Problems with the Tutorial in the MDK Documentation

Hey,
I have made the tutorial-exercise of the MDK-documentation, in which You try to create a SyncBO and let generate the client application.
When I do all the steps and import the generated XML-file into my Eclipseproject, it should be possible to test the application on the client, after uploading to the middleware.
But when I download it to the client by synchronizing and when I´m clicking on the shown link then, it doesn´t start!
I get the message "The page cannot be found..".
But when I´m installing other application, like f.e. MAM, I can start it....
Any ideas?
Many thanks!

When you generate the web.xml file, one section is commented as follows:

You have to uncomment this section.
Regards,
Todor

Similar Messages

Problems with the jax-rpc testcase from the JWSDP tutorial

Hello.
I have e few problems with the hello case from the JWSDP tutorial.
Everything works fine during the build/compile/installation phase but when I'm accessing the url http://localhost:8080/jaxrpc-hello/jaxrpc, the server wont find the service and I get:
404 The requested resource (/jaxrpc-hello/jaxrpc) is not available.
I've trippel checked the environment settings and other properties and I don't know where to go to error check.
I've tried to install the client as well but it wont detect the service so I guess there is a problem on the server side.
I'm quite new to the whole "Web Service thing" So I would be happy to get som help.
Chris

if you run the tomcat manager application at http://localhost:8080/manager/list, what do you see? I suppose if you have successfully run the ant "install" task after "compile-server" and "xrpcc-server", you will see that your service is registered with its context path, but is not "running". This will be probably because of a runtime error. For further diagnosis of errors like these, I recommend to take a look at the log file at "<%JWSDP_HOME%>/logs/catalina.out".
If you are satisfied with this answer, please be so kind and assign some of your duke dollars to me ;-)

Problem with the FOR statement.....again!

Hi everyone,
Well I'm still trying to do a car slideshow using external
files and can't seem to see the end. The current movie is here:
http://www.virtuallglab.com/projects.html
I also attach the code. My problem is I had originally set up
an animation with 2 pictures sliding in with some text, and then
wait 4 seconds before sliding out, and then next pictures and text
would slide in and so on, using a setInterval.
The problem is the FOR loop seems to skip the setInterval and
the function "wait", so it just loops quickly and jumps to last
picture, so on the example above, it just slides the last picture
(i=9) and that's it!
Can you not include another function within a FOR statement.
Or is there a way to tell the FOR loop to wait until all motion is
finished?
Any help greatly appreciated
import mx.transitions.*;
import mx.transitions.easing.*;
for (i=0; i<10 ; i++) {
var picLeft = "pics/"+i+".jpg";
var picRight = "pics/"+i+"b.jpg";
var txtToLoad = "text/"+i+".txt";
this.createEmptyMovieClip("leftHolder",1);
leftHolder.loadMovie(picLeft,i,leftHolder.getNextHighestDepth());
leftHolder._x = -200;
leftHolder._y = 15;
var leftTween:Tween = new Tween(leftHolder, "_x",
Strong.easeOut, leftHolder._x, 10, 2, true);
this.createEmptyMovieClip("centerHolder",2);
centerHolder.loadMovie(picRight,i+"b",centerHolder.getNextHighestDepth());
centerHolder._x = 180;
centerHolder._y = 250;
var centerTween:Tween = new Tween(centerHolder, "_y",
Strong.easeOut, centerHolder._y, 15, 2, true);
text._x = 600;
myData = new LoadVars();
myData.onLoad = function(){
text.carText.text = this.content;
myData.load(txtToLoad);
var textTween:Tween = new Tween(text, "_x", Strong.easeOut,
text._x, 420, 2, true);
myInterval = setInterval(wait, 4000);
function wait() {
var leftTweenFinished:Tween = new Tween(leftHolder, "_x",
Strong.easeOut, leftHolder._x, -200, 1, true);
var centerTween:Tween = new Tween(centerHolder, "_y",
Strong.easeOut, centerHolder._y, 250, 1, true);
var textTween2:Tween = new Tween(text, "_x", Strong.easeOut,
text._x, 600, 1, true);
clearInterval(myInterval);
***************************************************************************************** ***

