Problems with Apache PHP Mysql

I tried doing an upgrade from Tiger to Leopard server but was having lots of issues while working with the virtual sites I have hosted. I tried a clean install and I was still unable to get Apache php and mysql to work together. Each service was starting fine but when I would try to run a php file it would only display a white page. Under the upgrade instead of displaying the page it was downloading any page I tried to load.
In the new clean install I enabled phplib5 through server admin but even a simple info.php file with <?php phpinfo(); ?> was only giving me a white page. I dont know if mysql was interfacing with php and apache at this point cause I could not get any further. I mainly just want to be able to run wordpress which is a php blog that uses a mysql database.
I have heard some people talking about mamp installs and not using the stock web services but I did not know if that would be a smart route to take.

well the problem come in that you could end out with multiple releases of the same application when the idea is to make one package "stable"
would you rather have a debain package data base that has seventeen apache's or one stable full featured apache?
as for a server/stable tree for production machines this is coming. implimentation is not the trouble it is time that is a factor.

Similar Messages

Apache, PHP, MySQL, phpMyAdmin

Hi, I'm upgrading to snow leopard and I want to setup my local webserver but I had some problem with phpmyadmin and mysql.
I've activated the pre-installed apache server from the system preferences panel and I've uncommented the load module of the php5 from the httpd.conf.
Which version of MySQL I have to use? And how can I configure the phpMyAdmin?
I've done this on my macbook with leopard, but I'm not beb able to do it on my iMac with snow leopard.

raskolnikov wrote:
Log files are in /var/log/httpd/, you should check at least error_log
LAMP works for me, so it may be a configuration issue.
Umm.. well I know where the log files are for apache, but they're unlikely to help me fix mpd I found the .error and .log files for mpd, they're in $HOME/.mpd/ , but they're both empty! This is really frustrating.. what the hell can it be? mpd was fine yesterday.. it connects on the default port, 6600, is it possible that one of the LAMP pieces of software is interfering with this? Yet if that were the case, surely me stopping all the LAMP-related daemons would allow me to start mpd...
The only other thing I've change since yesterday is my /etc/hosts:
127.0.0.1 localhost.localdomain localhost kaminoitte
That's fine though, isn't it?
Gaargh, this is doing my head in :evil:
EDIT: Aah.. it might be a groups problem.. maybe. I've got it in my mpd.conf to run under user 'dave', but I accidentally used 'useradd' instead of 'usermod' yesterday when adding myself to the mysql group I made, so I may be missing from one of the necessary groups. I added myself back to optical and video yesterday.. would someone using mpd be good enough to post 'grep [mpd_username] /etc/groups' for me?
EDIT2 (1 minute later): Hehe, I just noticed I didn't add myself back to 'audio'... what a muppet. Problem solved! XD

Problem with BigInteger and MySql

Hi !!
I've a problem with BigInteger and MySql.
I've a BigInteger object (suppose that value is 0.02270412445068359375).
I must store that value in a database (MySql).
The value of BigInteger object must be stored in a column of type Decimal.
Stored value is 0.022704124450683594. Why ??
My target is to store 0.02270412445068359375
Can anyone help me?
Thanks.

Hi !!
I've a problem with BigInteger and MySql.
I've a BigInteger object (suppose that value is
0.02270412445068359375).
I must store that value in a database (MySql).
The value of BigInteger object must be stored in a
column of type Decimal.if this is the case I fear you are SOL. a decimal is the same size as a double but with a fixed max number of decimal places. if it isn't big enough then you have no real choice other than to VARCHAR it.
Stored value is 0.022704124450683594. Why ??
My target is to store 0.02270412445068359375
Can anyone help me?
Thanks.

