Problems in figuring out MySQL after installation on Mac Pro, Mac OS X Version 10.7.5
I recently installed MySQL on my Mac Pro and seem to be having difficulty understanding how it works. Also, I am a beginner in MySQL. I have tried loads of websites to figure out how I needed to start using it, sadly none helped. Like for starters changing the root password or the first thing I should do after installing the package. You could say I have absolutely no idea and don't want to copy paste commands at random in the terminal and mess things up.
It would be great if you could help me understand this better.
Thanks in advance.
No.. Logic Pro X requires 10.8.4 or later....
To Purchase and install Mountain Lion these days.. you must buy a download content code from Apple directly... It is no longer available directly via the Mac App Store as an item you can select and buy...
If you are in the US then this link will help you...
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion
Similar Messages
-
how do I figure out if I have usb 3.0? I am trying to buy compatible external hard drive (western digital my passport for mac) and I can not figure out if it will work with my mac book.
Dont buy a Western Digital, get a Hitachi or Seagate (Toshiba is made by Hitachi). These are the most reliable, and the HD used inside Macs.
ALL HD can be made compatible with your MAC (including a WD if you already bought same), ......they just need to be formatted for the Mac platform, format them in Disk Utility as Mac OSX extended journaled. -
Problems with TV Out signal after upgrading to iOS 5.1
Has anyone experienced problems with TV Out signals on their iPad 2 using the Apple HDMI Adapter after upgrading to iOS 5.1? I am trying to connect to my HDTV after upgrading and cintunally receive an "Unsupported Video Signal" message with a blank/back screen. Prior to upgrading, I had no connection problems and could view TV Shows, Movies, Music Videos, Keynote, etc...without problems. I've been unable to find any resolution to this problem, even followed Apple guidance to detach and reattach the HDMI adapter without success. Seems like a software bug to me and it's a major problem when trying to conduct business or personal activities. Hopeing Apple has a fix in work already...anyone else have any ideas? Thx in advance...
Try a reset. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo. It is safe to do, there should be no content loss. It is the same as rebooting your computer.
If that does not work, restore the iPad to the factory settings. -
I am trying to install Windows 7 Home Premium 32 bit on my 2006 Mac Pro (Upgraded to 2,1 firmware). However after the installation has been completed and the computer restarts it just reboots back to the start of the Windows set up installation process. If I restart it and select the Windows disk drive at start up with the install disc removed disc drive then all I get is a black screen with a flashing underscore in the top left corner.
Any help would be greatly appreciated.
Computer Specs:
Mac Pro (Early 2006) 2,1 firmware
2x 2.66 GHz Dual-Core Xeon
8 GB 667 MHz DRR2 Ram
Nvidia GeForce 7300 GT
OS X Lion 10.7.5While not same scenario, the chart you'll see is useful.
Going from Vista U. 64 to W. 7 64 Home Prem. I unknowingly lost support for more than 1 processer
See maximum physical CPUs supported below.
In Vista U. Mac Pro 3.1. Task Manager showed 8 performance graphs (1 graph per cpu/mem).
in Winndows 7 Home Prem., there are 4.
Scroll down to edition comparison chart.
http://en.wikipedia.org/wiki/Windows7editions -
Having problems with Labview 7.0 after installing Windows XP Pro
After updating Windows XP Pro from Windows 98, my programs give me the following error:
The procedure entry point SUnMapLS_IP_EBP_12 could not be located in the dynamic link library KERNEL32.dll
I tried reinstalling Labview 7.0, but to no avail.Hello Becky,
I performed all the windows xp updates when I installed xp.
Our computer has labview 6.0 and 6.1 on it. I thought maybe they were causing a problem, so I tried uninstalling them. I downloaded msiblast and tried to remove Labview 6.0 and 6.1, but since they used to be on a network, and the university does not carry those programs anymore, they gave me errors. I was able to uninstall 7.0 and reinstall it, but it still gave me the same error as described in the original post.
I went into the registry and removed 6.0 and 6.1, but it still gives me the same error.
I need a way of removing 6.0 and 6.1 so that I can do a clean install of 7.0.
Thanks for your help,
Sergio
Attachments:
Serg_usf_Screen_Shot.doc 550 KB -
I can not figure how to create a Adobe PDF Printer. Normally when you install the package ( CS6 Standard for Mac Pro) the installer creates the PDF printer automatically. In the System Preferences under the Printer/Fax I don't see the PDF printer. How do you create the PDF printer.
