Problems with templates in DW MX 2004

As the subject line states, I'm using Dreamweaver MX 2004.
The problem is, I haven't made any updates to my site for a few
months, but the last time I did make an update, the templates were
working fine. Now when I go to make an edit to one of the
templates, the change doesn't propagate to any of the pages based
on that template (messages suggest that Dreamweaver can't find the
template files, but the path to the templates is correct, and the
templates subdirectory is intact with the templates still there as
they always have been. It's like the pages have spontaneously lost
all connections to the templates, but not 'really' since the pages
still recognize editable and noneditable regions specified by the
templates. Can someone please help?!? I'm getting a little
desperate at this point to understand what's going on.
(otherwise I'll be forced to remove templates from pages,
which will cause me ALOT of time and work, and introduce the
potential for alot of error when updating pages consistently.)
Thanks

Do changes to other templates work on this site? Do they work
on other
sites?
Here are seven common mistakes that will result in changes
not propagating
from Template to child -
1. Rename the Templates folder
2. Move the Templates folder to some other folder level in
the site other
than root level
3. Move a template out of the Templates folder.
4. Make changes to an editable region of the template (which
will not
propagate)
5. Assume that template changes can be uploaded to the server
without also
uploading the changed local files
6. Corrupt the site cache so that the link between template
and child page
is broken
7, Improperly create your child pages by simply opening the
template,
adding page specific content, and resaving the template with
an *.html
extension rather that its *.dwt extension. (you can tell if
this is the case
by looking at the code on a child page - if you see anything
like <!--
TemplateBeginEditable... then this is what you have done). If
you *have
done this*, then recreate the child pages (in DWCS3) using
FILE | New > Page
from Template, select the template and click CREATE.
The 6th problem can be repaired by using SITE | Advanced >
Recreate Site
Cache, and the six others can be fixed by just not doing
them. Have you
done any of those?
Or, read this -
http://www.adobe.com/go/dd83ba8b
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"frostdawn" <[email protected]> wrote in
message
news:[email protected]...
> As the subject line states, I'm using Dreamweaver MX
2004. The problem is,
> I
> haven't made any updates to my site for a few months,
but the last time I
> did
> make an update, the templates were working fine. Now
when I go to make an
> edit
> to one of the templates, the change doesn't propagate to
any of the pages
> based
> on that template (messages suggest that Dreamweaver
can't find the
> template
> files, but the path to the templates is correct, and the
templates
> subdirectory
> is intact with the templates still there as they always
have been. It's
> like
> the pages have spontaneously lost all connections to the
templates, but
> not
> 'really' since the pages still recognize editable and
noneditable regions
> specified by the templates. Can someone please help?!?
I'm getting a
> little
> desperate at this point to understand what's going on.
>
> (otherwise I'll be forced to remove templates from
pages, which will cause
> me
> ALOT of time and work, and introduce the potential for
alot of error when
> updating pages consistently.)
>
> Thanks
>

Similar Messages

Problems with Template JDeveloper 11g

Hi! I have problems with template in Jdeveloper 11g.
I had created jspx page from templeate:
<?xml version='1.0' encoding='windows-1257'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=windows-1257"/>
<f:view>
<af:document>
<af:form>
<af:pageTemplate viewId="/augiTemplate.jspx">
<f:facet name="mainArea"/>
</af:pageTemplate>
</af:form>
</af:document>
</f:view>
</jsp:root>
THERE are error:
JSF page template at path /augiTemplate.jspx requires a model binding!!!
Why it is so an what it means? Pleas help!
Best regards!

Hi,
it means that your template has an ADF binding (PageDef) reference. When you create a page in the JSF page dialog and assign the template then the binding reference is created for you. You should see a bulb in the page source editor. Press it an it should create the missing binding for you
Frank

Problems with templates overtaking first line?

Has anyone else had a problem with templates taking over the first line of code in any page that a template is applied to?
I created a template that starts like this:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />

but when that particular template is applied to a page it writes this to the code:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN"
"http://www.w3.org/TR/html4/strict.dtd">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />

I don't particularly mind this, but in IE8, because the comment is the first line - and NOT the doctype, it forces the browser into another doctype and breaks the page.
Has anyone experienced this?
I've tried re-creating my templates, but I'm not finding the reason why it decides to place that comment in the beginning sometimes..

