Problems reading xmp data into dng files

Hi there,
I am working on a Mac and have exported files as lossy dng for colour correction externally. They have done the work for LR 5 process (I am using CC) and returned xml files. I cannot seem to read this data into the dng files for further editing in Lightroom. I have tried re-importing them and I have tried reading metadata from file. Any help would be appreciated as I usually simply read the xmp to the original RAW but the RAW files are currently on an external drive in another country!!!
Thanks,
Andy

Moominman wrote:
I am basically trying to export xmp files from a set of low resolution dng files so that I can access my Lightroom edits in the RAW files. I have separated the RAW and dng files in different folders
Hi Andy,
I dunno how best to get extracted xmp files into the raw folders, but if you are comfortable with exiftool, you can use it to extract xmp sidecars from DNG files.
If you want a turn-key solution which does not required you to futz with exiftool, then consider a free plugin I wrote:
robcole.com - xEmP
It will allow you to create xmp sidecars with all your DNG adjustments and metadata (which can then be applied to the non-dng raw files).
However, if you won't need the DNGs in your catalog afterward, then the easiest way is to convert them back to proprietary raw format using this plugin (also free, and I wrote it):
robcole.com - UnDNG
Conceptually, you can think of it as converting the DNGs to proprietary raw format, but note: it doesn't convert anything, it just allows existing raw files that are NOT in the catalog, to replace the DNGs that are in the catalog. All adjustments and metadata and everything else will be preserved (just like when you convert a proprietary raw to DNG format).
Rob

Similar Messages

AE not reading all the XMP data from DNG files

I'm working on a very large time-lapse for a construction company - I have a sunset that is broken between two folders and rendering the folders seperately makes Quicktime unhappy during playback and I get an ugly jump in sunset exposure.
So I combined the two folders in Lightroom (LR) from my RAW files (NEF) and exported the entire sequence as DNG files with simpler numbering. The sequence is about 1560 files and constitutes about 22 GB of data. I created a new LR library from the DNG sequence to make sure it all looked good and it does.
I imported the same DNG sequence into AE, checked a few frames in the preview and sent it out to render. Two thirds of the way through the QT movie, exported in H.264 at 30 fps, I start seeing problems. Huge sections look like the XMP data has not been read, then there's a good section and then bad again. I matched the movie time to preview in AE and indeed saw the same problems in the AE preview. So the problem begain in AE's reading the files from the folder, not in rendering.
I went back to LR for file comparison. There was no problem in LR. All the DNGs look great.
I'm on a MacBookPro Retina with 2.8 GHz Intel processor, 16GB 1600 MHz DDR3 Ram and NVIDIA GeForce GT 650M 1024 MB graphics
I have the standard 69GB cache on an external drive and have 11GB RAM available for AE.
Installed CPUs =8
CPUs reserved for other apps = 2
RAM allocation per background CPU = 1GB
Actual CPUs that will be used = 6
I have the latest AE from the Adobe Cloud, although I haven't done the most recent update yet.
My thought was to break the folder up into smaller segments for rendering, but that's not the problem. I see the XMP hasn't been consistantly read in preview. To me it doesn't make sense that the folder is too large for preview because it's not even rendering it there, just reading the files...?
Any insight, solutions?
Thanks,
Dennis

Moominman wrote:
I am basically trying to export xmp files from a set of low resolution dng files so that I can access my Lightroom edits in the RAW files. I have separated the RAW and dng files in different folders
Hi Andy,
I dunno how best to get extracted xmp files into the raw folders, but if you are comfortable with exiftool, you can use it to extract xmp sidecars from DNG files.
If you want a turn-key solution which does not required you to futz with exiftool, then consider a free plugin I wrote:
robcole.com - xEmP
It will allow you to create xmp sidecars with all your DNG adjustments and metadata (which can then be applied to the non-dng raw files).
However, if you won't need the DNGs in your catalog afterward, then the easiest way is to convert them back to proprietary raw format using this plugin (also free, and I wrote it):
robcole.com - UnDNG
Conceptually, you can think of it as converting the DNGs to proprietary raw format, but note: it doesn't convert anything, it just allows existing raw files that are NOT in the catalog, to replace the DNGs that are in the catalog. All adjustments and metadata and everything else will be preserved (just like when you convert a proprietary raw to DNG format).
Rob

