Problems Pinging things on the LAN
I have a network setup with the following. I have one Linksys E2000, I have set this up as an LAN to LAN AP per the linksys guide http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=3733 It has been set to a static IP address of 192.168.10.77.
I also have a Dlink DIR601 with a static IP address of 192.168.10.1. When I connect to the wireless AP, I cannot see anything else on the network except my device, and the AP. I am unable to get into any of the other devices on the network. All other devices are hard wired to the network ports of the Dlink.
I have gone into the E2000 and also turned off the firewall, but I am unable to get any access to the whole network. What am I missing?
Solved!
Go to Solution.
Sorry, issue fixed. I had acidentally cabled the Wireless AP to the Comcast gateway and not to the Dlink. So of course it would not route.
Similar Messages
-
My iphone 5 won't charge and it's in perfect condition, I dont drop it and it's not cracked. I tried multiple chargers, none of them are damaged and my outlets work with other things so the problem is my phone. What's wrong with it and what should I do? Please help me I need my phone for work.
Make sure there's nothing blocking a contact in the charging port of the phone.
-
I recently purchased a used imac with os 10.6 The problem I am having the admin in accounts in system preferences I would like to change so I can download some items I have tried different things to do this but I cannot figure it out. thanks in advance.
Thats the problem I bought it from a very large thrift store. i went back asked the person where I bought the computer he said we can not give you the password. I thought buying it there was a good idea because not only was it a nice deal but it was like I was maknig a donation. I know that i messed up because i do not have the installation disk. I bought it without thinking. Until recently I was still using an old G4 9.0 os. I guess you can say I have been out of the loop for a while.
-
hello i have a problem with my macbook pro become to slow to write any thing, to do any thing and the fan is always on never stop what can i do?
i already reinstall the software many times and still the same i dont know what is happening is there is somebody who can help me please im will waitingThere are any number of possibilies... you could have problems with runaway applications, causing your machine to overheat and setting the fans off, you could have bad fan sensors, etc.
Open Activity Monitor (Applications>Utilities) and see if you have any apps that may be hogging the CPU. Call back.
Clinton -
Having problems doing an iCloud backup it keeps showing the estimated time thing but the blue load bar hasn't budged in over a half hour is there a way to correct this
You might try a forced shutdown to begin with, hold down the top and home buttons together until the device shuts down, then restart it.
First check that your device is correctly connected to the wifi/internet (settings > wifi)
If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.
If this doesn't help, try turning off some items for back up in a pattern to try to establish if your problem is being caused by specific data on your device.
Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable.
More about iCloud v iTunes Back Up -
Details:
Hi i can not buy any thing from the app store and any thing from in side any games pls fix my problem urgent and as soon
Note this is second email pls answer and fix my problem
<Email Edited by Host>These are public forums, you are not talking to iTunes Support here (most of the people here, including myself, are fellow users) - I've asked the hosts to remove your email address from your post
If you are getting a message to contact iTunes support then you can do so via this page and ask them why the message is appearing (we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
If it's a different problem ... ? -
Stuck in restart mode -- Express Lane advised that I use the Install Disc to fix a problem. I inserted the disc, pressed C as advised and restarted, nothing comes up, the computer just goes on and off - any advise on starting the laptop and getting the disc out?
You insert the disk and restart while holding down the 'c' key until you see the apple and spinning cog. Is that precisely what you did?
-
Error 16 when I update my iPhone 5s showed me stuck on recovery mode and whenever I got error 16 Restore thing is the problem?
Hello Meysam321,
After reviewing your post, I have located an article that can help with your device. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
Resolve iOS update and restore errors - Apple Support
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
Hii frnds,
here is the configuration in my router C1841..for the cisco ipsec remote access vpn..i was able to establish a vpn session properly...but there after i can only reach up to the inside interfaces of the router..but not to the lan devices...
Below is the out put from the router
r1#sh run
Building configuration...
