Problems in creation of a new user in the workflow

Hello everybody,
I created a task "create new user" in the workflow. When I chose the "password" attribute, the entry couldn't be created. Without that attribute, I am able to create a user and see him in the monitoring, but can't log into the workflow because of a password error. Could anybody tell me what went wrong here? Did I forget a setting?
Thank you in advance...

Hi All,
We suddenly started getting this error:
Access denied.
You may not have access to perform this task on the chosen person
or your session has timed out. (Try to log into the system again.)
As told above we already have extension=php_mcrypt.dll enabled in php.ini file like this.
; Local Variables:
; tab-width: 4
; End:
[PHP_LDAP]
extension=php_ldap.dll
[PHP_MCRYPT]
extension=php_mcrypt.dll
[PHP_MSSQL]
extension=php_mssql.dll
[PHP_XSL]
extension=php_xsl.dll
We are also having file libmcrypt.dll in the php.ini folder.
This error is only coming for one queue when we try open a transaction and not any other queue. we are having same access to all the queues. this is only happening from today and till yesterday we never had this issue.

Similar Messages

Problem with the creation of a new user

Hi!
II want to create new user in the database but i have this message: this entry already exists in the following tables (CUMI).
This user doesn't exists and we haven't deleted users.
When I am going to see in the table OUSR I have 19 users
But when I am going to see the table CUMI, it recognises an user code 20!
when I use the orange arrow near the user code 20, nothing happens.
SAP 2005 A PL 46
How can i do?
Thank you
Séverine

Hai!
Raise a message in sap support portal.
Regards,
Thanga Raj.K

Error: Creation of a new user in CUP

Dear all,
During the creation of a new user in CUP, is generated the following error message:
Error in the provisioning request. The error occurred in the system(s). Details of error: USER CREATE-Length password is not enough (minimum length: 8 characters).
Thanks all for any suggestions!
Liliana!

Hi,
Thanks for your answers!
My version is SAP GRC AC 5.3 and Support Package: 16.
This is the complete error when I try to create a new user in CUP:
iniu2011-07-04 07:59:19,520 [SAPEngine_Application_Thread[impl:3]_8] ERROR com.virsa.ae.service.ServiceException: Longitud clave acceso insuficiente (     )
com.virsa.ae.service.ServiceException: Longitud clave acceso insuficiente (longitud mínima: 8 caracteres)
     at com.virsa.ae.service.sap.SAPProvisionDAO.createUser(SAPProvisionDAO.java:324)
     at com.virsa.ae.service.sap.ProvisionSAPUserDAO.createUserInNonCUA(ProvisionSAPUserDAO.java:1784)
     at com.virsa.ae.service.sap.ProvisionSAPUserDAO.createUser(ProvisionSAPUserDAO.java:352)
     at com.virsa.ae.service.sap.ProvisionSAPUserDAO.provisionUser(ProvisionSAPUserDAO.java:120)
     at com.virsa.ae.accessrequests.bo.ProvisioningBO.autoProvision(ProvisioningBO.java:219)
     at com.virsa.ae.accessrequests.bo.RequestBO.autoProvisioningForApprove(RequestBO.java:6164)
     at com.virsa.ae.accessrequests.bo.RequestBO.callAEExitService(RequestBO.java:7263)
     at com.virsa.ae.accessrequests.bo.RequestBO.callExitService(RequestBO.java:7037)
     at com.virsa.ae.accessrequests.bo.RequestBO.approveRequest(RequestBO.java:6889)
     at com.virsa.ae.accessrequests.bo.RequestBO.approveRequest(RequestBO.java:6682)
     at com.virsa.ae.accessrequests.actions.RequestViewAction.confirmRequestApproval(RequestViewAction.java:1022)
     at com.virsa.ae.accessrequests.actions.RequestViewAction.execute(RequestViewAction.java:106)
     at com.virsa.ae.commons.utils.framework.NavigationEngine.execute(NavigationEngine.java:295)
     at com.virsa.ae.commons.utils.framework.servlet.AEFrameworkServlet.service(AEFrameworkServlet.java:431)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
     at com.virsa.ae.commons.utils.framework.servlet.AEFrameworkServlet.service(AEFrameworkServlet.java:461)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
     at com.virsa.ae.commons.utils.framework.servlet.AEFrameworkServlet.service(AEFrameworkServlet.java:461)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:219)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Thanks all for any suggestions!
Liliana!

