Problems upgrading iphone on PC
Every time I try to upgrade my iphone 4 software on my PC I get a message "network connection timed out. Check your network settings" Can't figure out what it could be. Any suggestions?
A simple search of the forums would have revealed this is a common issue and provided a solution.
Temporarily disable any Anti-Virus and Firewall software on the comptuer then try the upgrade again.
Similar Messages
-
Problems upgrading iphone software
Every time I try to upgrade to the latest version I get the following error message.
"There was a problem downloading the software for the iphone ..........The network connection timed out"
Any ideas?The usual cause of this is anti-virus software and/or firewalls running on your computer. Disable all of that stuff & try again.
-
Problems upgrading iPhone 4 to latest iOS (7.1.2)
Hi, I'm trying to upgrade an iPhone 4 from iOS 6.0.1 to the latest version (7.1.2) but facing the dreaded 3194 error in iTunes. I have tried everything from resetting my hosts file to disabling my firewall and anti-virus but the error just will not go away.. it occurs right at the end of the restore process after the software has been restored and is being verified. I looked through the update log and it seems to be an issue with updating the baseband. Copying a section of the log below.
This phone has never been jailbroken or modified in any way. Please help!!!
[20:50:15.0138] update_baseband: requesting baseband firmware data
[20:50:15.0138] [nand_part_core:INF@3169] next 87 pages of boot blocks written with LLB image of size 133632 bytes
[20:50:15.0138] [nand_part_core:INF@3172] final 39 pages of boot blocks left unprogrammed
[20:50:15.0138] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x95213420
[20:50:15.0138] recv(13, 4) failed: connection closed
[20:50:15.0138] unable to read message size: -1
[20:50:15.0138] 0: RamrodErrorDomain/3: update_baseband: host failed to provide baseband data
[20:50:15.0138] unable to convert ramrod error 3
[20:50:15.0138] restore failed with CFError:
[20:50:15.0138] 0: AMRestoreErrorDomain/ffffffff: failed to update device firmware
[20:50:15.0138] 1: AMRestoreErrorDomain/ffffffff: ramrod firmware update failed
[20:50:15.0138] 2: RamrodErrorDomain/3: update_baseband: host failed to provide baseband data
[20:50:15.0138] send(13, 31560) failed: Broken pipe
[20:50:15.0138] error sending final status message: -1
[20:50:15.0138] waiting for host to acknowledge final status received...
[20:50:15.0138] recv(13, 4) failed: Connection reset by peer
[20:50:15.0138] unable to read message size: -1
[20:50:15.0138] received NULL message from host, expected final status
Full log as follows:
2014-07-12 01:48:30.497 [4552:135c]: restore library built Feb 12 2014 at 16:27:17
2014-07-12 01:48:30.497 [4552:135c]: iTunes: iTunes 11.2.2.3
2014-07-12 01:48:30.497 [4552:135c]: iTunes: Software payload version: 11D257 (option key)
2014-07-12 01:48:30.497 [4552:135c]: iTunes: Using MobileRestore state machine
[20:49:26.0904] Changing state from 'Idle' to 'Restoring'
[20:49:26.0904] requested restore behavior: Erase
[20:49:26.0914] requested variant: Erase
[20:49:26.0914] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[20:49:27.0729] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is True
[20:49:27.0729] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreLogo" Digest = "<CFData 0724AF80 [731B907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[20:49:27.0739] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreDeviceTree" Digest = "<CFData 0724B0A0 [731B907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[20:49:27.0739] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreKernelCache" Digest = "<CFData 0724B208 [731B907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[20:49:27.0739] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreRamDisk" Digest = "<CFData 0724B1C0 [731B907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[20:49:27.0739] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBEC" Digest = "<CFData 0724A050 [731B907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[20:49:27.0739] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBSS" Digest = "<CFData 0724AEF0 [731B907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[20:49:27.0739] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "KernelCache" Digest = "<CFData 0724AE18 [731B907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[20:49:27.0739] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow1" Digest = "<CFData 07249FC0 [731B907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[20:49:27.0739] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow0" Digest = "<CFData 0724AB48 [731B907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[20:49:27.0739] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "LLB" Digest = "<CFData 0724ACF8 [731B907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[20:49:27.0749] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBoot" Digest = "<CFData 0724B3B8 [731B907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[20:49:27.0749] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "DeviceTree" Digest = "<CFData 0724ADD0 [731B907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[20:49:27.0749] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging1" Digest = "<CFData 0724ACB0 [731B907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[20:49:27.0749] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "AppleLogo" Digest = "<CFData 0724AD40 [731B907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[20:49:27.0749] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryPlugin" Digest = "<CFData 0724AAB8 [731B907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[20:49:27.0749] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryFull" Digest = "<CFData 0724A7E8 [731B907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[20:49:27.0749] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging0" Digest = "<CFData 0724A680 [731B907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[20:49:27.0749] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RecoveryMode" Digest = "<CFData 0724A368 [731B907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[20:49:27.0749] amai: _AMAuthInstallBundleCreateServerRequestDictionary: using UniqueBuildID <CFData 07102F28 [731B907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
[20:49:27.0749] amai: AMAuthInstallRequestSendSync: SSO function returned NULL, SSO disabled.
[20:49:27.0759] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/Atto/AppData/Local/Temp/Per21A8.tmp/amai/debug/tss-re quest.plist
[20:49:28.0539] amai: tss_submit_job: HttpQueryInfo returned 200
[20:49:28.0779] amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.1.0)
[20:49:28.0779] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/Atto/AppData/Local/Temp/Per21A8.tmp/amai/debug/tss-re sponse.plist
[20:49:28.0899] amai: _AMAuthInstallBundlePopulatePersonalizedBundle: no entry in manifest found for "Diags"
[20:49:28.0929] iBoot build-version = iBoot-1940.10.58
[20:49:28.0929] iBoot build-style = RELEASE
[20:49:28.0929] requested restore behavior: Erase
[20:49:28.0929] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[20:49:28.0929] requested restore behavior: Erase
[20:49:28.0939] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[20:49:28.0939] unable to open device_map.txt: No such file or directory
[20:49:28.0939] found device map entry for 0x00008930 0x00000000. boardConfig=n90ap platform=s5l8930x
[20:49:28.0939] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[20:49:28.0939] AMDeviceIoControl: GetOverlappedResult failed
[20:49:28.0939] AMDeviceIoControl: pipe stall
[20:49:28.0939] USBControlTransfer: error 31, usbd status c0000004
[20:49:28.0939] command device request for 'getenv radio-error' failed: 2008
[20:49:28.0939] radio-error not set
[20:49:28.0939] unable to open device_map.txt: No such file or directory
[20:49:28.0949] <Recovery Mode Device 06F709F0>: production fused device
[20:49:28.0949] requested restore behavior: Erase
[20:49:28.0949] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[20:49:28.0949] requested restore behavior: Erase
[20:49:28.0949] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[20:49:28.0949] interface has 1 endpoints, file pipe = 1
[20:49:28.0949]
[20:49:28.0949] <Recovery Mode Device 06F709F0>: operation 4 progress -1
[20:49:29.0009] bootstrapping restore with iBEC
[20:49:29.0009] requested restore behavior: Erase
[20:49:29.0019] <Recovery Mode Device 06F709F0>: operation 31 progress -1
[20:49:30.0019] <Recovery Mode Device 06F709F0>: Recovery mode succeeded
[20:49:30.0019] Finished Recovery Restore Phase: Successful
[20:49:30.0529] Recovery mode device disconnected
[20:49:30.0539] Device removed when in state Restoring, moving device to transition state
[20:49:30.0539] Changing state from 'Restoring' to 'Transitioning'
[20:49:30.0539] Creating timer to monitor transition
[20:49:34.0228] Recovery mode device connected
[20:49:34.0228] Transitioning device returned, continuing restore.
