Problems to run BPEL process with console

Hi,
I deployed different BPEL samples / demos in the Process Manager, e.g. LoanFlowPlus, StarLoan, CreditRatingService, UnitedLoan
Whatever process instance I am trying to run and view with the visual flow, I get a emty error message window "Exception" with an X that would never close.
There is no specified error message.
Futhermore it is not possible to delete / undeploy processes.
Thank you for help

Hi,
I know I've seen this problem with Firefox. I'm not sure of the exact list of browsers that are supported, but I know that IE works well. Firefox seems to work fine, until you try and view the audit trail.
Catherine

Similar Messages

Error while running BPEL Process with Oracle Apps Adapter.

Hi All,
I am trying to configure the oracle apps adapter in JDeveloper.
Here my EBS is running on different database where as SOA is installed on different database.
I am able to properly configure the adapter & deploy the process to weblogic server.
But when I am trying to run the process I am getting following errorr.
<p>
The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510\nJCA Resource Adapter location error.\nUnable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/>\nThe JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='*<JNDI Name passed in Oracle apps Adapter.>*'.\nThe reason for this is most likely that either \n 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or \n 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to <JNDI Name passed in Oracle apps Adapter.>
</p>
Please suggest the solution for the same.
its really urgent . waiting for reply.
Edited by: aumathe on Dec 16, 2010 2:33 PM

Have you created a connection pool with the JNDI specified while configuring adapter in Oracle Apps adapter on weblogic admin console. You should create it at Deployments --> OracleAppsAdapter --> Configuration--> Outbound Connection pools
Make sure to update the adapter after creating a connection pool so that changes can take effect.
Regards,
Anuj

Invoke BPEL process with the webservice interface

I'm using Oracle BPEL PM 10.1.2.x.
Follow the example comes with the BPEL PM, i can invoke the BPEL process in a J2EE project (with the webservice interface). The example named "UseStockReviewSheet".
Then i tried to invoke the BPEL process i designed with Eclipse BPEL Designer. The version of BPEL designer for Eclipse is 0.9.13.
I failed and got following errors:
09/03/17 16:55:53 com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.
xmlsoap.org/ws/2003/03/business-process/}selectionFailure}
messageType: {null}
parts: {{summary=<summary>变量/表达式结果为空.
尝试读取/复制第 50 行的 xpath 变量/表达式 "bpws:getVariableData('input','payload
','/tns:CreditFlowRequest/tns:input')" 时, 发现为空。.
请确保变量/表达式结果 "bpws:getVariableData('input','payload','/tns:CreditFlowRe
quest/tns:input')" 非空。.
</summary>}}
09/03/17 16:55:53 at com.collaxa.cube.engine.ext.wmp.BPELAssignWMP.checkEx
pressionFromValue(BPELAssignWMP.java:972)
09/03/17 16:55:53 at com.collaxa.cube.engine.ext.wmp.BPELAssignWMP.evalFro
mValue(BPELAssignWMP.java:504)
09/03/17 16:55:53 at com.collaxa.cube.engine.ext.wmp.BPELAssignWMP.__execu
teStatements(BPELAssignWMP.java:122)
09/03/17 16:55:53 at com.collaxa.cube.engine.ext.wmp.BPELActivityWMP.perfo
rm(BPELActivityWMP.java:188)
09/03/17 16:55:53 at com.collaxa.cube.engine.CubeEngine.performActivity(Cu
beEngine.java:3408)
09/03/17 16:55:53 at com.collaxa.cube.engine.CubeEngine.handleWorkItem(Cub
eEngine.java:1836)
09/03/17 16:55:53 at com.collaxa.cube.engine.dispatch.message.instance.Per
formMessageHandler.handleLocal(PerformMessageHandler.java:75)
09/03/17 16:55:53 at com.collaxa.cube.engine.dispatch.DispatchHelper.handl
eLocalMessage(DispatchHelper.java:166)
09/03/17 16:55:53 at com.collaxa.cube.engine.dispatch.DispatchHelper.sendM
emory(DispatchHelper.java:252)
09/03/17 16:55:53 at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEng
ine.java:5438)
09/03/17 16:55:53 at com.collaxa.cube.engine.CubeEngine.createAndInvoke(Cu
beEngine.java:1217)
09/03/17 16:55:53 at com.collaxa.cube.engine.delivery.DeliveryService.hand
leInvoke(DeliveryService.java:511)
09/03/17 16:55:53 at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.han
dleInvoke(CubeDeliveryBean.java:335)
09/03/17 16:55:53 at ICubeDeliveryLocalBean_StatelessSessionBeanWrapper16.
handleInvoke(ICubeDeliveryLocalBean_StatelessSessionBeanWrapper16.java:1796)
09/03/17 16:55:53 at com.collaxa.cube.engine.dispatch.message.invoke.Invok
eInstanceMessageHandler.handle(InvokeInstanceMessageHandler.java:37)
09/03/17 16:55:53 at com.collaxa.cube.engine.dispatch.DispatchHelper.handl
eMessage(DispatchHelper.java:125)
09/03/17 16:55:53 at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.
process(BaseScheduledWorker.java:70)
09/03/17 16:55:53 at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage
(WorkerBean.java:86)
09/03/17 16:55:53 at com.evermind.server.ejb.MessageDrivenBeanInvocation.r
un(MessageDrivenBeanInvocation.java:123)
09/03/17 16:55:53 at com.evermind.server.ejb.MessageDrivenHome.onMessage(M
essageDrivenHome.java:755)
09/03/17 16:55:53 at com.evermind.server.ejb.MessageDrivenHome.run(Message
DrivenHome.java:928)
09/03/17 16:55:53 at com.evermind.util.ReleasableResourcePooledExecutor$My
Worker.run(ReleasableResourcePooledExecutor.java:186)
09/03/17 16:55:53 at java.lang.Thread.run(Thread.java:534)
<2009-03-17 16:55:53,640> <ERROR> <default.collaxa.cube.xml> com.oracle.bpel.cli
ent.BPELFault: faultName: {{http://schemas.xmlsoap.org/ws/2003/03/business-proce
ss/}selectionFailure}
messageType: {null}
parts: {{summary=<summary>变量/表达式结果为空.
尝试读取/复制第 50 行的 xpath 变量/表达式 "bpws:getVariableData('input','payload
','/tns:CreditFlowRequest/tns:input')" 时, 发现为空。.
请确保变量/表达式结果 "bpws:getVariableData('input','payload','/tns:CreditFlowRe
quest/tns:input')" 非空。.
</summary>}}
I can invoke my BPEL process in BPEL console, not in J2EE project. bpws:getVariableData('input','payload','/tns:CreditFlowRequest/tns:input')" is null.
The error message contains some Chineses word. I'm new to BPEL, hope someone can give me a hint on how to solve this problem.
Thanks a billion!
--Sunny 2009-3-18