Thanks,
Melaniedid you install acrobat x and does it work as expected?
-
Problem with services of SAP after installation of ABAP on MS SQL server
Hi,
I am trying top install 2004 Netweaver ABAP+ JAVA on my machine
Following is my machine configuration -
Machine type - Windows 2003 Standard Edition SP1
Machine name - pun-idmqa-vm1
SAP Instance name - QSA
DB type - MS SQL 2000 SP4 + hotfixes and instcoll.exe is executed. After nstalling SQL shows server proper as SQL_Latin1_General_CP850_BIN2 collation
Message port - 3600
I could sucessfully install Database from CD and thereby could sucessfully install ABAP. During postinstall I tried to start the server. all the following services got up -
msg_server.exe
disp+work.exe
igswd.exe
But after some time 2nd service goes down. Following is the error message flashed in
trc file: "dev_disp", trc level: 1, release: "640"
Mon Jul 02 16:33:16 2007
kernel runs with dp version 128000(ext=102000) (@(#) DPLIB-INT-VERSION-128000-UC)
length of sys_adm_ext is 524 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 31
intno 20020600
make: multithreaded, Unicode
pid 2492
***LOG Q00=> DpSapEnvInit, DPStart (00 2492) [dpxxdisp.c 1100]
Mon Jul 02 16:33:17 2007
shared lib "dw_xml.dll" version 31 successfully loaded
shared lib "dw_xtc.dll" version 31 successfully loaded
shared lib "dw_stl.dll" version 31 successfully loaded
shared lib "dw_gui.dll" version 31 successfully loaded
Mon Jul 02 16:33:21 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 10528 (1316)
DpShMCreate: sizeof(tm_adm) 2780232 (13832)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpShMCreate: sizeof(comm_adm) 290000 (580)
DpShMCreate: sizeof(vmc_adm) 0 (372)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: SHM_DP_ADM_KEY (addr: 054B0040, size: 3192688)
DpShMCreate: allocated sys_adm at 054B0040
DpShMCreate: allocated wp_adm at 054B1B58
DpShMCreate: allocated tm_adm_list at 054B4478
DpShMCreate: allocated tm_adm at 054B44A0
DpShMCreate: allocated wp_ca_adm at 0575B0E8
DpShMCreate: allocated appc_ca_adm at 05760EA8
DpShMCreate: allocated comm_adm_list at 05762DE8
DpShMCreate: allocated comm_adm at 05762E00
DpShMCreate: allocated vmc_adm_list at 057A9AD0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 057A9AF8
DpShMCreate: allocated wall_adm at 057A9B00
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
Mon Jul 02 16:33:22 2007
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 1132 MB
<ES> 1131 blocks reserved for free list.
ES initialized.
Mon Jul 02 16:33:36 2007
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.6.1 2.6 4.0) [dpxxdisp.c 1462]
Mon Jul 02 16:33:38 2007
***LOG Q0K=> DpMsAttach, mscon ( pun-idmqa-vm1) [dpxxdisp.c 9719]
Mon Jul 02 16:33:46 2007
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
Mon Jul 02 16:33:47 2007
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 31
Release check o.K.
Mon Jul 02 16:34:20 2007
ERROR => W0 (pid 2740) died [dpxxdisp.c 12170]
ERROR => W1 (pid 3736) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 3876) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 3896) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 3852) died [dpxxdisp.c 12170]
ERROR => W5 (pid 2008) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 3776) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 4052) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-2740 (SIGUSR2)
ERROR => DpWpKill(2740, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-3736 (SIGUSR2)
ERROR => DpWpKill(3736, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-3876 (SIGUSR2)
ERROR => DpWpKill(3876, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-3896 (SIGUSR2)
ERROR => DpWpKill(3896, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-3852 (SIGUSR2)
ERROR => DpWpKill(3852, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-2008 (SIGUSR2)
ERROR => DpWpKill(2008, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-3776 (SIGUSR2)
ERROR => DpWpKill(3776, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-4052 (SIGUSR2)
ERROR => DpWpKill(4052, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 02 16:34:30 2007
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Mon Jul 02 11:04:30 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2740 Ended no 1 0 0
1 DIA 3736 Ended no 1 0 0
2 UPD 3876 Ended no 1 0 0
3 ENQ 3896 Ended no 1 0 0
4 BTC 3852 Ended no 1 0 0
5 BTC 2008 Ended no 1 0 0
6 SPO 3776 Ended no 1 0 0
7 UP2 4052 Ended no 1 0 0
Dispatcher Queue Statistics Mon Jul 02 11:04:30 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 7 ( 77%), shm 2 ( 22%)
since last update total 9, udp 7 ( 77%), shm 2 ( 22%)
Dump of tm_adm structure: Mon Jul 02 11:04:30 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Jul 02 11:04:30 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 02 16:34:35 2007
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (3832) (SOFT_KILL)
Stop icman
killing process (3960) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:3832 HANDLE:1600)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 02 16:34:36 2007
NiISelect: TIMEOUT occured (1000 ms)
Mon Jul 02 16:34:37 2007
[DpProcDied] Process died (PID:3832 HANDLE:1600)
[DpProcDied] Process died (PID:3960 HANDLE:1588)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'pun-idmqa-vm1'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9945]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1608
MsIDetach: detach MS-system
Mon Jul 02 16:34:38 2007
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 2492) [dpxxdisp.c 8478]
Good Bye .....
