Problems with MS Office 2007 and Tiger Server

I have an Xserve hosting file services for Macs and PCs. There is a RAID attached to the Xserve storing user data and ACLs are enabled. Since installing Office 2007 on the PCs there's been the following problem which can be replicated -
When saving an Excel or Word document back in the 2007 suite to the Xserve, the user will be unable to save the document if it is saved back for the third time. In Excel 'Unable to save document is reported'. In Word the document can't be saved due to a network error or a file permision problem being reported.
The above is true for existing documents created in Excel or Word 2003, then saved in 2007 versions, which are on the Server, or for documents created using Excel or Word 2007.
Users are logging on with different user accounts. They first log on to a Windows domain hosted by a Small Business Server then a drive has been mapped on their PC, to give thme access to the Xserve.
As I said things were OK until Office 2007 was installed on the PCs.

I'm having the same issue, allowing guest access on the share did change the logs I'm getting in Samba. Earlier on it was giving errors on the inability of guest access to the share.
============================================================
[2008/01/29 13:05:47, 0] /SourceCache/samba/samba-100.5/samba/source/lib/fault.c:fault_report(37)
INTERNAL ERROR: Signal 11 in pid 4204 (3.0.10)
Please read the appendix Bugs of the Samba HOWTO collection
[2008/01/29 13:05:47, 0] /SourceCache/samba/samba-100.5/samba/source/lib/fault.c:fault_report(39)
============================================================
I also noticed that the temporary file that is created by office is not removed after the attempt to safe the file. (something like: ~$filename).

Similar Messages

I have an HP-Pavilion Vista PC with MS Office 2007 and Service Pack 2. Each time I try to save a Wo

I have an HP-Pavilion Vista PC with MS Office 2007 and Service Pack 2. Each time I try to save a Word or Excel document I get the “Not Responding” message. The “Word is saving……” bar at the bottom does not show any progress. On clicking the document I get a faded version even when in Safe Mode. Somehow the document appears on the Desktop where I tried to save it. On trying to open the saved document, even as administrator, I get the following ”File in Use” message:
“The ….docx is locked for editing by….” and I am asked three questions including:
“Do you want to open a Read Only copy” yet on clicking “Yes” I am able to edit the same document.
On trying to save to a different location I get the message:
“Your autocorrect file MSO 1033.ad could not be saved. The file may be read only or you may not have permission to modify this file.”
The same message stating FILE12\1033\MSO.ACL MSO 1033ad recurs with new Excel documents.
How can I correct this problem?
PS
Worse still, the HP Advisor icon that appears on startup does not load successfully while showing the message: “Access to the path Hewlett-Packard\HD Advisor is denied”.
What can I do about it?
ZDK

I'm having the same issue, allowing guest access on the share did change the logs I'm getting in Samba. Earlier on it was giving errors on the inability of guest access to the share.
============================================================
[2008/01/29 13:05:47, 0] /SourceCache/samba/samba-100.5/samba/source/lib/fault.c:fault_report(37)
INTERNAL ERROR: Signal 11 in pid 4204 (3.0.10)
Please read the appendix Bugs of the Samba HOWTO collection
[2008/01/29 13:05:47, 0] /SourceCache/samba/samba-100.5/samba/source/lib/fault.c:fault_report(39)
============================================================
I also noticed that the temporary file that is created by office is not removed after the attempt to safe the file. (something like: ~$filename).

Problems with Microsoft Office 2008 and 2011

Hiya,
I am running Mountain Lion on my Macbook Pro and I'm having ongoing problems with the Office system. I'm doing a PhD so I use footnotes all the time and in Word 2011, the autosave function makes the footnotes disappear from the bottom of the page, but I'm not comfortbale working wihtout autosave running. I deleted Office 2011 and put Office 2008 back on my machine. However, since I re-installed Office 2008, the whole OSX seems to have slowed down.
Could Office 2008 cause my whole system to get sluggish? Is there anything that I can do about it?
I am also wondering if there is there another solution to my original Office 2011 problem with footnotes that doesn;t involve disabling autosave? Has anyone else has similar problems with footnotes? I just wiped my whole system and re-installed all the programmes, so I am surprised to still be having these same problems with Office!
Thank you for any help and advice!