There is no way to tell a for loop to wait. That is not what
they do.
The entire for loop will execute (if possible, and it doesn't
enter some kind of continuous infinite loop) completely before each
time the frame is rendered.
If you want to spread things out over time you need to use
the setInterval -- but not inside a for loop! If you do that you
immediately set however many intervals as your loop has. In this
case you will also assign the ids for those intervals to the same
variable, effectively overwriting the value so you will never be
able to clear most of those intervals.
So you need to rethink you whole structure. Set up some kind
of counter and limit like this:
var slidesToShow:Number=10;
var curSlide:Number=0;
Then have your setInterval increment the curSlide each time
it is called and check to see if it has shown all of them. That is
where your "loop" comes in.
As for the other part of your question -- yes you actually
have two different issues going on -- again you cannot make a for
loop wait for anything. So no there is no way to pause it while you
wait for your tween to end. But you can be notified when a tween
ends.
Check out the documentation about the tween class in the help
files. There you will find the onMotionFinished event. So you can
set up one of those to start whatever needs to be started when the
tween has finished.
You should also use the MovieClipLoader class to load your
images, because you have no idea how long it will take to load
them. Using that class you get a nice event (onLoadInit) that tells
you when the asset is ready to be used.
Finally I'm thinking you might want to use setTimeout instead
of setInterval. It only goes once, while setInterval repeats
forever. So I would think your algorithm would be something like
this.
1. load external asset
2. when ready animate in and set onMotionFinished handler
3. when motion is finished start loading next asset and
setTimeout for 4 seconds.
4. when 4 seconds is up or the clip is loaded (which ever
takes longer) go to 2 and repeat.
If this is going to be run locally on a hard drive or CD you
won't have any problem with the length of time it takes to load the
external assets, but if it is over the web it will take time.

Problem with the hierarchial fields in a Purchase order xml report

Hi,
I am having a problem with the hierarchy problem. We are populating attribute 15 of a PO header. some times it can be null. FYI, we are using 11.5.10 instance where oracle supports direct PO template rather than having a rdf file.
And now in the xml report, if attribute15 of po header is not null then it is fine.
But if attribute15 is null, then the template is picking from the next available attribute15 that is from the po lines. As the line level group of "LINES" is between the "PO_DATA" (header group), hence the template is checking for next available attribute15.
Can any one please suggest how to design the template where we can make the template to check only for that tag at the header level group rather than the line level group tag?
Thank You in advance.
Regards,
Srinivas.

Hi
Incase you want to transfer attachements from SRM to R/3, then you try implementing the BADI in SRM side. The BADI which will help in this case is
<b>BBP_CREATE_PO_BACK</b> BADI.
<b>Please read the standard SAP documentation of this BADI using SE18 Transaction, before making any code changes.</b>
<u>Few Important SAP OSS notes to refer in this case -></u>
Note 989184 - Transferred shopping cart with internal attachments
Note 550071 - FAQ: EBP - Shopping Cart
Note 916347 - Transfer shopping cart with internal attachments
Note 1001130 - FAQ - Attachment questions (Buyside)
<u>Few useful links -></u>
<b>http://help.sap.com/saphelp_srm50/helpdata/en/49/b32640632cea01e10000000a155106/frameset.htm
Re: Attachments to backend
Re: Document Attachments in Shopping Cart
Re: Attachment in SRM
Re: SRM Documents and Attachments
Re: Limit in Attachments of an item in Shopping Cart
Re: return delivery text from material document is not passed to SUS
</b>
Do let me know, incase you face any problems.
Regards
- Atul

Why do I get an "unable to connect - There may be a problem with the mail server or network." message from iCloud. I have verified the settings. I can access my iCloud account online but can't send or receive e-mail via the mail account.

Text limits to the "Question" link prevents a full explanation:
This is a long-time problem. I have tried to resolve it with Apple but their "Customer Support" is merely a name.
I can go online and access my e-mail but when I try to send or receive e-mail via iCloud through my internet server (Google fiber now but the same situation existed with my prior service), I receive "There may be a problem with the mail server or network. Verify the settings for 'Apple Email' and try again.
"The server returned the error: The server 'p0-imap.mail.me.com' refused to allow a connection on port 143."
Well, I have verified the setting and tried again and again and …
Well, you get the idea …

