Problems with the header

Hello,
I have followed the tutorial using my own Photos but now I have a problem. I have taken a screenshot to shot how the header "involves" with the next line.
I don't know how to solve this problem?
Isabella

Moved to the main Dreamweaver support forum.
It's not possible to determine the problem just by looking at a screenshot. The best way to get help is to upload the page to a website, and to post the URL in the forum. You also need to give more information about what you're trying to achieve. Do you want the navigation menu in a column alongside the heading, or should it be a single navigation bar running below the heading?

Similar Messages

I have a problem with the pen in my mag/cyan print head. I have tried cleaning it, and replacing it

I have an HP ML7850 all-in-one model. The display reads "There is a problem with the mag/cyan print head." The HP solution center said I needed to replace the print head. I did, but the problem still exists. I went through the online self-diagnostic testing, and the results are that there is a problem with the pen. I tried to gently clean the pens, but it did not help. Any suggestions?

On D5460, it now prints with a cyan tint over whole picture.

Many problems with the 'Export to Text' (.txt) in CR Xi

Hi,
I have listed many problems with the 'Export to Text' (.txt) function of CR Xi.
These problems are related to this export format only (meaning everything works fine in the Viewer or in the 'Export to PDF')...
- Multi-columns layout do not export as Multi-column (export only a one column);
- Numeric values with parenthesis for negative values or with a fix currency sign at the leftmost position are not exported correctly;
- Fields having a Suppress formula which is "WhilePrintingRecords" do not appears when exported;
- Fields with 'Suppress double value' checked are not always suppressed when exported to Text.
- 'Keep Group Together' flag is not working.
- 'Reset Page Number After' simply does not works when exported to text;
- 'Keep object together' on TextBox/Section is not working.
- Whenever a group is ending on the last line of a page, the the following page as the same Group header as the previous group with no records until the page is filled, then the PageBreak and PageHeader is missing but the records of the following group appears.
I would like to know what is the status of the 'Export to Text' function (is it a deprecated function not supported anymore???).
If still supported, when will these bugs be fixed???
Thanks

Hi Rene
Export to Text is supported till date. Crystal Reports 2008 also supports this with Keep together working however when I tried with format with multiple columns, it didnot show up in the exported text file.
Regards
Sourashree

