Problems with iWay JAM MF Connector on Weblogic 10gR3

Has anyone come across this error? I'm getting this on start up and can't seem to get around it.
<Error> <JAM Management> <BEA-000000> <Unable to load JAM configuration: Attribute: stackType invalid vtm28>
Gateway bootstrap startup failed on AdminServer java.lang.RuntimeException: Attribute: stackType invalid vtm28
Here's a snippet of the important part of the jamconfig.xml file
<CRM name="JAM" listenAddress="xxx.xxx.xxx.xxx" listenPort="xxxx" logicalUnit="JM2ASCM1" stackType="vtm28" nextGatewayId="1"/>
<JAMGateway name="JAMLZ" WLSServer="AdminServer" stopWLSOnExit="false" deployed="true">
<CRMRef name="JAM"/>
</JAMGateway>
<CICSRegion name="CICSF" logicalUnit="FMSZ" deployed="true"/>
<CRMLink name="FMSF" modeName="SMSNA100" maxSessions="4" minSessions="2" security="LOCAL" deployed="true">
<CRMRef name="JAM" />
<CICSRegionRef name="CICSF" />
</CRMLink>

Similar Messages

Problems with navigation when deploy application on WebLogic 10.3

Hi! I have problems with navigation when I deploy my application on Weblogic server 10.3. In my application I have two pages. One page where I can see the records. In this page I have button Create with action to secound jspx page. When I press this button then the first form (where I could see all records) is empty - the create operation worked, but navigation to second page not. Navigation rules is in adf task flow. In default server all works correct. Where is the problem?
Maybe when I deploy my application I need specialy deploy adf task flow or somewhere write something? If so, then can you explain me where? Any suggestions what to do.
Best regards!

I have in log:
2009.26.3 20:12:52 oracle.adfinternal.controller.faces.lifecycle.JSFLifecycleImp
l setLifecycleContextBuilder
WARNING: ADFc: Replacing the ADF Page Lifecycle implementation with 'oracle.adfi
nternal.controller.application.model.JSFDataBindingLifecycleContextBuilder'.
2009.26.3 20:12:52 oracle.adfinternal.controller.util.model.AdfmInterface initia
lize
INFO: ADFc: BindingContext is present, using ADFm APIs for DataControlFrames.
2009.26.3 20:12:52 oracle.adfinternal.controller.metadata.provider.MdsMetadataRe
sourceProvider <init>
INFO: ADFc: Controller caching of MDS metadata resources ENABLED.
2009.26.3 20:12:52 oracle.adf.controller.internal.metadata.MetadataService$Boots
trap add
INFO: ADFc: Loading bootstrap metadata from '/WEB-INF/adfc-config.xml'.
2009.26.3 20:12:54 oracle.adf.share.security.providers.jps.CSFCredentialStore fe
tchCredential
WARNING: Unable to locate the credential for key AUGI in D:\bea\user_projects\do
mains\base_domain\config\oracle.
2009.26.3 20:12:54 oracle.adf.share.jndi.ReferenceStoreHelper throwPartialResult
Exception
WARNING: Incomplete connection information
Edited by: Debuger on Mar 26, 2009 11:18 AM

Problem with fake jammed paper

I have a problem with my printer hp officejet 4630, it says there is jammed paper , but it is not jammed paper, and it still appering that message , I cannot print nothing, what is the problem?

Hello @joseyoshua,
Welcome to the HP Support Forums!
I understand that you seem to be getting a false Paper Jam error on your HP Officejet 4630 e-All-in-One Printer. I would like to assist you today with resolving this error. Now, a couple of different things can cause Paper Jam errors. There may still be a tiny piece of ripped paper or debris within the paper path that is causing the error, that you may have missed when you checked for jams. There may also be a defect with the paper sensor that may have been caused by a paper jam or carriage jam issue. Can I please have you follow the steps below to resolve this issue.
To start troubleshooting can I please have you click here. When the support document opens please run through Solution one, and Solution two. This includes any sub-steps under the two listed Solutions. If you have already looked inside the printer for jams, please just review the instructions under Solution one to ensure that no areas have been missed. Pay close attention to Paper Path Cover Door area.
Please respond to this post with the result of your troubleshooting. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Problem with front panel USB connector

Motherboard: MS-6750
I have a problem with my front panel USB connector JUSB2 not working.
I have checked the connection to be sure that it is oriented correctly.
I also made sure that it was enabled in the BIOS.
Still no luck. There is not any voltage on this either.
I see a jumper or pin labeled JGS1 just below the JDLED1...do not know what this is and cannot find it in the manual.
Any ideas on what this is and how I might trouble shoot the USB connector?

