Problems with ant auto-loading the base Oracle Weblogic Libraries
I'm trying to perform an ant build of a Portal Project, and I get errors trying to compile the files from classes that are part of the Oracle WebLogic Portal Server and WebLogic System Libraries. I've tried adding the two list of jars as pathelements in an ant classpath object, but the javac isn't picking up the jars properly. I feel like there should be a script or be able to call a preconfigured version of ant for this.
I'm using an external version of ant, but using the jdk160_05 from WebLogic.
In the javac I get initial errors of things like:
[javac] /vobs/.../Portal/src/Controller.java:1: package javax.servlet.http does not exist
[javac] import javax.servlet.http.HttpSession;
[javac] ^
[javac] /vobs/.../Portal/src/Controller.java:2: package org.apache.beehive.netui.pageflow does not exist
[javac] import org.apache.beehive.netui.pageflow.PageFlowController;
not very likely. run ant with the verbose and debug flags and see what gets printed out for classpath etc (these classes are in server/lib/api.jar i think) , no special characters in your paths right?
Similar Messages
-
Problem with LILO to loading the OS
Hello everyone.
We have a problem with LILO to loading the OS in a CS-MARS 110R, find attached a screenshot.
The only solution is recovery the MARS Operating System.
Thanks in advance.
Regards
AntonioHi Matthew.
The re-image was impossible because this CS-MARS didn´t read the DVD correctly (hardware error) and we asked to Cisco a RMA.
Thanks
Antonio -
I still am having problems with Aperture not loading, It just refuses to work, and I get the message saying it has encountered a problem, and I may need to re-install which I have done dozens of times. The fix mentioned on an earlier post doesn't work as it is for Ver 10.6.6 and I am running 10.6.7
Do you have Final Cut installed on your machine?
If so, you may want to look at this article: http://support.apple.com/kb/TS3528
Let us know if that helps. -
Problems with WAS 6.40 Installation on Oracle - Phase 11 of 34
Hello,
<b>Problems with WAS 6.40 Installation on Oracle (Phase 11 of 34)</b>
with the installation of the Web Application server 6,40 SR1 on a Oracle server I get in phase 11 of 34 (Create Oracle Database) the following error-message:
CJS-00084 - SQL statement or script failed. Diagnosis: Error message: ORA-12547: TNS:lost contact.
error while loading shared library: libodm9.so : cannot open shared object file: No such file or dirctory.
Best Reagrds,
Ralf Steffenshi Ralf
i've found one composite note for Oracle <a href="https://websmp203.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700001366932002">505630</a>
hope this solves...
<i><b>Symptom</b>
ORA-12547: TNS:lost contact
Brbackup, brarchive, brrestore or brconnect may terminate with errors similar to the following:
BR301E SQL error -12547 at location BrDbConnect-1
BR301E SQL error -12547 at location dbf_info_get-1
Sapdba returns the following error, for example:
SAPDBA: ORACLE error -12547 occurred while checking instance status!
The R/3 work processes or R3trans return the following error at Connect:
C *** ERROR => CONNECT failed with sql error '12547'
<b>Other terms</b>
TNS-12547, TNS-00517
<b>Reason and Prerequisites</b>
As part of the Net8 Connect, a program such as the R/3 kernel, R3trans, svrmgrl, sqlplus or ODMA establishes a connection to the Oracle database. If the connection terminates due to problems at the server end, it can result in ORA-12547.
Additional information for the error is often available in sqlnet.log. In many cases, other messages that are not reported by all tools precede ORA-12547. If ORA-12547 occurs when the ODMA accesses the old Oracle-Home during a database upgrade, for example, it may make sense to temporarily restart ORACLE_HOME on the old Oracle-Home for test purposes and then to execute sqlplus or svrmgrl.
Even if sapdba or the BR tools terminate with an ORA-12547 when calling sqlplus or svrmgrl recursively, you should, for test purposes, call sqlplus or svrmgrl manually with the operating system user that was used.
