Problems distributing application using Imaging Source USBCamera and Labview 2010 - Imaging Source sdk required?!

Hi
I've been having trouble with the Imaging Source camera we own when trying to build applications.
Everything works perfectly on the dev PC with appropriate sdk installed.
When I move to building the application (no errors) and deploying it to another PC the activeX control used to interface with the camera does not appear.
Instead I get 'Control could not be loaded' in red text where the control should be.
As far as I can see the activeX component itself is correctly installed on the PC.
If I install the IC Imaging Control sdk the application begins working correctly.
If I uninstall the sdk from the dev PC I get the message about needing a license if I attempt to add the ActiveX control afresh to the program (via the activeX container)
I've posted on the Imaging Source forums and they suggested I try here.
ORIGINAL POST ON IMAGING SOURCE FORUMS:
I'm using a DMK 41BU02 with labview 2010 + IC Labview extension.
The activeX interface for the camera works fine until I deploy it to a PC that does not have the IC Control software installed.
All I see is a 'Control could not be loaded' message where the activeX box should be.
I've installed VB6 redistributable to the client PC so I know the activeX workings should be present on the PC.
If I install IC Control onto the PC the program starts working correctly!
Has anyone compiled software with Labview 2010 successfully?
Is there a trick when creating the application/installer spec?
Thanks in advance
Dan Acres
REPLY
This is correct. I suppose, the LabVIEW setup creating system does not automatically add the used DLL in the "user.lib" directory of your LabVIEW installation path. What does the LabVIEW support say about this, especially in relation to ActiveX controls, that use the Microsoft licensing mechanism?
The dll he mentions is packaged into the support folder in the application spec.
I have also manually copied the dll into the location referenced by the software (Labview 2010\user.lib\xxxx.dll).
This made no difference.
I've got no experience building these kind of thing into applications so I cannot tell if it is caused by a mistake I've made or Labview or if the Imaging Source softwares have done something wrong.
Many thanks in Advance
Dan Acres

Dan,
I think I might have a solution for you and others who need to include the imaging source active-x control in a deployed executable program.
I solved this problem by creating a project that included the dlls and .ocx files required for the Active X Control (these files are in a folder is created once the IC Software is installed C:\Program Files (x86)\Common Files\IC Imaging Control 3.2) and an executable that registers the Active X Control after the main program is installed.
The simple vi that registered the .ocx control for me upon install of my LabVIEW executable was called RegisterActiveXCtrl.vi. All it does is calls the regsvr32 with the path of my .ocx file.
I bundled my main program PCDemo_Stratom.exe and RegICActiveX.exe into an installer and set the option to run RegICActiveX.exe at the end of installation.
The installer must be installed with administrator rights to get the RegICActiveX.exe regsvr32 call to work.
Hope this helps you/others in the future!
Dan A

Similar Messages

I use a mac ios and shoot raw in a cannon 5d mark ii and shortly upon import of my images lightroom darkens and changes my images. This has happened before but not every time. The strange part is my last shoot had the same camera setting but this did not

I use a mac ios and shoot raw in a cannon 5d mark ii and shortly upon import of my images lightroom darkens and changes my images. This has happened before but not every time. The strange part is my last shoot had the same camera setting but this did not happen. The images i have now i can not use after lightroom has automatically altered them even if i try editing back to how they looked upon import

First thing to do is to change the default camera profile applied in Lightroom to camera standard (assuming that you shoot Canon or Nikon). Also make sure that your camera is NOT set up to use any of the HDR modes. Nikon calls those Active Dynamic Lighting. On Canons you often see things like highlight priority mode or "Auto Lighting Optimizer". Make sure that the picture style is set to standard and that for newer Canons the HDR mode is turned off. Most of the HDR modes simply underexpose the image and then add an instruction in the raw file to compensate for this to prevent highlights from being blown out. This causes more noise in the shadows and if you know what you are doing there is no point to this as you should simply expose correctly and get the highest quality raw.
Lastly, make sure that in Lightroom you have not checked "Apply Auto Tone Adjustments" in Preferences->Presets. This should make the default rendering of the raw files the same as the in-camera jpeg (what the camera shows on the back even if you shoot raw) but still give you all the latitude of raw files.

