Problems for change the properties for Primitive shapes?

Is there a way to change the properties of Cylinder, Sphere, Cone and Box primitives (com.sun.j3d.utils.geometry.Primitive)?
ie. can you change the radius, height, width, etc after you've already
created this object to the scene?
Thanks for any help!

Hi Anil,
I did modify the property "SLD.selfregistration.hostName" to a fully qualified domain name, (i.e. fgsappitd.fourlis.net), as mentioned in sap note 804124 (performed also the stop and start of applications mentioned in the sap note. However, I still get the error message, whenever I activate my changes in the Integration Directory,
"Unable to notify Adapter Engine 'af.fpd.fgsappitd' that is affected by the data changes
HTTP connection to 'http://fgsappitd:50300/CPACache/invalidate' returns the status code '403' (Forbidden) in response"
It is strange because although I entered the full qualified host name, the error message still shows, in the message above, only the host name.
Just to mention here that when I open an interner browser and run URL 'http://fgsappitd:50300/CPACache/invalidate' it fails. If on the other hand, I open an internet browser an run URL 'http://fgsappitd.fourlis.net:50300/CPACache/invalidate' , it works OK. Therefore, I believe, the problem I get has to do with the missing full qualified host name.
Is there something else I need to do? Do I have to restart the system?
Thanks,
Filippos

Similar Messages

My ipod works in itunes but does not appear in "my computer" after I changed the properties

My ipod works in itunes but does not appear in "my computer" after I changed the properties.
First off, I'm using Windows XP (and Mac SnowLeopard) Here's how it started. For some reason my ipod started showing up as a camera when I plugged it in. It works fine in itunes, though. But when I tried to access it from "my computer" it only
showed me the one and only picture I had on my ipod. I deleted that picture hoping it would no longer show up as a camera. When it still did I right-clicked on it in "my computer" and selected "properties". Under "autoplay" I
chose for it to 'not show up' or 'take no action' or some such deal when I plugged it in. I thought that would stop it from popping up the window that asks whether i want to 'open camera wizard' or 'open camera scanning' or 'open folder to view files' or 'take
no action' , etc. But now it won't show up in "my computer" at all. I also have a Mac with SnowLeopard. When I plugged my ipod into it my ipod doesn't show up in "finder" either! So basically my problem is not a mechanical one with hardware
or software; yht ipod still works fine in itunes. I just need to undo the change I made. I've searched all around my preferences, utilities, options, etc. It shows up on my "Device Manager" but not on "Disk Management".
Any help would be very much appreciated. Thanks.

Hi,
To show up in Windows Explorer, you can try placing the iPod into
disk mode.
Moreover, i recommend you to
restore ipod to factory settings.
If this issue still persists, locate to device manager, uninstall and reinstall USB Mass Storage Device driver.
Here is an article you can refer to below:
http://support.apple.com/kb/TS1369
To get more help, you can also redirect to apple support forum:
http://www.apple.com/support/ipod/
Thanks!
Andy Altmann
TechNet Community Support

Change the properties of a field dynamically using Getter/Setter methods

Thanks
Raj
Edited by: RajICWeb on Aug 12, 2009 4:31 AM

Hi Harshit
Thanks for the reply. Like you suggested, I redefined the get_i_zfield( ) method. But the program is not going through this method.
FYI.....I created the getter/setter methods manually for my zfield. Plz let me know if I am missing anything. Your help will be greatly appreciated.
Below is my requirement:
I need to add an additional column (zfield) to a tree view. The name of the component is BTRESTREE. (there is only one view in this component- this view is having only one context node).
I tried adding my zfield to the attributes (of the context node) through the wizard by right clicking on the 'Attributes'. But I am not getting the 'Create' Option.
I posted a thread few days back regarding the same problem. One of the experts (Vikash Krishna) suggested me to add some my zfield by redefining the 'GET_TABLE_LINE_SAMPLE' method. As per his suggestion, I was finally able to see my zfield in
the configuation tab.
Now, I have to change the properties of my zfield (make this column editable) in the tree view. For that, the only option that I can see is to change the get_i_zfield( ) method (here we have 'rv_disabled') for my zfield. For this, first I need to add my zfield to the Attributes. To achieve this, I added getter/setter methods manually in the Proxy class.
Thanks
Raj

How to change the properties of individulal elements in an array?