[20:49:34.0228] Canceling timer
[20:49:34.0228] Changing state from 'Transitioning' to 'Restoring'
[20:49:34.0228] requested restore behavior: Erase
[20:49:34.0228] requested variant: Erase
[20:49:34.0238] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[20:49:35.0060] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
[20:49:35.0060] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
[20:49:35.0060] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
[20:49:35.0060] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreKernelCache"
[20:49:35.0060] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreRamDisk"
[20:49:35.0060] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBEC" has been previously personalized; skipping it
[20:49:35.0060] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
[20:49:35.0060] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "KernelCache"
[20:49:35.0070] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
[20:49:35.0070] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
[20:49:35.0070] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
[20:49:35.0070] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
[20:49:35.0070] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
[20:49:35.0070] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
[20:49:35.0070] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
[20:49:35.0070] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
[20:49:35.0070] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
[20:49:35.0070] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
[20:49:35.0070] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
[20:49:35.0070] amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
[20:49:35.0070] iBoot build-version = iBoot-1940.10.58
[20:49:35.0080] iBoot build-style = RELEASE
[20:49:35.0080] requested restore behavior: Erase
[20:49:35.0080] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[20:49:35.0080] requested restore behavior: Erase
[20:49:35.0080] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[20:49:35.0080] unable to open device_map.txt: No such file or directory
[20:49:35.0080] found device map entry for 0x00008930 0x00000000. boardConfig=n90ap platform=s5l8930x
[20:49:35.0080] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[20:49:35.0080] AMDeviceIoControl: GetOverlappedResult failed
[20:49:35.0080] AMDeviceIoControl: pipe stall
[20:49:35.0080] USBControlTransfer: error 31, usbd status c0000004
[20:49:35.0080] command device request for 'getenv radio-error' failed: 2008
[20:49:35.0080] radio-error not set
[20:49:35.0080] unable to open device_map.txt: No such file or directory
[20:49:35.0090] <Recovery Mode Device 06FA4F28>: production fused device
[20:49:35.0090] requested restore behavior: Erase
[20:49:35.0090] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[20:49:35.0090] requested restore behavior: Erase
[20:49:35.0090] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[20:49:35.0090] interface has 1 endpoints, file pipe = 1
[20:49:35.0090]
[20:49:35.0090] <Recovery Mode Device 06FA4F28>: operation 4 progress -1
[20:49:35.0140] unable to open device_map.txt: No such file or directory
[20:49:35.0150] found device map entry for 0x00008930 0x00000000. boardConfig=n90ap platform=s5l8930x
[20:49:35.0150] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[20:49:35.0150] requested restore behavior: Erase
[20:49:35.0150] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[20:49:35.0150] requested restore behavior: Erase
[20:49:35.0150] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[20:49:35.0150] <Recovery Mode Device 06FA4F28>: operation 42 progress -1
[20:49:35.0160] requested restore behavior: Erase
[20:49:35.0160] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[20:49:36.0190] <Recovery Mode Device 06FA4F28>: operation 5 progress -1
[20:49:36.0490] unable to open device_map.txt: No such file or directory
[20:49:36.0500] found device map entry for 0x00008930 0x00000000. boardConfig=n90ap platform=s5l8930x
[20:49:36.0500] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[20:49:36.0500] AMDeviceIoControl: GetOverlappedResult failed
[20:49:36.0500] AMDeviceIoControl: pipe stall
[20:49:36.0500] USBControlTransfer: error 31, usbd status c0000004
[20:49:36.0500] command device request for 'getenv ramdisk-delay' failed: 2008
[20:49:38.0420] <Recovery Mode Device 06FA4F28>: operation 6 progress -1
[20:49:39.0430] <Recovery Mode Device 06FA4F28>: operation 7 progress -1
[20:49:39.0700] <Recovery Mode Device 06FA4F28>: operation 8 progress -1
[20:49:39.0700] unable to open device_map.txt: No such file or directory
[20:49:39.0700] found device map entry for 0x00008930 0x00000000. boardConfig=n90ap platform=s5l8930x
[20:49:39.0700] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[20:49:39.0700] <Recovery Mode Device 06FA4F28>: operation 9 progress -1
[20:49:39.0700] <Recovery Mode Device 06FA4F28>: Recovery mode succeeded
[20:49:39.0700] Finished Recovery Restore Phase: Successful
[20:49:42.0030] Recovery mode device disconnected
[20:49:42.0030] Device removed when in state Restoring, moving device to transition state
[20:49:42.0030] Changing state from 'Restoring' to 'Transitioning'
[20:49:42.0030] Creating timer to monitor transition
[20:49:46.0813] RestoreOS mode device connected
[20:49:46.0813] Transitioning device returned, continuing restore.
[20:49:46.0813] Canceling timer
[20:49:46.0813] Changing state from 'Transitioning' to 'Restoring'
[20:49:46.0823] <Restore Device 0735FD18>: operation 44 progress -1
[20:49:46.0823] requested restore behavior: Erase
[20:49:46.0823] requested variant: Erase
[20:49:46.0823] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[20:49:47.0673] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
[20:49:47.0673] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
[20:49:47.0673] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
[20:49:47.0673] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreKernelCache"
[20:49:47.0673] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreRamDisk"
[20:49:47.0673] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBEC" has been previously personalized; skipping it
[20:49:47.0673] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
[20:49:47.0673] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "KernelCache"
[20:49:47.0673] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
[20:49:47.0673] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
[20:49:47.0683] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
[20:49:47.0683] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
[20:49:47.0683] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
[20:49:47.0683] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
[20:49:47.0683] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
[20:49:47.0683] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
[20:49:47.0683] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
[20:49:47.0683] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
[20:49:47.0683] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
[20:49:47.0683] amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
[20:49:47.0683] requested restore behavior: Erase
[20:49:47.0683] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[20:49:47.0693] device did not return saved USB log
[20:49:47.0693] device did not return saved panic log
[20:49:47.0693] previous restore failed with exit status 0x100
[20:49:47.0693] connected to service com.apple.mobile.restored
[20:49:47.0693] using protocol version 13
[20:49:47.0703] unable to open device_map.txt: No such file or directory
[20:49:47.0703] board config = n90ap
[20:49:47.0703] no value returned for BootArgs
[20:49:47.0703] _copyDeviceProperty() failed for restore bootargs
[20:49:47.0713] no value returned for MarketingPartNumber
[20:49:47.0713] _copyDeviceProperty() failed for mpn
[20:49:47.0713] requested restore behavior: Erase
[20:49:47.0713] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[20:49:47.0723] value query for 'HardwareModel' returned 'N90AP'
[20:49:47.0743] <Restore Device 0735FD18>: operation 28 progress -1
[20:50:15.0138] previous restore failed: 0x0
[20:50:15.0138] Scaler 0 enableDeviceClock(false,FULL_CLOCK_INDEX) = 0x0
[20:50:15.0138] void AppleRGBOUT::verify_swap_gated(IOMFBSwapIORequest *, bool *) failed fIsDPOut: 0 fDPDriver: 0 fTVOUTDelegate: 0
[20:50:15.0138] AppleRGBOUT verify_swap failed
[20:50:15.0138] void AppleRGBOUT::verify_swap_gated(IOMFBSwapIORequest *, bool *) failed fIsDPOut: 0 fDPDriver: 0 fTVOUTDelegate: 0
[20:50:15.0138] AppleRGBOUT verify_swap failed
[20:50:15.0138] AppleS5L8920XBasebandSPIController::loadConfiguration: NCLK Frequency 48857142, Prescaler 3
[20:50:15.0138] BasebandSPIDevice::exitLowPower: Invalid state inactive
[20:50:15.0138] AppleSerialMultiplexer: adap::start: Frame size is 2048, Rx Buffer count is 16
[20:50:15.0138] AppleSerialMultiplexer: mux::start: created new mux (17) for spi-baseband with adapter BasebandSPIDevice
[20:50:15.0138] AppleSerialMultiplexer: debugparams::init: Parsed flags "" ( 0 )
[20:50:15.0138] AppleSerialMultiplexer: !! mux::setPowerStateGated: Skipping power state change
[20:50:15.0138] AppleSamsungSerial: Identified Serial Port on ARM Device=uart1 at 0x82600000(0x90d33000)
[20:50:15.0138] AppleSamsungSerial: Identified Serial Port on ARM Device=uart2 at 0x82700000(0x90d35000)
[20:50:15.0138] AppleSamsungSerial: Identified Serial Port on ARM Device=uart3 at 0x82800000(0x90d38000)
[20:50:15.0138] AppleSamsungSerial: Identified Serial Port on ARM Device=uart6 at 0x82b00000(0x90d3a000)
[20:50:15.0138] [HPark] AUD10::start: 0x80249000, highland-park mIISNub: 0x938fe100, sampleRate = 44100, ol=10, oi=12
[20:50:15.0138] AppleCS42L61Audio: could not allocate control 395
[20:50:15.0138] AppleARMBacklight::start: _minDACLevel=456 _maxDACLevel=1971
[20:50:15.0138] AppleMultitouchN1SPI: successfully started
[20:50:15.0138] AppleRGBOUT: TVOUT device is detected
[20:50:15.0138] ApplePinotLCD: _lcdPanelID: 0xb2d105c8 _lcdPanelClass: 2
[20:50:15.0138] IOReturn AppleMobileCLCD::set_ditherTable_state(bool), mIsCLCDDitherFor8Bits is true, no dynamic dither table.