I am new to SAP EP installation. Please help me regarding this issue.
Thanks and Regards,
Smithaforgot to tell you, after that probably you will need to make the installation again.
good luck. -
So for the past few weeks I've been trying to update the 10.9.2 update on my imac (2010 - 21.5 inch) and when I attempt to try to update the software my screen goes grey with a Software Updater top bar the shows up on the top of the grey screen and then just quits doing anything (except the screen saver which works after nothing else happens - and that shows you how long I've been waiting for the grey screen to magically do something. I've attempted downloading the software update then installing it but the same thing happens. I don't think any of my 3rd party software is the cause of this and i'd rather not uninstall the programs since the update won't even do anything. Utility is telling me nothing but the usual ARD element unable to be modified.
With the several failed attempts at installing this update (probably around 15x) my computer will not shutdown nor restart on command anymore. The only way I can shut it down is holding the power button.
I used to have so much faith in Apple products and used to be a devoted user, but since Jobs passed away the direction of Apple has gone down the toilet.Well Bababooey if you're comparing yourself to a Apple Genius Bar then you should already know my answer, your snarky remark get a snarky reply. Why would I go to a salesperson to fix my computer problem when I can go directly go to the source itself. I used to sell Apple computers over 8 years ago and was apple certified before the Genius bar existed. If I am to go about fixing an issue I can't fix on my own I will go to the source itself meaning Apple's programmers and developers - being UI UX Developer myself I know they should have QA'd all platforms and troubleshooted any arising issues.
This was also the first time in the 20 years I've been using a Mac that I even attempted to go on this forum which i thought would put me in connection with a certified Apple representative. This turned out to be a complete waste of time just being a public forum with no Apple employee involved. I was hoping to find a quick fix but in turn I was only frustrated with stupid responses such as yours that were in no way an answer to my original question.
BTW I fixed the issue on my own and without your help or Apples help. I'm glad if all forums point here regarding this issue because I now have the answer. The answer I was looking for from someone earlier was as simple as this {Download Maverick and reinstall the platform - it will take an hour to do but afterward 10.9.2 was installed and my computer is now able to shutdown and restart without having to do a hard boot.} No more software update bar at top and no problems with my drive which I told both you and Grant - I know my computer better than you and I've probably been using them longer than you.
So again Babowa you were so wrong...... and I am right.
Again anyone having the same problem, I suggest reinstalling Maverick and you'll be suprised 10.9.2 will work fine. -
SUP 2.0 Installation problem -SUP services dont start after installation
Hi,
I have installed a licensed version of "SUP 2.0 Personal developer 32 bit" on my machine from https://sybase.subscribenet.com. I installed 4 RAR files (sup0200_dev1_win to sup0200_dev4_win) of around 1.66 GB. I have unzipped all the sub-folders inside after unzipping the 4 main RAR files.
I followed the installation steps and installed all components on a single host.
Everything was fine while installing but I am facing these problems:
1. When I click Start > Programs > Sybase > Unwired Platform > Start Unwired Platform Services... nothing starts.
2. When I open Sybase Unwired WorkSpace I dont see any "Start Development" or any "WorkSpace Navigator" or anything specific to SUP Workspace. Only specific to Eclipse is what I see.
