Problems tracing the requests in console using struts and tomcat

Hello everybody,
i m new to struts, actually i want to know about how to track the processing done by controller of struts when a request is send to the controller.
I m using eclipse as my IDE.
Guys have u got what i mean to say,,
i want to track the things in the console.
I have heard abt log4j, but really dont know how to use.
if anybody can give some useful info then it will be grt for me..
Thanks in advance.

Wht settings have u done in DTP?
under upadte tab??

Similar Messages

  • [svn:fx-trunk] 7467: Removing font face validation so that the requested style is used whether or not it matches what the font describes .

    Revision: 7467
    Author:   [email protected]
    Date:     2009-06-01 08:10:15 -0700 (Mon, 01 Jun 2009)
    Log Message:
    Removing font face validation so that the requested style is used whether or not it matches what the font describes. This allows font families to be constructed from multiple fonts including those that do not describe their style in the OS/2 table. Note SWF and the Flash Player restriction of only support 4 faces per font family (plain, bold, italic, and bold & italic) still applies.
    QE: Yes, please look out for negative test cases for embedded font styles that no longer fail. Also look out for minor font outline differences given that we use AFEFontManager by default for DefineFont3 embedded fonts. If you require the legacy font outlines you can configure the test case to use the BatikFontManager (which has been retained for MPL distributions).
    Doc: Yes, we'll release note the relaxed font embedding rules for font faces. I'll annotate the bugs below.
    Reviewer: Paul
    Bugs:
    SDK-14309 - fontWeight should not be restricted
    SDK-14308 - fontWeight: bold is required when specifying certain fonts in the CSS file
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-14309
        http://bugs.adobe.com/jira/browse/SDK-14308
    Modified Paths:
        flex/sdk/trunk/frameworks/flex-config.xml
        flex/sdk/trunk/lib/flex-fontkit.jar
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/common/MxmlConfiguration.java
        flex/sdk/trunk/modules/swfutils/src/java/flash/fonts/BatikFontManager.java
        flex/sdk/trunk/modules/swfutils/src/java/flash/fonts/CachedFontManager.java
        flex/sdk/trunk/modules/swfutils/src/java/flash/fonts/FontManager.java
        flex/sdk/trunk/modules/swfutils/src/java/flash/fonts/JREFontManager.java

    i have sorted this out by placing it in the webapps dir of my tomcat. The problem is when i map a servlet in my own web.xml, it stops working. At this time i just want to map 1 servlet called main, and it is in C:\Tomcat 5.5\webapps\cmt3082\WEB-INF\classes\myProject
    cmt3082 is my project folder
    WEB-INF holds my web.xml
    classes holds my servlet, in this case main.java
    myProject holds my Java classes
    So i have mapped main like this for now
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <web-app xmlns="http://java.sun.com/xml/ns/j2ee"
        xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
        xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd"
        version="2.4">
    <servlet> 
    <servlet-name>main</servlet-name> 
    <servlet-class>classes.main</servlet-class>
    </servlet>
    </web-app>But with this in place, it gives me the error cannot find requested resource. And i missing somthing in the web.xml?
    cheers

  • Problem regarding the creation of Table using CSS.

    Hi ,
    Here I have a Problem regarding the creation of Table using CSS.
    In My Application i have a table with multiple rows(Rows are Dynamically added to the table).First i am setting the table with the following properties:
    width:900px;
    height : auto,
    Overflow : visible,
    Max-height: : 200px.
    If I use above properties,I'm getting a table with 5 or 6 rows(height upto 200px).After that i am getting the Vertical ScrollBar.
    The problem is when a table has many columns, Vertical and Horizontal Scrolls are coming at the time of setting the table. The table height is not Increasing dynamically.
    How can i use "height" property in CSS? (I want the table height to be increased when the columns are more.)
    Thanks & Regards
    Madhavi

    Hey humble user. Errr I'm trying to understand what ur trying to do. U want to create a section of a region destructively from an existing region right? If so select the option convert to new region (opt-comm-R or selecting it by right clicking). Check your audio bin to make sure. Whats the "merge" function? Are u refering to the glue tool?

  • I have problem running the inverted pendulum trainer using NI ELVIS.

    i have a problem running the inverted pendulum trainer using NI ELVIS. While loading the NI ELVIS bypass VI it is unable to find the "enable communications bypass.vi". could anybody please attach the VI.
    I am using NI ELVIS 2
    Thanks

    The Enable Communications Bypass VI sounds like a VI that is only included with Traditional or legacy ELVIS designed to work with the first generation ELVIS unit, not the ELVIS II/II+ or myDAQ. It sounds like the inverted pendulum trainer you have is for use with ELVIS I. In the LabVIEW Loading dialog, do you see the full path for where it's looking for the VI? Can you provide that full path? If the inverted pendulum trainer is designed to work with the older ELVIS unit, there may be a newer version that supports ELVIS II.
    Donovan

  • I have the new iPad. Even with airplane mode on, my battery life is extremely limited. Is there a problem with the battery? I used to have the ipad2 and had no such problem.

