Problems while inserting data into Oracle10g RDF store

hi
I ran into this error again after it was fixed last time. Even this time it was the same error
ID: 9777 Error: java.sql.SQLException: ORA-13199: RDF:Error occurred
ORA-06512: at "MDSYS.MD", line 1723
ORA-06512: at "MDSYS.MDERR", line 17
ORA-06512: at "MDSYS.SDO_RDF_TRIPLE_S", line 98
I was been told that this problem will be fixed in the new version of Oracle RDF store , just wondering whether the new version has been released. Currently I am using Oracle10g .
triples causing errors :
<http://ncicb.nci.nih.gov/xml/owl/EVS/Thesaurus.owl#Receptor_Down_Regulation> <http://ncicb.nci.nih.gov/xml/owl/EVS/Thesaurus.owl#dDEFINITION> "<def-source>NCI</def-source><def-definition>Due to internalization of ligand-receptor complexes, increased receptor turnover, or decreased receptor expression following exposure to a ligand or agent, Receptor Down Regulation involves a decrease in the number of ligand-specific cellular proteins that bind to, and mediate, the effects of a regulatory molecule.</def-definition>" .
ID: 7528 Error: java.sql.SQLException: ORA-13199: RDF:Error occurred
ORA-06512: at "MDSYS.MD", line 1723
ORA-06512: at "MDSYS.MDERR", line 17
ORA-06512: at "MDSYS.SDO_RDF_TRIPLE_S", line 98
<http://ncicb.nci.nih.gov/xml/owl/EVS/Thesaurus.owl#EFP_Cell_Cycle_Pathway> <http://ncicb.nci.nih.gov/xml/owl/EVS/Thesaurus.owl#FULL_SYN> "<term-name>Estrogen-responsive protein Efp controls cell cycle and breast tumors growth</term-name><term-group>PT</term-group><term-source>BIOCARTA</term-source>" .
ID: 7525 Error: java.sql.SQLException: ORA-13199: RDF:Error occurred
ORA-06512: at "MDSYS.MD", line 1723
ORA-06512: at "MDSYS.MDERR", line 17
ORA-06512: at "MDSYS.SDO_RDF_TRIPLE_S", line 98
triples that did not throw any error while loading
<http://ncicb.nci.nih.gov/xml/owl/EVS/Thesaurus.owl#Hypercalcemia> <http://ncicb.nci.nih.gov/xml/owl/EVS/Thesaurus.owl#FULL_SYN> "<term-name>hypercalcemia</term-name><term-group>PT</term-group><term-source>NCI-GLOSS</term-source><source-code>CDR0000045363</source-code>" .
<http://ncicb.nci.nih.gov/xml/owl/EVS/Thesaurus.owl#Hypercalcemia> <http://ncicb.nci.nih.gov/xml/owl/EVS/Thesaurus.owl#FULL_SYN> "<term-name>Hypercalcemia</term-name><term-group>PT</term-group><term-source>NCI</term-source>" .
<http://ncicb.nci.nih.gov/xml/owl/EVS/Thesaurus.owl#Hypercalcemia> <http://www.w3.org/1999/02/22-rdf-syntax-ns#type> <http://www.w3.org/2002/07/owl#Class> .
thanks chandra

"RDF Error occurred" is a generic error message and might be from a number of causes (there are more meaningful error messages in the next patch release, 10.2.0.3). The likely cause is an error due to leading blanks in an object literal string or a null object literal string. For example " Oracle" and "" cause this error during load. This has been fixed in 10.2.0.3. A special patch including this and other fixes for RDF is being made available also. I will post details here as soon as it is ready.
For now, the best option might be to process your data and remove the leading blanks and re-write the null strings as "NULL" and re-try the load. The special RDF patch should be ready in a couple of weeks.

Similar Messages

Error while inserting data into a table.