You should try asking your Office for Mac question in the Office for Mac forums where the Office for Mac gurus hang out.http://answers.microsoft.com/en-us/mac?auth=1

Is there a problem with Allen Bradley PLC and web server export options

It says this object will not run in a client version. I have a development version and a client version. Maybe I'm not understanding the error message. Lookout 5.0

The process you upload to a web server needs to be a poor client process. It means you have to create a client process without the PLC driver and a server process with the PLC driver. You will just upload the client process and the server process will stay on the Lookout Server machine.
There are several links on the support site those explain the prefered client-server architecture to choose for a Lookout application.
Building a Sample Server-Client System in Lookout
Converting a Lookout Server Process Into a Client
://ae.natinst.com/operations/ae/public.nsf/fca7838c4500dc10862567a100753500/4c13547ceb6354a886256b80...
Hope this is a good starting point for your Lookout application design.
Roland

Problem with Java Studio Creator and Tomcat Server

Hi Gays ,
I have problem:
here is the error from tomcat 5
com.sun.rave.web.ui.appbase.ApplicationException: org.apache.jasper.JasperException: java.lang.RuntimeException: java.sql.SQLException: statement handle not executed: getMetaData
com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.destroy(ViewHandlerImpl.java: 601)
com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.renderView(ViewHandlerImpl.ja va:316)
com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87 )
com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:221)
com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
javax.faces.webapp.FacesServlet.service(FacesServlet.java:198)
com.sun.rave.web.ui.util.UploadFilter.doFilter(UploadFilter.java:194)
if i develop application on my pc ( java studio creator with sun apps bundlled) is working perfectly,
but i migrated application to Tomcat Server ( Database the same - Oracle 10 g)
i can't show value ( as text) from datasoruce ( is in SessionBean1)
(Category-.>Subcat->Items->details( url from items table[items.jsp])
this is a working url "/faces/testpage.jsp?auk_id=31 "
( working with sun apps server , but not on Tomcat 5)
below prerender method in details.java and fragment of details.jsp
public void prerender() {
try {
String idauk = (getExternalContext().getRequestParameterMap().get("auk_id").toString());
System.out.println("wartosc auk_id " + idauk);
if (idauk != null) {
getSessionBean1().getDetailsRowSet().setObject(1,idauk);
getSessionBean1().getDetailsDataProvider().refresh();
details.jsp
xml version="1.0" encoding="UTF-8"?>
<jsp:root version="1.2" xmlns:f="http://java.sun.com/jsf/core" xmlns:h="http://java.sun.com/jsf/html" xmlns:jsp="http://java.sun.com/JSP/Page" xmlns:ui="http://www.sun.com/web/ui">
<jsp:directive.page contentType="text/html;charset=UTF-8" pageEncoding="UTF-8"/>
<f:view>
<ui:page binding="#{testpage.page1}" id="page1">
<ui:html binding="#{testpage.html1}" id="html1">
<ui:head binding="#{testpage.head1}" id="head1">
<ui:link binding="#{testpage.link1}" id="link1" url="/resources/stylesheet.css"/>
</ui:head>
<ui:body binding="#{testpage.body1}" id="body1" style="-rave-layout: grid">
<ui:form binding="#{testpage.form1}" id="form1">
<ui:staticText binding="#{testpage.staticText1}" id="staticText1" style="position: absolute; left: 120px; top: 96px" text="#{SessionBean1.testDataProvider.value['Name']}"/>
</ui:form>
</ui:body>
</ui:html>
</ui:page>
</f:view>
</jsp:root>
Help People ! Any Ideas I'm stuck, why is working with Sun Servet but not with Tomcat and only just thing ?
Thanks in advance for helping me to resolve the night problem :)