Right problem with apache and tomcat

Bonjour;
I use a user login "apache" to stop/start Apache and tomcat. Because never launching apache et tomcat as root.
But I have the following problem with apache (file error.log) :
[Tue May 6 17:26:22 2003] [error] Connection "warpConnection" cannot connect
[Tue May 6 17:26:22 2003] [error] Cannot open connection "warpConnection"
[Tue May 6 17:27:01 2003] [error] Re-Trying to deploy connections
As root the error msg does'nt exists (lost)
Best regards;
A+;

Run it from the shell to see whats wrong:
# httpd

Problem with javascript/PHP/ oracle 10g smart quotes

I have a problem with my php form that passes the text field to a javascript object. When I copy text from MS Word that includes smart quotes, the form inputs that into the database as ? (upside down) marks. The charset of the DB is WE8MSWIN1252. How do I store these smart quotes as regular quotes? And also if I can do any conversions on the front end (js or php). I tried doing some conversion but to no avail. Any help would be appreciated thank you. “double”

Decide if you want your HTML pages in Windows code page 1252 or Unicode UTF-8. Then, make sure the pages are properly tagged as either "text/html;charset=windows-1252" or "text/html;charset=utf-8". Use HTTP header Content-type or the corresponding <META HTTP-EQUIV=...> tag. Then, set NLS_LANG environment variable for your PHP engine to either AMERICAN_AMERICA.WE8MSWIN1252 or to AMERICAN_AMERICA.AL32UTF8, depending on which encoding you selected for your HTML.
-- Sergiusz

I need help with DW, PHP & MySQL please.

Hello, I am new to website development and am trying to set up a form for collecting data on my website and have a question that I can’t find an answer to anywhere else. I was wandering if someone there would be kind enough to help? I am using Dreamweaver in CS4 and my host already has PHP & MySQL installed on the server that I can use. My question is: Do I need to download XAMP or WAMP on my computer before trying to connect my form to the server? Also, do I need to change the page I am putting the form on to .PHP extension or can I just embed the PHP form into an existing HTML page?
Most of the training tutorials I’ve read don’t start at the most basic beginning but rather expect people to already have a basic knowledge of the topics they are trying to learn. If anyone knows the best place to get answers to the most basic questions like this one or a beginners guide to working with DW, PHP & MySQL I will gladly go there rather than waste your time on questions you’ve probably already answered a bezillion times.
Thank you for the help.

Strictly speaking, you don't need XAMPP or WAMP on your local computer. But if you're serious about getting involved with PHP/MySQL, you should definitely set up a local testing environment with one or the other. It's safer and more efficient. Don't expose all your errors on a live server. You can find instructions on how to set up a testing environment here: http://www.adobe.com/devnet/dreamweaver/articles/setting_up_php.html.
To develop with PHP, you should always use a .php file name extension. Any other choice is very rare.
There's a tutorial on building your first dynamic website with DW here: http://www.adobe.com/devnet/dreamweaver/articles/first_dynamic_site_pt1.html.
For more in-depth help, you might want to consider grabbing hold of a copy of "The Essential Guide to Dreamweaver CS4 with CSS, Ajax, and PHP". (Yes, I wrote it, so it's a bit of shameless self-promotion, but you'll find it answers many of your questions - and probably a lot you hadn't even thought of.)

Apache php mysql installation on arch

does anyone have a tutorial on how to install :
- apache
- php
- mysql
on Archlinux
i have installed apache
pacman -S apache
pacman -S php
pacman -S mysql
but apache won't start : /etc/rc.d/httpd start - it gives me FAIL
and when i try httpd it give a nasty error
httpd: arp_sockaddr_info_get() failed for pufos (pufos - the linux box name)
httpd: Could not reliably determine the server's fully qualified domain name , using 127.0.0.1 for ServerName
is because i didnt configureg good httpd.conf or what
anyway , a tutorial for installing apache php and mysql would be perfect.
Thank guys

pacman -S mysql
/etc/rc.d/mysqld start
:: Adding mysql group
/etc/rc.d/mysqld: line 14: groupadd: command not found
:: Adding mysql user
/etc/rc.d/mysqld: line 19: useradd: command not found
chown: 'mysql.mysql': invalid user
:: Starting MySQL [FAIL]
omg , if the mysql installed through pacman get stuck cause 'useradd' does not exist as a command .... huuuh
??? any sugestions ?