Problems with the Proxy Programme--Please help

Hi All,
I have written a simple proxy server in the form of a servlet. I changed the proxy config of my browser to connect to this servlet hosted on the default context(http://localhost:8080) of the Tomcat 5.0.25 . Well , this servlet internally connects to the proxy of the corporate LAN . The logic that I have applied is as follows. The servlet gets the request from the client (ie the browser in this case) , extracts the headers and contents from the request, sets them to a new request that it forms and finally send this new request to the proxy. When the proxy responds, the servlet collects the response headers and contents adn writes them in its response. To sum up , this servlet transparently carries the requests and responses between the client(browser) and the corporate LAN proxy. Now the problem is this. Let's say , now I am accessing http://www.google.com.The browser sends a request to my servlet with the following headers as they are extracted by my servlet.
ProxyServer:::>posting request
ProxyServer:::>headerValue::> headerName = accept : headerValue=*/*
ProxyServer:::>headerValue::> headerName = referer : headerValue=http://www.google.com/
ProxyServer:::>headerValue::> headerName = accept-language : headerValue=en-us
ProxyServer:::>headerValue::> headerName = proxy-connection : headerValue=Keep-Alive
ProxyServer:::>headerValue::> headerName = user-agent : headerValue=Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0; UB1.4_IE6.0_SP1; .NET CLR 1.0.3705; .NET CLR 1.1.4322)
ProxyServer:::>headerValue::> headerName = host : headerValue=www.google.com
ProxyServer:::>headerValue::> headerName = cookie : headerValue=PREF=ID=1be27c0a74f198ca:TM=1082058853:LM=1082058853:S=bu6ORrygzm8AUkm8
ProxyServer:::>postRequest
I set these headers into a new connection opened to the proxy and post a fresh request to the proxy,which, in turn responds with the following headers.
ProxyServer:::>posted request successfully
ProxyServer:::>writing response
ProxyServer:::>writeResponse-->headerName = Proxy-Connection : headerValue = [close]
ProxyServer:::>writeResponse-->headerName = Content-Length : headerValue = [257]
ProxyServer:::>writeResponse-->headerName = Date : headerValue = [Tue, 13 Jul 2004 14:01:40 GMT]
ProxyServer:::>writeResponse-->headerName = Content-Type : headerValue = [text/html]
ProxyServer:::>writeResponse-->headerName = Server : headerValue = [NetCache appliance (NetApp/5.5R2)]
ProxyServer:::>writeResponse-->headerName = Proxy-Authenticate : headerValue = [Basic realm="Charlotte - napxyclt2"]
ProxyServer:::>writeResponse-->headerName = null : headerValue = [HTTP/1.1 407 Proxy Authentication Required]
ProxyServer:::>writeResponse exiting
ProxyServer:::>wrote response successfully
I write these headers back to the client. According to what I was thinking, the client ie the browser would open a new dialog box asking for username/password owing to the presence of the "Proxy-Authenticate " header. But it does not happen that way. Rather the browser stops responsding and displays a blank page. Does anyone know why it happens this way? I am pasting the server prog below for everybody's reference.
package server.proxy;
//import all servlet related classes
import javax.servlet.*;
import javax.servlet.http.*;
import java.util.*;
import java.io.*;
import java.net.*;
import server.resources.*;
//My Proxy server --->Currently it is very simplea and relies on
//other proxy servers of an already connected network.
public class ProxyServer extends HttpServlet
//stores the resource bundle
private ServerResBundle resBundle = null;
//checks for the mode of operation
private boolean proxySet = false;
private String proxy = null;
//storing the original System out/err etc
private PrintStream sysOutOrig = null;
private PrintStream sysErrOrig = null;
private InputStream sysInOrig = null;
//initialise certain features that are required later
public void init() throws ServletException
try
//initialise the resource bundle
this.initResBundle();
System.out.println("ProxyServer:::>res bundle init");
//set the mode of operation
this.setMode();
System.out.println("ProxyServer:::>mode set");
//set the system out and err --System.setOut etc
this.setSystemOutErr();
System.out.println("ProxyServer:::>in/out/err set");
}//End try
catch(Exception e)
System.out.println("Exception in init..."+(e.getMessage()));
throw new ServletException(e);
}//Edn
catch(Throwable e)
System.out.println("Irrecoverable Error...");
throw new ServletException(e);
}//End
}//End init
//method to init the resource bundle;
private void initResBundle()
this.resBundle = ServerResBundle.getBundle();
}//End
//method to set the mode of the server--proxy or direct
private void setMode()
//read the target proxy property from the bundle and
//if it is set,take that URL
String temp = (String)(this.resBundle.getResource(ResKeys.PROXY_SERVER));
if ( (temp != null) && (temp.length() > 0) )
this.proxySet = true;
this.proxy = temp;
temp = null;
}//End
}//End
//method to set the system out and err etc
private void setSystemOutErr() throws Exception
//keep a copy of the original system out and error
this.sysOutOrig = System.out;
this.sysErrOrig = System.err;
try
//read the options adn if they are set, take the values directly
String newOutStr = (String)(this.resBundle.getResource(ResKeys.SYSTEM_OUT));
String newErrStr = (String)(this.resBundle.getResource(ResKeys.SYSTEM_ERR));
if ((newOutStr != null) && (newOutStr.length() > 0))
System.setOut(new PrintStream(new FileOutputStream(new File(newOutStr),true),true));
}//End if
if ((newErrStr != null) && (newErrStr.length() > 0))
System.setErr(new PrintStream(new FileOutputStream(new File(newErrStr),true),true));
}//End if
}//End
catch(Exception e)
//restore the stuff
System.setOut(this.sysOutOrig);
System.setErr(this.sysErrOrig);
}//End
}//End
//this is where the proxy functionalities will be embedded
public void service(HttpServletRequest req,HttpServletResponse resp)
throws ServletException,java.io.IOException
//conenction URL
URL target = null;
//conenction to the remote object
URLConnection targetConn = null;
//stores the OOS and the OIS
ObjectOutputStream oos = null;
ObjectInputStream ois = null;
try
//check for the mode of operation
if (proxySet)
URLConnection objects go through two phases: first they are created, then they are connected.
After being created, and before being connected, various options can be specified
(e.g., doInput and UseCaches). After connecting, it is an error to try to set them.
Operations that depend on being connected, like getContentLength, will implicitly perform the connection,
if necessary.
//for the URL to the proxy
target=new URL(this.proxy);
//conenct to the proxy
targetConn = target.openConnection();
//set the details of the connectuon
targetConn.setDoInput(true);
targetConn.setDoOutput(true);
targetConn.setUseCaches(false);
