Problems with Excel and Word 2013 saving to OneDrive for Business

I've had OneDrive for Business running for about a month without any problems. On Thursday I noticed I wasn't able to save an Excel 2013 spreadsheet to my OneDrive account. When I try to save it a box comes up that it's communicating with OneDrive then I
get an error that the file wasn't able to upload due to permissions. I've tried to resync and repair OneDrive, but that didn't help. I also repaired Office 2013.
If I create a txt file in Notepad I can save immediately to the same folder on OneDrive. If I create a new spreadsheet and hit the browse button to save it takes forever for OneDrive to access the folder then I get an upload error saying it cannot save and
to make a copy.
Should I re-install Office 2013?

Hi,
Are you able to new a Word/Excel file directly in that OneDrive folder?
Please first try to remove and re-add the OneDrive service in Office and then verify result.
You might also want to install any available updates, make sure your system/Office is up to date and then try again.
Regards,
Ethan Hua
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Similar Messages

Working with EXCEL and WORD files on a Mac Pro

Hello,
I have a lot of EXCEL and WORD files and the compatibility with NUMBERS and PAGES is not really satisfying. Is there a EXCEL and WORD app which runs without surprises on a Mac Pro?

Welcome to Apple Support Communities
Microsoft sells its own Microsoft Office version for OS X > http://www.microsoft.com/mac Microsoft Office for Mac will be the application that will give you less headaches when using Office documents, so I recommend it.
Another application you should consider is LibreOffice, which is free > http://www.libreoffice.org

Excel and Word 2013 stop responding after "Save As"

Hello-
After the last set of updates (7/8/2014), my Word and Excel "stopped responding" when I attempted to "Save As" any document or spreadsheet that I was working on. I tried multiple suggestions to no avail and finally ran Microsoft's
uninstaller for Office 2013. I then installed all updates EXCEPT any of the 7/8/2014 updates. Then I started installing those one by one. The one that causes the failure for me is KB2880987.
Has anyone else run into this issue?
Thanks,
Jaylene

Don't worry, the installation might have just corrupted your local profile files when it failed, I'm sure it would work on another computer. For me, Office works fine I just want that one update off my update list/mind.

Pdf creation problem in Excel and Word

I have Windows 7 Pro and Office 2010. Up until a month ago, when I created a pdf in Excel or word, it would automatically open up so I can review. I then downloaded the trial version of Acrobat® XI Pro. When the trial version ended, I uninstalled the Acrobat® XI Pro. I still have the standard Adobe Acrobat Reader installed. Now when I create a pdf it no longer automatically opens, and I always need to review it before sending it out. How do I fix this?

Do you the latest Office update 14.4.5?

Problem with printing and scanning after updating to Mavericks for my Photosmart C7180

After updating my macbook pro (mid 2009) to Mavericks, I have found that I can only scan to a jpeg2000 and cannot scan as a tiff or jpeg or anyother format. I have followed instructions on troubleshooting and have not been able to make anything work ie scanning from preview etc. I have now uninstalled all the HP software and tried to load it again but software update will not recognise that I do not have the software for my printer. What do I do now?

Hello Cyd23, welcome to the forums!
I understand you're having issues with scanning since you upgraded to Mavericks. I have looked into this concern for you and found that there is no downloadable driver with the full feature software (scanning software) included for the Photosmart C7180 and Mavericks.
However, there are work around options for scanning that may help and work!
Please see this link for the other methods: OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
I hope that helps!
Have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Problem with VS2012 and Sharepoint 2013 Solution

Hello everyone
I've got a problem that's driving me crazy. I'm migrating a Sharepoint 2010/Visual Studio 2010 Solution to Sharepoint 2013/visual Studio 2012 with the developer tools.
My solution consists of 3 class libraries (common, data access layer and business logic) and a Sharepoint 2013 project containing the features, and the webparts using the output of the class libraries. The references inside projects are set through "Add
Reference -> Solution -> Projects". I want a wsp-file containing the sharepoint artifacts and the assemblies from my class libraries. (those are added through the package explorer -> Advanced). If i use Build/Rebuild on the Solution it compiles fine,
as it should.
If i use the "deploy" or "publish" command on visual studio to create a solution package, the build fails with the message:
"The type or namespace name 'whatever' does not exist in the namespace 'Xyz.Project'' (are you missing an assembly reference?)
I can't find out what's wrong. if i deploy anything manually everything works fine. building/rebuilding my whole solution works fine. Everything is set to .NET 4.5. It seems to be that "wsp-package"-building process that has a problem.
Any hint/idea would be welcome.
Greetings
Carlos

To fix this, simply remove the reference to your "common" code library and re-add it as an assembly reference (as opposed to a project reference). I.e. Select 'Add reference...' and then browse to
the 'bin' folder of your "common" library.
I did in fact consider that. But it can hardly considered good style and you lose a lot of benefits. The biggest of all being that you can never be sure you are working with latest versions of your common class libraries.
While unloading/reloading worked in VS 2012 things are worse in VS 2013. In VS 2013 the solution doesn't package anymore at all. No matter what you do. Cleaning, rebuilding, reloading... I tried all of that in vain.
Edit: And while I'm at it... great job in marking a totally irrelevant posting as answer. Another trigger happy content moderator. I really wonder if their financial goals are tied to the number of postings they mark as answered.
Solution: See here: http://ddkonline.blogspot.de/2013/10/build-and-packagepublish-behaviour.html
The key thing is - your common project assemblies need to be added in a particular order (in the order your assemblies need to be built)

Anyone having problems with LR and Kaspersky 2013?