JungleTaxi Cabbie wrote:
Csound1: iCloud: Configuring Mail with Mac OS X v10.6 or iOS 4
Enter your Incoming Mail Server, User Name, and Password using the following settings:
Incoming Mail Server: mail.me.com
User Name: Your iCloud email address (excluding @me.com)
Password: Your password
Last Modified: Jun 27, 2013
Maybe you should test these things before calling people out, because these settings do function perfectly well.
iCloud is not supported on Snow Leopard or lower, why bother to mention it?
The OP has an iCloud account, and that can not be opened without Lion or Mountain Lion (on a Mac), IOS5 or 6 (on an iPhone/iPad)
The document I linked to is Apples documentation for iCloud on current devices,I don't care whether you believe that you know better than they do, but it will affect the people who follow your advice as it won't work
JungleTaxi Cabbie wrote:
Also, if you're not running Lion or Mountain Lion, there is no "Mail, Contacts & Calendars" prefpane.
I never said that there was, perhaps you imagined it.

Problem with the JFileChooser

Hello all,
I'm having a small problem with the JFileChooser, the thing is whenever I click the cancel button in the dialog box a NullPointerException is thrown, so does anyone know wut is wrong?

Either way, it's an extremely important skill to learn to read the API and become familiar with the tools you will use to program Java. Java has an extensive set of documentation that you can even download for your convenience. These "javadocs" are indexed and categorized so you can quickly look up any class or method. Take the time to consult this resource whenever you have a question - you'll find they typically contain very detailed descriptions and possibly some code examples.
Java� API Specifications
Java� 1.5 JDK Javadocs
Best of luck!
~

Programming generic sync with the MDK in 6.20

Has anyone been able to get the generic sync examples provided with the MDK working - GenericSyncExample.java in particular?
I imported and compiled the example without a problem but when I run it I get teh foll dump. Unfortunately the source code is not provided for the section which dumps so I cannot debug further...
Thanks
Ratna
2004-12-17 14:47:47 - Ctx( /NEWPROJECT ): Exception in: R( /NEWPROJECT + /start + null) - java.lang.NullPointerException
     at com.sap.ip.me.sync.SyncHeader.<init>(Unknown Source)
     at com.sap.ip.me.sync.SyncOutboundContainer.<init>(Unknown Source)
     at com.sap.ip.me.sync.SyncOutboundContainer.<init>(Unknown Source)
     at com.sap.ip.me.sync.ContainerFactory.createOutboundContainer(Unknown Source)
     at genericsyncexample1.GenericSyncExample.getUserInfo(GenericSyncExample.java:124)
     at genericsyncexample1.GenericSyncExample.doHandleEvent(GenericSyncExample.java:81)
     at com.sap.ip.me.api.runtime.jsp.AbstractMEHttpServlet.doPost(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java)
     at com.sap.ip.me.api.runtime.jsp.AbstractMEHttpServlet.service(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java)
     at org.apache.tomcat.core.ServletWrapper.doService(ServletWrapper.java:405)
     at org.apache.tomcat.core.Handler.service(Handler.java:287)
     at org.apache.tomcat.core.ServletWrapper.service(ServletWrapper.java:372)
     at org.apache.tomcat.core.ContextManager.internalService(ContextManager.java:806)
     at org.apache.tomcat.core.ContextManager.service(ContextManager.java:752)
     at org.apache.tomcat.service.http.HttpConnectionHandler.processConnection(HttpConnectionHandler.java:213)
     at org.apache.tomcat.service.TcpWorkerThread.runIt(PoolTcpEndpoint.java:416)
     at org.apache.tomcat.util.ThreadPool$ControlRunnable.run(ThreadPool.java:501)
     at java.lang.Thread.run(Thread.java:479)

Hello Ratna,
please be aware of the fact that a generic sync application needs a mobile solution descriptor (MSD) When you look at ther trace file in the log-directory of SAP ME you should find a similar entry:
"There is no MSD for current application (genericSyncExample)"
The missing MSD results in a missing conversation ID which leads to the NullpointerException that effectively is thrown in the class
ConversationIdHandler.getCurrentConversationId().
My current understanding is that the only way to get a MSD assigned, is to upload the application to the web console and install it from there on the client device.
However, this means that launching a genSync ME application from Eclipse is useless. I am wondering, if this is the way it was intended to be....
Best regards,
Tim

