Problems with Speakers playing in T7800

I recently ordered a T7800 7.1 system for all my sound needs. While I'm waiting for my Audigy 4, I figured I'd set it up anyway and plug it in to the original sound card that came with my computer. All the cables are plugged in, and I set the sound settings under control panel to a 7.1 system. However, only the two main speakers and the subwoofer are playing. Why wouldn't it work? I'm quite stumped, and I really hope that this doesn't happen when I get my Audigy 4 (which should be here in 2-4 days).

clskiller: As Joeagain implies, the MuVo has no concept of a playlist so when you transfer the tracks over they'll be simply copied to the device and then the MuVo will always sorts files within a folder by filename.
If you want to change the order you need to use a program like?ReOrganize to change on the player, or rename the filename on the PC (or use folders, as Joeagain suggested).

Similar Messages

  • Audio has ceased when at Amazon and with e-mails with audio attachments. This only during last few days previously O.K. Windows Media Player still working so no problem with speakers only happens with online audio. John

    Operating system Windows 7. A few days ago no problems with audio, clear sound when listening to e-mail audio attachments and Amazon music samplers. During last 2/3 days both attachments and samplers fail to work, but when playing music from library held in Windows Media Player no problems. This would appear to show no problem with speakers etc and I have not knowingly amended any audio controls.

    Thank you so much for replying.
    Yes I have removed and reinstalled WMP.
    I had good results with the PD6 application installed on the default path onto the C: drive with the one exception that if the application was launched by accident and the user data path was not available, the PD6 application would blow away my custom user path registry settings. Now that I know what they are I have made a .reg file to repair my registry to my desired user data paths.
    Installing the application on the removable drive appeared to help prevent me from launching the application by accident and overwriting my registry with default user paths.
    So which is the less of the two evils?
    If the application directory is not available, windows media player still tries to launch the .msi for installing PD6.
    If I install the application to the C: drive but the user data to the removable drive, launching the PD6 application without the user data drive will still corrupt my registry settings for a user data path.
    Both these issues seem like a logical (if not easy) fix that should be done in the PD6 application and installation package. I mean really, cannot anyone tell me why windows media player is checking the PD6 application directory? Why in PD4 did we have an option control for setting the user data path from the PD4 application? Why is this option not in the PD6 application, just the installer?
    I am given a choice during installation to move the user data to another non default location. Why else would this be provided if not to accommodate my kind of request to store the user data into an alternate location other than “My Document”. Certainly Palm is not trying to force the users on how to protect and store their personal data?
    Post relates to: Centro (Verizon)

  • Problem with speakers or is it normal?

    First off, this is my first time buying a Sony smartphone and I love it; it replaced my old Prism II and Sony Walkman NWZ-E465.
    After using it for about a week, I realized something odd. The speakers play music from one end, which makes me wonder if this normal or not. If it is not normal, I could send to the Sony store nearby since I have a 2 year warranty and a Accidental Damage plan on it. 
    Oh and here's the video of the "problem": Donny's Z1 Compact
    Solved!
    Go to Solution.

    There is the speaker located,the same on Z1 but on the opposite part.
    All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

  • Problems with Speakers

    Hi,
    I've had my Airport Express for a couple of years all has been fine until now, I've not used it for a while and wanted to get back to streaming my music into my study.
    The unit joins my network without any problem, iTunes allows me to select the Airport Speakers however when I select Play from iTunes I get this error "An error occurred while connecting to the remote speaker "RemoteRoom" An unknown error occured -3256"
    I've tried from my iMac and my laptop, both have the same problem, the speakers are also working fine. I am stumped, multiple restarts later I hoped somebody has an idea what this error is and how I can get around it?

    I'm having the same issue David,
    everything was fine until I updated my iTunes to 8.01. giving me the same 'unknown error -3256' when I try to connect Airport Express with iTunes 8.01. This is troubling since it still works with my other computer which is running iTunes 7.0.
    Guesses anyone? I'll post any finding I come up with, please anyone else do the same.
    Thx

  • ITunes problem with speakers

    This only started recently, but when I play music on iTunes, it starts off fine but every once in a while, sound will stop coming from one speaker (or sometimes both). I thought it was a problem with my speakers at first, but then I realized that pausing and resuming the song would fix the problem. So I tried playing songs with other programs and tried the audio on websites and they work fine. Not too sure what the problem is.

