Problems with obtaining actual results using the FFT VI.
I'm using the FFT express VI and graphing the results. My experiment involves decreasing the amplitude of a 100Hz acoustic pressure wave, ideally to zero, by phasing it with another signal of the same frequency and amplitude. According to other analysis I believe that the amplitude from the FFT of the signal is increasing and then decreasing. However, I am not able to visually see this in real-time on the graphical display.
The change in amplitude is happening quickly, every few ms. Is this timing to fast for the process to maintain proper resolution? Is there a way to make the output from the FFT more sensitive?
Thanks for the help.
The period of a 100 Hz signal is 10 ms. If your amplitude is changing every few ms, an FFT is not going to reflect this accurately. The FFT is basically defined for constant amplitude during the segment of signal being analyzed. The FFT also typically requires several cycles to give useful results. If it changes during this time, other techniques must be used to detect that. There is a large body of literature on time-frequency analysis dealing with this topic.
Lynn
Similar Messages
-
Problem with Textfield autocomplete -- only uses the INSTR function
Hi dev team,
I use the new APEX "textfield autocomplete" item type and got a really damn problem with it.
I have a table with an index on the same column which I want to search with the autocomplete field.
Index:
CREATE BITMAP INDEX TEST.GEO_DATA_IDX1 ON TEST.GEO_DATA (postcode)
NOLOGGING TABLESPACE TS_INDEX;Select which is automatically generated by APEX 4:
SELECT a.*
FROM ( SELECT DISTINCT postcode AS RV
FROM TEST.GEO_DATA
WHERE country_id = :P1_COUNTRY
ORDER BY 1) a
WHERE INSTR ("RV", :p$_search_string) > 0 AND ROWNUM <= :p$_max_rows;
-- plan
Plan
SELECT STATEMENT ALL_ROWSCost: 4,308 Bytes: 45,31 Cardinality: 1,97
2 SORT UNIQUE Cost: 4,307 Bytes: 45,31 Cardinality: 1,97
1 TABLE ACCESS FULL TABLE #TABLE# Cost: 4,306 Bytes: 47,311 Cardinality: 2,057 In APEX 3 I used the addon from Tyler Muth with my own Select:
SELECT DISTINCT
postcode AS DV,
postcode AS RV
FROM TEST.GEO_DATA
WHERE country_id = L_COUNTRY
AND postcode like l_search||'%'
ORDER BY 1
-- Plan
SELECT STATEMENT ALL_ROWSCost: 840 Bytes: 152,867 Cardinality: 13,897
8 SORT ORDER BY Cost: 840 Bytes: 152,867 Cardinality: 13,897
7 HASH UNIQUE Cost: 838 Bytes: 152,867 Cardinality: 13,897
6 VIEW VIEW index$_join$_001 Cost: 836 Bytes: 232,111 Cardinality: 21,101
5 HASH JOIN
2 BITMAP CONVERSION TO ROWIDS Cost: 31 Bytes: 232,111 Cardinality: 21,101
1 BITMAP INDEX RANGE SCAN INDEX (BITMAP) #INDEX#
4 BITMAP CONVERSION TO ROWIDS Cost: 45 Bytes: 232,111 Cardinality: 21,101
3 BITMAP INDEX SINGLE VALUE INDEX (BITMAP) #INDEX#Is there a chance getting my INDEX used by the new APEX item? I guess not. But I still want to ask before I rebuild everything. :)
Best regards,
TobiasHi Tobias,
I assume you are currently using "Contains & Case Sensitive" for the "Search" attribute. Have you already tried out "Exact & Case Sensitive"? Because that will internally use the LIKE operator as your original query does and because the % is at the end it should enable the use of an index. But it might still not work, because the ORDER BY might be executed at a different time than in your original example, but it's worth a try.
Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf -
I only have my IPhone5 for two months and am very upset that now they may need to give me a new phone and lose anything that may not have been recently backed up by the phone. Has anyone else had this problem? How did you reseolve it? Hard reboots did not help.
jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport -
A problem with middleware when i use the t-code spro in erp .
HI everyone :
Can i transfer the data from ERP to CRM automatic by middleware when i create a new entry use t-code spro in ERP .
for example ,i create a new entry in table tvv5( the group5 ).
thank you .Hi,
Customizing data are never transferred automatically from ECC to CRM. The delta load is not valid for customizing objects.