Following is the java class invoking BPEL process with the webservice interface.
package com.otn.samples;
import javax.xml.namespace.QName;
import javax.xml.rpc.JAXRPCException;
import javax.xml.rpc.ParameterMode;
import javax.xml.rpc.Service;
import javax.xml.rpc.ServiceException;
import javax.xml.rpc.ServiceFactory;
import javax.xml.rpc.encoding.XMLType;
import javax.xml.rpc.soap.SOAPFaultException;
import org.apache.axis.client.Call;
* @version 2.0 $Date: 07-mar-2005.05:07:45 $
* @author Copyright (c) 2004 by Oracle. All Rights Reserved.
public class CreditFlowClient
private static QName SERVICE_NAME;
private static QName PORT_TYPE;
private static QName OPERATION_NAME;
private static String SOAP_ACTION;
private static String STYLE;
private static String THIS_NAMESPACE = "http://samples.otn.com";
private static String PARAMETER_NAMESPACE = "http://samples.otn.com";
private String location;
static
SERVICE_NAME = new QName(THIS_NAMESPACE,"CreditFlow");
PORT_TYPE = new QName(THIS_NAMESPACE,"CreditFlow") ;
OPERATION_NAME = new QName(THIS_NAMESPACE,"creditFlowRequest");
SOAP_ACTION = "initiate";
STYLE = "wrapped";
public void setLocation(String location)
this.location = location;
public void initiate(String ssn)
try
/* Create Service and Call object */
ServiceFactory serviceFactory = ServiceFactory.newInstance();
Service service = serviceFactory.createService( SERVICE_NAME );
Call call = (Call)service.createCall( PORT_TYPE );
/* Set all of the stuff that would normally come from WSDL */
call.setTargetEndpointAddress( location );
call.setProperty(Call.SOAPACTION_USE_PROPERTY, Boolean.TRUE);
call.setProperty(Call.SOAPACTION_URI_PROPERTY, SOAP_ACTION);
call.setProperty( Call.OPERATION_STYLE_PROPERTY , STYLE );
call.setOperationName(OPERATION_NAME);
call.addParameter(new QName(PARAMETER_NAMESPACE,"ssn"), XMLType.XSD_STRING, ParameterMode.IN);
Object[] params = new Object[1];
params[0] = ssn;
/* Invoke the service */
call.invokeOneWay(params);
System.out.println( "CreditFlow BPEL process initiated" );
catch (SOAPFaultException e)
System.err.println("Generated fault: ");
System.out.println (" Fault Code = " + e.getFaultCode());
System.out.println (" Fault String = " + e.getFaultString());
catch (JAXRPCException e)
System.err.println("JAXRPC Exception: " + e.getMessage());
catch (ServiceException e)
System.err.println("Service Exception: " + e.getMessage());
public static void main(String[] args)
String ssn = "12-123-126";
String location = "http://localhost:9700/orabpel/default/CreditFlow";
CreditFlowClient client = new CreditFlowClient();
if(args.length == 1)
ssn = args[0];
else if(args.length ==2)
location = args[0];
ssn = args[1];
client.setLocation( location );
client.initiate( ssn );
-------------------------------------------------------------------

Checking for status of a long-running BPEL process

Hi experts,
I have one BPEL process for originating customers' loan which usually involves various steps which takes around 15-20 mins to complete per instance. I would like to implement a user interface that can check the process's progress and display how it is going to the user.
I have thought of using an asynchronous process that updates a global variable listing status of each step inside the process and use a poller to invoke another operation (like "checkStatus" operation) of this process to retrieve this variable and display the value to the users. It may be achieved by using "OnEvent" activity waiting for "checkStatus" operation. It will run in parallel with the main process, have access to the global variable and reply this variable immediately to the caller.
It sounds like an idea in theory but invoking a web service operation for polling status is very heavy-weight and may impact performance during high-load.
I am just wondering if there is other solution to this problem as I believe the status checking is a very common expected requirement in long-running BPEL process. What might be the best practice to implement this?
Look forward to your responses.
Thanks and regards,
Edited by: Nghia Pham on Nov 5, 2012 4:48 PM

