Problems in editing To Do on E75 after being syncr...

After I add a todo to my phone i can change the time as long as i don't synchronize it. but once i synchronise it with MS Outlook 2007, any changes i made to time it says "Alarm set for later than entry starts" then i can't even move the cursor from the Time field. the Nokia PC Suite i use is 7.1.30.9 and i use Windos Vista with MS Outlook 2007. i have set the syncronisation for the computer to overide if there is a conflict. Now i have to add a new todo whenever i want to change the time, or i just have to access the computer to do so!!! any suggestions of how to make it disappear?

I have the same problem and an additional one....do any of you face this as well ?
I sync my Outlook Calendar & Tasks (To-Do List) to the phone. If there is a to-do reminder in Outlook that I DO NOT MARK COMPLETE on the Due Date and leave it as it is (without Snoozing it or setting a new due date), and then the phone syncs with Outlook - the NOT COMPLETED to-do pops up EXACTLY AT MIDNIGHT EVERY NIGHT on the phone until I mark it complete in Outlook !!!!
E75-1, RM412, V: 202.12.01

Similar Messages

After iphoto 9.1.5. problem with editing photos

After I did the 9.1.5. update I have a problem with editing photo's. My photo's are about 35mb a piece.. they are panoramic photo's. Editing used to work perfect in iphoto 8.. after I went to iphoto 9 it became buggy.. (it crashes on certain photo's that 8 could handle without a problem).. but I learned to live with it. Now I did the 9.1.5. update and I can edit maybe 2 or 3 pics without a problem.. then when I get to number 4 Iphoto will show me a black screen.
If I close iphoto and start it again, I can continue where I left off.. untill I get to a picture that seems to ruin the party.. and then I have to restart again..
Iphoto 8 used to work so smooth with panoramic photo's.. dont know where it went wrong..

There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

I cannot edit project in project server after editing it in project professional

Hi
i cannot edit project in project server 2013 after editing it in project professional.
i.e I created an enterprise project in project server and then edit it with project professional. after i published it to the server and open it with project server, it shows the changes. but when i click on a cell, suddenly the task list and gantt table
hidden!!
it happens even if I start a project with project professional.
I'm the admin user.
what's the problem?
Thanks.

CU means cumulative updates, which are intermediate bug fix packages between SP. The latest CU for Project 2013 was release on September 12th. See reference
here.
Can you try to reproduce the bug with
IE in compatibility mode?
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Can anyone help me with an iWeb problem? I cannot save the site after making changes. I receive this error: "website.sites2 could not be saved"

Can anyone help me with an iWeb problem? I cannot save the site after making changes. I receive this error: "website.sites2 could not be saved"

You could try duplicating the Domain.sites2 file and launch this in iWeb. Delete the last page you edited and try saving. If that doesn't work, undo and try deleting another and so on...
If you can find the problem page you would only have to rebuild it rather than the whole site.
The other possibility is to create a new site on the same domain file and drag each page in turn down to it from the top site and try to save each time.

Problem with editing parts

Hello everyone.
I have problem with editing parts when I'm login as manager. when i click on edit icon on parts detail page portal is openning home page. (ver. 5.9 pl 7)
thanks
Greg.

Hi
I think that all rights are ok any other idea.
I have the same problem on two implementations. Some times is better then i change in web.config debug="false"
Can you try to answer to my second post home page after login please.
when i roll over etid icon i have following link
http://89.234.5.207/admin/catalog/Part.aspx?partno=505620 +0&backpage=PartSearch.aspx
part code is 5056 20 0
maybe it will be helpful
Greg.
Edited by: Grzegorz Jachec on Jan 29, 2008 5:14 PM

Problem with battery running down more quickly after downloading OS6 to 3GS iPhone

Problem with battery running down more quickly after I downloaded OS6 to 3GS iPhone.

gdgmacguy
I guess I should have asked for the "definitive" fix. I read several "fixes" but it seems no one knows if Apple has a definitive fix. Kind of like going into an Apple store and getting three different answers from three different reps. At least they are not rude and no, I don't have a problem searching the forum.
<Edited by Host>

Problem with Edit IN function between LR 2.3 and PS CS3

I recently upgraded my system to a Windows Vista 64 bit Core 2 Quad with 8 GB. Lightroom now works and loads images the way it should. I do have one major concern and need any help possible.
I am using LR 2.3 in 64 bit and PS CS3 ver 10.0.1 (which is 32 bit - loads slowly but otherwise works fine). The problem I am encountering is in LR Develop / Photo / Edit In... - using any of the menu items:
"Edit in Abode Photoshop CS3"
"Open as Smart Object In Photoshop"
"Merge to Panorama in Photoshop"
"Merge to HDR in Photoshop"
"Open as layers in Photoshop"
Photoshop opens but no image(s) are exported and I receive the message in LR - "The file could not be edited because Adobe Photoshop CS3 could not be launched."
Photoshop, however, was launched but no image exported and so I can't work on the image in PS. The appropriate TIFF image is created in LR for the first two menu items - nothing for the last three menu items.
I can create a partial work around by setting PS as an external editor, however, I can't use 4 of 5 of the menu items.
All the menu items work fine in Windows XPpro.
Any help is much appreciated.
PS I also tried the most recent Window 7 RC with exactly the same results.
Thanks
Bob