Hopefully, a more informative error message will appear in addition to ORA-12547, for example:
ld.so.1: oracleC11: fatal: relocation error: file
/oracle/C11/817_64/libx8.so: symbol ksunsga_:
referenced symbol not found
If you find accompanying error messages of this type, start a note search with the corresponding search terms since we are often aware of the problem and a solution may already be available. If you do not find any significant error messages or a suitable note, check the following possible causes for ORA-12547:
1. UNIX: Incorrectly linked Oracle tools
2. UNIX: Problems with XPG4 compliance and s-bit
3. Too many requests to the listener at the same time
4. HP-UX, Oracle 8.1: Missing OS patch
5. Use of CRYPTO parameters in sqlnet.ora
6. AIX: I/O Async is deactivated
7. Resource problems
8. The CONNECT_TIMEOUT_LISTENER parameter in listener.ora is too low
9. Activated Oracle trace
10. UNIX: Incorrect oracle executable authorization
11. SOLARIS: LD_LIBRARY_PATH set when you call ODMA
12. AIX: Problem with post/wait kernel enhancement
13. UNIX: Problems with the libobk library
14. SOLARIS: Incorrect search sequence in the path variable
15. UNIX: Conflicts between 32-bit and 64-bit files
<b>Solution</b>
1. Relink the Oracle software as ora<sid> with
cd $ORACLE_HOME/rdbms/lib
make -f ins_rdbms.mk install
or
relink all
1. See Note 88884.
2. If individual work processes terminate with ORA-12547 when you start an R/3 instance, See Note 131561.
3. See Note 399610.
4. You can set security parameters that begin with SQLNET.CRYPTO_ in sqlnet.ora as part of the Advanced Security Option. Oracle releases < 8.1.7 cannot process these parameters correctly and result in ORA-12547. In this case, delete these types of parameters from sqlnet.ora.
5. If I/O is deactivated on AIX Async, the Net8 Connect fails with ORA-12547. In this case, activate I/O Async by using smitty.
6. Insufficient resources such as available memory on the database server can cause ORA-12547. For more information, see 384839.
7. In individual cases, it may make sense to increase the CONNECT_TIMEOUT_LISTENER parameter in listener.ora (for example, by 5 seconds, so from 10 to 15). Although a value of 10 seconds should usually be sufficient to establish a connection.
8. Delete the log files written by the Oracle trace in accordance with Note 92537.
9. Check to see whether the executable in $ORACLE_HOME/bin has the "rwsr-s--x" authorizations and the ora<sid> owner and correct this if necessary.
10. If you call ODMA on SOLARIS as part of a database upgrade and if LD_LIBRARY_PATH is set explicitly (on the lib directory of the target release), calling the old Oracle software through ODMA may fail with ORA-12547. If you use the old ORACLE_HOME to list sqlplus or svrmgrl, you get the following error:
ld.so.1: oracle<sid>: fatal: relocation error:
file /oracle/<sid>/817_64/libx8.so: symbol ksunsga_:
referenced symbol not found
ORA-12547: TNS:lost contact
In this case, permanently delete LD_LIBRARY_PATH from the environment. This does not have any negative effects since the libraries are automatically found in the correct directories as of Oracle 8.1.
If problems occur with the post/wait extension on AIX, the following type of errors will be displayed:
exec(): 0509-036 Cannot load program oracleC11 because of the
following errors:
0509-130 Symbol resolution failed for oracle because:
0509-136 Symbol pw_post (number 2524) is not exported
from dependent module /unix.
0509-136 Symbol pw_wait (number 2525) is not exported
from dependent module /unix.
0509-136 Symbol pw_config (number 2526) is not exported
from dependent module /unix.
0509-192 Examine .loader section symbols with the
'dump -Tv' command.
