Problems installing windows on a clean Mac Pro internal drive - issues and questions

Hey,
I have a Mac Pro mid 2010 with the following drive configurations:
3x120GB SSD in a RAID-0 as Boot (OS X 10.8.6) and SSD Scratch (working files)
3x4TB HDD in a RAID-0 as Master (data) and HDD Scratch (downloads)
1x100GB SSD (Spare...to install windows on)
I have literally tried every possible way of installing Windows 8 on that single SSD...both using bootcamp and without.
I can get it installed and working, install all the drivers/updates/software...involving multiple reboots into windows. Everything seems fine, and i shut down and boot into OS X, which works perfectly as expected. BUT, when i try and boot into Windows again (using <option> key at startupand selecting the windows volume, called "EFI Boot" which i did not name) I can log in and start using apps and then 20-40 seconds later i get the BSOD.
I can't for the life of me figure out why.
It's the easiest thing in the world to partition a single OSX drive to boot windows ON THE SAME DRIVE, but i can't seem to boot stably into a standaloe internal drive.
NOTE: I prepare the Windows drive by formatting the entire thing to "Free Space" using disk utility in Mac OS X, and can see that there are no partitions (EFI or otherwise) on the drive. Then I pull all the other drives except the target drive, reboot with a Windows 8 USB drive (created by BootCamp Assistant on my macbook air, because apparently some genius thought that task was too complicated for a Mac Pro...jks) and install from there.  The funny part is that i can pick out the target drive in the windows setup, it's registering as 1 disk/partition of UNALLOCATED SPACE, as expected, but there is a warming that windows cannot be installed on this drive because my computer does not support booting to this disk, and that i should check that it's controller is enabled in the BIOS.....which to the best of my knowledge is not used by intel-macs, which use UEFI. But i can still click "Next", so I do and install Windows and boot to this drive, restarting and installing software updates and drivers as mentioned above.
The BSOD seems to pop up only after i've rebooted to Mac OS X and then try to go BACK to Windows 8.
The version of windows 8 and install USB were checked using my macbook air, and they work flawlessly. ASLO that warning about not being able to boot to the drive during windows setup isn't present.
I'm wondering if the fact the the RAID volumes are a software RAID, using Disk Utility in OSX is causing windows some issues...which makes no sense.
I'll keep playing, but I'm not confident I'm ever going to find a solution.
Somebody be my hero...

Hey Hatter,
Another question for you:
I can't seem to use system preferences>>startup disk to boot into windows. When I select windows and then restart i get a black "BIOS-like" screen which then cuts out and a message is displayed that says "there is no bootable disc"
This stumped me, because I know i can boot into windows from the boot screen (holding down option and selecting "EFI Boot" which apparently is what my windows drive is called.
because of my Mac OSX Raid arrays, i had to install windows by formatting a drive to HFS+ (GUID) pratition table, then repartition to "Free Space" then using an install usb that i made with my macbook air, pull all my other drives and install by selecting the usb drive to boot from.
I went into disk utility to see if I can repair the disk, and disk utility says that the disk has to EFI partition and that we won;t be able to boot from it....which is very confusing because i can boot from it.
Windows 8 apparentl;y uses UEFI from my research....so i'm utterly stumped.
I beleive this is also the cause of my newly purchased graphics card Mac Edition HD 7950, throwing me a BSOD when i select to boot in windows from the boot menu...
Any advice would be greatly appreciated.

Similar Messages

  • Problems installing Windows 7 on the Mac Pro 3,1

    I am having huge issues intalling WIndows 7 on this Mac Pro. I bought 2 new SSDs one for OSX and one for Windows. OSX is running great and i ran bootcamp assistant and selected the second SSD and chose to use intire drive and rebooted to start the installation. Everything starts but installer gives an error saying it could not be installed on that drive. I searched the forums and found that you have to remove all ither drives while installing windows so i rebooted and tried again and everything went fine. once everything was done, all updates installed, bootcanp drivers instelled etc I shutdown and pluged the othe drive back in and windows never booted again. I removed all drives but the windows drive and same thing, no boot. I have erased the drived and gone through the whole process several times with same results everytime.

    Well I finally got it running smooth again, turns out that one of the windows updates changed the way the licensing works and for some odd reason it no longer works on Mac, go firgure lol. I ended up giving my windows 7 license to a friend who just built a PC so it worked fine for him but I am out $139 .
    To get it working again I had to take my Mac Pro to work and let the IT guys install the Enterprise Edition and activate it againist the companies activation server. Works great now but it means I will have to take it to work every 6 months now for activation
    I wish Microsft would stop making things so hard for us Mac guys.