Hi All,
I created a table.While inserting data into the table i am getting an error.Its telling "Create data Processing Function Module".Can any one help me regarding this?
Thanx in advance
anirudh

Hi Anirudh,
Seems there is already an entry in the Table with the same Primary Key.
INSERT Statement will give short dump if you try to insert data with same key.
Why dont you use MODIFY statement to achieve the same.
Reward points if this Helps.
Manish

Facing problem while loading data into XI

Hi All,
I am facing a peculiar problem while loading data into XI when we load small amount of data say 5-10 records these records gets processed, but when we try to load a bit higher volume say 100-500 which comes out to be around 7 record s per second then the record processing gets stalled. That is it gives a message that "recorded for outbound processing".
So can any body throw some light on it and can tell us why we rare facing such problem and how can we resolve that problem.
Thanks in Advance.
Regards
rahul

Hi rahul,
Deregistering and Registering the Queue is a temporary solution.
The better way to this would be to Tune your Xi system as already mentioned by Vijaya as mentioned in the guide ,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/70ada5ef-0201-0010-1f8b-c935e444b0ad
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7fdca26e-0601-0010-369d-b3fc87d3a2d9
Regards,
Bhavesh

Error while Inserting data into flow table

Hi All,
I am very new to ODI, I am facing lot of problem in my 1st interface. So I have many questions here, please forgive me if it has irritated to you.
========================
I am developing a simple Project to load a data from an input source file (csv) file into a staging table.
My plan is to achieve this in 3 interfaces:
1. Interface-1 : Load the data from an input source (csv) file into a staging table (say Stg_1)
2. Interface-2 : Read the data from the staging table (stg_1) apply the business rules to it and copy the processed records into another staging table (say stg_2)
3. Interface-3 : Copy the data from staging table (stg_2) into the target table (say Target) in the target database.
Question-1 : Is this approach correct?
========================
I don't have any key columns in the staging table (stg_1). When I tried to execute the Flow Control of this I got an error:
Flow Control not possible if no Key is declared in your Target Datastore
With one of the response (the response was - "FLOW control requires a KEY in the target table") in this Forum I have introduced a column called "Record_ID" and made it a Primary Key column into my staging table (stg_1) and my problem has been resolved.
Question-2 : Is a Key column compulsary in the target table? I am working in BO Data Integrator, there is no such compulsion ... I am little confused.
========================
Next, I have defined one Project level sequence. I have mapped the newly introduced key column Record_Id (Primary Key) with the Project level sequence. Now I am got another error of "CKM not selected".
For this, I have inserted "Insert Check (CKM)" knowledge module in my Project. With this the above problem of "CKM not selected" has been resolved.
Question-3 : When is this CKM knowledge module required?
========================
After this, the flow/interface is failing while loading data into the intermediar ODI created flow table (I$)
1 - Loading - SS_0 - Drop work table
2 - Loading - SS_0 - Create work table
3 - Loading - SS_0 - Load data
5 - Integration - FTE Actual data to Staging table - Drop flow table
6 - Integration - FTE Actual data to Staging table - Create flow table I$
7 - Integration - FTE Actual data to Staging table - Delete target table
8 - Integration - FTE Actual data to Staging table - Insert flow into I$ table
The Error is at Step-8 above. When opened the "Execution" tab for this step I found the message - "Missing parameter Project_1.FTE_Actual_Data_seq_NEXTVAL RECORD_ID".
Question-4 : What/why is this error? Did I made any mistake while creating a sequence?

Everyone is new and starts somewhere. And the community is there to help you.
1.) What is the idea of moving data from stg_1 and then to stg_2 ? Do you really need it for any other purpose other than move data from SourceFile to Target DB.
Otherwise, its simple to move data from SourceFile -> Target Table
2.) Does your Target table have a Key ?
3.) CKM (Check KM) is required when you want to do constraint validation (Checking) on your data. You can define constraints (business rules) on the target table and Flow Control will check the data that is flowing from Source File to Target table using the CKM. All the records that donot satisfy the constraint will be added to E$ (Error table) and will not be added to the Target table.
4.) Try to avoid ODI sequences. They are slow and arent scalable. Try to use Database sequence wherever possible. And use the DB sequence is target mapping as
<%=odiRef.getObjectName( "L" , "MY_DB_Sequence_Row" , "D" )%>.nextval
where MY_DB_Sequence_Row is the oracle sequence in the target schema.
HTH