Hi.
I apologize for the slow reply. I am just back from overseas and did not have chance to go to the forum!
Thank you a lot for your responses!
The BAM looks like a suggested out-of-the-box solution. But it ties too much to Oracle API and will be hard to customise the way you want to interpret the status to end-users. If you want to display the process status with BAM in a web application interface, ADF is the only solution (please correct me if I am wrong). I would prefer a stand-alone, free of proprietary API solution so that we can build a screen that is technology-independent. As ADF UI is not our only supported view technology. For example, a PHP web client should be able to interpret the BPEL process status.
Will really appreciate your suggested solution.
Thanks and regards,

Undeploying BPEL Process with ant

Hello,
I am trying to undeploy BPEL Process with the ANT Script. I did not wrote it by myself but got it as a sample from
http://blogs.oracle.com/rammenon/2007/11/26/#a74 with the admintasks.jar as well.
Unfortunately, when I try to undeploy , I recieved following exception:
java.rmi.UnmarshalException: Error deserializing return-value: java.io.InvalidClassException: com.oracle.bpel.client.BPELDomainHandle; local class incompatible: stream classdesc serialVersionUID = -6384534326625967840, local class serialVersionUID = -8310067783665200608
at com.evermind.server.rmi.RMIClientConnection.handleMethodInvocationResponse(RMIClientConnection.java:843)
at com.evermind.server.rmi.RMIClientConnection.handleOrmiCommandResponse(RMIClientConnection.java:287)
at com.evermind.server.rmi.RMIClientConnection.dispatchResponse(RMIClientConnection.java:242)
at com.evermind.server.rmi.RMIClientConnection.processReceivedCommand(RMIClientConnection.java:224)
at com.evermind.server.rmi.RMIConnection.handleCommand(RMIConnection.java:152)
at com.evermind.server.rmi.RMIConnection.listenForOrmiCommands(RMIConnection.java:127)
at com.evermind.server.rmi.RMIConnection.run(RMIConnection.java:107)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:814)
at java.lang.Thread.run(Thread.java:595)
INFO: Failed to undeploy BPEL processes. - Error deserializing return-value: java.io.InvalidClassException: com.oracle.bpel.client.BPELDomainHandle; local class incompatible: stream classdesc serialVersionUID = -6384534326625967840, local class serialVersionUID = -8310067783665200608
Did somebody face with this problem and can help me out?
I am using Oracle SOA Suite 10.1.3.3.0
Thanks,
Denis

Thanks for your advise. I have visited your blog and tryed to undeploy my BPEL Process via <undeployBPELProcess> task. But I get: "failed to create task or type of type: undeployBPELProcess. Cause: The Name is undefined" error. So I guess I don't have a proper jar file.
I am very short on experience with Oracle SOA Suite, so I got stuck with this issue.
Denis

Error in running BPEL process

Hi,
I m new to the BPEL. I designed one BPEL process with one partner link. it compiled successfully and got deployed successfully too. But when i m trying to run it thru BPEL Console web app. it is showing error as invalid WSDL or Can not find WSDL location.
Plz help me out.

sounds like a proxy issue/ is there a proxy between the bpel server and the service (or the service should be accessed w/o proxy?)
check out the obsetenv.bat/sh file - which sets up the enviroment ..
hth clemens

Cannot deploy BPEL process with SSO to BPELConsole activated

I cannot deploy BPEL process with SSO to BPELConsole activated. Here is the error I get from JDeveloper (sorry for the french error message):
Problème détecté lors de la connexion au serveur "ssdvoiagu.dev.local.csst.qc.ca" sur le port "7781" : java.security.AccessControlException: access denied (com.collaxa.security.DomainPermission generique read)
at java.security.AccessControlContext.checkPermission(AccessControlContext.java:264)
at java.security.AccessController.checkPermission(AccessController.java:427)
at com.collaxa.security.OC4JSecurityService.checkAccess(OC4JSecurityService.java:16)
at com.collaxa.security.SecurityService.checkDomainAccess(SecurityService.java:26)
at com.collaxa.cube.fe.util.ServletUtils.getLocatorWithoutUrlRewrite(ServletUtils.java:162)
at deployHttpClientProcess.jspService(_deployHttpClientProcess.java:332)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Target BPEL process manager runs under SOA 10.1.3.3. When the SSO to BPELConsole is disabled, the deployment works just fine. Is there any way to make it work with SSO?

Please check:
http://blog.jpoot.com/category/oracle-appserver/oid-ldap/
We had some issues with SSO and SSL but everything is running now.
Marc

Issue about Invoking a BPEL Process with the Generic Java API

I Invoking a BPEL Process with the Generic Java API and apache axis or axis2
it turn up a error as follow:
org.apache.axis2.AxisFault: ORABPEL-08021
Cannot find partner wsdl.
parnterLink "BPELProcess1" is not found in process "BPELProcess1" (revision "v2008_11_17__38943").
Please check the deployment descriptor of the process to find the correct partnerLink name.
     at org.apache.axis2.util.Utils.getInboundFaultFromMessageContext(Utils.java:512)
     at org.apache.axis2.description.OutInAxisOperationClient.handleResponse(OutInAxisOperation.java:370)
     at org.apache.axis2.description.OutInAxisOperationClient.send(OutInAxisOperation.java:416)
     at org.apache.axis2.description.OutInAxisOperationClient.executeImpl(OutInAxisOperation.java:228)
     at org.apache.axis2.client.OperationClient.execute(OperationClient.java:163)
     at org.apache.axis2.client.ServiceClient.sendReceive(ServiceClient.java:548)
     at org.apache.axis2.client.ServiceClient.sendReceive(ServiceClient.java:528)
     at wf.Test_axis2_callws.main(Test_axis2_callws.java:41)
i can't solve it !
what's problem ???
anyone use java code to invoke bpel process successfully..can show me some example?
thanks
chan

Hi,
Check below link may help you solve your problem.
http://www.activevos.com/cec/samples/content/sample-invoke/doc/index.html
Regards

How to start BPEL process with publishing initiation form designed in ADF

Hii All,
Can Anyone please tell me how to Start my BPEL process with publishing initiation forms designed in ADF fusion.
I am using JDevloper 11g and Oracle SOASuite 11g toolset in windows platform.
Thankx in Advance,
Deekay.

