Problems removing vector values

Hi All,
I�m trying to remove a value from a vector that i have previously created. The problem is that for some reason my code does not do anything as an exception or an error message when i try to remove this value. It seems that is not finding the value inside of the vector.
Below i put a small piece of my code to see:
// It Works fine for me
HttpSession session = request.getSession();
// Its working fine too
// I can print the value
Vector itens = (Vector) session.getAttribute("itens");
// THIS IS THE PROBLEM . IT DOES NOT DO ANYTHING - Always return false or -1
itens.removeElement(Atributo);
// I still have the value into the vector
Can someone help me how to remove a value from vector?
thanks in advance
Fabio

Can someone help me how to remove a value from
vector?The problem is not with the method (removeElement() or remove() are functionnally equivalent). If the remove method returns false, it only means one thing : the element 'Atributo' is not there.
Therefore the problem lies where/how you are actually inserting that element.
Did you debug it by printing out all the values in the vector ?
If you printed all the elements in the Vector and found that value, it only means that you inserted it as a String (i.e "Atributo" instead of Atributo). In that case, try itens.removeElement("Atributo").

Similar Messages

  • How to remove a value from a vector of vectors

    How can I remove a value from a vector inside another vector, say;
    Vector myvector= new Vector();
    Vector data= new Vector();
    myvector.addElement(rs.getString(1));
    myvector.addElement(rs.getString(2));
    myvector.addElement(rs.getString(3));
    data.addElement(myvector);
    I want to get an element in the Vector "myvector" at index 2.

    import java.util.*;
    public class Test {
      public static void main(String args[]) {
        Vector myvector= new Vector();
        Vector data= new Vector();
        myvector.addElement("Zero");
        myvector.addElement("One");
        myvector.addElement("Two");
        data.addElement(myvector);
        System.out.println("main vector initially contains:" + data);
        myvector.remove(1);
        System.out.println("main vector now contains:" + data);
    }Output:
    main vector initially contains:[[Zero, One, Two]]
    main vector now contains:[[Zero, Two]]
    Just to be sure I was correct in the first place. Perhaps you should have done likewise before continuing stick to your guns.

  • How to remove null values from list?

    I had created a list in forms 6i and I am getting list values at run time using add_list_item function. The problem is I am getting null value at end of the list. In the property pallet I kept required yes and set the initial value but it is not removing null value. Can any one help me. Thank you.......

    Hello
    Sorry mis-read question on first reply.
    1. Have you set a default value?
    2. Is this default value still in your list?
    3. What happens if you default the list's value to a value you know exists after you have populated it?
    Cheers
    Q
    Message was edited by:
    Q_STEPHENSON

  • Removing Null values from character string

    Hi All,
    Can i remove NULL values (hexadecimal - 0000) from character string. I am uploading a file from presentation layer (shared server) and getting NULL values in many fields which i want to remove.
    please assist.
    Thanks for you help..
    Regards,
    Mohaiyuddin

    Hi,
    Most likely, nobody needed it, but if anybody in future will need the solution for related problem  - here's solution:
    data: lv_nullchar type xstring value '0'.
    shift lv_xstring right deleting trailing lv_nullchar in byte mode.
    shift lv_xstring left deleting leading lv_nullchar in byte mode.
    This hack deleting null chars in lv_xstring at end file and at begining of file. Works perfect for me, where i also worked with files.

  • Problem removing focused object from a table

    Hi.
    I have a problem removing a component that is focused from a table. The
    whole row is removed except a single component (JSpinner) in one row.
    My table has three columns, the first two are String fields
    (not editable) and the last is a JSpinner. Since there is no
    Default cell renderer or cell editor for JSpinner I had to
    create them.
    So, if no element of the row is focused then calling the function:
    public void clearTable() {
    setVisible(false);
    dataVector.removeAllElements(); // clear data vector
    setVisible(true);
    works just fine
    but if a spinner in a row is focused them that spinner is left alone "floating" on an otherwise empty table.
    Questions:
    1) Any one has an ideia of what might be the problem?
    2) Do I have to play with Focus to solve this? (hate the idea,
    since always been told to avoid messing with focus, because
    of the problems it normally brings)
    Thanks in advance for the help,
    Rgds,
    Jorge

    The problem is that you need to properly stop the editing operation first.if( myTable.isEditing() ) {
        // If you want to throw away any edits use...
        myTable.getCellEditor().cancelCellEditing();
        // If you want to apply any edits, then end use...
        myTable.getCellEditor().stopCellEditing();

  • How to remove default value from table definition?