Current configuration : 3488 bytes
! Last configuration change at 20:07:20 UTC Tue Apr 23 2013 by ramana
! NVRAM config last updated at 11:53:16 UTC Sun Apr 21 2013 by ramana
version 15.1
service config
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname r1
boot-start-marker
boot-end-marker
enable secret 5 $1$6RzF$L6.zOaswedwOESNpkY0Gb.
aaa new-model
aaa authentication login local-console local
aaa authentication login userauth local
aaa authorization network groupauth local
aaa session-id common
dot11 syslog
ip source-route
ip cef
ip domain name r1.com
multilink bundle-name authenticated
license udi pid CISCO1841 sn FHK145171DM
username ramana privilege 15 secret 5 $1$UE7J$u9nuCPGaAasL/k7CxtNMj.
username giet privilege 15 secret 5 $1$esE5$FD9vbBwTgHERdRSRod7oD.
redundancy
crypto isakmp policy 10
encr 3des
authentication pre-share
group 2
crypto isakmp client configuration group ra-vpn
key xxxxxx
domain r1.com
pool vpn-pool
acl 150
save-password
include-local-lan
max-users 10
crypto ipsec transform-set my-vpn esp-3des esp-md5-hmac
crypto dynamic-map RA 1
set transform-set my-vpn
reverse-route
crypto map ra-vpn client authentication list userauth
crypto map ra-vpn isakmp authorization list groupauth
crypto map ra-vpn client configuration address respond
crypto map ra-vpn 1 ipsec-isakmp dynamic RA
interface Loopback0
ip address 10.2.2.2 255.255.255.255
interface FastEthernet0/0
bandwidth 8000000
ip address 117.239.xx.xx 255.255.255.240
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
crypto map ra-vpn
interface FastEthernet0/1
description $ES_LAN$
ip address 192.168.10.252 255.255.255.0 secondary
ip address 10.10.10.1 255.255.252.0 secondary
ip address 172.16.0.1 255.255.252.0 secondary
ip address 10.10.7.1 255.255.255.0
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
ip local pool vpn-pool 172.18.1.1 172.18.1.100
ip forward-protocol nd
ip http server
ip http authentication local
no ip http secure-server
ip dns server
ip nat pool INTERNETPOOL 117.239.xx.xx 117.239.xx.xx netmask 255.255.255.240
ip nat inside source list 100 pool INTERNETPOOL overload
ip route 0.0.0.0 0.0.0.0 117.239.xx.xx
access-list 100 permit ip 10.10.7.0 0.0.0.255 any
access-list 100 permit ip 10.10.10.0 0.0.1.255 any
access-list 100 permit ip 172.16.0.0 0.0.3.255 any
access-list 100 permit ip 192.168.10.0 0.0.0.255 any
access-list 150 permit ip 10.10.7.0 0.0.0.255 172.18.0.0 0.0.255.255
access-list 150 permit ip host 10.2.2.2 172.18.1.0 0.0.0.255
access-list 150 permit ip 192.168.10.0 0.0.0.255 172.18.1.0 0.0.0.255
control-plane
line con 0
login authentication local-console
line aux 0
line vty 0 4
login authentication local-console
transport input telnet ssh
scheduler allocate 20000 1000
end
r1>sh ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, + - replicated route
Gateway of last resort is 117.239.xx.xx to network 0.0.0.0
S* 0.0.0.0/0 [1/0] via 117.239.xx.xx
10.0.0.0/8 is variably subnetted, 5 subnets, 3 masks
C 10.2.2.2/32 is directly connected, Loopback0
C 10.10.7.0/24 is directly connected, FastEthernet0/1
L 10.10.7.1/32 is directly connected, FastEthernet0/1
C 10.10.8.0/22 is directly connected, FastEthernet0/1
L 10.10.10.1/32 is directly connected, FastEthernet0/1
117.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C 117.239.xx.xx/28 is directly connected, FastEthernet0/0
L 117.239.xx.xx/32 is directly connected, FastEthernet0/0
172.16.0.0/16 is variably subnetted, 2 subnets, 2 masks
C 172.16.0.0/22 is directly connected, FastEthernet0/1
L 172.16.0.1/32 is directly connected, FastEthernet0/1
172.18.0.0/32 is subnetted, 1 subnets
S 172.18.1.39 [1/0] via 49.206.59.86, FastEthernet0/0
