Problems with ColdFusion Extensions and CF/Flex Application Wizard

I have configured the Eclipse RDS according to the
instructions in the help documentation. The RDS Fileview and
Dataview work OK, but I haven’t had any luck with the
Services Browser: when I try to expand (+) the localhost item, the
only thing that appears is the message “Unable to get meta
data for cfc.”
The Dreamweaver 8 Components panel, which shows exactly the
same information, works fine.
Perhaps related to the above: when I create a Flex project
with the CF/Flex Application Wizard and look at the project
properties, in the Flex Server section, I get "Since this project
does not use a server, these setting do not apply". I find this
odd: a ColdFusion project that doesn’t use a server? Anyway,
using the wizard, I have not been able to create a simple project
that works.
If anyone has had similar problems and has been able to solve
them, I would appreciate some light on the subject.
Carlos

Well I was able to resolve this problem by un-installing and
re-installing CF.
I did some further testing (un/re-install again) and it
appears that this problem occurs when CF is installed in devnet
version mode and not if in developer mode.
To check if CF is installed in devnet mode look in the CF
Administrator under "server settings->settings
summary->version information" You will see a notation for
devnet.
I also did a little poking around and this happens whenever
you install CF using a certain range license keys. The keys in this
range are valid keys for installation but they alter some critical
settings in CF (the flash paper/pdf watermark and apparently some
RDS stuff) The solution is to install with a non dev-net key or in
developer mode.

Similar Messages

Update problems with Premiere Pro and AAM (Adobe Applications Manager)

I am using Premiere Pro CS6 via a Creative Cloud subscription and am having a problem. AAM (Adobe Application Manager) says that Premiere Pro needs updating to 6.0.1 but if I run Premiere Pro and check it's version, it says it already is 6.0.1 - so how would AAM fail to understand that PP is at 6.0.1 when PP knows that it is already there??
So guess the real question is what does AAM use to decide what version the different apps are at and then tell you which updates you need to install? And how might it have gotten confused?
And most of all, how to "un-confuse" AAM?
Please don't suggest uninstalling PP - because with CC and AAM, then you have to re-download the entire app once again from inside AAM - it doesn't keep the install media around after it has installed it, but insists on downloading the same version yet again, and taking another hour or two to get back to where it was the last time it downloaded the app.
Any suggestions??
Thanks ...
-Bob

Hi Bob,
I was having a similar issue.
I was getting a dialog, when exporting from Pr informing me that there was a codec update available for Pr, and that I should update via help. But the AAM kept telling me that everything was up to date.
I just tried to repeat the problem to respond to your post ... and it isn't happening anymore!
It may not be happening anymore because I opened Adobe Media Encoder CS6 outside of Pr this morning. That is all I have done outside my normal rutine since the last time I had the annoying dialog...
Kind of grabbing at straws.
Cheers,
DK

I installed Lion and now seem to have problems with Microsoft Silverlight and other plug ins and applications. I haven't ever used time machine to back up (my bad I know). Is there a way to go back to snow leopard with messing up all my files and my set

I installed Lion and now seem to have problems with Microsoft Silverlight and other plug ins and applications. I haven't ever used time machine to back up (my bad I know). Is there a way to go back to snow leopard with messing up all my files and my set?

Are you using the latest version of Silverkeeper? - v.2.0.2 is stated to be compatible with Snow Leopard.
http://www.lacie.com/silverkeeper/
If it's messing things up you could try asking LaCie Support for assistance.

How to create new file extension and associate an application with it?

Hi,
I want to create a new file extension named ".emsof" and
associate any text editor with it like notepad++ in windows 8.1
Moreover all of these files should be searched by having filter of "*.emsof" like any other ordinary files.
Please guide me about hoe to do it?
Thanks.

