Problems to generate WSDL file
Hello to all,
I am adapting the sample ( /xws-security/samples/simple) to develop my service. When I compile the file WSDL no is adapted with my changes. I think that the problems is in build.xml, in gen-service target where execute wscompile to generate WSDL, but I do not know the solution.
I hope that somebody can help me.
thanks to all,
Antonio.
At least I don't have a clue about ABAP Proxy.
You are pretty much on your own unless someone
else has tried it.
Preston
>>> On Tuesday, August 03, 2010 at 8:26 AM,
pawelnowicki<[email protected]> wrote:
> Hi,
>
> For our customer we try to bind SAP with GW Calendar using GW Web
> Services. We tried to generate ABAP Proxy from groupwise.wsdl file but
> there are problems: GW uses recursive data structures what ABAP Proxy
> can not use. Is there any simple solution to this problem?
>
> Best regards
> Pawel
Similar Messages
-
Problem in generating WSDL file for triggering BPM process
Hello Experts,
I have a working BPM process which I want to trigger using a web service. I am referring following blog link to generate New WSDL file and perform further operations:
/people/arafat.farooqui/blog/2009/08/13/introduction-to-sap-netweaver-bpm-part-4
However, it everything goes well until I set the type for the "New Element". I want to set type to context of my component controller. So I selected Set type --> Enclosing Project and I seleted Context of my component controller.
Upon saving this, I am getting this error:
"../../rep/ui/com.sap.demo.wd_ui_mna.wd.comp.c_fillmynameage.C_FillMyNameAgeInterface.xsd" is not a path relative to "src/wsdl/NewWSDLFile.wsdl" because it contains too many '../'
I am not sure what is happening here. I have also removed the response element(s) from WSDL source.
What am I missing here?
Thanks in advance,
AmeyaCross post in EBiz forum -
General EBS Discussion
Regards,
Anuj -
Error while Generating WSDL File from SAP WSDLGenerator
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
Exception Text **************
System.NullReferenceException: Object reference not set to an instance of an object.
at WebServiceDescription.SelectOperation.ShowUDOsList(String sessionID)
at WebServiceDescription.SelectOperation..ctor(String sessionID)
at WebServiceDescription.WsdlServicesGenerator.ShowOptions()
at WebServiceDescription.Form1.btCreateWsdl_Click(Object sender, EventArgs e)
at System.Windows.Forms.Control.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3082 (QFE.050727-3000)
CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
WsdlServicesGenerator
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Program%20Files/SAP/SAP%20Business%20One%20Web%20Services/WsdlServicesGenerator/WsdlServicesGenerator.exe
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3082 (QFE.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
System.Web.Services
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Web.Services/2.0.0.0__b03f5f7f11d50a3a/System.Web.Services.dll
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
axh7tjvl
Assembly Version: 1.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
o_2nbqv_
Assembly Version: 1.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
I am facing problem While Generating WSDL File from WSDL Geerator which is provided by SAP Business One
If any body has resolved this. Please help Me...!
Thanks
MritunjayHi.
We've seen that error too few times.
We downloaded the sourcecode for the wdsl generator and discovered,
that in our case, it was because we had no user defined objects.
Its actually a bug as far as I can see, where the wdsl generator tries
to enumerate a empty recordset, and crashes.
Regards
Jørgen T. -
Could not able to generate WSDL file in ID
Hi all,
I am Trying to generate wsdl file in ID->tools->define ws.
in overview the following error is displayed.
<?xml version="1.0" encoding="ISO-8859-1"?>
<err>
Object External Message KCRS_WSDL | http://ehro.eds.com/FRAMEWORK/Common | publishLeaveStatusSoapOut | http://www.ehro.eds.com/xsd/utility not found in Integration Repository
</err>
http://host:port /XISOAPAdapter/MessageServlet?channel=p:s:c is given in the step2 ,and required details in step 3 and 4.
in step5 the above error is seen.
Let me knoe where is the problem.