Problems with the wifi

Hi, I have some problems with the connection to the wifi. I use a USB wifi pen from Belkin that uses the zd1211-firmware. I don't remember now the model but I think it isn't important because my wlan0 interface is recognized perfectly, I installed properly the firmware (although I think that it was installed yet) and in fact, i can connect to internet manually.
Always I'm connected to the same wifi connection then I don't need special configurations to laptops, but I want to use dhcp. Then, in /etc/rc.conf I added wlan0="dhcp", wlan_wlan0="wlan0 essid ... key s:..." and, of course, I added wlan0 to the list of interfaces.
The problem is that when I start the computer the connection fails and to connect I must do manually the next:
ifconfig wlan0 up
iwconfig wlan0 essid.... (the same thing I put on /etc/rc.conf)
dhcpcd wlan0
On one hand, I would like that internet works automatically (provisionally I add the three lines to rc.local)
On the other hand, I want that I can choice the internet connection graphically from the desktop environment (kde, in my case), since now it doesn't shows nothing about internet connection, it simply works because my trick on rc.local, and I can't choice another wifi connection if I would.
Thank you for your help.

Wireless is not meant to be configured in rc.conf (which is documented in rc.conf itself if you have kept it up to date).
If you have just one network connection, install netcfg, it has plenty of sample configurations, among which one for WEP.

ITS 6.20 SP18 Problem with the top bar menus

Hello Henning,
we're using ITS 6.20 SP18 and experience a problem with the top bar menus in the SAPGUI for HTML (Enjoy Design) in both MSIE 6 and Moz Firefox 1.0.4.
When clicking the dropdown menus in the top bar the menu simply won't open. This only occurs in all of our homegrown (Z*) services when dropping into SAPGUI for HTML (ITS is in mixed mode). However - When running service WEBGUI seperately (via ...scripts/wgate/WEBGUI/! ) the menus work funnily enough.
This worked fine prior to the upgrade. Is there a new service parameter that I need to set? Have you got any more documentation? I checked out any related SAPNet notes on the SP18 documentation sheet, but couldn't find anything related.
Kind regards,
Michael

> There is no known problem regarding ITS 6.20 PL 18
> and the menu at this time. Please provide an example
> for a service file (.srvc) of one of your Z
> services and also the global.srvc.
>
<u>These are the <b>global.srvc</b> settings</u>
~appserver
~client 010
~clientcert 1
~cookies 1
~exiturl
~hostsecure xxxxxxxxx
~hostunsecure xxxxxxxxx
~language
~login
~logingroup ZZZZZZZZ
~menu2002 0
~messageserver xxxxxxxx.xx.xx.xx
~multiinstanceservices 1
~password
~portsecure 443
~portunsecure 80
~routestring
~runtimemode pm
~systemname XXX
~systemnumber 00
~theme 99
~timeout 120
~urlarchive /scripts/sapawl.dll
~urlimage /sap/its/graphics
~urlmime /sap/its/mimes
~usertimeout 1
~webgui_theme 99
~xgateway sapdiag
~xgateways sapxgadm,sapdiag,sapxgwfc,sapxginet,sapxgbc,sapextauth
~rfctimeout     10
~noheaderokcode 1
~http_use_compression 1
~http_compress_level 7
~mysapcomnosso1cookie 1
<u>These are the service settings for one of our <b>Z* services</b>:</u>
~AUTOSCROLL     0
~COOKIES     1
~GENERATEDYNPRO     1
~HTTP_COMPRESS_LEVEL     9
~HTTP_USE_COMPRESSION     1
~LISTSCROLLING     0
~LOGIN
~PASSWORD
~POPUPS     1
~STYLE     DHTML
~TRANSACTION     Zxxxxx
~WEBGUI
~WEBGUI_POPUPS     1
~WEBGUI_THEME     99
Kind regards,
Michael

Problems with the ipod

I have already researched this problem to the max, so any other suggestions are welcome, but I have already read all the discussions on it as well as the Apple Documentation. I am coming here on the off chance someone knows soemthing and so I can document for the benefit of other ipod users.
I get "Disk cannot be read from or written to" when trying to synch ipod. The error message does vary a bit.
I have seen other users referred to this artile.
http://docs.info.apple.com/article.html?artnum=301267
This documentation is pretty useless as it says that everything can be wrong.
So far I have restored my ipod many times, formatted it for windows, checked it for errors in windows, updated my ipod software, updated itunes, tried various methods described all to no avail. It is not a problem with a specific file because I have tried transferring only 100 out of the 2500 files in my collection to no avail.
I will try updating my ipod from a different computer with a different library of music later tonight. So far I have not had access to a computer with a firewire drive so that I can make sure it's not a problem with the USB cord or interface.
Suggestions are welcome! If updating it with another comp does not work I guess I'll try to use the ipods warranty. If that doesn't work I'll try to replace the harddrive myself.