Hi,
I assume you mean the JMS example under the $OH BPEL examples area. Unfortunately, this only shows how to get a BPEL process kicked off by awaiting a JMS message - but there is no test code there! There are specific examples which show off the testing framework facilities but it appears that all the examples which use async type of interactions are in the middle of a process which is kicked off by a normal synchronous client interaction.
Any further help much appreciated.
Colin.

Securing a BPEL Process with username/password in 10g

securing a BPEL Process with username/password in 10g

use OWSM gateways..
create a gateway and define your policy in the gateway

Restart of SOA Suite server = Manually restart all running BPEL processes?

Hi,
Is it true that in SOA Suite 10.1.3 you have to manually restart all running BPEL process if you restart the SOA Suite? And that this was working in 10.1.2?
If it is true, how do people handle that? We might have thousands of processes waiting in Waiting state on the server so this sounds like a nightmare. :-)
Regards Pete

Yes, I was a bit surprised too, that is why I am asking. :-) I was a colleague that told me that it was not working in 10.1.3. But I should just go and check it out.
Regards Pete

Error shown in console while running BPEL process

We have built one BPEL process that creates AR invoices in Oracle Apps from a legacy system. While deploying the process it deploys without Error, but when viewing the process through BPEL Console by clicking the instance it throws Below ERROR -- "java.rmi.RemoteException: No Exception - originate from:java.lang.Exception: No Exception - originate from:; nested exception is:
java.lang.Exception: No Exception - originate from:"
We have increased <transaction-config timeout="90000"/> residing in Oracle_Home\integration\orabpel\system\appserver\oc4j\j2ee\home\server.xml file. but still the Error remains same....
Any help will be appreciated.
Regards,
Suman

Have you created a connection pool with the JNDI specified while configuring adapter in Oracle Apps adapter on weblogic admin console. You should create it at Deployments --> OracleAppsAdapter --> Configuration--> Outbound Connection pools
Make sure to update the adapter after creating a connection pool so that changes can take effect.
Regards,
Anuj

Problem in invoking a BPEL process with complex input

Hi,
I have an asynchronous BPEL process which has a complex request schema. When I try to invoke the process through BPEL Console, it works properly. But when invoking it through Java API, it seems that the input soap message is not well received by the process. Here are relevant files:
*==============-BPEL file==================*
<?xml version = "1.0" encoding = "UTF-8" ?>
<process name="MapCopyProject"
targetNamespace="http://mapcopyservices/"
xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:taskservice="http://xmlns.oracle.com/bpel/workflow/taskService"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:task="http://xmlns.oracle.com/bpel/workflow/task"
xmlns:ids="http://xmlns.oracle.com/bpel/services/IdentityService/xpath"
xmlns:wfcommon="http://xmlns.oracle.com/bpel/workflow/common"
xmlns:ehdr="http://www.oracle.com/XSL/Transform/java/oracle.tip.esb.server.headers.ESBHeaderFunctions"
xmlns:ns4="http://mapcopyservices/"
xmlns:ns3="http://mapcopyservices/types/"
xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
xmlns:ldap="http://schemas.oracle.com/xpath/extension/ldap"
xmlns:ora="http://schemas.oracle.com/xpath/extension"
xmlns:hwf="http://xmlns.oracle.com/bpel/workflow/xpath"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
xmlns:orcl="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc"
xmlns:wf="http://schemas.oracle.com/bpel/extension/workflow">

<partnerLinks>
<partnerLink name="MapCheckService" partnerLinkType="ns4:MapCheckService_PL"
partnerRole="MapCheckService_Role"/>
<partnerLink myRole="TotalBPELProcessProvider" name="TotalBPELProcess"
partnerRole="TotalBPELProcessRequester"
partnerLinkType="ns4:TotalBPELProcess"/>
<partnerLink name="MapActionService" partnerRole="MapActionService_Role"
partnerLinkType="ns4:MapActionService_PL"/>
</partnerLinks>
<variables>
<variable name="ClientInput"
messageType="ns4:TotalBPELProcessRequestMessage"/>
<variable name="ClientOutput"
messageType="ns4:TotalBPELProcessResponseMessage"/>
<variable name="CheckSourceExistance_Output"
messageType="ns4:MapCheckService_checkSourceExistanceResponse"/>
<variable name="CheckSourceExistance_Input"
messageType="ns4:MapCheckService_checkSourceExistance"/>
<variable name="GetCoordinateSystemType_Output"
messageType="ns4:MapCheckService_getCoordinateSystemTypeResponse"/>
<variable name="GetCoordinateSystemType_Input"
messageType="ns4:MapCheckService_getCoordinateSystemType"/>
<variable name="CheckSourceExistance2_Input"
messageType="ns4:MapCheckService_checkSourceExistance"/>
<variable name="CheckSourceExistance2_Output"
messageType="ns4:MapCheckService_checkSourceExistanceResponse"/>
<variable name="InvokeMapAction_Input"
messageType="ns4:MapActionService_CopyAndTransform"/>
<variable name="InvokeMapAction_Output"
messageType="ns4:MapActionService_CopyAndTransformResponse"/>
</variables>