Error while inserting data into BFILE datatype

Dear Experts,
I am trying to insert data into resume table, but it is throwing error:
create table resume(resume blob);
declare
f_lob bfile;
b_lob blob;
begin
insert into resume(resume) values(empty_blob())
return documents into b_lob;
f_lob := bfilename( 'RESUME_SAVE', 'Pawan-resume.doc' );
dbms_lob.fileopen(f_lob, dbms_lob.file_readonly);
dbms_lob.loadfromfile
( b_lob, f_lob, dbms_lob.getlength(f_lob) );
dbms_lob.fileclose(f_lob);
commit;
end;
return documents into b_lob;
ERROR at line 8:
ORA-06550: line 8, column 10:
PL/SQL: ORA-00904: "DOCUMENTS": invalid identifier
ORA-06550: line 7, column 2:
PL/SQL: SQL Statement ignored
Please help
Regards
Sunil Kumar

Thank you very much Mihael................... It works
But I think there is a mistake in oracle documentation, please check following link:
http://docs.oracle.com/cd/B10501_01/appdev.920/a96591/adl14cas.htm
Thanks & Regards
Sunil Kumar

Problem in inserting data into MySQL table

Hi All,
I have a table with just two fields FIRSTNAME and SECONDNAME in MySQL. I am accepting the First Name and Second Name in two text fields and then trying to insert them into the MySQL table. I have set the concurrency of the rowset to CONCUR_UPDATABLE and am using the code clip for Database row insert with the appropriate changes. When I run the application it doesnt give me any errors but the data is also not inserted in the table. Can someone pls help me out.
Loneliness wins the race :-)

This is my problem when inserting single row. What does it means ?
MusicInsert: com.mysql.jdbc.NotUpdatable: Result Set not updatable.This result set must come from a statement that was created with a result set type of ResultSet.CONCUR_UPDATABLE, the query must select only one table, and must select all primary keys from that table. See the JDBC 2.1 API Specification, section 5.6 for more details

