Problems setting up WiFi in Linux Mint 6
Hey Guys,
I'm running a 32bit version of Linux Mint 6 on my T60. I need a hand setting up my wireless connection. It boggles my mind, I am able to see the wireless network in my 'available networks' option. I am just not able to connect to it. Anyone else have this problem. I know my Atheros wireless device has caused problems for others...
Thanks
T60w 8743-CTO Linux Mint 6, M55 8808-94u XP
Also check whether your wireless router has some security keys like WEP or WPA-PSK, then set that too in your system....
Y410-160GB HDD,T5550,2GB RAM
Ubuntu 9.04 -Gnome, Win Vista(not used much) Ubuntu rocks...
Final Year BTech(CSE) Student
Similar Messages
-
Problems setting up WIFI printing on Mavericks HPDeskjet3050A
I have an HP Deskjet 3050A J611n I can get it to print via USB but wifi is problematic I have had it working a couple of time but wehen I try to reuse it at a later time printer can not be found I am creating my wifi through ethernet to my Time Capsule . I have removed and inserted the printer several times through system prefs the original settings that worked are on my iMac which is currenty been repaired (Graphics issues); so I am using a white macbook I have managed to print off on wifi once I think with this plus do I need to be connected to the HP set up on the wifi all the time to print since this then means I am not connected wirelessly to my normal network? I have been confused by the whole issue is there an easy way to set this up? What information do I need to give it to make it work including airprint? I am so tempted to just run it through the USB port on the time capsule but this is not really how it should function been a wifi printer ! I assume it needs no usb connection to be wirless .
Does anyone have experience with this printer & Mavericks I have my MAC Hardware address my IP Address .I do not know what the network name SSID is or is that simple the name of my network that Time capsule is running?
I have printed off the Printer status report , Wirless Network Test Results what am I missing .
I have tried to seek out the problem in airport utility but I dont think this is it .I have tried adding printers multiple time throus system prefs & HP utility I am chasing my tail here.Also check whether your wireless router has some security keys like WEP or WPA-PSK, then set that too in your system....
Y410-160GB HDD,T5550,2GB RAM
Ubuntu 9.04 -Gnome, Win Vista(not used much) Ubuntu rocks...
Final Year BTech(CSE) Student -
Problems setting up WiFi account
I have just had a new broadband service activated and I am trying to set up the 'out and about' wifi and activate my router accordingly, but sadly cannot get past the first step.
On the very first page it asks me to log in using my email and password. My BT account is set up with my yahoo email address (NOT a BT one) but if I try logging in to the set up using that, it tells me it has to be a BT email address. So, I have activated a BT email address and have tried to log in with that, but it tells me my username is an invalid email address. The email address is valid, because I have logged into BT Yahoo and have received and sent email using that email address, yet it still tells me:
Username is an invalid e-mail address.
Any help would be appreciated. Thanks.
Solved!
Go to Solution.You should have received a btinternet email address when you signed up to bt and need this to sign in to the btwifi connection. If you were only activated today it can take a few days for your address to become active
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
Problems setting up wifi with my chromebook
I have just started setting my HP LaserJet 100 colour MFP M175nw printer up with my chromebook and can not get the wireless conection set up at all. All information I find is for all other types e.g window 7, Mac etc. but nothing for a chromebook. PLEASE can you help me as I am unable to work untill I can sort it out.
Many Thank
SilverRoseJewlsHi SilverRoseJewls,
Thank you for joining the HP Support community. I understand that you would like to setup your Laserjet 100 color MFP M175nw printer to be able to use it with your Chromebook.
Chromebooks don't use full feature drivers due to its design. Please use the printer's wireless direct feature so you can connect to the printer from your Chromebook. Once you have connected to the printer's wireless direct network you can follow the steps in Jon-W's post to connect the printer to your home wireless network.
Once the printer is setup wirelessly you can then setup Google Cloud print so you are able to print from your Chromebook. I have included a document on how to set this up.
HP Support forums post by Jon-W
Using Google Cloud Print with your HP Printer
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP -
I am using firefox 24
No virtually box. I do not have problem with firefox when I access it locally. But once I remote from my macbook to my linux mint15 box, firefox open but hangs. I can see the tool bar, but I can click on any sites because it is frozen. I did not have the problem before I upraded from linux mint 14 to 15
-
Video problem with Linux Mint 17 CInnamon on new Z70-80 laptop
I read that Lenovo has pretty good hardware support for Linux, so I bought a Lenovo Z70-80 laptop and installed Mint 17 Cinnamon on it. Mint runs without errors, but the video looks like it is underwater or hot oil. Text is hard to read with whole display fuzzy and jittery. Clearly the video driver loaded has problems. On boot up, the LM logo appears rock-solid, without any problems, but once mdm runs, video looks distorted and jittery. Changing resolutions has no effect on the problem.
