Problems with root ( / ) partititon dimension
Everything is on the subject, using conky as a system monitor or scanning my file system with baobab (gnome utility) i see that my / partition has 7.8 GB of files but if i try to search "phisically" these files i can find only 5.5 GB...where are the remaining 2.3 GB?
The partition is formatted with XFS filesystem...
thanks
p.s. Baobab sees 7.8 GB but when i look at the files detail below this number i can find only 5.5 GB like i said before
Filesystem blocchi di 1K Usati Disponib. Uso% Montato su
/dev/sda1 15347840 8182668 7165172 54% /
/dev/sda2 125205652 17447956 107757696 14% /home
There are some words in italiana but i believe you know the layout of the output so it won't be too difficult to understand it.
However it seems that i'm using 54% of my root partition and this is 7.8 GB, 8.182.688 KB
Last edited by Demind (2008-01-20 13:54:20)
Similar Messages
-
Problem with a multisourced dimension
Hi Guru's
I have a problem with a multisourced dimension. Some of the values that are in the tables are not visible when I create a filter and choose all choices, but when facts are set against the dimension these values do show.
This is the situation: In my physical layer I've got 3 tables that are all pretty similar, structure is like year, quarter, amount. From these three tables I create 3 fact tables and 1 dimension, where the dimension is YearQuarter with two columns (year and quarter) and 3 sources. One of these tables has a quarter 0 (zero). The DimYearQuarter table is innerjoined in the BMM wit all 3 facttables. Changing to right or left outer doesn't change the results.
In answers when i create a report just with the dimension columns , quarter 0 is not visible. When the measure (where the quarter 0 associated to) is added to my request it shows the values for quarter 0. When applying a filter, the quarter 0 is not visible with "all choices", but a filtercondition works with Quarter is equal to 0.
Any suggestions are kindly appreciated. If more info is needed, I'm very willing to provide.
I'm on 10.1.3.4.1 on windows server 2003 (server side) and XP professional as a client.
Kind regards,
GillesYou should alias the physical tables such that you can then physically join the aliases one to another. Then you should be able to use the dimension table on it's own - for prompting purposes and such.
(Aliasing of physical tables is an OBI best practice) -
I've been having issues with my root partition the last few weeks. Everytime I turn off my machine or reboot I get the warning saying umount: device busy and the machine turns off or reboots. During boot I the get the message during "checking filesystems: superblock: FIXED write time in the future" or something similar and when it checks/scans the partition (after every 35th or 37th boot) it fails. I have no idea what is the problem or how to fix it.
Regards
AndréOK, there are too many processes to sort through there easily. You shouldn't show that many processes as an ordinary user, if you are not running X. It may be normal if X is running. But I don't think it's right. And we should have used the verbose option, '-v' as well as the '-m' option. The '-m' shows all processes accessing files on that file system. The '-v' will give us human readable output.
I have separate /, /boot, /var and /home partitions. Root is /dev/sda6. From a Linux console I get
$ fuser -mv /dev/sda6
USER PID ACCESS COMMAND
/dev/sda6: root kernel mount /
casey 2676 .r.e. bash
Running openbox, tint2, urxvt, firefox and leafpad, I get
$ fuser -mv /dev/sda6
USER PID ACCESS COMMAND
/dev/sda6: root kernel mount /
casey 2676 .r.e. bash
casey 3391 fr.e. startx
casey 3407 .r.e. xinit
casey 3414 .r.e. ck-launch-sessi
casey 3433 .r.e. openbox
casey 3440 .r.e. tint2
casey 3477 Fr.e. firefox
casey 3481 .rce. dbus-daemon
casey 3482 .rce. dbus-launch
casey 3484 Frce. gconfd-2
casey 3506 .r.e. urxvt
casey 3507 .r.e. bash
casey 3511 .r.e. leafpad
Under the 'ACCESS' heading, 'f' means there's an open file, 'F' means there's a file open for writing. If /var or /home are on your root disk, the list will be longer. The effs don't show unless '-v' is used.
If you run fuser with root priveleges, you get a much longer list, but I don't think you'll need to do that. I think you want to look for processes with the uppercase 'F' and kill those processes. And then you have to find why they are not shutting down properly.
If you install lsof, and then run 'lsof /dev/sda6'it will list all the open files on /dev/sda6. Then to find the process that has /ttt/iii/some_file open, you simply enter 'lsof /ttt/iii/some_file'. to kill the process that has /ttt/iii/some_file open, enter
kill -HUP `lsof -t /ttt/iii/some_file` #Those are backticks
Edit: I'm learning here, too. I'm trying these commandsjust before I write them.