Problem with inserting data into mySQL database with jsp

I have a jsp page that collects infromation about a users vehicle and puts the data into a mySQL database. Iv'e been messing around with it for ages & i can't seem to get it to work even though i cannot see anything wrong with the code, which can be seen below.
<%@ page contentType="text/html; charset=iso-8859-1" language="java" import="java.sql.*" errorPage="" %>
<%@ include file="Connections/connection.jsp" %>
<%
// *** Restrict Access To Page: Grant or deny access to this page
String MM_authorizedUsers="";
String MM_authFailedURL="login_form.jsp";
boolean MM_grantAccess=false;
if (session.getValue("MM_Username") != null && !session.getValue("MM_Username").equals("")) {
if (true || (session.getValue("MM_UserAuthorization")=="") ||
          (MM_authorizedUsers.indexOf((String)session.getValue("MM_UserAuthorization")) >=0)) {
    MM_grantAccess = true;
if (!MM_grantAccess) {
String MM_qsChar = "?";
if (MM_authFailedURL.indexOf("?") >= 0) MM_qsChar = "&";
String MM_referrer = request.getRequestURI();
if (request.getQueryString() != null) MM_referrer = MM_referrer + "?" + request.getQueryString();
MM_authFailedURL = MM_authFailedURL + MM_qsChar + "accessdenied=" + java.net.URLEncoder.encode(MM_referrer);
response.sendRedirect(response.encodeRedirectURL(MM_authFailedURL));
return;
String vehicle_details__registration = null;
if(request.getParameter("txt_registration") != null){ vehicle_details__registration = (String)request.getParameter("txt_registration");}
String vehicle_details__make = null;
if(request.getParameter("txt_make") != null){ vehicle_details__make = (String)request.getParameter("txt_make");}
String vehicle_details__model = null;
if(request.getParameter("txt_model") != null){ vehicle_details__model = (String)request.getParameter("txt_model");}
String vehicle_details__colour = null;
if(request.getParameter("txt_colour") != null){ vehicle_details__colour = (String)request.getParameter("txt_colour");}
String vehicle_details__tax_class = null;
if(request.getParameter("select_tax_class") != null){ vehicle_details__tax_class = (String)request.getParameter("select_tax_class");}
String vehicle_details__chasis_num = null;
if(request.getParameter("chasis_num") != null){ vehicle_details__chasis_num = (String)request.getParameter("chasis_num");}
String vehicle_details__status = null;
if(request.getParameter("radio_status") != null){ vehicle_details__status = (String)request.getParameter("radio_status");}
String owner_details__MMColParam = "1";
if (session.getValue("MM_Username") !=null) {owner_details__MMColParam = (String)session.getValue("MM_Username");}
Driver Drivervehicle_details = (Driver)Class.forName(MM_connection_DRIVER).newInstance();
Connection Connvehicle_details = DriverManager.getConnection(MM_connection_STRING,MM_connection_USERNAME,MM_connection_PASSWORD);
PreparedStatement vehicle_details = Connvehicle_details.prepareStatement("INSERT INTO vehicle_man_db.vehicle_details (registartion, make, model, colour, tax_class, chasis_num) VALUES ('"+ String vehicle_details__registration + "', '"+ String vehicle_details__make + "', '"+ String vehicle_details__model + "', '"+ String vehicle_details__colour + "', '"+ String vehicle_details__tax_class + "', '"+ String vehicle_details__chasis_num + "', '"+ String vehicle_details__status + "')");
vehicle_details.executeUpdate();
%>
<form name="add_vehicle_form" id="add_vehicle_form">
<p>Registration mark:
    <input name="txt_registration" type="text" id="txt_registration">
</p>
<p>Make:
    <input name="txt_make" type="text" id="txt_make">
</p>
<p>Model:
    <input name="txt_model" type="text" id="txt_model">
</p>
<p>Colour:
    <input name="txt_colour" type="text" id="txt_colour">
</p>
<p>Tax Class:
    <select name="select_tax_class" id="select_tax_class">
      <option value="AAA">Band AAA (up to 100g/km)</option>
      <option value="AA">Band AA (101 - 120g/km)</option>
      <option value="A">Band A (121 - 150g/km)</option>
      <option value="B">Band B (151 - 165g/km)</option>
      <option value="C">Band C (166 - 185g/km)</option>
      <option value="D">Band D (Over 185g/km)</option>
    </select>
</p>
<p>Chasis Number:
    <input name="txt_chassis_num" type="text" id="txt_chassis_num">
</p>
<p>Status: active:
    <input name="radio_status" type="radio" value="1" checked>
    off-road
    <input name="radio_status" type="radio" value="0">
</p>
<p>
    <input type="submit" name="Submit" value="Submit">
</p>
</form>
<%
Connvehicle_details.close();
%>This is the error I am getting from the server
org.apache.jasper.JasperException: Unable to compile class for JSP
An error occurred at line: 3 in the jsp file: /add_vehicle_form.jsp
Generated servlet error:
C:\Servers\Tomcat 5.0\work\Catalina\localhost\Assignment\org\apache\jsp\add_005fvehicle_005fform_jsp.java:113: ')' expected
PreparedStatement vehicle_details = Connvehicle_details.prepareStatement("INSERT INTO vehicle_man_db.vehicle_details (registartion, make, model, colour, tax_class, chasis_num) VALUES ('"+ String vehicle_details__registration + "', '"+ String vehicle_details__make + "', '"+ String vehicle_details__model + "', '"+ String vehicle_details__colour + "', '"+ String vehicle_details__tax_class + "', '"+ String vehicle_details__chasis_num + "', '"+ String vehicle_details__status + "')");
^
1 error
     org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:84)
     org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:332)
     org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:412)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:472)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:451)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:439)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:511)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:295)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
Any help would be much appreciated.
Thanks

use this ...
PreparedStatement vehicle_details =
Connvehicle_details.prepareStatement("INSERT INTO
vehicle_man_db.vehicle_details (registartion, make,
model, colour, tax_class, chasis_num) VALUES
vehicle_details .setString(1,String
vehicle_details__registration );
vehicle_details setString(2,String
vehicle_details__make );
vehicle_details .setString(3,String
vehicle_details__model );
vehicle_details .setString(4,vehicle_details__colour
vehicle_details .setString(5,String
vehicle_details__tax_class);
vehicle_details .setString(6,String
vehicle_details__chasis_num );
vehicle_details .executeQuery();Even you need a screwing up... what's the point putting that String inside. That's the bloody error.