Identified video hardware says Intel integrated:
lspci -nn |grep VGA
VGA compatible controller [0300]: Intel Corporation Broadwell-U Integrated Graphics [8086:1616] (rev 09)
But laptop has NVIDIA GEFORCE sticker on it, so perhaps it is running switchable graphics, or that was the design for Windows 8 that came installed on it. I installed bumblebee and rebooted but that had no effect. /# find ./ *NVIDIA* returned nothing, but if Linux doesn't know about the GEFORCE hardware, I don't know how Nouveau is supposed to be made to work.
I also went into the BIOS Configuration / Graphic Device Setting and changed it from the default [Discrete] to [UMA only] to use only the integrated graphic controller, but that also had no effect on the problem.
Not sure what to do next. Could use some help.
Thanks,
Lee
Fairfax, VA USAI experienced the same thing.Add "nomodeset xforcevesa" to the grub settings to start linux mint nicely, without the watery/oily jittery screen.So have a look at the following (copy paste in the address line of your brouwser): http://forums.linuxmint.com/viewtopic.php?t=122257and read the section after; If you can't boot successfully after installing Linux Mint. When this works (it worked for me) see:http://forums.linuxmint.com/viewtopic.php?f=46&t=140689to make the setting permanent in grub.I changed the line in grub to:GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset xforcevesa"(don't forget the 'sudo update-grub' command) Next steps to take is to get the proper drivers for the Intel graphics card. (Not covered here. Maybe someone can help on this...). Cheers,Ronald
-
i have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me???
If Join was on then your home wi-fi must be set to Non-Broadcast. If you did not set this up (maybe your provider did) then you will need to find the Network Name they used, and any password they used. The SSID is Security Set ID and to see more try http://en.wikipedia.org/wiki/SSID . Basically it is the name used to identify your router/network. A lot of times the installer will leave it set as LinkSys, or Broadcom or whatever the manufacturer set it as for default. Your best bet is to get whoever installed it to walk you through how they set it up, giving you id's and passwords so you can get in. HOWEVER, if you are not comfortable with this (if you set security wrong, etc.) you would be well ahead of the game to hire a local computer tech (networking) to get this working for you. You can also contact the vendor of your router and get help (if it is still in warranty), or at least get copies of the manuals as pdf files. Sorry I can't give you more help, I hope this gives you an idea where to go from here to find more.
-
Hi,i am running linux mint.I tried to change the firefox folder from the file system with a new firefox folder cause i had a problem with one extension(download statusbar).So,after that i have problem,firefox ask me about profile and after some tests about it from me,firefox always says"this profile its allready in use,make a new profile or rename one profile".I don't know anything about profiles,first time i see that i can make a profile it's now.
A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, maybe after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
See [[Firewalls]] and http://kb.mozillazine.org/Firewalls
http://kb.mozillazine.org/Browser_will_not_start_up -
Windows 8.1 will not boot after setting up dual-boot with Linux Mint 17.1 Cinnamon
In which forum should I ask this question?
After installing Linux Mint onto a partition of my hard drive, Windows 8.1 is listed a choice to boot into after restarting my computer, but will not boot up. It suggests a boot repair and to obtain Windows 8.1 from my distributor. I have seen on other forums
that this has not worked, and I was wondering if anyone here had any suggestions for how to proceed.
Thanks in advance.You can try them over here.
http://answers.microsoft.com/en-us/windows/forum/windows8_1?tab=Threads
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
EFI partition deleted after removal of dual boot of OSX10.8 and Ubuntu/Linux Mint - using rEFIt
so, i recently installed ubuntu to check out the advances in the linux world since i last looked into them 10+ years ago... very impressed, but when i tried to delete ubuntu and remove the various partitions (which i was able to do just fine using gparted) reFIT still displayed the **** linux logo from the install i deleted....