    Some have posted issues using the Apple TV with extended networks.
    Is it possible that it is some sort of interference to your network that is causing problems rather than distance. Have you tried using a different wifi channel.

  • Problems with mirror play to Apple TV from macbook air

    Hi,
    I'm having difficulty's streaming from my macbook air to the tv screen via the apple tv.
    The Apple TV is conected to the Internet via wifi and it plays rented movies or streaming youtube fine but if i try to watch a movie from my laptop (stream of the net ) and watch it on the tv then it wont work properly , it has excessive lag and cuts out or wont connect to my laptop at all . it wont show the desk top intermittent either and massive delays when it does.
    i think it may have something to do with an update or something ? I have mavericks on the air and everything is updated , i have 2 apple tvs and 1 is connected through Ethernet and it seems ok I've also tried to do the same through my imac with parrot but its the same problems even tho its connected directly to the router.
    Thanks in advance
    stu

    The Imac has the same problem with playing to the lounge room atv but no where near as bad, ( can actually watch a movie) it just cuts in and out a little but when you watch it on the imac screen its playing fine.
    my modem is a netgear dual band and i have tryed both bands and still has the problem i also have a range extender and its bad through that but when I originally purchased the atv it worked fine with it.
    I don't watch a lot of movies mainly stream music through the iphone on it and this is why im thinking that an update may have affected it cause it used to work fine but i also did purchase the netgear router and im thinking it may also could be a problem but what i cant understand is the problem is only with airplay or parrot depending on laptop or desk top and no real problems with the iphone streaming movies or the stream ok through itunes apart from some movies don't have sound in itunes .
    When you say I can adjust the router could you tell me what to adjust or how ?
    Thanks for your help

  • Problems with instant play in some browsers

    This is not a problem with how Safari works, but I thought someone here might help me with a frustrating problem for which I can find no solution.
    I created several web pages with embedded QuickTime movies in mp4 format.  They are constructed so that the movies begin instantly to play as soon as the pages are accessed.  This has worked for the past couple of years regardless of which browser was used ( Mac versions of Safari, Firefox versions <4.x, Sunrise and others;  Windows versions of Internet Explorer and Firefox).
    It has recently been brought to my attention that this functionality is broken when updating to Firefox 4.x for Mac or when using Chrome for Mac.  Using either of these browsers to access the pages results in a static page with no video play.  The user must wait 1-2 minutes for the video to completely download and then it will automatically play.   Since the movies play fine on multiple browsers, including the new Firefox 4.x for Windows, it seems to me that the problem is not in how the movies were coded but rather in how the browsers handle the html code for the pages.
    The movies were edited in FCP, exported to Compressor, processed as mp4 streaming video and then embedded in web pages using Freeway Pro software with the "auto play" option enabled.
    Any ideas will be appreciated.
    John
    a sample page is:    http://lccut.org/videofiles/gospelvideo6high.html

    Here's the response I got from Freeway Pro support:
    Hi John
    There seems to be an issue at the moment with the way that Firefox 4 (and to a certain extent Chrome) handles QuickTime movies. If you go to the test page on our site at <http://users.softpress.com/keith/firefox4test/> you'll see that it is very erratic in what it shows and how it plays - but note that you may need to wait a while in between clicking on Firefox 4's Refresh button to see that the results change from one refresh to the next.
    Freeway is certainly publishing the code correctly, so this is does not appear to be a Freeway issue - though we would like to get to the source of the problem so we can advise customers on the best options to fix things. If you Google for "firefox4 quicktime movie problem" (without the quotes) you will see that this is not a problem specific to Freeway users.
    Leopard users report that Firefox 4 displays and plays QT movies fine, but Snow Leopard seems to have problems. This may be due to the way that QuickTime and Firefox 4 play together, as Leopard and Snow Leopard use slightly different versions of QuickTime.
    You should, however, be aware that non-Mac users will always need to download the QuickTime plug-in (which many PC users are reluctant to do, and some may not be allowed to by their IT department) for them to be able to see the movies play. The only truly universal method for offering video content on a web page is to use Flash .flv files and then use the FLV Player Action so that iPhone/iPad users will see an alternative (non-Flash) movie which is created by the Action. See the movie tutorial at <http://www.softpress.com/support/tutorials> (Episode 14) for details of how to set this up.
    As soon as we find a workaround for the problems with Firefox 4 and Chrome, we will put up an article on our KnowledgeBase at <http://www.softpress.com/kb/>. It might be that Firefox and Chrome will release a new update soon to fix the problem, in which case we will tell you which version you need to download an install.
    Best regards
    So the FW people insist that there software is encoded the pages properly and it is the fault of the newer Mac browsers causing the error.
    John

