Problems while activating ABAP proxy
Hi All,
I am dealing with a problem while I am trying to activate a proxy in Sproxy tcode
Package Check for Table/Structure ZDT_ENVIO_DADOS_MESTRES_IN
The object TABL ZDT_ENVIO_DADOS_MESTRES_IN uses TTYP PRXCTRLTAB
Table Type PRXCTRLTAB
Package ZBW does not have sufficient use access
Does someone could help me on how to fix that ?
Regards
Diego
Hi Diego,
Add SAI_TOOLS under Use access.
Check the below link for more info.
http://help.sap.com/saphelp_nw04/helpdata/en/ea/c05da0f01011d3964000a0c94260a5/content.htm
Thanks,
Similar Messages
-
Error while activating ABAP proxy object
Hello,
I can see all the interfaces of PI7.0 in my ECC6.0 system.
I am able to create abap proxy object of a interface.
But when I try to activate that I am getting error as
"RFC system error for destination GTADIR_SERVER".
Pl can you suggest. appreciate quick help in this.
thanks in advance,
SharadaHi,
For more details take a look at note: [1063482 - Creating Dictionary objects - RFC error GTADIR_SERVER|https://service.sap.com/sap/support/notes/1063482]
It is written that: Message SGSUB 104 is not an error message, but is merely irrelevant information for customers. You can continue to create objects nevertheless.
To get rid of this annoying error you have to implement the corresponding support package.
Regards,
Jakub -
Problem while activating message mapping
Hi all,
I am facing a problem while activating message mapping in IR.It says Object being edited by XXXX and cannot be activated.It's giving my user name itself and even it doesn't allow to go to edit mode even.But I am not opening it twice.How to monitor all the XI users logged into the XI system and find the users using IR and ID objects.Please help in this regard.
Thanks.Hi Jaya
It is .....
http://<host:port>/rep/support/public/LockAdminService
Hope this helps !!!
Regards,
J Augastine -
Problems while generating the proxy definition
Hi Experts,
I am facing the error " Problems while generating the Proxy Definition! ", when creating the proxy definition, for a specific URL.
The URL to call the webservice is similar to "http://www3.XYZ.com/_vti_bin/newswebservice.asmx?WSDL" and is returning the appropriate XML code. Moreover accessing the webservice through browser, returns the expected response, too.
From the NWDS side, where we are creating the proxy, again, everything is fine, because we have already created two proxy definitions, in similar fashion, but for different WSDL links.
The only difference we are encountering is like, earlier the links were of type "www.abc.com/..." while the new URL is of type "www3.xyz.com/..." type. I hope this load balancing technique has hardly to do anything with it.
Any pointers for possible reasons and solutions will be of much help.
Regards,
Akhil MishraIf you are consuming a web service in NWDS look below document and check if you are not missing any step:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f0cf9e42-ccb0-2c10-d0a4-f5aa8a79e19a -
Activating ABAP Proxy between business system and XI
I have a question on the release of XI Add-on we need to install on the Business system side for activating ABAP Proxy. We are using XI 3.0 system and want to activate the ABAP Proxy between XI 3.0 system and the R3E system running on WAS 620 SP 45.
I read an excellent SDN Blog from Vijaya Kumari on how to activate the ABAP Proxy. It lists XI Add-on installation on the business system. The XI Add-on (SAPK-20006INAPPINT SP06) is what the XI 3.0 configuration guide refers to in OSS note 439915. Is there a newer XI Add-on to go with XI 3.0 system?
Thanks,
AsifHi Asif -
SAPK-20006INAPPINT(SP06) is the latest XI add-on (APPINT 200_620) available. Since your WAS 620 is on (SP45) and the prerequisite for SAPK-20006INAPPINT(SP06) is SAPKB62043, your system looks ready. But of course, refer to the mentioned Note - 439915.
>>><i>Is there a newer XI Add-on to go with XI 3.0 system?</i>
I'm not sure if this is the right question. Any Web AS 6.20 system will require the XI-add on to communicate to XI (2.0 or 3.0) - specifically regarding proxies. WebAS 6.40 systems do not require the add-on.
Let me know if you need any clarification.
Thanks.