Deploying J2ee application using JBOSS3.2.5 and Eclipse 3.0

Hi all
i am trying to deploy a J2EE application using JBOSS3.2.5 and Eclipse 3.0.
I have written the EJB bean, home, remote and a test JSP page. Can someone tell me the exact procedure...step by step ways to deploy the JBOSS server and run my application.
My package structure is
MyProject
ejb
client
Servlet.java
server
Bean.java
shared
home.java
remote.java
please tell the various jar files that i must include. Kindly give information about the directory structure, the xml file details and the WAR file generation.
i googled this topic..but i got the results for eclipse 2.0....
Thankz in advance
Arun :)

Don't cross-post:
http://forum.java.sun.com/thread.jsp?thread=550678&forum=13&message=2689332
http://forum.java.sun.com/thread.jsp?thread=550673&forum=31&message=2689289

I have a problem with simulation in Matlab 6.5 and LabVIEW for PID controllers

I have a problem with simulation in Matlab 6.5 and LabVIEW. I have some methods for granting PID controllers in MATLAB to go but not LabVIEW. International Teams degree to transfer two but when I go past the fourth degree no longer work. We changed the formula for calculating the parameters for grade four and gave me some good values for Matlab award but when I put on LabVIEW have not settled. formulas are available in PDF and are. Please help me and me someone if possible. Thanks
lim.4 generation parameters in MATLAB program and comparison methods are for second-degree transfer function.
Solved!
Go to Solution.
Attachments:
Pt net.zip ‏2183 KB

This is the VIs what i try to make,but is not work. This pdf. document was used to create last VIs PID. thenk you for your colaboration.
Attachments:
PID create by me.vi ‏312 KB
tut_3782.pdf ‏75 KB

Run-time engine problem in Labview 2009 and Labview 2010

I have a problem with Labview 2009 and Labview 2010. I updated my Labview 2009 into 2010. But it turned out to be a trial one, because i did not have the serial number. So I uninstalled the Labview 2010. however, the funny stuff came over. I cannot use my Labview 2009. So i uninstalled Labview 2009 again. But eventually, I could not reinstall Labview 2009. Every time i had a runtime error and i could not proceed with the installation. in addition, any installation related to Labview is not permitted and the same error came up every time. it is very annoying.
So, What is the deal?
I attached the error here. Any comments or advice are welcomed and appreciated.
Attachments:
error.docx ‏2305 KB

By chance is this machine's language set to any non-English locale? You would check the locale setting by:
Opening Control Panel.
Opening "Regional and Language Options".
Looking Under "Regional Options" >> "Standards and Formats"
If it is set to something besides English, trying setting it to English and please report back what locale it was set to (or if this even solves the problem).
Regards,
- WesW