192.168.10.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.168.10.0/24 is directly connected, FastEthernet0/1
L 192.168.10.252/32 is directly connected, FastEthernet0/1
r1#sh crypto isakmp sa
IPv4 Crypto ISAKMP SA
dst src state conn-id status
117.239.xx.xx 49.206.59.86 QM_IDLE 1043 ACTIVE
IPv6 Crypto ISAKMP SA
r1 #sh crypto ipsec sa
interface: FastEthernet0/0
Crypto map tag: giet-vpn, local addr 117.239.xx.xx
protected vrf: (none)
local ident (addr/mask/prot/port): (0.0.0.0/0.0.0.0/0/0)
remote ident (addr/mask/prot/port): (172.18.1.39/255.255.255.255/0/0)
current_peer 49.206.59.86 port 50083
PERMIT, flags={}
#pkts encaps: 0, #pkts encrypt: 0, #pkts digest: 0
#pkts decaps: 2, #pkts decrypt: 2, #pkts verify: 2
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 0, #pkts compr. failed: 0
#pkts not decompressed: 0, #pkts decompress failed: 0
#send errors 0, #recv errors 0
local crypto endpt.: 117.239.xx.xx, remote crypto endpt.: 49.206.xx.xx
path mtu 1500, ip mtu 1500, ip mtu idb FastEthernet0/0
current outbound spi: 0x550E70F9(1427009785)
PFS (Y/N): N, DH group: none
inbound esp sas:
spi: 0x5668C75(90606709)
transform: esp-3des esp-md5-hmac ,
in use settings ={Tunnel UDP-Encaps, }
conn id: 2089, flow_id: FPGA:89, sibling_flags 80000046, crypto map: ra-vpn
sa timing: remaining key lifetime (k/sec): (4550169/3437)
IV size: 8 bytes
replay detection support: Y
Status: ACTIVE
inbound ah sas:
inbound pcp sas:
outbound esp sas:
spi: 0x550E70F9(1427009785)
transform: esp-3des esp-md5-hmac ,
in use settings ={Tunnel UDP-Encaps, }
conn id: 2090, flow_id: FPGA:90, sibling_flags 80000046, crypto map: ra-vpn
sa timing: remaining key lifetime (k/sec): (4550170/3437)
IV size: 8 bytes
replay detection support: Y
Status: ACTIVE
outbound ah sas:
outbound pcp sas:hi Maximilian Schojohann..
First i would like to Thank you for showing interest in solving my issue...After some research i found that desabling the " IP CEF" will solve the issue...when i desable i was able to communicate success fully with the router lan..But when i desable " IP CEF " Router cpu processer goes to 99% and hangs...
In the output of " sh process cpu" it shows 65% of utilization from "IP INPUT"
so plz give me an alternate solution ....thanks in advance.... -
I have an IMAC that uses OSX maverick (10.9..) I cannot connect to the internet because my airport card is turned off. I .have tried repeatedly to turn it on, ,going into assist in diagnostics, as well as the opening wireless menu. I am thinking the card might have died. How can I run diagnostics on the card? How can I fix the problem? Java mama
Click the Wi-Fi icon in your Mac's menu bar.
If it looks like this, it's off:
Click it and select Turn Wi-Fi On.
If it looks like this, it's already on but something else is wrong:
If it looks like something else, describe it or post a screenshot. -
Geting the following error message when trying to download the Lionel Richie album. All songs were downloaded but this one:
There was a problem downloading "Dancing On the Deiling (feat. Rascal Flatts) / Tuskee (Deluxe Edition) / Lionel Richie".
The files seems to be corrupted. To redownload the file, choose "Check for Available Downloads" from the Store menu.Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards. -
Oracle 10G Non-Network install - OEM will not start when on the LAN.
Greetings,
Got through a non-networked 10G Enterprise installation OK; I chose to create the orcl schema, connected to it through various utilities, added new tablespace, and all was well. I also checked my Host Name by pinging it in DOS, it showed me the IP address of the MS loopback adapter which is what I was expecting.
