Problems with the table of lock is fills

Hello all
In my system in occasions repeated, the table of lock it is fills
Per this problem, I did open the message with SAP and in this message the sap support, I replied that increase the parameter value "enque/table_size" at 200 MB, this is the value for 200 MB (202752)
With the parameters implemented in my system, the table of lock to a is fills, this is not resolved my problem and continuos.
Other comment is that the value maximun is 200 MB for this lock table.
I think the problem is in the programs that executed this lock, when is executed some programs that sent the information at my stores, is when the lock table fills.

Thaks for you answer
Already enters in the transaction SM12 and see the registers in this table
with this information, I found the users that added lock in the system and the system table the which is locked.
But with this information, how can know few registers are locked per users in the SM12 and top file and history alone display this information
300 PRODUCCION1 30.11.2010 U 11/30 Nr_of_Locks:    4960 Scope: 2   0     4,960
300 PRODUCCION    30.11.2010 U 11/30 Nr_of_Locks:     5000 Scope: 2   0     5,000
300 PRODUCCION1   30.11.2010 U 11/30 Nr_of_Locks:     4918 Scope: 2   0     4,918
300 PRODUCCION1   30.11.2010 U 11/30 Nr_of_Locks:     4956 Scope: 2   0     4,956
300 PRODUCCION     30.11.2010 U 11/30 Nr_of_Locks:     5020 Scope: 2   0     5,020
300 PRODUCCION1   01.12.2010 U 12/01 Nr_of_Locks:     4911 Scope: 2 0     4,911
300 PRODUCCION1 01.12.2010 U 12/01 Nr_of_Locks:     5014 Scope: 2 0     5,014
300 PRODUCCION1   01.12.2010 U 12/01 Nr_of_Locks:     4939 Scope: 2 0     4,939
300 PRODUCCION1   01.12.2010 U 12/01 Nr_of_Locks:      190 Scope: 1 0      190
300 PRODUCCION1   01.12.2010   U 12/01 Nr_of_Locks:      191 Scope: 2 0     191
300 PRODUCCION1   01.12.2010   U 12/01 Nr_of_Locks:     4775 Scope: 2 0     4,775
300 PRODUCCION1   01.12.2010   U 12/01 Nr_of_Locks:     5022 Scope: 2 0     5,022
For my is important know which is the number of locks of this user,this I would give me an idea more clear the problem.

Similar Messages

Problem with the table control BDC in FV60 transaction

Hi All,
I got the problem with the table control in FV60 transaction.
This is working for 900 line items.After 900 line items it is giving the problem like it is 1000th line item.You can post only 999 line items.
I know we can post only 999 line items,but in my file only 920 line items.
Please give me solution,if anybody come across this situation.
Thanks & regards,
rakesh.

Hello Rakesh ,
your file may have only 920 line items , but based on those line items, SAP may create few more new lines ( based on the clearing recon accounts , inter company transaction ...etc )...
regards
Prabhu

HT4113 anyone else have a problem with the iphone 4s locking and not able to unlock even though you keep entering the only code that you have used?

Anyone else having a problem with the iphone4s locking and not letting you in even though you keep using the only code you have entered from the begginning?

No. You are the first person out of 900 million users to have this problem.

Problem with the table view's _visibleBounds when used on a scroll view

I've had numerous problems with getting a table view to work on a scroll view since the table view keeps resizing (http://discussions.apple.com/thread.jspa?threadID=2618816&tstart=0)
I have created the views in IB. The scroll view is attached to the controller's view, and is assigned as the controller's view. The frame size of the scroll view is 320x436. I am manually setting the content size in code:
UIScrollView* tempScrollView = (UIScrollView*) self.view;
tempScrollView.contentSize = CGSizeMake(320, 720);
The table view's frame's width/height is set to 280x88 in IB (i.e the size of two cells), and the header and footer are set to size 0.
However, when I run the code, the table view is smaller, it is only 280x68. I have looked in the debugger, and the table view's _contentSize (of its scroll view) is 280x88; however, the _visibleBounds property is 280x68.
I've tried looking into the documentation for the UITableView class, but can't find anything on the _visibleBounds property, or where it is being set and how to force it to the correct size.
If anybody has any advice, I'd appreciate it.

I can get around this problem by going to the scrollview which the tableview belongs to, and unchecking the Autoresize Subviews box.
But if anybody knows about the _visibleBounds property, or the rules which are applied when resizing subviews, I'd be interested.

Problem with the table that goes on next page

Hi all,
In my template there is a table that stores detail information. The table property is set to display in box format meaning only the border and not grid. Also I have used <?if:position() mod 10 =0?><xsl:attribute name="break-before">page</xsl:attribute> to display only 10 rows per page. now if there are say 15 rows for detail then the remaining 5 lines are correctly printed in next page, but the table in first page is not displayed in box format.
If needed I can provide you with the xml and template.
Thanks in advance.
Suresh

quick work around
put this table in another table
give the box format for outer table,none for inner.

