Problems whith IDOC WPDREB01.

Hi everyone!!
I have standard IDOC WPDREB01, and i need to make extension for this IDOC. For extension i want use standard segment of this IDOC (E1WPREBXX), problem that I cannot find user exit, which fills this IDOC.
I put break-point in all of this user exit:
EXIT_SAPLWPAV_001
EXIT_SAPLWPAV_002
EXIT_SAPLWBBY_INTERFACE_014
EXIT_SAPLWPDA_001
EXIT_SAPLWPDA_002
EXIT_SAPLWPDA_003
EXIT_SAPLWPDA_004
EXIT_SAPLWPDA_005
EXIT_SAPLWPDA_006
EXIT_SAPLWPDA_007
EXIT_SAPLWPDA_008
EXIT_SAPLWPDA_009
EXIT_SAPLWPDA_010
EXIT_SAPLWPDA_011
EXIT_SAPLWPDA_012
EXIT_SAPLWPDA_013
EXIT_SAPLWPDA_015
EXIT_SAPLWPDA_016
EXIT_SAPLWPDA_017
EXIT_SAPLWPSA_001
EXIT_SAPLWPUE_001
EXIT_SAPLWPUE_002
EXIT_SAPLWPUE_050
EXIT_SAPLWPUE_100
EXIT_SAPLWPUE_101
EXIT_SAPLWPUE_102
EXIT_SAPLWPUE_103
EXIT_SAPLWPUE_104
EXIT_SAPLWPUE_105
EXIT_SAPLWPUE_106
EXIT_SAPLWPUE_109
EXIT_SAPLWPUE_110
EXIT_SAPLWPUE_111
EXIT_SAPLWPUE_112
EXIT_SAPLWPUE_113
EXIT_SAPLWPUE_119
EXIT_SAPLWPUE_120
EXIT_SAPLWPUE_121
EXIT_SAPLWPUE_122
EXIT_SAPLWPUE_123
EXIT_SAPLWPUE_129
EXIT_SAPLWPUE_130
EXIT_SAPLWPUE_131
EXIT_SAPLWPUE_132
EXIT_SAPLWPUE_139
EXIT_SAPLWPUE_140
EXIT_SAPLWPUE_141
EXIT_SAPLWPUE_142
EXIT_SAPLWPUE_149
EXIT_SAPLWPUE_152
EXIT_SAPLWPUE_159
but my break-point doesn't work.
If anyone knows user exit, or BADI which i need to use, please tell this name

Hi,
This might help u
/people/jiaxiang.huang/blog/2008/01/14/some-experience-on-idoc-enhancement
Regards
Seshagiri

Similar Messages

Hi please forword this massage I have a problem whith paid registration When i did check and bought 2 ringtones i paid her Yesterday but amount taken off my card and i do not know why If you have a subscrition to someting please delete ann just qhe

Hi please forword this massage
I have a problem whith paid registration
When i did check and bought 2 ringtones i paid her
Yesterday but amount taken off my card and i do not know why
If you have a subscrition to someting please delete ann just qhen i dicide to buy someting then i take maney
Sent from my iPhone

Please repost in your native language, as your present post makes no sense.

Problem in Idoc creation in ME22N

Hi All,
We are facing a problem in Idoc creation in transaction ME22N.Our requirement is to trigger an output type and create a idoc everytime a change is made to a particular Purchase Order.
Presently however,for some vendors,when we change the plant at the item level,an Idoc is not created(with a message that the changes are not relevant to create an Idoc).Any other change to the Purchase Order like changes in quantity or price,results in successful Idoc creation.
We have also noticed that this happens only in the case of certain vendors.The Customer Info records and vendor data are all believed to be fine.
Are any other config settings required to be maintained for this?
Thanks in advance!
Regards,
Nejuma Iqbal

Hi Nejuma,
I don't think there is any problem with cofiguration settings.u r getting the idocs for some vendors .
if iam not wrong u r giving LS in the tcode(we20).The method which u r using is change pointers.As u r using standard idoc all the settings will be done.
Only settings u have to do is
1>generate partner profiles(WE20)
2>Distribute model view(BD64).
REGARDS,
Nagaraj

HR Programming : Problem with IDOC HRMD_A

Hello ,
We use Idoc HRMD_A for transferring PA records from
one R3 system (ECC5) to another R3 system (46d).
We have a problem - The Idoc doesn't check the data
inserted against the database check tables and
inserts wrong values into the target system database.
(At least that what has happened when we transferred
wrong value of MASSN in 0000 records).
Is there something we can do ?
Maybe - Some flag we can sign in order a check against check tables will be done ?
Is it a problem with this IDOC ?
Thanks .
I appreciate any help.
Nitzan S.

Consultancy note 134085 :
"Ultimately you are responsible for consistency of this data. SAP saves this data directly on the database without checking the single fields and consistency of the data records (time constraints check, writing change pointers, value check) because the consistency for an R/3 - R/3 lingage is of course ensured."
The IDOCs were intended for R3->R3 data replication, and not for data loads/interfacing. Since you're having problems, I'm guessing in addition they require the same SAP version as well.

