthread - found
-- Found Threads: TRUE
-- Found LibXml2: /usr/lib64/libxml2.so (found version "2.9.1")
-- A library with BLAS API found.
-- Looking for Fortran cheev
-- Looking for Fortran cheev - found
-- A library with LAPACK API found.
-- Found PkgConfig: /usr/bin/pkg-config (found version "0.28")
-- checking for one of the modules 'ipopt'
-- Detected an IPOPT configuration without development headers. Build will proceed, but without callback functionality. To enable it, see https://github.com/casadi/casadi/wiki/enableIpoptCallback
-- Detected an IPOPT configuration without sIPOPT headers. Build will proceed, but without sIPOPT functionality.
-- Found IPOPT: ipopt;lapack;blas;m;dl;coinmumps;pthread;blas;gfortran;m;gcc_s;quadmath;coinmetis
-- Could not find KNITRO include dir
-- Could not find KNITRO library
-- Could not find CPLEX include dir
-- Could not find CPLEX libraries
-- Could not find MA57
-- MA57 libraries not found. Falling back to MA27
-- Could not find MA27
-- Could not find OOQP include dir
-- Could not find SNOPT include dir
-- Found Snopt libs: /usr/lib64/libf2c.a;-lpthread;/usr/lib64/liblapack.so;/usr/lib64/libblas.so;dl
-- Could not find MATLAB include dir
-- Could not find Matlab libs
-- Could not find SNOPT include dir
-- Found Snopt libs: /usr/lib64/libf2c.a;-lpthread;/usr/lib64/liblapack.so;/usr/lib64/libblas.so;dl
-- Could not find MATLAB include dir
-- Could not find Matlab libs
-- Found SWIG: /usr/bin/swig (found version "2.0.10")
-- Found PythonLibs: /usr/lib64/libpython2.7.so (found suitable version "2.7.5", minimum required is "2.7")
-- Python executable is /usr/bin/python2
-- numpy.get_include() is /usr/lib/python2.7/site-packages/numpy/core/include
-- Numpy path found: /usr/include/python2.7/numpy
-- Python libs: /usr/lib64/libpython2.7.so
-- Numpy includes: /usr/include/python2.7/numpy;/usr/include
-- Numpy libs: /usr/lib64/python2.7/site-packages/numpy/core/multiarray.so
-- Found PythonInterp: /usr/bin/python2 (found version "2.7.5")
-- Found Doxygen: /usr/bin/doxygen (found version "1.8.4")
-- Found DOXYFILE_IN: /usr/src/AUR/build/casadi/src/casadi/documentation/api-doc/Doxyfile.in
-- pyreport not found -- try 'easy_install pyreport'
-- The following features have been enabled:
* dynamic-loading , Compile with support for dynamic loading of generated functions (needed for ExternalFunction)
* using-c++11 , Using C++11 features (improves efficiency and is required for some examples).
* sundials-interface , Interface to the ODE/DAE integrator suite SUNDIALS.
* csparse-interface , Interface to the sparse direct linear solver CSparse.
* lapack-interface , Interface to LAPACK.
* ipopt-interface , Interface to the NLP solver Ipopt.
* qpoases-interface , Interface to the active-set QP solver qpOASES.
* dsdp-interface , Interface to the interior point SDP solver DSDP (requires BLAS and LAPACK).
-- The following OPTIONAL packages have been found:
* LibXml2
* BLAS
* Threads
* LAPACK
* PkgConfig
* IPOPT
* SWIG
* NUMPY
* PythonInterp
* Doxygen
-- The following features have been disabled:
* just-in-time , Just-in-time compiliation via the LLVM compiler framework.
* opencl-support , Enable just-in-time compiliation to CPUs and GPUs with OpenCL.
* get-ipopt , Download and build Ipopt.
* knitro-interface , Interface to the NLP solver KNITRO.
* cplex-interface , Interface to the QP solver CPLEX.
* ooqp-interface , Interface to the QP solver OOQP (requires BLAS).
* worhp-inteface , Interface to the NLP solver Worhp (requires LibXml2 headers).
-- The following OPTIONAL packages have not been found:
* OpenMP
* KNITRO
* CPLEX
* MA57
* MA27
* OOQP
* MATLAB
* OCTAVE
* LATEX
* PYREPORT
-- Configuring done
-- Generating doneWith a little creativity, you can actually do all that from the command line with a single command. It'll look a little crazy, but it can be done.