Hi I found solution, i puted on the page a table -component (with brand new automaticly created dataprovider) , then i set properties visible= false for table, and now I can bind statictext with database field and deploy on tomcat server .
But i think it is not a elegant solution in page source i habe noused-code.
Have Any another Ideas. HELP PEOPLE !!!!
Mariuszek: I use Creator.because right now I can see result of my job and i can qickly change ideas ,
I tried with JDeveleper but i did'nt find this functionality (wich version do you prefered ?) , unfortunately i have to deploy my application on Tomcat. This is my study project, and i make this to become a Master of Techinal Univeristy ;), Deadline time is 30 th September :(
greetings

Unity 5 with MS Exchange 2007 and Windows Server 2003 Ent w/ SP2

Hello,
We have Unity 5 with Exchange 2007 SP1 on Windows 2003 SP1 Enterprise server. We want to upgrade Exchange to SP2 or SP3 but I could not find enough information, may not have looked in right places.
Does anyone have Unity with Exchange 2007 with SP2 or SP3? has anyone experienced issues with such upgrade?
Thanks,
Paresh.

Paresh,
Here's what you need:
Recommended Service Packs—Message Store
Revised October 25, 2010
•Exchange 2010 Service Pack 1
•Exchange 2007 Service Pack 3
For support information, refer to the "Support Policy for Microsoft Service Packs and Updates" section of Supported Hardware and Software, and Support Policies for Cisco Unity Release 5.x at http://www.cisco.com/en/US/products/sw/voicesw/ps2237/prod_installation_guides_list.html.
I pulled this straight from a Cisco document so you could be sure that you are moving to the latest recommended SP for Exchange which is SP3. I have clients running this SP without issue.
Hailey
Please rate helpful posts!

Problem with Acroabt X Pro and Terminal Server 2008r2

I have deployed Acrobat x Pro on a 2008 R2 Terminal Server. Everything was going great but a while back I had to reapir the OS and re-install Acrobat and a few other Programs because of a minor virus. I have confirmed everything is running fine and that the virsu is gone. However, since then users prefernces and settings have not loaded up when they open up acrobat. The pfx file is still there for all users it is simply not loading along with the rest of thier prefernces. Has anybody seen this before and does anybody have a fix for it?
Message was edited by: Skywalker32

Hi Skywalker32,
I think Sabian is on the right track, well other than his nomenclature being incorrect. The way Acrobat/Reader works is the list of digital ID files are store in the registry like in the example above (except you'd be looking for 10.0 in the path and either Adobe Acrobat for your Acrobat users or Acrobat Reader for the Reader users).
So with that in mind, are you using a GPO to push the individual PFX files and are you using the Adobe Installation Wizard to customize the application (Acrobat or Reader) installs? I'm just trying to get a handle on what's in play here. Also, I thought that maybe the digital ID file location could be set as a lockable preference in the HKLM portion of the registry, but they can't so if that's what you are trying to do via the installation wizard that could be a problem (not that I think you are, I'm just taking a shot in the dark here).
Thanks,
Steve

Problems with 802.1x,ACS and Windows Server 2000

Hi,
My components: ACS 3.3 running on a Server with Windows 2000 Server SP4 , 2950 Catalyst (AAA-Client) ,
Laptop with Windows XP SP2 (802.1x Client)
I have everything configured according to Cisco documentation, but I am getting one error in the ACS's log.( Failed Attempts active.csv)
Authen-Failure-Code : EAP-TLS or PEAP authentication failed during SSL handshake
I have a valide certificate on my Radius(ACS) server and about machine authentication I have a valide certificate on my laptop. (I have installed this certificate before i started to login at the 802.1x port of the switch)
Does anyone have any idea what the problem is?
Here is the Config of the Catalyst 2950 if that will help:
version 12.1
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
hostname ACS-Client1
aaa new-model
aaa authentication dot1x default group radius
enable secret xxxx
username xxxx privilege xxx password xxx
ip subnet-zero
ip ssh time-out 120
ip ssh authentication-retries 3
spanning-tree mode pvst
no spanning-tree optimize bpdu transmission
spanning-tree extend system-id
dot1x system-auth-control
interface FastEthernet0/13
switchport mode access
dot1x port-control auto
dot1x timeout quiet-period 3
dot1x timeout reauth-period 1
dot1x reauthentication
interface GigabitEthernet0/2
interface Vlan1
ip address 10.10.3.253 255.255.255.0
no ip route-cache
ip default-gateway 10.10.3.254
ip http server
radius-server host 10.10.3.1 auth-port 1812 acct-port 1813
radius-server retransmit 3
radius-server key radius
line con 0
password xxx
line vty 0 4
password xxx
line vty 5 15
password xxx
end