Which 6570 MB do you have, if its the K7N2 Delta 2 Platinum and came with the Dled bracket try plugging that into that port on the mainboard and see if those usb ports work as it could be the usb hub itself not working on the front. Hope this helps Dok

Problems with db query in activity in OBPM 10GR3

I wrote the following query in the activity itself
INSERT INTO TEMP_TABLE(NAME)
VALUES (testName);
It worked fine in DEV environment.
But when I deployed the project to QA and connected to the db in QA, it gave me an error:-
---A SQL Exception has occured in Cause f SQL Excepion: java.sql.SQLException: [BEA][Oracle JDBC Driver][Oracle]ORA-00942: table or view does not exist SQLState: 42S02 SQLErrorCode: 942 Message: [BEA][Oracle JDBC Driver][Oracle]ORA-00942: table or view does not exist
Why is that?
I understand that if I use DynamicSQL.executeQuery(sentence : sqlQuery, implname : implname);
it will work even if I change to connect from DEV To QA
But if we use the query directly in the activity itself , it does not work in QA.
Why is that?
how do I fix that to work in all environments?

Hi Dan,
I did not understand you.
I do the following:-
1) Create an external resource with a generic name say TEMP_DB and give all the Oracle db credentials, username, password, SID, schema and port. This is connected.
2) Then I Catalogue this in my Catalog using Catalogue Components-->SQL.
3) I select the "Use an existing configuration" option and select my newly created external resource which I named as "TEMP_DB"
4) When I hit next, it fetches me the db information
5) In that I select the db schema name and introspect the tables in it.
6) These tables are then entered into my catalog
7) Finally I use a direct BPM query instead of using Fuego.Sql.DynamicSQL.executeQuery() in my activity itself.
So the problem is that, even if I change the External Resources config giving it a generic name, I have selected the same DEV schema name. The schema is directly introspected which I directly use in my query in my activity
as oppsed to using DynamicSQL.executeQuery() where I don't specify the schema name . I just specify the External generic resource name which is TEMP_DB.
But I don't want to use DyanamicSQL.executeQuery(). So how do I resolve this problem with using it?

Problem with sendRedirect using relative URL in WebLogic 5.1 with SP7 & 8

I patched to SP 7 (and also 8), and the request.sendRedirect() with relative
          URL failed. The browser simply displayed "404 - Page not found".
          This problem only happens in a cluster environment attached to a web server.
          SP6 or earlier does not have such problem.
          I noticed that the latest SP always formats the URL and returns it as a full
          absolute URL to the browser. The problem is it uses the Weblogic Server host
          URL where the request is processed (not the Web Server host URL) which is
          not visible to the internet.
          Is it possibly a bug in SP?


I patched to SP 7 (and also 8), and the request.sendRedirect() with relative
          URL failed. The browser simply displayed "404 - Page not found".
          This problem only happens in a cluster environment attached to a web server.
          SP6 or earlier does not have such problem.
          I noticed that the latest SP always formats the URL and returns it as a full
          absolute URL to the browser. The problem is it uses the Weblogic Server host
          URL where the request is processed (not the Web Server host URL) which is
          not visible to the internet.
          Is it possibly a bug in SP?

Problem with ELSTER and Business Connector

Hi all,
it's not really a XI Problem but I have no idea, where I could post it anyway.
For LSTA/LSTB with Elster we installed the Business Connector.
To check the settings we execute the report RPUTX7D0.
The following error message appears:
Testreport zum Überprüfen der RFC-Verbindungen zum Business Connector
Lohnsteueranmeldung
Kommunikation - Business Connector
Test HR_DE_B2A_ELSTER_GZIP   => /ELSTER/LSTB/GZIP
Test HR_DE_B2A_ELSTER_UNGZIP => /ELSTER/LSTB/UNGZIP
Teststring für GZIP und UNGZIP: AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
Message: java.lang.StackOverflowError
SY-SUBRC: 1
Kommunikationsfehler beim Aufruf des
Funktionsbausteins HR_DE_B2A_ELSTER_GZIP.
Ueberprüfen Sie die RFC-Verbindung HR_DE_ELSTER
und/oder die Funktion des Business Connectors.
Message: java.lang.StackOverflowError
SY-SUBRC: 1
Kommunikationsfehler beim Aufruf des
Funktionsbausteins HR_DE_B2A_ELSTER_UNGZIP.
Ueberprüfen Sie die RFC-Verbindung HR_DE_ELSTER
und/oder die Funktion des Business Connectors.
Does anybody knows why the java.lang.StackOverflowError appears?
Any ideas what I could do to solve the problem?
Many Thanks,
Mathias