ORA-12547: TNS:lost contact
1. If the libobk library was created incorrectly, the following type of errors may occur:
/oracle/C11/817_64/bin/oracle: /sbin/loader:
Fatal Error: Cannot map library libobk.so
/usr/lib/pa20_64/dld.sl: Unable to find library
'/oracle/C11/lib64/libobk.sl
exec(): 0509-036 Cannot load program oracleC11 because of the
following errors:
0509-150 Dependent module /oracle/C11/817_64/lib/libobk.a(shr.o)
could not be loaded.
0509-152 Member shr.o is not found in archive
ORA-12547: TNS:lost contact
Check to see whether libobk exists and, if it is a link, that it points to a valid object. Note 142635 contains more information about this. The libobk link may point to this if a libsbtsh8.* file exists in the Oracle library directory. If you are using a third-party Backint tool, contact the relevant supplier, since libobk often has to point to a backint-specific library.
1. If an error such as
ld.so.1: ./svrmgrl: fatal: libucb.so.1: open failed:
No such file or directory
ORA-12547: TNS:lost contact
occurs, the PATH has probably been set incorrectly. For more information, see Note 44361.
1. If an error such as
ld.so.1: oracle<sid>: fatal: <library> wrong ELF class: ELFCLASS64
ORA-12547: TNS:lost contact
concerning "wrong ELF class" occurs, check whether the <library> mistakenly has a different bit size than the tool that was called. You can determine this using
file <library>
file <tool>
All the files involved must uniformly be either 32-bit or 64-bit.
</i>
Regards
Arunkumar -
Problem with module lazy loading in flex 3
Hi every body!
I have some problems with Module lazy loading. I am using flex 3.5, Module-flex3-0.14, parsley 3.2.
I can't get the LazyModuleLoadPolicy working correctly.
In my main application (the one that loads the modules), my parsley context is the following:
<cairngorm:LazyModuleLoadPolicy objectId="lazyLoadPolicy" type="{ OpenViewMessage }" />
<cairngorm:ModuleMessageInterceptor type="{ OpenViewMessage }"/>
<cairngorm:ParsleyModuleDescriptor objectId="test"
url="TestModule.swf"
applicationDomain="{ClassInfo.currentDomain}"
/>
And to load my module:
[Inject(id="test")]
[Bindable] public var test:IModuleManager;
<core:LazyModulePod
id="moduleLoader"
moduleManager="{test}"
moduleId="testModule"
/>
with LazyModulePod.mxml:
<mx:Canvas
xmlns:mx="http://www.adobe.com/2006/mxml"
xmlns:module="com.adobe.cairngorm.module.*"
xmlns:parsley="http://www.spicefactory.org/parsley">
<mx:Script>
<![CDATA[
import com.adobe.cairngorm.module.ILoadPolicy;
import com.adobe.cairngorm.module.IModuleManager;
[Bindable]
public var moduleId:String;
[Bindable]
public var moduleManager:IModuleManager;
[Bindable]
[Inject(id="lazyLoadPolicy")]
public var lazyLoadPolicy:ILoadPolicy;
]]>
</mx:Script>
<parsley:Configure/>
<module:ViewLoader id="moduleLoader"
moduleId="{ moduleId }"
moduleManager="{ moduleManager }"
loadPolicy="{lazyLoadPolicy}">
<!--<module:loadPolicy>
<module:BasicLoadPolicy/>
</module:loadPolicy>-->
</module:ViewLoader>
</mx:Canvas>
OpenViewMessage.as in a swc:
public class OpenViewMessage
private var _moduleId:String;
private var _viewId:String;
public function OpenViewMessage(moduleId:String, viewId:String)
this._moduleId = moduleId;
this._viewId = viewId;
public function get viewId():String{
return _viewId;
[ModuleId]
public function get moduleId():String
return _moduleId;
In another flex project, my module context is:
<mx:Object
xmlns:mx="http://www.adobe.com/2006/mxml"
xmlns:controler="com.cegedim.myit.controler.*">
<controler:WindowControler/>
</mx:Object>
The module implements IParsleyModule
<mx:Module xmlns:mx="http://www.adobe.com/2006/mxml" layout="vertical"
implements="com.adobe.cairngorm.module.IParsleyModule"
xmlns:spicefactory="http://www.spicefactory.org/parsley">
<mx:Script>
<![CDATA[