Hi BurrWalnut,
Thanks for the help.
Will this command also allow me create and save file with .emsof extension and to filter files through .emsof extension (Like we can filter through .doc or .txt extension)???
1. I don’t know what you mean by ‘filter’. In your initial post you mentioned searching, if that’s what you mean, you can search for any extension.
2. An easy to understand example of the assoc and ftype commands is a .txt file, which we all use in Notepad:
Typing assoc .txt in a cmd prompt will return txtfile (the file type).
Typing ftype txtfile will return %SystemRoot%\System32\notepad.exe %1 (the full path of the program and %1 representing a passed parameter).
Alternatively, look in the registry hive HKEY_CLASSES_ROOT for .txt and further down for txtfile.
3. If you add an entry that is later unwanted, you can easily delete it by typing assoc .emsof= and pressing Enter. Then delete the filetype by typing ftype myext= and pressing Enter. You can, of course, just delete the entries in the registry (nor recommended
for beginners).
4. Test it out now but be aware not to use extensions or filetypes that currently exist.
5. Display all extensions and their associated file types by firstly copying the following 4 lines:
assoc >"%userprofile%\desktop\assoc.txt
start notepad "%userprofile%\desktop\assoc.txt
exit
cls
Press the Windows Logo key+X (or right-click or press and hold the bottom left corner) and choose Command Prompt/Windows PowerShell (Admin). Using the mouse right-click, paste the 4 copied lines to the Command Prompt window. A .txt file is created on the Desktop
and Notepad will open and display the list. The list represents the registry keys located in the merged HKEY_CLASSES_ROOT. In the left pane, look for the extension, for example .txt. The (Default) field in the right pane contains the file type, e.g. txtfile.
6. Now display all file types and their associated programs by substituting the above 4 lines with these:
ftype >"%userprofile%\desktop\ftype.txt
start notepad "%userprofile%\desktop\ftype.txt
exit
cls
Another .txt file is created on the Desktop and Notepad will open and display it. This list represents the registry keys in HKEY_CLASSES_ROOT further down beyond the extensions. Look for the file type, for example txtfile, then click or tap shell\open\command.
In the right pane, the (Default) field shows the full path of the program that opens it, e.g. notepad.
7. NOTE. In operation, any keys in HKEY_CURRENT_USER\Software\Classes (current user) take precedence over those in HKEY_LOCAL_MACHINE\Software\Classes (all users) and both keys appear as the merged HKEY_CLASSES_ROOT. Any changes should be made to HKCU and
HKLM. The HKEY_CLASSES_ROOT keys are intended to be read from, not written to.

Problem with java, ASCII and Linux

Hi Friends,
I has a Linux RedHat 9.0 with a jre1.5.0_04 (rpm package of Sun).
I has a problem with ASCII , for example :
import java.io.*;
public class HolaMundo
public static void main (String[] args)
System.out.println("Hol� M�ndo");
this programs runs ok on my windows jdk so it prints "Hol� M�ndo", but when i run the same HolaMundo.class program on my linux redhat it prints "Hol�� M��ndo"
I think the problem is with the ASCII table that uses the linux version of jre, but i dont know how to solve this problem. I need a Spanish-European ASCII table on my application but i think it is working with a US-ASCII table.
Then i has installed a kaffe 1.0 (rpm) java machie on this linux and this solve the problem but i has another problems of compatibility with this old version of java kaffe.
Do you know whats happening?
Thanks in advance.

The problem doesn't have to do anything with Java or Linux as far as i can see. It's more likely a problem with Windows XP and IE. Be assured that normally downloading the Linux JDK in windows is not a problem.