// If true, this URL is being examined in a context in which it makes sense to allow user interactions such as popping up an authentication dialog. If false, then no user interaction is allowed
targetConn.setAllowUserInteraction(true);
//connect to the remote object
// targetConn.connect();//call this only when all the request properties are set
System.out.println("ProxyServer:::>posting request");
//post the received request to the URL
this.postRequest(targetConn,req);
System.out.println("ProxyServer:::>posted request successfully");
System.out.println("ProxyServer:::>writing response");
//receive the response
//write the received response to the client
this.writeResponse(targetConn,resp);
System.out.println("ProxyServer:::>wrote response successfully");
}//End if
else
//currently this functionality is not supported
throw new ServletException(
(String)(this.resBundle.getResource(ResKeys.ERR_FUNC_NOTSUPPORTED)));
}//End
}//End try
catch(Exception e)
if(e instanceof ServletException)
throw (ServletException)e;
}//End
if (e instanceof IOException)
throw (IOException)e;
}//End
//wrap it up in ServletException
throw new ServletException(e);
}//End
}//End
//method to write the response back to the client
private void writeResponse(URLConnection targetConn,HttpServletResponse resp)
throws ServletException
//get all the header fields from the response connection and set them to the
//response of the servlet
Map headerFields = null;
Iterator headerFieldEntries = null;
Map.Entry header = null;
//stores the input stream to the conn
BufferedReader brConn = null;
//stores the writer to the response
PrintWriter prResp = null;
//checks if the proxy authentication needed or not
boolean proxyAuthReqd = false;
try
//juste ensuring that the proxy authentication is reset
proxyAuthReqd = false;
if( (targetConn != null) && (resp != null) )
//Returns an unmodifiable Map of the header fields.
//The Map keys are Strings that represent the response-header field names.
//Each Map value is an unmodifiable List of Strings that represents the corresponding
//field values
headerFields = targetConn.getHeaderFields();
//Returns a set view of the mappings contained in this map
Set temp = headerFields.entrySet();
//Returns an iterator over the elements in this set
headerFieldEntries = temp.iterator();
if (headerFieldEntries != null)
while (headerFieldEntries.hasNext())
Object tempHeader = headerFieldEntries.next();
if (tempHeader instanceof Map.Entry)
header = (Map.Entry)tempHeader;
Object headerName = header.getKey();
Object headerValue=header.getValue();
System.out.println("ProxyServer:::>writeResponse-->headerName = "+headerName+" : headerValue = "+headerValue);
//do not select the key-value pair if both the key adn the value are null
if ( ( headerName == null) && (headerValue == null) )
continue;
}//Enmd
if (headerValue != null)
List headerValList = null;
if (headerValue instanceof List)
headerValList = (List)headerValue;
}//End
if(headerValList != null)
for (int i=0;i<headerValList.size();i++)
Object headerValueStr = headerValList.get(i);
if (headerValueStr instanceof String)
//note that the header-key can not be null for addHeader
//I have made this temporary provision to make the programme work.
resp.addHeader(( (headerName==null)? ("null_header"+i) :(String)headerName),
(String)headerValueStr);
//check if the proxy authentication required or not
if (((String)headerValueStr).
indexOf(resp.SC_PROXY_AUTHENTICATION_REQUIRED+"") != -1)
System.out.println("ProxyServer:::>writeResponse-->proxy auth needed");
//proxy authentication is needed
proxyAuthReqd = true;
}//End
}//Ednd of
else if (headerValueStr == null)
resp.addHeader(( (headerName==null)? null :(String)headerName),
null);
}//End
}//End for
}//End if
}//End if
}//End
}//End while
}//End if
//get the writer to the client
prResp = resp.getWriter();
System.out.println("ProxyServer:::>writeResponse-->proxyAuthReqd="+proxyAuthReqd);
//juste test a simple header
System.out.println("Proxy-Authenticate = "+(resp.containsHeader("Proxy-Authenticate")));
//if the proxy asks you for authentication,pass on the same to the client
//from whom you have received the request.When this flag is true,the connection
//is closed by the remotehost adn hence any attempt to open in input steram
//results in an error ie IOException
if (!proxyAuthReqd)
//now get the content adn write it to the response too
brConn = new BufferedReader(new InputStreamReader(
targetConn.getInputStream()));
String tempStr = null;
while ((tempStr = brConn.readLine())!=null)
prResp.println(tempStr);
}//End while
//close the connections
brConn.close();
}//End if
else
prResp.println("Proxy Authentication needed...");
}//End
//close the streams
prResp.flush();
prResp.close();
}//End if
System.out.println("ProxyServer:::>writeResponse exiting\n");
}//End try
catch(Exception e)
throw new ServletException(e);
}//End
}//End
//method to post request to the internet
private void postRequest(URLConnection targetConn,HttpServletRequest req)
throws ServletException
//extract the header parameters and the body content from the incoming request
//and set them to the new connection
Enumeration reqHeaders = null;
//reads the incoming request's content
BufferedReader brReqRd = null;
PrintWriter prResWt = null;
//stores temp header names and values
String headerName = null;
String headerValue = null;
try
if( (targetConn != null) && (req != null) )
reqHeaders = req.getHeaderNames();
//extract a header adn set it to the new connection
while (reqHeaders.hasMoreElements())
headerName = (String)(reqHeaders.nextElement());
headerValue = req.getHeader(headerName);
targetConn.setRequestProperty(headerName,headerValue);
System.out.println("ProxyServer:::>headerValue::> headerName = "+headerName+" : headerValue="+headerValue);
}//End
System.out.println("ProxyServer:::>postRequest\n");
//establis the actual connection
//calling this method bfore the above loop results in IllegalStateException
targetConn.connect();
//NOTE : try reading from and writing into OIS and OOS respectively
//now read the contents and write them to the connection
// brReqRd = req.getReader(); //this hangs for some reason
brReqRd = new BufferedReader(new InputStreamReader(req.getInputStream()));
System.out.println("Got the reader..brReqRd = "+brReqRd);
if (brReqRd != null)
String temp = null;
//establish the printwriter
// prResWt = new PrintWriter(targetConn.getOutputStream(),true);
prResWt = new PrintWriter(targetConn.getOutputStream());
System.out.println("trying to read in a loop from brReqRd.. ready="+(brReqRd.ready()));
while( (brReqRd.ready()) && ((temp=brReqRd.readLine()) != null) )
System.out.println("In while::>temp = "+temp);
prResWt.println(temp);
}//Emd while
//close the streams adn go back
brReqRd.close();
prResWt.flush();
prResWt.close();
}//End
}//End outer if
System.out.println("ProxyServer:::>postRequest exiting\n");
}//End try
catch(Exception e)
throw new ServletException(e);
}//End
}//End
}//End