OSX still boots fine... a install of Linux Mint i have on another partition(s) still boots fine ... everything appears to work... but i want to know what the possible issues are so i can be prepared...
this is frustrating...
so i went in and looked around with the remaining partitions and noticed the EFI partition which hadn't shown before i mistakenly tried to install another distro over ubuntu after wiping the partition it was on...
so i erased the EFI partition hoping that this would remove the g-damned hold out linux boot logo in reFIT... it didn't... now i suppose i can go back in and create a new EFI partition through gparted but that stupid linux logo will still be there... and i'll have another problem of getting the proper information back onto the EFI partition, which i am unsure of how to do, or where to even dig up the proper information...
i want to edit my boot mbr or grub or whatever the eff apple comps use as a boot record so that (or i am using as a boot record since i'm using reFIT) to get rid of this **** logo, so i can install another distro of linux and probably windows without having the **** supernumerary logo...
i would rather not wipe the whole drive (aka the primary partition the recovery partition) and do a fresh new install of os x (mountain lion) because i have OSX set up just the way i want it for personal use and work use... all my various tools and so on...
i don't use time machine and can't do a "restore" from a previous back up...
some one please help me out here, what are my options? am i going to have to bite the bullet and do a wipe of the entire drive and all its partitions to get my MBP back to 'normal'???
PS - using a macbook pro late 2011, standard specs, 13"...stqn wrote:
Expi1 wrote:Thanks, I'm mostly struggling with how to partition for Arch and then how to do the bootloader. I'm using Win8 64-bit and from what I understand a Legacy BIOS bootloader. I'm not entirely sure what I should be partitioning the C: into, I've done partitions before, just not for Arch and then I'm not sure whether to use GRUB or syslinux, or if I even need those. Or if I need to use GPT or MBR?
Your disk is already partitionned so you don’t have to choose between GPT or MBR, the choice is already made.
You don’t partition “C:”, that is the name of a Windows partition. You partition a drive.
Grub or syslinux, use whatever the beginners guide tells you to. Personally I think syslinux is simpler which is why I’m using it (but I’m not dual-booting, if that matters).
You’re not saying what your problem is with partitionning, so it’s hard to help.
Thanks for getting back to me, I'm not sure if I just create one large partition for Archlinux or if I have to create multiple? Where I'm also confused is with the Creating Filesystems part of the guide. I don't understand how I'd do this in Windows, or what /dev/sda1 is referring to.
As for the bootloader part, the Beginner's Guide gives you a choice between syslinux and grub, what I'm not sure about is which to use considering I'm dualbooting. How it will affect my windows bootloader, do I disregard that and use GRUB now? I'm unclear on how that works.
I'm also aware I need to disable Secure Boot, I just searched my BIOS options and couldn't find anything remotely relating to that, so I'm assuming it's not an issue since this computer was originally on Windows 7 anyway?
Thanks again, Expi.
Last edited by Expi1 (2014-03-06 19:54:30) -
[Solved] Setting up wifi in Dell D620
Hello,
I have Dell D620 laptop in witch I'm trying to set up WIFI.
I was following by instructions in: http://wiki.archlinux.org/index.php/Dell_Latitude_D620 and http://wiki.archlinux.org/index.php/Wir … 000-series
but after all I have error:
SIOCSIFFLAGS: No such file or directory
when I try to make it up with
ifconfig wlan0 up
but it's visible in iwconfig and ifconfig -a
I've tried to update linux-firmware also, but it's up-to-date.
I have autoload on in my rc.conf
output from rfkill list:
0: dell-wifi: Wireless LAN
Soft blocked: no
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
Last edited by seraph (2010-09-02 06:03:55)The problem was that I followed directly instructions and didn't checked that I have other wireless driver.
-
Distorted microphone with Linux mint in Lenovo G50-70
I have installed Linux Mint 17.1 in Lenovo B590 and microphone works perfectly. I installed Linux Mint on a new Lenovo g50-70, microphone works low and very distorted.
I've adjusted pavucontrol and I deleted to zero right channel mic, works perfectly for seconds but settings are deleted for auto adjusting mic and right channel is activated again. Then microphone works with distortion again.
Thank you for your attention.Hi roberto-
Yes, its a shame. I have also contacted lenovo support hoping that they can sort out this problem. However, first response from them was 'contact your internet service provider since internet connectivity goes down'! :-/ I am hoping I have been able to get through to them now at least about where the problem lies. I wonder if anyone has tried using the laptop with the same broadcom wireless adapter with some other version of OS (linux, windows 7 etc.) and whether they still face the same problem. I haven't tried that yet. If this is just an OS / driver issue I hope someone somewhere is working on a fix! If not, I guess the only other solution would be to get an external USB wifi adapter but that is not something one would want to do when you buy a brand new Lenovo laptop. This was a big let down for me.
-sag -
How do I install Linux Mint 17 from USB on Flex 10?