    Hi,
    running 9.2
    Following problem :
    I need to remove default value from table.
    Example
    CREATE TABLE MY_TABLE(
    NAME VARCHAR2(50) DEFAULT 'NAME',
    AGE NUMBER DEFAULT 0
    Now even when I use MODIFY like
    ALTER TABLE MY_TABLE MODIFY (NAME VARCHAR2(10) );
    The default is still there:
    SELECT DATA_DEFAULT FROM USER_TAB_COLUMNS WHERE TABLE_NAME = 'MY_TABLE';
    Is there any way?
    Thanks

    Thanks,
    found the answer. It is not possible!!!!
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_3001.htm
    Note:
    If a column has a default value, then you can use the DEFAULT clause to change the default to NULL, but you cannot remove the default value completely. That is, if a column has ever had a default value assigned to it, then the DATA_DEFAULT column of the USER_TAB_COLUMNS data dictionary view will always display either a default value or NULL

  • To remove a value from registry while uninstalling the program

    I am creating an installer for my exe developed in Labview.
    I added some value to the registry during first run,
    which i was given to customer. During every time
    program starts it will check for this value in registry.
    My problem is that when i am uninstalling the program
    from add and remove program i want to remove this
     value from registry.How can i do this? 
    Plz some one help me?
    With Regards

    You can use the Labview functions Delete Registry Key and Delete Registry Value if you write your uninstall in Labview.
    - tbob
    Inventor of the WORM Global

  • Can not input data when removed the value for seleciton condition

    Dear Experts,
    We met a very strange issue for the IP.
    We create a aggregation level and relatd query for user to key in data.
    We have a filter in the aggregation level.
    It will set value for A,B,C,D
    When user opent he report, system will require user to key in the value for A,B,C,D.
    Now we found that if we key in value for B, cell is input ready.
    If we removed the value in for the B in the selection condition (I mean the value of B is empty, this means tha all the value of B will display in the report), we can not key in data.
    Could you kindly let me kow the reason?
    Thanks and best regards
    Alex yang

    Dear Experts,
    Many thanks for your information.
    I know the principle for the IP.
    But I think you may misunderstanding this issue due to my incorrect explaination.
    First, we think the aggreagtion level is ok. This is due to that for the B in my example, we set its as column value in the query.
    This is means for each record in the IP query, it has only one B value to reflect it.
    But strange things is that if we set fixed value for B, IP input is ok.
    If we removed fixed value for B, IP function is error.
    Now, we will test if we key in multi value for B whether IP input function is ok or not.
    Any update, I will inform you.
    Thanks and best regards
    Alex yang

  • Hi I am having problems removing mail from trash folder. Can anyone help please

    Hi I am having problems removing mail from trash folder. I can send mails to the folder but cannot delete them permanently from the trash folder. I am using Iphone 3G and anm up to date with OS. Can anyone help please

    Check that there isn't a different Trash folder to the one with the proper Trash symbol on it.
    If you see one in your list of folders rather than a separate one, highlight it, then click on Mailbox...Use this mailbox for...Trash