3. Most of the folders in the installed path is not there or are empty. For e.g. The folder Servers\MessagingServer\Data is empty.
For another information I see some error in the installation log like:
+(Nov 3, 2011 11:38:31 PM), , com.sybase.stf.install.uep.wizardaction.CopyInitConfigFiles, err, Could not copy directory D:\Sybase_Installables\sup0200_dev3_win\modules\mobileserver\syscheck to D:\Sybase\UnwiredPlatform\Util\syscheck ServiceException: (error code = -30000; message = "The system cannot find the path specified. (3)"; severity = 0)
The strange thing is during installation the setup does not throw any error and I go to Finish the setup. Also I am able to successfully uninstal.
Could anybody please guide me how what could be the problem. I suspect the installable is not appropriate.Hi
Do you see the services as being installed? What OS are you installing on?
I had to do a reinstall one time to get everything up and running, I also had the issue of the services not being properly installed (got a successful message after my first install but that in general seems to mean very little). I then carefully went through the prerequisites again and on second try things worked correctly.
Bjorn -
Problem in starting using SAP after installation
I installed the 'Web application server' from SAP NetWeaver 7.0 Java Trial Version.
But when I am starting the server, nothing happens.
Is the problem because I have not installed SAP Netweaver Developer Studio. How do i install that?
There are 4 installations on the link provided. which one do I install?I started it and gave username and password. But how do I know if something is going on in the background? How long should I wait?
Should I also install Developer Workplace Trial also from Sneak preview downloads?
The password has to be OS user password (given during installation) or windows logon password -
Blinking dash problem on Macbook 2008 unibody after installation Windows 7
Hello everybody,
I installed Windows 7 (professional x86) with bootcamp (3.0.1), installation good, but when I want to boot on Windows 7, I have a blinking dash and I can't do anything.
I have a macbook 2008 unibody, last version of mac osx.
Before I had windows XP and I don't had any problem.
Need help plz.
Any suggestions ?
Regards.I need help!! T-T
-
G5 cuts out randomly after installling new RAM
Hi all,
I have a Powermac G5 (1.8GHZ) and have just installed some new RAM taking it up to 6Gb. It worked fine for a couple of weeks and then myseriously shut down one day. When I tried to re-boot it turned on OK, chimed but then cut out a few seconds later. Thinking this would be the RAM I took it all out and restarted with my original setup. Everything worked fine... So then I thought I would add in the new ram gradually to see if I could find out which card wasnt working; I ended up adding the whole lot and it worked just fine.
Then all was fine for another couple of weeks and exactly the same thing happened. This time the computer only turned on properly once the old RAM was in the first two slots. Then I added the new RAM and all is fine again. Is this a problem with the RAM as it does seem to work..up to a point.... Any ideas??
thanks for your help!
JayPerhaps it's time for this......
Try running your Apple Hardware Test . It's not perfect, but may flag something.
DALE -
Could someone help me figure out why after saving a form some subforms are hidden again
I am asking this on behalf of a coworker. We have a form she is working on with a drop down (ddlDropDown) with 1, 2, and 3 listed (same values,,1,2,3) That trigger hidden subforms to appear (Employee1, Employee2, Employee3). Initially, Employee1 is visible. If form user selects 2 or 3 in the dropdown then Employee2 and Employee3 become Visible. Once the form is filled in, saved, closed and reopened Employee2 and Employee3 are hidden again even though the dropdown says 2 or 3. The script behind the dropdown's change event is:
subSELECT.Employee1.presence=this.rawValue==1?"visible":"hidden";
subSELECT.Employee2.presence=this.rawValue==2?"visible":"hidden";
subSELECT.Employee3.presence=this.rawValue==3?"visible":"hidden";
I have tried adding this code to the form's initialize, docReady, preOpen, postOpen, layout:ready events but it still doesn't work.
Any ideas?Here is a sample I created based on your comments and it works just fine for me after saving the form.
Employee2 and Employee3 subforms have their presence property set to hidden. I have the script in the exit event of the dropdownlist.
Here is the sample:
https://workspaces.acrobat.com/?d=YWMOMIyD2lLEqPSdO0vqYQ -
Problem creating asm disk groups after installation.
I just completed the grid install successfully on Oracle Linux:
Candidate ASM disks not showing up in 11.2 installer (Oracle Linux)
Thanks for the help.
I am running into the same type of issue where I can't see the asm disks like I ran ran into during the install.
