Problems with NForce Drivers on K8N Neo2

Whenever I install the Nvidia System Drivers, this causes my Windows XP SP2 (Newly Installed) to stop and reboot every time it loads. I'm running the latest BIOS version and all of my components are compatible with this board. If I try installing all of my other drivers and utilities, this doesn't occur. I tried installing a new Windows with Nvidia drivers off the web, and this occured again. Any way to fix?

There is no real performance boost with IDE drivers. No worries
Click update driver on the Nvidia Pata driver tab in properties.
Choose install from a specific location
Select dont choose , i will choose the driver
Then select standard dual channel pci controller which is the XP 1
Right click on the Nvidia Unified Driver or the MSI Drive and unzip it.
click on the SM Bus Controller Tab
as above and select the Inf file SMBus folder thats in the driver folder u just created
Other PCI Bridge Device - I think thats the Gart Folder routine as above
Have u installed the AMD Driver ?
AMD Athlon™ 64 Processor Driver for Windows XP, Version (exe) 1.1.0.14
try above & see where u are
luck

Similar Messages

E7-00 Problem with MTP drivers winXP service pack ...

I have E7-00 and i have a problem with MTP drivers not being installed and constatly showing device is not working properly in device manager.
I have win XP sp3, installed newest Nokia Ovi suite, and my computer is constatly trying to install MTP device drivers, and keeps complaining it cannot.
What should i do.
Cheers
Aleksandar

NOKIA IS NOT LISTENING TO THIS FAILURE, WHY DO WE HAVE THIS FORUM AT ALL WHEN NOBODY HELPS TO SOLVE THIS BUG

Notebook NC6400 HSTNN-C18C problem with grafic drivers

hello i have
NC6400 HSTNN-C18C and i have problem with graphic drivers.i have windows 7 proffesional i found some .but in install has failed installation .i have installed game Farming simulator 15 but i still must install latest graphic drivers.can you send me link where i download drivers thanks for help

Hi,
It's a good machine isn't it. Unfortunately no official support:
http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=1848274
Please try:
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/compaq-nc6400-drivers-for-windo...
Vista driver on the first link may help.
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Downgrade to win7 problem with audio drivers. beats audio software for win7?

I recently purchased the HP Envy 700-074 from best buy. it was necessary to downgrade to windows 7 for some work software and I would like proper audio drivers/software for windows 7. Right now it seems to be detecting as Nvidia audio driver but in this case it doesnt allow my front panel audio ports to output audio. I would also like to have beats working.
here are the hardware ID's associated with the card
HDAUDIO\FUNC_01&VEN_10DE&DEV_001C&SUBSYS_38423619&REV_1001
HDAUDIO\FUNC_01&VEN_10DE&DEV_001C&SUBSYS_38423619
and here's a quick screenshot of the driver that is associating with it right now..
http://gyazo.com/23499c19d5e2a21f81b9124ad822c07d.png
even those VEN_10DE's seem to associate to nvidia, but from HP the driver is meant to be IDT high definition audio? is something going on here?
the only change i've made to the computer is upgraded to an EVGA Nvidia GT 610 video card.,

Hi, Paul.
I have similar problem here.
I bought HP Envy 810-200nr and I hate W8, so I installed Windows Server 2008 R2, which is my favourite.
Then I solved numerous problems with chipset drivers and finally it all works, but Audio (IDT HD Audio) does not work.
Completely silent.
HDAUDIO\FUNC_01&VEN_111D&DEV_76C7&SUBSYS_103C2AF3&REV_1001
HDAUDIO\FUNC_01&VEN_111D&DEV_76C7&SUBSYS_103C2AF3
It looks okay, when playing audio - indicator blinks and shows level, volume can be adjusted, all parametrers - speakers, etc seems okay but silent!
I tried numerous drivers for W8 and W7 64 but they give "Incompatible version" error.
Can you advise me what to do? I really want WS2008R2 here, but this audio is weird..

