Problems with 2009 repeating events

The first time I opened ical this new year I found that many of my repeating events, such as Mother's Day, holidays and just plain events are appearing in incorrect months. The first thing I did was to check to see what the repeating dates were set for and they are all correct. For example Mothers day is set for the second Sunday in May but it is appearing on January 11 2009. The case is the same for many events. Do I have to manually fix them? Is this a bug that will reoccur next year. I have used ical for a number of years and this is the first time I have had such a problem. Any help will be appreciated.

I think I'm having a similar issue. I updated my class schedule this year until May, and now I'm getting all of my events duplicated except the duplicates are moved to later in the day. I've even deleted them and imported them. They are fine at first, then later they duplicate.

Similar Messages

I have problems with syncing my events folders från MacBookAir to Ipad2. Some pictures show and not others?

I have problems with syncing my events folders från MacBookAir to Ipad2. Some pictures show and not others?
Anyone else having this problem?

Try deleting the photo cache from your computer and then re-try the photo sync and see if they then copy over - the location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314

Problem when sync repeat events with ical

Hi all,
I've a strange problem that happen when I sync repeated events on my mac versus iphone...
With iCal I can see correctly an events repeated for example for two days... (using the option repeat every day with an end date). After syncing, on imac it will be correct but on iphone (3.1.2) the same event are repeated with one more day added, three instead of two:(
Any idea about that?
Kind regards,
Stefano

Hi guys, any idea?
Rgds
stefano

Can I switch calendars (Ex. "night shift" to "day shift" cal) with a repeating event, but ONLY for that one event?? It asks "for all events or only this event" if i change the time. But it changes ALL events when i try and switch calendars. Any help??

I have 2 calendars set up for my work schedule, a "night shift" and "day shift" calendar. I've set up repeating events fro Fri/Sat/Sun 3-11pm "night shifts" and Mon/Tues 7am-3pm "day shifts". But lets say for example that I swap shifts and instead of working nights on Saturday like I normally would, I am now working days. I want to change that in my calendar. When I go to change the event, if i change the TIME it asks if i want to change all event or ONLY this event. no problem....just this single event. but when i go to change the event from the "night shift" calendar to the "day shift" calendar, it changes ALL the repeating events, and not just that one single event. can anyone help with this??? am i doing something wrong? is there a way to do this or not with the new iCal program??? i used to do this and never had any problems. Thank you!

You need to follow iPhoto terms since we only know what you tell us
what are you calling folders - in iPhoto folders can not hold photos - albums hold photos and folders hold albums or other folders
The basic default view of photo is by event (iPhoto '08 and later)
Exactly what you you trying to do?
LN

Problem with releater and event handling

Hi Flex genius,
I have been struggling for the whole day with a problem connected to repeater.
I have a text field:
<mx:Text id="shortText" width="300" text="{newTeaser.currentItem.shortDescription}" styleName="Scandinavian" fontSize="12" />
and a label:
<mx:Label   id="readMoreLabel" x="13" text="{newTeaser.currentItem.readMore}" color="#3C4593" />
both inside a Repeater which fetches from an XML:
<mx:Repeater id="newTeaser" dataProvider="{eventsData}">
The Repeater works fine, but I need to add a click on the label id="readMoreLabel" that replace the shortText.text with {newTeaser.currentItem.longDescription} instead of {newTeaser.currentItem.shortDescription}.
i am quite new in Flex, so I guess I miss some fundamentals.
Thanks for your help.
Max

