Problems setting a Yosemite domain name account for Send only

What do I do in Yosemite Mail so that my DOT MAC account is IMAP, but so that I can also send email from a domain account that is a POP account at GoDaddy?
My Dot Mac / iCloud account is my primary Mail account. I also have a domain name account that I use only for sending mail. The domain name account is a POP account, not an IMAP account. The domain server (not an Apple server) forwards the email to my Dot Mac account as it comes in, but I do NOT sync mail or even pick up mail from the domain name server.
With Yosemite, Apple apparently changed the way it deals with that situation. I say "apparently" because I'm having a hard time getting help on this. Before Yosemite, I had the domain account enabled, but while there was a password for sending there was no password for picking up the domain name mail. Every once in the while over the years that setup would get flaky (as Apple made changes on its end?) but usually it worked.
I continued that setup with Yosemite, but a few months ago I started having problems. My mail worked as normally, but during the night or the morning, many messages would arrive as unread duplicates, and many emails I didn't want deleted were permanently deleted. Oddly, in addition, I had an easy time keeping the setup on my MacAir but I had a hard time keeping it on my Mac Mini, even though both have Yosemite.
I took my MacAir to an Apple genius who said the settings had changed in Yosemite. He somehow reset the account for Send Only by clicking a box. Everything worked fine for a week or so,* But then I could no longer send domain name mail, I couldn't find the setting, and I went to another Genius, who didn't know what I was talking about and who couldn't solve the problem.
I need to be able to send my domain name account without making it an IMAP account, but can't figure out how.
thanks
* In other words, the Dot Mac IMAP worked correctly, the POP messages forwarded correctly to DOT MAC (without any duplication problems), and I was able to send mail from the domain account.

I've not tested it but if you simply leave the incoming mail server field in the Mail account preferences blank for that account blank but set up the outgoing server and do not check "include when automatically checking new mail" you should be able to send but not receive
OR undo the forward that you have set up from #2 to #1 and use both normally
LN

Similar Messages

EmailWriterImpl error : 553 5.5.4 user1 ... Domain name required for sender address user1

hi all, i am trying lc8 with a turnkey+jboss install on a windows2003 box, and getting the error below, where do i need to make the changes to correct this error? TIA 2008-05-15 16:35:00,578 INFO [com.adobe.idp.dsc.provider.service.email.impl.EmailReaderImpl] begins process emails: 2008-05-15 16:35:00,578 INFO [com.adobe.idp.dsc.provider.service.email.impl.EmailReaderImpl] EmailSource is Locked: [email protected] 2008-05-15 16:35:00,593 INFO [com.adobe.idp.dsc.provider.service.email.impl.EmailReaderImpl] EmailSource is Locked: [email protected] 2008-05-15 16:35:00,734 INFO [com.adobe.idp.dsc.provider.service.email.impl.EmailReaderImpl] done process emails: 2008-05-15 16:35:00,750 INFO [com.adobe.idp.dsc.provider.service.email.impl.EmailReaderImpl] unlock EmailSource : [email protected] 2008-05-15 16:40:00,109 INFO [com.adobe.idp.dsc.provider.service.email.impl.EmailReaderImpl] begins process emails: 2008-05-15 16:40:00,125 INFO [com.adobe.idp.dsc.provider.service.email.impl.EmailReaderImpl] EmailSource is Locked: [email protected] 2008-05-15 16:40:00,125 INFO [com.adobe.idp.dsc.provider.service.email.impl.EmailReaderImpl] EmailSource is Locked: [email protected] 2008-05-15 16:40:01,203 INFO [com.adobe.idp.dsc.provider.service.email.impl.EmailReaderImpl] done process emails: 2008-05-15 16:40:01,312 INFO [com.adobe.idp.dsc.provider.service.email.impl.EmailReaderImpl] unlock EmailSource : [email protected] 2008-05-15 16:40:01,609 ERROR [org.jboss.ejb.plugins.LogInterceptor] TransactionRolledbackLocalException in method: public abstract com.adobe.idp.um.api.infomodel.User com.adobe.idp.um.businesslogic.directoryservices.DirectoryServicesManager.getExpandedAuth enticatedUser(java.lang.String,java.lang.String,int) throws com.adobe.idp.common.errors.exception.IDPException,com.adobe.idp.common.errors.exception. IDPSystemException, causedBy: com.adobe.idp.common.errors.exception.IDPSystemException: nullorigin: | [com.adobe.idp.um.businesslogic.directoryservices.DirectoryServicesManagerBean] errorCode:13316 errorCodeHEX:0x3404 message:user_identifier:SuperAdmin domain:abx.xyz.com at com.adobe.idp.um.businesslogic.directoryservices.DirectoryServicesManagerBean.getExpanded AuthenticatedUser(DirectoryServicesManagerBean.java:1181) at sun.reflect.GeneratedMethodAccessor365.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) [...] 2008-05-15 16:40:01,937 INFO [com.adobe.idp.dsc.provider.service.email.impl.EmailWriterImpl] EmailWriterImpl error : 553 5.5.4 <user1>... Domain name required for sender address user1 2008-05-15 16:40:01,937 INFO [STDOUT] javax.mail.MessagingException: 553 5.5.4 <user1>... Domain name required for sender address user1 2008-05-15 16:40:01,937 INFO [STDOUT] at com.sun.mail.smtp.SMTPTransport.issueCommand(SMTPTransport.java:1020) 2008-05-15 16:40:01,937 INFO [STDOUT] at com.sun.mail.smtp.SMTPTransport.mailFrom(SMTPTransport.java:716) 2008-05-15 16:40:01,937 INFO [STDOUT] at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:388) 2008-05-15 16:40:01,937 INFO [STDOUT] at [...] 2008-05-15 16:40:01,953 INFO [STDOUT] at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:529) 2008-05-15 16:40:01,953 ERROR [com.adobe.idp.dsc.provider.service.email.impl.write.EmailResultHandlerImpl] Internal error.