I can use my appleID without any problems for using to download new apps in the app-store or Itunes - Problem: I can´t use my ID at facetime and Imessage - I´d like to add an EMail account on top to my mobile number. My password will not be accepted!!!???

I can use my appleID without any problems for using to download new apps in the app-store or Itunes - Problem: I can´t use my ID at facetime and Imessage -
I´d like to add an EMail account on top to my mobile number to use more this services. My password will not be accepted!!!??? I try it and i try it and i try ist, throughout the same problem. Whats on? The user help desk said, i´ve to reset and use the WLAN key new as well as possible - no way!

Contact the App store for Apple ID help. Their support link is on the right of the App store window
LN

I Can Add a new user, But the new user cannot logg in how can I solve this?

Hi there. When I add a new user every thing works great except when I try to logg this new user. The computer freezers at the logging window with the processing bar working indefinetly. To fix it I have to AppleCtrlpower swich to get out and restrat the computer. I can only logg in as the administrator... Can any one help me and point me to a right solution. Thank you!

Javivi:
Welcome to Apple Discussions.
It is difficult to tell why your new user account is not working, but one has to start some place.
First try Starting up in Safe Mode. Log in with the original user account, the restart the computer normally and log into the original user account. Go to Applications > Utilities > Disk Utility. Launch Disk Utility. Select your HDD (manufacturer ID) in the left panel and First Aid in the main panel. Click Repair Disk Permissions. Quit DU.
Go to System Prefs > Accounts and recheck the new account, especially the login options. If everything seems OK quit System Preferences and restart. Try logging into the new accounts. If you have problems force shut down and Start up in Safe Mode again.
It may be easiest to just delete the new account and start over, as you do not yet have any data in it. However, if you want to continue to trouble shoot we can try it for a while.
Please post back with a report of your experience and any questions or comments you may have.
Good luck.
cornelius

How do I add another Iphone to my laptop?? I have creadted a new user for the other Iphone however it wont let me sync to the new user??? HELP

How do I add another Iphone to my laptop?? I have creadted a new user for the other Iphone however it wont let me sync to the new user??? PLEASE HELP

Never mind, disregard. I went in and reset my password to my AirPort Express, and for some reason, it then went through, and is all working and good.

If I load a video on a nano to give out at a business conference can recipients see the video when they open the device? Iwas told it will wipe when a new user opens the device.

If I load a video on a nano to give out at a business conference can recipients see the video when they open the device? I was told it will wipe when a new user opens the device.

No, it will wipe it when they try to connect it to a computer and set it up under their own Apple ID. When they turn on the device the first time without connecting it to anything they will be able to see the video.

Test Links for Users OUTSIDE the Workflow

Hello,
In our company we have a process where updates are requested, then someone makes the updates and then a test link is sent to the requestor so they can review and approve. This is all pre-UCM, we have been working in another CMS and are moving to UCM now. The question that has arisen is how can users that are NOT in the workflow or dont even have users accounts view the content on the server?
Basically when we send test links to the requestor they often send to their coworkers etc... for further review and from what we are being told about workflows is that ONLY the users IN the workflow can see the updates on the site in the browser.
Is there a "work a round" to this? How can we allow anyone to see updated content on our test site?
Could we create a Generic Guest account that has read to all content and is in all workflows? What have you experenced in your implementations and how have you resolved?
Thank you
Brett.

WOW, no one has run into this type of situation. Amazing. well then... hmmmm.....