However, a download object does exist for this table, namely object DNL_CUST_SALES. What you can do is schedule an initial load for this object to run periodically in the background.You simply need to schedule a job for program SMOF_DOWNLOAD. Or you can create a request using R3AR2, then schedule prgram SMOF_REQUEST to run as a background job to load this request. These are all the options available.
I hope this helps!
Brian. -
using search or google something it will crash or closing unexpectedly
You are right, but how could i send it to Apple? when the phone company first replaced my iphone they had in stock alots of iphones and they just sent mine back to Apple and gave me a new one, so all i did is to give them my phone, but now how could i sent it to Apple? and i cant send it by myself, and the store wont do that, its a lost for them.. so sending it to Apple wasnt an option from the begining.
and for the record, i dont think the store where i bought it is an authorized shop.. its just a store who boughts phone's from Apple in a low price and sells it in much more money.. -
Strange noise problem with music layer after replacing the music file using script in CS6
Hey guys,
I got a strange problem. Sometime when I import a music file, or replace a music footage with another music file using the "replace()" or "importFile()" method, the music layer added one second noise at the beginning. like this,
Does anyone know what's going on here?
I'm using After Effects CS6 windows Server 2008 64bit.
Thanks in advance!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!Hi Myleniu,
Thanks for your replay. Actually, it doesn't matter what makes up my comp, this problem just randomly happen when I render any comp. For example, I have a comp named "noise", I run a script to replace the music then render it, I use a "for" loop to do this 5 times and the music noise problem just happen one time.
I'm starting to think that win server might be the problem. -
With Yahoo Mail, and anotare account (Inacap Mail), I can only receive mails but I can't send emails. I don't know if this is a problem of the iPad or it is a problem with yahoo mail, because using Gmail and the email of my job I don' have this problem.
Google them to confirm the settings that you need for the outgoing server, then check the setting you entered on the pad. Pay real close attention to the outgoing server name, and port. You may need to change in on the pad.
-
I have been having problems with my speaker. After the recent update I am unable to listen to movies, music or apps using my speaker. The volume bar is completely missing. If I plug a headset into the port, the volume bar reappears and then disappears after the headset is removed. This is quite annoying. My child's Apps that he likes to play will not even make a sound. HELP!!!
Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
Note: You will not lose any data. -
i have my mac pro with the keyboard in spanish and i didn't knew that it was going to be a big problem because i can't use the key pads the way they are printed, how can i use them the way they are printed?
why can't you use the keyboard the way it is printed?
-
I have my catalog "Back Up Each Time Lightroom Exits" checked, and always have. That means the catalog should have been backed-up and saved everyday, if not more than once on some dates. So with a a major problem now and needing to use the Catalog backup from last Friday, I go to my Lightroom Backups folder - and the most recent one showing not only isn't yesterday, it's OCTOBER 28 !?? Where the hell are the daily backups between October 28 and November 14?
Oh wow - JET LAG strikes agin - my apologies; I have located the missing weeks of back-ups. After getting home from a 30-day trip to Europe, I had changed the location of my LR catalog back-ups to an external drive, and forgot that I did that. I have found them, and all is good. Never operate Heavy Machinery without enough rest. Cheers
-
I had a problem with slowness so I used "reset". The popup ran forever so I stopped it. Now I can't use, remove, or add the program. How do I proceed?
TIA,
BWSwedeYou can paste that path in the command line in the Windows Explorer file manager.
-
Problem with GenericCatalogDAO JDBC Resultset using parameters not working
Hello
I have a problem with Petstore GenericCatalogDAO. java. The problem is the behaviour of the resultset object when retrieving data from the database.Below are two synareos one that
works (when) hard coded and one that does not work when parameter values passed into the the result set.
1. The code the WORKS.
statement = connection.prepareStatement("select a.productid , name, descn from product a, product_details b
where a.productid = b.productid and locale= 'en_US' and a.catid = 'FISH' order by name"
,ResultSet.TYPE_SCROLL_INSENSITIVE,ResultSet.CONCUR_READ_ONLY);
resultSet = statement.executeQuery();
resultSet.absolute(1);
String s = resultSet.getString(1);
The code that gives me a 'exhausted resultset' error which I think means no results
String[] parameterValues = new String[] { locale.toString(), categoryID };(For example parameters are 'en_US' and 'FISH')
statement = connection.prepareStatement("select a.productid , name, descn from product a, product_details b
where a.productid = b.productid and locale=? and a.catid =? order by name"
,ResultSet.TYPE_SCROLL_INSENSITIVE,ResultSet.CONCUR_READ_ONLY);
for (int i = 0; i < parameterValues.length; i++) {
statement.setString(i + 1, parameterValues[i]);
resultSet = statement.executeQuery();
resultSet.absolute(1);
String s = resultSet.getString(1);
There is obviously a problem using these named parametevalues with these preparedstatement resultset, Does anybody know anything about this and a fix for it????