Thanks,
Srinihi
folow these links
/people/daniel.graversen/blog/2008/04/14/use-proxy-to-inspect-httpsoap-requests
https://weblogs.sdn.sap.com/pub/wlg/1442 [original link is broken] [original link is broken] [original link is broken]
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_weblog&query=wsdlusingProxy+&adv=false&sortby=cm_rnd_rankvalue
regards
Sandeep
if helpful kindly reward points -
How can i include Services and Bindung in a generated WSDL file?
Hi,
i what to use a generated wsdl file from an erp system, to build a web service client with WSDL2Java (org.apache.axis.wsdl.WSDL2Java).
I noticed, that services an bindings are missing, also a policy is included.
How can i include services and bindings in the wsdl and exclude the policy?
Thanks!well, I assume you have SOAMANAGER.
choose your service & "Apply Selection" (very useless button btw)
select a binding in the dropdown box or create on if you do not have one yet
Click button "Show WSDL options" (actually they do not really look like buttons in WD; call it yellow blot)
Some extra config area is thrown onto your screen (without any sense for usability or design); Change the radio button for WSDL format from "WS policy" to "Standard"; make sure the first radio button group is on "True" for monolithic
Now click the link (why is this a link and no blot?) called "Display selected bindings WSDL URL"
an extra text field is again thrown onto your screen somwhere between the dropdown and the WSDL option config area containing an URL (get out your glasses if you don't see the sub-10pt-letters)
hope it helps,
anton -
Q <WWSD-10> Is the generated WSDL file by Weblogic use for UDDI registration?
A <WWSD-10> WLS6.1 does not provide UDDI services and it has no automatic way to
register your web service with a service broker or repository. If you were to do
it yourself one of the things you would have to supply would be the WSDL file that
describes your web service.Q <WWSD-10> Is the generated WSDL file by Weblogic use for UDDI registration?
A <WWSD-10> WLS6.1 does not provide UDDI services and it has no automatic way to
register your web service with a service broker or repository. If you were to do
it yourself one of the things you would have to supply would be the WSDL file that
describes your web service. -
Problems reading generated pdf-files
Hi all,
I have problems reading generated pdf-files from
Report Builder 6.0.8.11.3
An error-message occurs when opening the pdf with
Adobe Acrobat 5.0.1:
... problem 110 and after moving in an empty pdf-document
the messages:
- too few operands
- an unrecognized token
I think the solution must be very simple, but the docu and
other info resources provide nothing aboutthis issue.
Greetings,
Bernhard<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by the oracle reports team:
hello,
there are no known problems with reading reports PDFs with later Acrobat Readers. maybe your file is somehow corrupt.
regards,
the oracle reports team<HR></BLOCKQUOTE>
I had to install a local printer, the network printer is not appropriate here. After that, everything is fine :-)),
Greetings,
Bernhard
null -
Problem in Creating .wsdl file and mapping.xml with ant
hi
i am created my .wsdl file and mapping.xml file with wscompile tool but when i run this by ant tool it show a problem.
the command runs on command prompt but when run throught ant file it shows a following error :-
Execute failed: java.io.IOException: CreateProces: wscompile -define -mapping build\classes\META-INF\mapping.xml -d . -nd build\.................and so on
so if anybody have any idea then plz help me asap
thanxThe following Ant snippet is the way I've defined my wscompile task. I'm creating a web application and it looks like yours might be an EJB endpoint, but you can adjust where necessary:
<taskdef name="wscompile" classname="com.sun.xml.rpc.tools.ant.Wscompile">
<classpath refid="compile.classpath" />
</taskdef>
<target name="init">
<echo message="-------- ${appname} --------" />
</target>
<!-- This target compiles the server components using an existing WSDL as the driving document.
The configuration file must use the <wsdl> element giving the location (local file system
or URL) of the WSDL document.