Once I connected the same machine to the LAN (and internet) and re-booted, for some reason the Host Name was now assigned the dynamic IP address of the LAN and not LAN2 (which is the loopback adapter that is assigned a static local IP address). It did this even though I had already added an entry in the /etc/hosts file that explicitly assigns a static IP address to the Host Name (as recommended in the Oracle 10G pre-installation instructions). I also could not get the OEM to launch a webpage, run and connect to the orcl database after the re-boot; I am wondering if this is related to the IP address assigned to Host Name changing; maybe the Oracle agent can no longer resolve the URL for some reason?
In the end I find that the only way to insure I can have a working Oracle environment and be on an active network at the same time, is to bring up the Oracle environment on a standalone system first, and once Oracle is running connect the system to the network. Is there no way to automate this process?
The format of the hosts file entry recommended by the Oracle 10G pre-installation instructions is as follows:
===========================================================
IP_address hostname.domainname hostname
where:
IP_address is the non-routable IP address you entered for the loopback adapter.
hostname is the name of the computer.
domainname is the name of the domain.
For example:
10.10.10.10 mycomputer.mydomain.com mycomputer
==========================================================
In my case since I am not part of a Windows domain (but am part of a Windows Workgroup), I added an entry in the /etc/host file that looks like the following:
# Copyright (c) 1993-1999 Microsoft Corp.
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
127.0.0.1 localhost
192.168.110.250 IBM-6AB1330E158
==> Note that I did not add the domain name to the entry I created since I am not part of a domain, I also used the format I found in the etc/hosts file which is:
IP_address hostname.domainname
- not -
IP_address hostname.domainname hostname
Which is the format recommended in the Oracle 10G pre-installation instructions; this does leave me wondering which format is correct...
Thanks in Advance for any help,
ADG13I have not. I am hoping someone (maybe even from Oracle support) will step up and officially tell us we are either right or wrong in the way we are approaching this. From the research I have done on the internet it sounds like this should work, you should be able to have Oracle starting and running fine whether you boot connected to the LAN or not, assuming you have created the MS loopback adapter, assigned it a static IP, and changed the hostname entry in etc/hosts file as part of the 10G WinXP recommended pre-installation instructions.
And yet I find I have to start Oracle when I am not connected to the LAN or the services will not start correctly. If this is a "feature" then hopefully someone will tell us and maybe give us a workaround or give us an idea if this will be addressed in a future release. Having said that and in fairness to the Oracle product; being a developer I have other products installed on my machine that have special networking setup needs also, and in my case this could be exasperating or even possibly causing this Oracle problem I am having. To be specific I have software for 2 different VPNs installed so I can tunnel into 2 private networks. One of these VPNs require me to make use of a DNS Suffix (as shown below) which might be contributing to my problems, not sure. I also have VMWare installed which uses it own network adapters when it is running, so you can see how things could get a little hairy... at any rate, there is my 2 cents worth (or is that 5 cents? : )
fwiw,
ADG13
C:\Documents and Settings\Administrator>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : IBM-6AB1330E158
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : ibm.com
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Loopback Adapter
Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.110.250
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : ibm.com
Description . . . . . . . . . . . . . : Intel(R) PRO/1000 MT Mobile Connection
Physical Address. . . . . . . . . : 00-11-25-13-96-AF
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.102
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 65.24.7.3
Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2006 3:40:08 AM
Lease Expires . . . . . . . . . . : Thursday, January 12, 2006 3:40:08 AM
Ethernet adapter AGN Virtual Network Adapter:
Connection-specific DNS Suffix . : ibm.com
Description . . . . . . . . . . . : AGN Virtual Network Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-01
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 9.49.217.159
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . :
DHCP Server . . . . . . . . . . . : 9.49.217.159
DNS Servers . . . . . . . . . . . : 9.0.2.1
9.0.3.1
Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2006 8:06:20 AM
Lease Expires . . . . . . . . . . : Monday, January 18, 2038 10:14:07 PM -
I hope I'm submitting this properly, I apologize if this irritates anyone because of improper etiquette. Why do applications (Illustrator, Pages, Mail) launch so slowly with spinning ball (about a minute to 90 seconds) when Mac is connected to our LAN, but when I disconnected Mac from the LAN, those applications launch instantly and function normally? This is a condition which seemed to start just recently and abruptly. These applications reside on, and are launched from the startup drive, not from a network drive. Also, we have a NAS drive on the LAN that we connect to that also takes a minute or two to mount, when it used to (before this problem) mount on the desktop in a matter of about 5 seconds. We have three identical Mac Pros on the LAN, and they all have this problem when launching and using the above mentioned applications. When I physically unplug the network cable from the Mac, all applications launch instantly and function normally. I know very little about networks, so I can't begin to test or change any setting pertaining to our network - if that is where the problem lies. The only recent change to our network situation is that we lost or our internet and phone service due to massive flooding here in Minot, North Dakota (our ISP tells us the communication lines are under water and shorting out). But shouldn't our LAN still function even though we have lost our connection to the outside world? Thanks so much, in advance, for helping me solve this problem. Sheldon.