    I have the new iPad. Even with airplane mode on, my battery life is extremely limited. Is there a problem with the battery? I used to have the ipad2 and had no such problem.

    What is your brightness setting & how many apps are open?
    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • File Upload using struts and jsp

    Hi,
    Anybody have sample coding for uploading files into the database using struts and jsp.
    Thanking you in advance for providing the sample coding.
    Veena

    Hi Veena,
    In Strutsconfig.xml you have to configure data sources like this
    **************strutsconfig.xml******
    <data-sources>
    <data-source
    type="org.apache.common.dbcp.BasicDataSource">
    <set-property property="driverClassName"
    vlaue="oracle.jdbc.driver.OracleDriver"/>
    <set-property property="url" vlaue="jdbcracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521))(CONNECT_DATA=(SID =ORCL)))"/>
    <!-- <set-property property="url"
    vlaue="jdbcracle:thin:@127.0.0.1:1521:ORCL"/>-->
    <set-property property="username"
    vlaue="scott"/>
    <set-property property="password"
    vlaue="tiger"/>
    </data-source>
    </data-sources>
    Now here is how to get data source
    public class LookupAction extends Action
    public Double getQuote(String symbol,
    HttpServletRequest request)
    throws Exception
    Double price=null;
    Connection conn=null;
    Statement stmt=null;
    ResultSet rs=null;
    DataSource dataSource=null;
    try
    dataSource = getDataSource(request);
    conn= dataSource.getConnection();
    stmt= conn.createStatement();
    rs= stmt.executeQuery("select * from stocks where" + "symbol='" + symbol +"'");
    if (rs.next())
    =======================
    After you can use the coding what I posted earlier.
    For that you need to create a table with attachment as a CLOB col.
    then with prepared statement I am setting value .
    Plz try your self every thing ok you can get that.
    all the best
    bye
    sudheen

  • I prepare chronologies in word, and i am trying to do the same in pages using tables and cells. But somtimes i need a cell to wrap onto the next page but I can't work out how to do it - any suggestions would be greatly appreciated

    I prepare chronologies in word, and I am trying to do the same in pages using tables and cells. But sometimes I need a cell to wrap onto the next page because the contents are bigger than the page or the space left on the page,  but I can't work out how to do it - any suggestions would be greatly appreciated

    brendanfromsydney wrote:
    What are the different opinions on why pages should not achieve this?
    As far as I know, Apple is free to choose to offer this or that feature.
    They never said that they want to clone Word or even compete with it.
    Differences between tables in both worlds are numerous.
    In Pages (or Numbers)
    - we can't sort a single column
    - we can't sort by row
    - we can't insert or remove a single cell
    - a cell can't cross pages boundaries
    If I understand well these design choices match :
    ++-+-+-+-+-+-+-+-++
    Apple Human Interface Guidelines:
    Apply the 80 Percent Solution
    During the design process, if you discover problems with your product design, you might consider applying the 80 percent solution‚ that is, designing your software to meet the needs of at least 80 percent of your users. This type of design typically favors simpler, more elegant approaches to problems.
    If you try to design for the 20 percent of your target audience who are power users, your design may not be usable by the other 80 percent of users. Even though that smaller group of power users is likely to have good ideas for features, the majority of your user base may not think in the same way. Involving a broad range of users in your design process can help you find the 80 percent solution.
    +-+-+-+-+-+-+-+-+-++
    Yvan KOENIG (VALLAURIS, France) jeudi 9 juin 2011 16:03:52
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
    Please : Search for questions similar to your own before submitting them to the community
    To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

  • SCOM - -500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed

    Hi There,
    Need your assistance on the issue that we are facing in prod environment.
    We are able to open web console from remote machine and able to view monitoring pane as well as my workplace folders from console . Able to view and access alerts and other folder in the monitoring pane. We are able to view and access My Workplace folder
    and able to view the reports in Favorite Reports folder. But when I click on run Report we  are getting the below error  "500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed."
    In our environment we have 3 servers one is SQL server and two are SCOM servers. Please advise how to fix this issue. Do we have to do any thing from SQL End?
    Errors: Event ID 21029: Performance data from the OpsMgr connector could not be collected since opening the shared data failed with error "5L".
     Event ID 6002 : Performance data from the Health Service could not be collected since opening the shared data failed with error 5L (Access is denied.).
    Regards,
    Sanjeev Kumar