Error while deploying application using enterprise manager website and dcmctl

Hi,
I am trying to deploy a huge ear file using enterprise manager website of Oracle 9iAs Rel 2.
The deployment fails with the following error.
Deployment failed: Nested exception Root Cause: null; nested exception is: java.lang.OutOfMemoryError. null; nested exception is: java.lang.OutOfMemoryError
We are able to deploy the same ear file using stand-alone container. We are planning for deployment in few days to go it live. Pls suggest what could be the problem.
Hardware Used:-
DellServer Intel P3 dual processor 1.2GHz
1GB RAM
2GB virtual memory,
40GB free hard-drive.
Apart from 9ias enterprise edition, this system has Oracle database also on it. But the database is not being used at all by anyone.
No other software is installed on the system
Software:-
Windows 2000 Server sp2
Oracle 9ias Release 2 Enterprise Edition (Installed J2EE and Webcache)
Oracle 8i Database 8.1.6.0.0
Size of application:-
130 EJBs (107 CMP + remaining Session Beans)
1700 JSPs
3 servlets
Packaged properly into jar,war,ear structure.
the size of ear file is about 13MB.
I tried using dcmctl but still got the following error.
Oracle 8i database is running but noone is using it except that this application uses it.
Pls help
D:\oraJ2EE\dcm\bin>dcmctl deployapplication -f d:\oraJ2ee\j2ee\elink\applications\advecto.ear -
a myapp
ADMN-300075
D:\oraJ2EE\dcm\bin>dcmctl getError -v -d
ADMN-300075
Nested exception
Base Exception:
java.rmi.RemoteException:null; nested exception is:
java.lang.OutOfMemoryError
Nested exception
Root Cause: null; nested exception is:
java.lang.OutOfMemoryError
java.rmi.RemoteException: null; nested exception is:
java.lang.OutOfMemoryError
java.lang.OutOfMemoryError
<<no stack trace available>>
Are there any mandatory patches to be applied after installing 9ias Rel2?
Thanks
Srinath

Try to fragment the 'ear' in less than 64k blocks or don't transmit as long raw.
Please let me know if this works.

Problems loading applications using Blackberry Desktop software

I am using a Blackberry Bold 9000 with OS 5.0.0.681 (Bundle 1137, Platform 5.2.064) and Desktop Software 6.0.0.40 (Bundle 42) on Windows XP. I have about 20 MB of memory available for apps, but I cannot load new applications using Blackberry Desktop software. Now I can remove or unload software with no problem. However, when I attempt to load applications or software that I don't have, the following happens: I can click on the grey cross icon under "Action" to indicate I want the module and status changes to "Pending Install". The apps I want are English UK, Spanish, Supplemental SureType Wordlists for English and Spanish, Blackberry Application Centre, DOD Root Certificates, TTY Support. I then see the following on on the screen: "Update - Uploading Device software -->" "Update - Loading applications -->" "Loading device modules -->" "Loading applications from device - Searching for available device software -->" "Loading applications from device - Read device service information -->" "Loading applications from device - Searching for available device software -->" And lo and behold - the applications are not loaded; they appear as uninstalled in the application list and I can't access them on my Blackberry. During this process the phone does not reboot... previously when changes were made the phone would reboot. My question is, is there a way to force Desktop Manager to load the applications? How can I load the software I want? I have done a wipe and reinstall of apps and OS on my phone; delete and registry clean of my laptop followed by reinstallation of Desktop Software; battery pull and SIM card pull, but to no avail. This is frustrating as I have friends with whom I converse with in Spanish but it isn't my first language so the spell checker is very useful. Any help would be appreciated.

Same problem, after weeks of no problems.
Hard reboot of 8520 several times, reboot desktop, tried different USB ports.
Intellisync crashes on organizer sync and Destop Manager cannot read applications.
Is there a fix?

