Problems with my home key...iPhone4

My home key seems to be "sticking". I have to press it several times for the home screen to come up. Very frustrating!!
Anyone else have this issue before and if you have, what remedied it??
Any help would be appreciated!!
Thanks!

Given that this thread dates back from almost 4 years ago, I doubt the OP will ever respond.

Similar Messages

HT201210 I have 4s facing hang problem after updating when i dicline the call the keypad geting locked ,touch stop working unable to unlock the phone .then what i can do i restart the phone with pressing home key & power key together then i am able to ace

I have 4s with 16GB storage capacity using IOS 7.1.2.
Facing hang problem after updating when i decline the call the keypad getting locked ,touch stop working unable to unlock the phone .
Then what i can do i restart the phone with pressing home key & power key together then i am able to access it.
Kindly resolve the issue as soon as possible
Ashish
[email protected]

Did you already try to set it up as a new device, as explained in this article?
iOS: How to back up your data and set up your device as a new device

Problem with the volume keys on my keyboard.

Hey everybody,
I have a problem with the volume keys on my keyboard. This started a couple days ago and I can't seem to figure out how to fix it. When I press the volume up or down buttons, the graphic appears on the screen as it normally would, but has no effect on the volume of the sound coming out of my speakers. Therefore, the only way to change the volume of music or whatever I am listening to is to use the volume control within the program/website itself (itunes, youtube, etc.) Even changing the volume on the volume icon at the menu bar on top of the screen does nothing. If anyone has an idea of how to go about solving this issue, I would greatly appreciate it. Thanks!

First look into the Preference > Sound > Outpur whether internal Speakers are choosen.
The only Preference to delete I can discover is com.apple.systempreferences.plist in your home Library folder. You can try to move it out to the desktop for example, not to loose all your settings. Restart and see whether the problem still persists. If you don't know how to do this here some Terminal (Applications > Utilities) commands. Enter them by copy and paste followed by <enter>
mv ~/Library/Preferences/com.apple.systempreferences.plist ~/Desktop/
restart
to get it back:
mv ~/Desktop/com.apple.systempreferences.plist ~/Library/Preferences/
confirm with "y" if you are asked to replace this file.
marek

Problem with push email key and adding mailbox

There seems to be a strange problem with the email key. I added my gmail account initially but then i deleted it. I don't see any mailbox in the email setup, but i still receive notification on recieving a new email. But when I press the push email key on the home screen to open my inbox, it takes me to the email setup. I tried adding a mailbox, but when i select "add mailbox" the screen becomes whitish and nothing happens.
I need to add my gmail account again. Please help me with this. Thanks!

1. Predictive text can only be enabled in alphanumeric keypad, but from testing the QuickOffice 6 on the 5800 (same app used for both phones), It cannot use predictive text. Its not in the typing options. Furthermore, if you would be using the qwerty keyboard on the mini, predictive text AFAIK cannot be used.
2. If using "vodaphone live" is giving an error in ALL applications, then it is not the fault of your phone but of the "vodaphone live" settings not being compatible to your phone. I assumed that it was only for email that it did not work. A similar case was one on T-mobile, wherein the T-mobile GPRS settings were incorrect which leads to the same issue as you do. The fix was to configure GPRS settings manually. You can also take it to vodaphone for them to configure it themselves.
3. As I said, unless we find out what is different from the files that can play and cannot I cannot help you. Its not like I can check the files themselves. You can try attaching two each of the working files and non working files here for some of us to test on our phones.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Keyboard problems with the "z" key

Hello everyone, I have problems with my "z" key.Recently, it is sufficent to touch the key without pressing to write the z.Unfortunately that happens also when I want to use the "t" or "u" next to it. I hope you can help me with this problem and can tell me what to do.Thanks in advance for your answers (and sorry for my bad english). greetings, bina90

Try to reset the device by pressing hold of the home and power button for 15-20 seconds and letting of when the Apple logo appears.

I have a problem with my home butten, its working but when i press it, it seems like something is stuck in it. like sand or something like that, and this is the second time it happens to me with 2 devices. what can i do?

