Problems with the Firewire Hub at a Cinema Display

The Firewire Hub on my "23 inch Apple Cinema HD Display" doesn't work when connected to my "Power Mac G5 DualCore 2,3 Ghz Double Lay" - the hub works when connected to a Mac mini (or before to a G4 867). The Firewire-Port at the G5 works, too. Who can help me?

There seems to be not as much power at the monitor ports, use the main ports instead.
Dont forget to clone that boot drive occassionally
http://homepage.mac.com/hogfish

Similar Messages

Color problems with duo monitor (MPB and 24' Cinema Display)

I have a new 24' Cinema Display attached to my 15' macBook pro 2.66 (not the new one with the SD slot) and I keep getting weird colors on the MBP display.
Here is a screengrab from the MBP. The main display is fine. What is my MBP screen experiencing?!
http://www.madreview.com/images/screengrab.jpg
You can ell the colors are off on Tiger Woods on the bottom and on the background. Please help.

If I may jump in, I have almost the same question and would like to clarify the Cmd-F1 suggestion. (I'm looking at buying the 24" LED for my slightly older MBP with max resolution 1440x900.) If one runs this monitor in extended desktop mode, you can reach the max resolution for the monitor, if I understand correctly, but is some of your "desktop" then spread across your built-in MBP LCD? That's less useful than having the entire 24" available for keeping multiple windows open.
Just want to understand whether this is really worth it! Thanks, and PMFJI.

It seems my issue was with the Firewire connection with the

I am having an issue with my Ipod and 20inch display firewire connection. (as long as the Firewire connection went directly into the PowerMac, I have no issue.) But when I am using the display firewire connection, wont connect. So I have to use the USB connection on the display for my music transfer.... This is a brand new display and powermac which I got today.
It seems my issue was with the Firewire connection with the Cinema Display.
Can anyone help

Same problem here. I can sync the audio files without problem, but when it starts syncing my photos (on a mac 2.7ghz g5 with 20" cinema) i get a "required file not found" error. This only happens when the ipod is connected to the cinema firewire port, not direct to the back of the g5. when i connect to the back of the g5, i get no errors.

Problems with the Fios 20/5 connection speed in my area dropping down to less than 3mbs.