PHP installed with Apache, php pages showing nothing [SOLVED]

I've followed a couple of guides to install a LAMP stack on my Arch install, and I seem to have done everything correctly (no errors anyway...), but I still can't see anything on my basic phpinfo page.
Viewing source shows nothing.
Is there anything commonly missed out I should be looking for, in order to get it showing properly?
If there's any more specific information I can give, please let me know. I'm new to these forums and realise I'm lacking detail, but any pointers would be greatly appreciated.
Thanks,
Adam
Last edited by tsdadam (2015-02-26 22:03:56)

Here's my httpd.conf, I've not moved those lines yet,
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/etc/httpd"
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:/run/httpd
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authnz_fcgi_module modules/mod_authnz_fcgi.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
#LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule data_module modules/mod_data.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule deflate_module modules/mod_deflate.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
LoadModule mime_module modules/mod_mime.so
#LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule logio_module modules/mod_logio.so
#LoadModule lua_module modules/mod_lua.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule dialup_module modules/mod_dialup.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_prefork_module modules/mod_mpm_prefork.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
#LoadModule suexec_module modules/mod_suexec.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
#LoadModule imagemap_module modules/mod_imagemap.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
AllowOverride none
Require all granted
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.4/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# AllowOverride FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Require all granted
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
#Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
LoadModule php5_module modules/libphp5.so
AddHandler php5-script php
Include conf/extra/php5_module.conf

Problems with apache

I downloaded XAMPP Moodle today to do some development and found that apache would not start. It complained that Web Sharing was already turned on in System Preferences and that I should turn it off. When I checked in System Preferences, all indications were that Web Sharing was not enabled. Furthermore, when I tried to turn it on from System Preferences, it would not do so. I opened up http://localhost and my own user account (i.e. localhost/~micah) functions properly and httpd shows up as three processes in Activity Monitor (one under root and two under _www).
I am confident that I can kill it (using sudo), but I'm not confident that it will not come back in the same way when I restart. Also, how does System Preferences deterine whether or not httpd is running? Does it check the process list? Does it check the port? Is there a pid file? Why does it not show up properly in System Preferences?
How do I properly fix this situation?

AstroNauts wrote:
Thanks for your response!
Okay, done. Moved it from /Library/WebServer/Documents to /Sites/, stopped working. Now I suppose I have to look into the CGI?
(apologies, haven't been near this project for a while).
Okay, it now works!
Following your hint about the CGI, I uncommented the line below. I don't why it was commented (or should be), but it now works. Had some other help stating it was indeed a problem with how to handel php.
We're cool, now; thank you for your responses and help!
Best,
-Pim
+LoadModule fastcgi_module libexec/apache2/mod_fastcgi.so+

Apache php mysql mac 10.4.8 client

does anyone know the version of php mysql and apache on 10.4.8 if it's shipped with osx and how to upgrade them
Mac OS X (10.4.8)

mysql is not shipped... unless youre talking about osx server then it may be.
php is 4.4.1 and the path is /usr/bin/php and /usr/lib/php
apache is 1.3.33 and the relevant paths are /usr/libexec/httpd and /usr/sbin
I wouldnt reommmend upgrading any of them because its possible they could be broken by future system updates, although i dont specifically know of this ever happening. but for development purpouses its better to isolate your environment. Instead of upgrading the system versions i would recommend installing the versions you wish into /usr/local and jsut setting things up to run from there. Marc Lyiange's php packages do this for you by default (www.entropy.ch). MySQL also comes as a mac binary and installs into /usr/local. As for Apache that will require some configuration What i would do is install it into usr/local. Then i would rename /usr/sbin/httpd to /usr/sbin/httpd-1.3.33 and /usr/sbin/apachectl to /usr/sbin/apachectl-1.3.33. then make symlinks to /usr/local/apachedir/bin/apachectl and /usr/local/bin/httpd to /usr/sbin/httpd and /usr/sbin/apachectl.
Of course you could always change the appropriate plists to just run your version of apache but i dont know what those are off hand. For what its worth unless you need a particular module thats not supported on 1.3.33 i wouldnt even mees with apache 2.0. its jsut not worth the effort in my opinion.

