Problems in Sending Data through JMS Bridge - WLS 10.3 to WLS 11g

I have a scenario where I need to send data from a queue configured on WLS 10.3 to WLS 11g. I am using OSB on WLS 10.3.
What I have done is
1. Created a JMS Based BS in OSB which sends data to jms://localhost:7001/ConnFactoryJNDI/QueueJNDI
2. Created a JMS Bridge on WLS 10.3
3. Source Destination has been configured as the one mentioned above.
4. Target Destination has been configured to a queue on WLS 11g.
When i execute the JMS Based BS in OSB, data is being written to the Source Queue directly. I am not sure of the JMS Bridge functionality but I assume that once data is written to the Source Destination, that data will be automatically pushed on the target destination.
I have configured a JDBC store for the target queue but I no table is created with the data sent from the source.
M i missing something here?

I think this question belongs to weblogic server, but as far as I know bridge should be created always at higher version. means, you should create bridge at 11g and try to pull/drop data from 10g. To check any errors in bridge, check the server log and make sure status of bridge is "forwarding messages"
Regards,
Anuj

Similar Messages

Problem in sending data through email in brodcasting

HI All
i am trying to send the data through email in the broadcasting. but as i execute the broadcasting the message comes
"Online processing is not possible for user 1"
further its is saying
"You want to execute a broadcast setting online. Processing this setting requires switching to another user (for example, with the user-specific precalculation of Web templates for a user other than your user). This is only possible in background processing."
but i dont know how to login as seperate user. as i have to send the data through my login and not someone else.
Hope i am clear.
Please help me on this its very urgent
Thanks

The solution to this problem is that:-
1. this is not an error
2. it gives the warning beacuse we cannot execute the broadcast setting at that moment (with different users in reciepient list) i.e. we have to schedule the broadcast settings.
Thanks
Prat

Problem in sending data to parallel port

Hello,
I can open a parallel port (LPT1) using java comm api i,e javax.comm.
but problem in sending data to parallel port,
I choose the appropriate port(LPT1), it is in bi-directional mode according to BIOS configuration.
but according to the java program the mode is SSP.
when i write data to parallel port the volt-meter give a reading of high state for all data pin (pin1 to 9) i,e the parallel port doesnot change state. I am using windows XP.
What is the solution?

try it on Open Solaris 10 or Linux platform.
also just try using the new FileWriter("LPT1").write("Hello");
on windows platform
Pravin

Problem in sending mail through dynamics actions

Hi Friends,
I have a problem in sending mail through dynamics actions . In this we pass a subroutine in dynamics actions which send an mail when promotion action occured.
Problem is that sometimes it will send an mail or sometimes not. I have no idea to solve this problem.
Can anyone suggest me .
Thanks ,
Anish
Moderator message : Duplicate post locked.
Edited by: Vinod Kumar on Sep 5, 2011 9:45 AM

Hi,
Check that all the bindings have been done in proper way as it is configured.. Try to do the binding manualy..This could also be the problem..
thank You

Sender sending data through XML, How to process it in ECC (No PI involve)?

Hi,
The sender system sending data through XML tag and that need to be processed in SAP side.
How it can be done without involving XI or IDoc?
Is it possible through HTTP post?
Sample XML Transactions
1. SAP Availability Transaction (Request)
<?xml version="1.0" standalone="yes"?>
<ECCAVAILREQUEST>
<AVAILTEXT>CHK STATUS</AVAILTEXT>
</ECCAVAILREQUEST>
2. SAP Availability Transaction (Response)
<?xml version="1.0" standalone="yes"?>
<ECCAVAILRESPONSE>
<AVAILTEXT>OK</AVAILTEXT>
</ECCAVAILRESPONSE>
3. DUMMY_SYSTEM PO Transaction (Request)
<?xml version="1.0" standalone="yes"?>
<DUMMY_SYSTEM REQUEST>
<CREATEPB>1</CREATEPB>
<POORDERDATA>
05607015156070151TORDAEHTWW05727500002D0979054+
</POORDERDATA>
4. DUMMY_SYSTEM Order/Inquiry Transaction (Response)
<DUMMY_SYSTEM RESPONSE>
<C_PO>99999</C_PO>
<RETURNDATA>
DAT

