To remove a value from registry while uninstalling the program
I am creating an installer for my exe developed in Labview.
I added some value to the registry during first run,
which i was given to customer. During every time
program starts it will check for this value in registry.
My problem is that when i am uninstalling the program
from add and remove program i want to remove this
value from registry.How can i do this?
Plz some one help me?
With Regards
You can use the Labview functions Delete Registry Key and Delete Registry Value if you write your uninstall in Labview.
- tbob
Inventor of the WORM Global
Similar Messages
-
Removing duplicate values from selectOneChoice bound to List Iterator
I'm trying to remove duplicate values from a selectOneChoice that i have. The component binds back to a List Iterator on the pageDefinition.
I have a table on a JSF page with 5 columns; the table is bound to a method iterator on the pageDef. Then above the table, there are 5 separate selectOneChoice components each one of which is bound to the result set of the table's iterator. So this means that each selectOneChoice only contains vales corresponding to the columns in the table which it represents.
The selectOneChoice components are part of a search facility and allow the user to select values from them and restrict the results that are returned. The concept is fine and i works. However if i have repeating values in the selectOneChoice (which is inevitable given its bound to the table column result set), then i need to remove them. I can remove null values or empty strings using expression language in the rendered attribute as shown:
<af:forEach var="item"
items="#{bindings.XXXX.items}">
<af:selectItem label="#{item.label}" value="#{item.label}"
rendered="#{item.label != ''}"/>
</af:forEach>
But i dont know how i can remove duplicate values easily. I know i can programatically do it in a backing bean etc.... but i want to know if there is perhaps some EL that might do it or another setting that ADF gives which can overcome this.
Any help would be appreciated.
Kind RegardsHi,
It'll be little difficult removing duplicates and keeping the context as it is with exixting standard functions. Removing duplicates irrespective of context changes, we can do with available functions. Please try with this UDF code which may help you...
source>sort>UDF-->Target
execution type of UDF is Allvalues of a context.
public void UDF(String[] var1, ResultList result, Container container) throws StreamTransformationException{
ArrayList aList = new ArrayList();
aList.add(var1(0));
result.addValue(var1(0));
for(int i=1; i<var1.length; i++){
if(aList.contains(var1(i)))
continue;
else{
aList.add(var1(i));
result.addValue(var1(i));
Regards,
Priyanka -
Hi All;
Below is my query and the output and i need to remove null values from the output
Any help regarding same is much appreciated
Thanks
; WITH CTE AS
select a.opportunityid,a.new_entrypoint_displayname,c.parentcustomerid,c.contactid,c.fullname,a.new_mainprogramme_idname,
a.new_subprogramme_idname,
a.owneridname,
a.new_dateofapplication,count(appt.activityid) as NoOfAppointments,
ap.scheduledstart,
ap.scheduleddurationminutes
from opportunity a
left join contact c on (c.contactid = a.parentcontactid)
inner join activitypointer ap on ( ap.regardingobjectid = c.contactid )
inner join appointment appt on (appt.activityid = ap.ActivityId)
where
appt.new_didmeetingtakeplace = 1
and appt.statecode = 1 and
(a.SCRIBE_DELETEDON is null and c.SCRIBE_DELETEDON is null and ap.SCRIBE_DELETEDON is null and appt.SCRIBE_DELETEDON is null)
group by a.opportunityid,a.new_entrypoint_displayname,c.parentcustomerid, c.contactid,c.fullname,a.owneridname,
a.new_mainprogramme_idname,a.new_subprogramme_idname,
a.new_dateofapplication,ap.scheduledstart,
ap.scheduleddurationminutes
union
select a.opportunityid,a.new_entrypoint_displayname,c.parentcustomerid,c.contactid,c.fullname,
a.new_mainprogramme_idname,a.new_subprogramme_idname,a.owneridname,