Problem with the MenuBar and how can i delete a own component out of the storage

Hello,
I opened this thread in the category "Flex Builder 2", but
under this category my questions fit better.
I have a problem with the MenuBar and a question to delete a
component out of storage.
1. We have implemented the MenuBar, which was filled
dynamically with XML data.
Sporadically it will appear following fault, if we "mousover"
the root layer.
RangeError: Error #2006: Der angegebene Index liegt
außerhalb des zulässigen Bereichs.
at flash.display::DisplayObjectContainer/addChildAt()
at mx.managers::SystemManager/
http://www.adobe.com/2006/flex/mx/internal::rawChildren_addChildAt()
at mx.managers::SystemManager/addChild()
at mx.managers::PopUpManager$/addPopUp()
at mx.controls::Menu/show()
at mx.controls::MenuBar/::showMenu()
at mx.controls::MenuBar/::mouseOverHandler()
Here a abrid ged version of our XML to create the MenuBar:
<Menuebar>
<menu label="Artikel">
<menu label="Artikel anlegen" data="new_article" />
<menu label="Artikel bearbeiten" data="edit_article" />
<menu label="Verpackung">
<menu label="Verpackung anlegen" data="new_package" />
<menu label="Verpackung bearbeiten" data="edit_package"
/>
</menu>
<menu label="Materialgruppe">
<menu label="Materialgruppe anlegen"
data="new_materialgroup" />
<menu label="Materialgruppe bearbeiten"
data="edit_materialgroup" />
</menu>
</menu>
</Menuebar>
It is a well-formed XML.
2. Delete a component out of storage
We have some own components (basically forms), which will be
created and shown by an construct e.g.
var myComponent : T_Component = new T_Component ;
this.addChild(myComponent)
Some of our forms will be created in an popup. On every call
of the popup, we lost 5 mb or more, all childs on the windows will
be removed by formname.removeAllChild();
What cann we do, that the garbage collector will dispose this
objects.
Is there a way to show all objects with references (NOT
NULL)?
I have read in the Flex Help, that
this.removeChild(myComponent) not delete the form and/or object out
of the storage.
Rather the object must be destroyed.
It is sufficient to call delete(myComponent) about remove
this object out of the storage as the case may be that the
garbage-collector remove this object at any time?
Or how can I destroy a component correctly. What happens with
the widgets on this component e.g. input fields or datagrids?
Are they also being deleted?
Thanks for your help.
Matze

If you mena the "photo Library" then you cannot delete it.
This is how iphone handles photos. There are not two copies. There a re simply two places from which to access the same photos. ALL photos synced to iphone can be accessed via Photo Library. Those same pics can be accessed via their individual folder.

Hello apple I have the problem with my iPhone and my friends have this problem too. My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it bu

Hello apple
I have the problem with my iPhone and my friends have this problem too.
My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it but when answer both of us can't hear anything and when I put my iPhone to my face the screen is still on and when I quit the phone application and open it again it will automatic call my recent call. And when my friends call me my iPhone didn't show anything even the missed call I'm only know that I missed the call from messages from carrier. Please check these problem I restored my iPhone for 4 time now in this week. I lived in Hatyai, Songkhla,Thailand and many people in my city have this problem.
Who have this problem??

Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$

Problem with upgrade Extension Manager 6.0.4

Problem with upgrade Extension Manager 6.0.4, code error U44M1P7

What version of the Adobe Application Manager are you using? Which operating system are you using?

I am using iPhoto 11 and my library has 736.5mb on disk. I have problems with iPhoto stalling and needing to force quit. I have rebuilt my library. Can you suggest anything else?

I am using iPhoto 11 and my library has 736.5mb on disk. I have problems with iPhoto stalling and needing to force quit. I have rebuilt my library. Can you suggest anything else? Thanks, Rose

Make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
If that does'nt help log into another user account on your Mac and try iPhoto from there.

I have a problem with Apple store when installing large application: The system crashes. Any suggestion?

I have a problem with Apple store when installing large application (example xCode): The system crashes.
It begun with 10.8 usualy with few tries it work but with 4.6 no succes.
Any suggestion?

If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select the most recent panic log under System Diagnostic Reports. Post the entire contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

How to Build and Deploy Flex application in EP6

Hi All,
Can anyone tell how to build and deploy Flex application in EP6.
I want to build a normal application in flex and present it through iviews. How do I configure my Iiview to have flex component running in Portal Environment.
Thanks
Deepak

A good book to start with is Enterprise JavaBeans by Monson-Haefel (O'Reilly press). It covers deployment of EJBs on J2EE servers. Also check out sites specific to your server, sometimes they have specific requirements (like Weblogic).

[svn] 4836: Fix problems with asdoc comments and conditionally compiled definitions.

Revision: 4836
Author: [email protected]
Date: 2009-02-04 11:07:52 -0800 (Wed, 04 Feb 2009)
Log Message:
Fix problems with asdoc comments and conditionally compiled definitions. Fixes bug http://bugs.adobe.com/jira/browse/ASC-3649
Ticket Links:
http://bugs.adobe.com/jira/browse/ASC-3649
Modified Paths:
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/embedding/Compiler.java
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/semantics/ConfigurationEvaluator.java

In the default php.ini is set open_basedir which limits work with php only to few directories (and directories bellow them). There is set /srv/http, /home,/tmp and /usr/share/pear by default.
To allow your vhost you should add /data/www or set empty value.