  • Problem install windows on mid 2010 MacBook Pro 13 with 10.9.1

    I run into problem install windows on mid 2010 MacBook Pro 13 with 10.9.1.  Boot Camp Assistant shows error "Can't install the software because it is not currently available from the Software Update server.".  So what is the problem and how can I work around it?  I also tried to only chose "Install Windows 7" option, but it could not recognize my windows dvd (which I created from ISO).  Any help is appreciated.

    I run into problem install windows on mid 2010 MacBook Pro 13 with 10.9.1.  Boot Camp Assistant shows error "Can't install the software because it is not currently available from the Software Update server.".  So what is the problem and how can I work around it?  I also tried to only chose "Install Windows 7" option, but it could not recognize my windows dvd (which I created from ISO).  Any help is appreciated.

  • Trying to install Windows 7 on my mac pro

    Trying to install Windows 7 on my mac pro.  I'm running 10.6, I have boot camp 3.04 and after I partition and install the disc (using 32bit) it restarts automatically and freezes on a black screen.  I have updated my software so what should I do?  Thanks.

    A., Use 64-bit for sure. You have too much RAM and hardware and VRAM
    B. Put Windows 7 Pro 64-bit SP1, you have a dual processor you need Pro.
    C. A dedicated drive for Windows.
    D. At least 50GB
    E. most important, pull all drives out and leave in just the drive Windows will install onto.

  • I install windows 7 on my mac pro. and participate in windows 7 to 50gb 2 disk. but now i cannot enter my mac. only windows is appearing what should i do. when try enter my mac want me to format rest of disk. how can i reinstall my mac

    i install windows 7 on my mac pro. and participate in windows 7 to 50gb 2 disk. but now i cannot enter my mac. only windows is appearing what should i do. when try enter my mac want me to format rest of the disk. how can i reinstall my mac?

    If you use Windows program to partition the Hard Drive, the Apple partition gets destroyed.
    Windows does not understand it is a guest on your Mac, and throws garabge wherever it pleases.

  • Why my Mac Pro hard drive noise and too slow?

    Why my Mac Pro hard drive noise and too slow? Totally 8 gb speed system but now very slow . Please give some suggestions

    Another thing you can do in Lion (and ML) is click on the "Info" button in Disk Utility to get the SMART status of the drive.It's more detailed now than it used to be and it might tell you if something is wrong.
    A lot can go wrong with a hard drive which is why I tend to point people to the downloads section of the following web site:
    http://scsc-online.com
    They have a free hard drive troublleshooting download book there. I reccommend people download that before asking questionis because there are tons of problems that can act like hard drive problems when there's nothing wrong with the system at all. For example, how full is the drive? How many applications are running? What's the status of Spotlight indexing? How many apps are you running? How much memory do you have?
    I could probably think up 20 or 30 more if needed.

  • Having problems installing Windows 7 on my Macbook Pro w/Boot Camp

    Having a problem installing Windows 7 Home Premium (64-Bit) on my Macbook Pro (mid-2010) 13". I use the Boot Camp Assistant, download the necessary drivers and burn them to a disc. I insert my legit Windows 7 install disc, and the process begins but once I get to 'Completing installation', my mac freezes and I have to restart it and delete the partition. This has happened twice. I have contacted Apple and Microsoft and neither of them said that they could help me with the problem so if someone has had a similar issue and found a solution to it, I would really appreciate the help.

    Hi S,
    You may want to post in the Boot Camp forum where more of those experts hang out:  https://discussions.apple.com/community/windows_software/boot_camp

  • Problems installing windows 8 on a mac

    Hi to all,
    I am having problems installing windows 8 on my late 2010 mac book pro. I have created the boot camp partition on the hard drive and have begun the windows 8 install. I have reached the point of where you need to restart the mac and have tried to restart only to find that I can't, so I have pressed the power off button to switch off. Then I press power on and have come to the black screen with the writing no bootable device detected, insert a disc then press any key. I have tried this but nothing happens, I have tried the mac osx disc, and still nothing happens. How do I reboot my mac, anyone????.
    Cheers

    Scurran08 wrote:
    Thanks bob,
    I have read elsewhere on the Internet that windows 8 is supported on bootcamp and that it works.
    Sometimes yes, often no, but it is unsupported officially so you'll have to live with it.