I have already researched this problem to the max, so any other suggestions are welcome, but I have already read all the discussions on it as well as the Apple Documentation. I am coming here on the off chance someone knows soemthing and so I can document for the benefit of other ipod users.
I get "Disk cannot be read from or written to" when trying to synch ipod. The error message does vary a bit.
I have seen other users referred to this artile.
http://docs.info.apple.com/article.html?artnum=301267
This documentation is pretty useless as it says that everything can be wrong.
So far I have restored my ipod many times, formatted it for windows, checked it for errors in windows, updated my ipod software, updated itunes, tried various methods described all to no avail. It is not a problem with a specific file because I have tried transferring only 100 out of the 2500 files in my collection to no avail.
I will try updating my ipod from a different computer with a different library of music later tonight. So far I have not had access to a computer with a firewire drive so that I can make sure it's not a problem with the USB cord or interface.
Suggestions are welcome! If updating it with another comp does not work I guess I'll try to use the ipods warranty. If that doesn't work I'll try to replace the harddrive myself.

Problem with the MVMapView.print(printMapDiv,) function.

Hello,
I have a problem with the MVMapView.print(printMapDiv,) function.
My FOIs are displayed correct on the screen but on the printed letter
the stroke(border) color and the labels of a circle are not displayed.
the fois have a custom style:
var xmlDef = '<svg width="1in" height="1in">'+
'<g class="marker" '+
'style="width:40;height:40;stroke:0xff0000;fill:0x00ff00;stroke-width:1.5">'+
'<circle r="20"/>'+
'</g>'+
'</svg>';
markerStyle = new MVXMLStyle("my_vector_icon_" + i + '_' + j, xmlDef)
and are created like this:
v_result = new MVFOI(p_geofeature.foiId, p_geofeature.foiGeomertyObject, markerStyle, null, 30, 30);
v_result.setHTMLElement('1',0,0);
Browser: I can see the map with a green circle, a red border and '1' as a label on
top of the Circle.
Printed Letter: I see the map with the green circle but no red border Color and no label.
The implmentation of the printing function uses the same techique like the "Oracle Maps Tutorial"
It is a javascript function called through a href link:
function mapPrint()
var a=document.getElementById("printmap");
global_gdi.mapviewer.mapview.print(a);
Version is Ver11_1_1_5_B110527
Does anbody know how to print the map properly including the contents of the
MVFOI class set trough setHTMLElement function?
Greetings
Andre

Thanks for your reply but it is not working and i can prove that.
I have a small example based on the mapviewer print tutorial. To run it you need a
mapviewer installation and copy the text into a html file. In the browser you can see
a green point with a red border and red label text on a map.
If you use the print button everything except the label text will be printed.
I think this is a mapviewer css-api bug.
<html>
<head>
<META http-equiv="Content-Type" content="text/html; charset=UTF-8">
<style type="text/css">
@media screen
.noscreen {display: none;}
@media print
.noprint{display: none;}
</style>
<script language="Javascript" src="/mapviewer/fsmc/jslib/oraclemaps.js"></script>
<script language=javascript>
var mapview;
var baseURL = "http://"+document.location.host+"/mapviewer";
function showMap()
mapview = new MVMapView(document.getElementById("map"), baseURL);
mapview.addMapTileLayer(new MVMapTileLayer("mvdemo.demo_map"));
mapview.setCenter(MVSdoGeometry.createPoint(-122.45, 37.6706,8307));
mapview.setZoomLevel(4);
mapview.display();
//adds custom foi with label
var xmlDef = '<svg width="1in" height="1in">'+
'<g class="marker" '+
'style="width:40;height:40;font-family:sans-serif;font-size:20pt;stroke:0xff0000;fill:0x00ff00;stroke-width:1.5">'+
'<circle r="20"/>'+
'</g>'+
'</svg>';
var markerStyle = new MVXMLStyle("my_vector_icon_", xmlDef);
mpoint = MVSdoGeometry.createPoint(-122.30, 37.73,8307);
var v_result = new MVFOI("11", mpoint, markerStyle, null, 60, 60);
v_result.setHTMLElement('test label',0,0);
mapview.addFOI(v_result);
function mapPrint()
var a=document.getElementById("printmap");
mapview.print(a);
</script>
</head>
<body onload=javascript:showMap()>
<div id="map" style="position:absolute;top:50px; left:10px; width:600px; height:450px;border:0px"></div>
<div id="printmap" class="noscreen"></div>
<p>Please click <a href="javascript:mapPrint()">here</a> to print map</p>
</body>
</html>
Edited by: user12005064 on 27.02.2012 02:37

