Problems Using BDC ME51 or BAPI_REQUISITION_CREATE

Hello,
Mi problem is the following, I need to load PRs, which items are category: Services with account assignments: Proyects, the problem i'm having is with price conditions of each component...
Using the Bapi, it simply doesn't give me the option of loading this information (Conditions).
Using the a BDC recording of txn me51, it goes wild showing again and again the dynpro of the Account aSSIGNMENT on the WBS associated to the Service. (SAPLKACB 0200)
Regards,
Benjamin

Check the below link:
BAPI_REQUISITION_CREATE
Prakash.

Similar Messages

Problems using BDC and/or HR_INFOTYPE_OPERATION

Hi Gurus.
Our team is developing several inbound HR interfaces but in integrated test in QAS env something really strange is happening during the tests.
We are using BDC data for data input in infotypes 0000 and 0001 through PA30 and for all the other infotypes we use HR_INFOTYPE_OPERATION.
Sometimes data input for 0000 and 0001 works, sometimes no, our table log gives us that the data was processed but when we check on the infotypes there is no data there. The BDC mapping was checked several times and we did some tests in another enviroment, everything is ok, the data is processed but in QAS we are having this problems.
With HR_INFOTYPE_OPERATION, when we run in background mode it give us strange error logs like "a complex application error occurs" but when i did a debug inside of that FM there is nothing missing or nothing wrong.
The enviroment seems to be very instable but basis teams says that there is no log error, but i've never seems errors like these, sometimes works, sometimes no.
The last info that i had is QAS instance that we are using was deleted 3 weeks ago and restored again.
Any suggestions?
Thanks a lot.

Hi,
If your BDC mapping is correct, check the return code after your BDC is excuted with - BDCMSG. Make sure that you give Refresh BDCDATA for every loop.
Having said this, I have also had issues with BDC every there was no error at the end, however the infotype never got updated.
Please double check all the relevant screens. I found that for a particular Inf that I was updating, the subtypes belonged to differnt screens. Can you test with the same data in your Dev or some other box? If that doesnt work, there might be a data issue.
Generally the complex application error occurs when a screen have been modified to prohibit batch processing. It is very difficult to diagnose the error in such cases. Make sure that you are passing all the important data to the FM. You might be able to get more help by searching in this forums as well.
Regards, Liz

Change transaction using BDC-problem for large number of lines on screen

Hi All,
I am developing BAPI (using BDC) which creates quality notification in SAP which is entered via front end web application. Structure p_qmsm contain 3 lines of task in notification. The code is as given below. To avoid problem of large no of lines on screen,code lines starting with * is used. This actually for pagedown after entering every 2 lines and creates new line. so that 2 lines always push up on screen and there will not be problem for creating large no of lines on screen
perform bdc_dynpro using 'SAPLIQS0' '7200'.
perform bdc_field using 'BDC_OKCODE' '=10\TAB11'.
LOOP AT p_qmsm INTO wa_qmsm.
*IF wa_qmsm_cntr > 2.
       wa_qmsm_cntr = 2.
       perform bdc_dynpro using 'SAPLIQS0'                   '7204'.
       perform bdc_field   using 'BDC_OKCODE'                 '=PEND'.
ENDIF.
perform bdc_dynpro using 'SAPLIQS0' '7204'.
perform bdc_field using 'BDC_OKCODE' '/00'.
CONCATENATE 'VIQMSM-QSMNUM(' wa_qmsm_cntr ')' INTO wm_qmsm_qsmnum.
CONCATENATE 'VIQMSM-MNGRP(' wa_qmsm_cntr ')' INTO wm_qmsm_mngrp.
CONCATENATE 'VIQMSM-MNCOD(' wa_qmsm_cntr ')' INTO wm_qmsm_mncod.
CONCATENATE 'VIQMSM-MATXT(' wa_qmsm_cntr ')' INTO wm_qmsm_matxt.
perform bdc_field using wm_qmsm_qsmnum wa_qmsm-qsmnum.
perform bdc_field using wm_qmsm_mngrp wa_qmsm-mngrp.
perform bdc_field using wm_qmsm_mncod wa_qmsm-mncod.
perform bdc_field using wm_qmsm_matxt wa_qmsm-matxt.
wa_qmsm_cntr = wa_qmsm_cntr + 01.
ENDLOOP.
CALL TRANSACTION 'IQS2' USING wt_bdc
MODE 'N' UPDATE 'A' MESSAGES INTO P_MESSTAB.
The same code is used in modify mode also. web application is sending all 3 lines in modify mode even if single line is modified. It is already decided to send all rows back from web application to SAP in same sequence. It is working fine if i comment 5 lines which is starting with *. But in modify mode, how can i ensure that correct row is modified? and how can i achieve problem of large no of lines on screen?Please suggest?