</RETURNDATA>
</DUMMY_SYSTEM RESPONSE>

Hi,
check this link
http://help.sap.com/saphelp_nw04/helpdata/en/21/e9c97ceb1911d6b2ea00508b6b8a93/content.htm
this is for processing inbound IDOc through XML-HTTP(Inbound) port
like this there should be an option for reading files placed by HTTP_POST.
in SICF transaction there should be a service to do that.
defaulthost -> sap-> xi-> adapter_plain. i know you don't have XI in your landscape but this is the component which be responsble for receving messages over HTTP_POST.
look for a program which can access messages from there.
please check with your basis team
Suresh

How to rollback a traansacation if we got any problem while sending data to

how to rollback a traansacation if we got any problem while sending data to a webservice...

Is it SOA or OSB? Which version you are in..

Problem in sending data to BW through XI

Hi all,
I am using "How to..push data to BW from XI".
There a javascript code is given for sending data to BW using XI.
But when I use that code for sending XML file it is showing a java script error:"Automation server can't create object".
I think it has something to do with ADODB.Stream object.
As given in the microsoft document I have deleted the registry entry which disables ActiveX component ADODB.Stream object.
Even then it is showing the same error.
Can someone figure out what is the problem.
Any help will be appreciated.
Regards,
Anand

Hi Anand,
        Sure, first i tried to send hardcoded data by using a report in bw, and refering the classes from transaction sproxy.
The code was:
REPORT ZZ_TEST_XI_POC.
*& Report ZZ_TEST_XI_POC
*& start of code by Anirban Ghatak , 14/03/06
*& This Report will send data to sap xi
*& start of code by Anirban Ghatak , 14/03/06
DATA prxy TYPE REF TO ZPUSHCO_PROXY_INTERFACE_OB.
CREATE OBJECT prxy.
DATA it TYPE ZPUSHPUSH_TABLE1.
TRY.
    it-PUSH_TABLE-EMP_NO = 'Anirban'.
    it-PUSH_TABLE-EMP_NAME = '393'.
    it-PUSH_TABLE-DEPARTMENT_NAME = 'NetWeaver'.
    CALL METHOD prxy->execute_asynchronous
      EXPORTING
        output = it.
     commit work.
CATCH cx_ai_system_fault .
    DATA fault TYPE REF TO cx_ai_system_fault .
    CREATE OBJECT fault.
    WRITE :/ fault->errortext.
ENDTRY.
*& End of code by Anirban Ghatak , 14/03/06
then execute it , this sends data to xi.
Refer /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
this can send data from bw to xi.
Try have a look and see if you can replicate, actually mine is a POC so i have a little bit of flexibility but if you are working on a live devlopement reconsider the solution.
Anirban.

J2ME app.: To update Oracle table by sending data through mobile phone

Hello all,
I want to develop a mobile app to update the table of oracle database by sending the data through the SMS (Short Message Service). Means I'll send a sms through my cellphone containing some data and this data will be used to update the remote oracle database. How to do that?. Plz help.
Thanx in advance.

hi
My problem is here I need to update the loginfo table with the file name, count of records, table name and datetime.
For instance my dat file is XX.dat
my database table name is Mytable
Total record count is 10,00,000 records
datetime as on this date
the data in the XX.dat file I am using the controlfile (SQL*loader and dumping into the Mytable.Now my 10,00,000 records are dumped into the Mytable.
This process information I want to store it in the loginfo table. For this I need the trigger
CREATE OR REPLACE TRIGGER MYTRIGG
AFTER INSERT ON MYTABLE
Declare
V_Count Number;
Begin
Select count(*) into V_Count from Mytable;
Insert into Loginfo(TotalRecords,Date)
Values(V_Count,Sysdate);
end;
This is the trigger I have used.But in my loginfo table instead of one value as 10,00,000 it is getting each record as row by row
1
4
100
1000
10,00,000
So I need only one value to be stored and at the same time my tablename and filename must also be stored.
Kindly help me
suroop

Sending data through a serial write box (vision processing)

Hi there, I am fairly new to labview and vision assistant. I was wondering if I could get some assistance on a particular problem we are having with our project. The idea is that we will use a webcamera to analyze a continuous loop of images and identify shapes, then send the data through the serial port to a controller which uses the mint motion language. The problem we are having is we cant sind a way to send the data we are getting from particle analysis to the serial port. Is there any way we can do this? I would be eternally grateful for any kind of pointers!
I will attach the write to box we are using right now as well as the program itself
Attachments:
bild.vi ‏104 KB
SKRIV2BOX.VI ‏31 KB