Batch Import .XMP info into DNG Files

I have a few thousand Canon 5D RAW files that have accompanying XMP files created by PS CS2 containing of a lot of metadata that I manually typed in for each photo.
Because of some better ICC profile features in DXO Optics Pro 4.x, I want to batch process my Canon 5D raw files (with XMP EXIF data) by DXO Pro into DNG. My problem is how to batch incorporate the XMP data into the resulting DNG file. It doesn't appear
I found a way I can manually import the data in CS3 for a single photo. However, that's no good for 3000 photos.
Does anyone have a simple batch method that will do what I want? The XMP files are all named the same as the RAW files, so matching up the files is a piece of cake.
Could I create an action that would somehow open the new DXO generated DNG file, and import the XMP file using some type of filename matching process?

Why not simply run the DNG Converter on that folder? It will merge the XMP sidecars into the resultant DNG files.

Problem in Download data into Excel File

Hi Friends,
I have one doubt on WDJ.
         I have got the data from the Back and display the data into Table UI Element. Depending upon po_status equals to OA Pending that time conf_Ship_date Column is Empty. That time we can Select All Checkbox Click on Download Button Excel file is not download. Why it not download? Conf_Ship_date Column is Empty. Conf_Ship_date Column is data available that time data download into Excel File.
My Req: if Conf_Ship_date Column is empty that time click on Download that data will download in to Excel. In Excel Conf_Ship_date Column will display in NULL or 00.00.0000 Like this also.
Code:ExcelEle.setConf_Shp_Date(StockEle.getConf_Shp_Date());
This means I am getting date from PoDetails_OutTab(StockEle)this node and add this date to PoDetails_ExcelData(ExcelEle) this node.Finally the date will available in PoDetails_ExcelData this node. By Using this node I will download data.
How to do this work?
Regards
Vijay

Hi Arun,
For Example in Table 4 rows and 14 columns data is available. Select all check boxes click on download button total 4 rows and 14 columns data is downloaded.
Table 4 rows and 14 columns data is available. But in some cells data not available in that time I m getting null values from ECC System. That time I am not able to download.
In Particularly this problem I am getting only date colums.
So now I have develop this code
public void onActiondownloadToExcel(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActiondownloadToExcel(ServerEvent)
     IPrivatePO_Details_ResultView.IPoDetails_ExcelDataNode ExcelNode = wdContext.nodePoDetails_ExcelData();
     IPrivatePO_Details_ResultView.IPoDetails_ExcelDataElement ExcelEle;
     IPrivatePO_Details_ResultView.IPoDetails_OutTabNode StockNode = wdContext.nodePoDetails_OutTab();
     IPrivatePO_Details_ResultView.IPoDetails_OutTabElement StockEle ;
     for(int i = 0 ;i<StockNode.size();i++)
     StockEle = StockNode.getPoDetails_OutTabElementAt(i);
     if(StockEle.getCheckBox()== true)
     ExcelEle = ExcelNode.createPoDetails_ExcelDataElement();// Create Element
     if(StockEle.getConf_Shp_Date()==null)
     java.sql.Date deliverydate1=new java.sql.Date(0,0,0);
     ExcelEle.setConf_Shp_Date(deliverydate1);
     else
     ExcelEle.setConf_Shp_Date(StockEle.getConf_Shp_Date());
By using this code i have to download total Records but in this Conf_Shp_Date colums i am getting 31-12.1899 this output in Excel. But i need in Excel to print Null or 00.00.0000 like
     ExcelEle.setQuantity(StockEle.getQuantity());
     ExcelEle.setDeliv_Date(StockEle.getDeliv_Date());
     if(StockEle.getExpt_Shp_Date()==null)
     java.sql.Date deliverydate2=new java.sql.Date(0,0,0);
     ExcelEle.setExpt_Shp_Date(deliverydate2);
     else
     ExcelEle.setExpt_Shp_Date(StockEle.getExpt_Shp_Date());
     ExcelEle.setVendor_Material(StockEle.getVendor_Material());
     ExcelNode.addElement(ExcelEle);
     if(ExcelNode.size()>0)
     wdThis.wdGetCO_POPendingController().downloadData(wdContext.nodePoDetails_ExcelData());// This is for Downalod data Method
     wdThis.wdGetCO_POPendingController().DownLoadToExcel();// This is for Open Popup Window
     wdContext.nodePoDetails_ExcelData().invalidate();
     else
     wdComponentAPI.getMessageManager().reportException("Please select any one po item from the table",true);
    //@@end
Regards
Vijay
Edited by: KalluriVijay on May 18, 2010 10:05 AM