  • Removing duplicate values from selectOneChoice bound to List Iterator

    I'm trying to remove duplicate values from a selectOneChoice that i have. The component binds back to a List Iterator on the pageDefinition.
    I have a table on a JSF page with 5 columns; the table is bound to a method iterator on the pageDef. Then above the table, there are 5 separate selectOneChoice components each one of which is bound to the result set of the table's iterator. So this means that each selectOneChoice only contains vales corresponding to the columns in the table which it represents.
    The selectOneChoice components are part of a search facility and allow the user to select values from them and restrict the results that are returned. The concept is fine and i works. However if i have repeating values in the selectOneChoice (which is inevitable given its bound to the table column result set), then i need to remove them. I can remove null values or empty strings using expression language in the rendered attribute as shown:
    <af:forEach var="item"
    items="#{bindings.XXXX.items}">
    <af:selectItem label="#{item.label}" value="#{item.label}"
    rendered="#{item.label != ''}"/>
    </af:forEach>
    But i dont know how i can remove duplicate values easily. I know i can programatically do it in a backing bean etc.... but i want to know if there is perhaps some EL that might do it or another setting that ADF gives which can overcome this.
    Any help would be appreciated.
    Kind Regards

    Hi,
    It'll be little difficult removing duplicates and keeping the context as it is with exixting standard functions. Removing duplicates irrespective of context changes, we can do with available functions. Please try with this UDF code which may help you...
    source>sort>UDF-->Target
    execution type of UDF is Allvalues of a context.
    public void UDF(String[] var1, ResultList result, Container container) throws StreamTransformationException{
    ArrayList aList = new ArrayList();
    aList.add(var1(0));
    result.addValue(var1(0));
    for(int i=1; i<var1.length; i++){
    if(aList.contains(var1(i)))
         continue;
    else{
    aList.add(var1(i));
    result.addValue(var1(i));
    Regards,
    Priyanka