import org.spicefactory.parsley.flex.FlexContextBuilder;
import com.adobe.cairngorm.module.IParsleyModule;
public function get contextBuilder():ContextBuilderTag
return contextBuilderTag;
]]>
</mx:Script>
<spicefactory:ContextBuilder id="contextBuilderTag" config="{ MyITTestModuleContext }"/>
<spicefactory:Configure/>
</mx:Module>
and the WindowControler:
public class WindowControler
public function WindowControler(){}
[Init]
public function initialize():void
Alert.show("Module Initialized");
[MessageHandler(scope="local")]
public function openViewMessageHandler(message:OpenViewMessage):void
Alert.show("Opening view " + message.viewId + " in the module " + message.moduleId);
If i uncomment the basicLoadPolicy in LazyModulePod.mxml and remove the lazyModuleLoadPolicy, everything works fine. The module is loaded when it's added to stage and it receives correctly messages dispatched to it. But with the lazy policy the module never loads.
I may have missed something or there is somthing i don't understand because i tried the ModuleTest provided in example in cairngorm sources. It works fine (i mean loading the moduleA2 when receiving a message), but if i replace the change the lazyModulePolicy to listen to broadcasted messages instead of a pingMessage, the module never loads too.
<cairngorm:LazyModuleLoadPolicy objectId="lazyLoadPolicy" type="{ BroadcastMessage }" />
<cairngorm:ModuleMessageInterceptor
type="{ BroadcastMessage }" moduleRef="moduleA" />
public class BroadcastMessage
public function BroadcastMessage()
If someone has any clue, i'll be happy to test it =)
Thanks.Hello, back on my issue, i tested a little bit more the message dispaching.
I read the lazyLoadPolicy class and noticed that it always has to have a ModuleId property in the message to work, that's why the broadcast message didn't work to awake the module with the lazy loading policy.
So i added copy of my module:
<cairngorm:ParsleyModuleDescriptor objectId="test"
url="TestModule.swf"
applicationDomain="{ClassInfo.currentDomain}"
/>
<cairngorm:ParsleyModuleDescriptor objectId="testbis"
url="TestModuleBis.swf"
applicationDomain="{ClassInfo.currentDomain}"
/>
Set them both with a basicLoadPolicy, and tries to dispatch a message to only one of them using the ModuleId metatag. I then noticed that both modules received the message and not only the one i expected.
I then changed the ModuleMessageInterceptor configuration to dispatch to only one kind of module:
<cairngorm:ModuleMessageInterceptor type="{ OpenViewMessage }" moduleRef="test"/>
and this worked as expected. Only the first module catched the message. I am obiously messing with the ModuleId metatag but i cannot see what's wrong...
I compiled with
-keep-as3-metadata+=ModuleId
but this hasn't changed anything... -
I have a 13.5 month old Ipad2, wifi only that has had problems with wifi com from the beginning. I am learning that this is not unusual for apple. Any suggestions?
ronald1094Try #5.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Problem with whitespace then loading and saving xml
i do not know how to handle this problem. i modifed a texteditor to send XML to a server and load XML back to the container.
but then i do changes to the Textlayout it shows up like this --->
Text in Container not modifed
Text in Container modifed ---> with space beween the colorchanged string
Text inContainersend and loaded ---> i think this has something to to with the
TextFilter.export(_textFlow,TextFilter.TEXT_LAYOUT_FORMAT,ConversionType.XML_TYPE)
can someone give me a hint...Hi,
the link is --->
http://www.horstmann-architekten.de/contentmanagment/SimpleEditor.html
its a modified example of the texteditor provided by Adobe. You can send a xml to the server. and also read it from the server. You just use the xml identifer to give the xml a name.
