Problems with Lightroom 5.2 and Photoshop CS5. Please help!

I recently bought Lightroom 5; and now edit my raws initially in Lightroom. Once edited I export them as JPGs. Then I usually also open them as the JPGs in Photoshop CS5. Once opened there is noticeably more grain in each photo which is creating havoc with my processing. Much appreciated if anybody can help. I have updated Lightroom to 5.2, and have re-installed Photoshop CS5, with no sucess.

The read me file from Adobe indicate that LR 5.2 has "preliminary" support for the Olympus EM-1 raw files.
I would make sure you keep your original raw files so they can be converted when the support is finalized. i.e. I would not convert to dng on import if that is your normal workflow.

Similar Messages

  • Lightroom 4.3 and Photoshop CS5 Crashing

    For several months, I have been trying to troubleshoot random blue-screen crashes when (and only when) using Lightroom 4.3 and Photoshop CS5 in Windows 7 64-bit.  The Windows stop error code is always 124 (hardware related).  The crash dump files have not provided much help. They just keep referring to "ntoskrnl.exe" and "hal.dll" as possible causes, but that doesn't help isolate specific hardware.  Without going into all the excrutiating details of what I have done to try to find a hardware problem, I am now 99% sure that hardware is NOT causing the crashes.  I recently ran "Who Crashed, Professional Edition 4.01" to analyze the crash dump files.  It identified "cameraraw.dll" and "tliadjust50.dll" (a file installed byTopaz Labs plug-ins Adjust 4, DeNoise 5, and Fusion Express 2) as possible causes of the crashes.  I would like to refresh "cameraraw.dll" to determine if it is in fact causing the problem.  My question is how to replace my existing "cameraraw.dll" file with a new one.  Can I just download a new "cameraraw.dll" file (from where?) and replace my existing "cameraraw.dll"?  Or, do I have to reinstall LR4 and/or CS5 to refresh "cameraraw.dll"?  I really hope I don't have to do that, because I think I would probably have to also reinstall all the third-party plug-ins and extensions I have installed to work with  LR4 and CS5, and that would be a major pain.  Does anyone have any suggestions/

    in each, click help>deactivate.
    then uninstall each.
    then install each on your new computer and activate using your serial number.

  • I'm having problems with CS2 (mainly illustrator and photoshop

    I'm having problems with CS2 (mainly illustrator and photoshop ) randomly shutting down while trying to save a file. Reformatted my laptop for fear of a virus and reloaded... I have gotten nowhere.
    Please Help!

    CS3 still had issues with the preferences becoming corrupt, so a possible workaround would be to reset the preferences.
    The file is called AIPrefs and is located under 'Documents and Settings/User/Application Data/Adobe/Adobe Illustrator CS3 Settings'. It is a hidden file. Delete it with Illustrator closed and when you launch the program again the file will be rebuilt.
    May be it is also sounds like you need more memory for your computer. If you can navigate to your computer's memory controls, and allow your operating system to use a portion of your hard disk drive (HDD) as RAM (maybe 2Gb or so) it may solve your issue.
    How is about: http://www.filerepairforum.com/forum/adobe/adobe-aa/illustrator/383-%E2%80%8Bcorrupted-fon ts-in-illustrator-file-urgent-help-need – resource has non-commercial specialty
    Third party software Illustrator Repair Kit also must be good solution
    It has free demo version at:- http://www.illustrator.repair/
    Hope this will be helpful.

  • Lightroom 4.3 and Photoshop CS5

    I have Lightroom 4.3 and Photoshop CS5 and want to remove both programs off the old computer and put them onto the new one is there a simple process please?

    in each, click help>deactivate.
    then uninstall each.
    then install each on your new computer and activate using your serial number.

  • Keywording problem in Lightroom 2.4 and Photoshop CS4

    I'm experiencing a problem with keywording in Lightroom 2.4 and Photoshop CS4. When i export a batch of photos that were keyworded in LR to the desk top then open a photo in PS I  find only one keyword when I look through the "file info" menu item.  Any ideas on how I might resolve this problem or what I may be doing wrong.
    Many thanks in advance.