What you are searching for are the functions "Flatten To String" and "Unflatten from String".
Attachments:
FlattenToString - UnflattenFromString.vi ‏16 KB

Problem in sending mail through workflow

Hi All,
I am trying to create a workflow. I created a workflow and once document is made, this workflow trigerrs and i am able to get user decision to my user id. once if i click on approve, mail should be triggered to my mail id. but mail is not coming to my mail id. i checked in SOST transaction, <b>mail status set to Transmitted.</b>, and not as sent .
But i tested a sample test message from sbwp to my mail id and it is working fine. Only through workflow, sending message to outlook is not working. i checked my user in the system in SU01 transaction also, there also mail id is mentioned. what could be reason for not able to send mails through workflow.?
Its urgent.
Points will be awarded to all.
Regards,
vinoth

Hi,
Check that all the bindings have been done in proper way as it is configured.. Try to do the binding manualy..This could also be the problem..
thank You

Problem while sending fax through a SAP Smart Form

Hi,
I am trying to send fax through a smartform but it is not working, please see the details below.
I am calling the Function Module "SSF_FUNCTION_MODULE_NAME" in a PAI event. After storing the FM name "/1BCDWB/SF00000029"in a local variable "ls_frm_name", I am using that for printing the Form and at the same time to fax out the same by passing the following export parameters.
control_parameters type ssfctrlop with values
la_ssfctrlop_struc-device      = 'TELEFAX'.
la_ssfctrlop_struc-no_dialog   = 'X'.
la_ssfctrlop_struc-langu       = ls_supplier_info-spras.
output_options type ssfcompop with values
ls_ssffaxop_struc-tdteleland   = ls_supplier_info-land1.
ls_ssffaxop_struc-tdtelenum    = lfa1-telfx.
ls_ssffaxop_struc-tdfaxuser    = syst-uname.
ls_ssffaxop_struc-tdnoprint    = 'X'.
along with "fax_details = ls_zap1_fax_details" declared as interface parameters to the Smart Form.
But the Function Module is throwing following exception and not sending any Fax.
SY-MSGID-->OL
SY-MSGNO-->356
SY-MSGV1-->NOAUTHORITYCHECK
Do I need to pass any other values to the FM, I felt that this is not an authorization problem after debugging.
Can any one please help me in handling this exception and send the fax,
Thanks,
Srinivas.
Edited by: Venkata Srinivas Inavilli on May 20, 2008 2:40 PM

may it be that in those cases where it doesnt work, that you got no fax number?
Since it works soemtimes, it seems there are no errors, but rather in some cases some important info is missing, fax number may be one of thsoe important info in a FAX scenario.

Problem while sending FAX through PRINT_TEXT    FM

Hi All,
I have a problem while sending a fax.
we are sending fax through the FM PRINT_TEXT.
Below is the FM we are passing paramenters.
CALL FUNCTION 'PRINT_TEXT'
       EXPORTING
            APPLICATION              = 'TX'
            DEVICE                   = 'TELEFAX'
            DIALOG                   = SPACE
            HEADER                   = fs_header
            OPTIONS                  = fs_popt
       IMPORTING
            RESULT                   = fs_pres
       TABLES
            LINES                    = <b>int_fax</b>
       EXCEPTIONS
            CANCELED                 = 1
            DEVICE                   = 2
            FORM                     = 3
            OPTIONS                  = 4
            UNCLOSED                 = 5
            UNKNOWN                  = 6
            FORMAT                   = 7
            TEXTFORMAT               = 8
            COMMUNICATION            = 9
            BAD_PAGEFORMAT_FOR_PRINT = 10
            OTHERS                   = 11.
if sy-subrc ne 0.
    p_flag = lit_x.
endif.
In INT_FAX internal table we have two fields one is tdformat second one is tdline
The lengh of the TDLINE is 132 char,Initially for all reocords we have only 108 char length,But according to user requirement we added one more field in taht
Now the lengh increased to 132 for each records.
When i checked in debugg mode the INT_FAX internal table have all 132 characters.
The problem is while checking in SOST trnasaction it is showing 108 characters in one line and remaining in second line,can you please help on this.
Thanks In advance
Sriman.

may it be that in those cases where it doesnt work, that you got no fax number?
Since it works soemtimes, it seems there are no errors, but rather in some cases some important info is missing, fax number may be one of thsoe important info in a FAX scenario.