I have written out a flyer that I plan to go door to door with. Since I am under contract with Verizon, I am forced to honor my side of the contract. Even if they are allowed to make me pay for a service that I am not completely getting. I am very displeased and as soon as my contract is up, I will change back to My local cable companies all in one that does not require a contract and has no issue such as the one I am having.
Do you have Verizon Fios Internet?
Are you on the 20/5 connection?
If so, you may not be getting the speed you are paying for. I am on a 20/5 connection and when my computer is on for longer than an hour the internet download speed with Verizon Fios starts to slow down until it is below 3mbs. It takes about 24 hours to get down to 3mbs but only about an hour or two to get down to about 6-7mbs when I am paying for 20mbs…
I have 3 computers in my home that have Windows Vista, Windows XP home edition and Windows Media Edition 2005. All of the computers run into this same exact issue, I have tried every setting I could think of with my 24 years of computer technical experience. I finally took one machine with Windows XP and ran a full format on the hard drive and reinstalled a fresh Windows Xp Operating system onto the hard drive so it is a bare bones OS. This way there is no other software on the machine that could possibly be causing the problem and found that when I connected online through Verizon Fios the machine still ran into the same exact issue. This proves to me that the issue is not on any of my machines.
Now all of this time my buddy that lives 1.2 miles away from my house has been having the same issue with three computers at his home also. He has Windows Vista on two machines and Windows XP Pro on one.
When I concluded that it was a Verizon Fios issue, after a few months of trying to get by, researching, diagnosing and losing much information in order to verify it was on Verizon’s side, I contacted technical support at Verizon’s online website. The agent and I went through the regular procedure that anyone would have to go through and I patiently explained what I had done to try to diagnose the issue. The agent came to the conclusion that he could not figure out the problem so he guessed that the Verizon router/modem may be the issue and told me he would send me a new one by mail.
I received the new Verizon router/modem, installed it and had to call to have it activated. Afterward it still had the same exact issue as the prior router/modem. So now we know it’s not my computers, it’s not the router/modem. My Verizon router/modem is connected right at the Optical Network Terminal (ONT), which is the box that connects the fiber-optics to your home, usually just inside or outside your garage wall. Mine is just outside…
From here my buddy, who has been having this problem also the entire time, called the local office of Verizon Fios and an installer was setup to come over to his home and trouble shoot the issue. My buddy called me and told me when the installer was headed to his home and I met him at his home to see what the installer found and in hope that my issue would be fixed at the same time. The installer went through the system at his house and was frustrated about not finding the reason for the issue and ready to leave without fixing anything. I simply asked that he stay long enough to see the issue present itself within an hour-hour and a half.
His laptop itself already showed the speed drop from 20mbs to between 16-17mbs, it was on its way down. He basically told us something that online tech support already stated to me, it is extremely difficult to prove it is on Verizon’s side. In other words it is extremely difficult to prove it, in a way that will convince Verizon to check its own servers, routers and software updates to their own systems. The installer, good guy, couldn’t/wouldn’t stay but we did convince him not to simply drop the issue. He called shop and they sent another installer out to take over the issue.
The new installer, great guy, got up to speed on what was already done at my buddies home. The first installer, checked and replaced the Verizon router/modem, checked the wiring and splitters. Basically went through the entire system up to the Optical Network Terminal (ONT), the box that connects the fiber-optics to your home. He pulled and replaced the Optical Network Terminal (ONT), thinking that perhaps the unit was compromised. While he was doing this job a tech was called and asked to stop by for assistance with the issue. The tech checked the computers inside and tried to do some settings that the main office informed him to try. I explained to the tech that the same issue was happening at my house, that I went through every setting I could think of and find online to help alleviate the issue. After some shop talk about what I had tried, including the full format and reinstall of the operating system on one of my machines, he just as I came to the conclusion that it couldn’t be with the computers and since everything that had to do with the Verizon Fios system from the street to the end-user computer had been checked, verified and/or replaced, the issue had to be coming from Verizon’s main office.
The installer had already checked the main at the road that has the 3x2 green service cover on it by the side walk. Everything was in good working order. The tech called the main office to see if my buddy and I were on the same hub, basically a big splitter that continues the service from the main office to the homes, we were not. So that was ruled out…
My understanding of the system ends there. The only other components I know of are the Main branch’s routers, servers and software.
Verizon had a new connection speed added to their system, 25/15 about the same time our issue began. So I am guessing that when they updated the system to include this new connection speed they corrupted the software for the 20/5 connection.
We have been waiting to hear from the tech that was at my buddy’s house, to see if the issue will be dealt with. My buddy has called him a couple of times and he has mentioned that he is trying to get it addressed and to call back if we hadn’t heard from him. He remembered who he and I were and what the issue was, so I believe he is taking it seriously. How far he can move the issue is beyond me…
I want to add that my buddy and I have been customers with the all in one package from Verizon Fios since their services have moved into our area, about a year and a half… It has only been since about June that this issue has presented itself, before then we were on 7th heaven with the speeds. We couldn’t have been more than happy with the services.
This issue has caused that to all go afoul, not only do the speeds get down to less than 3mbs but the speed is not smooth at all. Rather the 3mbs speed is stop and go, freezing in between at times, very choppy. Barely usable at times, unless you restart the computers and start over.
We are hoping that anyone with Verizon Fios Internet Services will keep an eye on their speeds by going to http://speedtest.net and doing tests to verify they are getting the speeds they are paying Verizon for.
This is what it will take for Verizon to take this issue seriously is to gather everyone on the system that may be having the same issue. I believe it is everyone that is within the 1.2 miles from my house to my buddy’s and will distribute flyers to each and every house in between.
If you find that your speed is not as fast as it should be please contact me and I will add you to the list, this way we can see exactly how far this problem covers and perhaps it will also help to show a pattern and understanding as to why the issue is present in the first place.
My contact information,
I have left this out here, you can contact me on these forums...