I'm running Win x64 with LR 4.1 and have been using Kaspersky Internet Security for the past two and a half years with no issues. The new version of Kaspersky recently came out (KIS2013) and I decided to upgrade, following all the guidelines on their forum for uninstalling the previous version first. Since I installed it on Saturday, I've had three blue screens on what was a previoulsy stable and reliable system, and the only thing that's changed on that system in this time is KIS. Each time the blue screen has returned a different bug code and has occured at random; the only consistent thing has been that LR has been running. I've checked out the usual suspects (memory check, update graphics driver), but the PC crashed again regardless. Of course, this isn't an LR issue specifically, but I'm just wondering if any other LR users have tried out KIS2013, and if they have, have they had similar problems?
I've just today uninstalled KIS and am currently running Microsoft Security Essentials instead. So far - and it's early days - it seems to be fine with LR running in conjunction. It appears to me (as a relatively PC savvy user, but certainly no software engineer and with minimal experience of troubleshooting system crashes) that KIS has a conflict with LR that causes significant stability issues. I'll be posting on the Kaspersky forum as well.
Based on my experiences, if you are running KIS then stick with the 2012 version. That caused me zero problems.
M

iPhoto forum where the experts are.

How do you make OS X Lion work with excel and word? I have these programs that I use for work?

I up loaded Lion...now windows word and excle dont work. I use these for work. How do i get them to work with Lion.

jbeustis wrote:
I up loaded Lion...now windows word and excle dont work. I use these for work. How do i get them to work with Lion.
Upadte to the current version of Office, 2011

Problem with Acrobat and word

Hi eveybody.
I am going to become mad with acrobat 9.0.0 Pro Extended e world 97.
(win xp pro service pack 3)
When I go to produce the acrobat document, the background become wrong, as the images added.
I selected print backgroung both in acrobat and world.
Who can give me an hand?
Thanks in advance
(screenshot added)
p.s Sorry for my bad english :-)

I am guessing it is a transparency issue. I am sure that others will have a better answer, but this might get you going.

Not enough memory or disk space in excel and word office 365

I have windows 8.1 and am having huge issues with excel and word in office 365.
When i download a document i am unable to open as message reads cannot open as not enough memory or disk space.
I have plenty of disk space and memory however have searched this and the following has been answered BUT I CANNOT UNDERSTAND This and need HELP with step by step instructions on how to do please;
To resolve the issue, refer to the methods below:
Go to this key on Registry Editor (Run | Regedit)HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User
Shell Folders
change key Cache to something like C:\Windows\Temp
You might also right click on the file with file explorer, choose Properties, then General tab and click on the Unblock button.
Some of our customers found it sometimes a permission problem.
cmd => dcomcnfg
Click >Component services >Computes >My Computer>Dcom config> and select micro soft Excel Application>
Right Click on microsoft Excel Application>Properties>Give Asp.net Permissions
Select Identity table >Select interactive user >select ok
However i do not understand a word of the above or how to do PLEASE HELP this is extremly frustrating as i am doing correspondence and I am unable to access any files.
Thanks

Hi,
You must have read this thread:
http://social.technet.microsoft.com/Forums/en-US/9773a7c4-29a8-48ff-9d16-e1ca4c478610/excel-2013-microsoft-excel-can-not-open-or-save-anymore-documents-because-there-is-not-enough?forum=officesetupdeploy
To detail the steps, please do as I describe:
Important
This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the
registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry,
http://windows.microsoft.com/en-US/windows7/Back-up-the-registry
To open the Registry Editor, please press Win + R, type regedit in the blank box, press
Enter. / Or we can type regedit.exe in Windows 8.1 Search, you'll find it easily.
Now the Registry Editor is open.
Then we see the pane on left, expand the following path:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
Then we can see a list on right, find Cache, right click on it, click
Modify..., under Value data, change the value to something like
C:\Windows\Temp, click OK.
Exit Registry Editor.
As for "You might also right click on the file with file explorer, choose Properties, then General tab and click on the Unblock button." Just find the file, right click on it, choose
Properties, under General tab, if you see a
Unblock button, click on it.
"Some of our customers found it sometimes a permission problem.
cmd => dcomcnfg" Do the following:
Press Win + R, type in cmd in the blank box, press
Enter.
In the new black-background window, type in dcomcnfg, press
Enter.
Then the Component Services window will pop up, on the left pane, expand
Component services -> Computes ->
My Computer -> Dcom config -> and select
Microsoft Excel Application, right click on it -> Properties ->
Identity tab -> Select The interactive user ->
OK.
I hope I've explained the steps clearly.
Good luck.
Regards,
Melon Chen
TechNet Community Support