<sequence name="main">
<receive name="ReceiveInput" partnerLink="TotalBPELProcess"
portType="ns4:TotalBPELProcessInvoke" operation="initiate"
variable="ClientInput" createInstance="yes"/>
<flow name="Flow_1">
<sequence name="Sequence_1">
<assign name="Assign_3">
<copy>
<from variable="ClientInput" part="parameters"
query="/ns3:TotalBPELProcessRequest/ns3:destConn"/>
<to variable="CheckSourceExistance2_Input" part="parameters"
query="/ns3:checkSourceExistanceElement/ns3:MapConnection_1"/>
</copy>
</assign>
<invoke name="Invoke_CheckSource2" partnerLink="MapCheckService"
portType="ns4:MapCheckService" operation="checkSourceExistance"
inputVariable="CheckSourceExistance2_Input"
outputVariable="CheckSourceExistance2_Output"/>
</sequence>
<sequence name="Sequence_1">
<assign name="Assign_1">
<copy>
<from variable="ClientInput" part="parameters"
query="/ns3:TotalBPELProcessRequest/ns3:sourceConn"/>
<to variable="CheckSourceExistance_Input" part="parameters"
query="/ns3:checkSourceExistanceElement/ns3:MapConnection_1"/>
</copy>
</assign>
<invoke name="Invoke_CheckSource" partnerLink="MapCheckService"
portType="ns4:MapCheckService" operation="checkSourceExistance"
inputVariable="CheckSourceExistance_Input"
outputVariable="CheckSourceExistance_Output"/>
</sequence>
</flow>
<switch name="CheckSourceAndDest">
<case condition="string(bpws:getVariableData('CheckSourceExistance_Output','parameters','/ns3:checkSourceExistanceResponseElement/ns3:result'))='true' and string(bpws:getVariableData('CheckSourceExistance2_Output','parameters','/ns3:checkSourceExistanceResponseElement/ns3:result'))='true'">
<empty name="Empty_1"/>
</case>
<otherwise>
<terminate name="Terminate_1"/>
</otherwise>
</switch>
<assign name="Assign_4">
<copy>
<from variable="ClientInput" part="parameters"
query="/ns3:TotalBPELProcessRequest/ns3:sourceConn"/>
<to variable="GetCoordinateSystemType_Input" part="parameters"
query="/ns3:getCoordinateSystemTypeElement/ns3:MapConnection_1"/>
</copy>
</assign>
<invoke name="Invoke_GetCoSysType" partnerLink="MapCheckService"
portType="ns4:MapCheckService" operation="getCoordinateSystemType"
inputVariable="GetCoordinateSystemType_Input"
outputVariable="GetCoordinateSystemType_Output"/>
<switch name="CheckPossibility">
<case condition="number(bpws:getVariableData('GetCoordinateSystemType_Output','parameters','/ns3:getCoordinateSystemTypeResponseElement/ns3:result'))=number(bpws:getVariableData('ClientInput','parameters','/ns3:TotalBPELProcessRequest/ns3:transformMapType'))">
<empty name="Empty_2"/>
</case>
<otherwise>
<terminate name="Terminate_2"/>
</otherwise>
</switch>
<assign name="Assign_7">
<copy>
<from variable="ClientInput" part="parameters"
query="/ns3:TotalBPELProcessRequest/ns3:sourceConn"/>
<to variable="InvokeMapAction_Input" part="parameters"
query="/ns3:CopyAndTransformElement/ns3:sourceConn"/>
</copy>
<copy>
<from variable="ClientInput" part="parameters"
query="/ns3:TotalBPELProcessRequest/ns3:destConn"/>
<to variable="InvokeMapAction_Input" part="parameters"
query="/ns3:CopyAndTransformElement/ns3:destConn"/>
</copy>
<copy>
<from variable="ClientInput" part="parameters"
query="/ns3:TotalBPELProcessRequest/ns3:transformMapType"/>
<to variable="InvokeMapAction_Input" part="parameters"
query="/ns3:CopyAndTransformElement/ns3:transformMapType"/>
</copy>
</assign>
<invoke name="Invoke_MapAction" partnerLink="MapActionService"
portType="ns4:MapActionService" operation="CopyAndTransform"
inputVariable="InvokeMapAction_Input"
outputVariable="InvokeMapAction_Output"/>
<assign name="Assign_6">
<copy>
<from variable="InvokeMapAction_Output" part="parameters"
query="/ns3:CopyAndTransformResponseElement/ns3:result"/>
<to variable="ClientOutput" part="parameters"
query="/ns3:TotalBPELProcessResponse/ns3:result"/>
</copy>
</assign>
<invoke name="Invoke_CallBack" partnerLink="TotalBPELProcess"
portType="ns4:TotalBPELProcessCallback" operation="onResult"
inputVariable="ClientOutput"/>
</sequence>
</process>
*==================WSDL file of process invoke port================*
<definitions
name="TotalBPELProcess"
targetNamespace="http://mapcopyservices/"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://mapcopyservices/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
xmlns:tns0="http://mapcopyservices/types/"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
>
<types>
<schema xmlns="http://www.w3.org/2001/XMLSchema" targetNamespace="http://mapcopyservices/types/"
elementFormDefault="qualified" xmlns:tns="http://mapcopyservices/types/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:soap11-enc="http://schemas.xmlsoap.org/soap/encoding/">
<complexType name="MapConnection">
<sequence>
<element name="layerName" type="string" nillable="true"/>
<element name="connString" type="string" nillable="true"/>
<element name="mapType" type="int"/>
</sequence>
</complexType>
<element name="TotalBPELProcessRequest">
<complexType>
<sequence>
<element name="sourceConn" type="tns:MapConnection" nillable="true"/>
<element name="destConn" type="tns:MapConnection" nillable="true"/>
<element name="transformMapType" type="int"/>
</sequence>
</complexType>
</element>
<element name="TotalBPELProcessResponse">
<complexType>
<sequence>
<element name="result" type="int"/>
</sequence>
</complexType>
</element>
</schema>
</types>
<message name="TotalBPELProcessRequestMessage">
<part name="parameters" element="tns0:TotalBPELProcessRequest"/>
</message>
<message name="TotalBPELProcessResponseMessage">
<part name="parameters" element="tns0:TotalBPELProcessResponse"/>
</message>
     <portType name="TotalBPELProcessInvoke">
          <operation name="initiate">
               <input message="tns:TotalBPELProcessRequestMessage"/>
          </operation>
     </portType>
     