Actually what this came down to was an issue between Windows Vista and an Ethernet Card on one of the machines in each of our local networks.
Even though our two machines are 6 years apart, we both have the same ethernet adapter on our main desktops. A RealTek RTL8139/810x Family Fast Ethernet Nic. It seems that the adapter does not work at the 20mbs download speeds with Vista. For some reason the adapter does not shut down when the computer does? I don't understand why but it doesn't, it keeps the connection alive. I removed the ethernet cable and pulled the power cable and had my two other computers still connected to the network and found that the issue was resolved. The way I found out was that I used the connections on my main computer to hook up one I had laying around and through further testing found the problem no longer existed...
Then I realized that my buddy and I installed Windows Vista at about the same time, a couple of months ago. Funny how you can forget an important detail like that. Then I remembered that he had the same identical ethernet adapter as I did, I had noticed that while trouble shooting his computer at his home but didn't think it was important at the time. Until the issue was narrowed down to the adapter, then it all seemed to all fall into line.
Quite humbling... In the end, anyone who has Windows Vista and this NIC probably will have problems with the 20mbs download speed of the computers on their own networks. I tried the latest Vista driver from RealTek and also tried to roll back the driver, with no success....
Back at the beginning when we first had fios installed in our homes there wasn't an issue when we had the 10/2 speeds and had Vista. Then we decided to change from Vista to XP because we both were having issues as to what programs you could use and which you could not, shortly after having fios installed. Then when verizon upgraded us to 20/5 we were amazed at the speed and still had no issue because we had XP on our main computers with the RealTek adapters...
We reinstalled Vista because it seemed like we were having more issues with XP by getting hit with Antivirus2008 and its variants and thought it time for a change back...
It didn't really hit us that Vista could be the culprit because we both have a laptop in our networks that have had Vista on them from the get go when there were no issues... We also didn't notice just how bad it was right away and over time kind of left the Vista install out of the equation.
Just strange that one computer can effect all the other computers on the network, even when it is shut down...
I allowed the other two computers to run 24hours and the issue did not present itself, when I added the main computer with the RealTek adapter back to the mix it reappeared. The Realtek adapter is the only real common denominator between his machine and mine.
So now we have three choices,
We can go back to Windows XP.
We can buy a new NIC or a wireless card to replace the RealTek...
Hopefully this post will help anyone else who runs into this problem, it has been very frustrating to say the least...
Thanks to everyone for their help and I apologize for complaining about verizon when it was not a verizon issue. I came to the conclusion that the only part verizon really played was upgrading us to a 20/5 tier which I am thankful for...
Would be nice if this card was on a list that Verizon support could use to troubleshoot , diagnose or eliminate for future support issues.
Message Edited by keiser0619 on 08-06-2009 03:58 PM

2 Problems with the Ipad Air...midi keyboard and usb microphone

IN SHORT:
2 Problems with the Ipad Air...what midi keyboard will connect to the lightning camera connector and what microphone as well? There seems to be issues with the ipad air not being able to power them. Has anyone got any devices to work yet?
IN DEPTH:
I have a yeti microphone that when I plug in it says its using too much power. A little samsung go mic I have plugs in find and works but isnt quite what im looking for. My midi keyboard is not reading...its probably 15yrs old (didnt expect it to work). I have ordered a usb powered keyboard but im now nervous it may not work if it requires too much power. Has anyone had any success with a particular model of keybaord? I saw a youtube video of the CME Xkey in which it was plugged into an ipad that uses the lightning jack, but was unsure if it was the air or a different model.
Any help is appreciated on this...I love my ipad air and hoping to make it my fully functional music recording device.
By the way I mostly use garageband

hey mate
Yes what I ended up doing is buying a powered usb hub. They are about 10 dollars or so on amazon.com. There are tons to choose from. I use a yeti micrphone now with no issues and a midi keyboard. You will need the lightning usb adapter too. You plug the lightning adapter into the ipad and the hub into the adapter then plug all your accessories into the powered hub. So it works well you just gotta buy an extra piece of equipment.

Problems with the ipod

I have already researched this problem to the max, so any other suggestions are welcome, but I have already read all the discussions on it as well as the Apple Documentation. I am coming here on the off chance someone knows soemthing and so I can document for the benefit of other ipod users.
I get "Disk cannot be read from or written to" when trying to synch ipod. The error message does vary a bit.
I have seen other users referred to this artile.
http://docs.info.apple.com/article.html?artnum=301267
This documentation is pretty useless as it says that everything can be wrong.
So far I have restored my ipod many times, formatted it for windows, checked it for errors in windows, updated my ipod software, updated itunes, tried various methods described all to no avail. It is not a problem with a specific file because I have tried transferring only 100 out of the 2500 files in my collection to no avail.
I will try updating my ipod from a different computer with a different library of music later tonight. So far I have not had access to a computer with a firewire drive so that I can make sure it's not a problem with the USB cord or interface.
Suggestions are welcome! If updating it with another comp does not work I guess I'll try to use the ipods warranty. If that doesn't work I'll try to replace the harddrive myself.