Hi serlank ,
Thanks for your reply. Well , I initially I thought of not pasting the code,as it was too long. But I could not help it,as I thought I must show in code what I exactly meant. That's why I followed a description of my problem with the code. You could probably have copied the code and pasted it in one of your favourite editors to take a look at it. Did you,by any chance, try to read it on the browser? And as regards reposting the same message, I can say that I did it as I felt the subject was not quite appropriate in the first posting and I was not sure as to how I could delete/alter the posting. I am not asking for a code-fix,but some suggestions from some one who might ever have come across such a thing.Anyway, lemme know if you have any idea on it. Thanks...

Problem with the hierarchial fields in a Purchase order xml report

Hi,
I am having a problem with the hierarchy problem. We are populating attribute 15 of a PO header. some times it can be null. FYI, we are using 11.5.10 instance where oracle supports direct PO template rather than having a rdf file.
And now in the xml report, if attribute15 of po header is not null then it is fine.
But if attribute15 is null, then the template is picking from the next available attribute15 that is from the po lines. As the line level group of "LINES" is between the "PO_DATA" (header group), hence the template is checking for next available attribute15.
Can any one please suggest how to design the template where we can make the template to check only for that tag at the header level group rather than the line level group tag?
Thank You in advance.
Regards,
Srinivas.

Hi
Incase you want to transfer attachements from SRM to R/3, then you try implementing the BADI in SRM side. The BADI which will help in this case is
BBP_CREATE_PO_BACK BADI.
Please read the standard SAP documentation of this BADI using SE18 Transaction, before making any code changes.
Few Important SAP OSS notes to refer in this case ->
Note 989184 - Transferred shopping cart with internal attachments
Note 550071 - FAQ: EBP - Shopping Cart
Note 916347 - Transfer shopping cart with internal attachments
Note 1001130 - FAQ - Attachment questions (Buyside)
Few useful links ->
http://help.sap.com/saphelp_srm50/helpdata/en/49/b32640632cea01e10000000a155106/frameset.htm
Re: Attachments to backend
Re: Document Attachments in Shopping Cart
Re: Attachment in SRM
Re: SRM Documents and Attachments
Re: Limit in Attachments of an item in Shopping Cart
Re: return delivery text from material document is not passed to SUS

Do let me know, incase you face any problems.
Regards
- Atul

Problems with the Fios 20/5 connection speed in my area dropping down to less than 3mbs.

I have written out a flyer that I plan to go door to door with. Since I am under contract with Verizon, I am forced to honor my side of the contract. Even if they are allowed to make me pay for a service that I am not completely getting. I am very displeased and as soon as my contract is up, I will change back to My local cable companies all in one that does not require a contract and has no issue such as the one I am having.
Do you have Verizon Fios Internet?
Are you on the 20/5 connection?
If so, you may not be getting the speed you are paying for. I am on a 20/5 connection and when my computer is on for longer than an hour the internet download speed with Verizon Fios starts to slow down until it is below 3mbs. It takes about 24 hours to get down to 3mbs but only about an hour or two to get down to about 6-7mbs when I am paying for 20mbs…
I have 3 computers in my home that have Windows Vista, Windows XP home edition and Windows Media Edition 2005. All of the computers run into this same exact issue, I have tried every setting I could think of with my 24 years of computer technical experience. I finally took one machine with Windows XP and ran a full format on the hard drive and reinstalled a fresh Windows Xp Operating system onto the hard drive so it is a bare bones OS. This way there is no other software on the machine that could possibly be causing the problem and found that when I connected online through Verizon Fios the machine still ran into the same exact issue. This proves to me that the issue is not on any of my machines.
Now all of this time my buddy that lives 1.2 miles away from my house has been having the same issue with three computers at his home also. He has Windows Vista on two machines and Windows XP Pro on one.
When I concluded that it was a Verizon Fios issue, after a few months of trying to get by, researching, diagnosing and losing much information in order to verify it was on Verizon’s side, I contacted technical support at Verizon’s online website. The agent and I went through the regular procedure that anyone would have to go through and I patiently explained what I had done to try to diagnose the issue. The agent came to the conclusion that he could not figure out the problem so he guessed that the Verizon router/modem may be the issue and told me he would send me a new one by mail.
I received the new Verizon router/modem, installed it and had to call to have it activated. Afterward it still had the same exact issue as the prior router/modem. So now we know it’s not my computers, it’s not the router/modem. My Verizon router/modem is connected right at the Optical Network Terminal (ONT), which is the box that connects the fiber-optics to your home, usually just inside or outside your garage wall. Mine is just outside…
From here my buddy, who has been having this problem also the entire time, called the local office of Verizon Fios and an installer was setup to come over to his home and trouble shoot the issue. My buddy called me and told me when the installer was headed to his home and I met him at his home to see what the installer found and in hope that my issue would be fixed at the same time. The installer went through the system at his house and was frustrated about not finding the reason for the issue and ready to leave without fixing anything. I simply asked that he stay long enough to see the issue present itself within an hour-hour and a half.
His laptop itself already showed the speed drop from 20mbs to between 16-17mbs, it was on its way down. He basically told us something that online tech support already stated to me, it is extremely difficult to prove it is on Verizon’s side. In other words it is extremely difficult to prove it, in a way that will convince Verizon to check its own servers, routers and software updates to their own systems. The installer, good guy, couldn’t/wouldn’t stay but we did convince him not to simply drop the issue. He called shop and they sent another installer out to take over the issue.
The new installer, great guy, got up to speed on what was already done at my buddies home. The first installer, checked and replaced the Verizon router/modem, checked the wiring and splitters. Basically went through the entire system up to the Optical Network Terminal (ONT), the box that connects the fiber-optics to your home. He pulled and replaced the Optical Network Terminal (ONT), thinking that perhaps the unit was compromised. While he was doing this job a tech was called and asked to stop by for assistance with the issue. The tech checked the computers inside and tried to do some settings that the main office informed him to try. I explained to the tech that the same issue was happening at my house, that I went through every setting I could think of and find online to help alleviate the issue. After some shop talk about what I had tried, including the full format and reinstall of the operating system on one of my machines, he just as I came to the conclusion that it couldn’t be with the computers and since everything that had to do with the Verizon Fios system from the street to the end-user computer had been checked, verified and/or replaced, the issue had to be coming from Verizon’s main office.
The installer had already checked the main at the road that has the 3x2 green service cover on it by the side walk. Everything was in good working order. The tech called the main office to see if my buddy and I were on the same hub, basically a big splitter that continues the service from the main office to the homes, we were not. So that was ruled out…
My understanding of the system ends there. The only other components I know of are the Main branch’s routers, servers and software.
Verizon had a new connection speed added to their system, 25/15 about the same time our issue began. So I am guessing that when they updated the system to include this new connection speed they corrupted the software for the 20/5 connection.
We have been waiting to hear from the tech that was at my buddy’s house, to see if the issue will be dealt with. My buddy has called him a couple of times and he has mentioned that he is trying to get it addressed and to call back if we hadn’t heard from him. He remembered who he and I were and what the issue was, so I believe he is taking it seriously. How far he can move the issue is beyond me…
I want to add that my buddy and I have been customers with the all in one package from Verizon Fios since their services have moved into our area, about a year and a half… It has only been since about June that this issue has presented itself, before then we were on 7th heaven with the speeds. We couldn’t have been more than happy with the services.
This issue has caused that to all go afoul, not only do the speeds get down to less than 3mbs but the speed is not smooth at all. Rather the 3mbs speed is stop and go, freezing in between at times, very choppy. Barely usable at times, unless you restart the computers and start over.
We are hoping that anyone with Verizon Fios Internet Services will keep an eye on their speeds by going to http://speedtest.net and doing tests to verify they are getting the speeds they are paying Verizon for.
This is what it will take for Verizon to take this issue seriously is to gather everyone on the system that may be having the same issue. I believe it is everyone that is within the 1.2 miles from my house to my buddy’s and will distribute flyers to each and every house in between.
If you find that your speed is not as fast as it should be please contact me and I will add you to the list, this way we can see exactly how far this problem covers and perhaps it will also help to show a pattern and understanding as to why the issue is present in the first place.
My contact information,
I have left this out here, you can contact me on these forums...