bump...
Anyone got a fix for this? Vacation auto-reply is being bounced by 3rd party relay server due to malformed sender address.

Is there any way to setup a email account for sending only

is there any way to setup a email account for sending only? i have a pop account that i fwd to my google acct, so all my mail is mapi thru google/exchange. i do need this account as a send email address so currently i have entered a wrong password so i do not duplicate my inbox. its annoying as i get the bad reteival popup continuessly. Many email products, like outlook allow you to decide which accounts to download. it should be a simple fix from Apple, but dont think there is any one to talk too about this. other option is to use the gmail app or chrome, but like apple's email better for iphone Any ideas??

Read here:
http://apple.stackexchange.com/questions/26105/iphone-mail-send-only-account

I had no problem setting up my pop mail account for my primary email, but cannot set up a 2nd pop account for my secondary account. I'm using Ipad2. Can you help?

I cannot seem to set up a 2nd pop account on my Ipad2. No problems setting up the primary but the secondary keeps telling me that either username or password is incorrect. Both are correct. It's driving me crazy. Can someone help?
Thanks!

Maybe I'm not following completely, but you can configure email accounts manually, if you want. Just hold down the Option key when you click Continue on the first screen. You can then choose the type of account and set up the servers as you like.
This help page seems to think you can still use POP with Yahoo.
http://help.yahoo.com/kb/index?locale=en_US&page=content&id=SLN4724

Problems setting up a Domain - javax.management.InstanceNotFoundException

I am having problems setting up a Domain. The following steps summarize
what I have done.
1. Created FooDomain in d:/bea/wlserver6.0/config and created
appropriate config.xml, startup scripts, security, etc... (FooDomain
boots ok)
2. Moved console.war to bea/wlserver6.0/config/FooDomain/applications
3. Connected to FooDomain via console (works ok).
4. Defined machine FooMachine (happens to be localhost)
5. Defined new server FooServer (in addition to default myserver) and
assigned it to FooMachine.
6. Created a new directory d:/managedServers/FooServer (note - outside
installation directory)
7. Created directories d:/managedServers/FooServer/logs &
d:/managedServers/FooServer/applications
8. Copied sample startManagedServer.cmd from mydomain to
d:/managedServers/FooServer & modified appropriately.
9. Ran startManagedServer.cmd (Note: I was able to connect to the
Administration Server ok)
The problems are as follows. (From the console - pointing to the
Administration Server for the FooDomain)
1. I am unable to configure a DefaultWebApp_FooServer to be located at
d:/managedServers/FooServer/applications. I get the following exeption:
javax.management.InstanceNotFoundException:
FooDomain:Name=DefaultWebApp_FooServer,Type=WebAppComponent.
2. I get a similar error when trying to set FooServer log locations to
d:/managedServers/FooServer/logs
Any ideas as to why? This then begs the question, what if FooServer was
on a different physical server altogether. How would I define the
location of the DefaultWebApp and logs.
Thanks
jay ()