I have already researched this problem to the max, so any other suggestions are welcome, but I have already read all the discussions on it as well as the Apple Documentation. I am coming here on the off chance someone knows soemthing and so I can document for the benefit of other ipod users.
I get "Disk cannot be read from or written to" when trying to synch ipod. The error message does vary a bit.
I have seen other users referred to this artile.
http://docs.info.apple.com/article.html?artnum=301267
This documentation is pretty useless as it says that everything can be wrong.
So far I have restored my ipod many times, formatted it for windows, checked it for errors in windows, updated my ipod software, updated itunes, tried various methods described all to no avail. It is not a problem with a specific file because I have tried transferring only 100 out of the 2500 files in my collection to no avail.
I will try updating my ipod from a different computer with a different library of music later tonight. So far I have not had access to a computer with a firewire drive so that I can make sure it's not a problem with the USB cord or interface.
Suggestions are welcome! If updating it with another comp does not work I guess I'll try to use the ipods warranty. If that doesn't work I'll try to replace the harddrive myself.

Problems with the USB Ports

Hi there,
I writing this because I'm having some really big problems with my USB ports.
A few days ago I plugged in an USB-Hub that was quite cheap. Suddenly a window popped up saying that a USB device was deactivated because it "needed" to much power. Since this happening, two of those windows keep popping up everytime I boot the MacBook. I called Apple and got some help: I had to delete some .plist files and clear some caches. The man who helped was able to find the error and deactivate the notification, he also told me to make a PRAM- and a SMC-reset. The man said that it's just a software problem and that I have to reinstall the system if we don't find a solution. So, one day later I reinstalled the system (Lion) and not only didn't it help, the two notification windows were popping up again...everytime I booted the Mac. So I decided to formate the whole hard drive and install Snow Leopard -> still the problem with the USB ports. After that I installed Lion -> still the problem with the USB ports. I even tried to extract the .kext files that are important for the USB functionality from an earlier Combo Update, but it didn't help either. The point is, that the Mac doesn't recognize my external hard drive or any of my iDevices. Sometimes it recognizes USB sticks, but only after 20 seconds. The data transfer on both USB ports is also very slow. If I'm lucky and Mac recognizes one of my USB sticks, it takes like an hour for 1GB to be transfered on the USB stick or from the USB sticks to the Mac.
I really don't know what to do and need help, especially because my backup data is on my external hard drive which I can't access because of this problem.
I really hope that someone can help me, I'm very thankful for every answer that could help me!
PS: Sorry for my bad English, I hope that everyone understands what I mean, please tell me if you don't get what I'm trying to explain in the text above.
Sincerely,
iLoud
[UPDATE] I downloaded "USB Prober" and copied the Output file, maybe it helps:
Timestamp Lvl            Message
    0.698 [3]          AppleUSBHub[0x5076c00]::DecrementOutstandingIO(7316), outstandingIO(0), _interruptReadPending(false) - rearming read
    0.698 [3]          AppleUSBUHCI[0x4f97000]::UIMCreateInterruptTransfer - root hub interrupt transfer - clearing unneeded memDesc (0x5073080) from dmaCommand (0x506a100)
    0.735 [3]          AppleUSBUHCI[0x4f97000]::UIMAbortEndpoint - endpoint 1:1,1
    0.735 [3]          AppleUSBUHCI[0x4f97000]::RHAbortEndpoint - Interrupt pipe - noting status change
    0.735 [3]          AppleUSBHub[0x5076c00]::InterruptReadHandler error kIOReturnAborted (expected)
    0.739 [2]          AppleUSBUHCI[0x4f97000]::HandleInterrupt - Host controller resume detected - calling EnsureUsability
    0.739 [2]          AppleUSBUHCI[0x4f97000]::HandleInterrupt - deferring further processing until we are running again