Problems with ListViews Drag and Drop

I'm surprised that there isn't an Active X control that can do this more
easily? Would
be curious to find out if there is - although we aren't really embracing the
use of
them within Forte because it locks you into the Microsoft arena.
---------------------- Forwarded by Peggy Lynn Adrian/AM/LLY on 02/03/98 01:33
PM ---------------------------
"Stokesbary, Michael" <[email protected]> on 02/03/98 12:19:52 PM
Please respond to "Stokesbary, Michael" <[email protected]>
To: "'[email protected]'" <[email protected]>
cc:
Subject: Problems with ListViews Drag and Drop
I am just curious as to other people's experiences with the ListView
widget when elements in it are set to be draggable. In particular, I am
currently trying to design an interface that looks a lot like Windows
Explorer where a TreeView resides on the left side of the window and a
ListView resides on the right side. Upon double clicking on the
ListView, if the current node that was clicked on was a folder, then the
TreeView expands this folder and the contents are then displayed in the
ListView, otherwise, it was a file and it is brought up in Microsoft
Word. All this works great if I don't have the elements in the ListView
widget set to be draggable. If they are set to be draggable, then I am
finding that the DoubleClick event seems to get registered twice along
with the ObjectDrop event. This is not good because if I double click
and the current node is a folder, then it will expand this folder in the
TreeView, display the contents in the ListView, grab the node that is
now displayed where that node used to be displayed and run the events
for that as well. What this means, is that if this is a file, then Word
is just launched and no big deal. Unfortunately, if this happens to be
another directory, then the previous directory is dropped into this
current directory and a recursive copy gets performed, giving me one
heck of a deep directory tree for that folder.
Has anybody else seen this, or am I the only lucky one to experience.
If need be, I do have this exported in a .pex file if anybody needs to
look at it more closely.
Thanks in advance.
Michael Stokesbary
Software Engineer
GTE Government Systems Corporation
tel: (650) 966-2975
e-mail: [email protected]

here is the required code....
private static class TreeDragGestureListener implements DragGestureListener {
     public void dragGestureRecognized(DragGestureEvent dragGestureEvent) {
     // Can only drag leafs
     JTree tree = (JTree) dragGestureEvent.getComponent();
     TreePath path = tree.getSelectionPath();
     if (path == null) {
          // Nothing selected, nothing to drag
          System.out.println("Nothing selected - beep");
          tree.getToolkit().beep();
     } else {
          DefaultMutableTreeNode selection = (DefaultMutableTreeNode) path
               .getLastPathComponent();
          if (selection.isLeaf()) {
          TransferableTreeNode node = new TransferableTreeNode(
               selection);
          dragGestureEvent.startDrag(DragSource.DefaultCopyDrop,
               node, new MyDragSourceListener());
          } else {
          System.out.println("Not a leaf - beep");
          tree.getToolkit().beep();
}

Problems with Customer Service AND unexplained charges!