Hi there.
A slow LAN can have many things so its going slow.
1) is your lan 1gbit speed? (full duplex)
2) are the macs also 1Gbit speed? (full duplex)
3) does your nas has a firewall? (so you can see what the mac asking there)
4) on the macs is the firewall on? (does the programms can pass the fw?)
5) how big is the nas and how many files/dirctorys are on the nas? (big folders speeds down )
many questions, but sometimes there is a solution.
regards tim -
Equium M50 will not recognise the LAN port - error: Network Cable unplugged
I own a Toshiba Equium M50 and have problems with the Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller.
I used to connect via an 'ADDON' Modem/ADSL Switch and had no problems. I then replaced the ADDON with a 'NETGEAR' DG834G ADSL Modem/Router to gain the wireless port, and since then my machine will not recognise the LAN port. <error: Network Cable unplugged>.
I know that the cables are OK as I used them with other laptops and had no trouble. I can also plug in a PCI card to connect without any problems. It looks to me as if the Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller has a problem with the netgear Modem/Router.
Anyone out there with a similar experience and some advice/suggestions?
PLEASEHi
For me it doesnt show like a LAN card problem but your router is a problem.
Check the device manager if the LAN card was properly recognized. If there are no yellow exclamation marks so everything is ok!
You can try to delete the LAN card from the device manager and after new reboot install the LAN driver again.
The issue has stared after installing or connecting the new Netgear modem router.
Therefore I would recommend to checking firstly the settings or to update the firmware on this router.
I have found additionally these useful websites
http://compnetworking.about.com/od/windowsnetworking/f/cableunplugged.htm
http://www.experts-exchange.com/Networking/Broadband/DSL_Cable/Q_20381405.html -
Hp 7525 Photosmart printer won't scan to my PC but will scan to other PCs on the LAN
Hp 7525 Photosmart printer won't scan to my PC but will scan to other PCs on the LAN. I tried to install the printer software but it says it is already installed. Do I have a security setting wrong?
Other PC names show up on the printer's touch screen but not mine. We are all on the same wireless subnet with the printer at a fixed IP address.
I can print from my PC and scan from my PC but I can't scan from the printer touchscreen to my PC.
tcliffHi,
You may have to start from your computer first:
Double click printer icon on desktop,
Select Manage Scan to Computer
Click Enable -
Restart your printer to see, is your machine in the list ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Maybe you are looking for
-
How to print the internal tables in grid format
i have an internal table with 3 fields ITAB1 1 a 2 b 3 c I want to print this in the gird like 1 2 3 a b c Can any one help me how to do it Thank you
-
A couple months ago, I activated photo stream using my apple ID. I was under the impression that all the photos uploaded to my photo stream would only use server space on icloud and wouldn't actually utilize disk space, or at the most, the option was
-
Hi, in pdf documentation "Using Knowledge Management Functionality in Web Dynpro Applications" is mentionated TutWD_KMBrowser_Init.zip file for downloading, but I can't find it following the path suggested. Could you help me? Thanks, Luca Grilli
-
Database Error Dictionary for DB Status Reporting
Hi, Is it possible to query an error dictionary in oracle. My basic object is to identify if an error (probably issue while connecting to a database) is due to network or database etc. Sql err message does give the description but its too large to re
-
IPhone 6 will not update or restore
I am unable to access my phone because it is shutting off on me every time i restart it. I just purchased the phone on 2/13/15, and it's not working. A iTunes Sync cable icon appears. I've tried to restore and update the phone, but no luck. I would