    0.761 [3]          AppleUSBHub[0x5076c00]::DecrementOutstandingIO(7320), outstandingIO(0), _interruptReadPending(false) - rearming read
    0.761 [3]          AppleUSBUHCI[0x4f97000]::UIMCreateInterruptTransfer - root hub interrupt transfer - clearing unneeded memDesc (0x5073080) from dmaCommand (0x506a100)
    0.798 [3]          AppleUSBUHCI[0x4f97000]::UIMAbortEndpoint - endpoint 1:1,1
    0.798 [3]          AppleUSBUHCI[0x4f97000]::RHAbortEndpoint - Interrupt pipe - noting status change
    0.798 [3]          AppleUSBHub[0x5076c00]::InterruptReadHandler error kIOReturnAborted (expected)
    0.801 [2]          AppleUSBUHCI[0x4f97000]::HandleInterrupt - Host controller resume detected - calling EnsureUsability
    0.801 [2]          AppleUSBUHCI[0x4f97000]::HandleInterrupt - deferring further processing until we are running again
    0.823 [3]          AppleUSBHub[0x5076c00]::DecrementOutstandingIO(7324), outstandingIO(0), _interruptReadPending(false) - rearming read
    0.823 [3]          AppleUSBUHCI[0x4f97000]::UIMCreateInterruptTransfer - root hub interrupt transfer - clearing unneeded memDesc (0x5073080) from dmaCommand (0x506a100)
    0.860 [3]          AppleUSBUHCI[0x4f97000]::UIMAbortEndpoint - endpoint 1:1,1
    0.860 [3]          AppleUSBUHCI[0x4f97000]::RHAbortEndpoint - Interrupt pipe - noting status change
    0.860 [3]          AppleUSBHub[0x5076c00]::InterruptReadHandler error kIOReturnAborted (expected)
    0.863 [2]          AppleUSBUHCI[0x4f97000]::HandleInterrupt - Host controller resume detected - calling EnsureUsability
    0.863 [2]          AppleUSBUHCI[0x4f97000]::HandleInterrupt - deferring further processing until we are running again
    0.885 [3]          AppleUSBHub[0x5076c00]::DecrementOutstandingIO(7328), outstandingIO(0), _interruptReadPending(false) - rearming read
    0.885 [3]          AppleUSBUHCI[0x4f97000]::UIMCreateInterruptTransfer - root hub interrupt transfer - clearing unneeded memDesc (0x5073080) from dmaCommand (0x506a100)
    0.922 [3]          AppleUSBUHCI[0x4f97000]::UIMAbortEndpoint - endpoint 1:1,1
    0.922 [3]          AppleUSBUHCI[0x4f97000]::RHAbortEndpoint - Interrupt pipe - noting status change
    0.922 [3]          AppleUSBHub[0x5076c00]::InterruptReadHandler error kIOReturnAborted (expected)
    0.926 [2]          AppleUSBUHCI[0x4f97000]::HandleInterrupt - Host controller resume detected - calling EnsureUsability
    0.926 [2]          AppleUSBUHCI[0x4f97000]::HandleInterrupt - deferring further processing until we are running again
    0.947 [3]          AppleUSBHub[0x5076c00]::DecrementOutstandingIO(7332), outstandingIO(0), _interruptReadPending(false) - rearming read
    0.947 [3]          AppleUSBUHCI[0x4f97000]::UIMCreateInterruptTransfer - root hub interrupt transfer - clearing unneeded memDesc (0x5073080) from dmaCommand (0x506a100)
    0.984 [3]          AppleUSBUHCI[0x4f97000]::UIMAbortEndpoint - endpoint 1:1,1
    0.984 [3]          AppleUSBUHCI[0x4f97000]::RHAbortEndpoint - Interrupt pipe - noting status change
    0.984 [3]          AppleUSBHub[0x5076c00]::InterruptReadHandler error kIOReturnAborted (expected)
    0.987 [2]          AppleUSBUHCI[0x4f97000]::HandleInterrupt - Host controller resume detected - calling EnsureUsability
    0.987 [2]          AppleUSBUHCI[0x4f97000]::HandleInterrupt - deferring further processing until we are running again
    1.009 [3]          AppleUSBHub[0x5076c00]::DecrementOutstandingIO(7336), outstandingIO(0), _interruptReadPending(false) - rearming read
    1.009 [3]          AppleUSBUHCI[0x4f97000]::UIMCreateInterruptTransfer - root hub interrupt transfer - clearing unneeded memDesc (0x5073080) from dmaCommand (0x506a100)
    1.045 [3]          AppleUSBUHCI[0x4f97000]::UIMAbortEndpoint - endpoint 1:1,1
    1.045 [3]          AppleUSBUHCI[0x4f97000]::RHAbortEndpoint - Interrupt pipe - noting status change
    1.045 [3]          AppleUSBHub[0x5076c00]::InterruptReadHandler error kIOReturnAborted (expected)
    1.049 [2]          AppleUSBUHCI[0x4f97000]::HandleInterrupt - Host controller resume detected - calling EnsureUsability
    1.049 [2]          AppleUSBUHCI[0x4f97000]::HandleInterrupt - deferring further processing until we are running again
    1.071 [3]          AppleUSBHub[0x5076c00]::DecrementOutstandingIO(7340), outstandingIO(0), _interruptReadPending(false) - rearming read