    Duplicate thread：
    http://social.technet.microsoft.com/Forums/en-US/7675113e-49f0-4b3a-932b-4aceb3cfa981/scom-500-internal-server-error-there-is-a-problem-with-the-resource-you-are-looking-for-and-it?forum=operationsmanagerreporting
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Urgently!! Deploy project using Struts and Toplink

    Hello. I want to make a deploy of a project in wich I'm using Struts and Toplink technologies.
    I'm using JDeveloper 10g for Windows and my production server is a SUN V880 with Soloaris 8 and I make it ok, but when I run it since a PC in the intranet the following errors appears (obviously those don't appear before):
    java.lang.NullPointerException     at org.apache.struts.taglib.html.JavascriptValidatorTag.doStartTag(JavascriptValidatorTag.java:309)     at jsp.login._jspService(_login.java:50)     [SRC:/jsp/login.jsp:5]     at com.orionserver[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)     at oracle.jsp.runtimev2.JspPageTable.compileAndServe(JspPageTable.java:567)     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:302)     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:765)     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:208)     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:125)     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)     at java.lang.Thread.run(Thread.java:536)
    Thank you so much for help.

    NOO!! :( I don't install any libraries in the server, but in the WAR file of the application, in the lib folder, there was the jars corresponding. I thought that those libraries, in the WAR file, was "local" to the project, anyway, the Struts and Toplink libraries must be global at server level, 'cause I will use it sure once agian, and now I'm trying to install those in the server...
    Thank you so much!!

  • 502 - Web server received an invalid response while acting as a gateway or proxy server. There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream cont

    I am getting error while accessing url of lyncweb.domain.com, dialin.domain.com and meet.domain.com pointing to RP server.
    502 - Web server received an invalid response while acting as a gateway or proxy server.
    There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.
    Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

    When i try with https://lyncfrontend.domain.local:4443 and https://lyncfrontend.domain.com:4443 both opens but when i open the external domain name i get certificate .
    ARR version installed is 3.0
    To throw more light on the configuration:
    Lync 2013 implemented, internal domain name is : domain.local and external domain name is : domain.com
    All servers in VMs are with 4 core processor, 24gb ram, 1TB drive.
    Frontend : Windows 2012r2 with Lync 2012 Standard Edition - 1 No (192.168.10.100)
    Edge : Windows 2012 with Lync 2012 Std - 1 No 
    (192.168.11.101 DMZ) in workgroup
    ISS ARR Reverse Proxy 3.0 : Windows 2012 with ARR and IIS configured. (192.168.11.102)
    Certificate : Internal Domain root CA for internal and External (Digicert).
    Internal Network : 192.168.10.x /24
    External Network (DMZ) : 192.168.11.x /24
    Public Firewall NAT to DMZ ip for firewall and RP server. So having two public IP facing external network.
    Edge has : sip.domain.com, webconf.domain.com, av.domain.com
    IIS ARR RP server has : lyncdiscover.domain.com, lyncweb.domain.com, meet.domain.com, dialin.domain.com
    Have created SRV record in public : _sip.tls.domain.com >5061>sip.domain.com, _sipfederationtls._tcp.domain.com>5061>sip.domain.com, _xmpp-server._tcp.domain.com>5269>sip.domain.com
    Installed frontend server using MS Lync server 2013 step by step for anyone by Matt Landis, Lync MVP.
    Internal AD Integrated DNS pointing Front-end
    Type of Record FQDN
    IP Description 
    A sip.domain.com
    192.168.10.100 Address internal Front End  or Director for internal network clients 
    A admin.domain.com
    192.168.10.100 URL Administration pool
    A DialIn.domain.com
    192.168.10.100 URL Access to Dial In 
    A meet.domain.com
    192.168.10.100 URL of Web services meeting
    A lyncdiscoverinternal.domain.com
    192.168.10.100 Register for Lync AutoDiscover service to internal users
    A lyncdiscover.domain.com
    192.168.10.100 Register for Lync AutoDiscover service to external users  
    SRV Service: _sipinternaltls Protocol: _tcp Port: 5061
    sip.domain.com Record pointer services to internal customer connections using TLS 
    External DNS pointing Edge & Proxy
    Type of Record FQDN
    IP Endpoint
    A sip.domain.com
    x.x.x.100 Edge
    A webconf.domain.com
    x.x.x.100 Edge
    A av.domain.com
    x.x.x.100 Edge
    SRV _sip._tls.domain.com
    sip.domain.com: 443 Edge
    SRV _sipfederationtls._tcp.domain.com
    sip.domain.com:5061 Edge
    A Meet.domain.com
    x.x.x.110 Reverse Proxy
    A Dialin.domain.com
    x.x.x.110 Reverse Proxy
    A lyncdiscover.domain.com
    x.x.x.110 Reverse Proxy
    A lyncweb.domain.com
    x.x.x.110 Reverse Proxy
    In IIS ARR proxy server following server farms are added and configured as per link ttp://y0av.me/2013/07/22/lync2013_iisarr/
    In proxy server had setup only following server farm : While running remote connectivity web service test : meet, dialin, lyncdiscover and lyncweb.
    The client inside works fine internally and through vpn. Login with external client also working fine. But we are getting error in MRCA as follows.
    a) While testing remote connectivity for lync getting error : The certificate couldn't be validated because SSL negotiation wasn't successful. This could have occurred as a result of a network error or because of a problem with the certificate installation.
    Certificate was installed properly.
    b) For remote web test under Lync throws error : A Web exception occurred because an HTTP 502 - BadGateway response was received from IIS7.
    HTTP Response Headers:
    Content-Length: 1477
    Content-Type: text/html
    Date: Wed, 14 May 2014 10:03:40 GMT
    Server: Microsoft-IIS/8.0
    Elapsed Time: 1300 ms.
    Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