Actually what this came down to was an issue between Windows Vista and an Ethernet Card on one of the machines in each of our local networks.
Even though our two machines are 6 years apart, we both have the same ethernet adapter on our main desktops. A RealTek RTL8139/810x Family Fast Ethernet Nic. It seems that the adapter does not work at the 20mbs download speeds with Vista. For some reason the adapter does not shut down when the computer does? I don't understand why but it doesn't, it keeps the connection alive. I removed the ethernet cable and pulled the power cable and had my two other computers still connected to the network and found that the issue was resolved. The way I found out was that I used the connections on my main computer to hook up one I had laying around and through further testing found the problem no longer existed...
Then I realized that my buddy and I installed Windows Vista at about the same time, a couple of months ago. Funny how you can forget an important detail like that. Then I remembered that he had the same identical ethernet adapter as I did, I had noticed that while trouble shooting his computer at his home but didn't think it was important at the time. Until the issue was narrowed down to the adapter, then it all seemed to all fall into line.
Quite humbling... In the end, anyone who has Windows Vista and this NIC probably will have problems with the 20mbs download speed of the computers on their own networks. I tried the latest Vista driver from RealTek and also tried to roll back the driver, with no success....
Back at the beginning when we first had fios installed in our homes there wasn't an issue when we had the 10/2 speeds and had Vista. Then we decided to change from Vista to XP because we both were having issues as to what programs you could use and which you could not, shortly after having fios installed. Then when verizon upgraded us to 20/5 we were amazed at the speed and still had no issue because we had XP on our main computers with the RealTek adapters...
We reinstalled Vista because it seemed like we were having more issues with XP by getting hit with Antivirus2008 and its variants and thought it time for a change back...
It didn't really hit us that Vista could be the culprit because we both have a laptop in our networks that have had Vista on them from the get go when there were no issues... We also didn't notice just how bad it was right away and over time kind of left the Vista install out of the equation.
Just strange that one computer can effect all the other computers on the network, even when it is shut down...
I allowed the other two computers to run 24hours and the issue did not present itself, when I added the main computer with the RealTek adapter back to the mix it reappeared. The Realtek adapter is the only real common denominator between his machine and mine.
So now we have three choices,
We can go back to Windows XP.
We can buy a new NIC or a wireless card to replace the RealTek...
Hopefully this post will help anyone else who runs into this problem, it has been very frustrating to say the least...
Thanks to everyone for their help and I apologize for complaining about verizon when it was not a verizon issue. I came to the conclusion that the only part verizon really played was upgrading us to a 20/5 tier which I am thankful for...
Would be nice if this card was on a list that Verizon support could use to troubleshoot , diagnose or eliminate for future support issues.
Message Edited by keiser0619 on 08-06-2009 03:58 PM

Is anyone else having problems with the Canon Online Store?