a.new_dateofapplication,count(appt.activityid) as NoOfAppointments,
ap.scheduledstart,
ap.scheduleddurationminutes
from opportunity a
left join contact c on (c.contactid = a.parentcontactid)
inner join activitypointer ap on (ap.regardingobjectid = a.opportunityid)
inner join appointment appt on (appt.activityid = ap.ActivityId)
where
appt.new_didmeetingtakeplace = 1
and appt.statecode = 1 and
(a.SCRIBE_DELETEDON is null and c.SCRIBE_DELETEDON is null and ap.SCRIBE_DELETEDON is null and appt.SCRIBE_DELETEDON is null)
group by a.opportunityid,a.new_entrypoint_displayname,c.parentcustomerid,c.contactid,a.owneridname,
a.new_mainprogramme_idname,a.new_subprogramme_idname,
c.fullname,a.new_dateofapplication,
ap.scheduledstart,
ap.scheduleddurationminutes
CTE2 As
select opportunityid,parentcustomerid,new_entrypoint_displayname,contactid,fullname,
new_mainprogramme_idname,new_subprogramme_idname,cte.owneridname,
ac.new_businessstartdate,new_dateofapplication,(NoOfAppointments),
case when ac.new_businessstartdate > = CTE.scheduledstart
then (CTE.scheduleddurationminutes) end as PreStartHours,
case when ac.new_businessstartdate < CTE.scheduledstart
then (CTE.scheduleddurationminutes) end as PostStartHours
pp.new_outputs,
case when po.new_outputsname = 'Pre Start Assist'
then 'Yes' else 'No' end as Precheck,
case when po.new_outputsname = 'Business Assist'
then 'Yes' else 'No' end as Buscheck
from CTE
join account ac on (ac.accountid = CTE.parentcustomerid)
join dbo.new_programmeoutput as po on (CTE.opportunityid = po.new_relatedopportunity)
join dbo.new_programmeprofile pp on (
po.new_mainprogrammeid = pp.new_mainprogrammeid and
po.new_subprogrammeid = pp.new_subprogrammeid
and pp.new_claimstartdate = po.new_claimdate
and pp.new_outputsname = po.new_outputsname)
where (ac.SCRIBE_DELETEDON is null)
group by opportunityid,parentcustomerid,new_entrypoint_displayname,contactid,fullname,ac.new_businessstartdate,new_dateofapplication,NoOfAppointments,
scheduledstart,new_mainprogramme_idname,new_subprogramme_idname,cte.owneridname,scheduleddurationminutes
select opportunityid,parentcustomerid,new_entrypoint_displayname,contactid,fullname,
new_mainprogramme_idname,new_subprogramme_idname,cte2.owneridname,
new_businessstartdate,new_dateofapplication,(NoOfAppointments),
PreStartHours, PostStartHours,po.new_programmeoutputid,
case when (new_outputsname) = 'Pre Start Assist'
then 'Yes' else 'No' end as Precheck,
case when (new_outputsname) = 'Business Assist'
then 'Yes' else 'No' end as Buscheck --po.*
from cte2
left join dbo.new_programmeoutput as po on (cte2.opportunityid = po.new_relatedopportunity)
where po.new_claimmonthidname is not null and po.statuscode_displayname = 'claimed'
group by opportunityid,parentcustomerid,new_entrypoint_displayname,contactid,fullname,
new_mainprogramme_idname,new_subprogramme_idname,cte2.owneridname,
new_businessstartdate,new_dateofapplication,(NoOfAppointments),
PreStartHours, PostStartHours,po.new_programmeoutputid,new_outputsname
--where new_claimmonthidname is not null --and CTE2.PreStartHours is not null and CTE2.PostStartHours is not null
Pradnya07i need to remove null values from the output
Hello,
What exactly do you mean with "remove", to filter the rows out from result set or to replace the null value by an other value e.g. 0? This can be done with the
ISNULL function:
ISNULL(case when ac.new_businessstartdate > = CTE.scheduledstart
then (CTE.scheduleddurationminutes) end, 0) as PreStartHours, ...
Olaf Helper
[ Blog] [ Xing] [ MVP] -
Remove Blank Values from Slicer in Power View
Hi all,
I am trying to create a power view report from a power pivot data model. After creating the model when I try to use the slicer in power view I am seeing the Blank record. Then I checked that dimension in model where I don't have any blank value in there.
Also I checked in fact table where it has a relationship with that dimension and I don't see any blank value there as well.
I am currently blocked with this issue. Experts please jump in and give some ideas how to remove blank value from there.