Any problem with a single MySQL database used on more than one site?

I have a set of multiple sites hosted separately I'm working on. I'd like to set up a PHP/MySQL database on one site, and be able to pull data from it for completely separate sites. Seems like it shouldn't be a problem. Are there any problems with doing this I need to be aware of?

I've set up databases on three different hosts, and in all cases I could access the databases from outside the domain of the site itslef. GoDaddy is one of them, they used to restrict it, but now they give you the option when setting up a new database on your account.

New MS patch problems with Apache & SSL on NetWare web serve

This week our users began to experience problems accessing our Intranet based on a NetWare 6.5 box running Apache and using a Verisign SSL certificate. IE would say it was connecting but you would never get there. Firefox could get to the server but I had similar problems with Safari & Chrome.
I discovered that the MS security patch KB980436 had modified some portion of IE and was causing the problem. Uninstalling that patch put us back to where we could once again access our Intranet.
This seems to have something to do with how IE accesses using the SSL 443 port. When, internally, I accessed this same site using http instead of https it worked perfectly.
This patch was applied to Win XP and Win 7 with the same bad results.
If there is a more appropriate place for this post please move it there.

Have you tried the registry settings to go back to compatible mode? The
settings are listed in the MS KB article.
"boomchuck" <[email protected]> wrote in message
news:[email protected]..
>
> This week our users began to experience problems accessing our Intranet
> based on a NetWare 6.5 box running Apache and using a Verisign SSL
> certificate. IE would say it was connecting but you would never get
> there. Firefox could get to the server but I had similar problems with
> Safari & Chrome.
>
> I discovered that the MS security patch KB980436 had modified some
> portion of IE and was causing the problem. Uninstalling that patch put
> us back to where we could once again access our Intranet.
>
> This seems to have something to do with how IE accesses using the SSL
> 443 port. When, internally, I accessed this same site using http
> instead of https it worked perfectly.
>
> This patch was applied to Win XP and Win 7 with the same bad results.
>
> If there is a more appropriate place for this post please move it
> there.
>
>
> --
> boomchuck
> ------------------------------------------------------------------------
> boomchuck's Profile: http://forums.novell.com/member.php?userid=28653
> View this thread: http://forums.novell.com/showthread.php?t=418742
>

Any reason why a .exe projector would not communicate with a php/mysql

hello;
I have a .dcr in a directory, that when runs from a browser does everything as expected: calls php/mysql, etc;
however, I have a .exe in that same directory, published at the same time, but does not seem to be getting the php/mysql calls...
any thoughts please... thanks.

currently everything is running on my computer ( win xp with apache server with php/mysql modules ) ... I currently use my default winxp firewall ... hmm, maybe I should turn it off and see what happens

Problem with Apache reverse proxy after applying SP13 NW

Hello,
we have a NW04 EP Portal and a Apache reverse proxy in the DMZ. After applying SP 13 for the portal we get the following error from the reverse proxy:
Proxy Error
The proxy server received an invalid response from an upstream server.
The proxy server could not handle the request GET /irj/.
Reason: Error reading from remote server
Apache/2.0.52 (Win32) mod_ssl/2.0.52 OpenSSL/0.9.7e Server at servername.company.de Port 443
Is is it possible, that there is a problem with sp13?
Best regards
Daniel Holstein