Problem splitting XML Data into multiple files

I am sending an XML message through an enterprise message source in enterprise link design studio. While I do so, I am getting a heavy error. This error tells me that my path ist wrong, but I am sure this one is right. Actually everything worked fine till I added an attribute twice in my XML. Since this point enterprise link drives me crazy, I have checked on my XML, it is valid, I have checked on my path, which is also ok.
Anyone some suggestions how to resolve the issue?
The Error code looks the following:
Unable to resolve path "/msg" in message field "host" XML.
XML:
<msg host="192.168.52.129:18342" app="[ZInvestigationProvider#null]" cat="PROCESS" id="org.sopware.services.exampleuri.impl.CepMessage.21" lvl="INFO" text="Investigation_POSSIBILITY BPEL_ID=330024 - ID=1002, RFID=RFID002, NAME=SSN Emmersberger, StartDate=10 CurrentDate=17, expectedShippingDate=13, currentZone=-1, deliveryTimeAgreement=true" tsp="2007-12-05T22:25:36.093Z" xmlns="http://schemas.sbb.org/management/Notification/1.0" />
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x68]
Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Unable to resolve path "/msg" in message field "host" XML.
XML:
<msg host="192.168.52.129:18342" app="[ZInvestigationProvider#null]" cat="PROCESS" id="org.sopware.services.exampleuri.impl.CepMessage.21" lvl="INFO" text="Investigation_POSSIBILITY BPEL_ID=330024 - ID=1002, RFID=RFID002, NAME=SSN Emmersberger, StartDate=10 CurrentDate=17, expectedShippingDate=13, currentZone=-1, deliveryTimeAgreement=true" tsp="2007-12-05T22:25:36.093Z" xmlns="http://schemas.sbb.org/management/Notification/1.0" />
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x68]
Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Update of Plan "NotificationPLAN" failed.
[Oracle BAM Enterprise Link error code: PlanMgr -- 0x1, PlanMgr -- 0xD5]
Regards,
Christoph

Ok what I tried:
- I restarted the BAM Server
- I restarted the Design Studio
- I restarted the oc4j through which I publish the messages through a topic
Result:
Unable to resolve path "/msg" in message field "Data" XML.
XML:
<msg host="192.168.52.129:18342" app="[ZInvestigationProvider#null]" cat="PROCESS" id="org.sopware.services.exampleuri.impl.CepMessage.21" lvl="INFO" text="Investigation_POSSIBILITY BPEL_ID=330024 - ID=1002, RFID=RFID002, NAME=SSN Emmersberger, StartDate=10 CurrentDate=17, expectedShippingDate=13, currentZone=-1, deliveryTimeAgreement=true" tsp="2007-12-05T22:25:36.093Z" xmlns="http://schemas.sbb.org/management/Notification/1.0" />
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x68]
Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Unable to resolve path "/msg" in message field "Data" XML.
XML:
<msg host="192.168.52.129:18342" app="[ZInvestigationProvider#null]" cat="PROCESS" id="org.sopware.services.exampleuri.impl.CepMessage.21" lvl="INFO" text="Investigation_POSSIBILITY BPEL_ID=330024 - ID=1002, RFID=RFID002, NAME=SSN Emmersberger, StartDate=10 CurrentDate=17, expectedShippingDate=13, currentZone=-1, deliveryTimeAgreement=true" tsp="2007-12-05T22:25:36.093Z" xmlns="http://schemas.sbb.org/management/Notification/1.0" />
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x68]
Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Update of Plan "NotificationPLAN" failed.
[Oracle BAM Enterprise Link error code: PlanMgr -- 0x1, PlanMgr -- 0xD5]