Hi yogesh,
how can i ensure that correct row is modified?
1. For this we need to know two things ;
   a) the database table in which the entries are already stored
   b) the sequence in which they are displayed in the transaction.
2. So before changing any line, we need to compare (the primary key values / important values)
   a) as per the database table and as per the incoming data from web application (using bapi)
b) if the match is ok, it means that particular row was not modified, else modified.
how can i achieve problem of large no of lines on screen?
1. For this I am not sure about the transaction and its screen. Manytimes for appending row on the screen,
there is a PLUS + button on the grid toolbar. So for every entry, (inspite of some empty/filled rows already visible on the screen), we should use the + button, and this new row always appears on the top i.e. row number 1.
hope this helps.
regards,
amit m.

Problem with uploading data from excel using BDC for tcode f-02

Hi All,
I am uploading data from excel using BDC for tcode f-02. The problem here is, while recording, the values of some fields are recording twice. I dont know why it's happening so. But if I run my abap program, I have to give those fields twice in my excel sheet. Otherwise data does not upload. But it is not the feasible way. We must give those fields once in excel. Please tell me, how I can solve the issue.
With regards,
Rosaline.

Hi,
in BDC each and every action is recording. If your press enter in same screen that also recorded once aging may be this is your case repeating field values will appear. we can solve the problem for repeat fields like below.
suppose in your excel having repeated field X1 X2 X3 the X2 contains repeated field X3 means delete the X3 field.
Now In your itab having X1 and X2 fields. While in the LOOP the ITAB pass the X2 field to repeated the fields.
LOOP at ITAB to WA.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_CURSOR'.
bdcdata_wa-fval = 'RM08M-EBELN'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'INVFO-BLDAT'.
bdcdata_wa-fval = wa-X2." 1st time pass the X2 fields
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'INVFO-BLDAT'.
bdcdata_wa-fval = wa-X2." pass the same value to repeated field
APPEND bdcdata_wa TO bdcdata_tab.
Endloop.
Hope you can understand.
Regards,
Dhina..

Problem in uploading material master data using BDC?

Hi all,
I am using BDC call transaction method to upload material data. Here i am facing a problem that a value in the flat file is going to the wrong screen field . But my recording done properly.
In recording, after entering the data in the view BASIC DATA1 and trying to enter the text . For this i need to scroll down the scroll bar and after that i am clicking on basic data text and entering the text. Here i am not touching the languge field.
But the problem is the text to be entered into the basic data text is storing in language and giving error.
Please help me by specifying the reason and solution for this problem? Whether i did any mistake in recording in scrolling?
Thanks,
Vamshi.

Hi
Go with BAPI for such huge transactions and screens. Use BAPI: BAPI_MATERIAL_SAVEDATA.
Regards,
Vishwa.

Can anyone list problems/errors when uploading data using BDC's and BAPI's?

Can anyone list the problems/errors when uploading data using BDC's and BAPI's?

Hi,
If you are actually creating a BDC to load data pls be more specific.
Data format incorrect. Tab delimited/ etc
Dates in wrong formats
Currency incorrect formats
Missing screens
Wrong transaction code
File not found,
Missing Mandatory fields,
Screen resoultion.
You should always use refresh for your Bdcdata table.
Loop at internal table.
refresh Bdcdata.
regards,
sowjanya.

Problem during uploading data Using BDC

While I'm trying to upload data for T.Code J1IS using BDC, Value for the field Net.***.value ( J_1IASSVAL-J_1IVALNDP) is not getting populated on the screen.
Pls help.

Hi,
This is a Currency Field so you need to pass this to a Char field first and then pass to BDCTAB-FVAL.
" This is a common problem with BDC with other data types even with Date and Quantity and Numeric types
Please note while passing values to BDCTAB all the values should be passed in CHAR form only
Cheerz
Ram.