Don
I wasn't shouting - I just cut and paste the exact text and font in its original size and type as was shown in the message. Never had a thought that someone would be offended by cutting and pasting exactly what was in a message - it would appear that John Williams saw it for what it was.
However, sorry if I offended you.
Bob
Date: Mon, 1 Jun 2009 19:15:15 -0600
From: [email protected]
To: [email protected]
Subject: Problem with Edit IN function between LR 2.3 and PS CS3
There is no reason to shout. There are only other users here trying to help.
>

Two Problems -"0" value continues to be displayed after input, I need to create a look-up table

First off, I am a LiveCycle newbie, I stumbled across the program a couple of weeks ago so I'm drinking from a firehose trying to understand all of this. I have a deadline (May 15th) to create a form for field crew deployment, and also, this is part of my Grad project that will be in my presentation on May 28th.
All of that being said, here's the scenario:
I have a custom data collection form that I have created that is functional but I have run into a few problems. First, in a calculated field box, a "0" shows up in the boxes which is fine. The problem is, one will not go away after a value is entered for the calculation. The calculated number shows up, but it is superimposed over the "0". This is the only calculated box this happens in, I have 12-15 throughout the fom with no issues.
I'm using FormCalc in the entire sheet and the formula for this specific calculation is this:
form1.#subform[0].PrevIndxWrksht[11]::calculate - (FormCalc, client)
PrevIndxWrksht[12]*1
This is the same calculation used on ever other field (except the "multiply by" value) and this is the only one with the non-dissapearing "0".
2nd - these forms will be running on Android tablets, there are Windows Office Suite emulators but not the actual program and Access is a complete no go. I have drop downs that have 1114 vegetation species (same for each drop down). I need to be able to have the species relate to a "indicator status" field that will select the proper indicator based on the species. There are only 5 indicators so unique ID's of 1-5 can be used. Without the ability to link to Access how can I accompish this? The Excel emulator will work on the tablets so I'm guessing I can create a spreadsheet with 3 columns that have Key, Species, and Indicator Status? As I said, I'm new to the LiveCycle scripting, so please make it very simple for me.
BONUS QUESTION!!! Is it possible to type in the first three letter of the species and have it scroll to that point in the drop down? With that many species we now type in the first letter and it will go to the first species genus alphabetically, but entering the second letter will jump to the next genus. I'd like to enter (example) "SAL" and have the drop down jump to "Salix alaxensis", the first species with the genus "Salix"
Thanks in advance, sorry for the long form questions.

If anyone could address just one of these problems I'd appreciate it. I've had 118 views with no response.

I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the b.u. stops

I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the backup stops. The system preferences are set to "Never" for Computer sleep and Display sleep. The computer does not ordinarily log off automatically, but it has done this twice since I started the Time Machine backup.

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If all you see are messages that contain the word "Starting," you didn't clear the search box.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

Problem with 'Edit Locally' command -- Due to IISProxy?

Hi,
We have a problem with 'Edit Locally' command since we are using Windows Authentication. Our architecture is:
SAP EP 6.0 SP2 Patch 28 (Solaris)
IIS Proxy (Windows 2003)
The situation is:
If we access to SAP Portal using old url (directly to Solaris) using form-based authentication we do not have any problem with 'edit locally' command.
However, if we access to SAP Portal using IISProxy and Windows Authentication we get an 'Operation failed' error message.
     Java plug-in console shows the following message:
cargar: clase com/sapportals/wcm/app/docapplet/DocApplet.class no encontrada.
java.lang.ClassNotFoundException: com.sapportals.wcm.app.docapplet.DocApplet.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more
Where is the problem? Is due to authentication method? SAP Portal or IISProxy configuration?
Thanks,

Thanks for your comment,
Now, we have tested with version 1.5.0_01 plugin version but the result is the same: 'Operation failed'
This is a very important topic to solve before installing Windows Authentication in a productive environment.
Has anybody any solution?
Damiá

Problems with System Update 3.14.0019 after installation SP2

Have you encountered problems with System Update 3.14.0019 after installation SP2 for Windows Vista?
After this upgrade I view this error: "An error occurred while gathering user information."
Thanks for the help

A known issue. It wasn't supposed to be supported until SP2 is RTM. However, look at the stickied post in the forum for some bad news about SU.
x61s

I have an email account causes the machine to hang up after being in use for a day. It only occurs on my Macbook Pro and only one particular account. The problem account works fine on my iMac and Windows Machines. Any ideas what is causing this?