Jin -
Having problem while activating my product please help
having problem while activating the product
gifted,
Depending on your version, you may try a chat here or here:
Creative Cloud support (all Creative Cloud customer service issues, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service-ccm.html
Serial number and activation support (non-CC, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service1.html -
How to active ABAP Proxy in SAP system.
Hi All,
I want to work with ABAP proxies.How to active ABAP proxy in SAP system.What the configuration is needed.Is there any configuration is need in XI system to work with ABAP proxies.Please help me..
Thanks,
Kishan.Hi Kishan,
You have to check whether ur r/3 system's(WAS 620 or above) excahnge profile has entries for integration builder.
Pls check the Example configuration for accessing
interfaces in the Integration Repository (exchange profile):
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/content.htm
If the Parameters are not there u need to add in the respective section's as provided in the link.
exchange profile URL is:
http://r3servername:5<instance>00/exchangeProfile
I hope this provides you a solution.
Regards.
Praveen -
Error while generating ABAP proxy
Hi,
We created a WSDL using lotus notes (Domino) tools. While creating a proxy object using ABAP (transaction SE80), we get the error message "Cannot generate proxy (object missing in WSDL, see long text)" Message no. SPRX084.
We looked at OSS notes and applied 1046046 - Proxy generation problem with external definitions and all dependent notes as we are on a lower support pack. (WAS 6.40. SAPKB64019).
We are wondering if it is anything to do with the format/defintions in the WSDL. Can anyone send me a sample WSDL file that has been used to create an ABAP proxy object successfully. We would like compare the domino generated file. Please note that XI is not involved, we are using ABAP to call a webservice in the internal network application.
Thanks,
GirishHi,
I've implemented this proxy without problem and it's working fine in my case (I didn't have to store WSDL file localy and do any changes in it - Netweaver 7.2). If it's not SAP issue as Brad proposed then maybe network admins have set filters that are blocking communication with this service
Best regards
Marcin Cholewczuk -
BI7.0 Hexdecimal values problem while activating the data in DSO
Hi Friends,
I've got the data upto PSA and i've run DTP also from PSA to DSO, but while activating the data in DSO from New Data Table to Active Data Table, it's giving the error given below:
Error when assigning SID: Action VAL_SID_CONVERT table
0DOC_HD_TXT
Value '1st disb' (hex. '00310073007400200064006900730062') of characteristic 0DOC_HD_TXT contains invalid characters
Process 000037 returned with errors.
it isn't accepting the values like with numberels and chars together
ex: 1st disb, 70 cr Gen Hsg.
I want the same to be in the report, how these are to be allowed?, i don't want to edit in PSA and there are a lot of values like that i can't edit all those, since there are thousands of records.
Regards,
BalajiReddyHi Anil,
Thanx for your quick replay, i've allowed ',' in RSKC and i've checked the check box LOWER CASE LETTERS for IO 0DOC_HD_TXT, the problem was almost solved out. What does ',' mean by?
Why lower case letter has to be checked only for this IO (0DOC_HD_TXT), not for others? if it is checked, it allows only lower cases, doesn't allow upper cases i think. won't there be any problem? if it is done like that?
pls tell me the reason, i'm really thankfull for your quick replay
Regards,
BalajiReddy -
Problem While Activating Transformation
Hi BW Gurus,
I am currently working on BW 7.0 on Purchasing Area, I found some problem while modifying the transformation or activating the transformation. I have mapped the data source 2LIS_02_SCL Purchasing Data (Schedule Line Level). I have written a routine for mapping rules of 0ORDER_VAL base on the source field of BWVORG, BWAPPLNM, BWEFFWR, BEDAT, WAERS, HWAER, WKURS. And it shows no error while syntax check. But while activating the Transformation it leads to dump. And after that if I try to change the routine, it leads me to the same dump.
Please advice.
For reference, find the code what I wrote in the routine below,
IF ( SOURCE_FIELDS-BWVORG = '001' or SOURCE_FIELDS-BWVORG = '011'
or SOURCE_FIELDS-BWVORG = '021' or SOURCE_FIELDS-BWVORG = '004'
or SOURCE_FIELDS-BWVORG = '014' or SOURCE_FIELDS-BWVORG = '024' )
AND SOURCE_FIELDS-BWAPPLNM EQ 'MM'
AND SOURCE_FIELDS-BWEFFWR 0.