ThanksAs MM-99 already stated correctly, the BLANK-member is created if there is one or more non-matching row in your fact-table that does not exist in the dimension-table
maybe you have some issues with upper and lower case?
or maybe there are some whitespace characters contained in the text?
to identify the issues you may want to create a calcuated column in your fact-table as =RELATED('DimTable'[MyKeyColumn])
then you can filter on that column and see if any blank values appear
hth,
gerhard
Gerhard Brueckl
blogging @ http://blog.gbrueckl.at
working @ http://www.pmOne.com -
How to remove a value from a vector of vectors
How can I remove a value from a vector inside another vector, say;
Vector myvector= new Vector();
Vector data= new Vector();
myvector.addElement(rs.getString(1));
myvector.addElement(rs.getString(2));
myvector.addElement(rs.getString(3));
data.addElement(myvector);
I want to get an element in the Vector "myvector" at index 2.import java.util.*;
public class Test {
public static void main(String args[]) {
Vector myvector= new Vector();
Vector data= new Vector();
myvector.addElement("Zero");
myvector.addElement("One");
myvector.addElement("Two");
data.addElement(myvector);
System.out.println("main vector initially contains:" + data);
myvector.remove(1);
System.out.println("main vector now contains:" + data);
}Output:
main vector initially contains:[[Zero, One, Two]]
main vector now contains:[[Zero, Two]]
Just to be sure I was correct in the first place. Perhaps you should have done likewise before continuing stick to your guns. -
How to remove a member from cluster while CQ (cq5.5) instances are running?
Hello,
I have a query:
how to remove a member from cluster while CQ instances are running? And is there any particular log to check that it got removed?
Thanks in advance..I might be wrong. AFAIK you do not have the option to remove without shutting down and modfying cluster.properties.
However this usecase would be minimal because before going into production you would have verified your architecture. -
How to remove default value from table definition?
Hi,
running 9.2
Following problem :
I need to remove default value from table.
Example
CREATE TABLE MY_TABLE(
NAME VARCHAR2(50) DEFAULT 'NAME',
AGE NUMBER DEFAULT 0
Now even when I use MODIFY like
ALTER TABLE MY_TABLE MODIFY (NAME VARCHAR2(10) );
The default is still there:
SELECT DATA_DEFAULT FROM USER_TAB_COLUMNS WHERE TABLE_NAME = 'MY_TABLE';
Is there any way?
ThanksThanks,
found the answer. It is not possible!!!!
http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_3001.htm
Note:
If a column has a default value, then you can use the DEFAULT clause to change the default to NULL, but you cannot remove the default value completely. That is, if a column has ever had a default value assigned to it, then the DATA_DEFAULT column of the USER_TAB_COLUMNS data dictionary view will always display either a default value or NULL -
Removing a value from an array
I have searched the forums, and found many post about this, but with different variances.
i have an array, where if a user passes an argument that already exists in the array, it will remove that value from the array. when i run the code below i get a boolean exception. i "think" my thinking is correct, but i cannot seem to put it into code terms (HAH! thats a first eh?).
what exactly be the difference to setting the position to 0 or to null?
public void remove(int lessNum) throws NotFoundException {
for( int i=0;i<this.occupied.length;i++) {
if(occupied.equals(lessNum)
occupied[i] = null;
else
throw new NotFoundException();
}//end for
}//end remove
this is the exception i get: boolean cannot be dereferenced
if(occupied[i].equals(lessNum)
^
Thanks,
JHi.
(You have a few typos in your code, but I'm assuming that's because you typed it in again when you sent your posting rather than copying and pasting it. Your compilation error is also not consistent with the code, but I'll take a guess at what is going on)
There are a number of things that are strange about the code example.
1. It looks like your 'occupied' field is a boolean[] (the compilation error indicates that this is the case). That means each element of occupied is a primitive boolean, not a reference. Therefore trying to dereference it makes no sense. This is what the compiler error is telling you. Note that this is not an exception.
2. Now looking at the intent of what I think you're trying to do... I think you are trying to determine if element i of the 'occupied' array is equal to the parameter 'lessNum'. This is nonsensical since the elements of 'occupied' are booleans and lessNum is an int.
3. Finally, trying to set an element of 'occupied' to null, doesn't make sense because the elements of 'occupied' are not references, but primitives.
Regarding your question about the difference between setting something to 0 or null: I assume you come from a C or C++ background where 0 and null are the same thing. In Java, null is not equivalent to 0 but is instead a special value for a variable of reference type that means that the variable is not currently referring to anything. In C and C++ if a pointer has the value 'null' or 'zero' it simply means that any attempt to dereference it will mean an attempt to look for an object at memory address 0 which will usually result in unimaginable horrors (alright, it's not that bad).