Problem uploding flatfile in bom(cs01) using bdc recording

Hi,
     I had a problem while uploading flatfile records in bom(cs01) by using bdc recording.
I had four records in flatfile(.txt & xl), i.e., header data with its components.
Sample material:
(Header data)                (components)
SOFTDRINKS,WIND,1, ' 14','1','ml','l'
SOFTDRINKS,WIND,1, '11','1','ml','l'
SOFTDRINKS,WIND,1, '13','1','ml','l'
SOFTDRINKS,WIND,1, ' 15','1','ml','l'
while executing, the same component entered while recording has been displayed four times not the ff records.
So, i want to know whether whether ff structure is ok or not,
whether coding is correct or not?
report ZBOM1
       no standard page heading line-size 255.
*include bdcrecx1.
DATA: BEGIN OF bdc OCCURS 0,
       matnr(18),
       werks(4),
       stlan(1),
      END OF BDC.
DATA: BEGIN OF BDC1 OCCURS 0,
       idnrk(40),
       MENGE(13),
       MEINS(3),
       postp(1),
      END OF bdc1.
DATA: BEGIN OF BDCDATA OCCURS 0,
         matnr(18),
         werks(4),
         stlan(1),
         idnrk(18),
         MENGE(18),
         MEINS(3),
         postp(1),
      END OF BDCDATA.
data: ibdcdata type standard table of bdcdata with header line.
*start-of-selection.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = 'C:\Documents and Settings\dilipkumar.b\Desktop\soft.txt'
   FILETYPE                       = 'ASC'
   HAS_FIELD_SEPARATOR            = ','
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
IGNORE_CERR                   = ABAP_TRUE
REPLACEMENT                   = '#'
CHECK_BOM                     = ' '
VIRUS_SCAN_PROFILE            =
NO_AUTH_CHECK                 = ' '
IMPORTING
FILELENGTH                     =
HEADER                         =
TABLES
    DATA_TAB                      = BDCDATA
EXCEPTIONS
FILE_OPEN_ERROR               = 1
FILE_READ_ERROR               = 2
NO_BATCH                      = 3
GUI_REFUSE_FILETRANSFER       = 4
INVALID_TYPE                  = 5
NO_AUTHORITY                  = 6
UNKNOWN_ERROR                 = 7
BAD_DATA_FORMAT               = 8
HEADER_NOT_ALLOWED            = 9
SEPARATOR_NOT_ALLOWED         = 10
HEADER_TOO_LONG               = 11
UNKNOWN_DP_ERROR              = 12
ACCESS_DENIED                 = 13
DP_OUT_OF_MEMORY              = 14
DISK_FULL                     = 15
DP_TIMEOUT                    = 16
OTHERS                        = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*perform open_group.
loop at bdcdata.
perform bdc_dynpro      using 'SAPLCSDI' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29N-STLAN'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RC29N-MATNR'
                              'SOFTDRINKS'.
perform bdc_field       using 'RC29N-WERKS'
                              'WIND'.
perform bdc_field       using 'RC29N-STLAN'
                              '1'.
perform bdc_field       using 'RC29N-DATUV'
                              '16.09.2008'.
perform bdc_dynpro      using 'SAPLCSDI' '0110'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RC29K-BMENG'
                              '1'.
perform bdc_field       using 'RC29K-STLST'
                              '1'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29K-EXSTL'.
perform bdc_dynpro      using 'SAPLCSDI' '0111'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29K-LABOR'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPLCSDI' '0140'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POSTP(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=FCBU'.
perform bdc_field       using 'RC29P-IDNRK(01)'
                              '11'.
perform bdc_field       using 'RC29P-MENGE(01)'
                              '1'.
perform bdc_field       using 'RC29P-MEINS(01)'
                              'ml'.
perform bdc_field       using 'RC29P-POSTP(01)'
                              'l'.
perform bdc_dynpro      using 'SAPLCSDI' '0130'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POSNR'.
perform bdc_field       using 'RC29P-POSNR'
                              '0010'.
perform bdc_field       using 'RC29P-IDNRK'
                              '11'.
perform bdc_field       using 'RC29P-MENGE'
                              '1'.
perform bdc_field       using 'RC29P-MEINS'
                              'ML'.
perform bdc_dynpro      using 'SAPLCSDI' '0131'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POTX1'.
perform bdc_field       using 'RC29P-SANKA'
                              'X'.
*perform bdc_transaction using 'CS01'.
*perform close_group.
CALL TRANSACTION 'CS01' USING IBDCDATA MODE 'A' UPDATE 'S'.
REFRESH IBDCDATA.
endloop.
       Start new screen                                              *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR iBDCDATA.
iBDCDATA-PROGRAM = PROGRAM.
iBDCDATA-DYNPRO   = DYNPRO.
iBDCDATA-DYNBEGIN = 'X'.
APPEND ibDCDATA .
ENDFORM.
       Insert field                                                  *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> NODATA.
    CLEAR iBDCDATA.
    iBDCDATA-FNAM = FNAM.
    iBDCDATA-FVAL = FVAL.
    APPEND iBDCDATA .
ENDIF.

Hi Dilip,
You are reading your flat file into an internal table, you perform a LOOP over the read itab, but you are not using your BDCDATA data anywhere into IBDCDATA internal table! Those data have to be filled into FVAL parameter.
Here an additional hint:
1. The content of flat file is delivered as a STRING in GUI_UPLOAD. First you have to post these values into a structured internal table. And then perform the LOOP at this structured table.
2. In the new ABAP concept newer ever user Header Lines (in an internal table). One reason: Header Lines are not allowed in ABAP Objects. Instead use
LOOP AT itab into wa_structure.
*do something with wa_structure
APPEND wa_structure to IBDCDATA.
ENDLOOP.
Good success,
Heinz