[20:50:15.0138] AppleD1815PMUPowerSource: AppleUSBCableDetect 1
[20:50:15.0138] AppleD1815PMUPowerSource: AppleUSBCableType USBHost
[20:50:15.0138] [HPark] AUD10::start: 0x80249000, highland-park mIICNub: 0x91b5d540, mIISNub: 0x938fe100, mSerialNub: 0x938a7400, sampleRate = 44100, ol=10, oi=12
[20:50:15.0138] [HPark] AUD10 ATSc values: [ mic1: 0x000000ef, mic2: 0x0000000b, mic3: 0x00000000, recv: 0x00000013, spk: 0x00000000 ]
[20:50:15.0138] [HPark] AUD10::setPowerState() function called whereas Start() is not finished
[20:50:15.0138] AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet
[20:50:15.0138] AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet
[20:50:15.0138] AppleMultitouchN1SPI: detected HBPP. driver will be kept alive
[20:50:15.0138] IOSDIOController::enumerateSlot(): Searching for SDIO device in slot: 0
[20:50:15.0138] IOSDIOController::enumerateSlot(): Found SDIO I/O device. Function count(1), memory(0)
[20:50:15.0138] IOSDIOIoCardDevice::parseFn0CISTuple(): Device manufacturer ID 0x2d0, Product ID 0x4329
[20:50:15.0138] IOSDIOIoCardDevice::parseFn0CISTuple(): Manufacturer: ""
[20:50:15.0138] IOSDIOIoCardDevice::parseFn0CISTuple(): Product: ""
[20:50:15.0138] IOSDIOIoCardDevice::parseFn0CISTuple(): ProductInfo0: "s=B1"
[20:50:15.0138] IOSDIOIoCardDevice::parseFn0CISTuple(): ProductInfo1: "P=N90 m=3.1 V=m"
[20:50:15.0138] AppleBCMWLANBusInterfaceSdio::start(): Started by: IOSDIOIoCardDevice, AppleBCMWLANV2-259 Jun 11 2014 20:13:01
[20:50:15.0138] AppleBCMWLANCore::init(): IO80211-46 Jun 11 2014 20:10:01
[20:50:15.0138] 000333.424645 wlan.N[0] AppleBCMWLANCore::start(): Starting with MAC Address: <<<mac address>>>
[20:50:15.0138] IO80211Peer::addPhyStatistics Phy stats started for addr <<<mac address>>>
[20:50:15.0138] IO80211Peer::addPhyStatistics Tx Completion stats started for addr <<<mac address>>>
[20:50:15.0138] IO80211PeerManager::initWithInterface cant add monitoring timer
[20:50:15.0138] Started logging for intf
[20:50:15.0138] IO80211PeerManager::initWithInterface: inited peer manager
[20:50:15.0138] IO80211Interface::init peerManager=0x939e8000
[20:50:15.0138] start:156
[20:50:15.0138] start:156
[20:50:15.0138] 000333.428295 wlan.N[1] AppleBCMWLANCore::setPowerStateGated(): powerState 1, fStateFlags 0x20, dev 0x8044f000 (this 1, provider 0)
[20:50:15.0138] 000333.428339 wlan.N[2] AppleBCMWLANCore::setPowerStateGated(): Received power state change before driver has initialized, ignoring
[20:50:15.0138] AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet
[20:50:15.0138] read new style signature 0x43313131 (line:389)
[20:50:15.0138] [FTL:MSG] VSVFL Register [OK]
[20:50:15.0138] [WMR:MSG] Metadata whitening is set in NAND signature
[20:50:15.0138] [FTL:MSG] VFL Init [OK]
[20:50:15.0138] display-scale = 2
[20:50:15.0138] display-rotation = 0
[20:50:15.0138] found applelogo at /usr/share/progressui/[email protected]
[20:50:15.0138] [FTL:MSG] VFL_Open [OK]
[20:50:15.0138] [FTL:MSG] YAFTL Register [OK]
[20:50:15.0138] found display: primary
[20:50:15.0138] display: 640 x 960
[20:50:15.0138] found PTP interface
[20:50:15.0138] AppleSynopsysOTGDevice - Configuration: PTP
[20:50:15.0138] AppleSynopsysOTGDevice Interface: PTP
[20:50:15.0138] AppleSynopsysOTGDevice - Configuration: iPod USB Interface
[20:50:15.0138] AppleSynopsysOTGDevice Interface: USBAudioControl
[20:50:15.0138] AppleSynopsysOTGDevice Interface: USBAudioStreaming
[20:50:15.0138] AppleSynopsysOTGDevice Interface: IapOverUsbHid
[20:50:15.0138] AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device
[20:50:15.0138] AppleSynopsysOTGDevice Interface: PTP
[20:50:15.0138] AppleSynopsysOTGDevice Interface: AppleUSBMux
[20:50:15.0138] AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device + Apple USB Ethernet
[20:50:15.0138] AppleSynopsysOTGDevice Interface: PTP
[20:50:15.0138] AppleSynopsysOTGDevice Interface: AppleUSBMux
[20:50:15.0138] AppleSynopsysOTGDevice Interface: AppleUSBEthernet
[20:50:15.0138] AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioControl
[20:50:15.0138] AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioStreaming
[20:50:15.0138] IOAccessoryPortUSB::start
[20:50:15.0138] AppleSynopsysOTGDevice::gated_registerFunction Register function IapOverUsbHid
[20:50:15.0138] virtual bool AppleUSBDeviceMux::start(IOService *) build: Jun 11 2014 20:11:28
[20:50:15.0138] init_waste
[20:50:15.0138] AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBMux
[20:50:15.0138] AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBEthernet
[20:50:15.0138] [FTL:MSG] FTL_Open [OK]
[20:50:15.0138] [NAND] _publishServices:642 FTL capabilities: 0x00000000
[20:50:15.0138] [nand_part_core:INF@ 157] published partition 0
[20:50:15.0138] [nand_part_core:INF@ 157] published partition 1
[20:50:15.0138] [nand_part_core:INF@ 157] published partition 2
[20:50:15.0138] [nand_part_core:INF@ 157] published partition 3
[20:50:15.0138] [nand_part_core:INF@ 157] published partition 5
[20:50:15.0138] [nand_part_core:INF@ 157] published partition 6
[20:50:15.0138] AppleSynopsysOTGDevice::gated_registerFunction Register function PTP
[20:50:15.0138] AppleSynopsysOTGDevice::startUSBStack Starting usb stack
[20:50:15.0138] IOReturn AppleUSBDeviceMux::setPropertiesGated(OSObject *) setting debug level to 7
[20:50:15.0138] [effaceable:INIT] found current generation, 182, in group 1
[20:50:15.0138] [effaceable:INIT] started
[20:50:15.0138] [effaceable:INIT] started
[20:50:15.0138] AppleARMBacklight::start: No AAP function
[20:50:15.0138] AppleUSBDeviceMux::handleConnectResult new session 0x95213580 established 62078<-lo0->49152 62078<-usb->4864
[20:50:15.0138] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x95213580
[20:50:15.0138] recv(13, 4) failed: connection closed
[20:50:15.0138] unable to read message size: -1
[20:50:15.0138] could not receive message
[20:50:15.0138] AppleUSBDeviceMux::handleConnectResult new session 0x95213580 established 62078<-lo0->49153 62078<-usb->5120
[20:50:15.0138] AppleUSBDeviceMux::handleConnectResult new session 0x952134d0 established 62078<-lo0->49154 62078<-usb->5376
[20:50:15.0138] AppleUSBDeviceMux::handleConnectResult new session 0x95213478 established 62078<-lo0->49155 62078<-usb->5632
[20:50:15.0138] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x95213580
[20:50:15.0138] AppleUSBDeviceMux::handleConnectResult new session 0x95213580 established 62078<-lo0->49156 62078<-usb->5888
[20:50:15.0138] recv(13, 4) failed: connection closed
[20:50:15.0138] unable to read message size: -1
[20:50:15.0138] could not receive message
[20:50:15.0138] AppleUSBDeviceMux::handleConnectResult new session 0x95213420 established 62078<-lo0->49157 62078<-usb->6144
[20:50:15.0138] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x95213478
[20:50:15.0138] recv(15, 4) failed: connection closed
[20:50:15.0138] unable to read message size: -1
[20:50:15.0138] could not receive message
[20:50:15.0138] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x95213580
[20:50:15.0138] recv(13, 4) failed: connection closed
[20:50:15.0138] unable to read message size: -1
[20:50:15.0138] could not receive message