This code works, and notice the trace(), you CAN have IDs for the controls in the repeater, and you can access them as an array, though I do not make use of this capability in my solution.
If this post answers your question or helps, please mark it as such.
Greg Lafrance - Flex 2 and 3 ACE certified
www.ChikaraDev.com
Flex / AIR Development, Training, and Support Services
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
creationComplete="dataService.send();">
<mx:Script>
    <![CDATA[
      import mx.rpc.events.ResultEvent;
      import mx.collections.XMLListCollection;
      import mx.controls.Text;
      [Bindable] private var eventsData:XMLListCollection;
      private function dataHandler(evt:ResultEvent):void{
        eventsData = new XMLListCollection(evt.result..item as XMLList);
      private function clickHandler(evt:MouseEvent):void{
        var txt:Text = VBox(evt.currentTarget.parent).getChildAt(0) as Text;
        for each(var xml:XML in eventsData){
          if(xml.shortDescription == txt.text){
            txt.text = xml.longDescription;
        for each(var obj1:Text in shortText){
          trace("shortText: " + obj1.text);
    ]]>
</mx:Script>
<mx:HTTPService id="dataService" url="data.xml" resultFormat="e4x" result="dataHandler(event);"/>
<mx:Repeater id="newTeaser" dataProvider="{eventsData}">
    <mx:VBox width="100%">
      <mx:Text id="shortText" width="100%" text="{newTeaser.currentItem.shortDescription}"/>
      <mx:Label id="readMoreLabel" text="{newTeaser.currentItem.readMore}" color="#3C4593"
        click="clickHandler(event);"/>
    </mx:VBox>
</mx:Repeater>
</mx:Application>
<?xml version="1.0" encoding="utf-8"?>
<teasers>
<item>
    <shortDescription>This is short desc one.</shortDescription>
    <readMore>Read More One</readMore>
    <longDescription>This is long desc one.</longDescription>
</item>
<item>
    <shortDescription>This is short desc two.</shortDescription>
    <readMore>Read More two</readMore>
    <longDescription>This is long desc two.</longDescription>
</item>
<item>
    <shortDescription>This is short desc three.</shortDescription>
    <readMore>Read More three</readMore>
    <longDescription>This is long desc three.</longDescription>
</item>
</teasers>

Problem with checkbox and Event.stop(event)

Hello,
I cannot change the checkbox in a row, if the Event.stop(event) is fired on checkbox. My aim is, that the event OnRowClick is stoped, if I change the checkbox in the row.
<rich:extendedDataTable id="requestTable" value="#{requestListHandler.normalisedRawRequestList}" var="req"
                         rows="#{requestListHandler.limitRows}" selectionMode="single">
                         <a4j:support event="onRowClick" action="#{requestListHandler.viewRequest}">
                              <f:setPropertyActionListener value="#{req}"
                                   target="#{requestHandler.selectedRequest}" />
                              </a4j:support>
                        <rich:column>
                                   <h:outputText value="#{req.offerListSize}">
                                        <f:convertNumber type="number" />
                                   </h:outputText>
                     </rich:column>
                         <rich:column id="checkBoxColumns">
                                   <h:selectBooleanCheckbox onclick="Event.stop(event);"
                                        value="#{req.firstInterpreterTimeChecked}"/>
                     </rich:column>
</rich:extendedDataTable>I know I am using richfaces, but I have problem with sun-ri component <h:selectBooleanCheckbox..../>.
Have you any idea?
Manu
Edited by: Argonist on Jun 16, 2009 8:27 AM
Edited by: Argonist on Jun 16, 2009 12:25 PM

I had the same problem. I read you post and was so disappointed that no one had answered you. But I have a good news for you :) My team leader managed to solve this awkward problem.Add to h:selectBooleanCheckbox style="z-index: 20;" so that it is "above" the table row that fires its own onclick event.

Hi everyone. I have just started having problems with iCal. Events that I thought I had deleted are appearing on Print Preview and on print outs. Likewise Events which I have not deleted have disappeared from my calenders, but appear in print preview.

Hi everybody. I have recently started having problems with iCal (Version 2.05 (1069). Events that I thought I had deleted appear in Print Preview and Print Outs. Likewise Events that I have not deleted have disappeared from my calender (Month View) but appear in Print Preview and Print Outs. I see that there have been similar problems with Events disappearing especially in Month View. I wondered how print preview seemrd to be picking everything up deleted or not, and what the solution may be?. First time of Posting. I hope I haven't embarassed myself.