Problem copying/extending materials (MM01) using BDC

Hi,
I am developing a program that will be used to copy/extend material from one plant to another plant by using BDC. When i did it manually in MM01, i selected 8 views (Purchasing, MRP1, MRP2, MRP3, MRP4, General Plant Data/Storage 1, General Plant Data/Storage 2, Accounting 1 and Accounting 2) and marked the "Create views selected" checkbox. Then, the system prompted me for the plant and storage location information (copy from & copy to). After that, the Purchasing view appears and i would just need to click the "SAVE" button and the new material was created.
When i ran the BDC program (by selecting the "Call Transaction - Show all screens" option), i found that i had to run it four times to have the material created. Basically, i found that it went through four views which were purchasing, MRP, General Plant Data / Storage and Accouting view.
I was wondering why it didn't create the selected views for me although i had recorded the "Mark the 'create views selected' option" in the BDC?
Thanks much in advance.

Why choose BDC for MM01 ?
You've the BAPI 'BAPI_MATERIAL_SAVEDATA' at your service. Easy to use & simple to maintain.
Unless you give me specifics i am not convinced about the BDC approach.
BR,
Suhas

Problem with BDC on VA02

Hi All,
I am facing a problem with bdc on va02. After hitting enter on the first screen it pops an info message "consider subsequent douments". It doesn't get recorded in recorded. Hence I am not able to run the transaction with no screen mode. Please help me to suppress the info message
Navin

Hi Navin,
These kind of messages and pop ups are precisely the reason why use of BDC for updating transactions is NOT advisable.
If you were to bypass such messages, you would have to put a check to see why the message appears (in this case probably because the sales document flow for the sales order in table VBFA has some documents) and then write a logic to either handle the message or not.
Instead i would recommend you use the BAPI functions provided by SAP to change the sales order.
Have a look the BAPI for sales order change attached to the business object BUS2012. For this goto transaction SWO1 and enter the BUS2012 business object. Then goto methods and look for the "change" method. Double click on the method and look at the BAPI used to implement the method. Go ahead and use this method in your program as against a BDC.
I am sure it will be a much better option.
Otherwise if you still want to proceed with a BDC, please debug at the point where the message/pop up appears to ascertain reason for the same and then incorporate the same check in your program to handle the pop up.
Regards,
Aditya

Creation of PO using BDC with ME21N - Urgent

Hi All,
My requirement is to create a Purchase Order using BDC. I'm using ME21N for BDC. I did recording and using that recording I wrote a program for BDC. BDC table is populated correctly, but while calling ME21N using call transaction, program is cuming back to the selection screen, without creating PO. And sy-subrc value after call transaction is '0'. Please let me know the problem.
Thanks in Advance.
Siva Sankar.

Hi,
Put a break point after the call transaction statement(i.e, put break point on sy-subrc check)
and then check the message table.
if call transaction is suceessfull u will find a success messages in the I_messages table.
Regards,
Sriram

Problem in BDC for VA01 transaction TEXTS tab(Upgrading from 4.5b to ECC6)

Hi All,
I am working in upgrade project from 4.5b version to ECC6 version.
I am facing problem in TEXTS tab of VA01 transaction. In earlier version it is a table control containing of Language, Description & First line but, in ECC6 the screen is modified with texteditor, a list box for language key and a Text type at the left.
Now my problem is how to record this in BDC and how to read the text in the texteditor?
Thanks in Advance,
Ravi Kiran.

Hi Seshagiri,
In this case i would suggest the use of BAPI if there's no compulsion to use BDC.
BAPI_SALESORDER_CHANGE                     Sales order: Change Sales Order
BAPI_SALESORDER_CONFIRMDELVRY
BAPI_SALESORDER_CREATEFROMDAT1    Sales order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDAT2    Sales order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDATA    Create Sales Order, No More
BAPI_SALESORDER_GETLIST        Sales order: List of all Orders for Customer
BAPI_SALESORDER_GETSTATUS      Sales Order: Display Status
BAPI_SALESORDER_SIMULATE       Sales Order: Simulate Sales Order
try using these for creation or change of orders instead of bdcs.
hope this helps and revert for more clarifications if any.
<b>Always reward points to useful suggestions.</b>
regards,
Vikas