The problem may be that the comment is on the same line as the doctype, try putting a blank line between the template comment and the doctype statement
e.g.
..... IsLocked="false" -->
<!DOCTYPE HTML .....
The comment is place in the line before the doctype to enable editing of server side code, (php, asp, .net, etc.).
PZ

Compilation problem with templates while using option -m64

Hi,
I have compilation problem with template while using option -m64.
No problem while using option -m32.
@ uname -a
SunOS snt5010 5.10 Generic_127111-11 sun4v sparc SUNW,SPARC-Enterprise-T5220
$ CC -V
CC: Sun C++ 5.9 SunOS_sparc Patch 124863-01 2007/07/25
Here is some C++ program
############# foo5.cpp #############
template <typename T, T N, unsigned long S = sizeof(T) * 8>
struct static_number_of_ones
static const T m_value = static_number_of_ones<T, N, S - 1>::m_value >> 1;
static const unsigned long m_count = static_number_of_ones<T, N, S - 1>::m_count + (static_number_of_ones<T, N, S - 1>::m_value & 0x1);
template <typename T, T N>
struct static_number_of_ones<T, N, 0>
static const T m_value = N;
static const unsigned long m_count = 0;
template <typename T, T N>
struct static_is_power_of_2
static const bool m_result = (static_number_of_ones<T,N>::m_count == 1);
template <unsigned long N>
struct static_number_is_power_of_2
static const bool m_result = (static_number_of_ones<unsigned long, N>::m_count == 1);
int main(int argc)
int ret = 0;
if (argc > 1)
ret += static_is_power_of_2<unsigned short, 16>::m_result;
ret += static_is_power_of_2<unsigned int, 16>::m_result;
ret += static_is_power_of_2<unsigned long, 16>::m_result;
ret += static_number_is_power_of_2<16>::m_result;
else
ret += static_is_power_of_2<unsigned short, 17>::m_result;
ret += static_is_power_of_2<unsigned int, 17>::m_result;
ret += static_is_power_of_2<unsigned long, 17>::m_result;
ret += static_number_is_power_of_2<17>::m_result;
return ret;
Compiation:
@ CC -m32 foo5.cpp
// No problem
@ CC -m64 foo5.cpp
"foo5.cpp", line 20: Error: An integer constant expression is required here.
"foo5.cpp", line 36: Where: While specializing "static_is_power_of_2<unsigned long, 16>".
"foo5.cpp", line 36: Where: Specialized in non-template code.
"foo5.cpp", line 26: Error: An integer constant expression is required here.
"foo5.cpp", line 37: Where: While specializing "static_number_is_power_of_2<16>".
"foo5.cpp", line 37: Where: Specialized in non-template code.
"foo5.cpp", line 20: Error: An integer constant expression is required here.
"foo5.cpp", line 43: Where: While specializing "static_is_power_of_2<unsigned long, 17>".
"foo5.cpp", line 43: Where: Specialized in non-template code.
"foo5.cpp", line 26: Error: An integer constant expression is required here.
"foo5.cpp", line 44: Where: While specializing "static_number_is_power_of_2<17>".
"foo5.cpp", line 44: Where: Specialized in non-template code.
4 Error(s) detected.
Predefined macro:
@ CC -m32 -xdumpmacros=defs foo5.cpp | & tee log32
@ CC -m64 -xdumpmacros=defs foo5.cpp | & tee log64
@ diff log32 log64
7c7
< #define __TIME__ "09:24:58"
#define __TIME__ "09:25:38"20c20
< #define __sparcv8plus 1
#define __sparcv9 1[snipped]
=========================
What is wrong?
Thanks,
Alex Vinokur

Bug 6749491 has been filed for this problem. It will be visible at [http://bugs.sun.com] in a day or two.
If you have a service contract with Sun, you can ask to have this bug's priority raised, and get a pre-release version of a compiler patch that fixes the problem.
Otherwise, you can check for new patches from time to time at
[http://developers.sun.com/sunstudio/downloads/patches/]
and see whether this bug is listed as fixed.