Yes we get to solve this problem. Because it is a only a test senario, we installed everything new, win2000 server SP4,the certificate service and the winXP on the client.
The config of the switch is ok, we set the reauth-period and quiet-period to default.
Then we test the whole configuration with the IAS-Radius (MS). After this we install the ACS, following this document:(Certificates were already installed)
http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_configuration_example09186a00801df0ea.shtml
Attention, we used the AEGIS Client not the XP Client!

Strange problem with SQLPLUS when client and server on the same box

Hi,
I have the problem with SQLPLUS when clinet and server on the same machine.
With client and server on the same machine i am running the command
sqlplus -l username/password@connect_identifier as SYSDBA.
With this command, even if you pass in wrong username or wrong password or both as wrong you can able to connect to database and execute queries.
Once Connect_identifier is correct and trying to log in as SYSDBA ,sqlplus will log in to DB with any username and password.
How to get rid of this behaviour. Is there any way to do this.
I am running this command by creating a process in C#
Edited by: user11000236 on Jun 16, 2009 10:31 AM

user11000236 wrote:
Thanks for the info.
How does Oracle/SQLPLUS allows any username or password to log in to DB with SYSDBA Privillages? What is the concept behind this.?
This is explainted in the above mentioned link:
Operating system authentication takes precedence over password file authentication. If you meet the requirements for operating system authentication, then even if you use a password file, you will be authenticated by operating system authentication.

I recently upgraded to Lion, and immediately started having consistent problems with Open Office 12 (would hang, and need a Force quit to recover). Has anybody else seen these problems? Any solutions other than going back to Snow Leopard? (I did).

I recently upgraded to Lion, and immediately started having consistent problems with Open Office 12 (would hang, and need a Force quit to recover). Has anybody else seen these problems? Any solutions other than going back to Snow Leopard? (I did). But I'd like to use iCloud with iPad.

Hi Pete. The repair of disk permissions can help resolve any application crashing or misbehaving.
As for Lion and the two camps, I think that is a reasonable observation. In my office we have about a dozen Mac's and about one third of those Mac's had problems after updating from 10.6 to 10.7. The main problem for these Mac's was a loss of wifi stability. But for the other two-thirds, Lion was a smooth transition.
Personally, my Lion experience was fine. But I did get a new i7 MacBook Pro with Lion already installed and only had to migrate my user data from a 10.6.8 TM backup.
So I think that is a key for Lion's operational success. A clean install of Lion on a new Mac would not cause too many operational issues. But an installation, or more correctly, an update to Lion from SL increased the chances of failure for some users - especially when old software & plugins resided on the Mac. And I would say that they were the people that you saw at the Apple store.
As for the "latest release of Lion fixed my problems" statement, my experience with these and other forums is that people mostly only go there to complain about the problems they are having. If they are having no problems then they either keep it to themselves or they try to help the users who are experiencing trouble...

SAP and XL Reporter are both compatible with Microsoft Office 2007.??????

Please confirm that SAP and XL Reporter are both compatible with Microsoft Office 2007.