Проблема с оглавлением/The problem with the table of contents

Добрый день, я использую Pages 5.5.2 и при создании оглавления у меня возникла проблема: Если поставить фильтр по заголовкам, а не использовать все, как предлагается в начале, то гиперссылки в нумерации обновлении сбиваются.
Например: Заголовок 1       страница 1
                   Заголовок 2       страница 2
                   Заголовок 3       страница 3
                   Заголовок 1       страница 4
                   Заголовок 2       страница 5
                   Заголовок 3       страница 6
                   Заголовок 1       страница 7
                   Заголовок 2       страница 8
                   Заголовок 3       страница 9
это изначальный вариант, требующий форматирования, так все работает, но если отфильтровать ненужные стили заголовков, то результат будет таким:
                   Заголовок 1       страница 1 - при нажатии отправляет на страницу 1
                 Заголовок 1       страница 4 - при нажатии отправляет на страницу 2
                   Заголовок 1       страница 9 - при нажатии отправляет на страницу 3
Скажите пожалуйста, как это исправить?
Please tell me how to fix it?

Courtesy of Google I can translate for you in hopes someone else will assist you, Nikita. There are many experienced Pages users here.
Hello, I use Pages 5.5.2 and when creating a table of contents I have a problem: If you put a filter on the title, and not to use everything as suggested in the beginning, the hyperlinks in the numbering update astray.
For example: Title 1 page 1
                    Heading 2, page 2
                    Heading 3 Page 3
                    Heading 1 Page 4
                    Heading 2, page 5
                    Title 3 Page 6
                    Heading 1 Page 7
                    Heading 2 Page 8
                    Heading 3 Page 9
this is the original version, which requires formatting, so it works, but if you filter out unneeded heading styles, the result will be:
                    Heading 1 Page 1 - when you send a page 1
                    Heading 1 Page 4 - when you send to the page 2
                    Heading 1 Page 9 - when you send a page 3
Please tell me how to fix it?

Problem with the pen tool creating a fill when I only want stroke

Hi,
I'm having an issue. I am creating a simple spider for a project. Initally I used the pen tool to make legs. It worked for a bit then all the sudden started filling in an area I didn't even draw with color. I'm not sure what I did to cause this to happen. Any help would be appreciated. Thanks

That shape shows a Yellow fill, probably from the last shape you drew. If you select the shape and deselect the fill, then your drawing will go back to Black strokes only.

Does anyone have problems with the reminders app locking?

I entered a basic reminder and attempted to add a "Remind Me" date, now my reminders is locked and wont get out of the original reminder. Any suggestions anyone?

Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release].

Problems with a table in PDF`S footer

Dear sirs,
We are having problems when trying to run a PDF with Adobe LiveCycle Designer tool.
We are working with a PDF which is composed of a header, the main body and a footer. We have created a table (table1) at the footer and
another one at the main body (table2). This last table (table2) may overflow therefore it will genarate two pages for our PDF.
On both pages appear the header and the footer correctly but in the last page it does not write the data from the table included in the footer (table1).
We have no problems with the table included in the main body
In the attachments, I send you the screenshots of both pages in which I have marked in red the part where we have error.
May you help us to solve our problem?
Thanks in advance your help.
Edited by: emgaitan on Mar 16, 2010 2:18 PM

Wardell,
Check the data in RSA3 for the extractor that you use to bring data .
You must be using the data source 0CO_OM_CCA_09. Check the data and reconcile and you will get it.
Let me know if you need anything else.
Thanks
Ravi Thothadri
[email protected]

Problem with maintain table views SM30 Transaction

Hello All,
i have a problem with the table maintenance view SM30, it doesn't permit me to modify the rows in the table.
we have added a field into the table and when i tried to change the table view from menu: Utilities ==> table maintenance generator==> change the system propose me a message that the screen 0001 will be deleted and recreated...but the system has deleted the screen and doesn't recreate it...in somewehere on internet we find that we should use the transaction SE55 menu:
Environment==> modification ==> Maintenance screen ==> button Layout which open the tool Screen Painter and from that we have created our screen with 4 fields of our table...our result that the screen is created and i can see it from the SM30 transaction but i can't insert rows in the table...when i try to go to maintain table: menu: Utilities ==> Table maintenance generator to try if i can modify something the system give me a message: "set the compare flag dialog ZIV_DP_PLCHAR_LA"
the ZIV_DP_PLCHAR_LA is the name of my table...
can you give me some advices please how should i do to fix this problem to insert rows in table throughout the transaction
SM30 "maintain table views: initial screen"
if i want to delete the screen from the SE55 transaction to recreate it newly what should i do to take care about some options
to have a new screen?
thanks for all
Bilal

Hi
First delete the old table maintainence generator.
Now Recreate the screen and your table is good to go..
These error messages come when we add new fields and different version of the table maintainence generator in database.