Last edited by thisoldman (2009-09-22 02:42:32) -
Journal Problem with Replicating another dimension on User Defined
Hi experts,
A curious thing is happing on development, I follow the HTG "SAP Business Planning and Consolidation for NetWeaver - Journals.pdf"; and this generate fine the journal, but when I was testing, doing a simple journal entry, a trouble occurred, the template has the structure below:
Header:
Category
Time
Group
Row:
DataSrc
Entity
Account
Intco
Flow - SubTable
CLucro - User Defined
CCusto - User Defined
So when I fill all the information to every dimension and put the amount, I save, and don't get any error message, but on CLucro and CCusto appears the value of flow, and if I consult the Infocube on listcube I get this dimensions in blank.
Fonte Empresa Conta TipMov CLucro CCusto IntCo Remark Debit Credit
AJUSTE 1161 PC011101010001 BLK BLK BLK C1161 100
AJUSTE 1161 PC013604030001 BLK BLK BLK C1161 100
Does anybody know what could be ? Journal can't has user defined dimension ?
Best Regards
Alexandre Mendoza CollepicoloHi Ethan,
I'm on BPC version NW 7.5 SP04. The HTG is on this link:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/00497d6a-0f38-2d10-bfb5-d50b91c9c0e5
I'm with the same problem related by M. Weisheit on this thread
Re: Journal entry disappear
Someone knows what could be ?
Best regards -
Problem with number datatype dimension in BIB
Hi,
I've got a problem. When I create dimension with number datatype and I assign it to my cube, I cannot use my cube with my BIB presentation object - such as Crosstab. Is this possible only with varchar dimensions?It should work, but it would be helpful if you could specify more information, for example which errormessage you are seeing and where.
-
Problems with multiple Attribute Dimensions
Hello Guys,
when i try to get data from an Essbase database using the Grid API with more then one Attribute Dimension,
the server needs a very long time to response or doesn't response at all.
I encounter the same behaviour when i perform a query using the Excel Query Designer.
Here is a sample query log output:
<subquery>
<cluster size="1">
<dim size="1"><member>MEASURE</member></dim>
<dim size="1"><member>PERIOD</member></dim>
<dim size="1"><member>YEAR</member></dim>
<dim size="1"><member>CATEGORY</member></dim>
<dim size="1"><member>CURRENCY</member></dim>
<dim size="1"><member>CUSTOMER</member></dim>
<dim size="1"><member>PRODUCT</member></dim>
<dim size="1"><member>Business</member></dim>
<dim size="1"><member>black</member></dim>
<dim size="1"><member>Attribute Calculations</member></dim>
</cluster>
</subquery>
<elapsedtime>94.217 seconds
Any help would be appreciated.
Regards,
Martin BrandlThanks for the swift response. Always ideas are useful.
As of now , Middleware cannot split the file.
Thing is SAP is creating two Idocs with different message types. Problem is First IDoc contains ORDERS message type but also DELIVERY segments as well. Second IDoc with DELIVERY message tyoe but ORDERS segments as well... This is the problem... I think we are missing some field activation in file for EDIDC record.
As far as I know file port supports the number of IDocs in one file.. Hope TRFC port also supports that -
Problem with root and constructors
hello guys,
i have serious problem, its 2 days i am trying to do something about it,
i have some object inside object inside another object,
if in their constructors i write:
MovieClip(root).someVar
(or function)
its not working!
it works only i regular functions,
i cant even call a egular function from the constructor,
please help my guys, i really need this!
thanks alot!function YourDisplayObjectClass(){
// this is the contructor
// trying to reference MovieClip(root) or stage will trigger a null ref error
// because YourDisplayObjectClass instance isn't added to the stage, yet
this.addEventListener(Event.ADDED_TO_STAGE,init);
private function init():void{
// from here you can reference displaylist items.