Hello everybody,
I want to install Linux Mint 17 on my Lenovo Flex 10 device.
I tried to make two different bootable installation USB sticks using the Rufus software but when I try to boot from them, the boot menu show only Windows. It seems that Flex 10 doesn't like my USB sticks. One is former Mandriva USB, the other is ADATA S102/8GB USB 3.0. Should I try another USB stick?
I've read several threads relating to this; someone suceeded, more people didn't get any answer.
One suspicious thing is that Rufus says that I need an EFI ISO image when I choose the UEFI MBR or UEFI GPT partition scheme. Isn't the Mint ISO an EFI ISO image? So the only option that remains is "BIOS or UEFI" scheme. I think that should work but it doesn't. They say that Mint 16 already supports UEFI. So Mint 17 should too.
Other thing is that there might be an issue with 32/64bit UEFI. How do I switch between 32 and 64 bit UEFI?
Am I missing something? What am I doing wrong?
--CIgydd Bach
Solved!
Go to Solution.So I'm going to answer my question myself. * Edit: An ironic note to Lenovo removed. They don't deserve it. *
For everybody who wants to boot or install Linux to Lenovo IdeaPad Flex 10:
Flex 10 has a 64-bit processor but a 32-bit EFI (UEFI) firmware!
Therefore I guess most of us have 32-bit Windows pre-installed for it.
Because Microsoft is so poor that they cannot provide us with a 64-bit system with a 32-bit bootloader. Oops, they cannot provide Lenovo with that combination.
And Lenovo, you guys prepared me a hell solving the riddle why only my Flex 10 doen't boot Linux, neither 32-bit distros nor the 64-bit ones.
* Edit: Not removing this one. Yes, you prepared me a hell but it was also a big fun solving the riddle. *
Because the 32-bit distros don't count with UEFI at all (they suppose older firmware, so called BIOS) and the 64-bit ones don't count with a 32-bit UEFI.
So I had to download a bootloader one guy precompiled for others to boot the USB with the installation ISO image for Ubuntu 14.04 64-bit. Here is the bootloader file:
https://github.com/jfwells/linux-asus-t100ta/blob/master/boot/bootia32.efi
The next post was very helpful to me. There I discovered that I have to download or compile a 32-bit UEFI bootloader:
http://forums.lenovo.com/t5/Linux-Discussion/Flex-10-the-installation-of-Linux/td-p/1516596/page/2
And here I finally followed the instructions how to boot to the USB stick and it helped me a lot in the overall process and progress:
http://www.jfwhome.com/2014/03/07/perfect-ubuntu-or-other-linux-on-the-asus-transformer-book-t100/
There you will see that you have to follow these steps:
Shrink your C drive in Windows and create a new partition to be deleted and re-used by Linux (Windows doesn't like surprises).
Turn off the Windows Fast Boot option (or Windows could damage your Linux partitions).
Compile or download (see above) a bootloader for the USB stick.
Boot the stick, make sure the live image runs.
Run the installation from the live system and install your Linux to the space you created previously (by deleting the new partition and creating root, home and swap partitions there).
Boot to the newly installed system using the USB stick (you still aren!t able to boot to Linux from disk).
You can skip the step of compiling WiFi drivers. On Flex 10, they work perfectly out of the box.
Following the instructions on the last linked page, compile Grub for 32-bit EFI and install it onto your disk. Here I suggest a slight change against the instructions. Don't name the compiled Grub "grubx64.efi" but leave the name "grubia32.efi". I don't know why but after leaving this name, my Flex started to boot Ubuntu from disk.
Edit: You don't have to compile Grub. In your newly installed system, issue the three following commands (this will install the Grub version for 32-bit UEFI, remove the 64-bit UEFI version, and clean up possible mess caused by removing it):
sudo apt-get install grub-efi-ia32
sudo apt-get remove grub-efi-amd64
sudo grub-install
Don't forget to change Grub settings in /etc/default/grub. Also do not forget to run the command "sudo upgrade-grub".
You can skip the step with compiling new kernel with Flex. Hardware support seems already pretty good (except of touchpad).
The touchpad interprets a single tap with a finger as a right click. You can disable tapping and get used to the buttons as a temporary solution. It doesn't swap the buttons if you set so. If you are left-handed as me, you can force the swap of the buttons by issuing xmodmap -e "pointer = 3 2 1" from a terminal or from a script that you can run automatically on startup.
I followed exactly the same steps with Linux Mint with a full success.
On the start, I thought that Linux installation on Flex 10 was impossible.