Problem in converting table data into CSV file

Hi All,
In my Process i need to convert my error table data into csv file,my data is converted as csv file by using OdisqlUnload function,but the column headers are not converted,i use another procedure for converting column headers but iam getting below error ...
com.sunopsis.sql.SnpsMissingParametersException: Missing parameter string.find, string.find
SQL: import string import java.sql as sql import java.lang as lang import re sourceConnection = odiRef.getJDBCConnection("SRC") output_write=open('C:/Oracle/Middleware/Oracle_ODI2/oracledi/pro/PRO.txt','r+') myStmt = sourceConnection.createStatement() my_query = "select * FROM E$_LOCAL_F0911Z1" my_query=my_query.upper() if string.find(my_query, '*') > 0: myRs = myStmt.executeQuery(my_query) md=myRs.getMetaData() collect=[] i=1 while (i <= md.getColumnCount()): collect.append(md.getColumnName(i)) i += 1 header=','.join(map(string.strip, collect)) elif string.find(my_query,'||') > 0: header = my_query[7:string.find(my_query, 'FROM')].replace("||','||",',') else: header = my_query[7:string.find(my_query, 'FROM')] print header old=output_write.read() output_write.seek(0) output_write.write (header+'\n'+old) sourceConnection.close() output_write.close()
And i used below code for converting.......
import string
import java.sql as sql
import java.lang as lang
import re
sourceConnection = odiRef.getJDBCConnection("SRC")
output_write=open('C:/Oracle/Middleware/Oracle_ODI2/oracledi/pro/PRO.txt','r+')
myStmt = sourceConnection.createStatement()
my_query = "select FROM E$_COMPANY"*
*my_query=my_query.upper()*
*if string.find(my_query, '*') > 0:*
*myRs = myStmt.executeQuery(my_query)*
*md=myRs.getMetaData()*
*collect=[]*
*i=1*
*while (i <= md.getColumnCount()):*
*collect.append(md.getColumnName(i))*
*i += 1*
*header=','.join(map(string.strip, collect))*
*elif string.find(my_query,'||') > 0:*
*header = my_query[7:string.find(my_query, 'FROM')].replace("||','||",',')*
*else:*
*header = my_query[7:string.find(my_query, 'FROM')]*
*print header*
*old=output_write.read()*
*output_write.seek(0)*
*output_write.write (header+'\n'+old)*
*sourceConnection.close()*
*output_write.close()*
Any one can you help regarding this
Edited by: 30021986 on Oct 1, 2012 6:04 PM

This may not be an option for you but in pinch you may want to consider outputing your data to an MS Spreadsheet, then saving it as a CSV. It's somewhat of a cumbersome process, but it will get you by for now.
You will need to change your content type to application/vnd.ms-excel.
<% response.setContentType("application/vnd.ms-excel"); %>

BCP data into a file using Runtime class

Hi,
     I have a problem in using the Runtime class.
I am trying to bcp a table's data into a file.I am working on a Unix environment.
My bcp is not getting completed fully.The total records to be bcped is 1 million,but only one lakh records is getting bcped and then it hangs up..But if i issue the bcp command from my telnet session it is bcping it to the file without any problem.Can anyone help me out on how to overcome this..
Is there anything specific with Runtime class..I am pasting the code that i tried out below.
String l_s_bcpQuery="bcp mubstage.dbo.HousingUnitSampleMarket out /dun/d3nmb0/mariaps/subracheckprototype -c -t~ -Umariaps -Prykwz5ba -SD3NMB_MUB";
try{
Runtime time=Runtime.getRuntime();
Process p=time.exec(l_s_bcpQuery);
p.waitFor();
System.out.println("The exit value is:"+p.exitValue());
}catch(Exception ioe){
     ioe.printStackTrace();
     System.out.println("IOException"+ioe.getMessage());

you might need to capture the stout & sterr from the process. see http://java.sun.com/j2se/1.4.1/docs/api/java/lang/Process.html, or many other similar questions on this forum.
try this:
try{
Runtime time=Runtime.getRuntime();
Process p=time.exec(l_s_bcpQuery);
BufferedReader stout = new BufferedReader(new InputStreamReader(p.getInputStream()));
BufferedReader sterr = new BufferedReader(new InputStreamReader(p.getErrorStream()));
String out = stout.readLine();
String err = sterr.readLine();
while((out != null)||(err != null))
if(out != null)
System.out.println(out);
if(err != null)
System.err.println(err);
out = stout.readLine();
err = sterr.readLine();
int exit_value = p.waitFor();
System.out.println("The exit value is:"+ exit_value);
}catch(Exception ioe){
ioe.printStackTrace();
System.out.println("IOException"+ioe.getMessage());
}