Problem with IDoc scenario - IDocs do not aarive to XI

Hi guys!
I have a problem with IDoc->XI->File scenario. Colleagues send IDocs from R/3 and they are not in the XI. In R/3 they look like if they were correctly sent, however, I can not see them in sxmb monitor. BUT, when they send them again explicitly from R/3 (t-code WE19), they arrive...
REALLY strange...
Any suggestions?
IDX2 metadata loaded.. I think, all needed settings are done.
Question - do I need to set up LS in XI ABAP part?
Thanx, Olian!
P.

Hi Olian ,
just check if u have followed all the following steps
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2) a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
In SLD System Landscape Directory
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
In Transaction SALE
Define and Assign the logical system name
Regards,
AshwinM

Problem sending IDOC DESADV /AFS/DELVRY03 to XI

Hi Gurus,
I have problems sending IDOCs DESADV (basic type /AFS/DELVRY03) created by function LSEND_IDOC to XI system. IDOC is correctly created by R3 system (AFS ECC 5.0) and correctly sent on the XI port (Status: Data passed to port OK - 03), but XI system doesn't receive IDOC.
If I resend the same IDOC by WE19 tcode goes ok!!
In R3 sending system nothing warnings/errors in syslog or sm58.
Any suggests? Thanks in advance.

Issue solved! It is necessary close the master idoc with a commit

Problem with idoc DEBMAS

Hi everybody.
We have a problem with idoc DEBMAS.
This idoc is sent from R3 to PI throw change pointers then the idoc is field only with the data modified in the master custumer.
We need the information fill it in the segment /IDOC/E1KNA1M/E1KNVVM to determine the receiver determination but this segment is not always sent.
What can be done in R3 to send always this segment.
We dont want to sent the whole data but always this segment.
Any idea???
Thanks a lot!!!!!

Hi,
As E1KNVVM segement is not mandatory, when you are triggering IDoc based on change poitner data might not populted in the E1KNVVM segment until some sales data is changed.
if you need that segement always just copy the Idoc type and make it mandaotry field.
otherwise yoy can populate some fields like STDVRS with the reruried constant and can use in your receiver determination.
Regards,
Suresh

Problem in Idoc type

Hi Experts,
I am facing one strange issue in idocs.
I am having a scenario where for particular LS i have assigned HRMD_A06 basic type and ZHRMD_A06 extension in partner profile.
and i am trying to implement badi HRALE00OUTBOUND_IDOC.
in this badi at runtime wrong message type is getting picked up at the runtime(checked in debugging). But at the end it displays proper basic type.
so for me it is getting difficult to write logic in this badi.
Please guide is there any particular setting apart from partner profile where we assign message type to LS.

Hi,
In problem in idoc type , that below link will helpful to you.
Try this link,
http://www.riyaz.net/blog/beginners-guide-to-ale-and-idocs-a-step-by-step-approach/technology/sap/18/
Regards,
Sekhar

Problem in IDOC generation

Hi Freinds,
I am facing some problem in IDOC creation . We have used MATMAS03 as basic type. And activated the chang poineter. But for some materials it is not generating IDOC.
When we saw table BDCPS with the change pointer number from BDCP it is showing some other Message type MATMASAD instead of MATMAS for the materials for wch IDOCS not sent. Can you please tell me where it is getting from this message type .

Hi,
      check with below mentioned tcodes.
      BD50 - This tcode for Activate Change Pointer for Msg Type.
      BD52 - Tcode for Activate change pointer per change.doc object or record.
    Goto BD52 -> enter the message type as 'matmas' and enter.so that u find the object type,table name and field name.
      The status of change pointer can easily be checked from   BDCPV table/view.

Problem whith Sales Quotation

Hello.
I have a problem whith the sales quotation form, because the form changes to update mode when i go the last register (the document number is over 992) in find mode or with the browser buttons. Do you know why is happening this ??
Thanks.
my SAP version is 2007

Hi,
Do you have any formatted searches on this form? These can force the form in to Update mode if you choose the option 'Refresh Regularly'.
Kind Regards,
Owen

I am not able to download the latest version of itunes and it always show me "there is a problem whith this windows installer package. A program required for this install to complete could not be run. Contact your support personnel package vendor"...\

i am not able to download the latest version of itunes because it show me this "There is a problem whith this windows installer package. A program required for this install to complete could not be run. Contact your support personnel package vendor" And so i cannot put new songs or videos in it...

Repair your Apple software Update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU in All programs, go to control panel/
XP- add n remove Programs/highlight ASU, CHANGE then REPAIR.
Vista or Win7 - Programs n features/highlight ASU and click REPAIR

Hi, i have a problem whith Iphone 4 whith the home boton! What can i do?

Hi, i have a problem whith Iphone 4 whith the home boton! What can i do?

As you do not state what the exact issue is... See here...
The Home button is slow to respond
If the Home button is slow to respond when exiting one application, try another application.
If the issue exists only in certain applications, try removing and reinstalling those applications. For further assistance in installing and troubleshooting applications see this article
If the issue continues, Try turning iPhone off and then on again. If the iPhone will not restart, try resetting it.
If the issue is still happening, try to restore the iPhone
Seek service is the issue is still occurring.