As you can see, it is possible. And if you want, you will succeed and reach that goal.
--CIgydd Bach -
HP LaserJet P1102W - no print output in Linux Mint 17.1 Cinnamon Desktop
I've just done a default install of Linux Mint 17.1 - as feared, no print output.
I'm guessing I need to install a driver - but I couldn't find anything easily on HP site, only Windows/Mac OS stuff. Are HP printers generally linux friendly? Where can I download drivers if they are? More over, I'm a total linux newbie, so any drivers need to be easily installed! I'm not currently familiar with Terminal windows and line commands!
My printer does have wireless enabled, but I have it connected via direct USB also.
Linux Mint did offer to run a diagnostic tool/debugging tool which gave a great deal of what means nothing to me. Debug output is below if it is helpful, but hoping a simple driver install will cure all ...
Debug Output:
Page 1 (Scheduler not running?):
{'cups_connection_failure': False}
Page 2 (Is local server publishing?):
{'local_server_exporting_printers': False}
Page 3 (Choose printer):
{'cups_dest': <cups.Dest HP-LaserJet-Professional-P-1102w (default)>,
'cups_instance': None,
'cups_queue': u'HP-LaserJet-Professional-P-1102w',
'cups_queue_listed': True}
Page 4 (Check printer sanity):
{'cups_device_uri_scheme': u'hp',
'cups_printer_dict': {'device-uri': u'hp:/usb/HP_LaserJet_Professional_P_1102w?serial=000000000W4037X5PR1a',
'printer-info': u'Hewlett-Packard HP LaserJet Professional P 1102w',
'printer-is-shared': True,
'printer-location': u'Leela',
'printer-make-and-model': u'HP LaserJet Professional P 1102w, hpcups 3.14.3, requires proprietary plugin',
'printer-state': 3,
'printer-state-message': u'',
'printer-state-reasons': [u'none'],
'printer-type': 167948,
'printer-uri-supported': u'ipp://localhost:631/printers/HP-LaserJet-Professional-P-1102w'},
'cups_printer_remote': False,
'hplip_output': (['',
'\x1b[01mHP Linux Imaging and Printing System (ver. 3.14.3)\x1b[0m',
'\x1b[01mDevice Information Utility ver. 5.2\x1b[0m',
'Copyright (c) 2001-13 Hewlett-Packard Development Company, LP',
'This software comes with ABSOLUTELY NO WARRANTY.',
'This is free software, and you are welcome to distribute it',
'under certain conditions. See COPYING file for more details.',
'\x1b[01mHP Linux Imaging and Printing System (ver. 3.14.3)\x1b[0m',
'\x1b[01mSystem Tray Status Service ver. 2.0\x1b[0m',
'Copyright (c) 2001-13 Hewlett-Packard Development Company, LP',
'This software comes with ABSOLUTELY NO WARRANTY.',
'This is free software, and you are welcome to distribute it',
'under certain conditions. See COPYING file for more details.',
'\x1b[01mhp:/usb/HP_LaserJet_Professional_P_1102w?serial=000000000W4037X5PR1a\x1b[0m',
'\x1b[01mDevice Parameters (dynamic data):\x1b[0m',
'\x1b[01m Parameter Value(s) \x1b[0m',
' agent1-ack False ',
' agent1-desc Black toner cartridge ',
' agent1-dvc 0 ',
' agent1-health 0 ',
' agent1-health-desc Good/OK ',
' agent1-hp-ink False ',
' agent1-id 0 ',
' agent1-kind 4 ',
' agent1-known False ',
' agent1-level 100 ',
' agent1-level-trigger 0 ',
' agent1-sku 85A ',
' agent1-type 1 ',
' agent1-virgin False ',
' back-end hp ',
" cups-printers ['HP-LaserJet-Professional-P-1102w'] ",
' cups-uri hp:/usb/HP_LaserJet_Professional_P_1102w?serial=000000000W',
' 4037X5PR1a ',
' dev-file ',
' device-state 1 ',
' device-uri hp:/usb/HP_LaserJet_Professional_P_1102w?serial=000000000W',
' 4037X5PR1a ',
' deviceid MFG:Hewlett-Packard;MDL: LaserJet Professional P ',
' 1102w;CMD:ZJSJS,URF,PCLm,PJL,ACL,HTTCLSLSRINTER;DEHPHP ',
' LaserJet Presessional P 110;F;FWVER:20110826; ',
' duplexer 0 ',
' error-state 0 ',
' host ',
' in-tray1 1 ',
' in-tray2 1 ',
' is-hp True ',
' media-path 1 ',
' panel 0 ',
' panel-line1 ',
' panel-line2 ',
' photo-tray 0 ',
' port 1 ',
' r 0 ',
' revision 254 ',