CS4 Problem with Template Updates

There's another thread on this subject, but I couldn't see any final resolution.
I'm having a problem with Template Update.
I have all pages in site linked to a single template. I built the template 1st and then created each page from the template using normal method.
When I now make a change to the template, I save the template and it automatically saves and opens a box to select pages to update. I do NOT have to use the Updates feature on the top menus, but I have done that too just to try different things. When I select all the files, it updates them all, most of them correctly. BUT, one or several of them will have a NEW Main Content (and sometimes header) superimposed on top of the existing Main Content (or header). It shifts the page downward and to the right. By the way, down below the screwed section, the content is all still there and the original template is still intact under the screwed up area.
To fix it, I create a new page from the template and start over inserting the Main Content, which is nothing special, just formatted text. Next time I update, that same page will always get screwed up again, but sometimes 1 or more different pages will also get screwed up in the same way, always with a new nested Main Content area (on top of the original or sometimes pushed down half a page).
I thought it might be because of a nested Main Content in that section of the template, but I see none, or any other abnormal html. It does not do this to all 20-30 pages, just one every time and one or more random ones. I see nothing in html different from one page to the next.
Don't know how to attach documents to this, but I have the template and two of the screwed up pages to send.
Charlie
[email protected]

The site is http://www.michaelchekhov.net
Public directory is /public_html, but that's the root, so the links below should work.
These pages are out of their normal directory, so the supporting links won't work, but you can see the code. Look at the home page and you can see what all the pages are supposed to look like.
The template which created the problem with the pages below is at /support/TEMPLATE index.dwt
The page that consistently fails is called poatool.html - the bad one is at /support/BAD poatool.html
A 2nd page that failed on that UPDATE is there also - /support/BAD bibliography.html
The currently working copy of the page that fails everytime is /articles/poatool.html.
Thanks.
Charlie

Problem with templates in Dreamweaver...

I'm using Dreamweaver 8 and here is my dilema... Originally I
had my
template named something different. I changed the name of the
template and
now my other pages that run off that template wont work
because of this
code...
<html>
<head>
I obviously changed the name of the template so it is no
longer index2.dwt.
The problem is is that this code doesn't actually show up in
the template
itself it shows up in the pages that are using that template.
I want to
know how I go about changing this bit of code in all my pages
that use the
template without having to do it by hand. There must be an
easy way?
Thanks!
Chris Jumonville

Good luck!
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Chris Jumonville" <[email protected]> wrote in
message
news:[email protected]...
> Murray,
>
> Nope, I messed up. I accidently changed the name of the
file without
> doing it in Dreamweaver so that is my fault. Thanks for
the useful
> information about the find and replace feature. I didn't
know it would be
> able to do it in the template is the files were closed.
I think I tried
> it while they were open and that is why it didn't work.
Easy fix and I
> just took care of it! Thanks!
>
> -Chris
>
> "Murray *ACE*" <[email protected]>
wrote in message
> news:[email protected]...
>>> I did try remanimg the template from index2.dwt
to my new template name
>>> and for some reason Dreamweaver didn't handle
the rest.
>>
>> Did you do this by selecting the file in the Files
panel, and renaming it
>> there? DW will handle the link management if you do
that.
>>
>>> I didn't know if the find and replace feature
would work since that code
>>> in all the pages using the template is locked...
>>
>> If the file is closed, DW will change the code, even
in locked regions.
>>
>> --
>> Murray --- ICQ 71997575
>> Adobe Community Expert
>> (If you *MUST* email me, don't LAUGH when you do
so!)
>> ==================
>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>> ==================
>>
>>
>> "Chris Jumonville" <[email protected]>
wrote in message
>> news:[email protected]...
>>> Murray,
>>>
>>> I did try remanimg the template from index2.dwt
to my new template name
>>> and for some reason Dreamweaver didn't handle
the rest. I use templates
>>> alot so I think it may just have been a glitch
and maybe I just needed
>>> to close and restart dreamweaver because now
it's working fine. I
>>> didn't know if the find and replace feature
would work since that code
>>> in all the pages using the template is locked...
>>>
>>> -Chris
>>>
>>> "Murray *ACE*"
<[email protected]> wrote in message
>>> news:[email protected]...
>>>>> There must be an easy way?
>>>>
>>>> There are several ways to do this, but the
easiest would be to close
>>>> all files in DW, and then do a sitewide
search to find
>>>> "/Templates/<name>.dwt" and replace it
with "/Templates/index2.dwt".
>>>>
>>>> You could also just rename (using the files
panel) the template from
>>>> "/Templates/index2.dwt" to
"/Templates/<name>.dwt", and let DW handle
>>>> the details.
>>>>
>>>>
>>>> --
>>>> Murray --- ICQ 71997575
>>>> Adobe Community Expert
>>>> (If you *MUST* email me, don't LAUGH when
you do so!)
>>>> ==================
>>>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>>>> ==================
>>>>
>>>>
>>>> "Chris Jumonville"
<[email protected]> wrote in message
>>>> news:[email protected]...
>>>>> I'm using Dreamweaver 8 and here is my
dilema... Originally I had my
>>>>> template named something different. I
changed the name of the
>>>>> template and now my other pages that run
off that template wont work
>>>>> because of this code...
>>>>>
>>>>> <html>
>>>>> <head>
>>>>>
>>>>> I obviously changed the name of the
template so it is no longer
>>>>> index2.dwt. The problem is is that this
code doesn't actually show up
>>>>> in the template itself it shows up in
the pages that are using that
>>>>> template. I want to know how I go about
changing this bit of code in
>>>>> all my pages that use the template
without having to do it by hand.
>>>>> There must be an easy way?
>>>>>
>>>>> Thanks!
>>>>> Chris Jumonville
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>