[20:50:15.0138] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x952134d0
[20:50:15.0138] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x95213420
[20:50:15.0138] AppleUSBDeviceMux::handleConnectResult new session 0x95213420 established 62078<-lo0->49158 62078<-usb->6400
[20:50:15.0138] recv(14, 4) failed: connection closed
[20:50:15.0138] unable to read message size: -1
[20:50:15.0138] could not receive message
[20:50:15.0138] recv(16, 4) failed: connection closed
[20:50:15.0138] unable to read message size: -1
[20:50:15.0138] could not receive message
[20:50:15.0138] AppleUSBDeviceMux::handleConnectResult new session 0x952134d0 established 62078<-lo0->49159 62078<-usb->6656
[20:50:15.0138] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x952134d0
[20:50:15.0138] recv(14, 4) failed: connection closed
[20:50:15.0138] unable to read message size: -1
[20:50:15.0138] could not receive message
[20:50:15.0138] AppleUSBDeviceMux::handleConnectResult new session 0x952134d0 established 62078<-lo0->49160 62078<-usb->6912
[20:50:15.0138] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x952134d0
[20:50:15.0138] recv(14, 4) failed: connection closed
[20:50:15.0138] unable to read message size: -1
[20:50:15.0138] could not receive message
[20:50:15.0138] AppleUSBDeviceMux::handleConnectResult new session 0x952134d0 established 62078<-lo0->49161 62078<-usb->7168
[20:50:15.0138] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x952134d0
[20:50:15.0138] recv(7, 4) failed: connection closed
[20:50:15.0138] unable to read message size: -1
[20:50:15.0138] could not receive message
[20:50:15.0138] AppleUSBDeviceMux::handleConnectResult new session 0x952134d0 established 62078<-lo0->49162 62078<-usb->7424
[20:50:15.0138] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x952134d0
[20:50:15.0138] recv(7, 4) failed: connection closed
[20:50:15.0138] unable to read message size: -1
[20:50:15.0138] could not receive message
[20:50:15.0138] AppleUSBDeviceMux::handleConnectResult new session 0x952134d0 established 62078<-lo0->49163 62078<-usb->7680
[20:50:15.0138] unrecognized key 'BootArgs' in value query
[20:50:15.0138] failed to handle value query for key 'BootArgs', sending back empty response
[20:50:15.0138] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x952134d0
[20:50:15.0138] AppleUSBDeviceMux::handleConnectResult new session 0x952134d0 established 62078<-lo0->49164 62078<-usb->7936
[20:50:15.0138] recv(7, 4) failed: connection closed
[20:50:15.0138] unable to read message size: -1
[20:50:15.0138] could not receive message
[20:50:15.0138] unrecognized key 'MarketingPartNumber' in value query
[20:50:15.0138] failed to handle value query for key 'MarketingPartNumber', sending back empty response
[20:50:15.0138] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x952134d0
[20:50:15.0138] recv(7, 4) failed: connection closed
[20:50:15.0138] unable to read message size: -1
[20:50:15.0138] could not receive message
[20:50:15.0138] AppleUSBDeviceMux::handleConnectResult new session 0x952134d0 established 62078<-lo0->49165 62078<-usb->8192
[20:50:15.0138] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x952134d0
[20:50:15.0138] recv(7, 4) failed: connection closed
[20:50:15.0138] unable to read message size: -1
[20:50:15.0138] could not receive message
[20:50:15.0138] client protocol version 13
[20:50:15.0138] *** UUID A6457AB6-F30A-724E-8954-04B63CF72E04 ***
[20:50:15.0138] Restore options:
[20:50:15.0138] UUID => <CFString 0xe742b0 [0x2f2ae0]>{contents = "A6457AB6-F30A-724E-8954-04B63CF72E04"}
[20:50:15.0138] MinimumSystemPartition => <CFNumber 0xe74200 [0x2f2ae0]>{value = +1531, type = kCFNumberSInt64Type}
[20:50:15.0138] SystemPartitionSize => <CFNumber 0xe73b70 [0x2f2ae0]>{value = +1531, type = kCFNumberSInt64Type}
[20:50:15.0138] SystemPartitionPadding => <CFBasicHash 0xe75210 [0x2f2ae0]>{type = mutable dict, count = 5,
[20:50:15.0138] entries =>
[20:50:15.0138] 2 : <CFString 0xe74230 [0x2f2ae0]>{contents = "128"} = <CFNumber 0xe74260 [0x2f2ae0]>{value = +1280, type = kCFNumberSInt64Type}
[20:50:15.0138] 3 : <CFString 0xe741d0 [0x2f2ae0]>{contents = "16"} = <CFNumber 0xe73e70 [0x2f2ae0]>{value = +160, type = kCFNumberSInt64Type}
[20:50:15.0138] 4 : <CFString 0xe75dc0 [0x2f2ae0]>{contents = "32"} = <CFNumber 0xe737f0 [0x2f2ae0]>{value = +320, type = kCFNumberSInt64Type}
[20:50:15.0138] 5 : <CFString 0xe73c30 [0x2f2ae0]>{contents = "8"} = <CFNumber 0xe73b60 [0x2f2ae0]>{value = +80, type = kCFNumberSInt64Type}
[20:50:15.0138] 8 : <CFString 0xe73800 [0x2f2ae0]>{contents = "64"} = <CFNumber 0xe73c80 [0x2f2ae0]>{value = +640, type = kCFNumberSInt64Type}
[20:50:15.0138] }
[20:50:15.0138]
[20:50:15.0138] entering load_sep_os
[20:50:15.0138] device has no sep
[20:50:15.0138] entering partition_nand_device
[20:50:15.0138] device supports boot-from-NAND
[20:50:15.0138] nand device is already partitioned
[20:50:15.0138] entering wait_for_storage_device
[20:50:15.0138] Searching for NAND service
[20:50:15.0138] Found NAND service: IOFlashStoragePartition
[20:50:15.0138] NAND initialized. Waiting for devnode.
[20:50:15.0138] entering clear_remap_variable
[20:50:15.0138] executing /usr/sbin/nvram
[20:50:15.0138] entering format_effaceable_storage
[20:50:15.0138] effaceable storage is formatted, clearing it
[20:50:15.0138] effaceable storaged cleared
[20:50:15.0138] entering ramrod_probe_media
[20:50:15.0138] device partitioning scheme is GPT
[20:50:15.0138] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
[20:50:15.0138] executing /sbin/fsck_hfs
[20:50:15.0138] ** /dev/rdisk0s1s1
[20:50:15.0138] Executing fsck_hfs (version hfs-277.10.5).
[20:50:15.0138] ** Checking Journaled HFS Plus volume.
[20:50:15.0138] ** Detected a case-sensitive volume.
[20:50:15.0138] The volume name is Sochi11D257.N90OS
[20:50:15.0138] ** Checking extents overflow file.
[20:50:15.0138] ** Checking catalog file.
[20:50:15.0138] ** Checking multi-linked files.
[20:50:15.0138] ** Checking catalog hierarchy.
[20:50:15.0138] ** Checking extended attributes file.
[20:50:15.0138] ** Checking volume bitmap.
[20:50:15.0138] ** Checking volume information.
[20:50:15.0138] ** Trimming unused blocks.
[20:50:15.0138] ** The volume Sochi11D257.N90OS appears to be OK.
[20:50:15.0138] executing /sbin/mount_hfs
[20:50:15.0138] /dev/disk0s1s1 mounted on /mnt1
[20:50:15.0138] entering check_for_restore_log
[20:50:15.0138] found restore log (size = 29025)
[20:50:15.0138] entering unmount_filesystems
[20:50:15.0138] error unmounting '/mnt2': Invalid argument
[20:50:15.0138] entering clean_NAND
[20:50:15.0138] NAND format complete
[20:50:15.0138] entering ramrod_probe_media
[20:50:15.0138] find_filesystem_partitions: storage=/dev/disk0 system= data=
[20:50:15.0138] entering format_storage_for_LwVM
[20:50:15.0138] entering ramrod_probe_media
[20:50:15.0138] device partitioning scheme is GPT
[20:50:15.0138] unexpected partition 'LwVM' - skipping
[20:50:15.0138] find_filesystem_partitions: storage=/dev/disk0s1 system= data=
[20:50:15.0138] entering create_filesystem_partitions
[20:50:15.0138] User specified system partition size, skipping firmware extras size.