In the last month or so, I've had one problem after another with the Canon Online Store; from being unable to delete items from the shopping cart; to not being able to add "in stock" items; disappearing Wish Lists; and just now, I tried to add one lens cap to the 6 or 7 items I already had in the Shopping Cart, and they disappeared.
I've called, more than once, and I've written, also more than once, to Canon Support about this, but they ignore what I tell them, and tell me there are no problems with the Online Store. They don't even seem to report to anyone that anyone has complained, because each time is "the first time", even though I've called (more than once) and written (more than once) to them about continuing Online Stores problems.
Is anyone else having problems with the Canon Online Store?
Why does Canon not care to track reported problems with the storefront part of their web-site?
I'm not trying to insult Canon, it's just that I've been a Canon customer for less than 3 months, and the're only batting .333, so far. Canon Support was very quick to respond about a concern I had that a 50mm f/1.4 I had just purchased was authentic or not. In trying to register that lens, I looked up on the Canon web site where to find the serial number. Since my new lens did not have any numbers there, I was concerned I had been sold a fake. But, then Canon Support sent me link to a different online document that showed a few different places where it might be, and there it was.
Is Canon like that with other problems, as well? Or is their "batting" average better than my very limited experience?
I just love my Rebel T5i, and my Canon lenses (from "the Kit brothers of the Cropped Frame coral": EF-S 18-55mm f/3.5-5.6 IS STM, and EF-S 70-300mm f/4-5.6 IS USM; to the "Truly Nifty Fifty", the 50mm f/1.4 USM, [the f/1.8 is just a "thrifty fifty"], and finally, the "Super-Macro" MP-E 65mm f/2.8 1x-5x Macro)!
Regards and Thanks,
Calen
As an old friend used to always say,
"Keep Looking Up!"
Calen

Hi Danny. Thanks for replying.
I only use my desktop PC to access Canon's web site, and I've been using Mozilla Firefox for years. And, yes, it is the latest version. Since Canon REFUSES to support the use of Firefox on it's web site, WHAT BROWSER DOES CANON SUPPORT? WHEN did Canon STOP SUPPORTING Firefox?
I've been told that there are 2 pending orders in my account. Yet, I NEVER placed those orders! WHY CAN'T CANON SEE THAT THIS IS A PROBLEM???
Instead of off-target suggestions, and pasted boilerplate REFUSALS TO EVEN LOOK at this issue, I would prefer it if Canon went "old school", and FIXED THE PROBLEM, in the first place! But, maybe that's a bit too grown up of an answer for you!
"Award-winning" support??? And, just exactly WHAT AWARD did Canon "support" WIN for CONSISTANTLY IGNORING REPORTED PROBLEMS??? The OSTRICH?
Please pull your head out, and FIX this problem, OR YOU ARE THE PROBLEM!!!
Thank you for your "prompt" attention to this matter!
Calen
As an old friend used to always say,
"Keep Looking Up!"
Calen

HP Officejet Pro 8600+ "There is a problem with the printer or ink system..."

I have an HP Officejet Pro 8600+ that is coming up with an error message. This just happened out of the blue yesterday. The printer is just over a year old.
It says:
"There is a problem with the printer or ink system. Print head missing not detected incorectly installed or incompatable"
I have removed and reinstalled ink cartridges, the head, unplugged, cleaned, etc. etc.
HP Officejet Pro 8600+
Product Number CM750A
Serial Number {Content Removed}
Not under warranty
Please advise.
This question was solved.
View Solution.

Sorry that you are experiencing this problem. Here is a link that may assist you with the ink system.
http://goo.gl/BXDFf
It seems to be a bad print head, or it needs manually cleaned with lint free cloth and water. If these steps do not resolve the issue, contact HP Support (1800-474-6836).
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

There's a problem with the recipient's mailbox. Please try resending this message.