Problem with template and ie

I'm running through a weirg problem here. I've designed my webpage and everything worked fine in chrome , firefox and explorer 8. So I saved it as a template and created a basic page with it (normal html/css here, very simple). The probleme is that now, everything is messed up but only in explorer (page not centered, big empty space added somewhere). And then, when I remove the editable regions markers (   ...) and save it back as a normal html page without templates, it is working fine again.
Can someone help me please?
Thanks!

I'm running through a weirg problem here. I've designed my webpage and everything worked fine in chrome , firefox and explorer 8. So I saved it as a template and created a basic page with it (normal html/css here, very simple). The probleme is that now, everything is messed up but only in explorer (page not centered, big empty space added somewhere). And then, when I remove the editable regions markers (   ...) and save it back as a normal html page without templates, it is working fine again.
Can someone help me please?
Thanks!

CS3 AE: Problem with Template!

I purchased a set of templates for After Effects…they appear to be precisely what I need what there is a strange problem.
There are 14 slots on the timeline but number one repeats! The first image repeats at around 32 seconds...thus creating 15 images total. I have been struggling for two days with this...I assumed that I had inadvertently done something to the template. However, I played the preview video and it does the same thing! The template is perfect for my needs but the repeating image is totally frustrating. To state the problem another way…what image you put in the first slot repeats at about 32 seconds. I suppose I could just chop the end off but that would mean throwing away 25% of the template. And besides, I am just too darned stubborn to give up.
I am less than an expert with AE...I have tried looking in the flowchart to see if I can figure out what is happening but with no luck.
If you could look at this I would you my every lasting thanks:
Instructions: http://www.box.net/shared/19aern6tg585431svnhf
Template: http://www.box.net/shared/ydvp6i26u4ldarzry6v6
Preview: http://www.box.net/shared/jksk51kyu9qg5vikf5ac
These do not contain viruses…but you may want to run your AV on them to be sure.
Thank you. Thank you.

The first thing to do is look at the Edit Comps Image 01 in the Project Panel. You'll see that it's used 2 times. Right click on the comp and it will reveal the two comps that it's used in.
Now check out layer 7 in the Comp1 precomp. That's where all of the animation takes place. There's the second copy of the pre-comp where image 1 is used. There's an error in the template. You could easily fix it by duplicating one of the Image precomps and dropping a new image in it, then replacing Image one in Image 01 Precomp Final 2.

Problem with Web Dynpro Theme in 2004s ABAP Sneak Preview

Hi !
Working on the Web Dynpro for ABAP 2004s Sneak Preview
I encountered a problem in applying a web Dynpro theme
via the URL-parameter sap-cssurl.
I tried the following URL:
http://hostname:8000/sap/bc/webdynpro/sap/webdynproapp?sap-cssurl=http://hostname:8000/sap/public/bc/ur/nw5/themes/sap_hcb
But it didn't work ?!
Could anybody tell me what went wrong ?
Thanks in advance,
Frank

Hi Frank,
Try this
1. Set all dynpro's to run with portal theme whether you run them inside/outside portal.
For this, run visual administrator -> server -> configuration adapter -> (change mode) -> webdynpro -> sap.com -> tcwddispwda -> Propertysheet.default
set the parameter sap.theme.default to your portal theme path: we've theme CustomerTheme (portal is nw04sr1 sp14) and theme url is as follow:
/irj/portalapps/com.sap.portaldesign.urdesigndata/themes/portal/CustomerTheme
2. call individual application with parameter to use portal theme as follow:
http://<portal hostname with domain>:<port>/webdynpro/dispatcher/local/WD_Project/Applname?sap-cssurl=http://<portal hostname with domain>:<port>/irj/portalapps/com.sap.portal.design.urdesigndata/themes/portal/CompanyTheme
Hope it helps...
Lokesh

Problems with template and page links..