Using a devices camera and adding the image to the display list

Hi,
My students and I have not been able to make an AIR app that can take a picture using the devices camera and then add the image to the display list. We are able to open the devices camera and of course take a picture, but that's it.
We've been using these two tutorials/examples:
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/media/CameraUI.ht ml
and
http://tv.adobe.com/watch/adc-presents/input-for-mobile-devices-camera/
I've uploaded our project: http://www.dayvid.com/professor/camera.zip
Can someone help us out?
Thanks!
Below is the main document class:
package {
import flash.desktop.NativeApplication;
import flash.display.Loader;
import flash.display.MovieClip;
import flash.display.StageAlign;
import flash.display.StageScaleMode;
import flash.events.ErrorEvent;
import flash.events.Event;
import flash.events.IOErrorEvent;
import flash.events.MediaEvent;
import flash.media.CameraUI;
import flash.media.MediaPromise;
import flash.media.MediaType;
import flash.events.MouseEvent;
     public class Main extends MovieClip{
          private var deviceCameraApp:CameraUI = new CameraUI();
          private var imageLoader:Loader;
          public function Main()
               this.stage.align = StageAlign.TOP_LEFT;
               this.stage.scaleMode = StageScaleMode.NO_SCALE;
                                 camera_btn.addEventListener(MouseEvent.CLICK, cameraBtnClicked);
                      private function cameraBtnClicked(event:MouseEvent):void
                                if( CameraUI.isSupported )
                                                  result_txt.text = "Initializing camera...";
                                                  deviceCameraApp.addEventListener( MediaEvent.COMPLETE, imageCaptured );
                                                  deviceCameraApp.addEventListener( Event.CANCEL, captureCanceled );
                                                  deviceCameraApp.addEventListener( ErrorEvent.ERROR, cameraError );
                                                  deviceCameraApp.launch( MediaType.IMAGE );
               else
                                                  result_txt.text = "Camera interface is not supported.";
          private function imageCaptured( event:MediaEvent ):void
               result_txt.text = "Media captured...";
               var imagePromise:MediaPromise = event.data;
               if( imagePromise.isAsync )
                result_txt.text = "Asynchronous media promise.";
                imageLoader = new Loader();
                imageLoader.contentLoaderInfo.addEventListener( Event.COMPLETE, asyncImageLoaded );
                imageLoader.addEventListener( IOErrorEvent.IO_ERROR, cameraError );
                imageLoader.loadFilePromise( imagePromise );
               else
                result_txt.text = "Synchronous media promise.";
                imageLoader.loadFilePromise( imagePromise );
                showMedia( imageLoader );
          private function captureCanceled( event:Event ):void
               result_txt.text = "Media capture canceled.";
               NativeApplication.nativeApplication.exit();
          private function asyncImageLoaded( event:Event ):void
               result_txt.text = "Media loaded in memory.";
               showMedia( imageLoader );
          private function showMedia( loader:Loader ):void
               this.addChild( loader );
          private function cameraError( error:ErrorEvent ):void
               result_txt.text = "Error:" + error.text;
               NativeApplication.nativeApplication.exit();

Hi,
Do I have to add the picture to the cameraroll in order to add it to the AIR apps display list?
Both examples from Adobe claim that their examples work. Do they not?
In the example, the event handler asyncImageLoaded is never called. The output text field shows -   result_txt.text = "Asynchronous media promise."; So the Event.COMPLETE is being added. But I don't think it's being dispatched.
Any ideas?

Which Listener I should use if I drag and Drop an image/icon into a JPanel?

Dar Friends:
Happy new year.
I try to drag and Drop an image/icon into a JPanel, and hope I can immediately detect it after DND,
Which Listener I should use in this JPanel if I drag and Drop an image/icon into a JPanel??
Thanks

Thank camickr .
I can dnd an image into a JPanel called JPanelOld already, I hope to use another JPanel or JTree to listen to any Dropped Image in JPanelOld later on so I can take some action in another JPanel or JTree.
so what kind of Listener I should use for my purpose??
where to add this Listeners??
Happy New Year.

Deploy an application - Use a different workspace and different schema

Hi,
I have completed my application in my testing server, database, schema, and workspace. And now I would like to deploy my application to the live server with different database, schema and workspace.
I have gone through the Application Express User’s Guide and I have managed to export and import my old app to my new application. However, I failed to import my table from old database schema to my new schema. So, I can’t able to open my new application due to error in executing authorization scheme code.
May I know how do I import my old schema to my new schema and both schema are different name.
Thanks.
Penny