[20:50:15.0138] system partition padding size is: 167772160 bytes
[20:50:15.0138] unable to open : No such file or directory
[20:50:15.0138] creating 2 partitions
[20:50:15.0138] creating encrypted data partition
[20:50:15.0138] entering ramrod_probe_media
[20:50:15.0138] device partitioning scheme is GPT
[20:50:15.0138] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
[20:50:15.0138] wipe entire partition: 1 (old = 0 new = 1691)
[20:50:15.0138] block size for /dev/disk0s1s1: 8192
[20:50:15.0138] /sbin/newfs_hfs -s -v System -J -b 8192 -n a=8192,c=8192,e=8192 /dev/disk0s1s1
[20:50:15.0138] executing /sbin/newfs_hfs -s -v System -J -b 8192 -n a=8192,c=8192,e=8192 /dev/disk0s1s1
[20:50:15.0138] Initialized /dev/rdisk0s1s1 as a 2 GB case-sensitive HFS Plus volume with a 8192k journal
[20:50:15.0138] block size for /dev/disk0s1s2: 8192
[20:50:15.0138] /sbin/newfs_hfs -s -v Data -J -P -b 8192 -n a=8192,c=8192,e=8192 /dev/disk0s1s2
[20:50:15.0138] executing /sbin/newfs_hfs -s -v Data -J -P -b 8192 -n a=8192,c=8192,e=8192 /dev/disk0s1s2
[20:50:15.0138] Initialized /dev/rdisk0s1s2 as a 13 GB case-sensitive HFS Plus volume with a 8192k journal
[20:50:15.0138] entering ramrod_probe_media
[20:50:15.0138] device partitioning scheme is GPT
[20:50:15.0138] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
[20:50:15.0138] entering mount_filesystems
[20:50:15.0138] executing /sbin/fsck_hfs
[20:50:15.0138] ** /dev/rdisk0s1s1
[20:50:15.0138] Executing fsck_hfs (version hfs-277.10.5).
[20:50:15.0138] ** Checking Journaled HFS Plus volume.
[20:50:15.0138] ** Detected a case-sensitive volume.
[20:50:15.0138] The volume name is System
[20:50:15.0138] ** Checking extents overflow file.
[20:50:15.0138] ** Checking catalog file.
[20:50:15.0138] ** Checking multi-linked files.
[20:50:15.0138] ** Checking catalog hierarchy.
[20:50:15.0138] ** Checking extended attributes file.
[20:50:15.0138] ** Checking volume bitmap.
[20:50:15.0138] ** Checking volume information.
[20:50:15.0138] ** Trimming unused blocks.
[20:50:15.0138] ** The volume System appears to be OK.
[20:50:15.0138] executing /sbin/mount_hfs
[20:50:15.0138] /dev/disk0s1s1 mounted on /mnt1
[20:50:15.0138] executing /sbin/fsck_hfs
[20:50:15.0138] ** /dev/rdisk0s1s2
[20:50:15.0138] Executing fsck_hfs (version hfs-277.10.5).
[20:50:15.0138] ** Checking Journaled HFS Plus volume.
[20:50:15.0138] ** Detected a case-sensitive volume.
[20:50:15.0138] The volume name is Data
[20:50:15.0138] ** Checking extents overflow file.
[20:50:15.0138] ** Checking catalog file.
[20:50:15.0138] ** Checking multi-linked files.
[20:50:15.0138] ** Checking catalog hierarchy.
[20:50:15.0138] ** Checking extended attributes file.
[20:50:15.0138] ** Checking volume bitmap.
[20:50:15.0138] ** Checking volume information.
[20:50:15.0138] ** Trimming unused blocks.
[20:50:15.0138] ** The volume Data appears to be OK.
[20:50:15.0138] executing /sbin/mount_hfs
[20:50:15.0138] mount_hfs: Could not exec re-keying daemon /usr/libexec/rolld: No such file or directory
[20:50:15.0138] /dev/disk0s1s2 mounted on /mnt2
[20:50:15.0138] entering resize_system_partition_to_options
[20:50:15.0138] User specified system partition size, skipping firmware extras size.
[20:50:15.0138] Found SystemPartitionPadding value of 167772160 bytes
[20:50:15.0138] Erasing system partition prior to resize operation.
[20:50:15.0138] block size for /dev/disk0s1s1: 8192
[20:50:15.0138] /sbin/newfs_hfs -s -v System -J -b 8192 -n a=8192,c=8192,e=8192 /dev/disk0s1s1
[20:50:15.0138] executing /sbin/newfs_hfs -s -v System -J -b 8192 -n a=8192,c=8192,e=8192 /dev/disk0s1s1
[20:50:15.0138] Initialized /dev/rdisk0s1s1 as a 2 GB case-sensitive HFS Plus volume with a 8192k journal
[20:50:15.0138] executing /sbin/fsck_hfs
[20:50:15.0138] ** /dev/rdisk0s1s1
[20:50:15.0138] Executing fsck_hfs (version hfs-277.10.5).
[20:50:15.0138] ** Checking Journaled HFS Plus volume.
[20:50:15.0138] ** Detected a case-sensitive volume.
[20:50:15.0138] The volume name is System
[20:50:15.0138] ** Checking extents overflow file.
[20:50:15.0138] ** Checking catalog file.
[20:50:15.0138] ** Checking multi-linked files.
[20:50:15.0138] ** Checking catalog hierarchy.
[20:50:15.0138] ** Checking extended attributes file.
[20:50:15.0138] ** Checking volume bitmap.
[20:50:15.0138] ** Checking volume information.
[20:50:15.0138] ** Trimming unused blocks.
[20:50:15.0138] ** The volume System appears to be OK.
[20:50:15.0138] executing /sbin/mount_hfs
[20:50:15.0138] /dev/disk0s1s1 mounted on /mnt1
[20:50:15.0138] Trying to resize system partition to 1773142016 bytes aka 1691 MB
[20:50:15.0138] entering adjust_partition_preflight
[20:50:15.0138] partition:0 requiredSize=216448
[20:50:15.0138] no change in size
[20:50:15.0138] Successfully resized the system partition
[20:50:15.0138] entering maximize_data_partition
[20:50:15.0138] entering adjust_partition_preflight
[20:50:15.0138] partition:1 requiredSize=<<<<<IMEI>>>>>>8
[20:50:15.0138] maximizing data partition to 14181990399 bytes
[20:50:15.0138] entering adjust_partition_preflight
[20:50:15.0138] partition:1 requiredSize=1731200
[20:50:15.0138] no change in size
[20:50:15.0138] Successfully resized data partition to consume free blocks
[20:50:15.0138] The system partition now has a total HFS+ capacity of 1691 MB
[20:50:15.0138] entering ramrod_probe_media
[20:50:15.0138] device partitioning scheme is GPT
[20:50:15.0138] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
[20:50:15.0138] entering unmount_filesystems
[20:50:15.0138] entering ramrod_ticket_update
[20:50:15.0138] looking up root ticket hash
[20:50:15.0138] device tree ticket-hash: <CFData 0xe79d80 [0x2f2ae0]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
[20:50:15.0138] ticket_hash: <<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>
[20:50:15.0138] received valid ticket (2741 bytes)
[20:50:15.0138] entering restore_images
[20:50:15.0138] Successfully marked device node /dev/rdisk0s1s1 as static data
[20:50:15.0138] executing /usr/sbin/asr -source asr://localhost:12345 -target /dev/disk0s1s1 -erase -noprompt --chunkchecksum --puppetstrings
[20:50:15.0138] void AppleUSBDeviceMux::handleConnectResult(struct BulkUSBMuxSession *, errno_t) new session to port 12345 failed: 61
[20:50:15.0138] void AppleUSBDeviceMux::handleConnectResult(struct BulkUSBMuxSession *, errno_t) new session to port 12345 failed: 61
[20:50:15.0138] ASR: asr: Unable to disable idle sleep - -536870199
[20:50:15.0138] ASR STATUS: start 241.1 multicast-client
[20:50:15.0138] ASR: Waiting for connection attempt from server
[20:50:15.0138] AppleUSBDeviceMux::handleConnectResult new session 0x952130b0 established 12345<-lo0->49168 12345<-usb->8960
[20:50:15.0138] ASR STATUS: setup
[20:50:15.0138] ASR: Validating target...done
[20:50:15.0138] ASR STATUS: metadata
[20:50:15.0138] ASR: Validating source...