Oh, sorry, I meant "I'm writing this...".

Problem with external FireWire drive

Two weeks ago I purchased a 1 tb Iomega ultra drive with FireWire 800/Firewire 400/USB 2/ESATA to use for back ups. I plugged it in the Firewire 800 port of my iMac. It worked fine until early this morning. I noticed there was a problem first because it was taking forever to log off or restart the computer with the drive connected and second that Time Machine had stopped doing backups a few hours previously and the drive was no longer recognized by OSX. I can plug it into a USB 2 port and it works fine. I have two Lacie drives daisy chained from the same Firewire 800 port - so the port is just fine. Thus it appears that the problem is with the Firewire 800 connection on the Iomega drive. Time Machine works with USB but I bought the drive for its flexibility. In future I might want use it as a bootable drive plus Firewire 800 is faster than USB 2. Any idea if this could be a software problem? I hate to return this drive since a) I would need to securely erase it first; b) I would have no time machine backup until I received a replacement (though I am doing less frequent conventional backups on 3 other drives (ie subsets of my files since none of the other drives are large enough for a single time machine backup plus I like redundancy); c) it is a pain to pack up and return.
So my question is: should I bother or just live with USB 2 and hope that the FireWire problem does not mean the drive is a piece of junk and should not be trusted for anything?

I called the store where I bought the drive and was told I have up to 30 days to return it. So I tried plugging it into the firewire 800 daisy chain (at the end) and now it's working again. So I will watch it closely over the next few days to see if this happens again within the 30 day return period. Also by registering online at the Iomega website, I now have 3 year warranty.
Also from reading other threads about firewire issues, it appears that intermittent firewire problems may be more prevalent than I would expect (based on previous experience with a variety of firewire drives from many vendors).

Boot problems with Belkin USB hub

I can boot to my internal drive with the Belkin 7-port hub connected. But I can't boot to the System Start-Up Disk or to my external with the hub connected. And once I try, I can no longer boot to the internal until I disconnect the Belkin hub.
I have heard their may be hub problems with the MBP and also with the Belkin hub. Any insight would be appreciated.

These are interesting problems. I have a Belkin hub and have been having long boot times (sometimes 5 or 6 minutes) with a blank blue screen for most of the time. I get partial relief by disonnecting the hub. I also have an SD card reader attached to the hub (Memorex brand), so I'm going to try disconnecting that to see if it helps. One noteworthy thing is that these problems are new, whereas the Belkin hub and the Memorex SD card reader have been attached to my MBP for a long time.

I just order 8 calendars from iPhoto and they came to me fine. Now I need to order two more but when I go thru the process I get a message saying:unable to assemble calendar. There is a probleme with the photo with the file name"(Null)" more........ .

Would someone be able to explain to me the following issue with Iphoto?
I ordered 8 same calendars for my soccer team and received them fine. Although a couple of pictures on it are a little off (out of focus). I need to order two more of the same calendars but when I go thru the process ireceive an error message saying:
"Unable to to assemble calendar" There is a problem with the photo with the file name "(Null)" The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your calendar.
How can I fine this "corrupt" photo? How did it go thru with the first batch of calendars but won't go thru now?
Thank you for your help.

Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

I can not upgrade to quicktime 7.7.3 for windows vista. Error message says there is a problem with the program installer. Any clue as to how to get around this.

I can not download quicktime 7.7.3 for windows vista. The error message says that there is a problem with the windows installer. Any clues?

The error message says that there is a problem with the windows installer.
What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.)