To get the table data into a file in pl/sql developer

Hi
i have table with 90k rows, i want to get the table data into a file like excel....
i executed the select statement it shows only 5k rows because of buffer problem.
can u please help me any alternative way to get the table data into a file.
using cursors like that

Really? excel for 90K rows :)
face/desk/floor/"Hi and sorry neighbours below, it's me again"
Err, I see you point, thanks Dang, I completely missed the 90k recs part, I must be getting old or modern ;)
@Ramanjaneyulu,
can u please help me any alternative way to get the table data into a file.You can always dump a query to a file, check these:
http://tkyte.blogspot.com/2009/10/httpasktomoraclecomtkyteflat.html
How to create Excel file (scroll down when necessary)
http://forums.oracle.com/forums/search.jspa?threadID=&q=export+to+excel&objID=f137&dateRange=all&userID=&numResults=15&rankBy=10001
Depending on your database version ( the result of: select * from v$version; ) you might have some other options.

How to speed up the loading of live data into flash file.

How to speed up the loading of live data into flash file if the swf file size is 1.5 MB. Flash file is using 20 web service connections to load the live data.

Hello,
I am also facing a similar problem wherein the SWF file takes time to load the refreshed data in Infoview i.e. after exporting the xlf file to Business Objects platform. Currently I am using Xcelcius Engage/Enterprise 2008 SP3 Windows (file name: 51038212.ZIP) version 5.3.0.0 build number 12,3,0,670. Also the SWF file is approximately 2MB in size and it uses 42 live office connections.
Please suggest solution as to how to decrease the time it takes to refresh the live office connections.

Unable to write data into excel file when it's close

Hi,
I'm facing this problem and it's a bit weird. I'm using the following method to insert data into excel file. But when excel file is close, it unable to write data into the excel sheet. But it was able to write the data into the excel sheet if i open the excel file when running the program.
Can anyone please tell me what's wrong to the code?
public int updateLog(String sheet, String no, String cpId, String CatId, String rbtCode, String rbt, String rbtName, String artistName, String price, String rbtFileName, String songId, String msg){
        int result = -1;
        try{
            SimpleDateFormat formatter = new SimpleDateFormat("yyyy-MM-dd HH:mm:ss",Locale.ENGLISH);
            String actionDate = formatter.format(new Date());
            rbtName = rbtName.replaceAll("'", "''");
            artistName = artistName.replaceAll("'", "");
            String sql = "insert into [Sheet3$] (Code, CpID, CategoryID, RBTCode, RBT, RBTName, ArtistName, Price, RBTFileName, SongID, UploadStatus, FileUploadedDateTime) ";
            sql = sql + " values ('" + no + "', '" + cpId + "', '" + CatId + "', '" + rbtCode + "', '" + rbt + "', '" + rbtName + "', '" + artistName + "', '" + price + "', '" + rbtFileName + "', '" + songId + "', '" + msg + "', '" + actionDate + "')";
            System.out.println(sql);
            log.writeLog(sql);
            result = stmnt.executeUpdate(sql);
        } catch(Exception e){
            e.printStackTrace();
            log.printStackTrace(e);
        return result;
    public int openConnection(){
        int result = -1;
        try{
            Class.forName(dbDriver);
            c = DriverManager.getConnection(conStr + excelFilePath+";ReadOnly=0;");
            stmnt = c.createStatement();
        } catch(Exception e){
            e.printStackTrace();
            log.printStackTrace(e);
            return -1;
        return 1;
    }Thanks

HI,
i hv a doubt regarding reading / opening of a
password protected Excel file using jxl( java ) .
How to read / open a password protected Excel file
thro Java (jxl ) program .plz let me know some
example also .
Regards,
Ramesh P
845935822cross posting !! answered here
http://forum.java.sun.com/thread.jspa?threadID=710466&messageID=9507085#9507085