     <portType name="TotalBPELProcessCallback">
          <operation name="onResult">
               <input message="tns:TotalBPELProcessResponseMessage"/>
          </operation>
     </portType>
     <plnk:partnerLinkType name="TotalBPELProcess">
          <plnk:role name="TotalBPELProcessProvider">
               <plnk:portType name="tns:TotalBPELProcessInvoke"/>
          </plnk:role>
          <plnk:role name="TotalBPELProcessRequester">
               <plnk:portType name="tns:TotalBPELProcessCallback"/>
          </plnk:role>
     </plnk:partnerLinkType>
</definitions>
*===================JSP invoking file=====================*
<%@ page contentType="text/html;charset=windows-1252"%>
<%@page import="java.util.Map" %>
<%@page import="com.oracle.bpel.client.Locator" %>
<%@page import="com.oracle.bpel.client.NormalizedMessage" %>
<%@page import="com.oracle.bpel.client.delivery.IDeliveryService" %>
<%@page import="java.util.*" %>
<%@ page import="javax.naming.Context" %>
<%@ page import="javax.naming.InitialContext" %>
<%@ page import="javax.naming.NamingException" %>
<%@ page import="javax.rmi.PortableRemoteObject" %>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252"/>
<title>CopyMap</title>
</head>
<body>
     <%
try{
     String xml =
"<ns100:TotalBPELProcessRequest xmlns:ns100=\"http://mapcopyservices/types/\">"+
"<ns100:sourceConn>"+
"<ns100:layerName>1</ns100:layerName>"+
"<ns100:connString>1</ns100:connString>"+
"<ns100:mapType>1</ns100:mapType>"+
"</ns100:sourceConn>"+
"<ns100:destConn>"+
"<ns100:layerName>1</ns100:layerName>"+
"<ns100:connString>1</ns100:connString>"+
"<ns100:mapType>1</ns100:mapType>"+
"</ns100:destConn>"+
"<ns100:transformMapType>1</ns100:transformMapType>"+
"</ns100:TotalBPELProcessRequest>";
Hashtable jndi = new Hashtable();
jndi.put(Context.PROVIDER_URL, "opmn:ormi://amir:6003:oc4j_soa/orabpel");
jndi.put(Context.INITIAL_CONTEXT_FACTORY, "oracle.j2ee.rmi.RMIInitialContextFactory");
jndi.put(Context.SECURITY_PRINCIPAL, "oc4jadmin");
jndi.put(Context.SECURITY_CREDENTIALS, "as123456");
Locator locator = new Locator("default","as123456",jndi);
     IDeliveryService deliveryService =
          (IDeliveryService)locator.lookupService
          (IDeliveryService.SERVICE_NAME );
     NormalizedMessage nm = new NormalizedMessage( );
     nm.addPart("payload", xml );
deliveryService.post("MapCopyProject", "initiate", nm);
     out.println( "BPELProcess MapCopyProject initiated!<br>" );
catch(Exception ex){
out.println(ex.getMessage());
ex.printStackTrace();
     %>
</body>
</html>
*===================================*
Error occurs in first assign activity like this:
*=========*
Error in evaluate <from> expression at line "97". The result is empty for the XPath expression : "/ns3:TotalBPELProcessRequest/ns3:sourceConn".
*=========*
Please tell me if you know how to solve it. Thanks

It sounds very much like a namespace issue.
As it works from the BPELConsole, fill in the values in the BPELConsole initiate page and switch from the HTML to the XML view. Copy the XML to Notepad or another suitable editor; then insert it as fixed values into the Java/JSP code and try to call the server with the hardcoded payload instead of the one you are generating.
You can also save the payload in the JSP (write it to a file or standard output) before the call; then open it in jDeveloper or Eclipse and validate it against the schema. That way you will find if the XML is invalid.
Also, check the flow in the BPELConsole. As it fails on an XPath expression you must have a process. If you click on the receive activity you can see the received payload. Again, copy that to jDeveloper or Eclipse and validate it. Also compare it to the XML you get if you initiate the process manuallly. There must be some difference.
If you still can't get it to work, post the XML from the initiate operation and from the JSP operation (as they are seen in the receive activity) and we can help you check them out!