Note: the fork argument is needed to over come a bug when using the mapping argument. See
http://forum.java.sun.com/thread.jspa?threadID=592994&tstart=0
-->
<target name="generate-server-from-WSDL" depends="init">
<wscompile fork="yes"
keep="true"
base="${basedir}/WebContent/WEB-INF/classes"
import="true"
features="wsi"
xPrintStackTrace="true"
verbose="true"
mapping="${basedir}/WebContent/WEB-INF/jaxrpc-mapping.xml"
sourcebase="${basedir}/src"
config="${config.server.doclit.file}">
<classpath>
<path refid="compile.classpath" />
</classpath>
</wscompile>
</target>
<target name="compile-server-from-WSDL" depends="generate-server-from-WSDL">
<javac srcdir="${basedir}/src" destdir="${basedir}/WebContent/WEB-INF/classes" debug="${compile.debug}">
<classpath refid="compile.classpath" />
</javac>
</target>Just make sure that the named destination directories exist before you run the script.
If you'd like more details on the wscompile Ant task, I found the following pages invaluable:
https://jax-rpc.dev.java.net/whitepaper/1.1/index-part1.html -
Problem with generating WSDL from ABAP
Hi all
I have encountered a problem.I created a WSDL from a ABAP program,but in the ABAP function module what it does is it inserts value onto a transparent table from a table which let me specify as a virtual table.So after generating the wsdl i am surprised to see the virtual table has come in the output part .I am unable to make out why this happened.
i am mentioning below the ABAP code which inserts value on to a transparent table from a virtual table
Code-Function module-smlg_modify
<u>virtual table Definition</u>
"table with items for insertion
DATA INS_TAB LIKE RZLLITAB OCCURS 0 WITH HEADER LINE.
DESCRIBE TABLE MODIFICATIONS LINES ITEMS.
LOOP AT MODIFICATIONS.
MODIFICATIONS-GROUPTYPE = GROUPTYPE.
CASE MODIFICATIONS-MODIFICATN.
WHEN 'I'. "insertion of an item
INS_TAB = MODIFICATIONS.
APPEND INS_TAB.
END LOOP
DESCRIBE TABLE INS_TAB LINES ITEMS.
IF ITEMS > 0.
INSERT RZLLITAB FROM TABLE INS_TAB-->(one i mentioned as virtual.)
ENDIF.
In such a case how comes the virtual comes as the output in wsdl
I am mentioning below the the wsdl
<----
>
<?xml version="1.0" encoding="ASCII"?>
<wsdl:definitions xmlns:ctc="http://sap.com/ctc" xmlns:ctc-bapi="http://www.sap.com/ctc/abapprovider" xmlns:ctc_ref="urn:example/encoded" xmlns:ctclib="http://sap.com/ctc/schema/lib" xmlns:plnk="http://schema.xmlsoap.org/ws/2003/05/partner-link" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:tns="http://sap.com/ctc/services" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" name="SMLG_MODIFYServiceDefinition" targetNamespace="http://sap.com/ctc/services">
<wsdl:types>
<xsd:schema xmlns:tns="http://sap.com/ctc/services" xmlns:xsd="http://www.w3.org/2001/XMLSchema" targetNamespace="http://sap.com/ctc/services">
<xsd:element name="GROUPTYPE" type="xsd:string"/>
<xsd:element name="SET_LOCK" type="xsd:string"/>
<xsd:complexType name="ERFC_MODIFICATIONS">
<xsd:sequence>
<xsd:element name="CLASSNUM" type="xsd:int"/>
<xsd:element name="CLASSNAME" type="xsd:string"/>
<xsd:element name="GROUPTYPE" type="xsd:string"/>
<xsd:element name="TIMERERD" type="xsd:int"/>
<xsd:element name="LOGRERD" type="xsd:int"/>
<xsd:element name="FAVTYPE" type="xsd:string"/>
<xsd:element name="MODIFICATN" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="ERFC_MODIFICATIONS" type="tns:ERFC_MODIFICATIONS"/>
<xsd:element name="CLASSNUM" type="xsd:int"/>
<xsd:element name="CLASSNAME" type="xsd:string"/>
<xsd:element name="GROUPTYPE" type="xsd:string"/>
<xsd:element name="TIMERERD" type="xsd:int"/>
<xsd:element name="LOGRERD" type="xsd:int"/>