PERFORM LOC_CURR_CONVERT
USING SOURCE_FIELDS-BWEFFWR
SOURCE_FIELDS-BEDAT
SOURCE_FIELDS-WAERS
SOURCE_FIELDS-HWAER
SOURCE_FIELDS-WKURS
CHANGING RESULT.
ENDIF.
where the LOC_CURR_CONVERT is given below
FORM LOC_CURR_CONVERT *
--> LC_DOCUMENT_VALUE *
--> LC_DATE *
--> LC_DOCUMENT_CURRENCY *
--> LC_LOCAL_CURRENCYY *
--> LC_RATE *
LC_LOCAL_VALUE *
FORM loc_curr_convert
USING lc_document_value
lc_date
lc_document_currency
value(lc_local_currency)
lc_rate
CHANGING lc_local_value.
conversion of lc_rate from floating-point to decimal. Necessary for *
call of CONVERT_TO_LOCAL_CURRENCY.
data lc_rate_dec type p decimals 5.
lc_rate_dec = lc_rate.
IF lc_document_currency = lc_local_currency
no conversion necessary -> Main case 1
AND NOT ( lc_document_currency IS INITIAL
OR lc_local_currency IS INITIAL ) .
lc_local_value = lc_document_value.
ELSEIF NOT ( lc_document_currency IS INITIAL
OR lc_local_currency IS INITIAL OR lc_date IS INITIAL ) .
conversion necessary with lc_date -> Normally not possible
CALL FUNCTION 'CONVERT_TO_LOCAL_CURRENCY'
EXPORTING
date = lc_date
foreign_amount = lc_document_value
foreign_currency = lc_document_currency
local_currency = lc_local_currency
rate = lc_rate_dec
IMPORTING
EXCHANGE_RATE =
local_amount = lc_local_value
EXCEPTIONS
NO_RATE_FOUND = 1
OVERFLOW = 2
NO_FACTORS_FOUND = 3
NO_SPREAD_FOUND = 4
DERIVED_2_TIMES = 5.
IF sy-subrc NE 0.
message a802 with lc_date lc_document_currency lc_local_currency
sy-subrc.
ENDIF.
ELSE.
if conversion not possible -> assign target values
lc_local_value = lc_document_value.
lc_local_currency = lc_document_currency.
ENDIF.
ENDFORM.
Thnaks
Regards,
Deep.Hi,
Please check routine if any for 0CO_REPLINE and also expert routine.
Regards,
Rema. -
Hello,
I Have a very strange error.
So i send a Message from Java Proxy ->to-> ABAP Proxy.
The Mapping is a XSLT Mapping.
The Mapping everthings fine but the ABAP Proxy get and error like:
Error during XML => ABAP conversion (; error ID: ; ( ))
....CREATE_TRANSACTIONS(1)IT_TRANSACTION(1)item(1)OPERATORQUAL(9) Error Text: Data loss occurred when converting 9134408 Kernel ErrorId: CONVT_DATA_LOSS))
Ok the error is normally not so strange, but in my XML Message the tag OPERATORQUAL is empty. The 9134408 ist the last filled tag for the OPERATORQUAL.
Why the ABAP Proxy think there is something in ?
I checked the XML and there is nothing.
But when the proxy think there is something like 9134408 that the error is normal, because the field has only except only 1 Char Values.
Any Idea whats going wrong?
Regards,
RobinHi Udo whats up ? ,
Mappings all works fine.
Problem was that blanks was there in the XML Tag that you can't see in the XML view.
This blanks came already from Database.
Know i kill all blanks in XSLT Mapping and it Works !
see you soon and regard from zagreb,
Robin -
Problem with Synchronous abap proxy time out
Hi there.
I have the following scenario:
sync sync
3rd party <--> PI <--
> ERP
http abap proxy
In the implementing class on the abap proxy i'm calling an standard BAPI, followed by a commit and returning the result.
The 3rd party app has a mechanism that when a message fails, he'll retry each 5 mins until it gets the response.
Last night there where some delays on ERP that cause the sync mesages to timeout, the 3rd party retried about 10 times to send the message until it finally went off. This morning i check and i have the same message 11 times on ERP!!, to my understanding if the sync comm timed out the process will abort and the message will not be processed on ERP, does anybody knows if im missing some configuration for this to work this way??.