' rg 000 ',
' rr 000000 ',
' rs 000000000 ',
' serial 000000000W4037X5PR1a ',
' status-code 1000 ',
' status-desc Idle ',
' supply-door 1 ',
' top-door 1 ',
'\x1b[01m',
'Model Parameters (static data):\x1b[0m',
'\x1b[01m Parameter Value(s) \x1b[0m',
' align-type 0 ',
' clean-type 0 ',
' color-cal-type 0 ',
' copy-type 0 ',
' embedded-server-type 0 ',
' fax-type 0 ',
' fw-download False ',
' icon HP_LaserJet_1012.png ',
' io-mfp-mode 6 ',
' io-mode 1 ',
' io-support 10 ',
' job-storage 0 ',
' linefeed-cal-type 0 ',
' model HP_LaserJet_Professional_P_1102w ',
' model-ui HP LaserJet Professional P 1102w ',
' model1 HP LaserJet Professional P 1102w Printer ',
' monitor-type 0 ',
' panel-check-type 0 ',
' pcard-type 0 ',
' plugin 1 ',
' plugin-reason 1 ',
' power-settings 0 ',
' pq-diag-type 0 ',
' r-type 0 ',
' r0-agent1-kind 4 ',
' r0-agent1-sku 85A ',
' r0-agent1-type 1 ',
' scan-src 0 ',
' scan-type 0 ',
' status-battery-check 0 ',
' status-dynamic-counters 0 ',
' status-type 8 ',
' support-released True ',
' support-subtype 2202411 ',
' support-type 2 ',
' support-ver 3.12.6 ',
" tech-class ['LJZjsMono'] ",
" tech-subclass ['NoAutoDuplex'] ",
' tech-type 3 ',
' usb-pid 4138 ',
' usb-vid 1008 ',
' wifi-config 3 ',
'Done.',
['\x1b[35;01mwarning: No display found.\x1b[0m',
'\x1b[31;01merror: hp-info -u/--gui requires Qt4 GUI support. Entering interactive mode.\x1b[0m',
'\x1b[35;01mwarning: No display found.\x1b[0m',
'\x1b[31;01merror: hp-systray requires Qt4 GUI and DBus support. Exiting.\x1b[0m',
'\x1b[35;01mwarning: Unable to connect to dbus. Is hp-systray running?\x1b[0m',
0),
'is_cups_class': False,
'local_cups_queue_attributes': {'charset-configured': u'utf-8',
'charset-supported': [u'us-ascii', u'utf-8'],
'color-supported': True,
'compression-supported': [u'none', u'gzip'],
'copies-default': 1,
'copies-supported': (1, 9999),
'cups-version': u'1.7.2',
'device-uri': u'hp:/usb/HP_LaserJet_Professional_P_1102w?serial=000000000W4037X5PR1a',
'document-format-default': u'application/octet-stream',
'document-format-supported': [u'application/octet-stream',
u'application/pdf',
u'application/postscript',
u'application/vnd.adobe-reader-postscript',
u'application/vnd.cups-pdf',
u'application/vnd.cups-pdf-banner',
u'application/vnd.cups-postscript',
u'application/vnd.cups-raster',
u'application/vnd.cups-raw',
u'application/x-cshell',
u'application/x-csource',
u'application/x-perl',
u'application/x-shell',
u'image/gif',
u'image/jpeg',
u'image/png',
u'image/tiff',
u'image/urf',
u'image/x-bitmap',
u'image/x-photocd',
u'image/x-portable-anymap',
u'image/x-portable-bitmap',
u'image/x-portable-graymap',
u'image/x-portable-pixmap',
u'image/x-sgi-rgb',
u'image/x-sun-raster',
u'image/x-xbitmap',
u'image/x-xpixmap',
u'image/x-xwindowdump',
u'text/css',
u'text/html',
u'text/plain'],
'finishings-default': 3,
'finishings-supported': [3],
'generated-natural-language-supported': [u'en-us'],
'ipp-versions-supported': [u'1.0',
u'1.1',
u'2.0',
u'2.1'],
'ippget-event-life': 15,
'job-creation-attributes-supported': [u'copies',
u'finishings',
u'ipp-attribute-fidelity',
u'job-hold-until',
u'job-name',
u'job-priority',
u'job-sheets',
u'media',
u'media-col',
u'multiple-document-handling',
u'number-up',
u'output-bin',
u'orientation-requested',
u'page-ranges',
u'print-color-mode',
u'print-quality',
u'printer-resolution',
u'sides'],
'job-hold-until-default': u'no-hold',
'job-hold-until-supported': [u'no-hold',
u'indefinite',
u'day-time',
u'evening',
u'night',
u'second-shift',
u'third-shift',
u'weekend'],
'job-ids-supported': True,
'job-k-limit': 0,
'job-k-octets-supported': (0, 476568600),
'job-page-limit': 0,
'job-priority-default': 50,
'job-priority-supported': [100],
'job-quota-period': 0,
'job-settable-attributes-supported': [u'copies',
u'finishings',
u'job-hold-until',
u'job-name',