Error While Inserting Data into table using OAF

Hi Experts,
I am learning OAF; i am trying into insert the data into table using OAF. I followed the below procedure.
My table(OLF_TEST_TBL) Columns:
EmpID (Number), Ename(VARCHAR2 100), Sal Number, and who columns.
1. created Application Module (AM).
package: oracle.apps.mfg.simplepg.server
name: oaf_test_tbl_am
2. created simple page
name:EmployeePG
package:oracle.apps.mfg.simplepg.webui
3. Assigned the Application Module to Page
4. Created Entity Object(EO)
name:oaf_test_tbl_eo
package:oracle.apps.mfg.simplepg.schema.server
schema:apps
table:OLF_TEST_TBL
note:
1. EMPID column is selected as primary key
2. selected create method, remove method and validation method.
3.checked generate default view object
VO:
name:olf_test_tbl_vo
note: Entity Object was assigned to VO
Coming To page:
page main region:EmployeeMainRN
1.under main region i created one more region using wizard
selected AM and VO, region style-default single column
2. under main region i created one more region
region style- pagebuttonbar, ID:pagebutoonsRN
3. under pagebuttonRN, created two submit buttons(ID:SUBMIT, ID:CANCEL).
In AM java page:
created a method to insert row and for commit.
Insert Method:
public void insertrow(){
OAViewObject vo=(OAViewObject)getoaf_test_tbl_vo1();
if(!vo.isPreparedForExecution()){
vo.executeQuery();
Row row=vo.createRow();
vo.insertRow(row);
row.setNewRowState(Row.STATUS_INITIALIZED);
Commit Method:
public void savaDataTooaftesttable(){
getDBTransaction().commit();
In EmployeeMainRN, created a controller.
In this controller process request method, 'insertrow' method was called.
import oracle.apps.fnd.framework.OAApplicationModule;
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
if (!pageContext.isFormSubmission())
OAApplicationModule am = pageContext.getApplicationModule(webBean);
am.invokeMethod("insertrow");
To commit the transaction when SUBMIT button pressed, commit method was called in process form request method.
import oracle.apps.fnd.framework.OAViewObject;
public void processformRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
OAApplicationModule am = pageContext.getApplicationModule(webBean);
if (pageContext.getParameter("SUBMIT") != null)
am.invokemethod("savaDataTooaftesttable");
Error After clicking the submit button_
I ran the page, page was opened successfully. Once i enter data and click submit button, it's giving the following error.
The requested page contains stale data. This error could have been caused through the use of the browser's navigation buttons (the browser Back button, for example). If the browser's navigation buttons were not used, this error could have been caused by coding mistakes in application code. Please check Supporting the Browser Back Button developer guide - View Object Primary Key Comparison section to review the primary causes of this error and correct the coding mistakes.
Cause:
The view object oaf_test_tbl_am.oaf_test_tbl_vo1700_oaf_test_tbl_vo1_practice_test_prc1_oracle_apps_mfg_simplepg_server_oaf_test_tbl_am.oaf_test_tbl_vo1 contained no record. The displayed records may have been deleted, or the current record for the view object may not have been properly initialized.
To proceed, please select the Home link at the top of the application page to return to the main menu. Then, access this page again using the application's navigation controls (menu, links, and so on) instead of using the browser's navigation controls like Back and Forward.
Experts, Kindly help me why i am getting this error.
Awating your replies.
Thanks in advance.

If you dont want to create message. You can throw exception like below as well
throw new OAException("Emp Id is "+empId+" and employee name is "+empName, OAException.CONFIRMATION);Thanks
--Anil

Time Stamp problem while writing data into the excel file

Hii, All
I am taking the data from the DAQ card of the TOPSCCC with the 8 ms of scanrate for each channel and there are total 16 no of Analog channels in the Card, now i am acquiring the data from the card, time stamping it and writing it into the excel file, which is tab delimited, now the problem is, the data which are in the excel file have the same timestamp for 4 to 5 continuous records, instead we want each data with the different and continuous time stamp with same difference of time stamp between two records, mean if it is difference of 8 ms then it should be the 8 ms for all, but here it is taking the differnce of 16 ms for two samples and giving same time stamp for four to five records and that shouldn't happen, here i am attaching my vi, drivers for the cards and Excel file with the data, can you please give me any suggestion how to do it?
Please help me i require this suggestion as early as possible, i am requiring it urgently.
Thanks in Advance,
Nishant
Attachments:
2026vi.llb ‏319 KB
2026_ScanMultAD_Demo_time.vi ‏80 KB
Data.xls ‏357 KB

Hello Nishant,
that's what I meant:
Message Edited by GerdW on 05-16-2006 10:32 AM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
timestamp-array.png ‏2 KB