Hi Daniel,
ok I`ll try to find a solution in parallel and keep you up to date.
In the following my settings in case I missed something:
<VirtualHost test.firma.de:443>
SSLEngine on
SSLProxyEngine on
SSLCertificateFile /apache/keys/pac_ssl_qep_dmz_server.crt
SSLCertificateKeyFile /apache/keys/pac_ssl_qep_dmz_server.key
ServerName test.firma.de:443
ServerAdmin [email protected]
LogLevel debug
ErrorLog logs/ssl_443_error
CustomLog logs/ssl_443_access_log common
ProxyVia Off
ProxyPreserveHost On
ReWriteEngine on
ReWriteLogLevel 0
ReWriteLog logs//ssl_443_rewrite_http.log
ProxyPass / https://backend.firma.de:50001/
ProxyPassReverse / https://backend.firma.de:50001/
</VirtualHost>
Regards, Jens

[JAVA] problems with java and mysql

Hi, i have already installed php + mysql and work's them fine, but i want to install java + mysql. I have downloaded eclipse and installed its, that's ok. I have download tomcat and, that's ok. I have download module jconnector and have copied the file .jar in the java home and set classpath. Run and compiled this source that's ok. At runtime the program ask: Impossible connection at the database, why ? It's the source of program:
[JAVA]
import java.sql.*;
public class connessione {
private String nomeDB; // Nome del Database a cui connettersi
private String nomeUtente; // Nome utente utilizzato per la connessione al Database
private String pwdUtente; // Password usata per la connessione al Database
private String errore; // Raccoglie informazioni riguardo l'ultima eccezione sollevata
private Connection db; // La connessione col Database
private boolean connesso; // Flag che indica se la connessione � attiva o meno
public connessione(String nomeDB) { this(nomeDB, "", ""); }
public connessione(String nomeDB, String nomeUtente, String pwdUtente) {
this.nomeDB = nomeDB;
this.nomeUtente = nomeUtente;
this.pwdUtente = pwdUtente;
connesso = false;
errore = "";
// Apre la connessione con il Database
public boolean connetti() {
connesso = false;
try {
// Carico il driver JDBC per la connessione con il database MySQL
Class.forName("com.mysql.jdbc.Driver");
// Controllo che il nome del Database non sia nulla
if (!nomeDB.equals("")) {
// Controllo se il nome utente va usato o meno per la connessione
if (nomeUtente.equals("")) {
// La connessione non richiede nome utente e password
db = DriverManager.getConnection("jdbc:mysql://localhost/" + nomeDB);
} else {
// La connessione richiede nome utente, controllo se necessita anche della password
if (pwdUtente.equals("")) {
// La connessione non necessita di password
db = DriverManager.getConnection("jdbc:mysql://localhost/" + nomeDB + "?user=" + nomeUtente);
} else {
// La connessione necessita della password
db = DriverManager.getConnection("jdbc:mysql://localhost/" + nomeDB + "?user=" + nomeUtente + "&password=" + pwdUtente);
// La connessione � avvenuta con successo
connesso = true;
} else {
System.out.println("Manca il nome del database!!");
System.out.println("Scrivere il nome del database da utilizzare all'interno del file \"config.xml\"");
System.exit(0);
} catch (Exception e) { errore = e.getMessage(); }
return connesso;
public static void main(String [] args) {
connessione a=new connessione("asta","root","");
if(a.connetti())
System.out.println("Connessione al database riuscita");
else
System.out.println("Connessione al database non riuscita");
[JAVA]

With this line I always pass the username and password also:
db = DriverManager.getConnection("jdbc:mysql://localhost/" + nomeDB);
db = DriverManager.getConnection("jdbc:mysql://localhost/" + nomeDB, useName, Password);
Make sure you create your users in MySQL with the correct permissions

Problems with Apache PHP Mysql

Similar Messages

Maybe you are looking for