Regards,
Lance
Lance Walton - [email protected]
Team In A Box - Software without Tragedy
http://www.teaminabox.co.uk -
How to uninstall the program "Utilities" from the Satellite A210
How can I unistall the program "Utilities" from the Satellite A210. In the control panel I can uninstall the program "Value Added Package" but not "Utilities".
With the A210 I can't work with the FN keys and on a German Toshiba help website I have found this information:
http://aps2.toshiba-tro.de/kb0/TSB0402UR0000R01DE.htm
So I will try this sequence of installation:
- Chipset Utility
- Display Driver
- Toshiba Value Added Package V1.2.40
- Flash Cards Support Utility for Satellite L500 (see this thread why I want it to do):
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=46135&tstart=7
- Toshiba-Utilities V1.0.25.5C
and probably
- Hardware Setup V2.00.09
I hope the FN keys will work after this sequence of installation.
JohnHi again John
So here a little bit theory:
After clean OS you must install all necessary drivers and Toshiba tools and utilities. Just when everything is installed properly you will have well working operating system. Problem is that you cannot install all this in some alphabetical sequence but following right installation order.
I don't have Satellite A210 and cannot offer you exact installation order but it must be something like this one:
-Win7
-chipset driver
-storage manager
-display driver
-sound driver
-modem driver
-LAN/WLAN driver
-supervisor utility
-Synaptics touchpad driver
-Card reader
-Webcam driver
-patches
-configfree
-VAP
-Toshiba hardware setup
-HDMI control
-WLAN driver
-Toshiba assist
Please note
VAP is package with follow applications:
- Toshiba Components Common Driver
- Toshiba Utilities
- Toshiba PC Diagnostic Tool
- Toshiba Power Saver
- Toshiba Button Support
- Toshiba Zooming Utility
- Toshiba Flash cards
As far as I know you cannot remove one single application. What I always do is to remove whole VAP and after notebook restart I start VAP installation again but not as standard installation. I use custom installation. There you can choose which application should be installed and which not.
To be honest I have very good experience with Win7 installation and if everything is installed properly you should be able to use flash cards with FN button. -
I downloaded iMesh and I can't stop it from automatically popping up each time I request a new tab. I have uninstalled the program, but I want to stop it from defaulting as a new tab. I tried uninstalling the add on and plug in, but it is no longer installed as an add-on or plug in. How do I get the "new tab" request to simply open with a blank address in the address box instead of www.imesh.com.
Ok, I finally managed to get rid of it.
First I did the thing with the about:config but I flitered for imesh instead and managed to reset two thing but when I got to the keyword.URL I got the same thing as lolbabe98 did with the "An attempt to change your search engine or homepage was blocked."
Then I did a search on my C: drive for iMesh and discovered some things that hadn't been removed even though I had unistalled both the toolbar and the actual program. After that it worked fine and I now have a regular "untitled" tab when I open a new tab.
One last thing, when I tried to remove some of the files there was one that said it was in use, it was called datamanagerUI or something rather. The only thing I had to do there was to open Task Manager and kill a process called DATAMN~1 and I was able to remove it. Hope this helps. -
Get the values from Day 1 of the Month
Hi Friends,
I have a requirement in which I have to Get the values from Day 1 of the Month.
Ex : If I enter 19 - 07 - 2007.......the report should display Values from 01 - 07 - 2007.
How to Code ?
Please provide the Code.
Thank you.Hello ,
Check this code,
DATA: test_datum1 LIKE sy-datum,
test_datum2 LIKE sy-datum.
WHEN 'TEST1'.
IF i_step = 2.
LOOP AT i_t_var_range INTO loc_var_range
WHERE vnam = 'TEST2'.
test_datum1 = loc_var_range-low.
CONCATENATE test_datum1(6) '01' INTO test_datum2.
CLEAR l_s_range.
l_s_range-low = test_datum2.
l_s_range-high = test_datum1.
l_s_range-sign = 'I'.
l_s_range-opt = 'BT'.
APPEND l_s_range TO e_t_range.
hope it helps,
assign points if useful -
Due to Photoshop Elements 12 Organizer I uninstalled the program. When I re-installed Photoshop Elements 12 on the same computer the "Photoshop Elements 12.0.exe" file is not available. I have tried loading Photoshop Elements 12 from the Adobe web site without success.
The Elements 12 shortcut can't find the Elements12.0.exe file so the program will not load. I can load the editor from its .exe file but not the organizer.