trace(MovieClip(root),stage); -
Hi Gurus
I have a problem with the time dimension and hierarchy, because it does not add to totals
Example
2011.ABR | 2011.MAY | 2011.JUN | 2011.JUL | 2011.AGO | 2011.SEP | 2011.OCT | 2011.NOV | 2011.DIC | 2011.TOTAL
10 10 10 10 10 10 10 10 30 30
2011.TOTAL sum 30, it should be 110
ID EVDESCRIPTION PARENTH1 LEVEL YEAR PERIOD MONTHNUM STYLE TIMEID
2011.TOTAL 2011.TOTAL YEAR 2011 TOTAL 12 T2 20110000
2011.Q1 2011.Q1 2011.TOTAL QUARTER 2011 Q1 3 T1 20110001
2011.Q2 2011.Q2 2011.TOTAL QUARTER 2011 Q2 6 T1 20110002
2011.Q3 2011.Q3 2011.TOTAL QUARTER 2011 Q3 9 T1 20110003
2011.Q4 2011.Q4 2011.TOTAL QUARTER 2011 Q4 12 T1 20110004
2011.ENE 2011.ENE 2011.Q1 MONTH 2011 ENE 1 N 20110100
2011.FEB 2011.FEB 2011.Q1 MONTH 2011 FEB 2 N 20110200
2011.MAR 2011.MAR 2011.Q1 MONTH 2011 MAR 3 N 20110300
2011.ABR 2011.ABR 2011.Q2 MONTH 2011 ABR 4 N 20110400
2011.MAY 2011.MAY 2011.Q2 MONTH 2011 MAY 5 N 20110500
2011.JUN 2011.JUN 2011.Q2 MONTH 2011 JUN 6 N 20110600
2011.JUL 2011.JUL 2011.Q3 MONTH 2011 JUL 7 N 20110700
2011.AGO 2011.AGO 2011.Q3 MONTH 2011 AGO 8 N 20110800
2011.SEP 2011.SEP 2011.Q3 MONTH 2011 SEP 9 N 20110900
2011.OCT 2011.OCT 2011.Q4 MONTH 2011 OCT 10 N 20111000
2011.NOV 2011.NOV 2011.Q4 MONTH 2011 NOV 11 N 20111100
2011.DIC 2011.DIC 2011.Q4 MONTH 2011 DEC 12 N 20111200
Please Helps me
Regards,
NayadethHi Nayadeth,
It looks like the account for which you are getting the value like this is a balance sheet account. The balance sheet accounts will have the ACCTYPE property as AST or LEQ. Both these type of accounts have this behavior. The BS always represent year to date figures. That's the reason, in the TOTAL, you are getting the value of DEC. In Q1 you will be able to see the value of MAR. If you change the ACCTYPE to INC or EXP, then the TOTAL will have the sum of all the months.
Hope this helps. -
Unknown device - ipod nano fine - problem with windows xp and usb root hub
Greetings all. I've seen this question come up over and over again and have been working on it following previous posts and posts on microsoft and hp sites for a couple of days now.
First off - the ipod nano is fine. Works on my son's computer well.
When I plug it into my 6 months new HP Pavilion laptop it says: 'found new hardware' and goes through the process of installing it, says it's been installed, but then shows 'unknown device'. In Device Manager it tells me there are no drivers installed, but when I try to follow the other instructions on this forum to update the drive to USB mass storage device (usbstor.inf), it tells me the best driver is installed and won't do it.
Many seem to have this problem with devices other than the iPod on Windows service pack 2 so I went to the Microsoft forums and they seem just as puzzled. I've updated all my Windows & HP software to the latest possible versions. The problem is definitely in the USB. Once, when I uninstalled the USB device and then rebooted the computer with my iPod still plugged into the port, it found my iPod, correctly identified it, and for a blissful moment I thought everything was fine! Then it reinstalled the USB drivers and made a comment to the effect that I should move the iPod to a USB 2.0 port for more effective operation and the iPod disappeared again.
I have 3 USB ports on my laptop, all are USB 2.0 and all 3 have the same problem.
I've tried all the stuff people have already said on here...does anyone have any NEW ideas? I'm hesitant to take it in for service because it seems to be a software problem that should be fixable.
Thanks in advance for your help and sorry about the long post.This isn't a solution, but it's something I just tried and it may provide someone additional clues about's going on. I too think this is some sort of USB problem.
I have 6 USB ports. Two of them are USB 2.0. Since I applied the 03-23 update my computer hasn't recognized my nano at all. I would connect my nano and I couldn't get it to show up in My Computer, in iTunes, or on the far right side of the Start taskbar.
I just tried plugging my nano into the first USB port of my USB 2.0 pair and left the second 2.0 port empty. I then rebooted with the nano attached. Viola - I get a "Found New Hardware Apple iPod USB Device" message. My nano is now flashing "Do Not Disconnect." A small removeable storage icon with green arrow now shows on the far right side of the Start taskbar. If I click on it (like you're going to eject it) the note displayed says "Safely remove USB Mass Storage Device - Drive (F:)".