    Make sure that you have the keywords setup so that they will export. You can check by right clicking on a keyword in the Keyword List panel and choosing Edit Keyword Tag. The dialog shown below should open and should see a checkmark against Include on Export and Export Containing Keywords. It's fairly easy to get this wrong when working with hierarchical keywords.
    Also, you can configure the Keywording panel so that it shows which keywords will be assigned when image is exported.

  • Problem with the Ray Tracer in Photoshop CS5

    I am very new to 3D modeling but I have been fallowing online tutorials to properly set-up and use the repousse tool with ray tracing in CS5. Last night I did a very intensive Font design with great success. Just about an hour ago I got an Adobe update for CS4 which I installed. Afterwards, the ray tracing in the repousse tool would not work. It would start and I would see the render grid pop up and then it would suddenly close.  I closed photoshop cs5 and reopened it and still the same problem. I then went into the performance settings and they were all set at the same settings as the previous night. I have no idea why this feature would suddenly stop working but the problem started after the adobe CS4 update. If someone can help me fix this I would be greatly appreciated.

    O.K tried reinstalling the whole suite, which was really annoying because the installer is such a load of...., well let's say it's not good. After deinstalling the reinstall failed and I had to run the cleanup tool (which produced some error's, how is that even possible) and do some other stuff suggested by the support. (It's really annoying that such an expensive programm has such a bad installer - CS3/4/5, always the same problem. At least the Adobe support is really good, so that helps a bit)
    After all I managed to reinstall the whole thing but this didn't help. Interesting enough it seem this has to do something with the file. If I create a simple text 3D-object it renders fine, so I guess I will start all over again and try if I get this working. This time I will save copies of every step, maybe I can figure out if this happens again.
    Another strange detail: the 3D-tools have an error, too on this file. If I move the object around in space they really jump on the slightest movement of the mouse.

  • Problems with Lightroom 5.2 and Olympus EM-1 RAW files?

    There have been reports on DPREVIEW of color problems using Lightroom 5.2 with RAW files from the Olympus OM-D EM-1 camera.  This causes  difficulty creating camera profiles, and creates a red shift in Images.  JPG images are unaffected.
    Anyone else seeing this?
    When may we look forward to LR 5.3, hopefully with a fix?
    Thanks............... Jack Winberg

    The read me file from Adobe indicate that LR 5.2 has "preliminary" support for the Olympus EM-1 raw files.
    I would make sure you keep your original raw files so they can be converted when the support is finalized. i.e. I would not convert to dng on import if that is your normal workflow.

  • Problem with your Xperia Z1 and Service Centre NOT Helpful

    Hi, 
    If you are from India and If you are an Xperia Z1 owner, and facing problems with your phone and the service centre and customer care totally unhelpful, Contact me. We are starting a self help forum very soon. 
    If you feel you have been cheated by Sony, Contact me. Let us sort it out.

    thereis already a self-help forum
    two, actually
    the one is this one
    the other is xda-developers, who probably will tell you to install cyanogenmod, go into recovery and delete dalvik cache three times

  • VERY BIG PROBLEMS WITH MY ZEN MICRO AND MEDIASOURCE! PLEASE PLEASE PLEASE HELP ME! PLEASE RESPOND

    Ok so a while back I had to give up my computer because it wasn't working.
    I thought that with my new computer I'd be able to transfer all of my music from my zen micro onto my new computer.
    Now my new computer is set up and I have installed creative mediasource and everything. I started to transfer my music from my zen onto my computer. My first 2 songs transfered successfully onto my computer. On the third song, I get this message:
    "Unable to read file, file may be in use, missing, or corrupted."
    I thought that maybe it was just that one song so I shrugged it off. But then it says the same thing for every single other song that i have! Only my first 2 songs out of my entire music library on my zen will transfer!!!
    Please i really need your help!!!
    And say that there is no hope in getting the rest of my songs to transfer and i have to download 094 songs from limewire? I'll surely be arrested for downloading that much! What should i do if i must download all of them?
    And one more problem with my zen: Some of my Jump Little Children songs are doing something weird. The song will be fine and then a clip from another song will play during it! And then press next and it just keeps playing all of my Jump songs in order even though my player is on shuffle and they do the same thing with the clip from another song interupting it. Whats going on?
    Most importantly though, i really need the questions answered about transfering from my zen to my computer because i'll be getting a new player soon. But this is my entire music library at stake!! PLEASE RESPOND!!!