Error in native SQL while inserting data into CORP table

HI all,
I am getting an exception while inserting records using native SQL into CORP table.
PFB the code.
LOOP AT gi_hrp1001 INTO wa_hrp1001.
TRY.
        EXEC SQL.
          INSERT INTO misuser.Table_4
          VALUES (wa_hrp1001-otype , wa_hrp1001-objid ).
        ENDEXEC.
      CATCH cx_sy_native_sql_error.
        MESSAGE 'Connect - Error ' TYPE 'E'.
    ENDTRY.
ENDLOOP.
Please help.
Thanks & Regards
Nitesh

I see two issue with your Insert. 1) you need to specify the field names in the table, for example otype and objid. 2) You need to indicate in the VALUES that you're using host variables by using the prefix :.
I think the correct syntax is:
        EXEC SQL.
          INSERT INTO misuser.Table_4
         (otype, objid)
          VALUES (:wa_hrp1001-otype, :wa_hrp1001-objid)
        ENDEXEC.
Good luck.

Problem while inserting data for some datatypes in Oracle 10g

Hi
I was trying to insert data in database for all the data types defined in Oracle 10g.
I was successful in maximum cases.
I was not able to insert data for following datatypes:
1 Long varraw
2 string
3 varraw
4 varnum
5 charz
6 unsigned int
7 native double
8 native float
Please put some light on it.
Thanks,
Gyanendra

Hi Subin,
You can try couple of things.
If your data is less than 32767, you can pass it to stored procedure and change it to clob type like
PROCEDURE CLOBQUERY
Param IN CLOB,
and you can call Procedure
EXECUTE CLOBQUERY '[Param.1]'
If your data is around than 1000000(32767*32), you can break the data in length of 32767 and pass it to param 1 to 32 like
EXECUTE CLOBQUERY '[Param.1][Param.2][Param.3]..[Param.32]'
Finally you can try to update jdbc drive.
check the link Link: [JDBC Limitation|http://confluence.atlassian.com/display/JIRA/UsingOracle10gdriverstosolvethe4000character+limitation]

Problem while inserting Date/Time in Oracle Database

Hai,
i want to insert the date and time in a date column. here, i am using java.sql.Date and java.sql.Time to assign the date in Prepared Statement.
PreparedStatement psmt=con.prepareStatement("insert into test(ex_date) values(?)");
java.util.Calendar c=Calendar.getInstance();
c.set(2002,2,21,10,10,00);
java.sql.Date d=new Date(c.getTime().getTime());
java.sql.Time t=new Time(c.getTime().getTime());
psmt.clearParameters();
psmt.setDate(1,d);
psmt.setDate(1,t);
psmt.executeUpdate();
Above program is inserted the Date and time in the database as the following "1900/2/21 10:10 AM"
but i am giving the year as 2002. it inserted the year as 1900. what is the problem with the code?
please let me know
Thanks in advance.
Regards
sankarjune14

Hai Franco,
i put the wrong code. Here, is the Original Code.
PreparedStatement psmt=con.prepareStatement("insert into test(ex_date) values(?)");
java.util.Calendar c=Calendar.getInstance();
c.set(2002,2,21,10,10,00);
java.sql.Date d=new Date(c.getTime().getTime());
java.sql.Time t=new Time(c.getTime().getTime());
psmt.clearParameters();
psmt.setDate(1,d);
psmt.setTime(1,t); // Last time i put psmt.setDate(1,t);
psmt.executeUpdate();
and, the getTimeInMillis() method is a protected method in java.util.Calendar class. how can we use it
please give me some other idea to insert the date and time in oracle database.
Thanks in advance
sankarjune14

Problem to insert data into database

hi all ,
I had the two following xmls.
SELECT XMLELEMENT("PUR_ORDER_INFO",
XMLFOREST (PUR_ORDER_ID ,PUR_ORDER_STATTUS ))
FROM T_PUR_ORDER
WHERE PUR_ORDER_ID = 2 ;
and
SELECT XMLELEMENT("PRTCPNT_INFO",
XMLFOREST(PRTCPNT_ID,PRTCPNT_NAME,PRTCPNT_ADDRESS))
FROM T_PRTCPNT
WHERE PRTCPNT_ID = 2 ;
i need to CONCAT these two outputs and put in one xml column(XML_HIST) in another table (t_pur_hist).
SQL> desc t_pur_hist
Name Null? Type
HIST_ID NOT NULL NUMBER
HIST_DT DATE
XML_HIST XMLTYPE
PUR_ORDER_ID NUMBER
i am new to xml.
could anyone please help me.
thanks
rampa.