Ok so first sorry for my english, Im not American.
2 months ago i bought a new Iphone 4 device from my phone company, after a month something happened to the home butten, when i pressed it it felt like something stuck in it.. like sand or dirt.. but the home butten worked perfectly. so i went to the phone company and they told me that it is a problem and they replaced it with a new one. but after a week my iphone fell and something happened to him so i sold it to someone i know, and with that money i bought a new one from privet store (unlike the last time, when i bought my iphone in a big phone company) and in the begining it felt new, i didnt had any problems, but 2 days ago when i woke up i pressed the butten and i noticed that the problem with the home butten is back.. and i dont know what to do.. i mean like its not a big deal or something, it just that when i buy something new, i excpet it to be new, and i want to ejnoy it while its new.
so i went to some guy i know and he told me that he will see what he can do, i paid him 130 Shekels (35$) and he told my that he replaced the butten with new one, but still it makes problems. it bothers me alot, because i pay almost 300 shekels per month (75$) and i expect from this device to be new.. and its killing me.
now, i cant go to the phone company because thats not their device, and i know what the people in the privet store will tell me.. that its my fault and bla bla bla.. so what can i do? i cant spend any more money on this..
its new.. for some reason this always happenes to me.. 3 devices, problems problems and problems..

You are right, but how could i send it to Apple? when the phone company first replaced my iphone they had in stock alots of iphones and they just sent mine back to Apple and gave me a new one, so all i did is to give them my phone, but now how could i sent it to Apple? and i cant send it by myself, and the store wont do that, its a lost for them.. so sending it to Apple wasnt an option from the begining.
and for the record, i dont think the store where i bought it is an authorized shop.. its just a store who boughts phone's from Apple in a low price and sells it in much more money..

I have a new hard drive and itunes and my computer (windows XP) no longer recognise my ipod. I also had the problem with the registry keys not being present but this has now been fixed. However i can no longer link my ipod up with itunes.

When I first tried itunes with my new hard drive there was the problem with the registry keys but something also flagged up about needing a signed driver. Is this anything to do with why Itunes and my computer no longer recognises when my ipod is linked up? Whatever i try under 'devices' my ipod is never available to sync up. If anyone can help I would be most grateful.

Thanks for your reply. Unfortunately this has not worked. I didn't have quicktime to begin with so I don't know if that makes a difference? After following the instructions, I get the "registry keys missing" problem appear again (which I've subsequently fixed again) and then when I connected the ipod I got the following message - 'Device driver software was not successfully installed'.
I've tried windows update but this doesn't do anything as '...the service is not running'.
Any suggestions?

Is anyone having a problem with the home button on a 6?

when I first got my iPhone 6, the home button was just like my other iPhones have been, my iPad, my sons iPhone 6, etc. when you pushed it, you can feel it move and you feel a little dull clck. Now the the home button on my iPhone 6 has no movement or click. It still functions, but I'm worried it is on its way to failing and if I wait to address the issue until it completely fails, then it will be out of warranty. Has anyone else experienced any problems with the home button?

If you believe that your device has a defect or malfunction, contact Apple now. This forum is not for taking polls. Contact Apple for support options.

Problem with Sting Primary Key

I have probleme with Sting Primary Key
when i create new row
System.out.println("is new:" + acct.getEntityState());
show 1 - this row is not new
why?

Hi,
I was unable to reproduce this behavior on OWM 10.1.0.8. It appears that you have a SR open for this issue, so I would suggest to continue with that process.
Regards,
Ben

Keyboard problem with T410 - Control Key

I have a problem with the control keys on the keyboard of T410.
I swapped my X200 keyboard over to T410 to check if it is software or hardware issues. With the X200 keyboard, the 'Ctrl' key is not working. With the T410 keyboard, 'e', 'd', 'c' and 'Ctrl' keys are not working.