Hi all,
I have an array (size is 25) of string and I want to disable and grayout half of them. But how do I do it? How do I change the properties of individual elements in an array? I have tried to use some of the examples given in the discussion forums, but it didint work for the task mentioned above. Anybody would be able to help me with a suitable example that can be specifically used for disable or enable the individual array elements?
Dev

Telemaque wrote:
The user will see the first half of the string elements filled-in and the lower half grayed-out (to be filled in later). Make a test VI, play around.
... except that all elements "greyed out" with this method contain the default string for the array element (blank by default, but changeable). There is no way to have meaningful, unique text in the greyed out elements.
I would suggest to use a listbox as control/indicator. Here elements can easily be disabled programmatically.
LabVIEW Champion . Do more with less code and in less time .

Can we change the properties of the Page in Portal?

Hi,
Is it possible to change the properties of the Page? I want to change the height and width properties of the page, but i dont see the properties in the list. Can you please guide?
Regards
Sai

Hi Sai
You can change the page properties. Right click on portal page > object. it will open the page object properties.
If a page is locked, you can open it in read-only mode. then you need to unlock the page object. refer to [Page Editing|http://help.sap.com/saphelp_nw04/helpdata/en/a3/badf3d48b05d5ae10000000a11405a/content.htm]
Please check the page properties attributes. [Click here |http://help.sap.com/saphelp_nw70/helpdata/en/13/81a66d100011d7b84b00047582c9f7/content.htm]. this properties list is also applicable for the object type iviews/pages.
Hope it will helps
Best Regards
Arun Jaiswal

HT1918 problem with changing the payment information

I've got a problem with changing the payment information !!
when I change them and I followed the instruction , and when I click done
it says " for assistance, contact iTunes support at " the link " . and nothing
change , so what should I do ?

Hi Bart,
The description of the field VBKD-BSTKD will appear in sales order (VA01/02/03) Header Order data tab.
If you notice the text for below one it is PO Number where Number starts with upper-case N and it iis not the one which you changed.
Also this is a hyperlink to sales header order data screen.
You need to enhance the code via sales exit to fix this.

How to change the properties of waveform graph from time domain to frequency domain?

Actually, I want my output waveform graph give me the answer in x-component in frequency instead of time after the FFT. My output waveform graph gives the x-components in time instead of frequency. How to change the properties of the waveform graph?

vasus wrote:
Hi,
I amtaking sensor input signals through NI FPGA cRIO-9004. i am analysing this using wave graph. the problem is i am not getting accurate singal.How to decrease the frequency?
You are responding to a very old (8 years) thread, be aware that that might not be the best option.
However, you want to decrease the frequency? or increase?
What is the code you are running?
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

How to change the properties of a directory using java code

Hai All,
I need to change the properties of directory( websharing).
Can i do this using java code.
Regards,
Charan

I need to change the properties of
directory( websharing).
an i do this using java code.Depends on whether the server has a Java API to do it. Most likely it hasn't.

Unsuccessful to change the properties label

Hi expert,
i am doing to change the properties label. i used existing project that i download from sap note 817876. below is my steps:
1. i create my bundle file (fgckbLabel.properties)
2. in bundle file, i defined my properties as
          HRProgram=Program
          HRDate=Date
3. i change KEY in IRFServiceWrapper.java
    it become com.fgckbLabel.km.resource.bundle
4. i deploy to portal
5. i restart servlet engine
6. i create metadata extension in system administration > system configuration > knowledge management > content management > global services > metadata extension.
name : fgckbLabel_metadata_extension
bundle file : com.fgckbLabel.km.resource.bundle.fgckbLabel
7. i assign the metadata extension to all properties that need to change the label.
i do the above steps in many times but i cant see any changes on my properties. it's still display the property ID. did i missing some step?
please help me..
Thank in advance,
Faeza

Hi Faeza,
The steps you have followed seems to be correct. This issue used to happen in our environment also, but second j2ee restarts used to fix the issue.
Few cross checks which you can perform
Please download the par file from the server and check whether the changes are present in the par file.
make sure that you have keyed in the right bundle file name.
Help link,am sure you would have seen this.
http://help.sap.com/saphelp_nw04/helpdata/en/65/6fc63ed4027f6be10000000a114084/frameset.htm
Regards,
Vinod

How do I change the properties of all my highlight boxes at the same time?

How do I change the properties of all my highlight boxes at the same time?

Hello,
Which version of Captivate do you use, please?
Lilybiri

Problem when changing the target quantity for a contract

Hello,
I have a problem when i try to change the target quantity for a contract through the BAPI 'BAPI_CONTRACT_CHANGE'.
I filled the tables 'item' and 'itemx' with new values. the BAPI 'BAPI_CONTRACT_CHANGE' returns no error, but after using the BAPI 'BAPI_TRANSACTION_COMMIT' I get an info message from SAP and the modification does not pass.
In debugger I could locate the error. In fact, the appeal of FM 'ME_UPDATE_DOCUMENT is done with a table XEKKN with the new values of the quantity and a KZ code equal to ' I ' to insert, then it must have the value ' U 'for update .
Is someone can help me to solve this problem?
Thank you in advance.