Send Welcome Email to New User using the Scripting Agent

Hi
I require some assistance please. I have found a number of scripts online to send a Welcome Email to new users whereby they make use of the ScriptingAgent.xml file.
I like the way the scripts have been configured and have mashed up one or two scripts together for my desired result however when testing in my lab (Exchange 2013) I have found tow problems.
The problems are:
1. When creating a new user and mailbox (New-Mailbox) via the ECP the script throws out an error which I will post later in this post. The mailbox is created fine but it does not send out a welcome email. When a user is created in ADUC and then a mailbox
is created (Enable-Mailbox) the welcome email is sent out correctly.
2. In the script i have a section to check for NewUser00 in the HTML file and replace that with the Users Name and Surname, however this does not work correctly, I just come up blank:
The Script:
<?xml version="1.0" encoding="utf-8" ?>
<Configuration version="1.0">
<Feature Name="WelcomeEmail" Cmdlets="New-Mailbox,Enable-Mailbox">
<ApiCall Name="OnComplete">
if($succeeded) {
# Waiting for synchronization after mailbox has been created.
Set-ADServerSettings -ViewEntireForest $true
Start-Sleep -s 10
# New-Mailbox triggered. Taking SamAccountName parameter.
if ($provisioningHandler.UserSpecifiedParameters.Contains("SamAccountName") -eq $true) {
$UsrSamAccountName = $provisioningHandler.UserSpecifiedParameters["SamAccountName"]
$USRdfirst = $provisioningHandler.UserSpecifiedParameters["FirstName"]
$USRdlast = $provisioningHandler.UserSpecifiedParameters["LastName"]
$UsrAlias = (Get-Mailbox -Filter {SamAccountName -eq $UsrSamAccountName}).Alias.ToString()
$USRdname = $USRdfirst + " " + $USRdlast
# Enable-Mailbox triggered. Taking Identity parameter, this is the only one avalaible in this case.
if ($provisioningHandler.UserSpecifiedParameters.Contains("Identity") -eq $true) {
$UsrIdentity = $provisioningHandler.UserSpecifiedParameters["Identity"].ToString()
$USRdfirst=$provisioningHandler.UserSpecifiedParameters["FirstName"]
$USRdlast=$provisioningHandler.UserSpecifiedParameters["LastName"]
$UsrAlias = (Get-Mailbox -Identity $UsrIdentity).Alias.ToString()
$USRdname= $USRdfirst + " " + $USRdlast
# Defining variables.
$UsrAddr = (Get-Mailbox -Filter {Alias -eq $UsrAlias}).PrimarySmtpAddress.ToString()
$UsrOU = (Get-Mailbox -Filter {Alias -eq $UsrAlias}).OrganizationalUnit
# Sending email notification to the user in specific OU.
if ($UsrOU -match "Contoso.com") {
# HR #
$fromHR="[email protected]"
$SubjectHR="'Welcome to Contoso'"
$BodyHR = [string] (get-content ("c:\welcome\WelcomeMSG.htm"))
$BodyHR = $BodyHR -replace "NewUser00",$USRdname
$fileHR = "c:\welcome\WelcomeMSG.htm"
$smtp="192.168.x.x"
Send-MailMessage -From $fromHR -To $UsrAddr -Subject $SubjectHR -Body $BodyHR -BodyAsHtml -Encoding ([System.Text.Encoding]::UTF8) -SmtpServer $Smtp
# Clearing variables. Each one in its own line in order to prevent error messages from being shown on EMC.
if ($UsrAlias) { Remove-Variable UsrAlias }
if ($UsrAddr) { Remove-Variable UsrAddr }
if ($UsrOU) { Remove-Variable UsrOU }
if ($UsrMsg) { Remove-Variable UsrMsg }
if ($UsrIdentity) { Remove-Variable UsrIdentity }
if ($UsrSamAccountName) { Remove-Variable UsrSamAccountName }
</ApiCall>
</Feature>
</Configuration>
The Error for issue 1:
The cmdlet extension agent with the index 5 has thrown an exception in OnComplete().
The exception is: Microsoft.Exchange.Provisioning.ProvisioningException: ScriptingAgent:
Exception thrown while invoking scriptlet for OnComplete API: You cannot call a method on a
null-valued expression.. ---> System.Management.Automation.RuntimeException:
You cannot call a method on a null-valued expression. at CallSite.Target(Closure , CallSite , Object ) at
System.Dynamic.UpdateDelegates.UpdateAndExecute1[T0,TRet](CallSite site, T0 arg0) at
System.Management.Automation.Interpreter.DynamicInstruction`2.Run(InterpretedFrame frame) at
System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame)
--- End of inner exception stack trace --- at Microsoft.Exchange.ProvisioningAgent.ScriptingAgentHandler.OnComplete(Boolean succeeded, Exception e)
at Microsoft.Exchange.Provisioning.ProvisioningLayer.OnCompleteImpl(Task task, Boolean succeeded, Exception exception)
Any assistance in resolving these two issues will be really appreciated