I have a user who cannot receive a message from a particular external sender. That senders assistant (same domain and server as the external sender with the issue) is able to forward the exact same message to my user and it arrives as it should. In
message tracking, I can see the message came in through my smart host, through my front end and to the users mailbox server, where an NDR was generated. We had the assistant forward us the NDR and it says:
There's a problem with the recipient's mailbox. Please try resending this message. If the problem continues, please contact your helpdesk.
From my 3rd party smart host/spam filter, I have a copy of the message in audit and when I forward it to myself, the same thing happens - it generates an NDR when it arrives at my Exchange mailbox server. This makes me conclude that my end users mailbox
isn't corrupt, rather it's something in the message header that our server doesn't like (I've seen this happen with other senders as well, but it is extremely rare and random).
Details/facts of my environment:
-Current production messaging system is Exchange 2003.
-Working on Exchange 2010 co-existence.
-This problem between this sender and us has been an issue before the introduction of Exchange 2010.
-I'm hoping to begin end user mailbox migrations to 2010 and will have the sender try again at that time, but I still have testing to do with our voice messaging system before I can begin moving end user mailboxes.
....Begin redacted NDR detail....
Remote Server returned '< #5.2.1>'
Original message headers:
Received: from fe.mydomain.com ([192.168.1.10]) by
mailboxsrv.mydomain.com with Microsoft SMTPSVC(6.0.3790.4675); Thu, 4 Sep
2014 12:49:48 -0700
Received: from exc2010.mydomain.com ([192.168.1.50]) by
fe.mydomain.com with Microsoft SMTPSVC(6.0.3790.4675); Thu, 4 Sep
2014 12:49:47 -0700
Received: from smtp.mydomain.com (192.168.1.49) by exch2010.mydomain.com
(192.168.1.50) with Microsoft SMTP Server (TLS) id 14.3.210.2; Thu, 4 Sep 2014
12:49:47 -0700
Received: from pps.filterd (PPMail.mydomain.com [127.0.0.1]) by
PPMail.gsblaw.com (8.14.5/8.14.5) with SMTP id s84Jkb0n023682 for
<[email protected]>; Thu, 4 Sep 2014 12:49:47 -0700
Received: from na01-by2-obe.outbound.protection.outlook.com
(mail-by2on0098.outbound.protection.outlook.com [TheirIP]) by
PPMail.gsblaw.com with ESMTP id 1p6da7h0jw-1 (version=TLSv1/SSLv3
cipher=AES256-SHA bits=256 verify=NOT) for <[email protected]>; Thu, 04 Sep
2014 12:49:42 -0700
Received: from Theirexchange.theirdomain.com (TheirinternalIP) by
Theirexchange.theirdomain.com (TheirinternalIP) with Microsoft SMTP
Server (TLS) id 15.0.1019.16; Thu, 4 Sep 2014 19:49:38 +0000
Received: from Theirexchange.theirdomain.com ([10.141.86.14]) by
Theirexchange.theirdomain.com ([TheirinternalIP]) with mapi id
15.00.1019.015; Thu, 4 Sep 2014 19:49:38 +0000
Content-Type: multipart/mixed;
 boundary="_000_9a166afd24964edda2d5439ba3dbe712DM2PR08MB445namprd08pro_"
From: Mr Sender <[email protected]>
To: My User <[email protected]>, "Another external recipient ([email protected])"
 <[email protected]>
Subject: FW: A Subject
Thread-Topic: A Subject
Thread-Index: Ac/C2zn97ruwXQpoQtGNrjKOr1NckgFmNoeAAAEpQ2A=
Date: Thu, 4 Sep 2014 19:49:37 +0000
Message-ID: <[email protected]domain.com>
References: <[email protected]domain.com>
<[email protected]ET>
In-Reply-To: <>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach: yes
X-MS-TNEF-Correlator: <[email protected]domain.com>
x-ms-exchange-transport-fromentityheader: Hosted
x-originating-ip: [internetIP]
x-microsoft-antispam: BCL:0;PCL:0;RULEID:;UriScan:;
x-forefront-prvs: 0324C2C0E2
x-forefront-antispam-report: SFV:NSPM;SFS:(10009015)(6009001)(189002)(199003)(377454003)(164054003)(64706001)(66066001)(19609705001)(15202345003)(50986999)(19300405004)(19625215002)(90102001)(80022001)(20776003)(83322001)(101416001)(99936001)(76176999)(54356999)(81542001)(21056001)(19580395003)(86362001)(4396001)(92566001)(16236675004)(85852003)(551944002)(74502001)(83072002)(87936001)(74662001)(31966008)(107886001)(81342001)(76482001)(46102001)(85306004)(105586002)(33646002)(15975445006)(99396002)(76576001)(74316001)(77982001)(79102001)(95666004)(108616004)(2656002)(106356001)(99286002)(24736002);DIR:OUT;SFP:1101;SCL:1;SRVR:DM2PR08MB446;H:DM2PR08MB445.namprd08.prod.outlook.com;FPR:;MLV:sfv;PTR:InfoNoRecords;MX:1;A:1;LANG:en;
MIME-Version: 1.0
X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:5.12.52,1.0.27,0.0.0000
definitions=2014-09-04_03:2014-09-04,2014-09-04,1970-01-01 signatures=0
X-Proofpoint-Spam-Reason: safe
Return-Path: [email protected]
X-OriginalArrivalTime: 04 Sep 2014 19:49:47.0046 (UTC) FILETIME=[61900460:01CFC879]

A little more discovery...
From my smart host/SPAM filter audit folder, I could see the message was received with a 2 meg "winmail.dat" file. Yesterday, I had attempted redirecting the message to my own mailbox, and it bounced. I decided to try redirecting the message
to a 2010 mailbox, and the message arrived. It had 3 attachments, 1 Word doc, and 2 PDF files. So, this appears to be an encoding issue with the winmail.dat file. Any work arounds/reasons for winmail.dat from being rejected at the mailbox
server? Once it made it to a 2010 mailbox/client, I was able to forward to a 2003 mailbox no problem.

When downloading from a Sony minidisc video camera, the picture is downloading but without sound. Previously, it had downloaded successfully both sound and picture. I have subsequently upgraded to Lion X (10.7.4). Is there some problem with the driver?

When downloading from a Sony minidisc video camera, the picture is downloading but without sound. Previously, it had downloaded successfully both sound and picture. I have subsequently upgraded to Lion X (10.7.4). Is there some problem with the upgrade which is affecting the transfer? Is there a way of resolving this?