MOVED: [Athlon64] AGP problem with my new MSI K8N NEO4-F

This topic has been moved to AMD64 nVidia Based board.
[Athlon64] AGP problem with my new MSI K8N NEO4-F

Yes I managed exactly that. I've been out of the computer building business for a while so I didn't know the graphics ports had changed.
I will invest in a graphic card as well, thanks for putting me on track
(The manual sais something about the port supporting 8x agp though? )

Problems with graphics drivers

Hello, I tried to install new drivers to my Ati 6770m (2gb) and there is a problem with almost every driver. For example the newest ati catalyst 14.5 beta. When the driver is installed, I can't switch to the resolution higher than 1024x768. Ati catalyst control centre is not installed or I there is an error message saying, that the driver is not installed correctly so the control centre can't open. Sometimes the system crashes to the blue screen and I have to reboot. I see this problem with various drivers. The only driver, that is working for me is Ati Catalyst 13.10 mobility beta. And with this driver there's a lot of graphic problems with GTA V. I see squares on all objects in distance when dx11 and AA is turned on. It is unplayable with this driver. Please help.

Hey @Tommy2220 ,
Thanks for the additional information. If you uninstall all that you have in the graphic drivers section of the Device manager, including the drivers that are present. Restart the Notebook, and download from here. You will only need AMD/Intel Switchable High-Definition (HD) Graphics Driver, it includes everything you will need.
You can also find them , here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system.
Hope this helps you out.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Problems with ATI drivers and gnome3?

I've tried to install gnome3 off of the gnome-unstable repo (sudo pacman -S gnome-unstable/gnome gnome-unstable/gdm I'm assuming that's the proper command). However, when GDM starts, my screen just flashes a cursor, goes blank, turns off, and repeats. Is there a problem with ATI drivers or is the package just not working at all right now?

I'm also having troubles with Catalyst and gnome3 (I'm ussually in i3 btw) just playing with it tho. Seems to detect my graphics as 'VESA: JUNIPER" which probably means it's using some sort of fallback, eitherway it's not very functional and messes with my X server a bit
EDIT: I can get into gnome, but there's a lot of flickering doing anything, should proabaly check for bugs on their tracker
EDIT2: https://bbs.archlinux.org/viewtopic.php … 89#p913189 <--- looks like that might be gaining some traction, something to watch
EDIT3: This bug and This Bug might be relevent, not too recent tho
And another one
so yeah..... ATI
Last edited by jmad980 (2011-04-07 07:37:21)

Has anyone else had problems with nForce ethernet drivers 3.13 and abo

Hi, I installed the previous version of the nForce unified drivers (2.03) and I have had problems with the latest version of the unified drivers also (2.41). These both have ethernet drivers "3.13 (WHQL) + TOT .NVU"
They seem to be the ethernet drivers fault. If I install one of the latest versions of the unified drivers, windows does not boot up, it just hangs at windows logo. ?(
If I remove the ethernet cards drivers using safe Mode, the system will boot up fine. I also have to re-install older versions of the ethernet drivers to get the system to boot.
I am using the K7N2 motherboard with onboard ethernet.
Any reasons/fixes would be great , cheers :]

falty mouse got a new one worked fin

Trouble with soundcard on msi k8n Neo2-fx

Hi!
I cant get my soundcard to work on my new motherboard. It is a m-audio audiophile delta 24/96 soundcard and the motherboard is a msi k8n Neo2-fx with a 3500+ processor. I have turned the internal soundcard off and also turned serial and com-ports off in bios to se if it was an irq problem, but it didnt help. It finds the soundcard, but when you have installed the driver, you get a code 10 "this device cannot start".
I know there is nothing wrong with the soundcard, it works perfectly on other computers I used.
I also tried to install another ethernet card, but that didnt work either. It didnt find the correct drivers for the device, although I know it is included in windows xp.
Is there something wrong with my pci-slots? Someone who has any tips?
/thanks in advance

There is a wide literature about the motherboards that best suits audio cards...
The M-audio cards seems to have a wide range of compitability but there are other issues that you should also concerne...
First, the IRQ conflicts.. try use other PCI slots and see what happens..
Most of the time in an ACPI pc the IRQ's of audio cards are messed with those of the display card...
Another problem has been reported when the display card is on PCI-E .....
I would try to unhook anything from the PCI's and switch from one to another 'till the problem is solved.. You may also need to download newer drivers from M-audio...
Good Luck and be Patient

Xp wont boot after bios update with dualcore amd 4200+ (k8n-neo2 platinum)

after flashing the bios (xp already installed on a sata stripe array)
xp wouldn't boot anymore ... ik had to flash the bios to be able to
use my amd x2 4200+ ...
so I tried to instal xp freshly on the sata raid ... hangs when it restarts to instal devices ... nothing would help diffrent drivers , basic bios settings , all pci cards removed and switched of everything i could in the bios to get a really basic setup
to instal ... no help whatsoever ...
now if i try to instal on a normal ide everything works like a breeze ... dual core , raid , everything ...
personaly I suspect either the windows instal stuff to be the problem with dualcore
but even more the nforce drivers since they have not been updated since june 2004 ...
can someone help me out please ???