  • Remove null values from query

    Hi All;
    Below is my query and the output and i need to remove null values from the output
    Any help regarding same is much appreciated
    Thanks
    ; WITH CTE AS
    select a.opportunityid,a.new_entrypoint_displayname,c.parentcustomerid,c.contactid,c.fullname,a.new_mainprogramme_idname,
    a.new_subprogramme_idname,
    a.owneridname,
    a.new_dateofapplication,count(appt.activityid) as NoOfAppointments,
    ap.scheduledstart,
    ap.scheduleddurationminutes
    from opportunity a
    left join contact c on (c.contactid = a.parentcontactid)
    inner join activitypointer ap on ( ap.regardingobjectid = c.contactid )
    inner join appointment appt on (appt.activityid = ap.ActivityId)
    where
    appt.new_didmeetingtakeplace = 1
    and appt.statecode = 1 and
    (a.SCRIBE_DELETEDON is null and c.SCRIBE_DELETEDON is null and ap.SCRIBE_DELETEDON is null and appt.SCRIBE_DELETEDON is null)
    group by a.opportunityid,a.new_entrypoint_displayname,c.parentcustomerid, c.contactid,c.fullname,a.owneridname,
    a.new_mainprogramme_idname,a.new_subprogramme_idname,
    a.new_dateofapplication,ap.scheduledstart,
    ap.scheduleddurationminutes
    union
    select a.opportunityid,a.new_entrypoint_displayname,c.parentcustomerid,c.contactid,c.fullname,
    a.new_mainprogramme_idname,a.new_subprogramme_idname,a.owneridname,
    a.new_dateofapplication,count(appt.activityid) as NoOfAppointments,
    ap.scheduledstart,
    ap.scheduleddurationminutes
    from opportunity a
    left join contact c on (c.contactid = a.parentcontactid)
    inner join activitypointer ap on (ap.regardingobjectid = a.opportunityid)
    inner join appointment appt on (appt.activityid = ap.ActivityId)
    where
    appt.new_didmeetingtakeplace = 1
    and appt.statecode = 1 and
    (a.SCRIBE_DELETEDON is null and c.SCRIBE_DELETEDON is null and ap.SCRIBE_DELETEDON is null and appt.SCRIBE_DELETEDON is null)
    group by a.opportunityid,a.new_entrypoint_displayname,c.parentcustomerid,c.contactid,a.owneridname,
    a.new_mainprogramme_idname,a.new_subprogramme_idname,
    c.fullname,a.new_dateofapplication,
    ap.scheduledstart,
    ap.scheduleddurationminutes
    CTE2 As
    select opportunityid,parentcustomerid,new_entrypoint_displayname,contactid,fullname,
    new_mainprogramme_idname,new_subprogramme_idname,cte.owneridname,
    ac.new_businessstartdate,new_dateofapplication,(NoOfAppointments),
    case when ac.new_businessstartdate > = CTE.scheduledstart
    then (CTE.scheduleddurationminutes) end as PreStartHours,
    case when ac.new_businessstartdate < CTE.scheduledstart
    then (CTE.scheduleddurationminutes) end as PostStartHours
    pp.new_outputs,
    case when po.new_outputsname = 'Pre Start Assist'
    then 'Yes' else 'No' end as Precheck,
    case when po.new_outputsname = 'Business Assist'
    then 'Yes' else 'No' end as Buscheck
    from CTE
    join account ac on (ac.accountid = CTE.parentcustomerid)
    join dbo.new_programmeoutput as po on (CTE.opportunityid = po.new_relatedopportunity)
    join dbo.new_programmeprofile pp on (
    po.new_mainprogrammeid = pp.new_mainprogrammeid and
    po.new_subprogrammeid = pp.new_subprogrammeid
    and pp.new_claimstartdate = po.new_claimdate
    and pp.new_outputsname = po.new_outputsname)
    where (ac.SCRIBE_DELETEDON is null)
    group by opportunityid,parentcustomerid,new_entrypoint_displayname,contactid,fullname,ac.new_businessstartdate,new_dateofapplication,NoOfAppointments,
    scheduledstart,new_mainprogramme_idname,new_subprogramme_idname,cte.owneridname,scheduleddurationminutes
    select opportunityid,parentcustomerid,new_entrypoint_displayname,contactid,fullname,
    new_mainprogramme_idname,new_subprogramme_idname,cte2.owneridname,
    new_businessstartdate,new_dateofapplication,(NoOfAppointments),
    PreStartHours, PostStartHours,po.new_programmeoutputid,
    case when (new_outputsname) = 'Pre Start Assist'
    then 'Yes' else 'No' end as Precheck,
    case when (new_outputsname) = 'Business Assist'
    then 'Yes' else 'No' end as Buscheck --po.*
    from cte2
    left join dbo.new_programmeoutput as po on (cte2.opportunityid = po.new_relatedopportunity)
    where po.new_claimmonthidname is not null and po.statuscode_displayname = 'claimed'
    group by opportunityid,parentcustomerid,new_entrypoint_displayname,contactid,fullname,
    new_mainprogramme_idname,new_subprogramme_idname,cte2.owneridname,
    new_businessstartdate,new_dateofapplication,(NoOfAppointments),
    PreStartHours, PostStartHours,po.new_programmeoutputid,new_outputsname
    --where new_claimmonthidname is not null --and CTE2.PreStartHours is not null and CTE2.PostStartHours is not null
    Pradnya07

     i need to remove null values from the output
    Hello,
    What exactly do you mean with "remove", to filter the rows out from result set or to replace the null value by an other value e.g. 0? This can be done with the
    ISNULL function:
    ISNULL(case when ac.new_businessstartdate > = CTE.scheduledstart
    then (CTE.scheduleddurationminutes) end, 0) as PreStartHours, ...
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • Facing Problem with passing Values from One report to another

    Hi,
    I am Hemanth, I have developed 2 reports. Firast Report High Level Summary, Secong is detailed. First report is developed using Union(4 union) , I am having 4 columns. The report is generating the data. I have used Navigation option on Client Column to move on to Second report. In Second report with in Filter i am using Prompted option. Due to some problem, the client value from first report is not passing to the second one. The second report is getting generated for all the clients.
    Normally i have used this Navigate option in other reports and that works fine. I have even tested with Union, it works. This time it is giving some trouble.
    Please, let me know whats going wrong.
    Thanks for the help.

    sorry for the late updation.
    My First Report, Summary level is a Pivot Table.
    I tried the same report with Table option, the value is passing correctly.
    Is there a way to get rid of this situation using Pivot table.
    Thanks for your help.
    below is the original request.
    Hi,
    I am Hemanth, I have developed 2 reports. Firast Report High Level Summary, Secong is detailed. First report is developed using Union(4 union) , I am having 4 columns. The report is generating the data. I have used Navigation option on Client Column to move on to Second report. In Second report with in Filter i am using Prompted option. Due to some problem, the client value from first report is not passing to the second one. The second report is getting generated for all the clients.
    Normally i have used this Navigate option in other reports and that works fine. I have even tested with Union, it works. This time it is giving some trouble.
    Please, let me know whats going wrong.
    Thanks for the help.