<xsd:element name="FAVTYPE" type="xsd:string"/>
<xsd:element name="MODIFICATN" type="xsd:string"/>
</xsd:schema>
</wsdl:types>
<wsdl:message name="SMLG_MODIFYInput">
<wsdl:part name="GROUPTYPE" type="xsd:string"/>
<wsdl:part name="SET_LOCK" type="xsd:string"/>
</wsdl:message>
<wsdl:message name="SMLG_MODIFYOutput">
<wsdl:part name="ERFC_MODIFICATIONS" type="tns:ERFC_MODIFICATIONS"/>
<wsdl:part name="CLASSNUM" type="xsd:int"/>
<wsdl:part name="CLASSNAME" type="xsd:string"/>
<wsdl:part name="GROUPTYPE" type="xsd:string"/>
<wsdl:part name="TIMERERD" type="xsd:int"/>
<wsdl:part name="LOGRERD" type="xsd:int"/>
<wsdl:part name="FAVTYPE" type="xsd:string"/>
<wsdl:part name="MODIFICATN" type="xsd:string"/>
</wsdl:message>
<wsdl:portType name="SMLG_MODIFYPT">
<wsdl:operation name="SMLG_MODIFYOperation">
<wsdl:input message="SMLG_MODIFYInput"/>
<wsdl:output message="SMLG_MODIFYOutput"/>
<wsdl:fault message="ctclib:BAPIException" name="BAPIException"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="SMLG_MODIFYBinding" type="SMLG_MODIFYPT">
<ctc:binding transport="com.sap.mw.jco"/>
<wsdl:operation name="SMLG_MODIFYOperation">
<ctc-bapi:function name="SMLG_MODIFY"/>
<wsdl:input>
<ctc:body encodingStyle="ctc:SCHEMA2ABAP">
<ctc-bapi:partbinding name="GROUPTYPE">
<field elementname="GROUPTYPE">
<name>GROUPTYPE</name>
<type>CHAR</type>
</field>
</ctc-bapi:partbinding>
<ctc-bapi:partbinding name="SET_LOCK">
<field elementname="SET_LOCK">
<name>SET_LOCK</name>
<type>CHAR</type>
</field>
</ctc-bapi:partbinding>
</ctc:body>
</wsdl:input>
<wsdl:output>
<ctc:body encodingStyle="ctc:SCHEMA2ABAP">
<ctc-bapi:partbinding name="ERFC_MODIFICATIONS">
<table elementname="ERFC_MODIFICATIONS" jcoName="ERFC_MODIFICATIONS">
<structure elementname="RZLLIMODGP" jcotype="RZLLIMODGP">
<field elementname="CLASSNUM">
<name>CLASSNUM</name>
<type>NUMC</type>
</field>
<field elementname="CLASSNAME">
<name>CLASSNAME</name>
<type>CHAR</type>
</field>
<field elementname="GROUPTYPE">
<name>GROUPTYPE</name>
<type>CHAR</type>
</field>
<field elementname="TIMERERD">
<name>TIMERERD</name>
<type>NUMC</type>
</field>
<field elementname="LOGRERD">
<name>LOGRERD</name>
<type>NUMC</type>
</field>
<field elementname="FAVTYPE">
<name>FAVTYPE</name>
<type>CHAR</type>
</field>
<field elementname="MODIFICATN">
<name>MODIFICATN</name>
<type>CHAR</type>
</field>
</structure>
</table>
</ctc-bapi:partbinding>
<ctc-bapi:partbinding name="CLASSNUM">
<field elementname="CLASSNUM">
<name>CLASSNUM</name>
<type>NUMC</type>
</field>
</ctc-bapi:partbinding>
<ctc-bapi:partbinding name="CLASSNAME">
<field elementname="CLASSNAME">
<name>CLASSNAME</name>
<type>CHAR</type>
</field>
</ctc-bapi:partbinding>
<ctc-bapi:partbinding name="GROUPTYPE">
<field elementname="GROUPTYPE">
<name>GROUPTYPE</name>
<type>CHAR</type>
</field>
</ctc-bapi:partbinding>
<ctc-bapi:partbinding name="TIMERERD">
<field elementname="TIMERERD">
<name>TIMERERD</name>
<type>NUMC</type>
</field>
</ctc-bapi:partbinding>
<ctc-bapi:partbinding name="LOGRERD">
<field elementname="LOGRERD">
<name>LOGRERD</name>
<type>NUMC</type>
</field>
</ctc-bapi:partbinding>
<ctc-bapi:partbinding name="FAVTYPE">
<field elementname="FAVTYPE">
<name>FAVTYPE</name>
<type>CHAR</type>
</field>
</ctc-bapi:partbinding>
<ctc-bapi:partbinding name="MODIFICATN">
<field elementname="MODIFICATN">
<name>MODIFICATN</name>
<type>CHAR</type>
</field>
</ctc-bapi:partbinding>
</ctc:body>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="SMLG_MODIFYService">
<wsdl:port binding="SMLG_MODIFYBinding" name="SMLG_MODIFYServicePort"/>
</wsdl:service>
</wsdl:definitions>
>