Whether the script exists on the local machine or not has zero to do with platform indpendence. You assumedly have to get the application onto the local machine, so including the script is not really an issue at all. However, you're talking about system independence, yet still wishing to run command line arguments? The two are mutually exclusive. -
How to send report output to two detinations at a time from command line?
Hi ,
how to send my report to two detinations at a time from command line i.e FILE and Mail ?
i created batchfile in that i mentioned one line for file(DESTYPE=FILE) perpose and another line for mail perpose(DESTYPE=Mail).i don't want to mention to lines.
i want to send my report out put two destinations at a time insted of running two times.
thx in advance.....
raghuhello,
did you try to use distribution for that ? check out the reports distribution facilities available in 6i.
regards,
the oracle reports team -
I can not uninstall Office 2013 from command line
Hi, I have been stuck for a while trying to uninstall Office 2013 via command line. Installation file was downloaded from Volume Licensing Service Center, Uninstall.xml file for silent uninstallation looks like this:
<Configuration Product=”ProPlus”>
<Display Level=”basic” CompletionNotice=”yes” SuppressModal=”yes” AcceptEula=”yes” />
</Configuration>
From command line the following will not work:
setup /uninstall ProPlus /config .\ProPlus.ww\Uninstall.xml
Error: Setup can not find or validate an installation file. Please try reinstalling Office . . .
setup /uninstall ProPlus gives me GUI to continue process - it seems /config .\ProPlus.ww\Uninstall.xml part does not work as it should be
This is very important to me since I used above command line in SCCM 2012 R2 to allow user to uninstall Office 2013 by itself via Software Center. When this failed I tried locally but the error was the same. This should have been trivial task - silent uninstallation
using .xml file. It is not a rocket science. I am very angry because losing time for something like this is unacceptable for system engineers working with SCCM 2012 R2.Hi,
This error might occurs due to lots of reasons. Where is the installation file stored? If it's stored on a network share, please copy it to your local disk, and then manually run the command again. This way, we'll see if the installation file is the
problem.
If issue persists in this case, then this generally means that something wrong with the installation file. Please try to redownload it and then try again.
Please also make sure that you're executing the command with elevated privileges (run as administrator).
Regards,
Ethan Hua
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here -
How to run a 10g report from command line ?
Good Afternoon,
Please advise if there is a way to run a 10g report from command line.
We use 6i right now and our job scheduler runs reports using "D:\ORADEV6I\BIN\RWRUN60.EXE ..." executable in batch mode on a separate server. We plan to migrate to 10g Database, Forms, Reports. Is there a way to keep this functionality and create a "command" to address an report server and run a report?
Thank you,
DmitriSteps to take.
(1.) In command prompt type RWSERVER SERVER=repserver1 to star the rep server.
(2.) If you get "Javaw.exe The procedure entry point psoasyn could not be located in the dynamic link library orapls10.dll." error do one of the following
(a.) Type the full name for the server. D:\OracleDevR2\bin\rwserver SERVER=repserver1
or, if it does not work
(b.) Add D:\OracleDevR2\bin to the system env. variable PATH
(3.) Start OC4j
(4.) Now you can access the jobs using URL like:
http://192.161.11.143:8890/reports/rwservlet/showjobs?server=repserver1
where 192.161.11.143 is your machine's IP address. -
To run a report from command line, when using jdbc-odbc bridge
Hi,
How to run a report from command line, when using jdbc-odbc bridge?
Usually with tns, we do by "rwrun module=<> userid=<user>/<passwd>@tns".
with odbc, we do by "rwrun module=<> userid=<user>/<passwd>@odbc:DSN"
Please specify, what is command line arguments for jdbc-odbc bridge driver?
Environment : Oracle 9i Report Builder on WinNT
Database : Sybase
Regards,
RamananHello Ramanan,
Report Builder : connect JDBC Query in Report Builder is to through Connection Dialog in JDBC Query Editor. User can use a Sign on parameter (can use, default : P_JDBCPDS or can create new) to connect to JDBC Data Source. Connection once made will be mentioned and will be reused through out Reports Builder.
JDBC PDS allows user to connect one or more same or different kind of databases.
While running report through runtime or Server, user can pass the sign on parameter(connection string) value, like any other user parameter.