Darpal,
SAP Business one supports Microsoft office starting with 2005 A patch 15 and up. You can see the specifics on supported platforms at this link
[https://service.sap.com/smb/sbo/platforms]
Regards,
Lucas

Parnet/child permission problem on a 10.4 OSX Tiger server

Hello All,
I desperately need some help from someone with experience on an OSX 10.44 Tiger server. I've been teaching web design in a Windows lab for five years but this year I'm at a new school and working in a Mac lab with an OSX 10.44 Tiger server. With the help of my site tech we've overcome a handful of unusual errors/problems but we are both stuck on this one.
My class just started working in teams and using the remote folder features in Dreamweaver. The remote folder the students are using is a group folder on the lab’s OSX 10.44 Tiger server and this is where the problem arises. Students can create and share (get/put/check in/check out) folders but they can’t share files they create in Dreamweaver.
The shared folder on the server is set up to give the “group” read/write access. It works on folders but not on files. If a student creates a new folder all group members have read/write but if the same student creates a file the rest of the group only has read access and for some reason Dreamweaver will not let them get/check out the file. We added the group members to the ACL (access control list) as well and they still don’t have read/write access. Any ideas?
I’m basically having the problem described here - http://discussions.apple.com/thread.jspa?messageID=1468322
Thank you for you time and assistance. I could really use your help on this one!!!
Todd Benrud

I have the same problem with 10.5 client on 10.4.11 server, only with powerpoint, no prblem with word et excel (2004, not tested with Office 2008)
My server use only local account (no open dorectory), may be problem come from GUID problem

We are sorry, but we are unable to complete your request.•The Office 2007 Product Key provided is already associated with another user on this site. Please log in with the user information originally used with this Office 2007 Product Key.

Over the years I have had many ISP and email addresses - but now we have finally gone almost fully virtual...
I have a live login and MS ID 4 my SkyDrive account but I only use my MS touch with 8.1, SkyDrive and office 365 for mobility.
And I still like to backup to my own server!!!
What would be good is if I can put all the software licenses and product keys of the software and keep a record of my mac addresses for hardware and even static IP's in a file or a secure location within the MS online store.
That's where MS wants me to get my computing needs from in future and I will always be able to retrieve it in future but what about the $$$$$ I have spent on software, hardware and applications prior to now???
I know u guys love 2 collect data 4 marketing analysis,
4 example I have an old PC that is still running a server from last century - if you knew about it a simple script would allow you to offer upgrades or at least relevant MS products - UNLIKE the rubbish adds I just turn off or tune out
now...
Why cant I add products previous online email purchases into the 1 MS live ID account where I can keep it together? If you make that available I don't have to have separate steam accounts, EA game accounts, ASUS and adobe accounts etc
etc.
What has brought me 2 this is I was looking for my office pro 2007 disks to rebuild a HOME USE ONLY windows 7 laptop (NO touch screen so 8.1 is no benefit at all)
I HAVE 4 Genuine PRODUCT KEYs for Office 2007 BUT EVERY TIME I WENT TO DOWNLOAD the software - regardless of the key I used - I got the error message: We are sorry, but we are unable to complete your request.•The Office 2007 Product Key
provided is already associated with another user on this site. Please log in with the user information originally used with this Office 2007 Product Key.
That's crap - This is a clean brand spanker install of Win7 and there was nothing b4 I put the oem drivers from Toshiba back on.
I looked at dozens of support pages and forum blogs and tried for hours to get a copy to download - including incognito and other logins but because my default PC name is also my MS Windows live ID the same error was repeated.
I keep away from the non MS sites for these things and with good reason - there were heaps of similar users with the same issue or very close to it that had downloaded from a supposed MS copy from eValue or digital river etc and the next
thing was total corruption of the OS.
EVENTUALLY I found a LIVE MS chat on a support site in the US and she gave me a link to a slightly older version which will need updating and some reg edit changes but so far, so good.
The point is - what a crock !
I should be able to just keep all my software, drivers, updates, service packs, and versions that I have upgraded in the MS store.
If Microsoft aren't going to support XP or Office 2003 and eventually 2007, vista & Windows7 not far behind??? then that's still no excuse for them to put these restrictions and limits when I OWN my copy of the software!!
Unlike office 365 and SkyDrive space which is described in the T&C (that we all read before ticking that radial button to agree of course) as ONLY under a leased licence.
IF Microsoft can support AND develop software that supports SQL2000 Servers, why is it so hard to archive and keep the same info for everyone???