Here is the right error message. Seems as if it loops..... But the question is why.
2007-07-13 13:32:03 CEST java.lang.StackOverflowError
     at java.lang.reflect.Method.invoke(Native Method)
     at com.wm.data.IDataUtil.clone(IDataUtil.java:405)
     at com.wm.lang.flow.FlowSequence.invoke(FlowSequence.java:197)
     at com.wm.lang.flow.FlowRoot.invoke(FlowRoot.java:199)
     at com.wm.lang.flow.FlowState.invokeNode(FlowState.java:559)
     at com.wm.lang.flow.FlowState.step(FlowState.java:430)
     at com.wm.lang.flow.FlowState.invoke(FlowState.java:400)
     at com.wm.app.b2b.server.FlowSvcImpl.baseInvoke(FlowSvcImpl.java:1786)
     at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:709)
     at com.wm.app.b2b.server.BaseService.invoke(BaseService.java:140)
     at com.wm.lang.flow.FlowInvoke.invoke(FlowInvoke.java:292)
     at com.wm.lang.flow.FlowState.invokeNode(FlowState.java:559)
     at com.wm.lang.flow.FlowState.step(FlowState.java:430)
     at com.wm.lang.flow.FlowState.invoke(FlowState.java:400)
     at com.wm.app.b2b.server.FlowSvcImpl.baseInvoke(FlowSvcImpl.java:1786)
     at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:709)
     at com.wm.app.b2b.server.BaseService.invoke(BaseService.java:140)
     at com.wm.lang.flow.FlowInvoke.invoke(FlowInvoke.java:292)
     at com.wm.lang.flow.FlowState.invokeNode(FlowState.java:559)
     at com.wm.lang.flow.FlowState.step(FlowState.java:430)
     at com.wm.lang.flow.FlowState.invoke(FlowState.java:400)
     at com.wm.app.b2b.server.FlowSvcImpl.baseInvoke(FlowSvcImpl.java:1786)
     at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:709)
     at com.wm.app.b2b.server.BaseService.invoke(BaseService.java:140)
     at com.wm.lang.flow.FlowInvoke.invoke(FlowInvoke.java:292)
     at com.wm.lang.flow.FlowState.invokeNode(FlowState.java:559)
     at com.wm.lang.flow.FlowState.step(FlowState.java:430)
     at com.wm.lang.flow.FlowState.invoke(FlowState.java:400)
     at com.wm.app.b2b.server.FlowSvcImpl.baseInvoke(FlowSvcImpl.java:1786)
     at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:709)
     at com.wm.app.b2b.server.BaseService.invoke(BaseService.java:140)
     at com.wm.lang.flow.FlowInvoke.invoke(FlowInvoke.java:292)
     at com.wm.lang.flow.FlowState.invokeNode(FlowState.java:559)
     at com.wm.lang.flow.FlowState.step(FlowState.java:430)
     at com.wm.lang.flow.FlowState.invoke(FlowState.java:400)
     at com.wm.app.b2b.server.FlowSvcImpl.baseInvoke(FlowSvcImpl.java:1786)
     at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:709)
     at com.wm.app.b2b.server.BaseService.invoke(BaseService.java:140)
     at com.wm.lang.flow.FlowInvoke.invoke(FlowInvoke.java:292)
     at com.wm.lang.flow.FlowState.invokeNode(FlowState.java:559)
     at com.wm.lang.flow.FlowState.step(FlowState.java:430)
     at com.wm.lang.flow.FlowState.invoke(FlowState.java:400)