Be aware that XML needs a root (=starting) tag to be well formed.
<this><is><a><valid><xml_document>!</xml_document></valid></a></is></this>
<here><is><another><valid><xml_document>!</xml_document></valid></another></is></here>
Now we union both XMLs...
<this><is><a><valid><xml_document>!</xml_document></valid></a></is></this>
<here><is><another><valid><xml_document>!</xml_document></valid></another></is></here>
=> not valid!
<documenthistory>
   <this><is><a><valid><xml_document>!</xml_document></valid></a></is></this>
   <here><is><another><valid><xml_document>!</xml_document></valid></another></is></here>
</documenthistory>
Valid!AS for your select problem.
You can add both selects into one.
select xmlelement("Documenthistory",
                  (select xml1 from table1),
                  (select xml2 from table2)
from dual;Message was edited by:
Sven W.

Cursor QueryProblems while inserting data into an external db in OBPM 10GR3

Hi all,
I have to call the db and insert a number of records at the same time. About 500 records at a time.
Whenever I do it, I get the following error after 2 or 3 requests/instances:-
Caused by: The maximum number of opened cursors has been exceeded in the SQL statement cache.
Detail:The maximum number of opened cursors can be configured in the external resources SQL configuration.
Caused by: The maximum number of opened cursors has been exceeded in the SQL statement cache.
Detail:The maximum number of opened cursors can be configured in the external resources SQL configuration.
Now, my question is, if I increase the number of opened cursors, what is the impact on the engine performance, instance size and process performance?
Is there any deadlock that takes place?
Is it a good idea to increase the number of cursors?
How do we close the cursors after every db transaction to ensure performance and scalability?
I use the following Query:-
String sqlQuery = "INSERT INTO TEST_TABLE(TEST_IDS )VALUES('"+ testIdArg +"')";
*// set a timeout of 180 seconds on the DDA query*
*     DynamicSQL.queryTimeout = 100;*
*     implname = "test_schema";*
*     items = Fuego.Sql.DynamicSQL.executeUpdate(sentence : sqlQuery, implname : implname);*
*What do I change in this query to eliminate db cursor problems?
*I have to run the same query more than 500 times for each instance? And there can be multiple instances every 30 seconds...
I tried closing the cursors using Fuego.Sql.DynamicSQL.close(it : items);
But unfortunately, items is an integer not an Iterator.

Looks like your system may be under load, or you may be perfroming an insert that is taking longer than 45 - 60 seconds. The DB adapter runs as a synchronous process so if the insert takes longer than 60 seconds you will get timeouts,
There may be some tuning that needs to be performed. Can you please give me a little more background on the activity that is happen when it errors?
Are you able to post the full error stack.
cheers
James

Data services job failes while insert data into SQL server from Linux

SAP data services (data quality) server is running on LInux server and Windows. Data services jobs which uses the ODBC driver to connect to SQL server is failing after selecting few thousand records with following reason as per data services log on Linux server. We can run the same data services job from Windows server, the only difference here is it is using SQL server drivers provided by microsoft. So the possible errors provided below, out of which #1 and #4 may not be the reason of job failure. DBA checked on other errors and confirmed that transaction log size is unlimited and system has space.
Why the same job runs from Windows server and fails from Linux ? It is because the ODBC drivers from windows and Linux works in different way? OR there is conflict in the data services job with ODBC driver.
===== Error Log ===================
8/25/2009 11:51:51 AM Execution of <Regular Load Operations> for target <DQ_PARSE_INFO> failed. Possible causes: (1) Error in the SQL syntax;
(2)6902 3954215840 RUN-051005 8/25/2009 11:51:51 AM Database connection is broken; (3) Database related errors such as transaction log is full, etc.; (4) The user defined in the
6902 3954215840 RUN-051005 8/25/2009 11:51:51 AM datastore has insufficient privileges to execute the SQL. If the error is for preload or postload operation, or if it is for
===== Error Log ===================

this is another method
http://www.mssqltips.com/sqlservertip/2484/import-data-from-microsoft-access-to-sql-server/
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Problems while inserting data into Oracle10g RDF store

Similar Messages

Maybe you are looking for