Problem in bdc PROG

Dear All,
            Iam facing the problem in BDC Program..the code is..
LOOP AT IT_RECORD.
perform bdc_dynpro      using 'SAPMF05A' '0300'.
perform bdc_field       using 'BDC_CURSOR' 'RF05A-NEWKO'.
perform bdc_field       using 'BDC_OKCODE' '/00'.
perform bdc_field       using 'BSEG-WRBTR'                IT_RECORD-vramt. "'100000'.
perform bdc_field       using 'RF05A-NEWBS'                          it_record-pkey. "'50'.
perform bdc_field       using 'RF05A-NEWKO'                          it_Record-vrac. "'24450024'.
perform bdc_field       using 'DKACB-FMORE'                          'X'.
perform bdc_dynpro      using 'SAPLKACB' '0002'.
perform bdc_field       using 'BDC_CURSOR' 'COBL-GSBER'.
perform bdc_field       using 'BDC_OKCODE' '=ENTE'.
perform bdc_field       using 'COBL-GSBER'                            it_record-gsber. "'KABA' .
COUNT = COUNT + 1.
WRITE:/ COUNT.
IF COUNT = 4.
perform bdc_dynpro      using 'SAPMF05A' '0302'.
perform bdc_field       using 'BDC_CURSOR'
                                'BSEG-GSBER'.
perform bdc_field       using 'BDC_OKCODE'
                                '/00'.
perform bdc_field       using 'BSEG-WRBTR'                        IT_RECORD-VRAMT.   "'50000'.
perform bdc_field       using 'BSEG-MWSKZ'                           '**'.
perform bdc_field       using 'BSEG-GSBER'                        IT_RECORD-GSBER ."'kaba'.
perform bdc_field       using 'BSEG-ZFBDT'                           '03.12.2007'.
perform bdc_dynpro      using 'SAPMF05A' '0302'.
perform bdc_field       using 'BDC_CURSOR'
                                'BSEG-WRBTR'.
perform bdc_field       using 'BDC_OKCODE'
                                '=BS'.
perform bdc_field       using 'BSEG-WRBTR'                          IT_RECORD-VRAMT. "'50,000.00'.
perform bdc_field       using 'BSEG-MWSKZ'
perform bdc_field       using 'BSEG-BUPLA'                            '1800'.
perform bdc_field       using 'BSEG-GSBER'                            IT_RECORD-GSBER."'KABA'.
perform bdc_field       using 'BSEG-ZFBDT'                            '03.12.2007'.
perform bdc_dynpro      using 'SAPMF05A' '0700'.
perform bdc_field       using 'BDC_CURSOR'
                                'RF05A-NEWBS'.
perform bdc_field       using 'BDC_OKCODE'
                                '=BU'.
CALL TRANSACTION 'F-02' USING BDCDATA MODE 'A'.
ELSE.
CONTINUE.
ENDIF.
ENDLOOP.
here iam using 4 line item(in text file) ..if count = 4 its not going to next screen, its repeating..its not simulating and posting the doc..
pls guide me friends.