Hmmmm.
At the very least there must be a "com.apple.ical.plist"...iCal would not function without it.
Click on the Finder icon in the dock
Click on Go > Home
Double-click Library
Double-click Preferences
Look for a file called "com.apple.ical.plist" and remove it to the trash.

Problem with MOUSE OUT event in complex MCs

Hi,
I've got a problem with detecting mouse out event (AC3)
appearing when MC
contains other embeded MCs. The Event.MOUSE_OUT seems to be
unusefull
because every MC attached to parent triggers this event. I
can't turn off
mouse listening for these objects because they are a kind of
buttons
(thumbnails in picture gallery). So MOUSE_OUT event is
triggered even when
we are still inside parent MC. More over - MC has irregular
shape which
makes impossible to check mouse position and compare it 'by
hand' with
object with not rectangular boundary. Does anybody know how
to solve this
issue ?
Regards,
Marek

> yes this is expected behaviour with MOUSE_OUT, which is
why there is
> another
> event ROLL_OUT, which as Flash help says, "...is to
simplify the coding of
> rollover behaviors for display object containers with
children."
Thanks a lot Craig !
Now it works fine.

Problem with linksys repeater

I am using a linksysWR54 G wireless router. I recently purchased a linksys repeater to extend a signal throughout my house. I cannot get the repeater to work. I press the reset button and then the button for automatic configuration. But it does not seem to recognize the wireless router. However when I take it to my neighbor's house, who has a similar model wireless router, and push reset, then automatic configuration at his house it functions perfectly. Is this a software problem? I hate to sound stupid, but because I using a Macintosh, I'm not even sure how to download the latest software or what is available. Currently I am using
version 3.03.6 thanks

Although I am having a similiar problem with the wre54g extender and mac laptops I can tell you that the easiest way to configure the extender if it is a Version 2 wre54g is to run an ethernet cable from the router to to the port on the front of the extender (small tab can be lifted). After that open your browser and type 192.168.1.240 and enter, user name is blank and password is admin. From there configure it exactly as your router is configured. It could be that your router is encrypted etc...
If it is a version 1 you will have to reset the extender (paperclip for 15 seconds on side) then plug into a socket and look for it on the list of available networks (linksys r.....). connect to it using a static IP of 192.168.1.5 and a gateway of 255.255.255.0 - check with linksys to verify. Once connected open safari and type 192.168.1.240 and follow above.
Make sure to change the ip address to something like 241 or maybe a static within the range of the routers addressing scheme. I think this is the problem I am having... The mac is not picking up the extenders ip. I am waiting to hear back from tech support to verify.
Hope this helps
SiO2y

Problem with Booleans and events

I have an event structure inside a while loop. I have several buttons each of which triggers one event. Now no matter what latch action I try with these at any point of time only one of the events run. So if I want to run another event I have to stop the main vi run it again and then go to the next event. I guess what this means is that the events are not being terminated by value change. But I have tried to reset the value of the boolean as well in order to terminate but event this doesnt seem to work.There is some fundamental problem somewhere but I am unable to figure it out. Can somebody please help me.
I am attaching a sample vi and sub vis that demonstrate this problem. In this case I need to have the booleans h
ave the switch when released action. i.e as long as the button is pressed the camera i control moves left and as soon as I release it it shud stop.
Attachments:
CamInte.vi ‏108 KB
Left.vi ‏190 KB
Right.vi ‏190 KB

You need to decide whether you want things controlled by events, or by loop polling.
Some things to consider:
Inside each event you have a loop where you read the booleans the events react to. That means the events will be fired over and over again inside the loop, and you'll have a stack of old events to be fired when the while loop has exited...events you don't really want to do anything about (use events for all the button clicks, or loops - not a mix).
Events are still flow controlled so when the left event fires and it enters the while loop it won't handle any other events until that while loop has finished.
When an event fires the button value if read at the same time is not the value the event fired on. So when you have an event that fires when
you press the button, if you wire the button value to something inside that even it won't be true, it will be false. Use the new value output of the event case to read the value you really want.
MTO

Problem with time in Events

Hi All,
I need help desperately. I have followed several suggestions from previous posts but none helped. I just re-installed ical and applied the entire 10.5.2. update and I still have the same problem.
When I create an event, the time always shows 15:54P.M. and regardless of what I have tried I can not change it! I have checked date/time settings as well. Nothing I can see that would make a difference.
I have also removed the cached files etc and moved the file to the desktop restarted iCal and I still have the same problem.
Any other suggestions will be greatly appreciated.