[20:50:15.0138] ASR: done
[20:50:15.0138] ASR: Retrieving scan information...done
[20:50:15.0138] ASR: Validating sizes...done
[20:50:15.0138] ASR STATUS: restore
[20:50:15.0138] ASR RESTORE PROGRESS: 2%
[20:50:15.0138] ASR RESTORE PROGRESS: 4%
[20:50:15.0138] ASR RESTORE PROGRESS: 6%
[20:50:15.0138] ASR RESTORE PROGRESS: 8%
[20:50:15.0138] ASR RESTORE PROGRESS: 10%
[20:50:15.0138] ASR RESTORE PROGRESS: 12%
[20:50:15.0138] ASR RESTORE PROGRESS: 14%
[20:50:15.0138] ASR RESTORE PROGRESS: 16%
[20:50:15.0138] ASR RESTORE PROGRESS: 18%
[20:50:15.0138] ASR RESTORE PROGRESS: 20%
[20:50:15.0138] ASR RESTORE PROGRESS: 22%
[20:50:15.0138] ASR RESTORE PROGRESS: 24%
[20:50:15.0138] ASR RESTORE PROGRESS: 26%
[20:50:15.0138] ASR RESTORE PROGRESS: 28%
[20:50:15.0138] ASR RESTORE PROGRESS: 30%
[20:50:15.0138] ASR RESTORE PROGRESS: 32%
[20:50:15.0138] ASR RESTORE PROGRESS: 34%
[20:50:15.0138] ASR RESTORE PROGRESS: 36%
[20:50:15.0138] ASR RESTORE PROGRESS: 38%
[20:50:15.0138] ASR RESTORE PROGRESS: 40%
[20:50:15.0138] ASR RESTORE PROGRESS: 42%
[20:50:15.0138] ASR RESTORE PROGRESS: 44%
[20:50:15.0138] ASR RESTORE PROGRESS: 46%
[20:50:15.0138] ASR RESTORE PROGRESS: 48%
[20:50:15.0138] ASR RESTORE PROGRESS: 50%
[20:50:15.0138] ASR RESTORE PROGRESS: 52%
[20:50:15.0138] ASR RESTORE PROGRESS: 54%
[20:50:15.0138] ASR RESTORE PROGRESS: 56%
[20:50:15.0138] ASR RESTORE PROGRESS: 58%
[20:50:15.0138] ASR RESTORE PROGRESS: 60%
[20:50:15.0138] ASR RESTORE PROGRESS: 62%
[20:50:15.0138] ASR RESTORE PROGRESS: 64%
[20:50:15.0138] ASR RESTORE PROGRESS: 66%
[20:50:15.0138] ASR RESTORE PROGRESS: 68%
[20:50:15.0138] ASR RESTORE PROGRESS: 70%
[20:50:15.0138] ASR RESTORE PROGRESS: 72%
[20:50:15.0138] ASR RESTORE PROGRESS: 74%
[20:50:15.0138] ASR RESTORE PROGRESS: 76%
[20:50:15.0138] ASR RESTORE PROGRESS: 78%
[20:50:15.0138] ASR RESTORE PROGRESS: 80%
[20:50:15.0138] ASR RESTORE PROGRESS: 82%
[20:50:15.0138] ASR RESTORE PROGRESS: 84%
[20:50:15.0138] ASR RESTORE PROGRESS: 86%
[20:50:15.0138] ASR RESTORE PROGRESS: 88%
[20:50:15.0138] ASR RESTORE PROGRESS: 90%
[20:50:15.0138] ASR RESTORE PROGRESS: 92%
[20:50:15.0138] ASR RESTORE PROGRESS: 94%
[20:50:15.0138] ASR RESTORE PROGRESS: 96%
[20:50:15.0138] ASR RESTORE PROGRESS: 98%
[20:50:15.0138] AppleUSBDeviceMux::sessionUpcall socket is closed, session 0x952130b0 (12345<-lo0->49168 12345<-usb->8960)
[20:50:15.0138] ASR RESTORE PROGRESS: 100%
[20:50:15.0138] ASR: Copied 1605403136 bytes in 197.51 seconds, 7937.88 KiB/s
[20:50:15.0138] ASR STATUS: verify
[20:50:15.0138] ASR VERIFY PROGRESS: 2%
[20:50:15.0138] ASR VERIFY PROGRESS: 4%
[20:50:15.0138] ASR VERIFY PROGRESS: 6%
[20:50:15.0138] ASR VERIFY PROGRESS: 8%
[20:50:15.0138] ASR VERIFY PROGRESS: 10%
[20:50:15.0138] ASR VERIFY PROGRESS: 12%
[20:50:15.0138] ASR VERIFY PROGRESS: 14%
[20:50:15.0138] ASR VERIFY PROGRESS: 16%
[20:50:15.0138] ASR VERIFY PROGRESS: 18%
[20:50:15.0138] ASR VERIFY PROGRESS: 20%
[20:50:15.0138] ASR VERIFY PROGRESS: 22%
[20:50:15.0138] ASR VERIFY PROGRESS: 24%
[20:50:15.0138] ASR VERIFY PROGRESS: 26%
[20:50:15.0138] ASR VERIFY PROGRESS: 28%
[20:50:15.0138] ASR VERIFY PROGRESS: 30%
[20:50:15.0138] ASR VERIFY PROGRESS: 32%
[20:50:15.0138] ASR VERIFY PROGRESS: 34%
[20:50:15.0138] ASR VERIFY PROGRESS: 36%
[20:50:15.0138] ASR VERIFY PROGRESS: 38%
[20:50:15.0138] ASR VERIFY PROGRESS: 40%
[20:50:15.0138] ASR VERIFY PROGRESS: 42%
[20:50:15.0138] ASR VERIFY PROGRESS: 44%
[20:50:15.0138] ASR VERIFY PROGRESS: 46%
[20:50:15.0138] ASR VERIFY PROGRESS: 48%
[20:50:15.0138] ASR VERIFY PROGRESS: 50%
[20:50:15.0138] ASR VERIFY PROGRESS: 52%
[20:50:15.0138] ASR VERIFY PROGRESS: 54%
[20:50:15.0138] ASR VERIFY PROGRESS: 56%
[20:50:15.0138] ASR VERIFY PROGRESS: 58%
[20:50:15.0138] ASR VERIFY PROGRESS: 60%
[20:50:15.0138] ASR VERIFY PROGRESS: 62%
[20:50:15.0138] ASR VERIFY PROGRESS: 64%
[20:50:15.0138] ASR VERIFY PROGRESS: 66%
[20:50:15.0138] ASR VERIFY PROGRESS: 68%
[20:50:15.0138] ASR VERIFY PROGRESS: 70%
[20:50:15.0138] ASR VERIFY PROGRESS: 72%
[20:50:15.0138] ASR VERIFY PROGRESS: 74%
[20:50:15.0138] ASR VERIFY PROGRESS: 76%
[20:50:15.0138] ASR VERIFY PROGRESS: 78%
[20:50:15.0138] ASR VERIFY PROGRESS: 80%
[20:50:15.0138] ASR VERIFY PROGRESS: 82%
[20:50:15.0138] ASR VERIFY PROGRESS: 84%
[20:50:15.0138] ASR VERIFY PROGRESS: 86%
[20:50:15.0138] ASR VERIFY PROGRESS: 88%
[20:50:15.0138] ASR VERIFY PROGRESS: 90%
[20:50:15.0138] ASR VERIFY PROGRESS: 92%
[20:50:15.0138] ASR VERIFY PROGRESS: 94%
[20:50:15.0138] ASR VERIFY PROGRESS: 96%
[20:50:15.0138] ASR VERIFY PROGRESS: 98%
[20:50:15.0138] ASR VERIFY PROGRESS: 100%
[20:50:15.0138] ASR: Verified SHA-1 checksum 1605403136 bytes in 40.96 seconds, 38271.93 KiB/s
[20:50:15.0138] ASR STATUS: finish
[20:50:15.0138] entering ramrod_probe_media
[20:50:15.0138] device partitioning scheme is GPT
[20:50:15.0138] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
[20:50:15.0138] entering mount_filesystems
[20:50:15.0138] executing /sbin/fsck_hfs
[20:50:15.0138] ** /dev/rdisk0s1s1
[20:50:15.0138] Executing fsck_hfs (version hfs-277.10.5).
[20:50:15.0138] ** Checking Journaled HFS Plus volume.
[20:50:15.0138] ** Detected a case-sensitive volume.
[20:50:15.0138] The volume name is Sochi11D257.N90OS
[20:50:15.0138] ** Checking extents overflow file.
[20:50:15.0138] ** Checking catalog file.