My purpose is to create a .cproc file which will pass values to this wsdl file.I dont know how to pass as the table which the function module accepts as input is output in wsdl.so i am not aware how to pass value.Kindly help me out how to create a .cproc file for it
Thanks
NeetaHello Anton,
where on the abap-server I can find the generated wsdl?
I have downloaded the wsdl to eclipse 3.3 and can call the webserrvice successfull.
But when I try o call the webservice with <netweaver-server>/wsnavigator, I can input the data-fields, but the request answer is that the web-service is not found on the given domain.
So I want manipulate the domain in the wsdl.
Best regards
Oliver Prodinger -
Stub generation problem with the wsdl file
Hi all
I'm trying to write a simle webservice client based on JAX. My webservice is working fine I've tested it with a standalone app. In my webservice I'm using complex type. Problem is that i can't generate properly stubs. This is a msg I'm getting during the generation
warning: ignoring operation "getEmployee": message part does not refer to a schema element declaration
warning: Port "EmployeeIFPort" does not contain any usable operationsBecause of that my method to get the Object from the webservice is not generated.
This is the wsdl file.
<?xml version="1.0" encoding="UTF-8"?>
<definitions name="EmployeeService" targetNamespace="urn:Foo" xmlns:tns="urn:Foo" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">
<types>
<schema targetNamespace="urn:Foo" xmlns="http://www.w3.org/2001/XMLSchema" xmlns:soap11-enc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:tns="urn:Foo" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<import namespace="http://schemas.xmlsoap.org/soap/encoding/"/>
<complexType name="Employee">
<sequence>
<element name="name" type="xsd:string"/>
<element name="surname" type="xsd:string"/>
<element name="age" type="xsd:int"/>
</sequence>
</complexType>
</schema>
</types>
<message name="EmployeeIF_getEmployee">
<part name="String_1" type="xsd:string"/>
<part name="String_2" type="xsd:string"/>
<part name="int_3" type="xsd:int"/>
</message>
<message name="EmployeeIF_getEmployeeResponse">
<part name="result" type="tns:Employee"/>
</message>
<portType name="EmployeeIF">
<operation name="getEmployee" parameterOrder="String_1 String_2 int_3">
<input message="tns:EmployeeIF_getEmployee"/>
<output message="tns:EmployeeIF_getEmployeeResponse"/>
</operation>
</portType>
<binding name="EmployeeIFBinding" type="tns:EmployeeIF">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document"/>
<operation name="getEmployee">
<soap:operation soapAction=""/>
<input>
<soap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" use="literal"/>
</input>
<output>
<soap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" use="literal"/>
</output>
</operation>
</binding>
<service name="EmployeeService">
<port name="EmployeeIFPort" binding="tns:EmployeeIFBinding">
<soap:address location="http://localhost:8080/EmployeeService/getEmployee"/>
</port>
</service>
</definitions>However the complex type class Employee is generated properly as well as other stub classes like the interface EmployeeIF, EmployeeIF_getEmployee_RequestStruct and EmployeeIF_getEmployee_ResponseStruct (I mean i think they are generated properly). As I said befor the problem is that the webservice method from the EmployeeIF.getEmployee() is not generated in the EmployeeIF_Stub. Any ideas why? I'm using WTK 2.5
thx in advance :)Here i Followed Url &sap-user=XXX&sap-password=YYY to the WSDL-URL with XXX and YYY being your username and password and you will be authenticated.