Performance problems with MyFaces 1.1.3 in Weblogic 8.1SP3

Hi,
 we developed a JSF based application using Apache myFaces 1.1.3 and Tomcat 5.0.27 as development container. The application works very well with excellent performance in tomcat. But when deployed to weblogic 8.1SP3 the performance gets really really poor. Just to give you an example: A pure navigation task between two JSP pages (without any additional functionality) takes more than 6 seconds - in tomcat this took a split second.
 Does anyone can figure out where this discrepancy may come from?
 Thanks for a hint ...
 Cheers,
 Chris

Hi,
 see text below for some fragments of the BEA support answer to this problem:
 "Weblogic version 6.x and 7.x are not supporting JSF's. [...] The present Weblogic version 8.1 supports, but not all service pack. Only SP4 supports that too in the Weblogic WORKSHOP only, since this is Struts oriented Framework. [...] Weblogic 9.0 supports JSF(Java Server Faces)".
 So this problem has nothing to do with the implementation of myFaces ...
 Cheers,
 Chris

Problem with AUX IN/Dock Connector

Hi,and sorry for my bad english!
I've just bought a Classic iPod 80GB and I want to connect it to my car,which has AUX IN.
I always connected my "old" iPod 4°Gen using the phones output but i read that the audio signal taken from the dock is more clean and useful for this situation (car,hifi,ecc..)
So i bought this
http://snipurl.com/1qmyi
I can charge my iPod and connect it to AUX IN.
But tonight i noticed something..Some song with this cannot be heard correctly (in my case i heard the lead giutar very very far)..Otherwise,if I connect it to the Aux In using the Phones outuput everything is perfect.
How can this be possible?
Is this a firmware problem of the ipod?
Thanks..

Hi,and sorry for my bad english!
I've just bought a Classic iPod 80GB and I want to connect it to my car,which has AUX IN.
I always connected my "old" iPod 4°Gen using the phones output but i read that the audio signal taken from the dock is more clean and useful for this situation (car,hifi,ecc..)
So i bought this
http://snipurl.com/1qmyi
I can charge my iPod and connect it to AUX IN.
But tonight i noticed something..Some song with this cannot be heard correctly (in my case i heard the lead giutar very very far)..Otherwise,if I connect it to the Aux In using the Phones outuput everything is perfect.
How can this be possible?
Is this a firmware problem of the ipod?
Thanks..

Problem with importing XSDs and deploying to Weblogic 9.2

Hi Guys,
I am trying to deploy a simple web service wiith request response xsds packaged as an EAR to Weblogic 9.2
Instead of making the request/response inline in the wsdl,I am importing it
<message name="RequiredResponse">
<part name="parameters" element="tns:requiredServiceResponse"/>
</message>
tns:http:://some.com/some
And tns points to a valid namespace and I have made sure the xsd and wsdl are in the same folder and there are no import issues.
When I try to start this application in Weblogic I get this error
java.lang.IllegalArgumentException: no local element named 'parameters' on global element e=requiredServiceResponse@:http:://some.com/some
This has no problem when deployed to Oracle App Server 10g.
Thanks

I have the same issue, albeit I am using WLS 10.... anyone have an answer?

I have Problem with my iphone 5 connector

I can no longer plug the lithning cable in my iphone 5, it seems that the connector is bottled with a piece of black plastic.
Thank you for your help.

If you look at the bottom of the iPhone 5, you should see a metal "ring" which is where the Lightning connector inserts. On my black iPhone, the connector is a slightly different color than the metal at the bottom of the iPhone. The while cable has nothing black on it at all (other than my cable wrap I use to keep it "tidy"). I know that my wife had managed to get something (paper/cardboard shreds) in her connector on her iPhone and that was preventign the cable from fully inserting, but we got those removed with a fine pair of tweezers. The only other thing I csn think of which might be causing your issue is that your case might not be fitted properly for insertign the cable while in the case. I have seen this with some of the adapters, like the third party micro-USB to Lightning, or the 30-Pin Dock to Lightning adapters. I don't have this issue with my iPhone in the iFrogz case, or my wife's in her Speck case.

MSI P35 NEO3 problem with led, power etc. connectors! Plz help

Problem was just stupid. Man which sold me this mobo placed coolers on phase units and i didnt know that. I thought its something fabricly placed.
Now i have some other stupid problem and that is how to connect led, power switch, hdd and etc., ive thought that I have done everything in the right way, but when I start up my machine after 1/10 s which shows something on the screen everyhing goes black.
I'm connecting chassis connectors for the first time so what can be mistake?
Can someone send me a picture of a correctly placed connectors so i could copy that, and give me some guidelines how to do that?
Also do i need to connect both ends of 6 pin power connector (2x4 pin) or I can use only one)?
Thanks!