Problems with the posting period....

Hi guys,
every once in a while the old problem with the posting periods occurs. This morning it hit me and I went out to repair it.
Starting out from MMRV I checked the open period and it said 062009.
Using MMPV, by mistake, I opened 112009, so that I'm able to post to 112009 PLUS the previous period 102009 (which is ok so far). Later on I checked OB52 to see, if finance is not the problem. The opened period lasts from 012009 to 122009.
Long story short: everything seems perfectly alright, however it still doesn't work. It says: Posting only possible in periods 2009/11 and 2009/10 in company code 1000
I don't see where there could be a problem now...
Any help is greatly appreciated!
Thx & regards,
Bobby

Hi,
It is possible to re-open a previously closed period. However, it is NOT advisable to do so because the valuation data of the previous period could be affected.
In general, it is only safe to reopen a previously closed period when no material postings have been done after the period shifting to the new period.
If there has already been postings after the period shifting to the new period, reverting the period back will cause database inconsistencies in the history tables.
If you decide to proceed with this process, you can use the program RMMMINIT, but, please review the documentation of this program first!! and the check the SAP notes 487381 (for the error message that you are receiving) and the 369637 (for an explanation about the inconsistencies that will be generated.
Steps are as below;
Go to Transaction Code SE38
Enter program name RMMMINIT
Execute or press F8 function button
Enter your company code (From and To)
Enter relevant date: Say 01/10/2009 for Oct. 2009 month to be opened as of now
That means, user can post for the month of sept 2009 as well as Oct. 2009
Refer SAP Note No. 487381 for more details.
As per SAP Notes 487381 ( If the periods are opened in advance in mmpv to again change it to current period the following process should be follow ), Go to Tcode MMPI, then go to menu bar and select system -> user profile->owndata.In that screen , under the parameters tab enter MMPI_READ_NOTE in Parameter ID field and enter, then under short description you will get Initialise period. Next Save.
Again go to MMPI enter company code, period and year and execute.
Other way of doing it is follow these steps: ( *TRY in Sandbox But do not try in PRODUCTION SYSTEM*)
1. Use t.code: OX18, and delete the plants assigned to your CO.Cd and save.
2. Use t.code: OMSY and change the posting period to the one u want and save.
3.Go to OX18 and assign the plants you have deleted in step 1.and save.
Regards,
Biju K

I just order 8 calendars from iPhoto and they came to me fine. Now I need to order two more but when I go thru the process I get a message saying:unable to assemble calendar. There is a probleme with the photo with the file name"(Null)" more........ .

Would someone be able to explain to me the following issue with Iphoto?
I ordered 8 same calendars for my soccer team and received them fine. Although a couple of pictures on it are a little off (out of focus). I need to order two more of the same calendars but when I go thru the process ireceive an error message saying:
"Unable to to assemble calendar" There is a problem with the photo with the file name "(Null)" The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your calendar.
How can I fine this "corrupt" photo? How did it go thru with the first batch of calendars but won't go thru now?
Thank you for your help.

Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

I can not upgrade to quicktime 7.7.3 for windows vista. Error message says there is a problem with the program installer. Any clue as to how to get around this.

I can not download quicktime 7.7.3 for windows vista. The error message says that there is a problem with the windows installer. Any clues?

The error message says that there is a problem with the windows installer.
What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.)

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

Problems with the Tutorial in the MDK Documentation

Similar Messages

Maybe you are looking for