Hello community!
I'm pretty new to dreamweaver Cs4 and am having a slight problem. I have my template.dwt file and 5 other pages which use this template layout. However when I preview my website in my browser, the template.dwt file links to all the pages, however when I click on another link (a page link) once on this page, the hyperlinks from the navigation cant be clicked. In other words the navigation turns into just text and no hyperlinks.
I want to be able to click on any page on my website using the navigation bar, so i can go back and forth onto pages all over my website using my navigation.
Anyone know what to do or a solution to allow me to have all the links working from the template
Thanks

You are being confused by a) not understanding root relative vs document
relative links, and b) not understanding how DW previews files.
If I have a document with a link to an image that looks like this -
<img src="/images/foo.gif"...
That's what's called a root relative link.
If I preview that document in DW, then the browser gets the document, sees
the leading "/" and reads that as the root of the hard drive, since the
browser has no idea where the root of the site is. Thus, the image is
broken in the preview.
If I have temp files enabled, then DW will secretly convert the file being
previewed into a temporary file, and hand that to the browser. This temp
file has had all root relative links converted to document relative links
(as you will see by looking at the code in the browser), and has had all
include files actually embedded in the page, and has had all external CSS
and js markup embedded in the page. In other words, DW has made the
document into a stand-alone page.
If you do not have temp files enabled, all of these links would be broken on
preview.
Now - if you are using root relative links, AND you have temp files enabled,
AND you click away from the previewed document, then all of your links will
be broken, since DW has not made that linked file into a temp file. This is
what you are seeing.
So - if you want to click away on preview, then you must use document
relative links for the site -
<img src="../images/foo.gif"... (for example)
These will still work on preview since the browser knows how to determine
the current file's location and how to follow that path.
GEDDIT?

Problems with template working but not working...

Ok, so I have a template I’m using in Dreamweaver 8
– it’s working out well, with 3 editable regions, and
I'm using a couple of stylesheets as well. Unfortunately
something’s happened to the template though – I’m
able to apply it to all my pages, but within DW itself the template
is showing up as being unstylized.... you know how a page looks
when it doesn’t have a stylesheet attached – that plain
white and black? That’s how my template (and all my pages
which use the template) looks
*within* DW. If I open up the HTML files created from the
template, they'll show up fine in Firefox or Safari - but from
within Dreamweaver itself it's like it's not recognizing the
stylesheet in a way. The path is there correctly - just some how my
template is getting in the way :(
Has this happened to anyone? Any ideas on how to rectify it?
I've got a main stylesheet attached (globalstylesheet.css) but I've
never had this problem before. Help!

Hi Murray,
thanks for posting. Yes, I usually just do a child from the
template and cut and paste - would that be why the template got
screwed up.
This is really frustrating me, since the joy of DW is the
ability to view the code AND the WYSIWYG panel at the same time -
but I have no such luck right now... help!
Here is my template:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Strict//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<head>

<title></title>

<meta http-equiv="Content-Language"
content="English" />
<meta http-equiv="Content-Type"
content="text/html; charset=UTF-8" />
<link href="../globalstylesheet.css"
rel="stylesheet"
type="text/css" />
</head>
<body>
<div id="wrap">
<div id="header">
<h1>Rachel M. Murray User Experience
Design</h1>
<h2>at the intersection of business design and
technology is good user experience</h2>
</div>
<div id="navigation">
<ul>
<li><a
href="../welcome.html">welcome</a></li>
<li><a
href="../who.html">who</a></li>
<li><a
href="../work.html">work</a></li>
<li><a
href="../write.html">write</a></li>
<li><a
href="../sitemap.html">where</a></li>
</ul>
</div>
<div id="content">
<div id="right">
</div>

<div id="left">
<div class="menutop">
</div>
<div class="menumiddle">
</div>
<div class="menubottom">
</div>
</div>

<div style="clear:both;">
</div>
</div>
<div id="footer">
&nbsp;&nbsp;&nbsp;<img
src="../images/tinylogo.gif" alt="tiny
logo" width="16"
height="18" align="top"
/> <span
class="footertext">Copyright
&copy; 2007 and beyond Rachel M. Murray User Experience
Design. All Rights Reserved.
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp ;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp ;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp ;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp ;&nbsp;&nbsp;&nbsp;&nbsp;Revised
from a design by <a href="
http://www.minimalistic-design.net/"
target="_blank">Minimalistic
Designs</a></span></div>
</div>
</body>
</html>
any help is appreciated - thanks...