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

Is anyone having a problem with the new iPad (Gen. 3) not staying connected to the charger? It seems to ALWAYS get jiggled loose and no longer be charging. My iPad 1 has no issue but I can't browse Internet w/o new iPad unplugging. Horrible!

I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged.
I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!

Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again!

Having Problems With The Neo2 ? Read This!!!!

Hi,
i just bought a neo2 motherboard, with a p4 2,6 HT and 512 mb Kingston hyper ram ( 2 peaces of 256, else it won't use the dual bandwith :D)
In the beginning everything seemed fine, until i got some sudden reboots and other vague stuff. I read it could be the SB audigy messing things up. I removed the card and windows Xp pro runs fine now. no more sudden reboots or explorer not resonding crashes.
But, i still had problems with games crashing. I got reboots. After i set the "automatic reboot after crash" to false, i got blue screens or lock-ups in my games.
I wondered what it could be. Then i started to put my videocard ( a radeon 9700 pro 128 mb) in agp 4x mode instead of agp 8x! Now my games run without crashes, but benchmarks are not that high. 4780 marks with 3dmark 2003.
I think i will send msi and Ati a mail concerning this problem. I don't know if it is PSU related. Maybe the videocard demands a little more power in agp 8x mode.
Well, having probs with you're NEO2 ??
remove the sb Audigy and turn the agp back to 4 using smartgart ( it's located in you're display settings screen ).
First i tought it was a PSU related problem, because i swapped my 350 Watt enermax with a Q-tec 400 watt psu. The 400 watt PSU died while i was gaming. Maybe the enermax is the better PSU :D So, it could still be a PSU related problem. Maybe the agp 8x settings demands a lot more from you're psu. Anyway, i'll receive a 550 watt Antec PSU soon, so i can check this out....
Btw. I cant run the motherboard in anything better than "slow" mode. In all other modes Xp won't boot. I haven't tryed it since the AGP is at 4X, but i don't think it will matter.
Regards,
Welcome to the real world NEO :D

Ok.....
i raised the memory voltage setting in the bios from 2.65 to 2.8 and the agp voltage from 1.5 to 1.7
Everything seems fine, but games crash back to the desktop now without an error message or the either lockup.
Whatever i do, i can't make the mobo crash in anything but games!
Btw. the following message caught my attention, when i ran f1 2002 with directx 8.1. Since i have directx 9, i haven't seen it anymore. Maybe because the ati-drivers are made for directx 9....
// Watchdog Event Log File
LogType: Watchdog
Created: 2003-10-04 02:02:53
TimeZone: -60 - West-Europa (standaardtijd)
WindowsVersion: XP
EventType: 0xEA - Thread Stuck in Device Driver
// The driver for the display device got stuck in an infinite loop. This
// usually indicates a problem with the device itself or with the device
// driver programming the hardware incorrectly. Please check with your
// display device vendor for any driver updates.
ShutdownCount: 9
Shutdown: 0
EaRecovery: 1
EventCount: 2
BreakCount: 2
BugcheckTriggered: 1
DebuggerNotPresent: 1
DriverName: ati2dvag
EventFlag: 1
DeviceClass: Display
DeviceDescription: RADEON 9700 PRO
HardwareID: PCI\VEN_1002&DEV_4E44&SUBSYS_00021002&REV_00
Manufacturer: ATI Technologies Inc.
DriverFixedFileInfo: FEEF04BD 00010000 0006000E 000A18EA 0006000E 000A18EA 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
DriverCompanyName: ATI Technologies Inc.
DriverFileDescription: ATI Radeon WindowsNT Display Driver
DriverFileVersion: 6.14.10.6378
DriverInternalName: ati2dvag.dll
DriverLegalCopyright: Copyright (C) 1998-2002 ATI Technologies Inc.
DriverOriginalFilename: ati2dvag.dll
DriverProductName: ATI Radeon Family
DriverProductVersion: 5.2.3790.2
I wish i had another videocard to test. My radeon 9700 pro is getting suspicious...
Regards,
The real world

Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.

Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.

This is a major problem with Lollipop, but yo said it started 2 months ago. Several people have fixed problem by removing FaceBook And Face book messenger and then re loading the apps again. You might want to clear your cache before reloading. Not sure this is your problem, but worth a try. Good Luck

Problems with the Firewire Hub at a Cinema Display

Similar Messages

Maybe you are looking for