When updating to 8.5.1. from 8.5., the excel and word toolbox vi's are gone

I updated from 8.5 to 8.5.1 and now my vi's with excel and word sub vi's do not work. I re-installed the toolbox for Microsoft office and this did not help.
How can I get the excel and word sub vi's to work?
Mark
metzler CLAD

I tried uninstalling lv 8.5.1. through the control panel, add/remove programs. I only uninstalled lv 8.5.1. and not all the other programs. Once re-installed, the functions palette still shows no word or excel sub vi's.
Did you uninstall all of the labview programs and toolbox, or just labview 8.5.1?
Thanks,
Mark
metzler CLAD

Need help on conterting jsp to Excel and word

Hello every body,
we are developing one small web application ,in that one my jsp page displaying data in tablurform , option box with Excel and word document and sumbit button.Suppose when select Excel and click submit the table data should be displayed inside Excel sheet. If i select word and click submit data should be displayed inside word document.Could u plz help me how we have to do this..?
u have any reference document plz forward to [email protected]
Thanks & regards,
Anil.

http://poi.apache.org/
Excel => http://poi.apache.org/hssf/index.html

Issues when trying to setup alternate sync location of OneDrive for Business / SharePoint 2013 Libraries

Hello,
I have an issue that prevents me from choosing the alternate location of sync'ed OneDrive for Business folders. I'm trying to setup an alternate location for synchronization, using the guidelines found in the Office support web site.
The option to replace the default sync location appears the first time a SharePoint 2013 Library or OneDrive for Business is setup for synchronization.
Here would be a link to a snapshot (since my account has not been verified): /Forums/getfile/443247
At this point, the Library or personal OneDrive folder syncs correctly and the files are stored in the alternate choosen location.
However, on when trying to setup an additionnal Library for synchronization, the alternate sync location has not been saved and reverts to the default sync location. Furthermore, the option to replace the default sync location does no longer appear
on the dialog box.
Here would be a link to a snapshot (since my account has not been verified): /Forums/getfile/443249
I have tried by first sync'ing a SharePoint 2013 Library (instead of the personal OneDrive for Business folder) with the same result. Meaning that the first SharePoint 2013 Library correctly sync's in the alternate location of my choosing. However,
any subsequent attempts to sync either a SharePoint 2013 Library or the OneDrive for Business folder results in them being sync'ed to the original default location in a folder under the user's profile directory.
I'm using Office Professional Plus 2013 (64bits). The version of Groove.exe is 15.0.4605.1000 (12th March 2014 - 13 383 360 bytes).
Is there something I'm missing ?
Thanks for any help on this issue.

Hi SpringComp,
You can change the root path for libraries you sync to your computer, though you can do this only if you’re not currently syncing any libraries. If you’re already syncing at least one library and you want to change the path, you must first
stop syncing all libraries. Then, the first time you run the OneDrive for Business wizard to sync a library to your computer, you’ll see an option to change the location.
More information, please refer to the link:
http://office.microsoft.com/en-001/support/change-the-location-where-you-sync-sharepoint-libraries-on-your-computer-HA102893480.aspx
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

After hours of back-up, downloading and uploading...I am now updated with all the latest Mac software. However, I no longer have access to Excel and Word. Is there a way I can access my documents in either of those? Help, please.

After hours of back-up, downloading and uploading...I am now updated with all the latest Mac software. However, I no longer have access to Excel and Word. Is there a way I can access my documents in either of those? Help, please.

If you have older versions of excel and word that previously ran under the Rosetta emulator (allows PowerPC code to run on Intel system), they will no longer work with Lion.
You can use the Apple programs Pages and Numbers to access the files. They can be bought and downloaded from the App store. NeoOffice is available at http://www.neooffice.org/neojava/en/index.php which has Lion support. OpenOffice doesn't talk to Lion support, it's at http://www.openoffice.org/

Right click with mouse in Word 2013 does not give the list with translate and synonyms etc

since i upgraded to windows 8.1 right click on words in word 2013 does not open the regular list where you can tap on synonyms and translate.
it does work if i touch the screen.
i moved to mouse mode but it does not help
can anyone help...
i am starting to hate windows 8.1 and word 2013 because of this feature not working

Hi
I have tested in my computer and it worked well.
Normally when we type a wrong spelling, right clicking the word does not give a list with translate and synonyms.
Check to make sure your spelling is right.
if the issue persists, Start Word in safe mode to check the issue:Hold "Ctrl" key and click into the program.
It is also recommended that you do a repair for your Office suites in
Control panel>Program and features>Office>Change>Repair
Thanks
Tylor Wang
TechNet Community Support

Problems with Excel and Word 2013 saving to OneDrive for Business

Similar Messages

Maybe you are looking for