Sending Data Through a Output Stream...

Hello,
I am writing a program that works on a network...a server is running and client will connect to the server and send specific data for the server to complete transactions on.
The transactions that are mainly seen are SQL SELECT statements and as you can imagine a statement could bring back many records.
At present I have been able to send specific data through streams and have turned this into parameters on the server side and performed SQL. What I need help with or suggestions on is how to get the data back to the client. In some cases it may need to be displayed on screen or just used for further processing?
Please let me know if this is not 100% clear.
Thanks,
P

If you are able to send data over a network, then I assume that you know how to do network programming in Java, as well as knowing SQL.
Java has JDBC - Java DataBase Connectivity API that supports your requirements in full.
If you require a custom solution, then you need to be able to read data back from the server - when the server returns the ResultSet back to the client.
A Socket object has both input and output streams. Seems that you know about the output stream, do you not know about the input stream?
If the server is setup to send data back to the client over the same socket, then you should simply be able to read the results back from the socket's input stream.

Urgent!!!! Problem in sending mail through yahoo mail server

Hi
I have a yahoo account and I want to send email through yahoo mail server
using my java program. My program supports SMTP server authentication.
But when I connect to the yahoo mail server(smtp.mail.yahoo.com) I got this error
javax.mail.MessagingException: 521 yahoo.com closing transmission channel. You
must be pop-authenticated before you can use this smtp server, and you must use
your yahoo mail address for the Sender/From field.
This is my program
import javax.mail.*;
import java.util.*;
import javax.mail.internet.*;
import javax.mail.event.*;
import java.io.*;
public class JavaMailUserAgent
     Properties properties;
     Session session;
     Message message;
     JavaMailUserAgent(String mailHost,String smtpUsername,String smtpPassword) throws Exception
          properties=new Properties();
          properties.put("mail.smtp.host",mailHost);
          ServerAuthenticate auth=new ServerAuthenticate(smtpUsername,smtpPassword);
          session=Session.getInstance(properties,auth);
          message=new MimeMessage(session);
     } //**********************************************************************end constructor
     void sendMail(String messageFrom,String messageTo,String subject,String messageBody) throws Exception
          properties.put("mail.from",messageFrom);
          InternetAddress[] address={ new InternetAddress(messageTo) };
          message.setFrom(new InternetAddress(messageFrom));
          message.setRecipients(Message.RecipientType.TO,address);
          message.setSubject(subject);
          message.setContent(messageBody,"text/plain");
          Transport transport=session.getTransport(address[0]);
          transport.addConnectionListener(new ConnectionHandler());
          transport.addTransportListener(new TransportHandler());
          transport.connect();
          transport.sendMessage(message,address);
     } //*************************************************************************end function
} //*************************************************************************************end main
class ConnectionHandler extends ConnectionAdapter
     public void opened(ConnectionEvent e)
          System.out.println("connection opened");
     public void disconnected(ConnectionEvent e)
          System.out.println("connection disconnected");
     public void closed(ConnectionEvent e)
          System.out.println("connection closed");
} //*************************************************************************************end main
class TransportHandler extends TransportAdapter
     public void messageDelivered(TransportAdapter e)
          System.out.println("message delivered");
     public void messageNotDelivered(TransportAdapter e)
          System.out.println("message NOT delivered");
     public void messagePartiallyDelivered(TransportAdapter e)
          System.out.println("message partially delivered");
} //*************************************************************************************end main
class ServerAuthenticate extends Authenticator
     String smtpUsername = null;
     String smtpPassword = null;
     public ServerAuthenticate(String username, String password)
          smtpUsername = username;
          smtpPassword = password;
     protected PasswordAuthentication getPasswordAuthentication()
          return new PasswordAuthentication(smtpUsername,smtpPassword);
} //*************************************************************************************end main
I use this code to call the program.
JavaMailUserAgent jmail=new JavaMailUserAgent("smtp.mail.yahoo.com","my_yahoo_username","my_yahoo_password");
jmail.sendMail("[email protected]","[email protected]","test subject","test message");
Could you pls tell me why do I get this error eventhough My program has server authentication.
Is this my program error.Please Helpl me what to do to correct this problem.
Please include a sample code
thanks for listening
sabu