When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

Problems with the Spry Content Slider Widget in DW6

Hello there,
I have been wrestling with a problem I'm having with the Spry Content Slider Widget that I hope someone has an answer for.
I have 2 widgets on a page, but the problem I'm having occurs whether there is 1 or 2 on the page.
No matter how many slides I have in the widget, it only shows the first 3. The 2 widgets per page occurs on every html page (9 in total.)
In there a setting in the inline or linked .js code limiting the number of slides to 3?
In addition to these widgets, I also use a DWUser_EasyRotator Slider on the pages, and both the easyRotator and Spry Widgets launch a fancyBox jQuery Gallery. Tho it's a possibility, I don't think the mixing of sliders/js is the problem, as I was having the problem with the Spry Widget showing only the first 3 upon the first insert of the Widget.
Any suggestions on settings I should be aware of, as regards the Widget, would be greatly appreciated… (;

On line 66 of your code, you have an extra </head> tag that doesn't belong. Remove that and validate your code again.
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.gallerynumber9.com.au%2Findex ---778.html
Nancy O.

Problem with my header

I have a website setup and running for at least a year. We just changed to a dedicated server and for some reason I am experiencing trouble with the header image of the general web. When I load the page the header is now loading behind the flash window and then on a second hit of the enter key will load to the top where it should be. This site has been up and running for almost a year, can't figure why the problem now. But need to know what I need to look at. The flash content has been there since the beginning too.
Any help would be appreciated.
I have a copy at http://www.nepa-alliance.org/index2.htm
Would appreciate any guidance. One more thing if I may. I ran it through the w3c validator and got a terrific amount of errors for the code "<", "&", "> in the various scripts in the head. It recommends replacing it with the "&lt" , & but won't this screw up the script.
Thanks for any help.
rakeeka

Chances are you site has always been this way but you were unaware of the extent to which your APDivs / Layers / code validation errors have tripped you up bigtime.
How APDivs work
http://apptools.com/examples/pagelayout101.php
Code Validation Tools
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
HTML & CSS Tutorials
http://w3schools.com/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com

Problem with the importing wizard

Hei,
I have a dll which I want to import to the Labview project. So, I decided ti use the import wizard, but when parsing the header file, Labview freezes. I am using a couple of structures (3) and a handle. I have also read that the wizard has problems when dealing with complex data. What would be best solution for adding it to the project? To in a way "unbundle" the struct and then create a many simple variables and then parsed to dll. (This would be a pain)
How to deal with the handle or will wizard easy understand that?
I am really looking for a painless solution
thanks for the help

Can you post the header file for the DLL?
Through a process of trial and error you could determine which functions causes problems with the wizard (comment out half the functions, attempt to import, repeat) and then manually create the LabVIEW VIs for the troublesome ones. If there aren't too many functions, you could do it all by hand, which isn't that hard if you have some understanding of C (and if you don't, you'll undoubtedly have other problems when the wizard doesn't do the right thing).

TS2634 I can only get sound through my ipad with the head phones.

I can only get sound through my ipad with the head phones. I haven't had this problem before. I upgraded about a week ago, but this is the first time the sound has been an issue. When I turn up the volume it shows that it is the volume for the headphones but I can't figure out how to adjust the volume for everything. I have rebooted.

Also try this if above doesn't work.
1. Plug and unplug my headphone jack into the iPad four times.
2. On the fourth time leave the headphone jack connected and rotate the plug clockwise, then remove and try your sound.

Error: There is a problem with the file and it cannot be copied

I've been trying to copy (and essentially move) the contents of an NTFS-formatted external HDD to my iMac's internal HDD so I can then format the external HDD to Mac OS Extended. However, when I simply try to drag and drop, I get an error during the transfer that states:
There is a problem with the file and it cannot be copied.
I tried a basic cp command in Terminal to copy all contents of the external HDD to a folder on my iMac's desktop, and found that while there were no errors, there were many individual files missing full chunks of data (ie. original file would be 4GB on my external HDD, but only 350MB on my desktop).
Any ideas on how I can successfully copy a large amount of data (approx. 170GB) from my external HDD to my internal HDD while avoiding this error, so I can ultimately format my external HDD to Mac OS Extended? ANY help is greatly appreciated.

That's not a good error to see. It indicates something is very wrong. Pulled out of an old programming header file:
ioErr = -36, /*I/O error (bummers)*/
If Apple labelled it "bummers," they had a good reason! Unfortunately, that doesn't bode well for you.
Try running Disk Utility again. Keep repairing over and over until one of two things happens: 1) Disk Utility says no repair was needed, or 2) Disk Utility reports the same error in two sequential repair sessions and is unable to repair it both times.
If you hit the second case, or if you hit the first but still can't copy files, then you've got two basic options:
= Buy a third-party disk utility or two and try them. Try TechTool as a first choice.
= Recover what files you can and write the rest off as gone.
= Send your drive to a data recovery service and hope they can extract more than you can.
Of course, none of this is necessary if you have a backup of the contents of that hard drive. (If you don't, this is your learning experience. Once bitten, twice shy, so they say.) Also, regardless of the outcome, once you've got your data or have decided it's gone, you're going to want to wipe that drive completely clean. Reformat the drive with Disk Utility, then when it's done, select the drive in Disk Utility and hit command-i. (Don't select the new volume you just created on that drive, select the drive itself. Mine looks like "232.9 GB Hitachi ..." with the volume name indented underneath.) Look for an item that says S.M.A.R.T. Status, and if it doesn't say Verified, you might as well throw out the drive. Don't trust any more data to it.
If all appears safe, you can start moving data back onto it. But, as always, make sure you have a backup of everything!

Problems with the header

Similar Messages

Maybe you are looking for