If you want your application work, think my way. At least, all my teammates have used this method to build their development environment. If you are more interested to debug for Weblogic, contact your support representative. The tools from Administration console look very nice, but not function as you want (e.g., the tool to convert version 5.1 application to version 6, even monitor tools). Administration console is very nice to be used to configue the parameters for a domain, but not so trustful and not for application setup in my own experience and that is why I suggest you use mydomain and DefaultWebApp_MyServer as templates. By the way, I did modify config.xml manually to change the default web application entry, etc, to what I want.
Jay Zammit <[email protected]> wrote:
I did not modify config.xml manually. In fact, I am able to boot both the Administration Server & Managed Server. The problem happens when using the Administration console to assign my logs and Default Applications directory to the d:/managedServers/FooServer/logs, and d:/managedServers/FooServer/applications/DefaultWebApp_FooServer directories. Try it yourself. Go to the Configurer WebApp option and type in a fully qualified directory such as d:/managedServers/FooServer/applications/DefaultWebApp_FooServer
and see if it works on your system.
thanks
jay ()
Xiang Rao wrote:
One suggestion. Use the default domain mydomain as a template. Just make a copy of "mydomain" in folder config and rename the copy to whatever you like. Use some help tools to search all files (non-binary files) in new domain for key word "mydomain" and replace these words with your new domain name. To build an application, just rename the DefaultWebApp_MyServer to what you like and search "DefaultWebApp_MyServer" in all files (non-binary files) in your new domain and replace these words with yournew application name. Note you need to modify the scripts accordingly. Then you can run "startWeblogic" in your new domain directory to start your new domain. Other parameters should be configured by Administration console. If you manually modify configuration files, you could expect some bad news without reason.
Jay Zammit <[email protected]> wrote:
I am having problems setting up a Domain. The following steps summarize
what I have done.
1. Created FooDomain in d:/bea/wlserver6.0/config and created
appropriate config.xml, startup scripts, security, etc... (FooDomain
boots ok)
2. Moved console.war to bea/wlserver6.0/config/FooDomain/applications
3. Connected to FooDomain via console (works ok).
4. Defined machine FooMachine (happens to be localhost)
5. Defined new server FooServer (in addition to default myserver) and
assigned it to FooMachine.
6. Created a new directory d:/managedServers/FooServer (note - outside
installation directory)
7. Created directories d:/managedServers/FooServer/logs &
d:/managedServers/FooServer/applications
8. Copied sample startManagedServer.cmd from mydomain to
d:/managedServers/FooServer & modified appropriately.
9. Ran startManagedServer.cmd (Note: I was able to connect to the
Administration Server ok)
The problems are as follows. (From the console - pointing to the
Administration Server for the FooDomain)
1. I am unable to configure a DefaultWebApp_FooServer to be located at
d:/managedServers/FooServer/applications. I get the following exeption:
javax.management.InstanceNotFoundException:
FooDomain:Name=DefaultWebApp_FooServer,Type=WebAppComponent.
2. I get a similar error when trying to set FooServer log locations to
d:/managedServers/FooServer/logs
Any ideas as to why? This then begs the question, what if FooServer was
on a different physical server altogether. How would I define the
location of the DefaultWebApp and logs.
Thanks
jay ()

I have OSX 10.7 Lion I set up a separate email account for my wife. Now when she tries to enter a website we get the following error message: Java Script: Not Null validator already loaded. The website never opens and it is difficult to get out of:

I have OSX 10.7 Lion. I set up a separate email account for my wife. All of a sudden when she tries to enter and website from email we get the following error message. JavaScript; The notnull validator has already been loaded. From there we can't seem to go any where. When you hit OK it just keeps appearing and the only way to get out of it is to quit Safai. If you try and got directly to Safari you get the same error message and can't go any further. Please help.

What you are experiencing is 100% related to Malware.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Need help setting up a new email account for my wife.

I've been trying to set up a separate email account for my wife with no success. I've gone to Preferences clicked the plus sign, it then asks for full name (my wifes'?) email address (would that be the one I pick for her or my email address?) and password- I'm assuming that's the password I use to get my email. It tells me it's checking connection to mail server and then says login to "POP failed".
Thanks for the help.
Richard

New email accounts should be created and set up first with your email service provider--contact them for information about how to do that. Just making up a new address and typing it into Mail's preferences doesn't create a new email account.
Edited to add: In addition, you probably want to establish a new user account for your wife on your Mac, so that you and she have separate folders and inboxes for your mail, once she has her own account set up. Separate user accounts also mean the two of you can have separate bookmarks on your browsers, separate document folders, and so on--almost as if you each had your own computer.
Message was edited by: Jay Bullock

I started with one itunes account for my iphone and ipad, and now have a second ipad linked to the same itunes. Can I set up a new itunes account for one ipad without losing what has already been downloaded on it?

I started with one itunes account for my iphone and ipad, and now have a second ipad linked to the same itunes. Can I set up a new itunes account for one ipad without losing what has already been downloaded on it? I want to stop my husbands downloads appearing on my ipad, and vice versa.