  • Problems installing windows on new retina macbook pro

         Hi i am having problems installing windows on the latest retina macbook pro, I end up getting an error , cant install windows on this GPT partition style. I have tried booting into windows , and EFI, but it all ends up with the same error. Please HELP.

    Did you use Boot Camp Assistant to partition the drive? If you want both Windows and Mac OS X on your Mac that is what you have to do.
    If you only want Windows then you can install it by itself but you have to delete all partitions on the drive and format it NTSF from inside the Windows installer or a third party Disk Management/Partitioning/Formatting program.

  • Raiding Mac Pro Internal Drives

    I have a Mac Pro 2008 edition, I need fast performance of my internal drives. I could use 2 of my 1 TB installed drives and raid them.
    I am not after security of data (I use a drobo for that) but I need fastest performance for video editing. (Encoding) The more I search the web, the more answers I get.
    Hope to get the best advice here in this Forum.
    Thank you
    Dorian

    Then those are not really suitable, they are probably green models.
    Not that hard to move your data, or to invest in enterprise WD Black 2TB or Hitachi Ultrastars.
    The boot drive can be small and lean but fast SSD or WD 10K VelociRaptor. Or 2-3 raided together.
    http://macperformanceguide.com/index_topics.html
    Desktop Hard Drives
    Optimizing your Mac: Fast Hard Drive or SSD
    How to upgrade your system/boot drive
    Buyer's Guide: Hard Drives for Mac Pro
    Mac Boot Drive Dogma
    Upgrading Mac Pro Internal Drives

  • Problem installing vista/xp on a mac pro, installers don't see bootcamp

    hello there!
    recently, a video post production studio i work for purchased a new penryn-based mac pro (2x3.0 ghz, 6gb ram, nvidia 8800gtx).
    yesterday i wanted to install vista onto it to be able to help other windows machines in the studio with 3d studio max rendering jobs (8 cores should do wonders for that), but i ran into a weird obstacle.
    this mac has 5 internal sata drives - one (320gb) for the system, and 4 disks (750gb each) in raid0 set (just a temporary setup until the studio purchases a fiber optic card with external disks). the DVD drive is an IDE one.
    this is the first time i'm setting up windows on a mac, so i could be doing something wrong, even though i doubt it - it seems very straightforward.
    so i created a 32gb partition on the system disk (the only one that's not in raid) using boot camp assistant, and started vista sp1 x64 install (boot camp recognized the install dvd).
    after a reboot, vista started it's setup routine. everything was fine until it reached the part where i should select the destination partition for vista. this is the weird part: vista installer sees all 4 750gig drives from the raid, but it doesn't see my system drive (320gig) which has Macintosh HD and BOOTCAMP partitions on it. vista even sees any usb drives connected.
    doesn't seem logical, as all sata drives are on the same controller (at least that's what leopard system profiler says).
    i thought it had something to do with the fact i'm trying to install 64bit vista, so i tried with windows xp sp2 (x86), but the same thing happened.
    i searched all over, but couldn't find anyone with the same problem.
    any thoughts?
    Message was edited by: recircle_admin

    This thread says it all - and then some
    http://discussions.apple.com/thread.jspa?messageID=7150748&#7150748
    I would pull all the drives except your boot drive. Makes it easier.
    32GB is pretty small actually for Vista x64. And the SP1 patch process can temporarily use another 10GB. Also, you are running off the slow inner tracks of your drive, which is half performance of outer tracks.
    Most people opt for stock 2.8GHz Penryn - not a huge benefit from going with 3GHz, but that is beside the point.
    Always good to disconnect any device during the install except what you have to use (keyboard, mouse) which can interfere.
    You MUST reformat the 32GB from FAT to NTFS before you can install. That is where most people stop. You have to DELETE and then CREATE that BOOTCAMP 32GB (Advanced Options) before you can proceed with installation.
    You don't want 32-bit version if you want to access more than 1.9GB RAM.
    Lots of threads here in BootCamp, in Mac Pro Discussion, and MacRumors Windows on Mac.
    http://forums.macrumors.com/forumdisplay.php?f=86

  • Anyone having problems installing Boot Camp with New Mac Pro 2.8?

    I just get blank screen after it restarts with XP disk. I'm using a vga - dvi adapter with a apple 17" display..
    I've phoned apple and read up on here but nobody seems to know. I just wondered whether my 2008 Mac Pro was faulty...
    Please can you help?
    cheers

    Are you getting a white screen after the Mac reboots? If so, try disconnecting all non-essential USB/FW devices.
    I had the exact same problem and I went through a long, stressful process of elimination to get it working, even to the extent of using my MacBook as an external drive through target disk mode!
    It turned out to be my iMage USB camera. Even after successfully installing Windows I have to disconnect it before using Bootcamp.
    I Hope this helps.