u'job-priority',
u'media',
u'media-col',
u'multiple-document-handling',
u'number-up',
u'output-bin',
u'orientation-requested',
u'page-ranges',
u'print-color-mode',
u'print-quality',
u'printer-resolution',
u'sides'],
'job-sheets-default': (u'none', u'none'),
'job-sheets-supported': [u'none',
u'classified',
u'confidential',
u'form',
u'secret',
u'standard',
u'topsecret',
u'unclassified'],
'jpeg-k-octets-supported': (0, 476568600),
'jpeg-x-dimension-supported': (0, 65535),
'jpeg-y-dimension-supported': (1, 65535),
'marker-change-time': 0,
'media-bottom-margin-supported': [423, 547],
'media-col-default': u'(unknown IPP value tag 0x34)',
'media-col-supported': [u'media-bottom-margin',
u'media-left-margin',
u'media-right-margin',
u'media-size',
u'media-source',
u'media-top-margin',
u'media-type'],
'media-default': u'iso_a4_210x297mm',
'media-left-margin-supported': [423, 635],
'media-right-margin-supported': [423, 635],
'media-size-supported': [u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)'],
'media-source-supported': [u'auto',
u'manual'],
'media-supported': [u'iso_a6_105x148mm',
u'iso_a5_148x210mm',
u'jpn_hagaki_100x148mm',
u'om_double-postcard_148.17x200.03mm',
u'om_jb5_182.12x257.05mm',
u'na_executive_7.25x10.5in',
u'om_16k195x270_195.09x269.88mm',
u'om_16k184x260_184.15x260mm',
u'oe_16k197x273_7.75x10.75in',
u'na_letter_8.5x11in',
u'iso_a4_210x297mm',
u'oe_flsa_8.5x13in',
u'na_legal_8.5x14in',
u'na_monarch_3.875x7.5in',
u'iso_dl_110x220mm',
u'na_number-10_4.125x9.5in',
u'iso_c5_162x229mm',
u'om_env-b5_176.04x250.12mm',
u'custom_min_3x5in',
u'custom_max_17x36in'],
'media-top-margin-supported': [423, 547],
'media-type-supported': [u'stationery'],
'multiple-document-handling-supported': [u'separate-documents-uncollated-copies',
u'separate-documents-collated-copies'],
'multiple-document-jobs-supported': True,
'multiple-operation-time-out': 300,
'natural-language-configured': u'en-us',
'notify-attributes-supported': [u'printer-state-change-time',
u'notify-lease-expiration-time',
u'notify-subscriber-user-name'],
'notify-events-default': [u'job-completed'],
'notify-events-supported': [u'job-completed',
u'job-config-changed',
u'job-created',
u'job-progress',
u'job-state-changed',
u'job-stopped',
u'printer-added',
u'printer-changed',
u'printer-config-changed',
u'printer-deleted',
u'printer-finishings-changed',
u'printer-media-changed',
u'printer-modified',
u'printer-restarted',
u'printer-shutdown',
u'printer-state-changed',
u'printer-stopped',
u'server-audit',
u'server-restarted',
u'server-started',
u'server-stopped'],
'notify-lease-duration-default': 86400,
'notify-lease-duration-supported': (0,
2147483647),
'notify-max-events-supported': [100],
'notify-pull-method-supported': [u'ippget'],
'notify-schemes-supported': [u'dbus',
u'mailto',
u'rss'],
'number-up-default': 1,
'number-up-supported': [1, 2, 4, 6, 9, 16],
'operations-supported': [2,
4,
5,
6,
8,
9,
10,
11,
12,
13,
14,
16,
17,
18,
19,
20,
21,
22,
23,
24,
25,
26,
27,
28,
34,
35,
37,
38,
56,
57,
59,
16385,
16386,
16387,
16388,
16389,
16390,
16391,
16392,
16393,
16394,
16395,
16396,
16397,
16398,
16399,
16423,
14],
'orientation-requested-default': None,
'orientation-requested-supported': [3,
4,
5,
6],
'output-bin-default': u'face-down',
'output-bin-supported': [u'face-down'],
'page-ranges-supported': True,
'pages-per-minute': 1,
'pages-per-minute-color': 1,
'pdf-k-octets-supported': (0, 476568600),
'pdf-versions-supported': [u'adobe-1.2',
u'adobe-1.3',
u'adobe-1.4',
u'adobe-1.5',
u'adobe-1.6',
u'adobe-1.7',
u'iso-19005-1_2005',
u'iso-32000-1_2008',
u'pwg-5102.3'],
'pdl-override-supported': [u'attempted'],
'port-monitor': u'none',
'port-monitor-supported': [u'none'],
'ppd-timestamp': u'*',
'print-color-mode-default': u'color',
'print-color-mode-supported': [u'monochrome',
u'color'],
'print-quality-default': 4,