Reading decimal data into a string

Hi,
I am having an issue in converting the non char data like decimal into character. Here is my code In the output I see '#' signs where I am supoose to get certain amount values in the decimal format. I require it because I need to download the data into a file. Any thoughts? Rest of the code looks fine. Thanks in advance,
VG
field-symbols: <fs_table> type standard table,
               <fs_wa>,
               <fs_string>.
     CREATE DATA v_dref Type table of (v_tabname).
      assign v_dref->* TO <fs_table>.
      select * from (v_tabname) into table <fs_table>.
      loop at <fs_table> assigning <fs_wa>.
          assign component sy-index of structure <fs_wa> to <fs_string> casting type c.
          if sy-subrc = 0.
            write:/ <fs_string>.
         else.
           write: <fs_string>.
          endif.
        endloop.
output:   10000100000001019999123120090101                                        ############0001

@-Clemens - I tried your code , some problems with decimals values , adds a * in front.
@Vinu - Just some rough modification to the code written by Clemens
PARAMETERS:p_table TYPE tabname.
DATA:wf_maximum TYPE i,
     wf_total_fields TYPE i,
     wi_count TYPE i,
     wf_ltype TYPE c,
     wf_length TYPE i,
     wi_index TYPE i.
DATA:i_comp TYPE cl_abap_structdescr=>component_table,
      wa_comp LIKE LINE OF i_comp,
     wa_fields TYPE abap_compdescr.
DATA:lr_data TYPE REF TO data,
     lr_line TYPE REF TO data,
     wf_data_str TYPE REF TO data,
     wf_type_struct TYPE REF TO cl_abap_structdescr.
FIELD-SYMBOLS:<fs_table> TYPE STANDARD TABLE,
<fs_wa>     TYPE ANY,
<fs_line> TYPE ANY,
<fs_field_s> TYPE ANY.
CREATE DATA lr_data TYPE TABLE OF (p_table).
ASSIGN lr_data->* TO <fs_table>.
CREATE DATA lr_line LIKE LINE OF <fs_table>.
ASSIGN lr_line->* TO <fs_line>.
SELECT * FROM (p_table) INTO TABLE <fs_table> UP TO 20 ROWS.
CLEAR:wf_ltype,wi_count.
DESCRIBE FIELD <fs_line> TYPE       wf_ltype
                           COMPONENTS wi_count.
LOOP AT <fs_table> ASSIGNING <fs_wa>.
AT FIRST.
    wf_maximum = 0.
    wf_total_fields = wi_count.
    WHILE wi_count GT 0.
      wi_index = sy-index.
      ASSIGN COMPONENT wi_index OF STRUCTURE <fs_wa> TO <fs_field_s>.
      IF sy-subrc EQ 0.
        DESCRIBE FIELD <fs_field_s> TYPE          wf_ltype
                                    OUTPUT-LENGTH wf_length.
        IF wf_maximum LT wf_length.
          wf_maximum = wf_length.
        ENDIF.
      ENDIF.
      wi_count = wi_count - 1.
    ENDWHILE.
    CLEAR:wa_comp,i_comp[].
    wa_comp-name = 'FIELD'(005).
    wa_comp-type ?= cl_abap_elemdescr=>get_c( wf_maximum ).
    APPEND wa_comp TO i_comp.
    TRY.
        wf_type_struct =
        cl_abap_structdescr=>create( p_components = i_comp ).
      CATCH cx_sy_struct_creation.
    ENDTRY.
    CREATE DATA: wf_data_str TYPE HANDLE wf_type_struct.
    ASSIGN:wf_data_str->* TO <fs_line>.
ENDAT.
DO.
    ASSIGN COMPONENT sy-index OF STRUCTURE <fs_wa> TO <fs_line>.
    IF sy-subrc = 0.
      WRITE <fs_line>.
    ELSE.
      EXIT.
    ENDIF.
ENDDO.
ENDLOOP.