Error with the table maintenance screens

Hi Experts,
I have created a maintenance view for two tables. The first table has only one field, which is the primary key. The second table is the text table for the first table, where the description of the primary key is maintained. Initially after creating the table maintenance for these two tables, all the fields were comming correctly. The first table showed only one field in the SM30 and the second table showed all fields in SM30(primary key, its description and the language key). The table maintenance was later deleted and regenerated, due to some changes in the table. After regenerating the TMG it is seen that the first table shows all the fields in SM30 same as the second table. I feel the function group program is not getting refreshed. Is there any method to regenerate the function group.
Thanks in advance.
Regards,
Anu.

Hi Dhina,
I deleted the TMG for both the primary table and the text table, but when I check in SE16 I still find all the fields in the primary table just like the text table.
My first table has
MANDT
EDUCATION_TYPE
My second table has
MANDT
LANGU
EDUCATION_TYPE
DESCRIPTION
I have create a maintanence view joining the above two tables(with the following fileds MANDT, EDUCATION_TYPE, DESCRIPTION), and deleted the table maintenance of the above tables. But still when I check the first table in SE16 I can see fields MANDT, EDUCATION_TYPE, DESCRIPTION.
What is the problem with the table maintenance?
Any idea?
Thanks
Anu.

I bought my iphone unlocked from carephone warehouse, I had a problem with the phone and apple swapped it over but they locked it to tmobile!!! what can i do?? I have changed contracts and can not use my phone!

I bought my iphone from carephone warehouse, sim free and with no contract. 5 months down the line I had a problem with the phone and I booked a genius appointment, they swapped my phone and gave me a new phone but they locked my phone to tmobile!!! I now do not use tmobile and I have an iphone which is locked to tmobile!!! I bought an unlocked phone and apple have locked it!!! what can i do?

In response to this, Carphone Warehouse (and Phones4U) sell what is commonly referred to as "sim free" handsets - these are not the same as unlocked. Sim free handsets will automatically lock to the first network sim card that the phone is activated with, and that will be permanently. The only way to unlock the handset would be to go through the network (T-Mobile I understand) and request they unlock it for you. More than likely, there will be a charge as you are no longer a T-Mobile customer.
If you ever want to purchase a new unlocked iPhone, the only place you can buy one is from Apple directly. Any other place will most likely sell sim free handsets.

Problem with the XI-Audit log entries in the table "XI_AF_MSG_AUDIT"

Hi,
I have an async-szenarios for PO:
We send Idoc's from SAP ERP to a WebService via SOAP. And we take Ack's. We use Integrationsprocess with deadline block to catche the errors after the retrying (three times) and to send they via e-mail.
Our problem is, the number of the audit logs in the table "XI_AF_MSG_AUDIT":
In the RTW only we see one audit log (with three retries) in an error case. But in the table XI_AF_MSG_AUDIT there are about 76 entries for the same audit log in the error case and about 20 entries in the case of the succuessfull processing.
This number of the entries in the table causes problem with the size of the redo log file and delete job of cours the large size of the table and therefore problem on the data base. The table can not be controlled. The delete job can not run and cancels every time due this redo log problems
What can cause that?
How can it be prevented, that so much entries are not be made in the table "XI_AF_MSG_AUDIT".
Best regards
Gueltekin

Hi Gueltekin,
I am only aware of the general property auditLogEnabled of J2EE Engine Service SAP XI AF Core, which controls in general (default = true) that entries in the AF Message Audit log are written at all.
(see [http://help.sap.com/saphelp_nw70/helpdata/en/5c/22ee41c334c717e10000000a155106/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/en/5c/22ee41c334c717e10000000a155106/frameset.htm])
I assume that your scenarios in the error case is sending up to three messages and for each message the number of audit log infos are created. You might want to check the detailed entries in the log and see from where they are comming, you might use customer modules etc. as well.
Best regards,
Silvia

Hello I have a problem with the iPhone 5 does not know the account activation lock

Hello I have a problem with the iPhone 5 does not know the account activation lock

You will not be able to access the device without the account activate lock password. IF you have the receipt and other proof of purchase you may have sucess with contacting apple and asking them for assistance. Depending gretaly on how much proof of purchase you have.
Good luck Friend.

Help solve the problem, with the lifting of purchasing and payment card is locked, and now I can not pay for her purchases in the app store

help solve the problem, with the lifting of purchasing and payment card is locked, and now I can not pay for her purchases in the app store

Contact the App store for Apple ID help. Their support link is on the right of the App store window
LN

Problems with the table of lock is fills

Similar Messages

Maybe you are looking for