Have you tried selecting the page, and then changing the theme directly on that page?

Facing problem while changing the database at runtime

hi everyone,
Before posting this thread, i have gone through the various posts addressing the problem....but still iam unable to get the solution for this problem.
The report has been generated in one system, so the database properties (connection string....) are hardcoded in the report file...
Now when iam trying to change the database, it is still connecting to the system where the report file was created.
I have tried the changeDatasource() method, but it didnot worked....
here is the code for changeDatasource() method
public static void changeDataSource(ReportClientDocument clientDoc,
 String reportName, String tableName,
 String username, String password, String connectionURL,
 String driverName,String jndiName) throws ReportSDKException {
 PropertyBag propertyBag = null;
 IConnectionInfo connectionInfo = null;
 ITable origTable = null;
 ITable newTable = null;
 // Declare variables to hold ConnectionInfo values.
 // Below is the list of values required to switch to use a JDBC/JNDI
 // connection
 String TRUSTED_CONNECTION = "false";
 String SERVER_TYPE = "JDBC (JNDI)";
 String USE_JDBC = "true";
 String DATABASE_DLL = "crdb_jdbc.dll";
 String JNDI_DATASOURCE_NAME = jndiName;
 String CONNECTION_URL = connectionURL;
 String DATABASE_CLASS_NAME = driverName;
 // The next few parameters are optional parameters which you may want to
 // uncomment
 // You may wish to adjust the arguments of the method to pass these
 // values in if necessary
 // String TABLE_NAME_QUALIFIER = "new_table_name";
 // String SERVER_NAME = "new_server_name";
 // String CONNECTION_STRING = "new_connection_string";
 // String DATABASE_NAME = "new_database_name";
 // String URI = "new_URI";
 // Declare variables to hold database User Name and Password values
 String DB_USER_NAME = username;
 String DB_PASSWORD = password;
 System.out.println("DB_USER_NAME......."+DB_USER_NAME);
 System.out.println("DB_PASSWORD......."+DB_USER_NAME);
 // Obtain collection of tables from this database controller
 if (reportName == null || reportName.equals("")) {
 Tables tables = clientDoc.getDatabaseController().getDatabase().getTables();
 System.out.println("Tables in reports........"+tables.size());
 for(int i = 0;i < tables.size();i++){
 origTable = tables.getTable(i);
 System.out.println("origTable........"+origTable.getQualifiedName());
 if (tableName == null || origTable.getName().equals(tableName)) {
 newTable = (ITable)origTable.clone(true);
 // We set the Fully qualified name to the Table Alias to keep the
 // method generic
 // This workflow may not work in all scenarios and should likely be
 // customized to work
 // in the developer's specific situation. The end result of this
 // statement will be to strip
 // the existing table of it's db specific identifiers. For example
 // Xtreme.dbo.Customer becomes just Customer
 newTable.setQualifiedName(origTable.getQualifiedName());
 System.out.println("newTable........"+newTable.getQualifiedName());
 // Change properties that are different from the original datasource
 // For example, if the table name has changed you will be required
 // to change it during this routine
 // table.setQualifiedName(TABLE_NAME_QUALIFIER);
 // Change connection information properties
 connectionInfo = newTable.getConnectionInfo();
 // Set new table connection property attributes
 propertyBag = new PropertyBag();
 // Overwrite any existing properties with updated values
 //propertyBag.put("Trusted_Connection", TRUSTED_CONNECTION);
 //propertyBag.put("Server Type", SERVER_TYPE);
 propertyBag.put("Use JDBC", USE_JDBC);
 propertyBag.put("Database DLL",DATABASE_DLL );
 propertyBag.put("JNDI Datasource Name",JNDI_DATASOURCE_NAME );
 propertyBag.put("Connection URL", CONNECTION_URL);
 propertyBag.put("Database Class Name", DATABASE_CLASS_NAME);
 //propertyBag.put("Server Name", SERVER_NAME); //Optional property
 // propertyBag.put("Connection String", CONNECTION_STRING); //Optional property
 // propertyBag.put("URI", URI); //Optional property
 connectionInfo.setAttributes(propertyBag);
 // Set database username and password
 // NOTE: Even if the username and password properties do not change
 // when switching databases, the
 // database password is *not* saved in the report and must be set at
 // runtime if the database is secured.
 connectionInfo.setKind(ConnectionInfoKind.SQL);
 connectionInfo.setUserName(DB_USER_NAME);
 connectionInfo.setPassword(DB_PASSWORD);
 // Update the table information
 clientDoc.getDatabaseController().setTableLocation(origTable,newTable);
Also i tried with replaceConnection() method...........it displayed the report, but with not column names and data
need help regarding.......
Edited by: abhishek.c1984 on Jun 25, 2009 10:02 AM