  • Mac Pro internal drive problems

    Hi there,
    I bought a Mac Pro in October last year for business use and it's been going fine until about a month ago.
    I have two internal drives and one of them was making a terrible THUNK! noise, powering down, then trying to start again - you can hear it spinning, not quiet getting there, then spinning again. When this happens, the machine hangs, sometimes until the drive gets back on it's feet, other times I need to do a hard restart. 50% of the time the machine will not start at all. ( gets to gray apple screen and goes nowhere)
    It seems to be the boot drive that the machine shipped with that's causing the problems as Disk Utility keeps finding erros on it. When I repair it, the machine works fine for a while until, when I'm working away, suddenly THUNK! and everything starts over again! Also, my bluetooth mouse and keyboard seems to be palying up too, but I don't know if this is related.
    I'm tearing my hair out and I need to edit some video on it for work soon, but this seems like it's going to be impossible if the drive keeps stopping like this!
    Any advice would be much appreciated!
    David Newbigging
    Mac Pro 2.66   Mac OS X (10.4.8)  

    Definitely get the backups current, an external FW would be nice to have too so you have it off line.
    I zero every drive before using. It is possible that there are bad blocks. Which, according to a Google report, means it is likely to fail anyway. But zero the drive may be enough. Or 7way write erase.
    Or use Windows and the vendor disk utility (which seem to be limited to DOS or Windows, even Vista has one) to recertify the drive.
    I would buy a drive now, and try to get it replaced.
    A severely corrupted directory can cause a drive to sound like it is in the death throes of failing.
    Do you have Disk Warrior 4? have you installed Applejack? used Single User Mode and run fsck to repair the drive?
    And have you already setup a 2nd boot drive? always essential to have an emergency boot drive; a working backup drive; and your main boot drive.
    If a drive is going to fail, make it early on.
    There are tools like Intech Speedtools to test and remap bad blocks. I always test and torture test a drive for a few days before trusting it.

  • I am installing Windows 7 on my macbook pro OSX Mountain Lion and I get an error message:" Your disk could not be partitioned." What does this mean?

    I am installing Windows 7 and I get an error message: "Your disk could not be partitioned. An error ocurred while partitioning the disk". I was using a Windows & Home Premium OEM Software that I purchased from Microsoft. I was given to Windows 100GB to use for Quickbooks pro, Payroll and Publisher. I have the Macbook Pro model No: MD102LL/A. Does anyone knows what happenned or can advice me in what to do? Please help!!!

    amarilysfl wrote:
    "Your disk could not be partitioned. An error occurred while partitioning the disk".
    https://www.apple.com/support/bootcamp/
    If you were using Apple's BootCamp and received this message, quit it and open Disk Uility in your Applicaitons/Utilities folder.
    Select the Macintosh HD partition on the left and select Erase and Erase Free Space > Zero option and let it complete (important) this will check the spare space for bad sectors that can cause issues formatting partitions.
    Once it's completed, try creating a partiton again in BootCamp.
    If that doesn't work, then hold command option r keys down while connected to a fast internet connection, Internet Recovery should load (spinning globe) and then in that Disk Utility, select your entire internal drive and click > First Aid > Repair Disk and Permissions.
    reboot and attempt Bootcamp again.
    If you still get a error, it might be that you have OS X data on the bottom area where BootCamp partition needs to go. This would occur if you had the drive or computer for a long time or wrote a large amount of files to the drive and nearly filling it up and then reduced some, but it left traces in the area BootCamp needs to go.
    To fix this
    BootCamp: "This disc can not be partitioned/impossible to move files."
    How to safely defrag a Mac's hard drive

  • I have installed windows 7 on my mac book, but sound card and cam is not working in windows wht to do?, I have installed windows 7 on my mac book, but sound card and cam is not working in windows wht to do?

    I am using Mac book with windows 7. But my sound card and cam is not working when booted through windows. How can I solve this?
    Thanks

    Assuming that you tried to install Win 7 in bootcamp.
    Power on the machine and press and hold the "option" key when you hear the bong sound.
    Select the Macintosh HD icon and press "return" or just click on the icon.
    Once booted into OS X go to System Preferences and select the Startup Disk icon and configure startup to use the Macintosh HD.

Maybe you are looking for