  • I am facing problem while reading values from properties file ...i am getting null pointer exception earlier i was using jdeveloper10g now i am using 11g

    i am facing problem while reading values from properties file ...i am getting null pointer exception earlier i was using jdeveloper10g now i am using 11g

    hi TimoHahn,
    i am getting following exception in JDeveloper(11g release 2) Studio Edition Version 11.1.2.4.0 but it works perfectly fine in JDeveloper 10.1.2.1.0
    Root cause of ServletException.
    java.lang.NullPointerException
    at java.util.PropertyResourceBundle.handleGetObject(PropertyResourceBundle.java:136)
    at java.util.ResourceBundle.getObject(ResourceBundle.java:368)
    at java.util.ResourceBundle.getString(ResourceBundle.java:334)
    at org.rbi.cefa.master.actionclass.UserAction.execute(UserAction.java:163)
    at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
    at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196)
    at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:432)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
    at java.security.AccessController.doPrivileged(Native Method)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
    at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
    at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
    at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

  • Problem getting parameter  values at the service end point

    I am having problem getting parameter values at the service end point. I created service end point and this method is having 35 parameters and then i created test client file using Sun One Studio 5. but when i run this test client and make a call to service it sends wrong value to first three parameters to the service end point. I tried all the way round but it gave me same sort of problem. I change the order of parameters change the names of parameters but it didn�t work. And then i started chopping of parameter from the left side. And my problem is solved when my parameter list reached to 12 from 35. So is it a bug or some problem with my configuration or some thing else.
    I am using sun one studio 5 with sun one app 7. My service end point does very simple thing. It only takes out put of the parameter to the server log file. And my wsdl file seems all right. There is no conflict with the count and data type of the parameter information it contains.
    �     Service End Point Definition (in EJB)
    public java.lang.String setNewAddress(java.lang.String propertyName, java.lang.String status, java.lang.String PMSCode, java.lang.String streetNumPrefix, int streetStartNum, java.lang.String streetStartNumSuffix, int streetEndNum, java.lang.String streetEndNumSuffix, java.lang.String streetName, java.lang.String streetType, java.lang.String streetSuffix, java.lang.String localityPrefix,java.lang.String localityName, java.lang.String postcode, java.lang.String stateCode, java.lang.String countryCode, java.lang.String description, java.lang.String coordinateAccuracy, int longitude, int latitude, java.lang.String planNumber, java.lang.String lotPrefix, int lotNumber, int siteID, java.lang.String countryName, java.lang.String parishName, java.lang.String section, int portionNum, int crownAllotNum, int titleVol, java.lang.String folio, java.lang.String esa, int aliasID, int aliasTagID,String ID) {
    System.out.println(propertyName);
    System.out.println(PMSCode);
    System.out.println(streetNumPrefix);
    ........ taking printout of all the paramters
    �     This is my WSDL file
    <?xml version="1.0" encoding="UTF-8"?>
    <definitions name="NMService" targetNamespace="urn:NMService/wsdl" xmlns:tns="urn:NMService/wsdl" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">
    <types/>
    <message name="NMServiceServantInterface_setNewAddress">
    <part name="String_1" type="xsd:string"/>
    <part name="String_2" type="xsd:string"/>
    <part name="String_3" type="xsd:string"/>
    <part name="String_4" type="xsd:string"/>
    <part name="int_5" type="xsd:int"/>
    <part name="String_6" type="xsd:string"/>
    <part name="int_7" type="xsd:int"/>
    <part name="String_8" type="xsd:string"/>
    <part name="String_9" type="xsd:string"/>
    <part name="String_10" type="xsd:string"/>
    <part name="String_11" type="xsd:string"/>