-
Copying the value from a cell in the SQL results?
I run an sql query. The results are returned in a results window. I would like to copy the value from this cell
and paste it into an sql query. How can I do this? I can copy and paste a value from a cell in the view of the data in
a table, but not from the test results. How do I do this? Is there a setting I need to change?I usually do this kind of operations and I've never had any issues, the procedure is as simple as CTRL-C in the results grid, with the required column/columns selected and CTRL-V in the worksheet or anywhere else.
If you still have issues please post your
- SQLDeveloper version
- Java Version
- OS
- Database Version
and if you can a small test case. -
firefox keeps crashing when I try to launch it. I uninstalled the program, but now when I try to download it from your website the download freezes with 1 second left. This has happened several times.
Hello Deb,
Something fishy going on with those particular files. But without looking at them directly I couldn't say what. Usually in a case like this the problem is some of the metadata that is attached to the file. Where did these files come from? A camera, a scanner, the internet?
An explanation about the Watched Folder function: It looks for changes to a folder, not just automatically grabbing whatever files are in it. Generally, you want to select an empty folder as a Watch Folder. Once this has been set up, as you add files to this folder they will be imported into the Organizer. If you start with a folder full of images, those will be ignored, any new items will be added.
-Brett -
Dropdown values are missing while using the function module KCD_EXCEL_OLE_TO_INT_CONVERT
Hi all,
when i am trying to upload the excel template by using the function module " KCD_EXCEL_OLE_TO_INT_CONVERT" to an internal table some field values are missing.
i am using the function module " KCD_EXCEL_OLE_TO_INT_CONVERT" and i am uploading an excel template and downloading that excel data into an internal table but some field values are missing while uploading the excel template and i found that the field which contains the drop down list values those values are missing.
And also when i am uploading the excel template by using the function module" KCD_EXCEL_OLE_TO_INT_CONVERT" when i am coming out of this function module one pop up is coming. how can i avoid this popup, can any one please provide me the solution thanks in advance.
FYI...it is showing the below popup screen ..
Thanks,
Koushikhi Feiyun,
below is the code(highlighted in bold)and after coming out of the function module i am getting popup and also the drop down values are missing.
DATA: ls_control TYPE zsfi_fiupload_control,
ls_header TYPE zsfi_fiupload_header_v13,
ls_item TYPE zsfi_fiupload_item_v13,
ls_trailer TYPE zsfi_fiupload_control,
l_line_count LIKE zsfi_fiupload_control-rec_count,
l_current_curr TYPE kcde_cells-value,
l_current_postdate TYPE kcde_cells-value,
l_current_compcode TYPE kcde_cells-value,
l_currentrow TYPE kcde_cells-row,
l_filename LIKE rlgrap-filename.
DATA: BEGIN OF lt_intern OCCURS 0.
INCLUDE STRUCTURE kcde_cells.
DATA: END OF lt_intern.
DATA: BEGIN OF lt_items OCCURS 0,
a TYPE kcde_cells-value,
b TYPE kcde_cells-value,
c TYPE kcde_cells-value,
d TYPE kcde_cells-value,
e TYPE kcde_cells-value,
f TYPE kcde_cells-value,
g TYPE kcde_cells-value,
h TYPE kcde_cells-value,
i TYPE kcde_cells-value,
j TYPE kcde_cells-value,
k TYPE kcde_cells-value,
l TYPE kcde_cells-value,
m TYPE kcde_cells-value,
n TYPE kcde_cells-value,
o TYPE kcde_cells-value,
p TYPE kcde_cells-value,
q TYPE kcde_cells-value,
r TYPE kcde_cells-value,
s TYPE kcde_cells-value,
t TYPE kcde_cells-value,
u TYPE kcde_cells-value,
v TYPE kcde_cells-value,
w TYPE kcde_cells-value,
x TYPE kcde_cells-value,
y TYPE kcde_cells-value,
z TYPE kcde_cells-value,
aa TYPE kcde_cells-value,
ab TYPE kcde_cells-value,
ac TYPE kcde_cells-value,
ad TYPE kcde_cells-value,
ae TYPE kcde_cells-value,
af TYPE kcde_cells-value,
ag TYPE kcde_cells-value,
ah TYPE kcde_cells-value,
ai TYPE kcde_cells-value,
AJ TYPE KCDE_CELLS-VALUE,
AK TYPE KCDE_CELLS-VALUE,
END OF lt_items.
l_filename = p_flpath.