  • Problem with speakers/headset working together

    I'm trying to set it up so all my sound comes through the speakers except for Ventrilo, which would come through the headset. The mic on the headset is working fine, and there are no problems with the speakers at all. The only problem is getting only Ventrilo to come through on the headset.

    Hi,
    Try the following.
    Download the Conexant HD Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp45001-45500/sp45166.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the Conexant device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the Conexant installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Problem with "stop playing causing camera light to flash

    Since ipgrading to ios 5.1 I se that Apple took away the Sleep ipod opton for the timer and relaced it with "stop playing".  Unfortunately, wen the timer reaches zero, the phone stops playing but the camera flas starts flashing until I unlock the phone.  Besides being annoying, this obviously defeats the purpose of resting the phone and saving battery life.  Any suggestions?  Note: I do have a flaslight app on the phone in case that makes a difference.

    Thanks again
    I have removed the keyframes in frame 2 and 6 on all the layers (please seen new pic below), however the problem still persists.
    Here is my code on my actions layer:
    stop();
    toolbar.addEventListener(MouseEvent.MOUSE_DOWN, fl_ClickToDrag);
    function fl_ClickToDrag(event:MouseEvent):void
        toolbar.startDrag();
    stage.addEventListener(MouseEvent.MOUSE_UP, fl_ReleaseToDrop);
    function fl_ReleaseToDrop(event:MouseEvent):void
        toolbar.stopDrag();
    about.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndPlayFromFrame_4);
    function fl_ClickToGoToAndPlayFromFrame_4(event:MouseEvent):void
        gotoAndPlay(2);
    latestnews.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndPlayFromFrame_6);
    function fl_ClickToGoToAndPlayFromFrame_6(event:MouseEvent):void
        gotoAndPlay(3);
    services.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndPlayFromFrame_7);
    function fl_ClickToGoToAndPlayFromFrame_7(event:MouseEvent):void
        gotoAndPlay(4);
    portfolio.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndPlayFromFrame_8);
    function fl_ClickToGoToAndPlayFromFrame_8(event:MouseEvent):void
        gotoAndPlay(5);
    contact.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndPlayFromFrame_9);
    function fl_ClickToGoToAndPlayFromFrame_9(event:MouseEvent):void
        gotoAndPlay(6);
    As you can see the code looks pretty correct to me. Ignore the code at the top, that is just for a draggable graphic on the page.
    Any clues from the code??

  • Back board sound problems with speakers (front jack fine)

    hello
    i recently upgraded my system to the p7n sli platinum
    weird problem has occured
    The front out jack works fine both with headphones plugged or with speakers
    but rear green jack doesnt work with either speakers or headphones plugged in
    moreover, frontjack puts out only left channel in both speakers and no right channel at all
    does anyone have a solution?

    re update
    I found the little check mark that enables to hear both front and rear audio.. so that is set
    only problem left is stereo sound.  when i click right audio output i get no sound, when i click the left audio output i get sound in both sides.. anyone?

  • Problems with speakers shutting down

    I have a gigaworks pro 5.1 surround sound system I've had it for about 2 years now and i'm starting to have this problem with my speakers shutting down even though there is power running to the system I can hear a sencer click when the system shuts down when I try to start it by pressing the on button or flip the switch on the back of the system the system will not start I have to unplug the hole system and plug it back in to start the system and then the system will work for a few minutes and shut down again I was wondering if anyone has had the same problem and if so how did they fix it