hi i send the code here, if u can understand clear it..
report ZBDC_FI_MVF_02 no standard page heading line-size 255.
DATA : BEGIN OF IT_RECORDS OCCURS 0,
       BLDAT LIKE BKPF-BLDAT,
       BLART LIKE BKPF-BLART,
       BUKRS LIKE BKPF-BUKRS,
       BUDAT LIKE BKPF-BUDAT,
       MONAT LIKE BKPF-MONAT,
       WAERS LIKE BKPF-WAERS,
       NEWBS LIKE RF05A-NEWBS,
       NEWKO LIKE RF05A-NEWKO,
       END OF IT_RECORDS.
DATA : BEGIN OF IT_RECORD OCCURS 0,
       VRAMT(15), " LIKE BSEG-WRBTR,
       PKEY LIKE RF05A-NEWBS,
       VrAC(10), " LIKE RF05A-NEWKO,
       GSBER LIKE COBL-GSBER,
       END OF IT_RECORD.
DATA : BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
       DATE1 LIKE SY-DATUM,
       DATE2 LIKE SY-DATUM,
       LOOP(3).
       DATA : COUNT(3).
start-of-selection.
PERFORM GET_DATA1.
PERFORM GET_DATA2.
PERFORM PROCESS_DATA.
FORM PROCESS_DATA.
perform bdc_dynpro      using 'SAPMF05A' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RF05A-NEWKO'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
    date1 = it_RecordS-bldat.
    CONCATENATE DATE16(2) DATE14(2) DATE1+0(4) INTO DATE1.
perform bdc_field       using 'BKPF-BLDAT'               DATE1. "'03.12.2007'.
perform bdc_field       using 'BKPF-BLART'               IT_RECORDS-BLART. "'SA'.
perform bdc_field       using 'BKPF-BUKRS'               IT_RECORDS-BUKRS. "'1800'.
    date2 = it_RecordS-bUdat.
    CONCATENATE DATE26(2) DATE24(2) DATE2+0(4) INTO DATE2.
perform bdc_field       using 'BKPF-BUDAT'               DATE2. "'03.12.2007'.
perform bdc_field       using 'BKPF-MONAT'               IT_RECORDS-MONAT. "'9'.
perform bdc_field       using 'BKPF-WAERS'               IT_RECORDS-WAERS. "'INR'.
perform bdc_field       using 'FS006-DOCID'              '*'.
perform bdc_field       using 'RF05A-NEWBS'               IT_RECORDS-NEWBS. "'40'.
perform bdc_field       using 'RF05A-NEWKO'               IT_RECORDS-NEWKO. "'24450024'.
*perform bdc_field       using 'RF05A-NEWBS'               IT_RECORDS-PKEY. "'50'.
*perform bdc_field       using 'RF05A-NEWKO'               IT_RECORDS-VENAC. "'24450024'.
*perform bdc_field       using 'DKACB-FMORE' 'X'.
COUNT = '0'.
LOOP AT IT_RECORD.
perform bdc_dynpro      using 'SAPMF05A' '0300'.
perform bdc_field       using 'BDC_CURSOR' 'RF05A-NEWKO'.
perform bdc_field       using 'BDC_OKCODE' '/00'.
perform bdc_field       using 'BSEG-WRBTR'                IT_RECORD-vramt. "'100000'.
perform bdc_field       using 'RF05A-NEWBS'                          it_record-pkey. "'50'.
perform bdc_field       using 'RF05A-NEWKO'                          it_Record-vrac. "'24450024'.
perform bdc_field       using 'DKACB-FMORE'                          'X'.
perform bdc_dynpro      using 'SAPLKACB' '0002'.
perform bdc_field       using 'BDC_CURSOR' 'COBL-GSBER'.
perform bdc_field       using 'BDC_OKCODE' '=ENTE'.
perform bdc_field       using 'COBL-GSBER'                            it_record-gsber. "'KABA' .
COUNT = COUNT + 1.
IF COUNT = 4.
clear count.
perform bdc_dynpro      using 'SAPMF05A' '0302'.
perform bdc_field       using 'BDC_CURSOR'
                                'BSEG-GSBER'.
perform bdc_field       using 'BDC_OKCODE'
                                '/00'.
perform bdc_field       using 'BSEG-WRBTR'                        IT_RECORD-VRAMT.   "'50000'.
perform bdc_field       using 'BSEG-MWSKZ'                           '**'.
perform bdc_field       using 'BSEG-GSBER'                        IT_RECORD-GSBER ."'kaba'.
perform bdc_field       using 'BSEG-ZFBDT'                           '03.12.2007'.
perform bdc_dynpro      using 'SAPMF05A' '0302'.
perform bdc_field       using 'BDC_CURSOR'
                                'BSEG-WRBTR'.
perform bdc_field       using 'BDC_OKCODE'
                                '=BS'.