* the file must be an xls file, not xlsx or comma seperated
IF p_flpath NS '.xls' AND p_flpath NS '.XLS'.
MESSAGE i261(zfi).
g_error = 'X'.
EXIT.
ENDIF.
* upload excel file to a generic table
CALL FUNCTION 'KCD_EXCEL_OLE_TO_INT_CONVERT'
EXPORTING
filename = l_filename
i_begin_col = 1
i_begin_row = 1
i_end_col = 150
i_end_row = 65000
TABLES
intern = lt_intern
EXCEPTIONS
inconsistent_parameters = 1
upload_ole = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* validate that the format is in the restatement format
* this is the only template to have the ledger group in cell G-2
** READ TABLE lt_intern WITH KEY row = '0002' col = '0007'.
** IF sy-subrc <> 0 OR lt_intern-value IS INITIAL.
** MESSAGE i260(zfi).
** g_error = 'X'.
** EXIT.
** ENDIF.
* create control record values
ls_control-rec_type = 'C'.
ls_control-global_id = 'GLU-03000'.
ls_control-local_id = ''.
ls_control-rec_count = ''.
CONCATENATE sy-datum sy-uzeit INTO ls_control-date.
ls_control-version = '12'.
ls_control-email = ''.
ls_control-eor = 'X'.
ls_trailer = ls_control.
* open output file and add the control record
OPEN DATASET p_unixfilename FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
TRANSFER ls_control TO p_unixfilename.
* create header record values, will be transfered to file in the item loop
ls_header-rec_type = 'H'.
READ TABLE lt_intern WITH KEY row = '0017' col = '0003'.
IF sy-subrc = 0.
ls_header-header_txt = lt_intern-value.
ENDIF.
READ TABLE lt_intern WITH key row = '0020' col = '0002'.
IF sy-subrc = 0.
ls_header-comp_code = lt_intern-value.
ENDIF.
************doc date
READ TABLE lt_intern WITH KEY row = '0011' col = '0003'.
IF sy-subrc = 0.
ls_header-pstng_date = lt_intern-value.
ENDIF.
************posting date
ls_header-doc_date = sy-datum.
READ TABLE lt_intern WITH KEY row = '0009' col = '0003'.
IF sy-subrc = 0.
ls_header-doc_type = lt_intern-value.
ENDIF.
READ TABLE lt_intern WITH KEY row = '0014' col = '0003'.
IF sy-subrc = 0.
ls_header-ref_doc_no = lt_intern-value.
ENDIF.
************currency moved to line items
READ TABLE lt_intern WITH KEY row = '0020' col = '0001'.
IF sy-subrc = 0.
ls_header-currency = lt_intern-value.
ENDIF.
ls_header-trans_date = ''.
READ TABLE lt_intern WITH KEY row = '0010' col = '0003'.
IF sy-subrc = 0.
ls_header-period = lt_intern-value.
ENDIF.
READ TABLE lt_intern WITH KEY row = '0006' col = '0003'.
IF sy-subrc = 0.
ls_header-reason_rev = lt_intern-value.
ENDIF.
READ TABLE lt_intern WITH KEY row = '0007' col = '0003'.
IF sy-subrc = 0.
ls_header-rev_date = lt_intern-value.
ENDIF.
* READ TABLE lt_intern WITH KEY row = '0002' col = '0007'.
* IF sy-subrc = 0.
ls_header-ledger_grp = ''.
* ENDIF.
* READ TABLE lt_intern WITH KEY row = '0013' col = '0013'.
* IF sy-subrc = 0.
ls_header-exch_rate = ''.
* ENDIF.
READ TABLE lt_intern WITH KEY row = '0008' col = '0003'.
IF sy-subrc = 0.
ls_header-calc_tax = lt_intern-value.
ENDIF.
ls_header-eor = 'X'.
* loop at the line items and append them to a table with multiple columns
LOOP AT lt_intern WHERE row GE 20.
IF l_currentrow <> lt_intern-row AND l_currentrow IS NOT INITIAL.
APPEND lt_items.
CLEAR lt_items.
ENDIF.
l_currentrow = lt_intern-row.
CASE lt_intern-col.
WHEN '0001'. lt_items-a = lt_intern-value.
WHEN '0002'. lt_items-b = lt_intern-value.
WHEN '0003'. lt_items-c = lt_intern-value.