    Hi faizraja,
    Thank you for your query,  I will do my best to assist you.
    I grasp that it will not shutdown from the menu options and the speakers don't work most of the time.
    I would try a Refresh Your PC to Resolve Problems (Windows 8). Just to be on the safe side, I suggest backing up your personal files to prevent loss.
    Here is a link to  No Sound from Speakers (Windows 8) to assist with the speaker issue. Are you accidentally muting your system?  Here is a link to HP Pavilion g6 Notebook PC Maintenance and Service Guide, please not page 12 item 3 for this option.
    If this has not helped, I suggest you do a recovery back to factory. Performing an HP System Recovery (Windows 8).
    You will receive a prompt to backup your personal data to prevent loss. If you have not done one recently, I suggest you do one now.
    Restoring Files that were Backed Up Using HP Recovery Manager (Windows 8)
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • A problem with the Play/ Pause control button in a quiz project

    Hi,
    I have a probem with the play/ pause button in this project,
    it is a quiz project, the problem is when I click the pause the
    project does not pause and keep working ? Any idea why?
    http://www.megaupload.com/?d=995I8WX9
    Thanks

    If you have bought you Macbook within 90 days or have bought AppleCare you can call them for free and ask them what you should do. 1-800-MY-APPLE

  • Tens of Thousands having massive problems with Flash Playing Cityville

    Literally tens, possibly hundreds, of thousands of people are having problems with FlashPlayer crashing constantly while trying to play a Zynga game, Cityville, which plays on Facebook while running the game on Google Chrome. None of us had this problem before sometime last week and now playing the game is all but impossible. Sometimes the game works for a minute or two with great lag and sometimes it shuts down right after you get the game up and running. The only message we get is that Flashplayer has crashed. We can restore the page and go again for a minute but the problem occurs time after time. Does anyone know a solution or does  anyone know how to get Adobe, Zynga and Facebbok to get together and solve the problem? Most of us are just computer users and aren't computer savvy so don't know what to do.
    I followed instructions on my PC and got a little more info. It seems that Windows 'sees' the program on it's initiation as a possible threat to the system and/or running too slowly. Her is some information I found but I don't know and am afraid to do anything else with it.
    Heck, I can't even upload that; I'm told the file type isn't allowed. LOL  Anyhow it told me that I should go into my MOTO Connect Service and manually select (with instructions) the .EXE file for the app to bee an exception to the genral DEP. I didn't do that because I was a bit timid and also never found an .exe file that looked correct. Perhaps I should be happy about that....
    Anyhow, there are over 6 million people who regularly play Cityville and all of them no doubt have adjusted their opinions about Adobe because of this. Shame is that it is not likely even Adobe's problem.

    If you are having issues with the Flash Player, there is a forum dedicated to it that would be a more suitable place for discussions about it...
    http://forums.adobe.com/community/webplayers/flash_player

  • Strange Problem with Speakers/sound

    Hi,
    I have a Powerbook Ti DVI 1 Ghz and have been experiencing a strange and inconsistent problem. Sometimes, the sound "blows out" as though it is too loud and works in the two highest system volume notches. Whenever I press the volume button onto lower settings the speakers give me a muffled sound when I press it and do not give out sound.
    I've tried the system prefs and everything is as it should be. This problem is sometimes caused by putting in my headphones. Sometimes restarting the computer fixes the problem, but it is all very strange to foresee.
    Has anyone experienced anything of this sort? Any advice appreciated.
    Thanks,
    M

    Hi roibs,
    > It disturbs me a lot because my computer is making sounds while I am in classes (from apps running\web sites etc.). I almost got kicked out of class several times because of it.
    Maybe you should leave your computer at home and not play with it in your class ;)
    Anyway, I would recommend disabling all Windows sounds in control panel. That means no sounds will be played while you navigate through the Internet or use the Explorer.
    Check this!!!

  • Problem with speakers

    I experienced today that my iPhone 4s speakers failed to work. This happened once before, then I fixed it by using a blow dryer. I tried this now, with no success. I don't hear any sounds while typing, locking the iPhone, nor when I listen to music or apps. - it only works when I plug in the headphones. The speakers work when I receive a call, and when I adjust the volume in settings. I have already tried to restart and restore, but neither worked. And when I try to adjust the volume with the volume buttons, it does NOT say headphones, so I don't think the jack is the problem. What to do?

    IIt failed to work last nifgt, and it didn't fix automatically during the night (it's 10:25 AM in Norway now). Same problem as before. I really don't know what to do about it

Maybe you are looking for