Ok I am gonna to answer my own question.
I have persevered through the day and have resolved my two issues. I hope this assist others within the community.
Script:
<?xml version="1.0" encoding="utf-8" ?>
<Configuration version="1.0">
<Feature Name="WelcomeEmail" Cmdlets="New-Mailbox,Enable-Mailbox">
<ApiCall Name="OnComplete">
if($succeeded) {
# Waiting for synchronization after mailbox has been created.
Start-Sleep -s 30
Set-ADServerSettings -ViewEntireForest $true
# New-Mailbox triggered. Taking SamAccountName parameter.
if ($provisioningHandler.UserSpecifiedParameters.Contains("Name") -eq $true) {
$UsrSamAccountName = $provisioningHandler.UserSpecifiedParameters["Name"]
$Usrname = (Get-Mailbox -identity $UsrSamAccountName | Select Name | foreach { $_.Name})
$UsrString = $Usrname | Out-String
$UsrAlias = (Get-Mailbox -Filter {Name -eq $UsrSamAccountName}).Alias.ToString()
# Enable-Mailbox triggered. Taking Identity parameter, this is the only one avalaible in this case.
if ($provisioningHandler.UserSpecifiedParameters.Contains("Identity") -eq $true) {
$UsrIdentity = $provisioningHandler.UserSpecifiedParameters["Identity"].ToString()
$Usrname = (Get-Mailbox -identity $UsrIdentity | Select Name | foreach { $_.Name})
$UsrString = $Usrname | Out-String
$UsrAlias = (Get-Mailbox -Identity $UsrIdentity).Alias.ToString()
# Defining variables.
$UsrAddr = (Get-Mailbox -Filter {Alias -eq $UsrAlias}).PrimarySmtpAddress.ToString()
$UsrOU = (Get-Mailbox -Filter {Alias -eq $UsrAlias}).OrganizationalUnit
# Sending email notification to the user in specific OU.
if ($UsrOU -match "contoso.com") {
# HR #
$fromHR="[email protected]"
$SubjectHR="'Welcome to CONTOSO'"
$BodyHR = [string] (get-content ("c:\welcome\WelcomeMSG.htm"))
$BodyHR = $BodyHR -replace "NewUser00",$UsrString
$fileHR = "c:\welcome\WelcomeMSG.htm"
$smtp="x.x.x.x"
Send-MailMessage -From $fromHR -To $UsrAddr -Subject $SubjectHR -Body $BodyHR -BodyAsHtml -Encoding ([System.Text.Encoding]::UTF8) -SmtpServer $Smtp
# Clearing variables. Each one in its own line in order to prevent error messages from being shown on EMC.
if ($UsrAlias) { Remove-Variable UsrAlias }
if ($UsrAddr) { Remove-Variable UsrAddr }
if ($UsrOU) { Remove-Variable UsrOU }
if ($UsrMsg) { Remove-Variable UsrMsg }
if ($UsrIdentity) { Remove-Variable UsrIdentity }
if ($UsrSamAccountName) { Remove-Variable UsrSamAccountName }
</ApiCall>
</Feature>
</Configuration>