Try it out:
1. change the text and
2. give a XML-Identifer
and then send it to the server. --> send to server
3. type in the XML-Identifer you have used and
4. load it from the server ---> Load from Server Button
evering works ok exept the columns formating.
I Think the colums Formating is not embeded in the XML as it should be. I attached the Files. (Newbie programmer)
With best regards
Michael Sprinzl
--- robin.briggs <[email protected]> schrieb am Do, 17.9.2009:
Von: robin.briggs <[email protected]>
Betreff: Problem with whitespace then loading and saving xml
An: "Michael sprinzl" <[email protected]>
Datum: Donnerstag, 17. September 2009, 2:12
Sounds like you have two different issues going on: (1) inline graphics aren't coming out correctly when you use the TextLineFactory, and (2) columns aren't working correctly. It's difficult for me to tell by looking at the application you link what is going wrong. One of the examples does seem to have columns working -- can you be more specific about what you're doing, and what results you are seeing? As for the inline graphics, there is a timing issue involved with using URLs, due to the asynchronous loading. See this comment in the docs for TextFlowTextLineFactory:
Note: When using inline graphics, the source property of the InlineGraphicElement object must either be an instance of a DisplayObject or a Class object representing an embedded asset. URLRequest objects cannot be used. The width and height of the inline graphic at the time the line is created is used to compose the flow.
- robin -
Problems with Photoshop cs4 for the Mac
I am having all kinds of problems with Photoshop CS4 for the Mac. When I boot the software it seems to work for a while then, I am unable to open upf a file in Photoshop. I drag a photoshop file over the application icon, the whole screen flickers and nothing happens. I am unable to quit Photoshop as the quit choice is grayed out and command-q will not make it quit. I have to force quit. I can repeat this pattern over and over. What is happening? How do I solve this problem?
--KenoliThanks for the reply. I am using Photoshop 11.0.1. I am using the latest version of Snow Leopard. I have found both Photoshop and Dreamweaver to be pretty buggy for several versions now. My suspicions were that they were really engineered for Windows and never really fully implemented for the Mac. Dreamweaver crashes or hangs on me three or four times a day if I us it all day and does various annoying things like refusing to respond to the delete key after I have used it for a while. I have pretty much stopped using it to some degree for that reason and also because there is other software that does a lot of coding things I do much more directly and simply. Also Dreamweaver always seems to struggle to quit when I tell it to quit (that is, it takes a long time and gets hung up at places before it quits) and once it does quit, I always get a message saying that it has unexpectedly quit (even when I have told it to quit).
The problems with Photoshop (starting with just taking a long time to load) have escalated to the point I described today, which makes it almost unusable. I just reinstalled Snow Leopard to see if there was anything buggy in the system software. I will report if problems go away.
Regarding both the refusal to open image files and the grayed out quit command, made me think something like you, i.e. there was some dialogue box open somewhere. However, I couldn't find anything and I don't use two monitors.
So . . . Adobe just seems to be getting more expensive and more buggy.
Incidentally, why is it still running in Rosetta rather than natively? Adobe now has a real Intel processor to work with.
--Kenoli -
when attempting launch of photoshopcc,I get a box with "could not load the MMX core routines module because it does not work with this version of PS... what does this mean and how do I correct it?
I did a search on my system and found the Photoshop has a fastcore plug-in. Creative Cloud includes a subscription version of CS6 version 13.1.2. I do not know if you installed that or not. The cc un-install may have done something. You may need to use Adobe Cleaner then Install The Perpetual CS6 version of Photoshop CS6 version 13.0.6 Mac or Photoshop CS6 version 13.0.1.3 PC and not the subscription CS6 extended version 13.1.2. Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 If you need to download the CS6 installer Download CS6 products.