Syntax for connection string : <username>/<password>@databaseURL . The syntax of database part of connection string depend on the type of JDBC Driver used to connect to Data Source while designing the JDBC Query. databaseURL refer to the location of the database and its format depend on the JDBCPDS river selected in design time while creating the JDBC Query.
rwrun eg :
rwrun report=jdbc_odbc.rdf destype=file desname=output.html desformat=html P_JDBCPDS=scott/tiger@database
Server eg :
http://server.com:8888/servlet/RWServlet?server=MyReportServer+report=jdbc_odbc.rdf+destype=cache+desformat=html+P_JDBCPDS=scott/tiger@database
http :
Please see ORACLE_HOME/reports/conf/jdbcpds.conf for more information.
With Regards
Reports Team -
Error while running ADF-BC Test Suite from command line
Hi,
I have created a separate test project containing the Test Suite for the Model componenet of my ADF-BC application.
I need to run this test project separately from jmeter.
The tests run fine from Jdev, But when I package the test project into a jar and try to run from command line, I get the following error:
java.lang.NoClassDefFoundError: oracle/jbo/ApplicationModule
at com.oracle.cs.cap.module.applicationModule.ServiceAMFixture.<init>(ServiceAMFixture.java:36)
at com.oracle.cs.cap.module.applicationModule.ServiceAMFixture.<clinit>(ServiceAMFixture.java:15)
at com.oracle.cs.cap.module.view.EntitlementReportDurationViewVO.EntitlementReportDurationViewVOTest.<init>(EntitlementReportDurationViewVOTest.java:11)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at org.junit.internal.runners.JUnit4ClassRunner.createTest(JUnit4ClassRunner.java:72)
at org.junit.internal.runners.JUnit4ClassRunner.invokeTestMethod(JUnit4ClassRunner.java:79)
at org.junit.internal.runners.JUnit4ClassRunner.runMethods(JUnit4ClassRunner.java:51)
at org.junit.internal.runners.JUnit4ClassRunner$1.run(JUnit4ClassRunner.java:44)
at org.junit.internal.runners.ClassRoadie.runUnprotected(ClassRoadie.java:27)
at org.junit.internal.runners.ClassRoadie.runProtected(ClassRoadie.java:37)
at org.junit.internal.runners.JUnit4ClassRunner.run(JUnit4ClassRunner.java:42)
at org.junit.internal.runners.CompositeRunner.runChildren(CompositeRunner.java:33)
at org.junit.runners.Suite.access$000(Suite.java:26)
at org.junit.runners.Suite$1.run(Suite.java:93)
at org.junit.internal.runners.ClassRoadie.runUnprotected(ClassRoadie.java:27)
at org.junit.internal.runners.ClassRoadie.runProtected(ClassRoadie.java:37)
at org.junit.runners.Suite.run(Suite.java:91)
at org.junit.internal.runners.CompositeRunner.runChildren(CompositeRunner.java:33)
at org.junit.internal.runners.CompositeRunner.run(CompositeRunner.java:28)
at org.junit.runner.JUnitCore.run(JUnitCore.java:130)
at org.junit.runner.JUnitCore.run(JUnitCore.java:109)
at org.junit.runner.JUnitCore.run(JUnitCore.java:100)
at org.junit.runner.JUnitCore.runMain(JUnitCore.java:81)
at org.junit.runner.JUnitCore.main(JUnitCore.java:44)
Caused by: java.lang.ClassNotFoundException: oracle.jbo.ApplicationModule
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
... 27 more
The Test project jar is created as ADF Library JAR File with Model.jpr as the dependent project. This takes care of project class dependencies
All the adf library dependencies are added to the manifest file of the Test Project jar referring to a location lib/ in the jar file directory.
I tried creating the ApplicationModule using both Configuration class (Configuration.createRootApplicationModule) as well as using the JDBC Connection String but both fail when I run the test cases independently from jmeter.
Anybody came across such an error? Please help.
Thanks,
SapnaHi Timo,
Im using JDev version 11.1.1.6.0.
I checked the class path on the jdev console. All the library references are mentioned in the manifest.mf classpath of the test project like below:
Manifest-Version: 1.0
Class-Path: lib/identitystore.jar
lib/adfm.jar
lib/groovy-all-1.6.3.jar
lib/adftransactionsdt.jar
lib/adf-dt-at-rt.jar
lib/adfdt_common.jar
lib/adflibrary.jar
lib/xmlparserv2.jar
lib/db-ca.jar
lib/jdev-cm.jar
lib/ojmisc.jar
lib/commons-el.jar
lib/jsp-el-api.jar
etc...