WHEN '0004'. lt_items-d = lt_intern-value.
WHEN '0005'. lt_items-e = lt_intern-value.
WHEN '0006'. lt_items-f = lt_intern-value.
WHEN '0007'. lt_items-g = lt_intern-value.
WHEN '0008'. lt_items-h = lt_intern-value.
WHEN '0009'. lt_items-i = lt_intern-value.
WHEN '0010'. lt_items-j = lt_intern-value.
WHEN '0011'. lt_items-k = lt_intern-value.
WHEN '0012'. lt_items-l = lt_intern-value.
WHEN '0013'. lt_items-m = lt_intern-value.
WHEN '0014'. lt_items-n = lt_intern-value.
WHEN '0015'. lt_items-o = lt_intern-value.
WHEN '0016'. lt_items-p = lt_intern-value.
WHEN '0017'. lt_items-q = lt_intern-value.
WHEN '0018'. lt_items-r = lt_intern-value.
WHEN '0019'. lt_items-s = lt_intern-value.
WHEN '0020'. lt_items-t = lt_intern-value.
WHEN '0021'. lt_items-u = lt_intern-value.
WHEN '0022'. lt_items-v = lt_intern-value.
WHEN '0023'. lt_items-w = lt_intern-value.
WHEN '0024'. lt_items-x = lt_intern-value.
WHEN '0025'. lt_items-y = lt_intern-value.
WHEN '0026'. lt_items-z = lt_intern-value.
WHEN '0027'. lt_items-aa = lt_intern-value.
WHEN '0028'. lt_items-ab = lt_intern-value.
WHEN '0029'. lt_items-ac = lt_intern-value.
WHEN '0030'. lt_items-ad = lt_intern-value.
WHEN '0031'. lt_items-ae = lt_intern-value.
WHEN '0032'. lt_items-af = lt_intern-value.
WHEN '0033'. lt_items-ag = lt_intern-value.
WHEN '0034'. lt_items-ah = lt_intern-value.
WHEN '0035'. lt_items-ai = lt_intern-value.
when '0036'. lt_items-aj = lt_intern-value.
when '0037'. lt_items-ak = lt_intern-value.
ENDCASE.
ENDLOOP.
APPEND lt_items.
* sort rows by the post date, comp code, curr.
* SORT lt_items BY ah a ai.
* loop at the items, creating a header record if the comp code, curr. or post date changes
LOOP AT lt_items.
ls_item-rec_type = 'I'.
ls_item-post_key = lt_items-c. "lt_items-b.
IF lt_items-c GE '20' AND lt_items-c LE '39'.
ls_item-vendor_no = lt_items-d.
ELSEIF lt_items-c GE '0' AND lt_items-c LE '19'.
ls_item-customer = lt_items-d.
ELSEIF lt_items-c EQ '70' AND lt_items-c EQ '75'.
ls_item-asset = lt_items-d.
ELSE.
ls_item-gl_account = lt_items-d.
ENDIF.
ls_item-asset_type = lt_items-m. "lt_items-l.
ls_item-trans_type = lt_items-n. "lt_items-m.
ls_item-print_flag = ''.
ls_item-item_text = lt_items-j. "lt_items-i.
ls_item-comp_code = lt_items-b. "lt_items-a.
ls_item-bus_area = ''.
ls_item-alloc_nmbr = lt_items-l. "lt_items-k.
ls_item-tax_code = lt_items-q. "lt_items-p.
ls_item-taxjurcode = lt_items-r. "lt_items-q.
ls_item-profit_ctr = lt_items-g. "lt_items-f.
ls_item-costcenter = lt_items-h. "lt_items-g.
ls_item-orderid = lt_items-ac. "lt_items-ab.
ls_item-wbs = lt_items-i. "lt_items-h.
ls_item-trade_id = lt_items-o. "lt_items-n.
ls_item-part_prctr = lt_items-p. "lt_items-o.
ls_item-material = lt_items-t. "lt_items-s.
ls_item-salesorg = lt_items-aa. "lt_items-z.
ls_item-distr_chan = lt_items-ab. "lt_items-aa.
ls_item-pmnttrms = ''.
ls_item-pmtmthd = ''.
ls_item-pmtmthsupl = ''.
ls_item-alt_payee = ''.
REPLACE ALL OCCURRENCES OF '(' IN lt_items-e WITH ''.