I've been with Verizon for I-don't-know-how-many years, and through the years you are bound to have a few problems here and there but some of the problems are just ridiculous! It's also the same reocurring problem!!!!!!!!!!!!!!!! I was with Alltel first, before it was bought out by Verizon. The years I was with Alltel, I didn't have near as many problems. It seems EVERY time I do the smallest change or something to my phone or bill, I get a ridiculous amount of charges that I was NOT aware of, nor told about... EVEN IF I ask "So this isn't going to change my bill, or there will not be any unexpected/unexplained charges that I don't know about?"... BUT not matter how many times I ask... and NO matter how many times I am told "no"... there always is. For example.... last year, I updated and signed a new 2 year contract and purchased the first Driod. Before, my 30 day warranty was up, I was having problems with my Driod, and decided to send it in and get a new one. Before I did this.. I called customer service to make sure there would be no interuption in my bill, and there wouldn't be any unexpect charges, and there would be no difference in anything. I was told there was not, and once I recieved my new phone, just send it in and nothing would be changed. Of course, when I get my bill.. I see I was charged $500 for the new phone. It was explained to me that my credit card was reimbursed (which I never check that card, because I never used it expect to purchase the phone) and that I was recharged for the new phone, since it was a new phone. So I had to fork out the $500 (on top of my bill) and then wait months to get the $100 rebate card. Months after that, I "assumed liablity of my line" because I was on a plan with my family. I decided to have my own line, so I "assumed liability." I was not told that when I did that, I "renewed" my contract date. So I just added 6 more months to my 2 year contract. Was NOT told about that! Then again...... I was recently having problems with my Driod (the screen went black and would not come back on.) I had to turn on an OLD motorola razor, so I would not be without a phone for two days while I was waiting on my phone to come in. As soon as my phone came in, I had my Droid turned back on. I recieved my bill recently, and my bill was $200 over what it normally should be.... so I called in... apparently, when I had my phone replaced, they dropped off my data package and when I recieved my replacement driod, they never put it back on. So I was being charged for alllll my data usage... again I was NOT told about this. I wasn't even aware that they had dropped off my data package, and when/where did they get the authority to do that??? These are just a FEW of the problems that I have had.................................
Does anyone have these reoccuring problems!?

I understand that my bill can be viewed online, and I do view it fairly regularly, so if there are any unexplained charges, I can call Verizon asap. The problem does not come from me not understanding my bill, but from customer service. I have been with Verizon for a very long time, and it is a continuing problem. Where did Verizon get the 'OK' to drop my data package off my plan? Who authorized that?
After calling Verizon and trying to find out the problem, the gentleman told me that when I activated on old phone while I was waiting on my new Droid to arrive, my data package was dropped off and I "should" have been told about that. When I reactiviated my new Droid, I "should" have called and had them restart my data package. I was not aware that when you activate an old phone that data plan is taken off your plan. In all my years of having cell phones, I never make two years with one phone. I have always, at one point, had to turn on an old phone, and my data package has NEVER changed. Why would I have my data package dropped and why would I have to call Verizon to have it restarted. I would never know to do that unless I was TOLD that my data packaged HAD to be re-added when I recieved my new phone, but I was never told of that.
All of that is beside the point, the point is, Verizon was never given the authorization to change my plan. Never. My bill was taken care of and readjusted, and I am thankful for that. It does not change the fact it is always a hassle with Verizon Customer Service and I am always the one having to PROVE that I am not at fault, or that I was NEVER told of certian things. EVERY TIME I HAVE CALLED CUSTOMER SERVICE, I AM TOLD "I'M SORRY, THEY SHOULD HAVE TOLD YOU THAT."
"they should" does not help my bill with the extra armount of charges.

Problems with dropped calls and no reception on Samsung Continuum

My mother and I both purchased a Samsung Continuum in late March 2011, and have experienced the same problems with the phone. The device drops at least 2-3 calls per day, often on the same conversation; we have not found that location or time of day makes a difference. The phone freezes up frequently, even if no apps are running in the background. We lose our 3G network reception frequently, and cannot access our texts, emails, or the internet. The screen saver kicks in even when we are actively dialing a number, or typing in a text message. The overall performance of the phone is also poor, and it is quite slow much of the time.
We have raised this issue several times with a representative at one of the Verizon stores, but he states that he can find no problem with the phone, and that these issues may not be covered under our insurance plan. None of my friends with non-Samsung phones are having the same problems with phone reception and performance. I am aggravated enough with these issues that I am considering reactivating my old Blackberry, which worked like a charm.
I am not upset that my phone has not been updated to Android 2.2. I just want the phone to perform as stated, and not fail at its primary function: making and receiving phone calls. I am not certain if these problems originate with the phone, Verizon, or Samsung, nor do I care. I just want to resolve these issues as soon as possible, or I will have to look at other alternatives.
Thank you.

If this doesn't work...now what??? I have a useless $400 plus piece of unreliable junk. My Motorola Razor was ions more reliable than this phone...very, very sad but true.
What carrier were you using with the Razor? AT&T? Same area?
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

Problems with ColdFusion Extensions and CF/Flex Application Wizard

Similar Messages

Maybe you are looking for