I have used the code below to send mail from yahoo account,but I got the error message like below,what I should configure in pop3 of yahoo account????
import javax.mail.*;
import java.util.*;
import javax.mail.internet.*;
import javax.mail.event.*;
import java.io.*;
public class JavaMailUserAgent
Properties properties;
Session session;
Message message;
JavaMailUserAgent(String mailHost,String smtpUsername,String smtpPassword) throws Exception
properties=new Properties();
properties.put("mail.smtp.host",mailHost);
ServerAuthenticate auth=new ServerAuthenticate(smtpUsername,smtpPassword);
session=Session.getInstance(properties,auth);
message=new MimeMessage(session);
//**********************************************************************end constructor
void sendMail(String messageFrom,String messageTo,String subject,String messageBody) throws Exception
properties.put("mail.from",messageFrom);
InternetAddress[] address={ new InternetAddress(messageTo) };
message.setFrom(new InternetAddress(messageFrom));
message.setRecipients(Message.RecipientType.TO,address);
message.setSubject(subject);
message.setContent(messageBody,"text/plain");
Transport transport=session.getTransport(address[0]);
transport.addConnectionListener(new ConnectionHandler());
transport.addTransportListener(new TransportHandler());
transport.connect();
transport.sendMessage(message,address);
} //*************************************************************************end function
} //*************************************************************************************end main
class ConnectionHandler extends ConnectionAdapter
public void opened(ConnectionEvent e)
System.out.println("connection opened");
public void disconnected(ConnectionEvent e)
System.out.println("connection disconnected");
public void closed(ConnectionEvent e)
System.out.println("connection closed");
} //*************************************************************************************end main
class TransportHandler extends TransportAdapter
public void messageDelivered(TransportAdapter e)
System.out.println("message delivered");
public void messageNotDelivered(TransportAdapter e)
System.out.println("message NOT delivered");
public void messagePartiallyDelivered(TransportAdapter e)
System.out.println("message partially delivered");
} //*************************************************************************************end main
class ServerAuthenticate extends Authenticator
String smtpUsername = null;
String smtpPassword = null;
public ServerAuthenticate(String username, String password)
smtpUsername = username;
smtpPassword = password;
protected PasswordAuthentication getPasswordAuthentication()
return new PasswordAuthentication(smtpUsername,smtpPassword);
public static void main(String str[])throws Exception
JavaMailUserAgent jmail=new
JavaMailUserAgent("smtp.mail.yahoo.com","[email protected]","passwordd");
jmail.sendMail("[email protected]","[email protected]","test subject","test message");
ERROR:
E:\mail\javamail\servlet>java ServerAuthenticate
connection opened
Exception in thread "main" javax.mail.MessagingException: 530 authentication req
uired - for help go to http://help.yahoo.com/help/us/mail/pop/pop-11.html
at com.sun.mail.smtp.SMTPTransport.issueCommand(SMTPTransport.java:879)
at com.sun.mail.smtp.SMTPTransport.mailFrom(SMTPTransport.java:599)
at com.sun.mail.smtp.SMTPTransport.sendMessage(Compiled Code)
at JavaMailUserAgent.sendMail(JavaMailUserAgent.java:58)
at ServerAuthenticate.main(JavaMailUserAgent.java:131)
How Could I rectyfy the above error ?????
Regards,
Mahesh.

Problem in Sending data to Backend.

Hi All,
Thanks for all who is answering all my quations. Now i am unable to send data to backend.
Model and Cardinalities are fine ( I am getting data from backend).
I created new element in comp controller and method(executing model). I am calling this method in wdInit() in view.
Do i need to write any code further to insert data into database.
Any idea, If you have code or example. Please provide me
Thank you
Regards
Ravi.Golla

Ravi,
*For sendind data to backend you need to create the model in your webdynpro
application and call your own/Standard BAPI/RFC enabled function module
to send/get data from your Back end.
*If you already done this and getting error then please check these
Check your Mapping and Binding
Check your JCO connections.
Check your code for executing your RFC module
Check your RFC FM/BAPI in your Back end
Regards,
Ram.

Problems in Sending Data through JMS Bridge - WLS 10.3 to WLS 11g

Similar Messages

Maybe you are looking for