    Might try this:? http://forums.creative.com/creativel...mp=true#M95059

  • Cannot Install Photoshop CS5 [Please Help] :(

    I have tried multiple times to install Photoshop CS5; it never works. I have tried using different Internet browsers, with and without the Akamai download application, and by clicking 'Run As Administrator'.
    The first time I tried to install Photoshop CS5, I used the Akamai downloader. Because the Akamai application is a writhing piece of garbage, I, of course, came out with an error. I then decided to download the files directly, without the Akamai downloader.
    After downloading the files directly, I was certain I would not have any issues. Wrong. Windows found a way to piss me off and gave me an error while extracting the files using PowerArchiver. The error stated that the following:
    "Error writing to a file.
    "Possible reasons: Disk full or no write permissions.
    "Please check if you have permissions to write to this folder.
    "Vista users:
    "In Microsoft Vista, writing to certain folders is not allowed (i.e. C:\Program Files). You will need to start PowerArchiver as Administrator. If you are extracting files you can use drag and drop from PowerArchiver main interface to extract files to that error.
    "Error: 0."
    I have checked my hard drive space - I have enough space. I checked the write permissions of the folder I was extracting to - I am permitted to extract the files to that folder. I have tried 'Run As Administrator' in PowerArchiver, and still no success.
    Could someone please assist me because I want to use try out Photoshop CS5 until it expires, and I can't do so if Windows wants to screw me over all the time.
    Some Things to Note...
    I am using Windows 7 64-Bit
    My computer can handle Photoshop CS5 (I checked)
    I have tried using Firefox and Google Chrome
    I have tried using the Akamai downloader and not using the Akamai downloader
    I have tried multiple fixes
    Windows is trash - I knew I should have bought a Mac...
    Thanks in advance I apologize for my sour attitude. I am just really fristrated at the moment.

    I feel your frustration, but take heart, Windows 7 is not trash.  You just need to become its master, and doing so requires different machinations and skills than with past versions.
    Let me also say that the greener grass on the Mac side is spray paint.  Trust me, I am involved with both.  Windows is more powerful - once you master it.
    First, if you're having problems you perceive as the system blocking you from getting what you want done, may I suggest that you may be a candidate for disabling User Account Control.  This is not a decision to be taken lightly - you should fully understand what UAC does for you and why you might want to disable it.
    In a nutshell, UAC makes everything you do, even though you may be logged-in with an account that's in the Administrators group, operate as though you are a lowly non-privileged user, and attempts to prompt you with an annoying dialog every time you try to do something that requires Administrator privileges.  I say "attempts" because it doesn't always happen when it needs to.
    I suggest reading further here:
    http://en.wikipedia.org/wiki/User_Account_Control
    If you become convinced you'd rather be an Administrator all the time, and are willing to take the risk that software you run from now on will be able to make arbitrary changes to your computer that require Administrator privileges, you can disable UAC; it's really quite simple to do.
    To do so, click Start and type UAC into the search box.  When Change User Account Control Settings comes up, click it.  Drag the slider to the bottom, confirm the dialog, then reboot your system.
    If you had any problems because of UAC, this will work around them.
    ALL THAT SAID...
    I suspect your problems run deeper than just UAC, and possibly disabling UAC won't help you with this specific problem.  You may have permissions issues...
    Did you upgrade your operating system from an earlier version?
    Was the disk originally formatted or the data put on the disk by another computer?
    -Noel

  • Problems with WRT54 V.7 (V7.00.4) :please help me!...

    Hi,
    I've just installed (two days ago) this device and it's so annoying.i've been with the chat support of linksys for hours and they could not help!
    These are the problems:
    My laptop "see" the router but u can't access the internet,although that when i try to check and connect the laptop via direct cable it's doing that with no problem.
    U can see that the signal is strong but u just cannot access the net.
    My second device:an asus a636 pocket pc can see the router only on a few times:most of the time i just can't "See" the router,and when it does see it sometime,u cannot surf the internet as well.
    (i must point out that i surf the internet using th pocket pc with no problem on many public places...)
    I tried to restart,reinstalling the firmware (v7.00.4) a few times,and configured the router again,but it didn't solve anything.
    To add to that:the setup cd/wizard didn't work at all and started the debugger of the windows (Win2000),and even when u try to download the setup from linksys site,it's doing the same and starting the debugger,so i installed the 7.00.4 firmware using the tftp.exe program.
    What else can i do so this device can work properly??it's so frustrating!!!
    Please help whoever u are.
    Thanks in advance!!!