Mh, can you take a picture and post it here?

Problem with Apache James installation

Hi guys,
Any help will be greatly appreciated.
I'm trying to use Apache James 2.2.0 for my email server.
Following Apache's instructions:
-I ran bin/run.bat with JAVA_HOME set
-It ran successfully and created apps/james
-I stopped the server to edit the SAR-INF/config.xml
Even if I added a blank space to it, I am not able to run run.bat again because it throws an exception: Deployment Exception: Error building configuration from file.
So why is it that run.bat runs with the default configurations but any changes to config.xml results in a crash.
Thanks a bunch,
chilamania

Try avoiding installing james in a path which contains a space.
e.g. "C:\Program Files\*"
see the link below for further explanation:
http://issues.apache.org/jira/browse/JAMES-307

Problem with iWay Servlet Application Explorer

Hello Everyone,
I have installed the iWay SWIFT adapter. Now I am trying to configure the iWay Servlet Application Explorer. I have deployed the iwae.ear after making necessary changes as suggested. But the problem is when I am trying to open the Servlet Application Explorer at http://<XI host:port>/iwae/index.html, the page opens but it is not showing the available adapters and in the right pane it is giving following error:
Unable to Retrieve Information
The underlying connection was closed: Unable to connect to the remote server. Check your configuration or try to connect later
Has anyone faced any similar problem earlier, if so how to solve this issue.
I have used the following values for service line in the web.xml inside the iwae.war.
<service displayName="localhost" url="http://localhost:50100/"/>
<service displayName="jca" provider="com.ibi.adapter.jspae.CustomJCAIWAEConnection" url="c:\program files\iway55#base" />
(Where 50100 is the j2EE port on our XI server.)
Any tip regarding this is highly appreciated.
Thanks
Abinash

Hi,
Check out for the parameter to be set in config tool.
Check these link.
http://egeneration.bea.com/iwaydocs/iway55/5.5.001/iw55_cics.pdf
SWIFT
file to swift
file to swift file scenario
http://download.sap.com/download.epd?context=876CA1622A3C697FF1D756D2FE10D2727D9FE0E9740911DBA785883225B46DF4F27EA184832BFBF3FDABDAAECF26794BC249BB326209F958
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/34a1e590-0201-0010-2c82-9b6229cf4a41
http://martin.hinner.info/bankconvert/swift_mt940_942.pdf - MT 940
http://www.bph.pl/res/docs/korp/DBE/MC/Aktualnosci_instrukcje/file_format_description_rft_mt101_v20050411.pdf - MT 101
iway's SWIFT adapter http://www.iwaysoftware.com/products/adapters/swift.html
SWIFT adapter available from iWay..
check... you can get documentation about conversion agent from service marketplace..
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
/people/bla.suranyi/blog/2006/09/29/conversion-agent--handling-edi-termination-characters
/people/bla.suranyi/blog/2006/09/29/conversion-agent--handling-edi-termination-characters
Regards
Aashish Sinha
PS : reward points if helpful

Problem with logic pro 7 & jam pack

Hello,
first sorry me for my english....but I need help
I'v a big problem with my jam pack.
1/
when I want to hear some loop with the navigator loop, the sound is deformed like with a tremolo and a reverb...
when I take a midi loop and I put it on my arrangement the sounds is ok
It makes the research of loop very difficult(it does'nt sound right).
2/
I've the same problem in the navigator loop with the audio loop.
But when I put it in my arrangement the sound isn't ok (deformed, tremolo...)
On the other hand the deformation disappears when I put a faster tempo
(around 100 bpm)
Precision; my arrangement is at 50 bpm
Thank you so much for your help
g5 Mac OS X (10.4.9)

hi, you are play the loop back too slow.
there's a limit to how far a loop may be slowed down.
apple loops are generally played back via the last audio channel available, whether you are using in your song or not.
check this channel to see if it has effects inserted or is using the bus sends. if so, switch these off to hear your loops properly.
DR9

Problems with iWay JAM MF Connector on Weblogic 10gR3

Similar Messages

Maybe you are looking for