Here`s the screenshot.
But anyway:
The drive is Makintosh HD from my Macbook and it is shown in the event mediathek and in the projects. Since I`ve recognized this problem I installed FCPX again and consequently the event and project directory created by FCPX is where it should be and it shows all the test events including it`s files.
So what happens? Opening FCPX you see only one event and that a new empty event. All previous events are not shown there even if you can see them in the finder. So if you import again the clips they are in this new event library. After closing correctly FCPX and reopening there again is nothing than an new and empty event. What it does is that it recognized that i.e. there are events with previous numbers and so it creates an new one with the next available counting number.
If you want to open one event from the finder it by clicking to the file it opens FCPX but it says it cannot open the clicked file.

Problems with page and event paramters in java portlets

Hi there!
Following the documentation in "A primer on Portlet Parameters and events" and "Adding Parameters an Events to Portlets" I tried to develop two portlets (who will be at the same page), one showing some content of a repository (with possibilities to browse throw it) and another showing a sitemap of the repositories whole content, presenting links to the content's pages to be shown in the content portlet.
So I added:
1. a page parameter called pageMenuID to identify the current content page to be shown in the content portlet
2. an input parameter for content portlet called portletMenuID. This input parameter is mapped to the page parameter pageMenuID
3. an event for content portlet called changeContent with output parameter contentMenuID. When this event rises, "go to page" is set to the current page and the output parameter contentMenuID is mapped to the page parameter pageMenuID.
4. an event for sitemap portlet called changeContentFromSitemap with output parameter sitemapMenuID. When this event rises, "go to page" is set to the current page and the output parameter sitemapMenuID is mapped to the page parameter pageMenuID.
This is the code for some constants and a function to build the links in the content portlet, that I want to use:
// page parameter (shouldn't be used here)
private final static String pageParamMenuID = "pageMenuID";
// parameter names as given in providers.xml:
// portlet input parameter
private final static String inputParamMenuID = "portletMenuID";
// event name
private final static String eventName = EventUtils.eventName("changeContent");
// parameter name for event parameters
private final static String eventParamMenuID = EventUtils.eventParameter("contentMenuID");
String getEventUrl( PortletRenderRequest portletRequest, long menuID) {
NameValuePair[] eventParams = new NameValuePair[2];
eventParams[0] = new NameValuePair(eventName,"");
eventParams[1] = new NameValuePair(eventParamMenuID, "" + menuID);
try {
return PortletRendererUtil.constructLink(portletRequest, portletRequest.getRenderContext().getEventURL(),
eventParams,
true,
true);
} catch (Exception e) {
return "null";
This is the analog code from the sitemap portlet:
// page parameter defined on "edit page mode" (shouldn't be used here)
private final static String pageParamMenuID = "pageMenuID";
// parameter names as given in providers.xml:
// event name
private final static String eventName = EventUtils.eventName("changeContentFromSitemap");
// parameter name for event parameters
private final static String eventParamMenuID = EventUtils.eventParameter("sitemapMenuID");
String getEventUrl( PortletRenderRequest portletRequest, long menuID) {
NameValuePair[] eventParams = new NameValuePair[2];
eventParams[0] = new NameValuePair(eventName,"");
eventParams[1] = new NameValuePair(eventParamMenuID, "" + menuID);
try {
return PortletRendererUtil.constructLink(portletRequest, portletRequest.getRenderContext().getEventURL(),
eventParams,
true,
true);
} catch (Exception e) {
return "null";
But what actually happens is nothing. I also tried to construct the links with EventUtil.constructEventLink() with the same result. Checking the produced html-code in the browser shows that the same URLs are produced. So I'm of the opinion, that proper event links are created.
After checking the sent and received request parameters I came to the conclusion, that the event output parameters are never mapped to the page input paramters, as they should. So I changed the code to the following:
// page parameter (shouldn't be used here)
private final static String pageParamMenuID = "pageMenuID";
// parameter names as given in providers.xml:
// event name
private final static String eventName = EventUtils.eventName("changeContentFromSitemap");
// parameter name for event parameters
private final static String eventParamMenuID = EventUtils.eventParameter("sitemapMenuID");
String getEventUrl( PortletRenderRequest portletRequest, long menuID) {
NameValuePair[] eventParams = new NameValuePair[1];
eventParams[1] = new NameValuePair(pageParamMenuID, "" + menuID); <-- Note that the page parameter and not the event output parameter is used here -->
try {
return PortletRendererUtil.constructLink(portletRequest, portletRequest.getRenderContext().getEventURL(),
eventParams,
true,
true);
} catch (Exception e) {
return "null";
Now everything works fine, including addition of persistent private portlet parameters and further input/page/event parameters as well as working with a third portlet with performs a search (and presents the search results as links which change the content in content portlet).
But this is actually NOT the way it should work: The names of the page parameters are hard-coded in the portlets, so the roles of page designer and portlet developer are not separated in the way it is presented in the documentation. I coulnd't find a way to map the event output parameters to the page parameters to work this out.
Now I wonder whether there's some known bug in PDK or perhaps a mistake in the documentation or wether I'm just missing doing the right things. I've already read some postings in this forum concerning this problem (for example how to change the query??? but I think I've done all the things that are suggested there (checked the entries in provider.xml and the proper mapping of page parameters, public (input) portlet parameters and event output parameters, also the way I read the received request parameters and build the links)
Has anybody an idea what's wrong here?
Best regards
Torsten