If I go into My Computer, "Removeable Disk (F:)" now shows there. However, if I try to follow Trevor's instructions in another post to "go into My Computer with iPod connected, right click it, wait till the right click menu comes up (could take a few minutes); click Format, . . ." I'm stuck. I do the right click, watch the hour glass and wait for the Format menu to come up but it never does. Eventually the hour glass just goes away. No message, no Format menu. The waiting hour glass just goes away.
My computer isn't as new as yours, but like you I am completely current on maintenance.
I'm going to keep trying . . . If anyone has any ideas, please let me know.
Dell Dimension 8100 Pentium 4 Windows XP Service Pack 2 Phoenix ROM Bios PLUS Version 1.10 A09 -
Problem with file dialog (root frame)
Hi guys
I�m having a problem with open up a filedialog.
I have a rendered jlist and the are some items inside. The user, can right click any item and choose from a list some commands (print, save, update etc)
Everything works fine but when he clicks the SAVE option (again, right click and choose save)
FileDialog fd = new FileDialog(new JFrame(),"Save PAX list",FileDialog.SAVE);
I cannot use new JFrame() (as I did above) because it might block the application.
For this I�m trying to get the root by:
Component c = SwingUtilities.getRoot((Component)e.getSource());
JFrame myFrame = (JFrame)c;
And than:
FileDialog fd = new FileDialog myFrame,"Save PAX list",FileDialog.SAVE);
This get me a null frame :- (
Anyone?The following worked on a "normal" menu item. I didn't test it on a "popup" menu item:
JMenuItem mi = (JMenuItem)e.getSource();
JPopupMenu popup = (JPopupMenu)mi.getParent();
Component c = SwingUtilities.windowForComponent(popup.getInvoker());
System.out.println(c); -
EPM add-in problem with input data,retrieve dimension or members
Hello everyone,
I am trying to use data write back (input data) function with EPM add-in in Dashboards. I managed successfully bringing results of an EPM report. I've created a local connection at EPM, and created a connection at data manager for"Planning and consolidation, version for SAP netweaver platform". And i could get the values via refreshing connection at preview mode, so far so good. Now i want to add a connection which will serve as data write back function to a specific BPC cube. The problem is, I can retrieve data source name and environment name. But when i click to retrieve model names, it retrieves empty results. The problem exist in, "retrieve dimension" and"retrieve dimension members" functionalities too. I realized that i could retrieve model names for only one specific environment, but even i could get these, when i try to retrieve "cell definition" i am facing an error. You can see related screenshots below.
I am using Dashboards 4.1 SP2, EPM connector 10 SP 17. I created two connections as local and business planning and consolidation for netweaver. I selected same environment and model name for these connections. Neither did work. Any ideas?
Update: The reason i could see some model names and some others not was i didn't specified the model as data source at:
Enable BPC Model as reporting data source
Logon to BPC 10.0 NW web client -> Planning and Consolidation Administration -> Dimensions and Models -> Models -> Select the Model -> Edit -> Features Used with the Model -> mark check box 'Use as Source of Data' -> Save.
I will update here if i could find a solution for the other issue. (First screenshot).
Update_2: The problem was occuring because i wasn't connecting to transient cube, created automatically by applying the step at Update_1. While creating a local connection, you shouldn't connect to the original cube, but to the transient one instead to use input data functionality.
Regards,
Onur
Message was edited by: Onur GöktaşHI,
I believe it is definitely the support pack. I posted an issue on this forum and I saw your post. Your issue is very similar to mine. I saw Andy's reply to you about the SP 18 and looked into it. Thanks Andy. SP 18 resolved my issue. See my post. Kathy -
Problem with drill down in time dimension - OBIEE 11G
Hello There,
I have a problem with drill down in time dimension. The hierarchy for time dimension is " Fiscal Year---> Fiscal Quarter---> Month(Name)--->Date". When I select a Time dimension and click results its getting opened in a Pivot table view. The problem here is, when I click the "Total" its getting drilled down to Year ---> Quarter but when I click on "+ sign next to quarter" it should drill down to month for that particular quarter for that particular year but its drilling down to month for that particular quarter for all years.
Any suggestions are much appreciated.
Thanks,
Harry.1.) Congrats for resurrecting a year-old thread.