A much simpler solution would be to go into Settings > Store and turn off Automatic Downloads

HOW TO?: Need help setting up 3 different iCloud accounts for my kids (so each has own iMessanger)using same Apple ID (mine) ....they don't have their own separate email addresses to work from...how do I do this?

Need help setting up 3 different iCloud accounts for my kids (so each has own iMessanger)using same Apple ID (mine) ....they don't have their own separate email addresses to work from...how do I do this?

Any devices connected to the same icloud account can sync all the data on that account. For this reason an icloud account is really for a single user.
On a mac, if each user has their own account, then the itunes for that mac account should be set up to connect to that user's icloud account (System preferences>icloud).

My daughter has been using my iTunes account to buy music and apps. I now want to set up a separate iTunes account for her, with a different login. How can we transfer the music and apps she has already bought to her new iTunes account?

My daughter has been using my iTunes account to buy music and apps. I now want to set up a separate iTunes account for her, with a different login. How can we transfer the music and apps she has already bought to her new iTunes account?

Hello, thank you for your prompt answer. I did have an idea that Home sharing might be the answer but could not quite figure out how to do it. I have enabled home sharing in my iTunes account, put in username and password, clicked on creat etc. But the homs sharing icon doew not appear in the left side of iTunes. So I got stuck. Any further ideas?

I'm trying to set up a iTunes allowance account for my 11 year old daughter, I set up the account but put in the wrong email address, now it's trying to send the verification email to an old addy I no longer have access to. Help.

I'm trying to set up a iTunes allowance account for my 11 year old daughter, I set up the account but put in the wrong email address, now it's trying to send the verification email to an old addy I no longer have access to. Help.
I've tried looking at my own itunes account but I cannot seem to find the allowance account, it says I currently have zero allowance accounts.
All I want to do is change the assigned email address.

Who is the email provider? Not all accounts can be set up as POP3

SAP NetWeaver DNS Domain Name System for SAP?

Hi all,
I need to install SAP Netweaver 7:01 SR1 ABAP Trial Version.
I use Microsoft Windows XP.
During the installation process asks the DNS Domain Name System for SAP.
What should I put in this field?
Following is the result of ipconfig:
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix....:
IP Address.....................................: 10.10.0.10
Subnet Mask..................................: 255.255.255.0
Default Gateway...........................:
The name of my machine is solaris.
In the host file put the following:
10.10.0.10 solaris
I very much appreciate if someone can help me.
Viviane

Hi Viviane,
Please check this thread:
Error:Reverse lookup of address failed:(NW7.01ABAPTrailVersionInstallation)
http://en.wikipedia.org/wiki/Domain_name_system
Hope it helps.
Regards,
Arun

HT1277 having problem setting up a second email account

I am having problems setting up a second email account on my imac. help!

In the Add Account dialog, enter the information, then hold down the option key and click Continue. Finish setting up the account manually.

Can I set up a secondary icloud account for my boss

I would like to set up a secondary icloud account for my boss & I to share a calendar and notes only. It would be set up on both our phones. (mine iPhone4s, his iPhone 5c) I am a bit apprehensive, as I want to make sure he doesn't have access to anything from my personal one, or I to his. Can anyone tell me how this is done?
Thank you.

That's right. You will see both calendars when you open the Calendars app (unless you uncheck one of them so it isn't in view), and both sets of Notes in the notes app (if you tap Accounts, then tap All Notes so they are both in view).
The only thing you'll want to make sure you do is to go to Settings>Mail,Contacts,Calendars>Default Calendar (in the Calendars section) and choose the calendar you want new calendar events to go to by default. If you want them to go to your personal calendar, select your primary iCloud account calendar as your default. You can manually assign new calendar events to either calendar by tapping the Calendar field when you create the event.
Similarly, you'll want to go to Settings>Notes>Default Account and choose the account you want new notes to be created in by default. To create a note in the other account, open the Notes app, tap Accounts, then select the other account prior to creating the note.
Your boss will want to take these same steps in order to ensure that his personal calendar events and notes are created in the correct account too.

TS1307 I am holidaying in Auckland using my daughters orcon internet account for sending mail but it will not send. I am sure I am putting in the correct information but it still says orcon offline. I have spent half an hour with Orcon putting in correct

I am holidaying in Auckland using my daughter's Orcon internet account for sending mail but it will not send. I am sure I am putting in the correct information but it still says mail.orcon.net.nz(Offline). I have spent half an hour with Orcon putting in correct info. They do not know how to help me further and neither does telstra clear, my own internet provider.
Any advice appreciated.

On the Mail menubar > Mailbox, make sure Take all accounts online is selected.

Problems setting a Yosemite domain name account for Send only

Similar Messages

Maybe you are looking for