REPLACE ALL OCCURRENCES OF ')' IN lt_items-e WITH ''.
ls_item-amt_doccur = lt_items-e. "lt_items-d
REPLACE ALL OCCURRENCES OF '(' IN lt_items-f WITH ''.
REPLACE ALL OCCURRENCES OF ')' IN lt_items-f WITH ''.
ls_item-loc_amt = lt_items-f. "lt_items-e
ls_item-loc = lt_items-k. "lt_items-j.
ls_item-sas_revtype = lt_items-s. "lt_items-r.
ls_item-rev_type = lt_items-u. "lt_items-t.
ls_item-rev_chnl = lt_items-v. "lt_items-u.
ls_item-bill_to = lt_items-x. "lt_items-w.
ls_item-payer = lt_items-z. "lt_items-y.
ls_item-ship_to = lt_items-y.
ls_item-tax_amnt = lt_items-x.
ls_item-func_area = ''.
ls_item-expend_date = lt_items-ae. "lt_items-ad.
ls_item-wtax_code = lt_items-af. "lt_items-ae.
ls_item-wtax_base = lt_items-ag. "lt_items-af.
ls_item-wtax_amount = lt_items-ah. "lt_items-ag.
ls_item-payment_block = ''.
ls_item-grp_amt = ''.
ls_item-anc_amt = ''.
ls_item-permit_payee = ''.
ls_item-value_date = ''.
ls_item-pernr = ''.
ls_item-legacy1 = ''.
ls_item-legacy2 = ''.
ls_item-legacy3 = ''.
ls_item-legacy4 = ''.
ls_item-legacy5 = ''.
ls_item-legacy6 = ''.
ls_item-legacy7 = ''.
ls_item-legacy8 = ''.
ls_item-legacy9 = ''.
ls_item-legacy10 = ''.
ls_item-eor = 'X'.
TRANSLATE lt_items-ai TO UPPER CASE.
TRANSLATE lt_items-b TO UPPER CASE.
TRANSLATE lt_items-a TO UPPER CASE.
TRANSLATE lt_items-aj TO UPPER CASE.
IF l_current_curr <> lt_items-a "lt_items-ai
OR l_current_postdate <> ls_header-pstng_date "lt_items-aj
OR l_current_compcode <> lt_items-b.
l_current_curr = lt_items-a.
l_current_postdate = ls_header-pstng_date. "lt_items-aj.
l_current_compcode = lt_items-b.
ls_header-comp_code = l_current_compcode.
ls_header-currency = l_current_curr.
ls_header-pstng_date = l_current_postdate.
ls_header-doc_date = l_current_postdate.
TRANSFER ls_header TO p_unixfilename.
l_line_count = l_line_count + 1.
ENDIF.
TRANSFER ls_item TO p_unixfilename.
l_line_count = l_line_count + 1.
ENDLOOP.
ls_trailer-rec_type = 'T'.
ls_trailer-rec_count = l_line_count.
TRANSFER ls_trailer TO p_unixfilename.
CLOSE DATASET p_unixfilename.
* change the format to fixed format for the remainder of the load program
p_fixed = 'X'.
p_rstmnt = ''.
Thanks,
Koushik
Maybe you are looking for
-
Replaced internal hard drive, time machine doesn't recognize as same volume
Howdy, The hard drive (call it drive "X") on my iMac (one of the 2005 models) was dying so I had it replaced. I rebuilt the new drive (drive "Y") from my most recent time machine backup (from external drive "A"). I am now having problems with one of
-
My Linksys WRT300N died, after exactly 1 year of service
Had lots of problems with it. I bought it just 13 months ago. Warranty is 12 months. I am glad that it died. I switched my old D-link wireless router back on, and it worked like a charm. Never again Linksys. Last visit to this site. Wish you all good
-
Double-click in Files panel will not open a file
Double-click in Files panel will not open a file. Instead alert message appears (I will translate from Czech): "Design notes are not allowed for this file. If you want to use Design notes...". I do not want use Design notes, I want to open a file fro
-
Unibody Macbook Pro .. Overheating ?
Hello, Folks, today while doing some normal computing stuff such as surfing the net using firefox and using aMSN, iTunes with an average of 50% cpu usage, I found that my computer temp "as shown on iStat" is 72C ! is that overheating ? or is it norma
-
How to create Short Lived process?..can neone pls help...
How to create Short Lived process?..can neone pls help...