Welcome to the forum!
I believe that X200 and T410 keyboards are mapped differently in BIOS.
Can you find another T410/T510 keyboard to test with?
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Bug: problems with the Escape key

Hi all,
In an attempt to get around real estate problems, I set my Dell 24" monitor in portrait mode. Logic 8 behaves as it should most of the time. However, there appears to be a problem with the Escape key. Most of the time, the Tools menu doesn't appear until you mouse out of the editing areas (eg into the menu area above the piano roll).
Clearly, Logic should just take its resolution and screen dimensions from the OS but there appears to be a problem in extreme portrait mode.
I'll report this but wanted to check that I'm not being an absolute and total plonker first. Anybody confirm this behaviour?
Thanks!
Pete

that sounds like a memory issue. have you tried reorganizing memory?

I have a wireless home phone connect device. Can call out on it when dial tone present, but most times cannot receive calls since purchase. Anyone else having a problem with their home connect device?

Have had Wireless Home Phone connect device refreshed and updated three times since I purchased it in September 2014. Last tech I worked with on it initialized an NRB to check the network. I checked the location of the tower, which is less than one mile up the hill with clear line of site. The device always has two antennas on it. The device is great when it does work, but most of the time it rings three times and then jumps to an automated message saying the person I am calling is not available. I've actually gone up there several times to try an fix the device, but always end up calling a Verizon tech who has me unplug it, pull the battery, and they do some network stuff and then we turn it back on and it works. After the last time on 10/02/14, I called it and got the message. I drove up there, 100 miles one way, and called it while standing in the room. Got the same message. I picked up the phone, heard a dial tone and dialed my phone and it range through. I hung that phone connected to the device and call it using my cell phone. It rang through. I went home and tried to call it the next day. Again it did not ring through and I got the message after three rings. I call another phone at the facility and had them call me on my mom's phone and it is fixed it again. The fix last for a day or two and then it's broken again, like it is today. If it's a network problem then it must be fairly close to the area because no matter what we do it fails again. So much for the 99.98% reliable. This thing is a piece of junk!
I purchased this device and put it on my plan so that my mother who we placed in a home at 96 years old would have a phone connection that she could use and wouldn't flip her out. My family and her family has not been able to faithfully connect with her at this critical time in her life. I am giving Verizon 10 more days to figure this out and then I am going to ask for a total refund not to mention how much time and travel I have put into this piece of junk. Either the home connect transceiver is broken or the network is broken. Why should I pay close to $70 for a service that has not worked more than several days out of 35 days? Also I have spent close to three hours on the phone with decent technical people, but it's my time. I should send Verizon a bill for every time I have gone up there to fix this device as well.
What perplexes me is that a regular cell phone would have sufficed, but because Verizon has to have a data connection that is not available on a regular phone and it was going to cost me $30/month, I decided to go with the home connect. Seemed like a nice solution for an older person who would have a hard time using a cell phone and keeping it charged. Plus after all the fees for getting it connected, it only cost $20/month. That would be a pretty good thing, IF IT WORKED....... The other thing that irks me is, why do I have to pay for a data connection when the cell phone Verizon originally provided can't even access the network. What ever happened to adding a phone line for $10 bucks\ month? All I wanted was a simple phone. She would not be able to use anything more complex and all she needs is a phone line period.
I have no problem paying for something that works and does what it should, but this is ridiculousness. The MTF on this device is somewhere around 1 to 2 days. Out of 365 days that's about a 96.5% failure rate....... Want my advice? Get ride of this device. It sucks and it's bad marketing.

jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport

Problem with Overwrite for Key Figures in ODS

A bit of a long explanation, but the problem is not so complicated...
We have an ODS containing contract line items. Each line item has a key figure "Total Contract Target" that is marked with update type "overwrite". We have modified the extractor that delivers data for this ODS so that the key figure is set to a value from the contract header. Since we don't want the key figure to be duplicated if there are multiple line items on the contract, the user exit for the extractor modifies only the first line item delivered.
For example, overall contract target value = 100. Contract has 3 line items. Contract target value for line item 1 is 100. Target value for line item 2 and 3 is 0.
This all works fine for initial loads, but there is a problem with the business content extractor for deltas. Whenever a single change is made, it delivers three sets of records. Continuing the example, we would receive 9 records for the contract (3 sets of 3 line items). Each of the three sets contains the same records. Only the first set has the correct contract target value. Since the ODS key figure is set to overwrite, our method of setting the total contract value in the first record doesn't work, because the extractor delivers duplicates so the duplicates overwrite the total with a 0.
Would setting the key figure for total contract value to update type "additive" solve this? (I'm concerned that additions would be made if there were only a change to characteristics and not the key figure). Thanks for your assistance.