Later i Struck. Actual my requirement is I have two views i want to take a value from the first view and then return value displayed in the second view. All input/output parameters are the taken from the WSDL file. Can you please Help me. -
Problem in Importing wsdl file in IR
Hi ,
I am doing soap receiver scenario.I had a wsdl generated from .Net and i imported the wsdl , i am not able to find teh methods in the external defination ,
Wat wil be theproblem.
Regards,
ShaikHi,
problems occur during the import of xsd and wsdl files as external definitions if the target namespace contains more than 60 characters. The system does not issue any error message, however, the list of the
recognized messages remains empty.
Solution;
For a wsdl file, you simply need to edit the target namespace manually ( attribute "targetNamespace" of the wsdl:definitions element) and reduce the number of characters to less than 60. For the structure of the extracted messages (exception: import assuming rpc style binding, see below), this target namespace does not have any importance.
Regards,
Jayasimha Jangam -
Performance problems to generate PDF files using CR
Hi,
I develop an application that read TXT files and uses this information to generate PDF files, but I'm having problems with performance to generate this PDF, each files are taking at least 1 minute to create the file. I realized that some TMP and RPT files are generated and deleted in the temp folder of the machine which is running the application, but after some time creating the PDF's the RPT files aren't deleted and I have an exception on my app:
Memory full.
Failed to export the report.
Not enough memory for operation. at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext)
at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext)
at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToDisk(ExportFormatType formatType, String fileName)
The server who is running this application is a Dual Core AMD Opteron 2.61 ghz, 7 GB RAM
The framework version is 2.0 and the Crystal Reports dll version is 10.5.3700.0
Thanks.Hi,
If you are using IIS5 the give aspnet full permission to the Temp folders. For IIS6 give IIS_wpg permission.
For this you need to right click on the folder,
go to properties,
security tab,
click on Add,
Type aspnet/iis_wpg,
select top note in Location and click on check on check names.
Give full control and
click ok.
Also try using GC.Collect(), reportDocObject.Close() and reportDocObject.Dispose() as clean up code.
Regards,
AG. -
Problem Displaying generated Markup File (CLOB column)
Dear Colleague,
I am attempting to display the results of a generated Markup File in a Forms Text Item. The code (Below) is in a WHEN-BUTTON-PRESSED trigger.
Step 1: generates the markup file and stores it in the MARKUP_DOCUMENTS table.
Step 2: Copies the clob column DOCUMENT to the clob variable MYCLOB
--> At Step 2, my form crashes !!!
Is Oracle Forms not able to process CLOBs? The form was compiled as if there was no problem.
How can I access the results of the generated Markup File in the MARKUP_DOCUMENTS table and present it to the Oracle Forms user?
Best regards,
Randy
declare
myclob clob := empty_clob();
read_amount number(4):= 500;
read_offset number(4):= 1;
buffer varchar2(500) ;
begin
-- Step 1:
ctx_doc.markup(index_name => 'documents_index',
textkey => to_char(:hitlist_block.id),
text_query => :search_block.search_clause,
restab => 'markup_documents',
query_id => '1',
plaintext => TRUE);
-- Step 2:
SELECT document
INTO myclob
FROM markup_documents
WHERE query_id = 1;
-- Step 3:
dbms_lob.read(myclob, read_amount, read_offset, buffer);
-- Step 4:
:markup_block.markup_text := buffer;
go_block ('markup_block');
exception
when others then
message ('Document could not be displayed: '||dbms_error_text);
end;Hello,
This is what i use to display an HTML Forms Text Item:
Declare
lc$Texte Varchar2(2000) ;
lf$fic client_text_io.file_type ;
Begin
lf$fic := client_text_io.fopen('c:\test.htm', 'w');
client_text_io.put_line( lf$fic, '<html>' ) ;
client_text_io.put_line( lf$fic, '<script language="JavaScript">' ) ;
client_text_io.put_line( lf$fic, 'parent.window.resizeTo(600,400);' ) ;
client_text_io.put_line( lf$fic, '</script>' ) ;
client_text_io.put_line( lf$fic, '<body>' ) ;
client_text_io.put_line( lf$fic, '<FONT face="sans-serif" color=#1B62AB size=2>' ) ;
client_text_io.put_line( lf$fic, replace( :MAILS.TEXTE, CHR(10), '<br>') ) ;
client_text_io.put_line( lf$fic, '</body></html>' ) ;
client_text_io.fclose( lf$fic ) ;
client_host('cmd /C START "x" iexplore.exe c:\test.htm' ) ;
client_host('del c:\test.htm' ) ;
End;Francois -
Using generated wsdl file to other scenario
Hi...