I have an email account causes the machine to hang up after being in use for a day. It only occurs on my Macbook Pro and only one particular account. The problem account works fine on my iMac and Windows Machines. I have been to the local Genius bar and through trial and error we have determined that Mail is working ok but somehow the account is causing the problem. I have used this account for years. Any ideas what is causing this?

No idea why, but one thing you may try if you have the time, is create a new user, and set up the problem mail account in the new user space. See if it causes your MBP to hang as well. That will tell you if it is something wrong with your main User, or something wrong with MBP.
Assuming this works, I'd nuke the problem account in your main user space, re-start, and reinititate the account and see if that helps.
Depening on how many email accounts you have setup, it may be necessary to nuke the whole Mail folder in your User/Library.... Hard way to get it to work, but just my idea.

Problem in Edit Message Payload in AE

Hi all,
actually we have a problem with editing the message payload of a failed message in the adapter engine.
Messages Editor shows "The version you want to edit is locked"
Log in NWA shows "EditorDynPage: loadMessage()
Thrown:
com.sap.aii.mdt.api.exceptions.OperationFailedException: VersionAlreadyLockedException in Method: AdapterFrameworkMonitoringBean: getTransferMessage( Query ). The version you want to edit is locked. Message: Version 1 of message 4eb86ecc-fb6b-0c10-e100-80000a93147c(INBOUND) is already locked for editing.; To-String: com.sap.engine.interfaces.messaging.api.version.VersionAlreadyLockedException: Version 1 of message 4eb86ecc-fb6b-0c10-e100-80000a93147c(INBOUND) is already locked for editing."
How to delet te lock, the nwa => problem management => locks shows no locks?
regards Ralf

Hi,
In NWS, you should also have a tab "Database Locks". See detail in this [SAP help|http://help.sap.com/saphelp_nwpi711/helpdata/en/48/b2e0156b156ff4e10000000a42189b/content.htm].
regards.
Mickael

Problems with a new IP phone 7906 after factory reset

Hi Guys
I am currently having problems with my new IP phone 7906 after doing factory reset and here is a video of it:
http://www.youtube.com/watch?v=vvCLtwIAwVw
I used this command I found on the net:
Hold down
while plugging in the phone and keep holding it until the message waiting indicator (red light) starts blinking. Then
release # and type 123456789*0# in sequence.
I was trying to switch my phone to sip and it also dont want to take tftp setup either.

Tim,
Found this on the net
http://www.cisco.com/en/US/ts/fn/620/fn62949.html
Might be woth giving it a go
6.Pull power on the phone (even if power is PoE).
7.Hold down the # key on the phone.
8.Continue holding down the # key and re-apply power.
9.While still holding the # key wait for the Message Waiting Indicator (MWI) light on the handset to start flashing.
10.Once the MWI light is flashing, release the # key and enter the following sequence exactly on the keypad:
3491672850*#
Once this sequence has been entered on the IP Phone, if all the network criteria above have been met, it should begin its recovery process. This process can take up to 15 minutes to finish. The phone may appear to be doing nothing during this time. However, if the phone does not recover after 20 minutes then it is possible that the recovery is stuck. In this case, re-examine your network and verify that steps 1-4 are in place, then re-issue the factory reset sequence.
* Note: The factory reset sequence is a way for a phone to clear flash and still upload to a valid firmware image. This is facilitated by the termxx.default.loads file, but requires that the image files listed in the termxx.default.loads file are available in TFTP for the phone to download. Open the termxx.default.loads file in any text editor. This loads file is essentially just a packing list showing all the OS and application files the phone needs to function. The files include a cnu, cvm, dsp, app and jar files. Please make sure that these files as listed in the termxx.default.loads file are in TFTP. ("xx" will be either "06" for the CP-7906G model, or "11" for the CP-7911G model.)
Additional Diagnostic Steps:
- Try a hard-coded IP address as a test to see if this resolves the upgrade failures. If it does, and the number of failing IP Phones is relatively few, this procedure may be the most expedient. After the IP Phone upgrades successfully, reconfigure the IP Phone to use DHCP.
- Try putting the phone on a hub or a different switch and see if this helps change the startup timing enough so that the upgrade completes successfully.
Regards
Alex

HT4943 I bought a magazine subscription on my iPAD and after being charged, it does not come up on my screen. Has anyone had this problem?

I bought a magazine subscription on my iPAD and after being charged, it does not come up on my screen. Has anyone had this problem?
When I click on the magazine, my screen is just blank. I can see the purchase, and in my settings/store, the magazine shows "ON".

I would do a power cycle/reset of your device first, if you haven't, to rule that out.
http://support.apple.com/kb/HT1430
If that doesn't help, talking to iTunes customer support would be in order...or whoever you purchased the magazine subscription through.
http://www.apple.com/support/itunes/
If the magazine is browser based, you might also try another browser. I like "Atomic Browser". It is available on the app store.

Problems in editing To Do on E75 after being syncr...

Similar Messages

Maybe you are looking for