Custom workflow... creating a new user from the End User's point of view

Hello I am trying to design a new Request for the end user so that they are able to create a new user. I am having problems with my workflow at this point and keep getting the error "Missing view id." Below is my code please help me out... I am very new to this so be gentle.
P.S. All my fields are named with " view.waveset.* " where * is either accountId or firstname or any attribute I need to set
<Extension>
<WFProcess name='End User Create New User' maxSteps='0'>
<Activity id='0' name='start'>
<Transition to='Create View'/>
<WorkflowEditor x='33' y='5'/>
</Activity>
<Activity id='1' name='Create View'>
<Action id='0' application='com.waveset.session.WorkflowServices'>
<Argument name='op' value='createView'/>
<Argument name='id' value='$(accountId)'/>
<Argument name='type' value='User'/>
</Action>
<Transition to='Update View'/>
<WorkflowEditor x='107' y='81'/>
</Activity>
<Activity name='Update View'>
<Action process='Update View'>
<Argument name='type' value='User'/>
<Argument name='id' value='$(accountId)'/>
<Argument name='options'>
<map/>
</Argument>
</Action>
<Transition to='Provision'/>
</Activity>
<Activity id='2' name='Provision'>
<Action id='0' application='com.waveset.provision.WorkflowServices'>
<Argument name='op' value='provision'/>
<Argument name='user' value='$(view)'/>
<Argument name='options'>
<map/>
</Argument>
</Action>
<Transition to='end'/>
<WorkflowEditor x='296' y='83'/>
</Activity>
<Activity id='3' name='end'>
<WorkflowEditor x='393' y='5'/>
</Activity>
</WFProcess>
</Extension>

I ran across the same error today. Since it's been over a month, I assume you've fixed it already or decided you didn't need it at all? What was your fix?
For me, I noted that in the sample directory, a similar "createView" call (in End User Anonymous Enrollment) also includes this argument:
<Argument name='viewId' value='User'/>
When I added that to my createView call, the "Missing view id" error went away, and the user are gets created.
I'm not entirely comfortable with the value specified, though; seems like view IDs should be more unique. I would have thought it should have been something like this instead:
<Argument name='viewId' value='User:$(accountId)'/>

New user, on the road, stumped.

My wife and I are on vacation with our N95s and tired of repeatedly carpet-bombing friends and family with MMS pictures as our vacation progressed. I tricked my wife into installing Ovi Share and she and I notified everyone that we would no longer send MMS, but would SHARE our travels on OVI. As our trip progressed a lot of questions have come up. I am not too confident that posting here will get the answers I seek and I apologize if this is the wrong place to ask questions. We both downloaded the latest Ovi share app. 1. Is there some cool guide to ovi share? Something to answer questions such as: What exactly is ovi share, why would I use it, why do I care, what need would it meet and what solutions does it replace. I know a Nokia site offers video, but I am running on EDGE and lack the patience for a video download which may not play on my N95. 2. Is ovi share what I should be using to replace sending MMS messages throughout my trip? Is it for something else? 3. Not having 3G in the USA (which is either my fault, T-mobile's fault or Nokia's fault, depending on who I ask), I am forced to use EDGE. Many of these pictures/videos take a LONG time to upload to mymedia and it won't let me send another until the current send completes. Is there a way to allow it to stack up stuff in the outbox like every other messaging application? 4. Many of the transfers abort and it is unclear what was sent. Updating the share app often does not show the latest upload like the web page and I have sent the same files twice many times. How can I keep the mobile app in sync? How can I delete duplicates from the mobile app, or am I forced repeatedly to log in to that web site over EDGE? 5. I am not convinced that others actually can see my photos. Are they really shared? The mobile web site is unclear on this. I added a "shared" album but can't seem to get any photos into it. Why aren't they just shared? I managed to trick the contacts doohicky into making my wife a contact, but I can't see her photos on the web from my phone. I don't think she can see my photos either. 6. Reading the forums makes me think I need a Windows PC to get anything done. Is this true? I don't have one at home (we run Solaris) and I certainly didn't bring one on the trip. After all, the N95 is the "multimedia computer." Do I REALLY need a Windows box to do this stuff? . 7. The share app has an option called "My contact's media." Who is my contact and what is their media? My wife is a contact on my phone and even a contact on the ovi share site, but this is always blank. What is it? 8. The share app has a setting called "Publish all image data." The help topic says this will "automatically publish all image data." I have this enabled yet I still have several thousand images which were not automatically published. What does this do? 9. My contacts now have a field called "Share view." Is this related to Ovi Share? What does it do? How do I use it? Phew. Thanks for reading and any answers to any questions are deeply appreciated. Sincerely, Marty Posted from Opera Mini on N95 using a Stowaway keyboard in the French Quarter