Problem in invoking BPEL Process through JSP

Hi ,
I have created a simple BPEL asynchronous process called as " BPELProcessAddMacroTask" .
JSP File looks like :
<%@page import="com.oracle.bpel.client.Locator" %>
<%@page import="com.oracle.bpel.client.NormalizedMessage" %>
<%@page import="com.oracle.bpel.client.dispatch.IDeliveryService" %>
<html>
<head>
<title>Invoke AddMacro Task</title>
</head>
<body>
<%
String EmployeeId = request.getParameter("EmployeeId");
if (EmployeeId == null)
%>

<h3>Invoke AddMacro Task BPEL Application</h3>
<h4>Add Macro Task Form</h4>
<form>
<table>
<tr>
<td>EmployeeId:</td>
<td><input type="text" name="EmployeeId" value="43"></td>
</tr>
<tr>
<td>TaskName</td>
<td><input type="text" name="MacroTaskName" value="DIMPLETTE_EXAMPLE"></td>
</tr>
<input type="submit" value="Send Input">
</form>
<%
else
// 1. Get form fields
//String EmployeeId = request.getParameter("EmployeeId");
String MacroTaskName = request.getParameter("MacroTaskName");
// 2. Create loan application XML document
String xml = "<AddMacroTask xmlns=\"http://xmlns.oracle.com/BPELProcessAddMacroTask\">"
+ "<EmployeeId>" + EmployeeId + "</EmployeeId>"
+ "<MacroTaskName>" + MacroTaskName + "</MacroTaskName>" ;
// 3. Initiate the BPEL process here
Locator locator = new Locator("default","bpel");
IDeliveryService deliveryService = (IDeliveryService)
locator.lookupService(IDeliveryService.SERVICE_NAME );
// Construct a normalized message and send to Oracle BPEL Process Manager
NormalizedMessage nm = new NormalizedMessage();
nm.addPart("payload", xml);
// Initiate the BPEL process
deliveryService.post("BPELProcessAddMacroTask", "initiate", nm);
%>
<p>BPEL Process <code>BPELProcessAddMacroTask</code> initiated
with the input containing EmployeeId=<%= EmployeeId %></p>
<p>Please refer to the
BPEL Console
to see the status of the initiated AddMacroTask BPEL Process.</p>
<%
%>
<body>
</html>
I am not finding my " addmacrotask.jsp" in home.jsp even after running "Obant" command .
I am getting following error when try to invoke the web service :
My UI Path is : http://localhost:9700/InvokingProcessesUI/addmacrotask.jsp
I am getting this error :
Exception Message:
[java.lang.Exception] Invalid Login. Domain not specified.
Exception Trace:
java.lang.Exception: Invalid Login. Domain not specified. at com.collaxa.cube.fe.util.ServletUtils.getLocator(ServletUtils.java:80) at displayInstance.jspService(_displayInstance.java:88) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:350) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65) at com.collaxa.cube.fe.DomainFilter.doFilter(DomainFilter.java:103) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:285) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:126) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186) at java.lang.Thread.run(Thread.java:534)
Please someone help me out with this problem .
Thanks
Deepika

Hi ,
I have set it to this in server.xml :
<application name="orabpel" path="../../../BC4J/redist/bc4j.ear" auto-start="true" />
<application name="BPELProcessAddMacroTask" path="D:\BPEL\integration\orabpel\system\appserver\oc4j\j2ee\home\applications\InvokingProcessesUI.ear" parent="orabpel" auto-start="true" />
</application-server>
But still not able to create instance . Same problem persists.
Thanks
Deepika

Problems in invoking BPEL process

Hi there,
I created with JDeveloper the following BPEL process :
<?xml version = "1.0" encoding = "UTF-8" ?>
<process name="ProvaBPEL" targetNamespace="http://xmlns.oracle.com/ProvaBPEL"
xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
xmlns:ns1="http://www.research.ibm.com/wsla"
xmlns:ldap="http://schemas.oracle.com/xpath/extension/ldap"
xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
xmlns:client="http://xmlns.oracle.com/ProvaBPEL"
xmlns:ora="http://schemas.oracle.com/xpath/extension"
xmlns:orcl="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc">
<partnerLinks>

<partnerLink name="client" partnerLinkType="client:ProvaBPEL"
myRole="ProvaBPELProvider"/>
</partnerLinks>
<variables>

<variable name="inputVariable"
messageType="client:ProvaBPELRequestMessage"/>

<variable name="outputVariable"
messageType="client:ProvaBPELResponseMessage"/>
</variables>
<sequence name="main">

<receive name="receiveInput" partnerLink="client"
portType="client:ProvaBPEL" operation="process"
variable="inputVariable" createInstance="yes"/>

<assign name="Assign_1">
<copy>
<from variable="inputVariable" part="payload"/>
<to variable="outputVariable" part="payload"/>
</copy>
</assign>
<reply name="replyOutput" partnerLink="client" portType="client:ProvaBPEL"
operation="process" variable="outputVariable"/>
</sequence>
</process>
which gets as input a WSLA type (http://www.research.ibm.com/wsla) and returns it as output without performing any operation (just a copy operation).
I have deployed the process and it can be accessed at http://localhost/8888/orabpel/default/ProvaBPEL/1.0. I can see it in the BPEL Console but (first problem) I can't test it because I can't see the usual HTML form the BPEL console shows. I can't see the origine xml form too. If I go to the BPEL endpoint I see the following error message:
Cannot test this Operation using the Test Page because Could not understand type: {http://www.research.ibm.com/wsla}StringList
The wsdl of the deployed BPEL Process is:
<?xml version="1.0" encoding="UTF-8"?>
<definitions name="ProvaBPEL"
targetNamespace="http://xmlns.oracle.com/ProvaBPEL"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:client="http://xmlns.oracle.com/ProvaBPEL"
xmlns:ns1="http://www.research.ibm.com/wsla"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/">
     <types>
          <schema xmlns="http://www.w3.org/2001/XMLSchema">
               <import namespace="http://www.research.ibm.com/wsla" schemaLocation="WSLA093.xsd" />
          </schema>
     </types>
     <message name="ProvaBPELRequestMessage">
          <part name="payload" element="ns1:SLA" />
     </message>
     <message name="ProvaBPELResponseMessage">
          <part name="payload" element="ns1:SLA" />
     </message>
     