  • Running Mavericks, when I try to print on my  HP LaserJet 1320tn I get the message  "Printing - The printer is in use." and nothing happens. Worked fine with Mountain Lion.

    I'm running Mavericks and when I try to print on my networked HP LaserJet 1320tn I get the message  "Printing - The printer is in use." and nothing happens. The same set up works fine's with Mountain Lion. I am uptodate. Any thoughts?

    Hi,
    Thanks, but these suggestions aren't helping.
    I have
    1. tried to print form a different add
    2. deleted and reinstaled the printer
    3. deleted and reinstall the printer drivers
    4. reset the printing system
    there's no problem with the printer or the wireless as (1) i can print using my partner's mac with mountian lion and (2) I can see the printer on my own mac (mavericks)
    Any more suggestions?
    Thanks
    Laurie

  • Hi,  If I have 1 license for creative cloud, will it possible to install in 2 computers (1 laptop and 1 desktop)?  When I am in the office I can use desktop and at home I can use laptop? At the same time I will be using only one devise. Will that be possi

    Hi,  If I have 1 license for creative cloud, will it possible to install in 2 computers (1 laptop and 1 desktop)?  When I am in the office I can use desktop and at home I can use laptop? At the same time I will be using only one devise. Will that be possible?  Thanks

    Yes. Yes. Yes.
    Mylenium

  • Do the Mac minis support using AirPlay and all of its functions?   I thought I saw a comment yesterday that suggested the Mac mini (particularly the late 2012 models) does not support AirPlay.  Thank you.

    Do the Mac minis support using AirPlay and all of its functions?   I thought I saw a comment yesterday that suggested the Mac mini (particularly the late 2012 models) does not support AirPlay.  Thank you.

    Hello,
    AirPlay Mirroring
    Requires a second-generation Apple TV or later. Supports the following Mac models:
    iMac (Mid 2011 or newer)
    Mac mini (Mid 2011 or newer)
    MacBook Air (Mid 2011 or newer)
    MacBook Pro (Early 2011 or newer)
    http://support.apple.com/kb/HT5444

  • [svn:osmf:] 13042: Fix for FM-287, reinstating the main sample ( that uses serial and parallel composition), and making another pass at  getting all the changed trait methods mapped correctly back- and forth between JS and Flash .

    Revision: 13042
    Revision: 13042
    Author:   [email protected]
    Date:     2009-12-17 03:45:27 -0800 (Thu, 17 Dec 2009)
    Log Message:
    Fix for FM-287, reinstating the main sample (that uses serial and parallel composition), and making another pass at  getting all the changed trait methods mapped correctly back- and forth between JS and Flash.
    Ticket Links:
        http://bugs.adobe.com/jira/browse/FM-287
    Modified Paths:
        osmf/trunk/apps/samples/framework/HTMLGatewaySample/HTMLGatewaySample.as
        osmf/trunk/apps/samples/framework/HTMLGatewaySample/html-template/index.template.html
        osmf/trunk/framework/MediaFramework/org/osmf/external/HTMLElement.as
        osmf/trunk/framework/MediaFramework/org/osmf/gateways/HTMLGateway.as

    Perre wrote:I'm used to being able to pick one or a couple of songs and then adding it a specified playlist. Is this impossible in sonata?
    It's clearly not impossible, just different than you expect. Create your playlist as you want it to appear in the Current tab (meaning don't dump every single song from your library in there, just the ones you want) and then save the playlist.
    Perre wrote:And if I try to play the m3u file created (the one with every song listed) through freevo I get a message that the directory is empty. What am I doing wrong??
    Look at save_absolute_paths_in_playlists in your mpd.conf.

  • Hi! I have had the Creative Cloud in use before and now I want to start using the programs again. How do I do that?

    Hi! I have had the Creative Cloud in use before and now I want to start using the programs again. How do I do that?

    restart a subscription, https://creative.adobe.com/plans

Maybe you are looking for