Quote from: Budwise on 22-September-05, 13:08:34
try 1.B
If you check in his sig he is using 1b.
Quote from: Wonkanoby on 21-September-05, 15:36:21
there are newer nforce raid/ide drivers thasn that
http://www.nforcershq.com/forum/nforce4-driver-812-vt62037.html
His board is a NForce3. Here is the actually link for the drivers. http://www.nvidia.com/object/nforce_udp_winxp_5.10.html These were released September of 04 and it was stated
Quote from: NForce Release Notes
# Storage Driver Improvements:
* RAID Morphing
* Improved RAID Interface
* RAID spans both SATA and PATA devices
* RAID 0, 1, and 0+1
* Improved handling of various storage devices
Unfortunately I don't know how to get the correct files to a floppy to get windows to use them in the install process, but hopefully someone here does.
Good Luck
Jeremy

I have a problem when using Google Maps, at some point my computer blanks the window and says there's a problem with display drivers, and it has recovered,but it doesn't. Problem doesn't happen with Int Explorrer, so I do not believe it is the computer

When using google maps through Firefox, after asking for a place which is not the general North America section which routinely comes up, the firefox screen goes white, with a narrow banner at the top. A message appears in the lower right corner which says something about display drivers having had a problem, but now have recovered. However the display doesn't recover and the banner message is that Firefox is not responding. When I go to restart Firefox if I go to the restore point, the page is still frozen out.
I do not believe it is a problem with my computer because it doesn't happen if I use I.E. to go to google maps, then G-maps works normally.
This phenomenon did not happen before the latest upgrade to either Google or Firefox. I have used Fiefox for a number of years and also Google Maps on previous computers and on this one, and not had this before.
This is a relatively young computer (Asus EeSlate 121) less than a year old. I have used Firefox since I bought it and until recently had no problem with Google Maps.

I solved it myself, after the "note" which came back from FF/Mozilla just as I finished my message, commenting on what it was that my system had , I wnnt back to check my plug-ins etc. I downloaded the latest Java, BOTH 32bit AND 64 bit versions and latest Firefox.
Now all is working.
Thanks,
B.

Problems with Vista Drivers on Satellite M100 (PSMA1E)

Hello,
I got Problems with installing the Vista Driver for the Graphic Card and the Realtek Sound Card.
I downloaded the Drivers from the Toshiba-Support Side! The Realtek Driver couldnt be installed because of some missing file! The CCC wouldnt run correct after installation! I got Vista Buisness!
Greets, kalest

I fixed the Sound Problem for myself:
The Realtek Site offers drivers for the HD-Soundchip. I installed them and now i got HD Support on Vista!
The Problem with the Cata.Control Center still exists!
Greets, kalest

Qosmio X300-130: Problems with some drivers in windows 7 64 bit.

I have installed normally in my laptop windows 7 64 bit version. Before I continue with my main problems I am in the forum for answers and I found this [post |http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=232906&#232906] . How can I see if have a 32 or a 64 bit BIOS? If I have a 32 how can I make it a 64?
And now my problems:
1. I have installed a 64 bit sound drive for windows 7 of Realtek the version 6.0.1.6392 and it only recognizes the 2 speakers above the keyboard. How can I fix this?
2. My media controller manager is not responding with the drivers for windows 7 64 bit. Should I have the bluetooth on? I tried with media player and VLC and it wasn't responding. How can I fix this?

>How can I see if have a 32 or a 64 bit BIOS? If I have a 32 how can I make it a 64?
Start the notebook and press F2. Then you should be able to access the BIOS.
There you should see the version number. Furthermore you can download the latest BIOS from the Toshiba European driver page.
>1. I have installed a 64 bit sound drive for windows 7 of Realtek the version 6.0.1.6392 and it only recognizes the 2 speakers above the keyboard. How can I fix this?
The notebook supports the speakers: main x2 + tweeter x2 + woofer harman/kardon
All speakers are controlled by sound chip. So you need to install just the Realtek sound driver.
Further settings can be found in control panel Realtek HD audio manger.