I have done one scenario like giving
Input File: Fname,Lname,Address
Output file: FullName,address.
using BPM.
After doing the sceanrio i have generated the wsdl file. I have tested the wsdl file using infopath.It is working fine.
Then i have done anothe scenario like File_webservice_File sceanrio. In this scenario, i have used the wsdl file which i have generated before using BPM. while executng the scenario, output is not coming. i have used 2 receiver communication channels for soap and for file.For soap, i have given the target url and soap action of the wsdl file which i have generated.In moni i can see the 3 messages. for one message it is showing checked flag, but for other 2 messages, it is not showing any flag. Can you please tell, where i have done wrong.Hi Leelaratnam,
try to refresh the queue ie SMQ1 and SMQ2 and even referesh the cache
chk for this links
RFC -> XI -> WebService - A Complete Walkthrough (Part 1)
RFC -> XI -> WebService - A Complete Walkthrough (Part 2)
Aspirant to learn SAP XI...You won the Jackpot if you read this!-Part III
Thanx
Sampath -
Cannot generate WSDL file with wscompile
I get an error while generating the WSDL file using wscompile tool.
my compile line is "wscompile -gen:server CRAWS.xml -keep" and I get a RmiModeler error with an ClassNotFoundException .
I have put my jar file in the bin folder (same folder of wscompile) and I've also copied my service build files in the same folder (under the package subfolders).
Here is the code of the xml configuration:
<?xml version="1.0" encoding="UTF-8"?>
<configuration xmlns="http://java.sun.com/xml/ns/jax-rpc/ri/config">
<service name="CraWS_Service" targetNamespace="urn:com.servepath.cra/wsdl/CraService"
typeNamespace="urn:com.servepath.cra/types/CraService"
packageName="com.servepath.CraWebService">
<interface name="com.servepath.CraWebService.CraWSIF" servantName="com.servepath.CraWebService.CraWS_Impl"/>
</service>
</configuration>I'm new to Web Services so I'm just guessing, but perhaps you need to add -classpath lib/foo.jar;lib/bar.jar to specify where your class-files are.
Maybe you are looking for
-
Safari finds web pages but pages are shown grey and they are not active...
... It is not possible to choose any links and fields at opened web pages or scroll them. Safari icons in the upper left corner dont work i.e. it is not possible to close or choose from opened web pages or bookmarks. It is only possible to write to w
-
Multi plot graph - auxiliary curves
I am in trouble with a multi plot graph. There is a wave chart that I have to plot an auxiliary line when the user clicks on the graphic. I know how to get the initial point and the final point of the auxiliar line. But I don´t know how can I plot th
-
Can a eprint printer be hooked up to a Chromebook directly and if so, how?
Can a HP Photosmart 5520e All-in-one printer be hooked up to a Chromebook directly and if so, How? Please
-
I upgraded my iPad to iOS 7. Enabling can not do it.
i upgraded my iPad to iOS 7. Enabling can not do it.
-
ITunes crash on music folder import
Did an erase & reinstall on my G5. Saved music files (iTunes Music) on external drive. Dragging and dropping that music files folder (iTunes Music) into a newly installed, updated & empty iTunes library tab. Copying of files executes until approx 50%