Since we ought to post solutions to problems we discover for people who search this forum...
Solved this by modifying the customer exit for the extractor to set the key figure for the first contract line item encountered AND for all subsequent records with the same contract number / contract line item. Since the key figure in the ODS is set to overwrite, this makes sure that the last record written doesn't overwrite the key figure with 0.

Problems with the home button and generally freezing and shutting down often.

I have had this iPad 2 for around 3 months. After about a month I noticed that I was having to press the home button multiple times in order to get it to respond. It is now at a stage where I have to press it as many as 12-13 times. It's won't do this every time but all day for maybe 3 out of 5 days the other times it works fine.
As well as this I have also had issues with the Internet shutting down, Skype going crazy, picture albums popping up and then vanishing and so on. I'm not a computer wiz but I would describe it as going crazy two or three times a day.
While I was in a shopping centre about a week ago I asked about the problems in an apple store. The man was very helpful and asked if I had it on me so he could look at it. Unfortunately I didn't be he said I could bring it back whenever I like and it would take around 30 mins for someone to check it out. He said most Likley they would just give me a new one and that would be that. So of course happy that it could be sorted I went home. Today I decided to drive the nearly two hours down to Brisbane after having a nightmare time trying to Skype my friend this morrning. I hot to the store and asked if it could be looked at only to be told I need an appointment. I showed the card that I had been given and explained what I had being told. To cut a long story short he agreed that I had been told that but said the assistant clearly didn't know what he was on about and that I should come back. I offered to wait but dispute the shop being more full of staff watching movies and downloading songs then actual customers I was basically denied any sort of help and told to call the office to arrange an appointment.
Sorry to rant! I just thought that apple were renowned for good service? 5 hours later I'm home with the same issues.
If anyone has had similar problem with the device or even customer service I would be intrested.
Regards,

Me too! I had many bugs and returned my phone for a brand new one that did this the first time it was turned on at the Apple store. I was told it is a "software issue" and to "reboot the phone" if it continued to happen. It happens almost every time I try to use my phone. I've rebooted three times in a row some days. Nothing really seems to help. I keep waiting for an update.

Problem with Non-cumulative key figure.

Hi all,
I am facing the problem with the Non-cumulative Key Figure (Quantity). I have created and loaded data to the non-cumulative InfoCube. <b>This cube is defined by me to test the non-cumulative key figure.</b>
<b>In BEx query the non-cumulative key figure and cumulative key figure (Value change) both display same values, i.e. non-cumulative key figure contains the same values which we have loaded for cumulative value change. Non-cumulative key figure is not calculated based on associated cumulative key figure.</b>
I have done the following while defining the non-cumulative InfoCube:
1. Created a non-cumulative key figure which is associated with a cumulative key figure (value change).
2. Loaded data to non-cumulative InfoCube from flat file.
3. Compressed data in non-cumulative InfoCube after the load.
Note:
1. Validity area is determined by the system based on the minimum and maximum date in data.
2. Validity determining characteristic, 0CALDAY is the default characteristic selected by the system.
Is there any other settings to be done?
Please help me in resolving this issue.
Thanks and regards
Pruthvi R

Being a non-cumulative KF, total stock is automatically takes care of that.
Try putting all the restrictions which you have included for total receipts and total issues, for eg, restrict Total Stock with the movement types used in Receipts as well as Issues.
Check and revert.
Regards
Gajendra

Problems with my home key...iPhone4

Similar Messages

Maybe you are looking for