In the report i have two tables.............so before changing the database properties for each table iam printing their names.
The names are dispalyed correctly.......but once i set the table location...i.e through the following method..
clientDoc.getDatabaseController().setTableLocation(tables.getTable(i),newTable);
every time i can see only one table i.e. properties are set for the first table ........and each time the properties are being set for the first table only.....i dont no what is happening to the rest of the tables..
I have posted the method in the above post.....can any one please trace out the problem
Note: when i comment the following code, i can see all the tables
clientDoc.getDatabaseController().setTableLocation(tables.getTable(i),newTable);
when i uncomment it, i can see only first table repeating every time...
Edited by: abhishek.c1984 on Jun 25, 2009 1:03 PM

How can we change the properties of a seeded item in OAF !!!

Hi All Gurus!
I have a seeded item (Button 'Apply') on an Add attachement page provided by Oracle in Self Service Web Module. Oracle documentation says this:
If you want changes to the Attachments table or page to commit automatically, without requiring a user to select Apply in the base page, you can turn on "auto-commit" by setting the Automatic Save property to True for the attachmentLink, attachmentTable, or attachmentImage item.With "auto-commit" turned on, each action ("Add", "Update", "Detach") performed by the user in the Attachments table or page is automatically committed.
Q1) How we can see the properties of the seeded items?
Q2) How we can turn on the personalization pencil button of an item that is disabled by Oracle development team?
Please let me know how we can achieve this through self-service personalization. Any light on this.
Thanks in advance!
John
Message was edited by:
jtom

You donot need to do anything on the Add Attachment page. The autoCommit feature is exposed as a property on the Attachment bean. You need to extend the controller in the base page where the attachment Image, Link is present and get a handle to the attachmentBean and call setAutoCommit(true) which will enable automatic saving.Use personalizations to modify the controller class property on the base page. You can later choose to remove the Save button on base page using personalization.

How does one change XY Graph Plot.Style property defaults OR Change the Properties od Individual Plots?

I have an XY graph with a variable (known) number of multiple plots. Because the number of plots can vary, the plot style is sometimes not what I want. I'm trying to use a property node in a for-loop to change the Plot.LineStyle, Plot.PointStyle, and Plot.Fill/PtColor properties for each of the plots in an XY graph. However, perhaps because the names are not static, the colors do not seem to be updating as I'd like, and I'm really unsure as to why this is happening. Strangely, the LineStyle and PointStyle do seem to be updating as I'd like.
Please see the attached ScatterColors.zip file which contains the main VI in question (SplitInGroupsScatterByOrder.vi) and two sub-VIs on which it depends. Thanks in advance for your help
Solved!
Go to Solution.
Attachments:
ScatterColors.zip.zip ‏32 KB

Hello Pierre,
This dynamic color feature is still not present in 2009, much less 6.1. I have linked a discussion forum post here that discusses in detail a work around for addiing this functionality. While you may not be able to open their example VIs, the theory is described; such that, you may attempt to replicate in 6.1.
Hope this helps.
Patrick Corcoran
Application Engineering Specialist | Control
National Instruments

Problem in Changing the Service Order Using BAPI_ALM_ORDER_MAINTAIN

Hi ABAPers,
I want to change the Service order(TCODE-IW32) Using BAPI_ALM_ORDER_MAINTAIN.But i don't know what are all the
Parameters needs to be passed.I want to chnage the COMPONENT of the Service Order.Please anyone tell me what all are the
mandatory parameters should be passed to change the COMPONENT of the Service Order.If anyone has the code Please send me.
It is very Urgent Kindly help me to Solve this problem.
Regards,
Ashok.

Hi Ashok,
i am sending u the sample eg thread for bapi create i thnk u can find out the mandatory fields frm tht ...
check this link though it is for create the mandatory fields and structure will be same .
Create Order BAPI
regards
Sana M.
reward for useful answers..

Problems for change the properties for Primitive shapes?

Similar Messages

Maybe you are looking for