perform bdc_field       using 'BSEG-WRBTR'                          IT_RECORD-VRAMT. "'50,000.00'.
perform bdc_field       using 'BSEG-MWSKZ'
perform bdc_field       using 'BSEG-BUPLA'                            '1800'.
perform bdc_field       using 'BSEG-GSBER'                            IT_RECORD-GSBER."'KABA'.
perform bdc_field       using 'BSEG-ZFBDT'                            '03.12.2007'.
perform bdc_dynpro      using 'SAPMF05A' '0700'.
perform bdc_field       using 'BDC_CURSOR'
                                'RF05A-NEWBS'.
perform bdc_field       using 'BDC_OKCODE'
                                '=BU'.
CALL TRANSACTION 'F-02' USING BDCDATA MODE 'A'.
ELSE.
CONTINUE.
ENDIF.
ENDLOOP.
perform bdc_dynpro      using 'SAPMF05A' '0302'.
perform bdc_field       using 'BDC_CURSOR'
                               'BSEG-GSBER'.
perform bdc_field       using 'BDC_OKCODE'
                               '/00'.
perform bdc_field       using 'BSEG-WRBTR'                '50000'.
perform bdc_field       using 'BSEG-MWSKZ'                '**'.
perform bdc_field       using 'BSEG-GSBER'                'kaba'.
perform bdc_field       using 'BSEG-ZFBDT'                '03.12.2007'.
perform bdc_dynpro      using 'SAPMF05A' '0302'.
perform bdc_field       using 'BDC_CURSOR'
                               'BSEG-WRBTR'.
perform bdc_field       using 'BDC_OKCODE'
                               '=BS'.
perform bdc_field       using 'BSEG-WRBTR'                IT_RECORD-VRAMT. "'50,000.00'.
perform bdc_field       using 'BSEG-MWSKZ'                '**'.
perform bdc_field       using 'BSEG-BUPLA'                '1800'.
perform bdc_field       using 'BSEG-GSBER'                IT_RECORD-GSBER. "'KABA'.
perform bdc_field       using 'BSEG-ZFBDT'                '03.12.2007'.
perform bdc_dynpro      using 'SAPMF05A' '0700'.
perform bdc_field       using 'BDC_CURSOR'
                               'RF05A-NEWBS'.
perform bdc_field       using 'BDC_OKCODE'
                               '=BU'.
perform bdc_transaction using 'F-02'.
*CALL TRANSACTION 'F-02' USING BDCDATA MODE 'A'.
ENDFORM.
       Start new screen                                              *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO   = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM.
       Insert field                                                  *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> ' '.
    CLEAR BDCDATA.
    BDCDATA-FNAM = FNAM.
    BDCDATA-FVAL = FVAL.
    APPEND BDCDATA.
ENDIF.
ENDFORM.
*&      Form GET_DATA
form GET_DATA1 .
CALL FUNCTION 'UPLOAD'
   EXPORTING
     FILENAME                      = 'C:\MVF-02_1.txt'
     FILETYPE                      = 'DAT'
    TABLES
     data_tab                      = IT_RECORDS
   EXCEPTIONS
     CONVERSION_ERROR              = 1
     INVALID_TABLE_WIDTH           = 2
     INVALID_TYPE                  = 3
     NO_BATCH                      = 4
     UNKNOWN_ERROR                 = 5
     GUI_REFUSE_FILETRANSFER       = 6
     OTHERS                        = 7.
IF sy-subrc <> 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
     WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.                    " GET_DATA
*&      Form GET_DATA2
form GET_DATA2 .
CALL FUNCTION 'UPLOAD'
   EXPORTING
     FILENAME                      = 'C:\MVF-02_2.TXT'
     FILETYPE                      = 'DAT'
    TABLES
     data_tab                      = IT_RECORD
   EXCEPTIONS
     CONVERSION_ERROR              = 1
     INVALID_TABLE_WIDTH           = 2
     INVALID_TYPE                  = 3
     NO_BATCH                      = 4
     UNKNOWN_ERROR                 = 5
     GUI_REFUSE_FILETRANSFER       = 6
     OTHERS                        = 7
IF sy-subrc <> 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
     WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.                    " GET_DATA2