    Hi… Try changing the Wireless Channel on this router and check the Wireless Security mode. Make sure it is supported by your OS / wireless adapter. Select proper security key and try to connect to this wireless network. Once connected, check the IP address on the PC and try to ping to Router and DNS servers. Revert back with your findings.

  • Problems with AIM on Blackberry 7100i...Please help

    I got the 7100i off ebay with AIM preinstalled...it didn't work.  I then called nextel and they told me that there was a compatibility issue with the new AIM and this phone...so the guy gave me a web address to download the aim from.  It wasn't an address from AIM.com or Blackberry.com...and of course I didn't write it down...and now Nextel tells me that they have never had issues with AIM and this phone.  I can download and install AIM on the phone but when I put in my correct (and yes it is the correct one because I also tried putting the same password in my computer's AIM) it tells me that "service not enablesd for this handheld" but since it's third party software...Nextel can't help me.  Anyone know how to fix this?

    The best advice I can offer is to dump the AOL AIM client altogether, and use a third-party instant messaging application that supports AIM.
    For example, Adium X is a full featured IM client that supports AIM as well as many other IM protocols.
    It's very stable on Tiger, and it's light years ahead of the official AIM client from AOL.
    Try it out!

  • TS3899 How do I fix my email account on my iphone 5? I have been having problems with my hotmail on my phone. Please help.

    At first I deleted my account as suggested by the support article and instaled my hotmail account again.
    Now I don't have access to my email anymore.
    Please help.

    No, hotmail is having problems:
    http://bostinno.streetwise.co/2013/08/15/hotmail-outage-hotmail-is-down-for-user s-still-photos/
    http://www.engadget.com/2013/08/14/outlook-outage/
    http://www.infoworld.com/d/applications/microsofts-skydrive-outlookcom-are-down- some-users-224940
    http://mashable.com/2013/08/14/outlook-down/
    http://techcrunch.com/2013/08/14/microsoft-acknowledges-outlook-com-messenger-sk ydrive-outages/

  • HT4623 Problem between iPhone 4, PC and iTunes.  Please help!!

    I inserted the plugs between my iPhone 4 and my PC.  And then, the iTunes connected automatically.  However, I dont know why the update function cannot stop at my iTunes and my mobile cannot run again automatically.  Please help.  Tks

    It could be caused by a weak phone connection.

  • Problem with the 3d part of photoshop CS5

    Dear everybody,
    im trying to follow a PS tutorial on the web, which is quite good i think (http://psd.tutsplus.com/tutorials/3d/create-a-shiny-earth-with-photoshop-3d-layers/comment -page-1/#comments) , but i run upon a problem which is next:
    At part 11, he tells me to: 'The weather seems to be too cloudy, because we can see the clouds that are on the other side through the transparent areas. Making the material one sided will fix that problem. Uncheck Two Sided.
    As you can see, he can uncheck that, because he is in CS4 i think. But in CS5 you can not uncheck that, although, i can't.
    Can someone please tell me/explain to me where i can uncheck that? Because i really can't find it.
    Thanks in advance.
    Jordi

    Hi Jordi,
    The option to light both sides of a material was removed in CS5. Having said that there are a few other ways to achieve the effect presented in the tutorial. The quickest way is to go to 3D> Render Settings... and check 'Remove Backfaces' in the Face Style options. What is happeing is the inside and outside surfaces are getting rendered, and since the cloud 3D layer is effectively 'in front' of the earth 3D layer you are seeing more than wanted. By removing the backface, you no longer render the inside surface.
    Another method is too merge the 3D layers so the clouds become a shell that covers the earth. Doing it this way you can also light and shade the earth with the clouds and not need to use the Layer Styles drop shadow method.
    Hopefully that makes sense.
    regards,
    steve

Maybe you are looking for