Create a database link in your production environment and use the following script to update the content of the tables from your development:
DECLARE
   v_tab_columns   VARCHAR2 (32000);
   v_db_link       VARCHAR2 (30)    := '@dev';
BEGIN
   /*FOR a IN (SELECT table_name
               FROM user_tables)
   LOOP
      EXECUTE IMMEDIATE 'TRUNCATE TABLE ' || a.table_name || '';
   END LOOP;*/
   FOR c IN (SELECT table_name
               FROM user_tables)
   LOOP
      FOR d IN (SELECT   column_name
                    FROM user_tab_columns
                   WHERE table_name = c.table_name
                ORDER BY column_id)
      LOOP
         v_tab_columns := v_tab_columns || ', ' || d.column_name;
      END LOOP;
      v_tab_columns := LTRIM (v_tab_columns, ',');
      BEGIN
         EXECUTE IMMEDIATE    'INSERT INTO '
                           || c.table_name
                           || ' SELECT '
                           || v_tab_columns
                           || ' FROM '
                           || c.table_name
                           || v_db_link;
         v_tab_columns := NULL;
         DBMS_OUTPUT.put_line ('Updated table ' || c.table_name);
      EXCEPTION
         WHEN OTHERS
         THEN
            v_tab_columns := NULL;
            DBMS_OUTPUT.put_line ('Failed updating table ' || c.table_name);
      END;
   END LOOP;
END;Replace @dev with your database link.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Submitting a form using LC 8.2 and Outlook 2010 32bit

Hello,
I have been searching the posts and have seen issues with attaching pdf's to email using Outlook 2010 64bit, but I am having the same issue with Outlook 2010 32bit. Is there a known issue with attaching the pdf via a submit button using the following code?:
RealEmail.event__click.submit.target = "mailto:" + "[email protected]" + "?subject=For Order #:" + OrdNmbr.rawValue ;
RealEmail.execEvent("click");
Our company recently upgraded to Win 7 pro v6.1 build 7601: sp1 and Office 2010 and ever since, the 20+ forms that I have created, stopped working. When I try to submit any of the forms, it gives me a small "clocking" icon for a second and then nothing happens.
I have tried to use Reader X thinking that it might help, but to no avail. I hope someone out there has a fix, otherwise I have wasted countless hours creating these forms just for them to break with a new system.
Thanks in advance for any insight!

I use Outlook 2010 and do not have issues emailing from inside a PDF. Typically there are two issues that pop up in these situations.
1. Did you Reader Extend the form before distributing it. Reader will not be able to mail the form unless it is Reader enabled. Acrobat does not have that restriction.
2. Virus Scan software can restrict or stop programs from using mail programs (like Outlook) programmatically. Are you running a virus scan program on these machines? Usually there is a panel where you can tell the Virus scan software that Acroabt and Reader are allowed to interact with Outlook 2010.
Hope that helps
Paul

Adding image file name and logo to image

Can you do batch processing of images to automatically insert the image file name, say at the bottom along with a logo, in black font. The logo stays constant but the image deatils will change with each image?
Can this be done in Lightroom or then the full Photoshop?
Thanks!

I've taken the script mentioned above and modified it to the best of my abilities. Still getting the same error, unfortunately:
function main(){
var suffix ="cropped";
var docPath =Folder("~/Desktop");
if(!docPath.exists){
   alert(docPath + " does not exist!\n Please create it!");
   return;
var fileName =activeDocument.name.match(/(.*)\.[^\.]+$/)[1];
var fileExt =activeDocument.name.toLowerCase().match(/[^\.]+$/).toString();
var saveFile = new File(docPath +"/"+fileName+suffix+'.'+fileExt);
switch (fileExt){
   case 'jpeg' : SaveJPEG(saveFile); break;
   default : alert("Unknown filetype please use manual save!"); break;
if(documents.length) main();
function SaveJPEG(saveFile, jpegQuality){
jpgSaveOptions = new JPEGSaveOptions();
jpgSaveOptions.embedColorProfile = true;
jpgSaveOptions.formatOptions = FormatOptions.STANDARDBASELINE;
jpgSaveOptions.matte = MatteType.NONE;
jpgSaveOptions.quality = jpegQuality; //1-12
activeDocument.saveAs(saveFile, jpgSaveOptions, true,Extension.LOWERCASE);

Using LabVIEW 7.1 and LabVIEW 2010 on the same PC (Windows XP)

I have LabVIEW 7.1 on a Windows XP 32-bit PC and we plan to upgrade to LabVIEW 2010 soon. A lot of our software is using Traditional DAQ, DAQmx and DeviceNet. We need to use both versions of LabVIEW for some time on the same PC. Is this possible at all?
I installed an evaluation 2010 version and now I don't have DAQ and DeviceNet in LabVIEW 7.1. Any suggestions will be very helpful.
Thanks, Nick
Solved!
Go to Solution.