Cheers. RogerWhich version of PetStore are you using?
-Larry -
Problem with database schema objects in the entity object wizard
Hi All,
When creating a new entity object, I am facing a problem with database schema objects in the entity object wizard, database schema objects (check boxes for tables,synonyms...) are disabled. Actually I am using a synonym but I am not able to select the synonym check box.
Can any of you folks tell me how to enable the database schema objects (check boxes for tables,synonyms...).
Thanks in Advance.
Raja.MMake sure your using rite version of jdeveloper..
Make sure your using apps schema and check whether your able perform DML operations in the schema vis sql developer.
--Prasanna -
Two very different results using the same settings (H.264 / Quicktime Pro)
I’m a bit confused, I have used Quicktime Pro (v7.1) to encode DV into H.264 for iPod and this particular video is 18 minutes long and came out looking very good with the following settings;
VIDEO: H.264 at 200kbps, Baseline Profile, 25fps, Auto Key Frames, 320x240 or 640x480, Multipass Best quality encoding.
AUDIO: AAC Audio at 96kbps, 24kHz sampling freq, Stereo.
However here is the twist…
When I use the same exact settings to encode just the 30 second opener (from the 18 minute video) the encoded opener looks bad and blocky!
Why? Same settings would make you assume that you should get a same or similar result, or am I wrong?
The reason I have tried encoding this 30 second opener is that I am trying to work out which settings work best on the iPod (another issue) and I don’t want to spend hours test encoding the full 18 minute video, as you know H.264 is SLOW to encode!
So can anyone help in regard to two very different results using the same settings?
Regards,
J
PC Windows XPAlvin,
Is it a commercially-released or home-burned CD?
If it's commercially-released, try "encouraging" the recalcitrant computer by using the iTunes Advanced menu > Get CD Track Names command when it shows Audio CD.
If it's home-burned, you will find that only the computer that actually burned the disc will know what's on it. The information won't be transferred to another computer.
Let us know which, if either, of these situations applies to you. -
Can any one please help me I am having problem with me Iphone4, looks like the mic of my phone is not working. no one can hear me if I make a call to them. I have tried all restoring options but no use. please help me
The mic on my iPhone4 has just quit also. Similar symptoms to yours in that people I'm talking to hear only static or my voice very faintly. The voice/memo recorder also only really records static.
It happened suddenly and seemed to get better after a day or two but then went completely after another day.
I'm returning it to Vodafone New Zealand shortly but will have to wait 5-10 days for a replacement. There are NO Apple accredited means to speed this procedure up in NZ.
We don't even have a single physical Apple Store where you could walk in and talk to a Genius.
Maybe you are looking for
-
Family Sharing and Itunes ( on WIndows )
I have Itunes on my windows computer. My wife has an Ipad, Ipad Air, and Iphone 5 with her own account, we got my son a Ipod Touch, I was able to do the Family Sharing, but had to set it up on my Wifes account, since I do not have my Itunes linked t
-
Error Launching BPEL Console - java.lang.NoClassDefFoundError
Hi All, After Installed standard SOA Basic install I am able to launch the below consoles - Application Server - ESB - Rules Author - Web Services Manager but when i launch the BPEL console i get the below error Oracle BPEL Process Manager Full Cycle
-
I recently had to reinstall my Photshop 6.0 following hard drive problems. Now I am presented with the following message when I attempt to access the organiser. MS Visual C++ Runtime Library This application has requested the runtime to terminate it
-
Lr 5.3 mit CS6 nicht mehr kompatibel
Wenn ich in Lightroom Bilder entwickle und ein paar Korrekturen (Beschnitt) vornehme und dann das Bild mit Photoshop öffnen will, startet CS6 zwar, aber das Bild wird nicht gezeigt. Bei anderen Korrekturen wird zwar das Bild geöffnet, diese Bearbeitu
-
HELP! iPhoto Crashes on my new iMac12,1 10.6.7
The error message reads: Process: iPhoto [4791] Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto Identifier: com.apple.iPhoto Version: 9.1.2 (9.1.2) Build Info: iPhotoProject-6050000~2 Code Type: X86 (Na