Having problem with extra DDR2 for P45 Neo2

Having problem with adding more DDR2 to my P45 Neo2. I currently have 2x hyperx 2gb ram installed, but I would like to take it up to 8gb. I had purchased another set, installed and pc wouldn't load. I installed these into another pc and they worked fine. What am I missing? I have tried googling but cannot find the solution to my question.According to MSI it will take DDR2 800/1066/1200. It does not mention what module name it takes eg pc 5300, which I'm quite sure are the ones installed. I have just updated the bios to the most recent should this help?

Guessing you have all RAM related settings as "auto"?
Does the PC work with your new set only?
You may need to set the RAM timings&voltage manually in BIOS to common factors
that are valid for both your new and old RAM kits.
These settings you will do with your old kit in place, save in BIOS, exit and power down.
Insert the new kit in addition, see if it POSTS. May take a few tests to succeed.
CPU-Z program can help to figure some of the parameters.

[Vox] MSI VOX TV BOX USB 2.0 problem with audio drivers compatibility

Ok,let's go...
I have a DELL Latitude d510 laptop with a centrino 1.73 GHz procesor and a soundcard supported by Sigmatel software Sigmatel C-Major audio.I bought MSI VOX TV BOX USB 2.0 and tried to install it on my lap top.Yes,I had problems with SP2 on my XP and the MSIVPS software from the instalation CD was crashing every time I tried to start it,but I solved those problems by downloading the latest drivers and the 3.xx version of MSIPVS.But...I still have a problem with audio.To be precise it seems that my audio drivers are incompatible with the VOX drivers.So now I have video but I don't have audio.Also I installed the tv card on my desktop machine and it worked like a charm(everything workes:audio,video,the old MSIPVS which I like better than the new one cause it supports my remote,has better way of managing scanned channels,e.t.c ,but I have USB 1.1 on my MB so the image quality is very poor).I did a lot of experimenting,for example i uninstaled my audio drivers(that Sigmatel C-Major thing),and installed the old MSIVPS and guess what...IT WORKED but there is no use from this cause I don't have audio On the other hand if I have everything installed then in the MSIVPS (the 3.xx version not the old one) under audio I get CD Player as an input audio device(what happened with microphone...?).To cut the long story short I tried a bunch of things and still no audio.Is there any other case of DELL audio software-VOX incompatibility?Any ideas,or solutions?

thank you for answering me. y have no pci card working, only usb 2.0 and sata devices. also, the MSI geforce 9600gt PExp 2.0 gpu. the only usb 2.0 devices which work, are the flash (pen) drives, keyboard and mouse. but no way that the WLAn adapter and TVcapture, both usb 2.0 work.i've tested them front side and rear side and is the same failure: if i use a pendrive, works ok. if i insert the wlan or the tv capture stop work as the 2.0 and a advertising window tell me to change to a 2.0 port, means the ports are working slower, at 1.1. i still have the other PC, built on the MSI K9N4-slif mobo, tested them and both devices work at perfection. i have 2 screenshots to show you:
this, is the device manager (sorry, in spanish but you understand that's about the nVIDIA EHCI USB 2.0 controller. the 2nd one seems to be more sensitive (works worth) then the first one. when the tvcapture begin work, then fails, i'm trying to update this controller, does it ok but then the devicemanager-window freeze. i must stroke the "enter" key to "accept" / finish the update. then, fails again:
the other one is from everest corporate edition:
both drivers marked with purple colour!
i think i should update this Win XP drivers, but how? the usbport.inf file (C:\Windows\inf) don't change anything. i don't want to switch xp to vista, i'm happy whit it.
i'm thinking also on another possibility: could be an energy failure? some usb devices, like the big usb flash dives. 250-320gb, fail because the 5v/usb are receiving it's not enough. could be, but that means this mobo has no solution and i'll loose my money.
thank you very much and i'll stay alert of your suggestions. by

Problems with NForce Drivers on K8N Neo2

Similar Messages

Maybe you are looking for