For what it is worth, I tried having multiple versions of LabVIEW on the same PC. If you are (very) careful, it is possible to do so, as long as you are only doing development work, i.e. you don't try and install LabVIEW drivers. However, as I've discovered to my great sorrow (which involved installing and removing various versions of LabVIEW on the same machine probably 5-8 times, eventually leading to wiping the machine and installing WinXP all over again, then only one version of LabVIEW), if you want to actually run your code, particularly if it does anything with hardware, you need to stick to one version!
There's another "gotcha" for those of us working with "older" versions (namely before 2009, though one can "trick" 8.6 if you're careful) -- Windows 7 doesn't "play well" with the older software!
So my development machine runs Windows 7. I have a VM of Windows XP in which I installed LabVIEW 7, which I use for my "legacy" work -- I use the Win 7 machine for LabVIEW 8.6, 2009, and 2010 development (and only development, see above).
The machine that got "rebuilt", where I wanted to run LabVIEW code for various hardware and potentially various LabVIEW versions, I did a really nutty thing -- I created a quadruple-boot PC! (It really is a triple-booter, as the Windows 7 system, which is the key step, is "hidden"). To make this work properly, I needed three hard drives in the machine (one for each OS -- I might have figured out how to put two XPs on a single drive, but since I already had the disks, one-OS-per-disk seemed easier). I'm using Windows 7's Boot Loader to give me the startup choice of which system to use (the message says something like "System for Hardware A", "System for Hardware B", "Test System"). True, you need to do a Restart, but since you're going to be collecting data, it's not such a bad idea to start with a "fresh machine".
[I did think about doing this with Virtual Machines, which would have been much simpler, but I didn't have "virtual drivers" for the hardware! One piece was actually a USB device, but the other was a proprietary device that plugged into my PC ...]

TS3297 Hi people! I have no problem downloading new Applications from iTunes using my id & password...however, when I try to update my previous downloaded Applications using the same password and id...a message pops up "cannot connect to iTunes store". He

Please see above Going crazy!!

Have you tried a Hard reset on your Device?
Settings > General > Reset > Reset All Settings

How can we disassociate an Apple ID from a set of computers formated from a single computer using Carbon Copy Cloner and a single image and then Migration Assistant to install their old profile? The original ID is the Apple ID for all the stores.

Here is a bit more detail.
We were replacing old teacher machines and wanted to do it as efficiently as possible. Therefore, we set up one computer, through the OS installation and ran all updates, and then made a disk image so that we can use Carbon Copy Cloner to image all the other computers without having to run all the other updates. Once they were set up to a base level and assigned to a teacher we used Migration Assistant to import all their old files and items. Everything has been fine until recently the computers became aware of needing an update for one or two apps. The machine asks for the original computer's Apple ID for all updates. We have logged out of the apple id and back in with another to test if running the updates will work with that Apple ID and even after a refresh it still asks for the other Apple ID. How can we disassociate the Apple ID from those other computers so that the individual who owns the original is not needed each time there is an update or has to give out their Apple ID password?

There are two parts to this:
1) It may be that you should have an Apple Education Support person helping you with this. If you have enough computers for this to be a problem, you may benefit from a Server, a site license, and an occasional visit from an Education Support Specialist.
2) The brief answer, if you want Individual Apple_IDs to control each computer, is to buy new copies of Mac OS X under those new Apple_IDs and re-download and re-Install. Mac OS X is customized to the Apple_ID before it is downloaded.

Problems distributing application using Imaging Source USBCamera and Labview 2010 - Imaging Source sdk required?!

Similar Messages

Maybe you are looking for