When I run asmca to create the addditional disk groups I don't see the two asmlib volumes.
I tried changing the disk discovery path from the default and I still can't see the disks.
$ /usr/sbin/oracleasm listdisks
CRSVOL1
DATAVOL1
FRAVOL1
Do the block devices need to be owned by grid?
$ ls -l /dev/sdc
brw-r----- 1 root disk 8, 32 Aug 2 15:21 /dev/sdc
$ ls -l /dev/sdd
brw-r----- 1 root disk 8, 48 Aug 2 15:21 /dev/sdd
$ ls -l /dev/sde
brw-r----- 1 root disk 8, 64 Aug 2 15:21 /dev/sde
How can the installer work fine and see the disks and then asmca can't see the disks?
It must be a permissions issue. How can I see what the error is that is preventing the disks from showing up?$ cd /dev/oracleasm
node 2:
$ cd /dev/oracleasm
$ ls -lL
total 0
-rw-rw---- 1 grid asmadmin 0 Aug 15 11:08 .check_iid
drwxr-xr-x 1 root root 0 Aug 15 11:08 disks/
-rw-rw---- 1 grid asmadmin 0 Aug 15 11:08 .get_iid
drwxrwx--- 1 grid asmadmin 0 Aug 15 11:08 iid/
-rw-rw---- 1 grid asmadmin 0 Aug 15 11:08 .query_disk
-rw-rw---- 1 grid asmadmin 0 Aug 15 11:08 .query_version
$ ls -lL disks/*
brw-rw---- 1 grid asmadmin 8, 33 Aug 15 11:08 disks/CRSVOL1
brw-rw---- 1 grid asmadmin 8, 49 Aug 15 11:08 disks/DATAVOL1
brw-rw---- 1 grid asmadmin 8, 65 Aug 15 11:08 disks/FRAVOL1
node 1:
$ cd /dev/oracleasm
$ ls -lL
total 0
-rw-rw---- 1 grid asmadmin 0 Aug 15 12:30 .check_iid
drwxr-xr-x 1 root root 0 Aug 15 12:30 disks/
-rw-rw---- 1 grid asmadmin 0 Aug 15 12:30 .get_iid
drwxrwx--- 1 grid asmadmin 0 Aug 15 12:30 iid/
-rw-rw---- 1 grid asmadmin 0 Aug 15 12:30 .query_disk
-rw-rw---- 1 grid asmadmin 0 Aug 15 12:30 .query_version
$ ls -lL disks/*
brw-rw---- 1 grid asmadmin 8, 33 Aug 15 12:30 disks/CRSVOL1
brw-rw---- 1 grid asmadmin 8, 49 Aug 15 12:30 disks/DATAVOL1
brw-rw---- 1 grid asmadmin 8, 65 Aug 15 12:30 disks/FRAVOL1 -
Problem starting Acrobat 6.0 after installation of Adobe Reader 10
Every time i start acrobat 6.0 i am getting the following error:
there was an error while loading the plug-in HTML2PDF.api
there was an error while loading the plug-in PPKLite.api
Worked fine with adobe reader 9
I have the last update of Acrobat 6.0.6I have had the exact problem today. Would you mind
explaining in a little further detail the repairs you suggest. Thank you very much.
[email address deleted by host]
Maybe you are looking for
-
Adding free quantity in sales order
hi guru's In my sales order, i am getting item, material description, order qty ,amount in first line and item, material description, free qty, amount in second line. i want to print order qty and free q
-
DVR620KU Recording Problem VHS-DVD
Having a problem copying from a VHS tape to DVD. Followed the instructions in the Owners manual and and checked the input settings but when the recording process is completed there is nothing on the DVD. Any suggestions ?? Solved! Go to Solution.
-
I am having Adobe Reader 8, Windows XP Professional SP 2 In the MS Word, in the File Open dialogue box, I can put a name of a particular folder on the left hand side vetical list -> something likfe 'Fovorites' concept. This saves me time in navigatin
-
Passing parameters to a method
I am passing objects to another method. I do some changes to them and expect the changed objects to be available in the calling method ( since they are supposedely passed by reference) when the execution is returned to it. However, I don't get the ch
-
Std idoc matmas05 details in SAP
Hi, How to see the details (logic etc) in R/3 System for standard idoc MATMAS05 to prepare a FS to interface with external system. Please advise what should i mention in FS in this regard. thank you.