     <portType name="ProvaBPEL">
          <operation name="process">
               <input message="client:ProvaBPELRequestMessage" />
               <output message="client:ProvaBPELResponseMessage"/>
          </operation>
     </portType>
     <plnk:partnerLinkType name="ProvaBPEL">
          <plnk:role name="ProvaBPELProvider">
               <plnk:portType name="client:ProvaBPEL"/>
          </plnk:role>
     </plnk:partnerLinkType>
</definitions>
I used Apache XMLBeans to bind the WSLA types to Java types creating a WSLA.jar that I import in the following client I have developed:
import com.ibm.research.wsla.*;
import java.io.File;
import java.net.URL;
import javax.xml.soap.*;
import org.w3c.dom.Document;
import org.w3c.dom.Node;
public class SOAPClient {
public static void main(String[] args) {
SOAPConnectionFactory fact;
try {
fact = SOAPConnectionFactory.newInstance();
SOAPConnection con = fact.createConnection();
MessageFactory mfact = MessageFactory.newInstance();
SOAPMessage smsg = mfact.createMessage();
SOAPPart prt = smsg.getSOAPPart();
SOAPEnvelope env = prt.getEnvelope();
SOAPBody bdy = env.getBody();
File xmlfile = new File("C:\\prova.xml");
SLADocument sladoc = SLADocument.Factory.parse(xmlfile);
Node nd = sladoc.getDomNode();
bdy.addDocument((Document) nd);
System.out.println("SOAP Message:");
smsg.writeTo(System.out);
System.out.println();
System.out.println();
//Set the WebService end point URL
URL endpoint = new URL("http://dana:8888/orabpel/default/ProvaBPEL/1.0");
//Send the message
SOAPMessage response;
response = con.call(smsg, endpoint);
System.out.println("Received SOAP Message:");
response.writeTo(System.out);
System.out.println();
//Close the connection
con.close();
catch (Exception e) {
e.printStackTrace();
The client simply parses an XML file and uses it as bosy of the SOAP message.
JDeveloper compiles it without errors but when I run the project (second problem) I get the following as SOAP response:
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"><env:Header/><env:Body><env:Fault xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"><faultcode>env:Server</faultcode><faultstring>java.lang.NullPointerException</faultstring><faultactor></faultactor></env:Fault></env:Body></env:Envelope>
and I can't see any instance of the BPEL Process in the BPEL Console. I'm quite sure the SOAP message is well formed because I can see it in the Running output. I also tried with simpler BPEL process for which I can see the HTML form in the BPEL Console and copying and pasting the SOAP message generated with my client in the Origine XML form the Process was invoked correctly.
Can anybody help me? Thanks in advance.

Great! Thank you for the reply! Now I manage to invocate the BPEL process. I put the line:
smsg.getMimeHeaders().addHeader("SOAPAction", "process");
and now my day is a good day!
However I tried to place the import of the WSLA093.xsd schema outside the types element with:
<import namespace="http://www.research.ibm.com/wsla" location="WSLA093.xsd" />
but it didn't work. Now the wsdl file of the BPEL Process is:
<?xml version="1.0" encoding="UTF-8"?>
<definitions name="ProvaBPEL"
targetNamespace="http://xmlns.oracle.com/ProvaBPEL"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:client="http://xmlns.oracle.com/ProvaBPEL"
xmlns:ns1="http://www.research.ibm.com/wsla"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/">
<import namespace="http://www.research.ibm.com/wsla" location="WSLA093.xsd" />
<types>
          <schema xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://www.research.ibm.com/wsla" schemaLocation="WSLA093.xsd" />
          </schema>
     </types>
     <message name="ProvaBPELRequestMessage">
          <part name="payload" element="ns1:SLA" />
     </message>
     <message name="ProvaBPELResponseMessage">
          <part name="payload" element="ns1:SLA" />
     </message>
     
     <portType name="ProvaBPEL">
          <operation name="process">
               <input message="client:ProvaBPELRequestMessage" />
               <output message="client:ProvaBPELResponseMessage"/>
          </operation>
     </portType>
     <plnk:partnerLinkType name="ProvaBPEL">
          <plnk:role name="ProvaBPELProvider">
               <plnk:portType name="client:ProvaBPEL"/>
          </plnk:role>
     </plnk:partnerLinkType>
</definitions>
Please tell me if it is correct. I also tried to delete the line:
<import namespace="http://www.research.ibm.com/wsla" schemaLocation="WSLA093.xsd" />
from the types element (even if I don't know if it is correct) but I always have the same error in the BPEL endpoint page:
Cannot test this Operation using the Test Page because Could not understand type: {http://www.research.ibm.com/wsla}StringList
Thank you very muche for the help.

Problems to run BPEL process with console

Similar Messages

Maybe you are looking for