Java.io.NotSerializableException when overwrite the JTable data into .txt file

hi everyone
this is my first time to get help from sun forums
i had java.io.NotSerializableException: java.lang.reflect.Constructor error when overwrite the JTable data into .txt file.
At the beginning, the code will be generate successfully and the jtable will be showing out with the data that been save in the studio1.txt previously,
but after i edit the data at the JTable, and when i trying to click the save button, the error had been showing out and i cannot succeed to save the JTable with the latest data.
After this error, the code can't be run again and i had to copy the studio1.txt again to let the code run 1 more time.
I hope i can get any solution at here and this will be very useful for me.
the following is my code...some of it i create it with the GUI netbean
but i dunno how to attach my .txt file with this forum
did anyone need the .txt file?
this is the code that suspect maybe some error here
private void jButton1ActionPerformed(java.awt.event.ActionEvent evt) {
String filename = "studio1.txt";
          try {
              FileOutputStream fos = new FileOutputStream(new File(filename));
              ObjectOutputStream oos = new ObjectOutputStream(fos);
               oos.writeObject(jTable2);
               oos.close();
          catch(IOException e) {
               System.out.println("Problem creating table file: " + e);
               return;
          System.out.println("JTable correctly saved to file " + filename);
}the full code will be at the next msg

this is the part 1 of the code
this is the full code...i had /*....*/ some of it to make it easier for reading
package gui;
import javax.swing.*;
import java.io.*;
public class timetables extends javax.swing.JFrame {
    public timetables() {
        initComponents();
    @SuppressWarnings("unchecked")
    private void initComponents() {
        jDialog1 = new javax.swing.JDialog();
        buttonGroup1 = new javax.swing.ButtonGroup();
        buttonGroup2 = new javax.swing.ButtonGroup();
        buttonGroup3 = new javax.swing.ButtonGroup();
        buttonGroup4 = new javax.swing.ButtonGroup();
        jTextField1 = new javax.swing.JTextField();
        jLayeredPane1 = new javax.swing.JLayeredPane();
        jLabel6 = new javax.swing.JLabel();
        jTabbedPane1 = new javax.swing.JTabbedPane();
        jScrollPane3 = new javax.swing.JScrollPane();
        jTable2 = new javax.swing.JTable();
        jScrollPane4 = new javax.swing.JScrollPane();
        jTable3 = new javax.swing.JTable();
        jButton1 = new javax.swing.JButton();
        jButton2 = new javax.swing.JButton();
/*       org.jdesktop.layout.GroupLayout jDialog1Layout = new org.jdesktop.layout.GroupLayout(jDialog1.getContentPane());
        jDialog1.getContentPane().setLayout(jDialog1Layout);
        jDialog1Layout.setHorizontalGroup(
            jDialog1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
            .add(0, 400, Short.MAX_VALUE)
        jDialog1Layout.setVerticalGroup(
            jDialog1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
            .add(0, 300, Short.MAX_VALUE)
        setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
        jLayeredPane1.add(jLabel6, javax.swing.JLayeredPane.DEFAULT_LAYER);
        String filename1 = "studio1.txt";
        try {
               ObjectInputStream ois = new ObjectInputStream(new FileInputStream(filename1));
               jTable2 = (JTable) ois.readObject();
               System.out.println("reading for " + filename1);
          catch(Exception e) {
               System.out.println("Problem reading back table from file: " + filename1);
               return;
        try {
               ObjectInputStream ois = new ObjectInputStream(new FileInputStream(filename1));
               jTable3 = (JTable) ois.readObject();
               System.out.println("reading for " + filename1);
          catch(Exception e) {
               System.out.println("Problem reading back table from file: " + filename1);
               return;
        jTable2.setRowHeight(20);
        jTable3.setRowHeight(20);
        jScrollPane3.setViewportView(jTable2);
        jScrollPane4.setViewportView(jTable3);
        jTable2.getColumnModel().getColumn(4).setResizable(false);
        jTable3.getColumnModel().getColumn(4).setResizable(false);
        jTabbedPane1.addTab("STUDIO 1", jScrollPane3);
        jTabbedPane1.addTab("STUDIO 2", jScrollPane4);
        jTextField1.setText("again n again");
        jLabel6.setText("jLabel5");
        jLabel6.setBounds(0, 0, -1, -1);
        jButton2.setText("jButton2");
        jButton1.setText("jButton1");
        jButton1.addActionListener(new java.awt.event.ActionListener() {
            public void actionPerformed(java.awt.event.ActionEvent evt) {
                jButton1ActionPerformed(evt);