Problem with .docx files and Office 2004

After the upgrade to Snow Leopard, I now am receiving a message "There is not enough memory or disk space to convert." when I try to open a Office 2007/2008 docx file. The error does not happen on all docx files, but only on files over 100kb. The same files that do not work now, all worked prior to upgrading to Snow Leopard. I am using a fully patched Office 2004 (11.5) in addition to the open XML compatibility software 1.1.1 from Microsoft. I have removed all error and duplicate fonts and repaired disk permissions.
I have looked on both Apple and Microsoft for an answer, but nothing except Microsoft claiming Office 2008 will work seamlessly with Snow Leopard.

I just came across this problem too. Very frustrating. I just got this new MacBook Pro last week (so I'm using Snow Leopard too). I installed Office 2004, updated it to 11.5, and installed the open XML conversion software, but no dice. I absolutely should have plenty of memory and disk space to do any docx conversion.
Also, I'm only trying to convert a 20KB docx file, so large file size isn't an issue here. And my copy of Office 2004 is totally legit, in case that's a question.
I really need to be able to open docx files for work, so this is a real problem for me. Help me, Apple-wan Kenobi!
Message was edited by: juliamontgomery

Problem with printing checks from quicken 2004 - using Vista (32bit) and Officejet J6480

I have used my quicken 2004 version with my old XP with no problems and HP officejet J6480 All-in-One. Just got a new computer and everything was going great until I went to print checks - it prints one line and then stops printing. I assume the problem is with the Vista - is the Quicken 2004 too old?

Hi , Welcome to the HP Forums! I noticed that you cannot print checks with Quicken, when using your HP Officejet Pro 6830e all-in-one on iOS. I am happy to take a look into this issue for you! Some questions for you: What version of iOS are you using? If you do not know the Operating System you are using, please visit this website. Whatsmyos.What happens when you try to print in TextEdit?Are you able to make copies with the printer? Copying Documents.Have you uninstalled the old printer software, and installed the software for your new printer? Once I know these answers, I will do some further research for you! Thank you for posting! “Please click the Thumbs up icon below to thank me for responding.”

Word document does not open - problem with template

I have a share point folder synced to my computer. I have repeatedly trouble opening word documents that have been created based on a specific word template (.dotx). In those cases, when I open the document in my local synced folder Word opens and
the bottom border of Word indicates that it is "Opening" the template file. This process never seems to complete and Word must be closed through Ctrl-Alt-Del. Suggestions would be appreciated.

Hi AlexBXL，
DOTX files use the newer Open XML-based Word document format, which was introduced in Microsoft Office 2007. They can opened in Microsoft Word 2007 or previous versions of Word with Open XML component support.
You can open the DOTX files with Microsoft Word 2007 or previous versions of Word. Or you can convert the documents to the Word 2013 mode.
Here is an article about using Word 2013 to open documents created in earlier versions of Word, you can use as a reference:
https://support.office.com/en-sg/article/Use-Word-2013-to-open-documents-created-in-earlier-versions-of-Word-609bbdba-96f2-407b-baaf-d8e53d60d34f?ui=en-US&rs=en-SG&ad=SG
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

Problems with duplex printing in Office 2004

My computer is a Mac Pro with the latest version of Leopard. My printer is an HP Laserjet 2420dn. One of its important features from my perspective is its two-sided printing feature. The two-sided feature works with PDF documents and Iwork "pages" documents but for it does not work with Word documents (Office 2004). In the case of the Word documents, the two-sided feature is listed as "off" and no box appears in the print pop-up for "two-sided." Obviously this is not correct as in system preferences, "duplex" is checked as on and of course it is working with other programs. Anyone have any ideas as to what might be going on here with word and duplex printing???

Hi Patricia,
We are using the same white paper 'How to web printing' and it is helping us a lot. We are also working on BW3.5. Without this enhancement, our reports were not printable at all.
Please let me know, if you need more information. Thx. Praveen

Problems with templates in DW MX 2004

Similar Messages

Maybe you are looking for