Over the years I have had many ISP and email addresses - but now we have finally gone almost fully virtual...
I have a live login and MS ID 4 my SkyDrive account but I only use my MS touch with 8.1, SkyDrive and office 365 for mobility.
And I still like to backup to my own server!!!
What would be good is if I can put all the software licenses and product keys of the software and keep a record of my mac addresses for hardware and even static IP's in a file or a secure location within the MS online store.
That's where MS wants me to get my computing needs from in future and I will always be able to retrieve it in future but what about the $$$$$ I have spent on software, hardware and applications prior to now???
I know u guys love 2 collect data 4 marketing analysis,
4 example I have an old PC that is still running a server from last century - if you knew about it a simple script would allow you to offer upgrades or at least relevant MS products - UNLIKE the rubbish adds I just turn off or tune out
now...
Why cant I add products previous online email purchases into the 1 MS live ID account where I can keep it together? If you make that available I don't have to have separate steam accounts, EA game accounts, ASUS and adobe accounts etc
etc.
What has brought me 2 this is I was looking for my office pro 2007 disks to rebuild a HOME USE ONLY windows 7 laptop (NO touch screen so 8.1 is no benefit at all)
I HAVE 4 Genuine PRODUCT KEYs for Office 2007 BUT EVERY TIME I WENT TO DOWNLOAD the software - regardless of the key I used - I got the error message: We are sorry, but we are unable to complete your request.•The Office 2007 Product Key
provided is already associated with another user on this site. Please log in with the user information originally used with this Office 2007 Product Key.
That's crap - This is a clean brand spanker install of Win7 and there was nothing b4 I put the oem drivers from Toshiba back on.
I looked at dozens of support pages and forum blogs and tried for hours to get a copy to download - including incognito and other logins but because my default PC name is also my MS Windows live ID the same error was repeated.
I keep away from the non MS sites for these things and with good reason - there were heaps of similar users with the same issue or very close to it that had downloaded from a supposed MS copy from eValue or digital river etc and the next
thing was total corruption of the OS.
EVENTUALLY I found a LIVE MS chat on a support site in the US and she gave me a link to a slightly older version which will need updating and some reg edit changes but so far, so good.
The point is - what a crock !
I should be able to just keep all my software, drivers, updates, service packs, and versions that I have upgraded in the MS store.
If Microsoft aren't going to support XP or Office 2003 and eventually 2007, vista & Windows7 not far behind??? then that's still no excuse for them to put these restrictions and limits when I OWN my copy of the software!!
Unlike office 365 and SkyDrive space which is described in the T&C (that we all read before ticking that radial button to agree of course) as ONLY under a leased licence.
IF Microsoft can support AND develop software that supports SQL2000 Servers, why is it so hard to archive and keep the same info for everyone???

Opening Office 2007 and 2010 documents in FDM as Custom documents

Hi Gurus, could you please help with this one.
I am trying to load Office 2007 and 2010 documents as custom documents in FDM. I can load the files successfully but when I try to open the loaded excel (xlsx) or word (docx) file, it opens up as a zip for me to save. I have added the docx, xlsx & pptx mime file types in the workspace without any luck as according to the following document *Incorrect format of MS Office 2007/2010 Files Downloaded from EPM Workspace [ID 1426071.1]*
Has anyone experienced this issue before:
Hyperion Version : 11.1.2.0
OS : MS Windows Server 2008 x64 SP1
Please help

Hello,
Can you please be more specific on exactly the steps you are taking?
Thank you,

OFFICE 2007 and Acrobat

I had reported on some issues of using OFFICE 2007 with Acrobat 7 and 8. I suspect there was a problem with AA9 also. Typically the result would be graphics with lines through them, at least when expanded. This would often appear that your graphic had been split into parts and pieced together in Acrobat. SP2 for OFFICE 2007 was released recently and I went back to test this issue with the new release. At this point it appears that everything is working great. This follow up is to suggest updates to BOTH OFFICE 2007 and Acrobat if you are having some problems. On this machine I am running VISTA business, OFFICE 2007 (SP2), and AA8. Bill

Thanks for the update.

Problems with MS Office 2007 and Tiger Server

Similar Messages

Maybe you are looking for