Write the data into a file in 10 ms interval within 10 sec

Hi,
I'm trying to write the data into a file when I press a OK button and the data should write in a file every 10ms interval. After pressing the OK button the process will stop after 10 sec.
I've attached my VI.
Problem is that I'm getting the result every ms. How can I get the data every 10ms? So it'll come 1000 data within 10 sec.
For other calculations purpose I'm using Amplitude and Level Measurements block to get the mean DC voltage, so when I change the Samples to Read and Rates, the process is getting stuck.
Any kind of suggestion is appreciable.
Thanks,
Chotan
Attachments:
DAQ_Time_Checking_For10s_02.vi ‏131 KB

See example attached, if needed
Nghtcwrlr
********************Kudos are alwayzz Welcome !! ******************
Attachments:
Example.vi ‏36 KB

AME hangs at "Reading XMP Data" and won't start encoding

System:
Mac OSX 10.8.5
2 x 3.06 GHz 6-Core Intel Xeon
64 GB RAM
ATI Radeon HD 5870 1024 MB
Premiere 7.2.1 (4)
AME 7.2.0.43
I've created short videos, usually 4 to 12 minutes in length. Edited from Sony XDCAM EX video at 720p60.
I export 5 of these videos to AME using the h.264 codec to try to create mp4 files and cueue them in AME.
Once they are in the Queue of AME, I hit start. AME shows the progress at the bottom and says it is Reading XMP data, but it
then never progresses to the encoding process. I just keep seeing that yellow and grey barber pole progress bar moving, but nothing
ever happens.
I've used this process for months with no problems and now it won't work. My coworkers and I have the same setup and we are each
haveing nothing but problems ever since Premiere and AME went past 7.0.
I saw it mentioned in another question to uncheck "Enable native Premiere Pro sequence import". I tried that yesterday and it worked.
Today it does not.
Please help, this is getting rediculous the amount of problems we are suddenly having with Adobe products and a maxed out Mac machine.

After poking around the internets and reading this thread and others, I did the following. I am not sure WHICH of these steps lead to it working, so I will list all.
- Deleted all contents of "media cache" and "media cache files" directories. I tried hitting the "clean" button (in PPro prefs), but after waiting 5 minutes and the progress bar only getting to like 10%, I just hit "cancel" and deleted the files myself, brute force. Took all of 45 seconds. Then, for good measure, I hit the "clean" button again, and it finished in seconds. I did this for both PPro and AME, and both had identical media settings.
- Restarted AME and trashed prefs (holding "shift" while booting). Because of hitting this error before, I already had "Enable Native PPro import" checkmark ticked. When I trashed prefs, if went back on. For fun, I left it on.
- Searched project drive with my media on it for all ".CFA" files on it (because my media settings generates them next to source media when possible). I deleted.
- Restarted computer.
- Opened Premiere. Opened project. Let it reconnect all media and re-generate all CFA files. When everything was silent (took about 30 mins) I exported to Queue. Before I had experimented with using audio render files. I left that box off this time.
- Used the "metadata" settings in the export queue to NOT have it transfer ANY metadata from the project to the rendered file.
- Queue took a long time to get started, but eventually it worked.
It should be noted that I am dealing with a large project (5,000 RED clips, 10,000 audio files) where almost every clip is a merged clip. There's maybe 10 tracks of audio in every timeline and the final thing was an assembly sequence made up of 10 nested sequences. So... not simple.
My gut is that this is a problem with the audio. I don't know why, but I think it is. My next try was going to be just exporting video, no audio, and then running audio through ProTools via a OMF.
R

How to read the data from Excel file and Store in XML file using java

Hi All,
I got a problem with Excel file.
My problem is how to read the data from Excel file and Store in XML file using java excel api.
For getting the data from Excel file what are all the steps i need to follow to get the correct result.
Any body can send me the code (with java code ,Excel sheet) to this mail id : [email protected]
Thanks & Regards,
Sreenu,
[email protected],
india,

If you want someone to do your work, please have the courtesy to provide payment.
http://www.rentacoder.com

Problems reading xmp data into dng files

Similar Messages

Maybe you are looking for