In your main account, create a new folder on the desktop and move some of your account's files to it. Keep track of what you move, and move files back and forth in batches until you've isolated the file responsible for the problem.
If the problem's in the account's system-level records and not a file in its home folder, migrating everything won't transfer the problem.
(116288)

Can I transfer CC for Teams membership (Photoshop) to a new user on the same machine without uninstalling and reinstalling software? i.e. one user left new user started needing the same software.

We have Creative Cloud for Teams, most users using Photoshop. One user left the company and has been replaced by another user. I removed the first user's membership and assigend it to the new user. When she runs Photoshop, she gets a 00 Days left message. Photoshop still seems to be useable right now but I'm wondering if I need to uninstall Photoshop and re-install it using her credentials? Seems like a lto of unnecessary work to me.

Hi Batterry,
There is no need for removal of the product . You can simply launch the product , click on Help>Sign out . Close the product and sign in with the new user's Adobe ID & Password. This should activate the product .
Cheers,
Kartikay Sharma

Windows SBS 2011 - I can't add a new user through the SBS Console

I have recently installed SBS 2011 and this is my first install of SBS since 2003.
After the installation I went to the SBS Console to add a new user and when I select 'Add a new user account' and base it on the Standard User account i get a message saying 'Add a New User Account failed', when i view the details for this it says "The User
Account cannot be added. Ensure that the Active Directory Domain Services service is running....
I searched the web for this and found the following which was not applicable http://support.microsoft.com/kb/958890
I then resorted to adding the users via AD Users and Computers and the modifying the value in the ADSI for msSBSCreationState to 'Created' and then it appeared in the console, i then used the console to change the user role for this account to Standard User.
But when i now click on the "Edit User Account Properties" action i get a pop up message from SBS Server saying "There is no such object on the server".
Any ideas on ow to fix this broken console would be appreciated.
Thanks,
Simon

Hi, using default names i AD will help. For everyone who lost original. grr...
http://i.techrepublic.com.com/blogs/february-2011-wstips-tip1-figa.jpg?tag=content;siu-container

Everyone can create/remove a new user in the Weblogic Realm

Hi,
I just find any one can use Weblogic object create new/delete user in
the Weblogic realm.
// create
RealmManager rm =
Admin.getActiveDomain().getSecurity().getRealm().manager();
User user = rm.getUser(userName);
if (user == null)
user = rm.createUser(userName, password);
// delete
RealmManager rm =
Admin.getActiveDomain().getSecurity().getRealm().manager();
User user = rm.getUser(userName);
if (user != null)
rm.removeUser(user);
Looks like Weblogic has a security hole here? Shouldn't these object
only invokable to users belong to Administrators group?
Any comments? or there is known fix?
Simon Song

How long does an email invite take for CC teams? I have tried to add a new user but the amil was never recived.

It seems my new user isn't getting the invitation to my team. I've tried having the user create an adobe account and tried having him just log in to the CC app. but it want to be in "trial" mode. Not sure what to do next. Any ideas?

Hi There,
Kindly ask the user to check the Junk Email and spam folders.
This is what you can try.
Send invitation to a different user so that you can test if the email account that you are inviting is faulty or not.
If you are getting the same response from another user as well, kindly contact Adobe Support via: Contact Customer Care
Thanks,
Atul Saini

Problems in creation of a new user in the workflow

Similar Messages

Maybe you are looking for