I have problem whith the bluetooh whit OS X Mavericks The IMAC don't recognize the bluetooh

I have problem whith the bluetooh whit OS X Mavericks The IMAC don't recognize the mouse

Hi Alejofer,
Thanks for visiting Apple Support Communities.
You may find the troubleshooting steps in this article helpful with troubleshooting bluetooth on your Mac:
Bluetooth Quick Assist
http://support.apple.com/kb/ht1153
Best,
Jeremy

FIle Content Conversion Problem in IDOC-XI-File Scenario

Dear All,
I am doing IDOC-XI-FILE scenario.
I am facing one problem related to File Content Coversion.My requirement was to generate a dynamic file like %store_code%_%current_date%_sitemaster.xml , I have completed the dynamic generation successfully .
Now there is slight change in the requirement ,we have to suppress the current_date node of the xml content . i have tried to suppress the current_date using these DATE.fieldFixedLengths 0 , Date.fixedLengthTooShortHandling Cut , But I am unable to suppress it Can some body provide me the details on this .
The output xml version generated by Reciever file adapter is as below :
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_SITE_MASTER xmlns:ns0="http://sample-xitest.com/sitemaster">
- <SITE_DATA>
<STORE_CODE>N002</STORE_CODE>
<TITLE_MEDI>Company</TITLE_MEDI>
<STORE_NAME>Mount Road</STORE_NAME>
<STREET>Chennai</STREET>
<COUNTRY>IN</COUNTRY>
<SALES_TAX_NO>12345678910</SALES_TAX_NO>
</SITE_DATA>
</ns0:MT_SITE_MASTER>
Plz provide me the code I have to write in the file content conversion .
Thanks in advance
Regards
Prabhat

If u see my earlier reply, I mentioned that u can not suppress the field from the one node.i.e Form SITE_DATA data type u can not suppress the field called CURRENT_DATE.
My suggestion is that , modify the Data type in such a way that you will be having two nodes as I have mentioned earlier. Then use the Suppress Logic for the Current Date.
So it will look like this-
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_SITE_MASTER xmlns:ns0="http://sample-xitest.com/sitemaster">
- <SITE_DATA>
<STORE_CODE>N002</STORE_CODE>
<TITLE_MEDI>Company</TITLE_MEDI>
<STORE_NAME>Mount Road</STORE_NAME>
<STREET>Chennai</STREET>
<COUNTRY>IN</COUNTRY>
<SALES_TAX_NO>12345678910</SALES_TAX_NO>
</SITE_DATA>
<CURR_DATE>
<CURRENT_DATE>20051105</CURRENT_DATE>
</CURR_DATE>
</ns0:MT_SITE_MASTER>
So ur SITE_DATA is not having a field called CURRENT_DATE. This field is in separate node (segment ) called CURR_DATE. Now u can use the Suppress Logic for the same like this.
CURR_DATE.fieldFixedLengths - 0
CURR_DATE.fixedLengthTooShortHanling - Cut
And in your Variable Substitution you can use the date from the other segment called CURR_DATE.
Hope this solves ur problem.
Regards,
Moorthy

Problem with IDoc for an outbound delivery

Dear All,
I am facing a problem with the IDoc defined for an outbound delivery.
Scenario:
Implementation of a small enhancement for an IDoc (DESADV, DELVRY01) created for an outbound delivery (in VL02N).
What I did:
I implemented the EXIT_SAPLV56K_002 exit in the V56K0001 enhancement, activated in SMOD, assigned V56K0001 component in CMOD and acivated it. Then I put a breakpoint on the ZXTRKU02 include. For me everything in SMOD and CMOD looks OK.
I have also created a partner profile, port, outbound message config. (message DESADV, basic type DELVRY01, application V2, output message type LAVA, process code DELV. function module used for this process code is IDOC_OUTPUT_DELVRY).
What I can do:
I can issue an IDoc message, it looks ok and contains the standard data.
Problem:
It seems that the enhancement does not work. Finally I put there only one line of code to avoid a program bug and just to check . The system does not stop at the breakpoint (set on the ZXTRKU02 include in the EXIT_SAPLV56K_002 exit).
Am I using the proper exit? I appreciate any suggestions.
Thanks,
Grzegorz Skorus

Hello Grzegorz
Not an expert on this, but noone is responding so I thought let me try and help you. You seem to be doing the right things as mentioned in OSS note 1498409.
Firstly since this can be called form Shipment Idoc also, you may need to make a differentiation by the interface parameter 'MESSAGE_TYPE' or segment name. See the attached OSS note, though it belongs to older releases, it may help you.
Also help says 'The callup of this function module is programmed for each enhancement of the internal table for the IDoc (in other words, when you add an extra segment'. So may be you need to add an extra segment/field to make it work.
Futher the user exits are replaced by BADIs. May be you should use exit_badi_v56k.
Hope this helps and others will pitch in.
1498409 - Valuation Type unavailable when creating deliveries using IDOC
631913 - Exit after formatting delivery IDoc type DELVRY

Problems whith IDOC WPDREB01.

Similar Messages

Maybe you are looking for