Problem in BDC Recording

Hi I am having a problem in BDC Recording. My requirement is that when I input data in transaction fb02 to block the invoices, It shows a list of invoices. Now i need to double click that item(line) in which PK = 06 at runtime during bdc recording. During BDC recording it takes the line number on which we have clicked which is constant but i want it dynamic that if item 1 is having PK=6, that line should be double clicked and if item 3 is having PK=6, the third item should be double clicked to open another screen. Kindly help me... Thanks in advance.

Hi Ravi,
While writing your code that is in your code you know which line number is having the PK = 06, then you can use the same line number and add the code for double click after that.
Regards,
Atish

Problem in bdc session method for tcode FS00

Hi Experts,
problem in bdc session method, when i run this program no output is shown.
Even it is not calling the transaction.
code as follows.
*& Report Z_GL_MASTER
*& CATEGORY         = BDC.
*& DESCRIPTION      = UPLOADING G/L MASTER RECORDS.
*& TECHNICAL CONST = FRANCIS REDDY.
*& FUNTIONAL CONST = FICO.
REPORT Z_GL_MASTER.
*& Internal Table
DATA : BEGIN OF IT_UPLOAD OCCURS 0,
       SAKNR LIKE GLACCOUNT_SCREEN_KEY-SAKNR,          " ACCOUNT NUMBER.
       BUKRS LIKE GLACCOUNT_SCREEN_KEY-BUKRS,          " COMPANY CODE.
       KTOKS LIKE GLACCOUNT_SCREEN_COA-KTOKS,           " ACCOUNT GROUP.
       XPLACCT LIKE GLACCOUNT_SCREEN_COA-XPLACCT,       " P&L STATEMEMENT.
       GVTYP LIKE GLACCOUNT_SCREEN_COA-GVTYP,          " P&L STATEMENT TYPE.
       XBILK LIKE GLACCOUNT_SCREEN_COA-XBILK,           " BALANCE SHEET STATEMENT
       SHORT LIKE GLACCOUNT_SCREEN_COA-TXT20_ML,        " SHORT TEXT.
       LONG LIKE GLACCOUNT_SCREEN_COA-TXT50_ML,         " LONG TEXT.
       WAERS LIKE GLACCOUNT_SCREEN_CCODE-WAERS,         " ACCOUNT CURRENCY.
       XSALH LIKE GLACCOUNT_SCREEN_CCODE-XSALH,         " ONLY BALANCES IN LOCAL CURRENCY.
       MITKZ LIKE GLACCOUNT_SCREEN_CCODE-MITKZ,         " RECONCILATION ACCOUNT FOR ACCOUNT TYPEGLACCOUNT_SCREEN_CCODE-MITKZ
       XOPVW LIKE GLACCOUNT_SCREEN_CCODE-XOPVW,         " OPEN ITEM MANAGEMENT.
       XKRES LIKE GLACCOUNT_SCREEN_CCODE-XKRES,         " LINE ITEM DISPLAY.
       ZUAWA LIKE GLACCOUNT_SCREEN_CCODE-ZUAWA,         " SORT KEY.
       FSTAG LIKE GLACCOUNT_SCREEN_CCODE-FSTAG,         " FIELD STATUS GROUP.
       XGKON LIKE GLACCOUNT_SCREEN_CCODE-XGKON,         " RELAVENT CASH FLOW.
       END OF IT_UPLOAD.
*& Internal Table FOR BDC DATA.
DATA : IT_BDCDATA TYPE BDCDATA OCCURS 0 WITH HEADER LINE.
*& DATA DECLARATIONS.
DATA : V_FILE LIKE RLGRAP-FILENAME.
*& SELECTION SCREEN.
PARAMETER : P_FILE LIKE V_FILE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
     PERFORM GET_FILENAME.
START-OF-SELECTION.
      PERFORM UPLOAD_DATA.
      PERFORM BDCDATA_OPEN.
      PERFORM BDC_POPULATE.
      PERFORM BDC_CLOSE.
*&      Form GET_FILENAME
form GET_FILENAME .
CALL FUNCTION 'F4_FILENAME'
   EXPORTING
     PROGRAM_NAME        = SYST-CPROG
     DYNPRO_NUMBER       = SYST-DYNNR
     FIELD_NAME          = 'P_FILE'
   IMPORTING
     FILE_NAME           = P_FILE.
endform.                    " GET_FILENAME
*&      Form UPLOAD_DATA
form UPLOAD_DATA .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
   FILENAME                      = P_FILE
   FILETYPE                      = 'DAT'
TABLES
    data_tab                     = IT_UPLOAD.
endform.                    " UPLOAD_DATA
*&      Form BDCDATA_OPEN
   FORM FOR BDC_OPEN_GROUP.
form BDCDATA_OPEN .
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
   CLIENT                    = SY-MANDT
   GROUP                     = 'GLMASTER'
   HOLDDATE                  = SY-DATUM
   KEEP                      = 'X'
   USER                      = SY-UNAME.
endform.                    " BDCDATA_OPEN
*&      Form BDC_POPULATE
POPULATING BDC DATA .
form BDC_POPULATE .
loop at it_upload.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_OKCODE' '=ACC_CRE'.
PERFORM BDC_SUB2 USING 'BDC_CURSOR' 'GLACCOUNT_SCREEN_KEY-SAKNR'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_KEY-SAKNR'    IT_UPLOAD-SAKNR.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_KEY-BUKRS'    IT_UPLOAD-BUKRS.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_OKCODE' '=2102_GROUP'.
PERFORM BDC_SUB2 USING 'BDC_CURSOR' 'GLACCOUNT_SCREEN_COA-KTOKS'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-KTOKS'    IT_UPLOAD-KTOKS.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-XPLACCT' IT_UPLOAD-XPLACCT.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_OKCODE' '=2102_BS_PL'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-GVTYP'    IT_UPLOAD-GVTYP.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-XBILK'    IT_UPLOAD-XBILK.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_CURSOR' 'GLACCOUNT_SCREEN_COA-TXT20_ML'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-TXT20_ML' IT_UPLOAD-SHORT.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-TXT50_ML' IT_UPLOAD-LONG.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_OKCODE' '=TAB02'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-WAERS' IT_UPLOAD-WAERS.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-XSALH' IT_UPLOAD-XSALH.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-MITKZ' IT_UPLOAD-MITKZ.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-XOPVW' IT_UPLOAD-XOPVW.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-XKRES' IT_UPLOAD-XKRES.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-ZUAWA' IT_UPLOAD-ZUAWA.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_OKCODE' '=TAB03'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-FSTAG' IT_UPLOAD-FSTAG.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-XGKON' IT_UPLOAD-XGKON.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
    TCODE                  = 'FS00'
   TABLES
     dynprotab              = IT_BDCDATA.
endloop.
endform.                    " BDC_POPULATE
*&      Form BDC_CLOSE
FORM FOR CLOSING BDC_GROUP
form BDC_CLOSE .
CALL FUNCTION 'BDC_CLOSE_GROUP'.
endform.                    " BDC_CLOSE
*&      Form BDC_SUB1
   FORM FOR BDCDATA.
form BDC_SUB1   USING A B C.
CLEAR IT_BDCDATA.
IT_BDCDATA-DYNBEGIN = A.
IT_BDCDATA-PROGRAM = B.
IT_BDCDATA-DYNPRO =   C.
APPEND IT_BDCDATA.
endform.                    " BDC_SUB1
*&      Form BDC_SUB2
      text
form BDC_SUB2   USING A B.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = A.
IT_BDCDATA-FVAL = B.
APPEND IT_BDCDATA.
endform.                    " BDC_SUB2
Points will be rewarded.
Thanks in advance.
Francis.

Hi,
Once the program is executed..It will a BDC session..
THen you have to use the transaction SM35..To process the BDC session..
Thanks,
Naren

Problems Using BDC ME51 or BAPI_REQUISITION_CREATE

Similar Messages

Maybe you are looking for