'print-quality-supported': [3, 4],
'printer-commands': u'none',
'printer-current-time': u'(IPP_TAG_DATE)',
'printer-dns-sd-name': u'Hewlett-Packard HP LaserJet Professional P 1102w @ Leela',
'printer-error-policy': u'retry-job',
Hi @durandal,
I read your post and see that you need the drivers for the P1102w printer. I can provide the website for you.
Here is the link for the HP Linux Imaging and Printing website. HP Linux imaging and printing.
Here is the link for the P1102w drivers. HP LaserJet Professional p1102w Printer.
If you need more information, please post your questions at the Linux Distribution Forums.
If you appreciate my efforts, please click the Thumbs up button below.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
Firefox running under Linux Mint (based on Ubuntu) 12 (KDE) won't install extensions for Firefox
Linux Mint (based on Ubuntu) 12, KDE desktop
Firefox 10.0
Started up Firefox right after Mint was installed. On the add-ons page video download helper was shown as a featured extension and I installed it, then rebooted when prompted. After that, Firefox would never install another extension again. Just gives download error.
I google searched and in a forum I found a post about uninstalling and reinstalling Firefox. I tried it. First time I started it up, it installed video download helper again, but then would not install any other extension after that. I tried numerous extensions I '''KNOW''' are working in Firefox 10.0 because they are working in Firefox over on my Win 7. Everytime I get a download error, either from the addons site or from the Add-ons Manager in Firefox.
Someone told me on the Mint forums that I needed to add a subdirectory on a certain directory, so I did that. Didn't work.
It seems Ubuntu disables the root, or cripples it, and I guess Mint does too. You can still use sudo when doing things in Ubuntu (and Mint I would assume, since it's based on Ubuntu) but you can't get true 'superuser' access as I understand it. But, I don't think this would have any bearing on the problem, or my search of the Mint forums would have come up with all kinds of threads screaming about this.Problem solved - it was caused by an add-on called "PDF Download 3.0.0.2)
To fix - in Firefox :
Click on '''Tools''' command (top of screen)
Select '''Extensions'''
click on "'''disable''' button beside '''PDF Download'''
Close Firefox and restart it.
Clicking on any pdf file should open a new tab now and the document will appear there.
Maybe you are looking for
-
How do I change the font in mail permantly
I can change the font in mail but it isn't permanent. I am talking about composing E-mail.
-
How to receive a xml CDATA in string element when OSB calling a webservice?
How to receive a xml CDATA in string element when OSB calling a webservice? I have a business service (biz) that route to operation of a webservice. A example of response to this webservice legacy: <soapenv:Envelope xmlns:soapenv="http://schemas.xmls
-
Two copies of most files - fix?
I'm new to Aperture and inadvertently imported two versions of the iPhoto files - causing almost all older photos to be double. I didn't notice this immediately, and managed to import additional new photos into both libraries. I currently have almost
-
Question about attributes, UDAs, Associations, etc
Hello, In Essbase database (v 9.3.1), can someone tell me the usefulness/benefits of attributes, associations, and UDAs? What can they do/make it easier to do? Also in my information tab, I have some fields called variance reporting expense (could be
-
Hi not really sure what my question s is - or should be. I'm preparing av 1024*768 backgound for a\ web site On layer one I have a gradient in the clients colours I also have four images supplied by the client which I I modified by removing the backg