[20:50:15.0138] ** Checking multi-linked files.
[20:50:15.0138] ** Checking catalog hierarchy.
[20:50:15.0138] ** Checking extended attributes file.
[20:50:15.0138] ** Checking volume bitmap.
[20:50:15.0138] ** Checking volume information.
[20:50:15.0138] ** Trimming unused blocks.
[20:50:15.0138] ** The volume Sochi11D257.N90OS appears to be OK.
[20:50:15.0138] executing /sbin/mount_hfs
[20:50:15.0138] /dev/disk0s1s1 mounted on /mnt1
[20:50:15.0138] executing /sbin/fsck_hfs
[20:50:15.0138] ** /dev/rdisk0s1s2
[20:50:15.0138] Executing fsck_hfs (version hfs-277.10.5).
[20:50:15.0138] ** Checking Journaled HFS Plus volume.
[20:50:15.0138] ** Detected a case-sensitive volume.
[20:50:15.0138] The volume name is Data
[20:50:15.0138] ** Checking extents overflow file.
[20:50:15.0138] ** Checking catalog file.
[20:50:15.0138] ** Checking multi-linked files.
[20:50:15.0138] ** Checking catalog hierarchy.
[20:50:15.0138] ** Checking extended attributes file.
[20:50:15.0138] ** Checking volume bitmap.
[20:50:15.0138] ** Checking volume information.
[20:50:15.0138] ** Trimming unused blocks.
[20:50:15.0138] ** The volume Data appears to be OK.
[20:50:15.0138] executing /sbin/mount_hfs
[20:50:15.0138] mount_hfs: Could not exec re-keying daemon /usr/libexec/rolld: No such file or directory
[20:50:15.0138] /dev/disk0s1s2 mounted on /mnt2
[20:50:15.0138] entering install_kernel_cache
[20:50:15.0138] writing kernelcache to /mnt1/System/Library/Caches/com.apple.kernelcaches/kernelcache
[20:50:15.0138] entering install_secure_vault_daemon
[20:50:15.0138] entering get_hardware_platform
[20:50:15.0138] platform-name = s5l8930x
[20:50:15.0138] linking /mnt1/usr/sbin/securekeyvaultd to /mnt1/usr/sbin/securekeyvaultd.s5l8930x
[20:50:15.0138] no securekeyvaultd for s5l8930x
[20:50:15.0138] entering ramrod_ticket_write
[20:50:15.0138] writing ticket to /mnt1/System/Library/Caches/apticket.der
[20:50:15.0138] entering update_device_firmware
[20:50:15.0138] create_baseband_update_options: Got imeisv: 22
[20:50:15.0138] baseband updater options = <CFBasicHash 0xe773a0 [0x2f2ae0]>{type = mutable dict, count = 3,
[20:50:15.0138] entries =>
[20:50:15.0138] 0 : <CFString 0xec298 [0x2f2ae0]>{contents = "IMEISwVersion"} = <CFNumber 0xe7a7e0 [0x2f2ae0]>{value = +22, type = kCFNumberSInt32Type}
[20:50:15.0138] 1 : <CFString 0xec2f8 [0x2f2ae0]>{contents = "autoSetupEnv"} = <CFBoolean 0x2f2e98 [0x2f2ae0]>{value = false}
[20:50:15.0138] 2 : <CFString 0xec308 [0x2f2ae0]>{contents = "disablePing"} = <CFBoolean 0x2f2e90 [0x2f2ae0]>{value = true}
[20:50:15.0138] }
[20:50:15.0138]
[20:50:15.0138] _baseband_update_requires_system_filesystem_once: querying baseband to determine if it requires system filesystem
[20:50:15.0138] _baseband_update_requires_system_filesystem_once: query returned <CFBasicHash 0xe7a480 [0x2f2ae0]>{type = immutable dict, count = 1,
[20:50:15.0138] entries =>
[20:50:15.0138] 0 : <CFString 0xec068 [0x2f2ae0]>{contents = "requireSystemPartitionMount"} = <CFBoolean 0x2f2e98 [0x2f2ae0]>{value = false}
[20:50:15.0138] }
[20:50:15.0138]
[20:50:15.0138] entering update_iBoot
[20:50:15.0138] found 'AppleImage3NORAccess' object in IORegistry
[20:50:15.0138] entering update_iBoot_image3_NOR_access
[20:50:15.0138] write_image3_data: flashing illb data (length = 0x209d9)
[20:50:15.0138] write_image3_data: flashing SCAB data (length = 0xb00)
[20:50:15.0138] ticket updated
[20:50:15.0138] write_image3_data: flashing ibot data (length = 0x4518c)
[20:50:15.0138] write_image3_data: flashing chg1 data (length = 0x88cc)
[20:50:15.0138] write_image3_data: flashing bat0 data (length = 0xaa4c)
[20:50:15.0138] write_image3_data: flashing batF data (length = 0x1484c)
[20:50:15.0138] write_image3_data: flashing logo data (length = 0x1a8c)
[20:50:15.0138] write_image3_data: flashing recm data (length = 0x10f4c)
[20:50:15.0138] write_image3_data: flashing dtre data (length = 0x1240c)
[20:50:15.0138] write_image3_data: flashing chg0 data (length = 0x260c)
[20:50:15.0138] write_image3_data: flashing bat1 data (length = 0x80c)
[20:50:15.0138] write_image3_data: flashing glyP data (length = 0x2e4c)
[20:50:15.0138] AppleImage3NORAccess::_getSuperBlock imageVersion: 3
[20:50:15.0138] AppleImage3NORAccess::_getSuperBlock imageVersion: 3
[20:50:15.0138] [nand_part_core:INF@2289] first 2 pages of boot blocks written with copies of partition table
[20:50:15.0138] entering update_gas_gauge
[20:50:15.0138] entering update_ir_mcu
[20:50:15.0138] looking for mcu nub...no entry from path!
[20:50:15.0138] TiSerialFlasher not supported on this platform. Exiting.
[20:50:15.0138] entering update_baseband
[20:50:15.0138] update_baseband: registering for progress notifications
[20:50:15.0138] create_baseband_update_options: Got imeisv: 22
[20:50:15.0138] baseband updater options = <CFBasicHash 0xe7af30 [0x2f2ae0]>{type = mutable dict, count = 6,
[20:50:15.0138] entries =>
[20:50:15.0138] 0 : <CFString 0xec248 [0x2f2ae0]>{contents = "SystemRoot"} = <CFString 0xe76c40 [0x2f2ae0]>{contents = "/mnt1"}
[20:50:15.0138] 1 : <CFString 0xec298 [0x2f2ae0]>{contents = "IMEISwVersion"} = <CFNumber 0xe75180 [0x2f2ae0]>{value = +22, type = kCFNumberSInt32Type}
[20:50:15.0138] 2 : <CFString 0xec2f8 [0x2f2ae0]>{contents = "autoSetupEnv"} = <CFBoolean 0x2f2e98 [0x2f2ae0]>{value = false}
[20:50:15.0138] 3 : <CFString 0xec1d8 [0x2f2ae0]>{contents = "forceUpdate"} = <CFBoolean 0x2f2e90 [0x2f2ae0]>{value = true}
[20:50:15.0138] 5 : <CFString 0xec308 [0x2f2ae0]>{contents = "disablePing"} = <CFBoolean 0x2f2e90 [0x2f2ae0]>{value = true}
[20:50:15.0138] 6 : <CFString 0xec1f8 [0x2f2ae0]>{contents = "DisallowFusiing"} = <CFBoolean 0x2f2e90 [0x2f2ae0]>{value = true}
[20:50:15.0138] }
[20:50:15.0138]
[20:50:15.0138] update_baseband: querying baseband info
[20:50:15.0138] bbupdater: Opening device path /dev/cu.debug, using baud 115200
[20:50:15.0138] bbupdater: Configuring Hardware Mux...bbupdater: OK
[20:50:15.0138] bbupdater: [ 714981.281435 : 13.00]::: powercycle
[20:50:15.0138] bbupdater: - Ping failed, trying again, 48 tries left
[20:50:15.0138] bbupdater: - Ping OK
[20:50:15.0138] bbupdater: [ 714982.987679 : 13.01]::: Polled 1
[20:50:15.0138] bbupdater: Opening device path /dev/cu.debug, using baud 115200
[20:50:15.0138] bbupdater: [ 714Hi Md. Abdur Rahman,
Thanks for participating in the Apple Support Communities.
If your iPhone 4 is restarting unexpectedly, there are a few things to do depending on how frequently this is happening.