You may also be able to recover your cs6 using an old system backup
fastcore.8bx on my system... -
I'm having problems with my memory load
I'm having problems with my memory load, because I have a few photos on my iPhone 5 (32GB) and has been detected that I am using 10GB of photos, and I only have 1,000 photos. Could someone help me?
Hi Fehmi76,
The article linked below details how to go about seeing what apps on your iPhone are using what amounts of space.
See how much storage you've used on your iPhone, iPad, and iPod touch
https://support.apple.com/en-us/HT201656
Regards,
Allen -
Hello!
I built up a web site and I want to test them using ANT. It works fine with other web page, however it doesn't work with web pages with "session" statement. For example in login.jsp I have the following statement
session.setAttribute("user", request.getParameter("userName"));
And if the user's name and password are correct, the user is directed to home.jsp, where i have the following statement to retrieve the user's name:
String id=session.getAttribute("user").toString();
In order to test the above 2 pages with ANT, I have the following code in builder.xml:
<?xml version='1.0'?>
<project name="proj" default="test" basedir=".">
<target name="test">
<get src="http://path/login.jsp?userName=id&passWord=1111" dest="1.html" />
</target>
</project>
When I run the script, I get the error that the home.jsp cannot be opened (see below)
[get] Error opening connection java.io.IOException: Server returned HTTP response code: 500 for URL: http://path/home.jsp
I am pretty sure the above error is caused by the "session" statement, because if I remove the statement in home.jsp, the page can be correctly opened. But I really need the "session" statement, Can someone tell me how to deal with it?
thanks a million.Usually with a 500 error there's more detail in a server log somewhere. Can you find anything in stderr.log or some such?
-
good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me
No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine. -
'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly. I have even done a repair to see if that works and it has not. Has anyone else found a new way to get it working?
Try Troubleshooting issues with iTunes for Windows updates.
tt2 -
I am trying to update my phone so I can save my info on my old phone & get a new phone, but I get a error that says "There was a problem with downloading teh software, the network connection timed out.." HELP! Not sure what my settings shoud be...
I never updated anything until now...I want o update my iPhone to the newest version, but i do not want ot loose all that I have on this phone. I was told I needed to update the operating systems so i can put things into the cloud for transport to new phone, but I am just not sure how to do this..Can you help out here??Dear Jody..jone5
Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
Goodluck
Atousa -
Hello , please am having a problem with my iphone 5 , the battery runs out quickly ,another problem also if i turn on 3G it will run faster , 15 minutes and the iphone battery will be out . My final problem is that "no service " appears a lot especially when opening wifi or 3G , can you help ?
Your battery is running quickly because your cellular data connection is weak.
Is your phone carrier a supported carrier: Wireless carrier support and features for iPhone in the United States and Canada - Apple Support
For your no service issues: If you see No Service in the status bar of your iPhone or iPad - Apple Support
Maybe you are looking for
-
I'm having a problem playing some ItunesU videos, some play okay, some just show black screen and don't play, others show a still image but then doesn't play when trying to view them from itunes store. The audio files play with no issues. I am using
-
Returning Name and Username from People Picker Field in Visual Web Part
Dear All I am creating a visual web part that displays a list that I have created in SharePoint. One of the fields in the list is a People & Groups column type (People Picker) called 'Presented by'. In my web part, I would like to display the usernam
-
LR5 will not open ANY existing catalog
LR5.4, MacBook Pro, all catalogs on 256 SSD intermal, photos on external drive. Experienced LR user (since beta tester for v1) I am a CC subscriber, but LR is previous buy and under serial number. New problem: LR will not open any of my 5 catalogs. W
-
How do I open an fjsw file on my mac pro?
-
It's on an Acer netbook, running XP; after Outlook Express 'was unable to open' it's 'message store. Your computer may be out of memory or your disc is full.' (Neither of those is anywhere near being the case!) Sent it's error report to MS but no rep