Kind Regards,
Roberto.Hi Roberto.
There are a lot of time out configures in PI .
Follow the link that explain about this:
How to Investigate Timeouts In Synchronous XI PI Scenarios
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c059d583-a551-2c10-e095-eb5d95e03747
I hope to help you.
If you still keep this problem, you can ask me more about it.
Regards..
Bruno. -
Problem is triggering ABAP proxy
Hi All,
My scenario is to create a sales order in R/3 system using ABAP proxy and to get the Sales Order number as the response from the synchornous BAPI.
While triggering the proxy, I'm gettin the error as follows,
Please help me out in clearing this issue.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area<b>="ABAP">SERIALIZE_APPLICATION_DATA</b></SAP:Code>
<SAP:P1>Response Message</SAP:P1>
<SAP:P2>CX_XSLT_RUNTIME_ERROR</SAP:P2>
<SAP:P3>: 0000000000</SAP:P3>
<SAP:P4>Error Text: No valid XSLT program supplied Kernel ErrorId: CX_XSLT_RUNTIME_ERROR</SAP:P4>
<SAP:AdditionalText>Error when handling Response Message; XSLT error: CX_XSLT_RUNTIME_ERROR: XSLT program and source line: : 0000000000; Error Text: No valid XSLT program supplied Kernel ErrorId: CX_XSLT_RUNTIME_ERROR</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Regards,
DhanaHi
Go thru SAP Note:<b>546048</b>
It says that application data is incorrect tht's why can't post the message.
So plz chk ur ABAP Server Proxy code.
Regards
Arpit Seth -
Problem with Inbound Abap Proxy
Hi Experts,
I have an Inbound ABAP proxy scenario that insert data into a ztable. The whole process from XI to R/3 works fine, except it does not update my ztable.
The only time the ztable gets updated is when i debug it. I used this report "SPRX_TEST_INBOUND" to debug
Anyone who's had a similar problem.
Thank you in Advance,
DannyHi,
did you use the same XML from SXMB_MONI that gets posted during message flow?
you can check inside your inbound proxy if the values are not empty etc
and then raise an exception to see what's going on
you can also do an endless loop and get inside it to see the real values
that get passed into the proxy
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a> -
RFC problem while activating the new ODS...
Hi Experts,
I have created a new ODS, while activating that it is giving bellow error message,
RFC ERROR IN THE SOURCE SYSTEM.
but I have checked with my basis team, everything is fine,
What would be the problem.
helpful answer will be appreciated with points,
Thanks in advance,
Venkat.hi all,
iam even getting the same error and unable to solve this.please provide me solution with step wise process.iam getting the below error:
Message no. RSBM035
Diagnosis
The system could not create DataSource .
System Response
The metadata for a DataSource must be created while the export InfoSouce is being generated. An error occurred at that time.
Procedure
Consult the appropriate developer (function module: RSA1_OLTPSOURCE_GENERATE).
thanks®ards
Vamshi
Maybe you are looking for
-
Load-balancing between Analytical Provider service nodes in a cluster
Hi All, - First a little background on my architecture. My EPM environment consist of 3 Solaris servers: Server1: Foundation Services + APS + EAS + WLS Admin server Server2: Foundation Services + APS + EAS Server3: Essbase server + Essbase Studio ser
-
I wrote a little script which plays copies movie into RAM and plays it from. Requirements: - packages: mplayer bar(optional, can be replaced by normal cp command, bar is used only to show progress of coping to RAMfs) Preparation (replac
-
How do I Create a LightScribe Label ?
I found burning a LightScribe label after burning with iTunes directions. It says that iTunes works with Sonic Express Labeler. After burning the CD, a Create LightScribe Label window is supposed to appear. It does not. Why? Help!! HP Pavilion a1220n
-
Landscape orientation = portrait orientation?
I'd like my landscape and portrait orientations to look the exact same. I want the user to simply switch to landscape mode if she or he wants the book to be bigger. This is proving harder then it should be. Any help is well appreciated.
-
How do I change the target location on my desktop icons from IE to Firefox?
I have Windows XP