2.) Your answer is here: "Check the level key of the quarter level...it should include both quarter and year columns. Since a specific quarter occurs every year, quarter column alone can't be used as the level key." -
Obiee 11g problem with dimension time DATETIME
Hi experts!
I have a problem with a column of my time dimension. In my database I have a column called "DATE" and it has this format "01/12/2009 00:00:00" (property column is DATETIME) when I import this table in Oracle Administration I see the same format that my database but I want to see without any Hours,minutes...like this: "01/12/2009"
How can I fix this??
Thanks!!!Hi alex,
check the column name your passing and then cast it....the error is not related to that i suppose as it is internal assertion.
chk this http://tipsonobiee.blogspot.com/2009/06/error-nqserror-46036-internal-assertion.html
UPDATED POST
You can alternatively use oracle trunc function in the physical layer to trunc the timestamp.
1) go to the table where the date column is coming in physical layer
2) go to the general properties and select SQL and write the SQL of all the columns needed from that table like
select x,y,z,trunc(date) from table_name.
3) this truncates the timestamp
UPDATED POST-2
By the way which database are you using,if its oracle trunc works out....other databases it wont work
select trunc(sysdate) from dual in your TOAD and check out.
hope helps you,
Cheers,
KK
Edited by: Kranthi.K on Jul 27, 2011 3:15 AM
Edited by: Kranthi.K on Jul 27, 2011 4:01 AM -
Problem with Time Dimension generating
Hello, everybody.
I have a problem with Time Dimension generating with the help of the Standard Wizard.
1. I choose Dimensions -> New -> Using Time Wizard
2. Set Name as "Time"
3. On the next screen I choose ROLAP: Relational Storage
4. On the next screen set Start year: 2003, Number of years: 3
5. On the next screen choose all levels of the Normal Hierarchy
On the 6-th step Wizard complete 60% of job and hang up doing nothing (buttons "Cancel" and "Help" is active).
chapter "Create REL_TIME Dimension Using the TIME Dimension Wizard", step 1-6 of tutorial =(
http://www.oracle.com/technology/obe/11gr1_owb/owb11g_update_getting_started_intro/lesson3/less3_relational.htm
My system characteristics:
Builder client 11.1.0.7.0, warehouse at local computer.
can anybody give me any advice about this problem? =(
thanks in advance.Had this issue been solved please?
I have just come across the exact same problem and this post is the only one i managed to find which describes exactly what is happening to me.
Thanks -
Newbie:Problems with SCSI root disk
Hello
I have periodic problems with no matter what disk I put in my root partition. My Sun has several disks, so I can take another disk not being used and configure it as my new root disk, installing Solaris root on it.
But when, this way, I replace the disk by another "fresh" disk and reinstall Solaris all goes Ok during some time (days or months) until suddenly I get I/O Errors allways in that disk.
I use a E250 with Solaris8. The problem also arises with Solaris7.
If I do a probe-scsi-all at ok prompt I frequently see hardware errors in that disk. All those errors where not present previously when my disk wan't the root.
What is corrupting my disks a I use them?
Am I missing something when I put a new disk? Should I change the ID of my previous SCSI disk?
If so, how?
ThanksAre you using the disks in the same slot? It may be the controller....
Maybe you are looking for
-
Late 2012 iMac Freezes every few days
My iMac has been in the Apple Store for a week with the Geniuses and they came back saying they couldn't find anything so putting this out to this community in the hope someone else can help. Here are the details. Model: 21.5 inch Late-2012 iMac RAM:
-
How to set value of textinputbean in am
hi guys,I have an item on my oaf page that is non data base item and i want to set its value in AM.Actually I am calling a DB procedure in AM that return me a value now i want to set this value in TextinputBean.but i dont know how to set a non databa
-
OCA in forms 4.5 connected with Ms Access
i have written a cursor which get values from one table and same to be stored into other table. but it is fetching only first and last records. what could be the reason
-
I am using a MacBook running OS 10.5.8 and using Firefox 3.6.10. When I scroll down my list of bookmarks the cursor will highlight a bookmark and although I continue to move the cursor the previously mentioned bookmark remains highlighted and the sub
-
Looping multiple excel files at a time in ssis and create a new column to insert the files names
Hi Friend, i have one requirement. I got around 200 excel files with date as file name like 120101.xls, 120102.xls (YYMMDD). I am able to loop all the files and insert data but i am unable to load the files names using ssis. Please can any one help t