    <part name="String_12" type="xsd:string"/>
    <part name="String_13" type="xsd:string"/>
    <part name="String_14" type="xsd:string"/>
    <part name="String_15" type="xsd:string"/>
    <part name="String_16" type="xsd:string"/>
    <part name="String_17" type="xsd:string"/>
    <part name="String_18" type="xsd:string"/>
    <part name="int_19" type="xsd:int"/>
    <part name="int_20" type="xsd:int"/>
    <part name="String_21" type="xsd:string"/>
    <part name="String_22" type="xsd:string"/>
    <part name="int_23" type="xsd:int"/>
    <part name="int_24" type="xsd:int"/>
    <part name="String_25" type="xsd:string"/>
    <part name="String_26" type="xsd:string"/>
    <part name="String_27" type="xsd:string"/>
    <part name="int_28" type="xsd:int"/>
    <part name="int_29" type="xsd:int"/>
    <part name="int_30" type="xsd:int"/>
    <part name="String_31" type="xsd:string"/>
    <part name="String_32" type="xsd:string"/>
    <part name="int_33" type="xsd:int"/>
    <part name="int_34" type="xsd:int"/>
    <part name="String_35" type="xsd:string"/></message>
    <message name="NMServiceServantInterface_setNewAddressResponse">
    <part name="result" type="xsd:string"/></message>
    <portType name="NMServiceServantInterface">
    <operation name="setNewAddress" parameterOrder="String_1 String_2 String_3 String_4 int_5 String_6 int_7 String_8 String_9 String_10 String_11 String_12 String_13 String_14 String_15 String_16 String_17 String_18 int_19 int_20 String_21 String_22 int_23 int_24 String_25 String_26 String_27 int_28 int_29 int_30 String_31 String_32 int_33 int_34 String_35">
    <input message="tns:NMServiceServantInterface_setNewAddress"/>
    <output message="tns:NMServiceServantInterface_setNewAddressResponse"/></operation></portType>
    <binding name="NMServiceServantInterfaceBinding" type="tns:NMServiceServantInterface">
    <operation name="setNewAddress">
    <input>
    <soap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" use="encoded" namespace="urn:NMService/wsdl"/></input>
    <output>
    <soap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" use="encoded" namespace="urn:NMService/wsdl"/></output>
    <soap:operation soapAction=""/></operation>
    <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="rpc"/></binding>
    <service name="NMService">
    <port name="NMServiceServantInterfacePort" binding="tns:NMServiceServantInterfaceBinding">
    <soap:address location="http://localhost:80/NMService/NMService"/></port></service></definitions>
    �     I followed steps given this example. http://developers.sun.com/prodtech/javatools/jsstandard/reference/docs/s1s5/stockapp.html.
    If some one know what is wrong. Is it me or some thing wrong with the method I followed. But I am sure that I followed exactly the same method as it given in examples. So if some one can guide me
    Thanks

    I just found that there is a bug with Sun One Studio 5. It creates faulty JSP file to test the client for the web services. With above problem I tested my web services using different developing environment such as Jdeveloper 10g. I created client stub using wsdl file generated by sun one studio. And made call to my web service and all the parameter reached perfectly at service end point. And then I used stub class created by sun one studio for the client and made the same call. And it also went well. So the problem is with the test application (JSP File) sun one creates for my web service.
    This is the majore problem i faced during the development. But still there is many problem along with this which is not seriouse enough but requires attension. I would like sun developers to make sun one studio IDE simpler and handy .

  • Getting Problem in retrieving values from JTable

    Hi Guys,
    Suppose i clicked in cell in a table to edit it and done some entry in it and without leaving that cell ( means focus is on that cell only) i clicked one button.
    button prints table data on console.
    now problem is the value in focused cell is coming as null or wht i previously return.
    that means unless i m not leaving a cell the Jtable is not taking that value.
    how could i overcome this problem
    thanks in advance

    Use this:table.putClientProperty("terminateEditOnFocusLost", Boolean.TRUE);The editor will be closed as soon as the table loses focus.

Maybe you are looking for