So I expect the library references should be resolved looking at the manifest file.
Another set of entries that I see in the jdev classpath are related to the Model project which is under test.
-classpath
D:\CurrentProject_1\16_7_2013_3pm\11_7_2013\.adf;
D:\CurrentProject_1\16_7_2013_3pm\11_7_2013\Model\classes;
How do I put these entries into my class path? Will it be sufficient if I add the Model.jar into my test project classpath?
Thanks,
Sapna -
How to restore or backup Apex application from Command line ? URGENT
We have Oracle apex 4.1 installed in Oracle 11g R2 database (windows 64-bit) 2008 R2
For some reason our database dictionary objects are corrupted.
We wanted to backup our Apex applications in some workspaces ASAP.
We are not able to access apex from http://localhost:7777/pls/apex/htmldb_login
We have an underlying database schema export (expdp).
1) Is there a way to export or backup the apex application without logging into the apex URL ? if yes how ?
2) Does Oracle has any of its own native tool to backup and restore from command line ?
Thanks in advanceMy (MS Windows) experience, if I may; perhaps you'll find something useful.
You'll find the README.TXT file in /apex/utilities directory. Read it.
In order to use APEXExport, you need JDK version 1.5 or higher. Check your version by typing (and viewing the result):
C:\>java –version
java version "1.6.0_06"
Java(TM) SE Runtime Environment (build 1.6.0_06-b02)
Java HotSpot(TM) Client VM (build 10.0-b22, mixed mode, sharing)Its directory should be part of the PATH environment variable: on my computer, directory name isC:\Program Files\Java\jre1.6.0_06\binFurthermore, Oracle JDBC class libraries must be part of the CLASSPATH environment variable. Check whether it exists (in Control Panel - System - Advanced - Environment Variables). For my 10gXE, it is here:C:\oraclexe\app\oracle\product\10.2.0\server\jdbc\lib\ojdbc14.jarI couldn't make it work; didn't know that ".\" directory must be entered into CLASSPATH as well (found that information in Arie Geller's book). Therefore, my final CLASSPATH version is:.\;C:\oraclexe\app\oracle\product\10.2.0\server\jdbc\lib\ojdbc14.jarOK, setup is done. Now, go to your /apex/utilities directory and, from the command prompt, run (mind the upper case!)java oracle.apex.APEXExportwhich will show a short help.
I chose to export the whole workspace. In order to do that, I need the workspace ID (got it from Apex's SQL Workshop; that might be a problem as you can't get there, can you? I can't tell how to find that information apart from SQL Workshop, but I'm pretty sure someone, who is much more experienced than me, will know it). OK, here's how you find it:select v('WORKSPACE_ID') from dual;Finally, here's the final step - export:C:\apex\utilities>java oracle.apex.APEXExport -db localhost:1521:xe -user scott -password tiger -workspaceid 1038408092496568The result are fxxx.sql files (where "xxx" represents application number).
I hope you'll manage to export your applications; basically, nothing special here (except that ".\" directory in the CLASSPATH variable).
Best of luck!
Maybe you are looking for
-
How to transfer video from iPhone to ipad
How do you transfer video from iPhone to ipad
-
Updating to 10.5.1
Hi, I upgraded to Leopard about 2 months ago now, and Software Update tells me there is an update to Leopard 10.5.1, and that it requires a restart. I download the update, and it appears blue screen with the dialogue box in them middle that shows the
-
I-mate WLAN connection not working
My connection was perfect before setting network key to my SMC router (SMC7904WBRA2). But after setting the key, I could connect my laptop, but not my i-mate PDA2. I can't remove the key also as I don't have the password to login to 192.168.2.1. I a
-
OBIEE 11.1.1.6 HELP
I HAVE SOME VALUES IN COLUMNS CONSIDER NUM DENO product 1 10 20 product 1 20 30 IN REPORT I HAVE TO SHOW NUM/DENO PRODUCT 1 30/50 I HAVE SUMMED NUM AND DENO BUT HOW TO SHOW THEM AS NUM/DENO ANY HELP
-
I'm trying to set up web authentication for our guest wlan. We have a WLC 5508 and I was able to get LDAP working sucessfully. Does anyone know if there is a way to read user accounts from a group instead of an OU? I was hoping to allow individual