Hi Amjad,
thank you very much for time and effort you spent on helping me solving this problem.
Unfortunately, I think I already tried what you suggest in your answer, but without success. From my experience, the following two calls:
1.
<%!
private static String eventName = "changeContent"
private static String eventParamID = "menuID"
String getEventUrl(PortalRenderRequest prr, long menuID) {
NameValuePair[] eventParams = new NameValuePair[1];
// no addition of eventName in the array
eventParams[0] = new NameValuePair(eventParamID, "" + menuID);
return EventUtils.constructEventLink(prr, eventName, eventParams, true, true);
%>
<a href="<%= getEventUrl(portletRequest, 1234) %>">some link for ID 1234</a>
2.
<%!
private static String eventName = EventUtils.eventName("changeContent");
private static String eventParamID = EventUtils.eventParameter("menuID");
String getEventUrl(PortalRenderRequest prr, long menuID) {
NameValuePair[] eventParams = new NameValuePair[2];
eventParams[0] = new NameValuePair(eventParamID, "" + menuID);
eventParams[0] = new NameValuePair(eventName,"");
return PortletRendererUtil.constructLink(prr, prr.getRenderContext().getEventURL(), eventParams, true, true);
%>
<a href="<%= getEventUrl(portletRequest, 1234) %>">some link for ID 1234</a>
produce identical links. I took the second way because it is easer to add private portlet parameters to the link: just as additional NameValuePairs in the eventParam- Array (name constructed with HttpPortletRendererUtil.portletParameter()), instead of constructing the link "by hand" as mentioned in the javadoc for constructEventLink(). I have to add these private portlet parameters here because when an event from a private parameters owning portlet is fired, the private parameters are lost (in difference to when an event from ANOTHER portlet is sent).
So I think, when you also look closely to the code snippet I added in the first posting, I made shure that I added the name of the event and not just the event parameters to the link.
I hope that I understood your answer right. Perhaps you have another idea what might be wrong. Thank you again,
best regards
Torsten