If it is restarting intermittently (from time to time), you may want to back up your data and restore the iPhone to factory settings:
Use iTunes to restore your iOS device to factory settings - Apple Support
If the same thing occurs, this article suggests contacting Apple Support for more help:
If your iOS device restarts, displays the Apple logo, or powers off while you're using it - Apple Support
Make sure your iOS device is up to date. If you still see this issue after updating, contact Apple Support.
Sincerely,
Jeremy -
Reception / Battery problems with iPhone 3GS after upgrading to iOS 4.2.1
There are major reception and battery problems with iPhone 3GS after upgrading to iOS 4.2.1.
I can not believe that Apple did not test this for major bugs like this one is.
I am a business user and can not effort to have bad reception. Apple wants to gain in the business clients... I never had this with my former BlackBerrys!
I need a reliable phone not a play thing like this is right now, it just needs it to work propely. And if a major bug like this comes along, fix it immediately. After the iPhone4 story, now this...incredible! Going back to my reliable BlackBerry! It just ain't reliable and takes forever to fix a problem.I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public. -
Good afternoon. I have a problem. During the upgrade Iphone 4 c IOS 4.3.5 to 5.0.1, I pulled the cord. Now I can not restore theIphone. Just lost imei, Wi-Fi, and phone became unusable. What should I do?
See if you can force the phone into recovery mode:
Turn your phone off. Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. -
Hi. I've got iPhone 5 64 Gb, and since I upgraded my iOS to iOS 7 I've got some problems as: iPhone stuck, suddenly exiting from apps and the worst - randomly resting my iPhone... What happen to my phone? How can I fix this soon as possible?
basic troubleshooting
Reset
Restore with back up
Rstore as new
all as required and as described in User guide -
Why am i having problems upgrading to ios6 on PC, iPad and iPhone?
why am i having problems upgrading to ios6 on PC, iPad and iPhone?
I am getting the message that 'An error occurred downloading iOS 6' on my iPad and iPhone when trying to update through Settings/General/Software Update. And when I try to download and install Version 10.7 on my PC I am getting the message that I have an 'invalid signature and unable to install the upgrade'.
-
HT201263 Help please! Problems with iPhone 4 after iOS 6 upgrade
Tried to upgrade iPhone. Got a message saying settings were lost, connect to iTunes. I did this and it said I had to restore. I did this and it said unable to restore due to unknown reason. Now phone keeps trying to upgrade and then restarts. iTunes doesn't recognise my phone.
I have tried all troubleshooting tips and nine work!
Please help!!same here..it doesnt work for me too!!
exactly same issue. Apple got something wrong with iOS 6 -
While upgrading iPhone OS from 5.1 to 5.1.1 on Win 7 using iTunes 10.6.1.7, the iPhone hung. I could not get iTunes to find it and Win 7 does not see it.
When I connect the iPhone to the USB, Win 7 issues the welcome sound, but that is it. The same happens when I disconnect iPhone.
The Devise Manager has the Apple Mobile Device USB Driver correct without any problem. I updated this driver called usbaapl64.
The iPhone is still hung.
I restarted the iPod service
I restarted the Apple Mobile Device Service
I tried to empty and delete the temp directory in C:\users\myname\AppData\Local\ but could not
The iTunes I am using is the latest version
I updated the Apple Mobile Device Driver as stated above correctly
The iPhone is still hung and is not recognized by Win 7 or iTunes, so I cannot restore the OS to the previous working version
What else can I do to restore the previous working OS on my iPhone 4I was connecting the iPhone 4 to a USB 3.0 port. I was told by Apple Express Support (at US$29.99) not to use USB 3.0 and to use USB 2.1 instead.
If you are connecting your iPhone to the computer using a USB 3.0 port, disconnect it immediately. iPhones will lock up if you try to update while using a connection through a USB 3.0 port.
Disconnect the iPhone from the computer
Go to Device Manager and find the connected USB port. Click the mouse right button and update the driver
Shut the iPhone by pressing the sleep button and the home button concurrently for some time
Move the USB cable to a USB 2.1 port or older without the iPhone.
Restart iTunes.
Connect the iPhone
Your computer should recognize the phone and reloads the correct USB 2.1 driver (Apple Mobile Device)
Then iTunes should recognize the iPhone and starts reloading the firmware.
When that is complete it may ask if you wish to restore, naturally you say YES
iTunes will restore the iOS
Using iTunes, restore the latest backup to get your data back.
When all of the above is completed. Start enjoying your iPhone.
If the above does not work. Throw your iPhone out of the window and get a replacement Android phone. -
After upgrade IPHONE 4 to IOS 7 , it work 2days, and now it is off, not recognized on the pc and no battery logo when connecting to the sector
I'm happy to say that I solved the problem, and for the community (for the "next generation" that will search a solution for this problem) - I will publish the solution for this problem : I defined as new iphone, and then the restore showed up!
All wishes everyone... -
Since upgrading Iphone to iOS 5.1.1 it does not automatically divert to my wi-fi internet when wifi is available in my home. It has been draining my mobile data I now have very high bills from my mobile carrier for high data usage. I can only manually change settings in the Network and turn cellular data on and off everytime I get home and leave the home. This is very frustrating as it wasn't a problem until the upgrade. I have spoken to a few people that this has happened to. Has anyone found this problem and does anyone have other solutions?
Please disregard this question. I'll submit a shorter and more direct question. Thanks.
-
error 1661 unable to sync application on iphone i upgraded iphon 3G to IOS 5
NOW not able to download applications
i am instructed not to upgrade ios or restoreHaving similar problem with iPad 2 after iOS7 upgrade, however App store is working, but not iTunes Store. I am guessing not a technical error. Any others having the same problem or have found a solution?
-
After IOS 5 upgrading Iphone we set up wireless network each time (WPA2 Enterprise)
Our company is connecting to wpa2 enterprise.
when we used IOS 4.XX we could connect wpa2 enterprise
but after upgrading IOS 5.0, it occured some problem.
Our staff should change a password per 3 month, at that time we should delete a network
but SSID set it up again each time and put a userID / Password when we connect wifi
i read other comment that user sloved problem using iPhone Configuration Utility in apple support communites but it bother our staff.
is there another sloution?Has anyone tried it? I would like to have an answer, I'm trying since Friday and is working properly.
-
When tried to upgrade iphone 4S from 8.1.2 to 8.1.3 it crushed at the middle.
After it it not let it tern on and cannot make recovery and crush in the middle of the process with "could not be restored. An unknown error occurred (3014)"Hi bahaluly,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like you are not able to update the iPhone. I would recommend that you read this article, it may be able to help the issue.
Get help with iOS update and restore errors - Apple Support
Solve network errors
Related errors: 17, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, 3200, or "There was a problem downloading the software," or "The device isn't eligible for the requested build." These alerts mean that your computer is either having difficulty contacting the Apple update server or communicating with your device.
Check your computer for software or settings that might cause communication issues between your computer and Apple or between your computer and your device.
Cheers,
Mario -
No Service Problem in iPhone After iOS 8
no service problem in iphone 4s after upgradeing to ios 8
tried all the tips which are given in iphone support and he sim card many times bt still face same problemHave you tried these?
http://www.iphonetopics.com/ipad-2-ios-8-no-service-bug/
Maybe you are looking for
-
I have an icloud account which I can access via the web but when I go to systems preferences and click on the icloud it sends me to the mobileme closed site?? How do I get it to go to my icloud log in?
-
Error while trying to index a bfile
hi, I have encountered the following error will trying to index a bfile . Following are the error messages, the listener.ora and creation script. I'm using a AIX Ver 4.3.3 J50 machine and my oracle version is 8.1.7 Thanks Creation Script SQL> create
-
How can I make a COPY/duplicate of an Event in iPhoto11
I need to make a copy of an 'event' I have in iPhoto on iMac. I want the original event in tacked; I want to remove photos on the COPY. Thanks - Jose
-
Multiple Downlopad from DMS Problem
Hi guys , I am uploading multiple files in DMS using bapi_document_create2. It is working perfectly fine. But the problem is when i want to download particular file from multiple uploaded files . i am not able to download selected files but a whole
-
Hi, guru! I'm prepare Portal for ESS(MSS)/EP <-> HR/ECC configuration. HR: ECC 6.0 sp14 all packages 600 sp14 EA-HR up to 603 sp10 EP: nw7.0 sp14 for ess/mss deployed in additional: SAPPCCUI_GP 600 SAP ESS 600 SAP MSS 600 BPERP5ESS14 BPERP5MSS14 BPER