Problem with Spry:Repeat and Slide Effect on IE6

I run the website for my kids' hockey association and I'm not
a web programmer. I am trying to display events in a Spry region
using spry:repeat. The data is coming from a Google Calendar . I
display the event date and title on the main page. I have the
onclick set to call a javascript function that exposes the details
using the spry slide effect. It works ok except in IE6.
The following creates my dataset from a method call to a
Coldfusion component that returns the XML I need:
<script type="text/javascript">
var ds1 = new Spry.Data.XMLDataSet("
http://tornadoyouthhockey.org/Events.cfc?method=EventXML",
"events/event",{distinctOnLoad:false});
</script>
The following function slides open the detail:
<script type="text/javascript">
function startBlind(rid) {
var contentdiv = document.getElementById('panel'+ rid
+'Content');
var panel_height = contentdiv.clientHeight;
if (panel_height<100){
var bd = new Spry.Effect.Blind('panel'+ rid +'Content',
{duration: 800, to: '100px', toggle: true});
else {
var bd = new Spry.Effect.Blind('panel'+ rid +'Content',
{duration: 800, to: '0px', toggle: true});
bd.start();
</script>
Within the repeat I have:
<div class="EventPanelLabel"
onclick="startBlind({ds_RowID});">{startDate} —
{title}</div>
I think the XML looks OK but for some reason when the page
loads, IE6 returns:
Exception caught while loading
http://tornadoyouthhockey.org/Events.cfc?method=EventXML:
[object Error]
The page seems to work fine in Safari and Firefox on the Mac
and IE7 as well as Firefox on Windows. Just IE6 seems to be having
the problem. Could you please take a look at
http://tornadoyouthhockey.org
and provide any suggestions you may have?
Also, is there a way to hide the {startDate} - {title} I'm
seeing while the page loads?
Thanks,
Kevin

Kin:
Thanks for your reply. I made the changes you suggested but,
unfortunately, IE6 is still giving me the same error when the page
loads:
Exception caught while loading
http://tornadoyouthhockey.org/Events.cfc?method=EventXML:
[object Error]
Could this be part of the problem an need to be changed as
well? :
<div id="panel{ds_RowID}Content"
Any other ideas? The page is live if you'd care to look...
http://tornadoyouthhockey.org
Kevin

Problem with 2009.02 torrents and firefox (firefox bug ?)

when i download any torrent files for 2009.02 with firefox (simply cliking on the link of the torrent), i end up with an empty file with 400 permission. (in /tmp)
i need to use "download link target here" to get a valid torrent file. (i even have to do it twice ??)
so i guess it's a bug in firefox ?
or something is wrong on the ftp site of archlinux ? why the torrent are not provided via http ?

Wow, that's weird. I just tried it and the links really don't seem to be working. It's not a Firefox bug, though. I'm sure because I downloaded the i686 Core ISO earlier today without a problem. Is the server the .torrents are hosted on down or something?
By the way, I have an unrelated question about seeding: I have no need for anything other than the i686 Core ISO, but should I download the other files just to seed? I have a really good upload speed, and I'd like to give back to the community any way I can.
Last edited by Killa B (2009-03-06 03:05:27)

Problem with wait for event

Hi everyone,
I'm using wait for event step in my workflow of a custom event called zevent2.
I'm not using the event as a start event of the workflow.The event is getting triggered at a certain point of the workflow programmatically.
So for that what should be the entry in SWE2? I've maintained the following entry for zevent2 at swe2 tcode.
Object type: BUS2000126
Event: ZEVENT2
Receiver type:
Receiver function module: SWW_WI_CREATE_VIA_EVENT_IBF
In swel I'm finding out that event got triggerd but it is giving error "No Receiver Entered".
And the workflow is getting stuck at 'wait for step event'.
So can anybody please tell me what is the step am I missing? is the swe2 correct?
Thanks & Regards,
Anirban

HI....
you have to specify RECIEVER TYPE without which you will be getting this error
goto SWE2 and give the value and your problem will be done
regards
Edited by: Mohit Kumar on Feb 20, 2009 10:50 AM

Problems with 2009 repeating events

Similar Messages

Maybe you are looking for